Commit Graph

252 Commits

Author SHA1 Message Date
Dave Young
009b983103 Release 2.0.3-64 2013-01-04 14:14:16 +08:00
Dave Young
b865438443 Pull patch kexec-tools-2.0.3-ppc-exec-stack-fix.patch
fix issue of exec on stack for ppc32
2012-12-21 15:19:55 +08:00
Dave Young
440fc959ee Release 2.0.3-63 2012-12-21 11:37:01 +08:00
Dave Young
f9171d8a4d Release 2.0.3-62 2012-12-21 10:45:32 +08:00
Dave Young
3f0ba9aab7 Release 2.0.3-61 2012-12-12 17:17:07 +08:00
Dave Young
b30fee648c Release 2.0.3-60 2012-12-10 13:56:44 +08:00
Dave Young
7635d4f5db makedumpfile 1.5.1 2012-12-10 13:43:00 +08:00
Dave Young
3b4929edb3 Release 2.0.3-58 2012-11-16 14:20:12 +08:00
dyoung@redhat.com
2c20a30420 Enable kdump service after installation
Kdump systemd service should be enabled after installation like what
we do for old sysv init service.

systemctl enable will do daemon-reload automaticlly, so no need to
reload the daemon again. Please see manpage of systemctl about the detail.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-11-16 14:17:06 +08:00
Dave Young
0f8bd150db Release kexec-tools-2.0.3-58 2012-10-25 17:33:26 +08:00
Dave Young
1cbfc5626e Pull two patches from upstream
bz865162
Someone need this for kexec to load memdisk which is smaller then 32k.
kexec-tools-2.0.3-Load-bzImages-smaller-than-32-KiB.patch

bz849650, for efi booting system we need this acpi_rsdp kernel argument
after vivek's secure boot work we maybe need drop this one.
kexec-tools-2.0.3-kdump-pass-acpi_rsdp-to-2nd-kernel-for-efi-booting.patch
2012-10-25 17:07:19 +08:00
Dave Young
c248af077b Release 2.0.3-57 2012-10-11 09:47:25 +08:00
Dave Young
3c2d53ebfd Release 2.0.3-56 2012-09-29 13:24:17 +08:00
Dave Young
7468d46e9c Pull vmcore-dmesg patches from vivek
Add below two commits from upstream:
1.
commit c96e7736d85e40685939011e6d51b3c0a28739a3
Author: Vivek Goyal <vgoyal@redhat.com>
Date:   Wed Jul 18 09:33:51 2012 -0400

    vmcore-dmesg: Do not write beyond end of buffer

    scan_vmcoreinfo() currently assumes that every vmcoreinfo note line ends
    with \n and overwrites new line with \0. But last entry in note, CRASHTIME=
    does not end with \n and this leads to corrupting memory as we write beyond
    end of buffer.

    Normally things were fine but when I added some fields to vmcoreinfo, this
    bug started showing and vmcore-dmesg started crashing.

    I am planning to send a patch to fix this in kernel but it might be good
    idea to handle this case in user space too so that vmcore-dmesg works
    fine with cores of older kernels.

    Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
    Signed-off-by: Simon Horman <horms@verge.net.au>
2.
commit df88cab364cd1a3b8c992042d62efe5e350e6b2a
Author: Vivek Goyal <vgoyal@redhat.com>
Date:   Mon Jul 30 13:32:48 2012 -0400

    vmcore-dmesg: vmcore-dmesg: Make it work with new structured logging format

    Now kernel has made kernel logging structured and exsisting vmcore-dmesg
    does not work with this new format. Hence kernel version 3.5 is broken. In
    3.6 now a kernel patch has been put which exports relevant fields. This
    patch parses those fields and makes vmcore-dmesg work with new logging
    format.

    Currently it does not display log levels or dictionary. I personally think
    that log levels are not very useful and it also requires additional kernel
    patches so that log levels are not bitfields and relevant information is
    exported to user space properly.

    Concept of dictionary is new and relevant information is exported. One can
    possibly enahnce vmcore-dmesg to also print dictionary contents based on
    a user command line option.

    Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
    Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-29 13:19:03 +08:00
Dave Young
65e3922d80 ppc/ppc64: compile purgatory with gcc option msoft-float
Resolves: bz831015

add below patch from vivek for upstream.
commit d40badaa2553c44d0585df335ad7e1c465f8ced1
Author: Vivek Goyal <vgoyal@redhat.com>
Date:   Fri Jun 8 09:43:15 2012 -0400

    ppc/ppc64: Compile purgatory code with gcc option -msoft-float

Verified-by: Lingzhu Xiang <lxiang@redhat.com>
Acked-by: Cong Wang <amwang@redhat.com>
2012-09-29 13:15:36 +08:00
Dave Young
9171cb3020 Release 2.0.3-55 2012-09-06 15:49:58 +08:00
Dave Young
1fbb5a69b4 pull makedumpfile 1.5.0 2012-09-06 15:39:58 +08:00
Dave Young
1053f9b7d2 Release 2.0.3-54 2012-08-29 09:44:56 +08:00
Dave Young
13eefe9f48 Release 2.0.3-53
changelog contains changes since 2.0.3-51
2012-07-23 15:36:56 +08:00
Dennis Gilmore
423e0019c4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild 2012-07-19 12:59:40 -05:00
Dave Young
8ec4877f7b remove busybox dependency
We do not depend on busybox anymore, so remove it from Requires field.

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
b14b692242 omit dash module
dash is be default omited in f17, but we use -o in command line so our omit
modules list will overwrite the system configs, so dash will be installed to
initramfs.

Here avoid install dash by adding it to the '-o' list
Also remove dash dependency from rpm spec

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-12 11:15:35 +08:00
Dave Young
2e730e047e Release 2.0.3-51 2012-07-05 16:57:03 +08:00
dyoung@redhat.com
e8693e46f6 Add s390x support
Enable s390x, add same sysconfig as rhel6

Resolve: bug 813154

Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
2012-07-05 16:48:46 +08:00
Dave Young
b5f7f39ee6 Release 2.0.3-50 2012-06-22 15:53:04 +08:00
Dave Young
16e24a1197 Release 2.0.3-49
bump version to 2.0.3-49
2012-06-12 13:30:58 +08:00
Dave Young
7eb9e92430 Release 2.0.3-48
Resolves: bz805773, bz707441, bz822701, bz822739, bz808817
2012-05-28 09:57:49 +08:00
Dave Young
a0bc139793 remove suffix of rhcrashkernel-param.sh
Per vivek, remove the .sh suffix
2012-05-18 10:02:07 +08:00
Dave Young
ca94c80a91 add rhcrashkernel-param.sh for anaconda use
Resolves: 707441

Provide a script rhcrashkernel-param.sh to generate cmdline, so anaconda can just
call it, we can easily add more logic into this script later.

Note: Currently for fedora only adding null output for testing purpose.

Signed-off-by: Dave Young <dyoung@redhat.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
2012-05-16 11:22:42 +08:00
Dave Young
334ded7e8b Release 2.0.3-47 2012-05-03 10:12:32 +08:00
Dave Young
bbd2e7d30a remove dracut-files.tbz2 [v2]
Resolves: bz816864

currently kexec-tools maintains kdump dracut modules as below dir hierarchy:
 [dave@localhost fedpkg]$ tree kexec-tools/kdump_dracut_modules
 kexec-tools/kdump_dracut_modules
 `-- 99kdumpbase
     |-- kdump.sh
     `-- module-setup.sh

But in kexec-tools.spec, sources line is below:
Source100: dracut-files.tbz2

So we need to manually generate the dracut-files.tbz2, upload it, modify
the sources file which contains the md5sum of these binaies, and then do
the building. The more headache problem is this make local tests of
changes to kdump module hard.

To ease future work, move the files to TOPDIR, cp the sources instead.

Thanks for help from dzickus
[v1->v2]: Also remove dracut-files.tbz2 from sources file
          ChaoWang: add prefix to dracut files
2012-05-03 10:06:05 +08:00
Dave Young
33eb910322 increase version to 2.0.3-46 2012-05-02 10:25:57 +08:00
Dave Young
82595d8f2b Release 2.0.3-45
update the dracut-files.tgz2
2012-04-23 15:59:37 +08:00
Dave Young
29a5d0629b Release 2.0.3-44 2012-04-19 13:56:15 +08:00
Cong Wang
2347ccef79 fix version number in changelog 2012-04-11 19:36:29 +08:00
Cong Wang
7f1816b6c1 Release 2.0.2-43 2012-04-11 19:32:20 +08:00
Cong Wang
832c25f2d6 Release 2.0.3-42 2012-03-30 11:42:14 +08:00
Dave Young
f7b9767f87 spec: depends on dracut-network
Resolves: bz807286

kexec-tools should depend on dracut-network

Signed-off-by: Dave Young <dyoung@redhat.com>
2012-03-30 11:32:51 +08:00
Cong Wang
726d9319cb Bump this version 2012-02-27 15:33:35 +08:00
Cong Wang
6fdfc66acc Fixup sysytemd service file 2012-02-22 14:33:53 +08:00
Dave Young
ba0aa24316 Add ssh dump support
Add ssh dump support

changes including below items:
1. sshkey option
2. sshkey propagate
3. fix a bug of  _server ip calculation for dump target string
4. change the prefix of kdump hook from 93 to 01 to avoid dhclient and
   other cleanups happening before us
5. enable network with dracut cmdline rd.neednet=1 when there's network
   target config

[v1 - v2]:
Only check_ssh_target when there's ssh dump target in kdump config file

[v2 -> v3]
style fixes: trailing spaces and space before tab indent
remove set -x
simply check_ssh_target
use awk to get sshkey option value
change pivot hook order to 0000

Signed-off-by: Dave Young <dyoung@redhat.com>
2012-02-22 14:12:57 +08:00
Cong Wang
6ffa63d416 Pull the latest makedumpfile release, 1.4.2 2012-01-27 23:10:18 +08:00
Cong Wang
481cb83cfd Add initial NFS dump support, experimental 2012-01-27 22:59:43 +08:00
Cong Wang
f51fd99344 Really upload the dracut module this time 2012-01-25 17:21:43 +08:00
Cong Wang
c461ec7057 Fix various bugs for nfs dump 2012-01-25 16:58:35 +08:00
Cong Wang
8a14c620b7 kdump.sh cleanup for fstab handling 2012-01-25 15:25:39 +08:00
Cong Wang
2630148dc7 Handle rootfs correctly 2012-01-25 12:18:51 +08:00
Cong Wang
8e0b475887 Disable kexec_test 2012-01-21 16:56:07 +08:00
Cong Wang
c0742d742a Fix build dependency 2012-01-21 16:41:53 +08:00
Cong Wang
055c5b7189 Fix build dependency 2012-01-21 14:56:40 +08:00