A recently added unit test found that prepare_cmdline has several
problems. For example an empty remove list will remove all spaces or
when the cmdline contains a parameter with quoted values containing
spaces will only remove the beginning up to the first space. Furthermore
the old design requires lots of subshells and pipes.
This patch rewrites prepare_cmdline in a way that makes the unit test
happy and tries to use as many bash built-ins as possible.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Move the workaround for aws graviton cpus from load_kdump to
prepare_cmdline. This (1) makes the workaround available also for other
callers of prepare_cmdline (although not needed at the moment) and (2)
makes it easier to fix the problems found by the unit test included
earlier as all changes to the cmdline are done at one place now.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
prepare_cmdline is totally broken. For example if the remove list ($2)
is empty it removes all white spaces or if a parameter has a quoted
value containing a white space it only removes the first part of the
parameter up to the first space. Thus add a test case that shows what the
function should do in order to fix it in subsequent patches.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
is_squash_available is only used in dracut-module-setup.sh and mkdumprd.
Neither of the two scripts calls prepare_kdump_bootinfo which determines
and sets KDUMP_KERNELVER. Thus KDUMP_KERNELVER is only non-zero if it
explicitly specified by the user in /etc/sysconfig/kdump (and the file
gets sourced, which is not the case for drachu-module-setup.sh).
In theory this can even lead to bugs. For example consider the case when
a debug kernel is running. In that case kdumpctl will try to use the
non-debug version of the kernel while is_squash_available will make its
decision based on the debug version. So in case the debug kernel has
squash available but the non-debug kernel doesn't mkdumprd will try to
add it nevertheless.
Thus factor out the kernel version detection from prepare_kdump_bootinfo
and make use of the new function when checking for the availability of
those kernel modules.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
mkfadumprd doesn't call prepare_kdump_bootinfo from kdump-lib.sh. Thus
both KDUMP_KERNELVER and DEFAULT_INITRD are always empty. Simply remove
them from the debug print.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Both functions are almost identical. The only differences are (1) the
sysfs node the status is read from and (2) the fact the fadump version
doesn't verify if the file it's trying to read actually exists. Thus
merge the two functions and get rid of the check_current_status wrapper.
While at it rename the function to is_kernel_loaded which explains
better what the function does.
Finally, after moving FADUMP_REGISTER_SYS_NODE shellcheck can no longer
access the definition and starts complaining about it not being quoted.
Thus quote all uses of FADUMP_REGISTER_SYS_NODE.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Currently dracut-early-kdump.sh claims to be POSIX compliant but it
sources kdump-lib.sh which uses bash-only syntax. Thus require bash for
dracut-early-kdump.sh as well.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Fix the following issues found by shellcheck. For the second one disable
shellcheck as EARLY_KEXEC_ARGS can contain multiple arguments.
In dracut-early-kdump.sh line 9:
EARLY_KDUMP_KERNELVER=""
^-------------------^ SC2034: EARLY_KDUMP_KERNELVER appears unused. Verify use (or export if used externally).
In dracut-early-kdump.sh line 61:
if $KEXEC $EARLY_KEXEC_ARGS $standard_kexec_args \
^---------------^ SC2086: Double quote to prevent globbing and word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2034https://www.shellcheck.net/wiki/SC2086
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
With the deprecation of the 'default' option in kdump.conf
check_failure_action_config needed to track which option was used
(default or failure_action). This made the function quite complex.Thus
make option 'default' a true alias of 'failure_action' when parsing
kdump.conf and simplify check_failure_action_config.
Do the same simplifications for check_final_action_config as both
functions are basically identical.
Signed-off-by: Philipp Rudo <prudo@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
Resolves: bz2155754
Upstream: https://github.com/makedumpfile/makedumpfile
Conflict: None
commit 5f17bdd2128998a3eeeb4521d136a192222fadb6
Author: Kazuhito Hagio <k-hagio-ab@nec.com>
Date: Wed Dec 21 11:06:39 2022 +0900
[PATCH] Fix wrong exclusion of slab pages on Linux 6.2-rc1
* Required for kernel 6.2
Kernel commit 130d4df57390 ("mm/sl[au]b: rearrange struct slab fields to
allow larger rcu_head"), which is contained in Linux 6.2-rc1 and later,
made the offset of slab.slabs equal to page.mapping's one. As a result,
"makedumpfile -d 8", which should exclude user data, excludes some slab
pages wrongly because isAnon() returns true when slab.slabs is an odd
number. With such dumpfiles, crash can fail to start session with an
error like this:
# crash vmlinux dumpfile
...
crash: page excluded: kernel virtual address: ffff8fa047ac2fe8 type: "xa_node shift"
Make isAnon() check that the page is not slab to fix this.
Signed-off-by: Kazuhito Hagio <k-hagio-ab@nec.com>
Reported-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Currently when using anaconda to install the OS, the following errors
occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-70.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
...
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 ...
INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
Or for s390, the following errors occur,
INF packaging: Configuring (running scriptlet for): kernel-core-5.14.0-71.el9.s390x ...
03:37:51,232 INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
grep: /etc/zipl.conf: No such file or directory
INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9_1.el9_0.s390x ...
INF dnf.rpm: grep: /etc/zipl.conf: No such file or directory
This is because when anaconda installs the packages, bootloader hasn't
been installed and /boot/grub2/grubenv or /etc/zipl.conf doesn't exist.
So don't try to update crashkernel when bootloader isn't ready to avoid
the above errors.
Note this is the second attempt to fix this issue. Previously a file
/tmp/kexec_tools_package_install was created to avoid running the
related code thus to avoid the above errors but unfortunately that
approach has two issues a) somehow osbuild doesn't delete it for RHEL b)
this file could still exist if users manually remove kexec-tools.
Fixes: e218128 ("Only try to reset crashkernel for osbuild during package install")
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Hyper-V VM with accelerated networking
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151842
Currently, vmcore dumping to remote fs fails on Azure Hyper-V VM with
accelerated networking because it uses a physical NIC for accrelarated
networking [1]. In this case, the driver for this physical NIC should be
installed as well.
[1] https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
Fixes: a65dde2d ("Reduce kdump memory consumption by only installing needed NIC drivers")
Reported-by: Xiaoqiang Xiong <xxiong@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
interface
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151500
Currently, kdump initrd fails to be built when dumping vmcore to
localhost via ssh or nfs,
kdumpctl[3331]: Cannot get driver information: Operation not supported
kdumpctl[1991]: dracut: Failed to get the driver of lo
dracut[2020]: Failed to get the driver of lo
kdumpctl[1775]: kdump: mkdumprd: failed to make kdump initrd
kdumpctl[1775]: kdump: Starting kdump: [FAILED]
systemd[1]: kdump.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: kdump.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Crash recovery kernel arming.
systemd[1]: kdump.service: Consumed 1.710s CPU time.
This is because the loopback interface is used for transferring vmcore and
ethtool can't get the driver of the loopback interface. In fact, once
COFNIG_NET is enabled, the loopback device is enabled and there is no driver
for the loopback device. So skip installing driver for the loopback device.
The loopback interface is implemented in linux/drivers/net/loopback.c
and always has the name "lo". So we can safely tell if a network
interface is the loopback interface by its name.
Fixes: a65dde2d ("Reduce kdump memory consumption by only installing needed NIC drivers")
Reported-by: Martin Pitt <mpitt@redhat.com>
Reported-by: Rich Megginson <rmeggins@redhat.com>
Reviewed-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2149246
Latest Workstation live x86_64 image has an excess increase of ~300 MB
in size. This is because kdumpbase module's trap handler overwrites
dracut's handler and DRACUT_TMPDIR which has three unpacked initramfs
files fails to be cleaned up. This patch moves kdumpbase module's
temporary folder under DRACUT_TMPDIR and lets dracut's trap handler do
the cleanup instead.
Fixes: d25b1ee3 ("Add functions to copy NetworkManage connection profiles to the initramfs")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
With kernel commit 607451ce0aa9b ("powerpc/fadump: register for fadump
as early as possible"), 'kdumpctl start' prematurely returns with the
below message:
"Kdump already running: [WARNING]"
instead of setting default initrd with dump capture capability as
required for fadump. Skip status check in fadump mode to avoid this
problem.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Kdump service will create fadump initramfs when needed, but it won't
clean up the fadump initramfs on kernel uninstall. So create a kernel
install hook to do the clean up job.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
In case of fadump, default initrd is rebuilt with dump capturing
capability, as the same initrd is used for booting production kernel
as well as capture kernel.
The original initrd file is backed up with a checksum, to restore
it as the default initrd when fadump is disabled. As the checksum
file is not kernel version specific, switching between different
kernel versions and kdump/fadump dump mode breaks the default initrd
backup/restore logic. Fix this by having a kernel version specific
checksum file.
Also, if backing up initrd fails, retaining the checksum file isn't
useful. Remove it.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
If available, use 'zstd' compression method to optimize the size of
the initrd built with fadump support. Also, 'squash+zstd' is not
preferred because more disk space is consumed with 'squash+zstd' due
to the additional binaries needed for fadump with squash case.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently _find_kernel_path_by_release uses grubby and grep to
find the kernel path, if both the normal kernel and it's debug
varient exist, the grep will give more than one kernel strings.
```
kernel="/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x+debug"
kernel="/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x"
```
This will cause an error when installing debug kernel.
```
The param "/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x+debug
/boot/vmlinuz-5.14.0-139.kpq0.el9.s390x" is incorrect
```
Fixes: 945cbbd ("add helper functions to get kernel path by kernel release and the path of current running kernel")
Signed-off-by: Lichen Liu <lichliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Now, kdump.conf is generated by gen-kdump-conf.sh, hence adapting
check_config to run that script firstly then check the generated file.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Coiby Xu <coxu@redhat.com>
This commit has the same motivation as the commit 677da8a "sysconfig:
use a simple generator script to maintain".
At present, only the kdump.conf generated for s390x has a slight
difference from the other arches, where the core_collector asks the
makedumpfile to use "-c" option to compress dump data by each page using
zlib, which is more efficient than lzo on s390x.
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
network interfaces
Currently, dumping to iSCSI target fails because the global array
(unique_netifs) that stores the network interfaces needed by kdump is
empty. The root cause is change of the array made in a subshell (a child
process) is inaccessible to the parent process. So don't run
kdump_check_setup_iscsi in a subshell.
Fixes: 63c3805c ("Set up kdump network by directly copying NM connection profile to initrd")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Pingfan Liu <piliu@redhat.com>
/usr/lib/udev/ccw_init [1] shipped by s390utils extracts the values of
SUBCHANNELS, NETTYPE and LAYER2 from /etc/sysconfig/network-scripts/ifcfg-*
or /etc/NetworkManager/system-connections/*.nmconnection to activate znet
network device. If the connection profile is copied to initrd,
there is no need to set up the "rd.znet" dracut cmdline parameter.
There are two cases addressed by this commit,
1. znet network interface is a slave of bonding/teaming/vlan/bridging
network. The connection profile has been copied to initrd by
kdump_copy_nmconnection_file and it contains the info needed by
ccw_init.
2. znet network interface is a slave of bonding/teaming/vlan/bridging
network. The corresponding ifcfg-*/*.nmconnection file may not contain
info like SUBCHANNELS [2]. In this case, copy the ifcfg-*/*.nmconnection
file that has this info to the kdump initrd. Also to prevent the copied
connection profile from being chosen by NM, set
connection.autoconnect=false for this connection profile.
With this implementation, there is also no need to check if znet is
used beforehand.
Note
1. ccw_init doesn't care if SUBCHANNELS, NETTYPE and LAYER2 comes from
an active NM profile or not. If an inactive NM profile contains this
info, it needs to be copied to the kdump initrd as well.
2. "rd.znet_ifname=$_netdev:${SUBCHANNELS}" is no longer needed needed
because now there is no renaming of s390x network interfaces when
reusing NetworkManager profiles. rd.znet_ifname was introduced in
commit ce0305d ("Add a new option 'rd.znet_ifname' in order to use it
in udev rules") to address the special case of non-persistent
MAC address by renaming a network interface by SUBCHANNELS.
[1] https://src.fedoraproject.org/rpms/s390utils/blob/rawhide/f/ccw_init
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2064708
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
nm-wait-online-initrd.service installed by dracut's 35-networkmanager
module calls nm-online with "-s" which means it returns immediately when
NetworkManager logs "startup complete". Thus it doesn't truly wait for
network connectivity to be established [1]. Wait for the network to be
truly ready before dumping vmcore. There are two benefits brought by
this approach,
- ssh/nfs dumping won't fail because of that the network is not
ready e.g. [2][3]
- users don't need to use workarounds like rd.net.carrier.timeout to
make sure the network is ready
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1485712
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1909014
[3] https://bugzilla.redhat.com/show_bug.cgi?id=2035451
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
A NIC may get a different name in the kdump kernel from 1st kernel
in cases like,
- kernel assigned network interface names are not persistent e.g. [1]
- there is an udev rule to rename the NIC in the 1st kernel but the
kdump initrd may not have that rule e.g. [2]
If NM tries to match a NIC with a connection profile based on NIC name
i.e. connection.interface-name, it will fail the above bases. A simple
solution is to ask NM to match a connection profile by MAC address.
Note we don't need to do this for user-created NICs like vlan, bridge and
bond.
An remaining issue is passing the name of a NIC via the kdumpnic dracut
command line parameter which requires passing ifname=<interface>:<MAC> to
have fixed NIC name. But we can simply drop this requirement. kdumpnic
is needed because kdump needs to get the IP by NIC name and use the IP
to created a dumping folder named "{IP}-{DATE}". We can simply pass the
IP to the kdump kernel directly via a new dracut command line parameter
kdumpip instead. In addition to the benefit of simplifying the code,
there are other three benefits brought by this approach,
- make use of whatever network to transfer the vmcore. Because as long
as we have the network to we don't care which NIC is active.
- if obtained IP in the kdump kernel is different from the one in the
1st kernel. "{IP}-{DATE}" would better tell where the dumped vmcore
comes from.
- without passing ifname=<interface>:<MAC> to kdump initrd, the
issue of there are two interfaces with the same MAC address for
Azure Hyper-V NIC SR-IOV [3] is resolved automatically.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1121778
[2] https://bugzilla.redhat.com/show_bug.cgi?id=810107
[3] https://bugzilla.redhat.com/show_bug.cgi?id=1962421
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
By default, NetworkManger will manage all the network interfaces and
try to set interface IFF_UP to get carrier state. Regardless of whether
the network interface is connected to a cable or not, the NIC driver
will allocate memory resources for e.g. ring buffers when setting IFF_UP.
This could be a waste of memory. For example it's found i40e consumes ~15GB
on a power machine. On this machine, i40e manages four interfaces but only
one interface is valid. This patch use "managed=false" to tell
NetworkManager to not manage network interfaces that are not needed by
kdump by putting 10-kdump-netif_allowlist.conf in the initramfs.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
This patch setup kdump network by directly copying NM connection profile(s)
for different network setup including bond, bridge, vlan, and team. For
vlan network, rename phydev to parent_netif to improve code readability.
With the new approach, the related code to build up dracut cmdline
parameter such rd.route, ip and etc can be cleaned up. And there is no
need to setup dns when copying .nmconnection directly to initrd
either. Note the bootdev dracut command line parameter is only used by
dracut's 35network-legacy and network-manager doesn't use it, remove
related code as well.
Note
1. kdump_setup_vlan/bond/... are no longer called in subshells in order
to modify global variables like unique_netifs
2. The original kdump_install_net is renamed to better reflect its
current function
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
kexec-tools depends on dracut's 35network-manager module which will
call nm-initrd-generator. We don't want nm-initrd-generator to generate
connection profiles since we will copy them from 1st kernel to
kdump kernel initramfs. NetworkManager >= 1.35.2 won't generate connection
profiles if there's a connection dir with rd.neednet. For Fedora/RHEL,
this connection dir is /etc/NetworkManager/system-connections. For the
details, please refer to the NetworkManager commit 79885656d3
("initrd: don't add a connection if there's a connection dir with
rd.neednet") [1]. Before the release of NetworkManager >= 1.35.2, we
need to mask /usr/libexec/nm-initrd-generator.
[1] https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/merge_requests/1010
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
nm-wait-online-initrd.service installed by dracut's 35-networkmanager
module calls nm-online with "-s" which means it returns immediately when
NetworkManager logs "startup complete" after certain timeouts are
reached. "startup complete" doesn't necessarily network connectivity has
been established. nm-initrd-generator has a set of timeouts that in most
of cases when applied, "startup-complete" means network connectivity has
been established. So apply it when setting up kdump network.
Suggested-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
According to `man nm-online`,
"By default, connections have the ipv4.may-fail and
ipv6.may-fail properties set to yes; this means that
NetworkManager waits for one of the two address families to
complete configuration before considering the connection
activated. If you need a specific address family configured
before network-online.target is reached, set the corresponding
may-fail property to no."
If a NIC has an IPv4 or IPv6 address, set the corresponding may-fail
property to no. Otherwise, dumping vmcore over IPv6 could fail because
only IPv4 network is ready or vice versa.
Also disable IPv6 if only IPv4 is used and vice versa.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Each network interface is manged by a NM connection. Given a list of
network interface names, copy the NetworkManager (NM) connection
profiles i.e. .nmconnection files to the kdump initramfs.
Before copying a connection file, clone it to automatically convert a
legacy ifcfg-*[1] file to a .nmconnection file and for the convenience of
editing the connection profile.
[1] https://fedoraproject.org/wiki/Changes/NetworkManager_keyfile_instead_of_ifcfg_rh
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
6f9235887f ("module-setup.sh: enable
vlan on team interface") skips establishing teaming network by mistake.
Although it could use one of slave netifs to establish connection
to transfer vmcore to remote fs, it breaks the implicit assumption of
creating an identical network topology to the 1st kernel.
Fixes: 6f92358 ("module-setup.sh: enable vlan on team interface")
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Thomas Haller <thaller@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, kexec-tools tries to reset crashkernel when using anaconda to
install the system. But grubby isn't ready and complains that,
10:34:17,014 INF packaging: Configuring (running scriptlet for): kexec-tools-2.0.23-9.el9.x86_64 1646034766 53ff7158f8808774f4e3c3c87e504aa7a6d677b537754dac86c87925c8f0a397
10:34:17,205 INF dnf.rpm: grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
grep: /boot/grub2/grubenv: No such file or directory
kexec-tools is supposed to update the kernel crashkernel parameter after
package upgrade. Unfortunately, the posttrans RPM scriptlet doesn't
distinguish between package install and upgrade. This patch skips
reset_crashkernel_after_update as similar to e218128e ("Only try to
reset crashkernel for osbuild during package install").
Reported-by: Jan Stodola <jstodola@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
When the dump target is lvm2 thinp, if we didn't mount
the dump target first, get_fs_type_from_target will get
empty output:
Before mount:
$ get_fs_type_from_target /dev/vg00/thinlv
After mount:
$ mount /dev/vg00/thinlv /mnt
$ get_fs_type_from_target /dev/vg00/thinlv
ext4
As a result, kdumpctl start will fail with:
$ kdumpctl start
kdump: Dump target is invalid
kdump: Starting kdump: [FAILED]
This patch fix the issue by bypassing check_fs_modified
when the dump target is lvm2 thinp.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Coiby Xu <prudo@redhat.com>
F36 has dropped support on ifcfg and as a result current network tests
fails. Use .nmconnection to set up test network instead.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
With commit fa9201b2 ("fadump: isolate fadump initramfs image within
the default one"), initramfs image gets to hold two images, one for
production kernel boot purpose and the other for capture kernel boot.
Most files are common among the two images. Retain file modification
time to replace duplicate files with hardlinks and save space. Also,
avoid unnecessarily compressing fadump image that is decompressed
immediately anyway.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
With commit fa9201b2 ("fadump: isolate fadump initramfs image within
the default one"), initramfs image gets to hold two squash images, one
for production kernel boot purpose and the other for capture kernel
boot. Having separate images improved reliability for both production
kernel and capture kernel boot scenarios, but the size of initramfs
image became considerably larger.
Instead of having squash images, compressing $initdir without using
squash images reduced the size of initramfs image for fadump case by
around 30%. So, avoid using squash for fadump case.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Previously, all files within $TESTCASEDIR/$test_case are regarded
as shell script files for testing. However there might be config
files under the directory. So let's only iterate the .sh files.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
The 80lvmthinpool-monitor module is needed for monitor and
autoextend the size of thin pool in 2nd kernel. The module was
integrated in dracut version 057.
If lvmthinpool-monitor module is not found, we will print a warning.
Because we don't want to block the kdump process when the thin pool
capacity is enough and no monitor-and-autoextend actually needed.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
lvm2 relies on /etc/lvm/lvm.conf to determine its behaviour. The
important configs such as thin_pool_autoextend_threshold and
thin_pool_autoextend_percent will be used during kdump in 2nd
kernel. So if the file is modified, the initramfs should be
rebuild to include the latest.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
We need to check if a directory or a device is lvm2 thinp target.
First, we use get_block_dump_target() to convert dump path into
block device, then we check if the device is lvm2 thinp target by
cmd lvs.
is_lvm2_thinp_device is now located in kdump-lib-initramfs.sh, for it
will be used in 2nd kernel. is_lvm2_thinp_dump_target is located in
kdump-lib.sh, for it is only used in 1st kernel, and it has dependencies
which exist in kdump-lib.sh.
Signed-off-by: Tao Liu <ltao@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Currently, updating kexec-tools on s390x gives the warning
sed: can't read /etc/default/grub: No such file or directory
This happens because s390x doesn't use GRUB and /etc/default/grub
doesn't exist. We need to skip both reading and writing to
/etc/default/grub.
Reported-by: Jie Li <jieli@redhat.com>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
