rpms/kexec-tools
7
0
Fork 0
Code Issues Pull Requests Releases Activity
bbd2e7d30a
kexec-tools/kexec-tools.spec
Dave Young bbd2e7d30a remove dracut-files.tbz2 [v2] 
Resolves: bz816864

currently kexec-tools maintains kdump dracut modules as below dir hierarchy:
 [dave@localhost fedpkg]$ tree kexec-tools/kdump_dracut_modules
 kexec-tools/kdump_dracut_modules
 `-- 99kdumpbase
     |-- kdump.sh
     `-- module-setup.sh

But in kexec-tools.spec, sources line is below:
Source100: dracut-files.tbz2

So we need to manually generate the dracut-files.tbz2, upload it, modify
the sources file which contains the md5sum of these binaies, and then do
the building. The more headache problem is this make local tests of
changes to kdump module hard.

To ease future work, move the files to TOPDIR, cp the sources instead.

Thanks for help from dzickus
[v1->v2]: Also remove dracut-files.tbz2 from sources file
          ChaoWang: add prefix to dracut files
2012-05-03 10:06:05 +08:00

919 lines
32 KiB
RPMSpec
Raw Blame History

Name: kexec-tools
Version: 2.0.3
Release: 46%{?dist}
License: GPLv2
Group: Applications/System
Summary: The kexec/kdump userspace component.
Source0: http://kernel.org/pub/linux/utils/kernel/kexec/%{name}-%{version}.tar.bz2
Source1: kdumpctl
Source2: kdump.sysconfig
Source3: kdump.sysconfig.x86_64
Source4: kdump.sysconfig.i386
Source5: kdump.sysconfig.ppc64
Source6: kdump.sysconfig.ia64
Source7: mkdumprd
Source8: kdump.conf
Source9: http://downloads.sourceforge.net/project/makedumpfile/makedumpfile/1.4.2/makedumpfile-1.4.2.tar.gz
Source10: kexec-kdump-howto.txt
Source11: firstboot_kdump.py
Source12: mkdumprd.8
Source13: kexec-tools-po.tar.gz
Source14: 98-kexec.rules
Source15: kdump.conf.5
Source16: kdump.service
#######################################
# These are sources for mkdumpramfs
# Which is currently in development
#######################################
Source100: dracut-kdump.sh
Source101: dracut-module-setup.sh
Source102: dracut-monitor_dd_progress
Requires(post): systemd-units
Requires(preun): systemd-units
Requires(postun): systemd-units
Requires(pre): coreutils sed zlib
Requires: busybox >= 1.2.0, dracut, dracut-network
BuildRequires: dash
BuildRequires: zlib-devel zlib zlib-static elfutils-devel-static glib2-devel bzip2-devel
BuildRequires: pkgconfig intltool gettext
BuildRequires: systemd-units
%ifarch %{ix86} x86_64 ppc64 ia64 ppc
Obsoletes: diskdumputils netdump
%endif
#START INSERT
#
# Patches 0 through 100 are meant for x86 kexec-tools enablement
#
#
# Patches 101 through 200 are meant for x86_64 kexec-tools enablement
#
#
# Patches 201 through 300 are meant for ia64 kexec-tools enablement
#
#
# Patches 301 through 400 are meant for ppc64 kexec-tools enablement
#
#
# Patches 401 through 500 are meant for s390 kexec-tools enablement
#
#
# Patches 501 through 600 are meant for ppc kexec-tools enablement
#
#
# Patches 601 onward are generic patches
#
Patch601: kexec-tools-2.0.3-disable-kexec-test.patch
%description
kexec-tools provides /sbin/kexec binary that facilitates a new
kernel to boot using the kernel's kexec feature either on a
normal or a panic reboot. This package contains the /sbin/kexec
binary and ancillary utilities that together form the userspace
component of the kernel's kexec feature.
%prep
%setup -q
mkdir -p -m755 kcp
tar -z -x -v -f %{SOURCE9}
%patch601 -p1
tar -z -x -v -f %{SOURCE13}
%ifarch ppc
%define archdef ARCH=ppc
%endif
%build
%ifarch ia64
# ia64 gcc seems to have a problem adding -fexception -fstack-protect and
# -param ssp-protect-size, like the %configure macro does
# while that shouldn't be a problem, and it still builds fine, it results in
# the kdump kernel hanging on kexec boot. I don't yet know why, but since those
# options aren't critical, I'm just overrideing them here for ia64
export CFLAGS="-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2"
%endif
%configure \
%ifarch ppc64
--host=powerpc64-redhat-linux-gnu \
--build=powerpc64-redhat-linux-gnu \
%endif
--sbindir=/sbin
rm -f kexec-tools.spec.in
# setup the docs
cp %{SOURCE10} .
make
%ifarch %{ix86} x86_64 ia64 ppc64
make -C makedumpfile-1.4.2 LINKTYPE=dynamic
%endif
make -C kexec-tools-po
%install
make install DESTDIR=$RPM_BUILD_ROOT
mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig
mkdir -p -m755 $RPM_BUILD_ROOT%{_localstatedir}/crash
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man8/
mkdir -p -m755 $RPM_BUILD_ROOT%{_mandir}/man5/
mkdir -p -m755 $RPM_BUILD_ROOT%{_docdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_datadir}/kdump
mkdir -p -m755 $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d
mkdir -p $RPM_BUILD_ROOT%{_unitdir}
mkdir -p -m755 $RPM_BUILD_ROOT%{_bindir}
install -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_bindir}/kdumpctl
SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_target_cpu}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig.%{_arch}
[ -f $SYSCONFIG ] || SYSCONFIG=$RPM_SOURCE_DIR/kdump.sysconfig
install -m 644 $SYSCONFIG $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/kdump
install -m 755 %{SOURCE7} $RPM_BUILD_ROOT/sbin/mkdumprd
install -m 644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/kdump.conf
install -m 644 kexec/kexec.8 $RPM_BUILD_ROOT%{_mandir}/man8/kexec.8
install -m 755 %{SOURCE11} $RPM_BUILD_ROOT%{_datadir}/kdump/firstboot_kdump.py
install -m 644 %{SOURCE12} $RPM_BUILD_ROOT%{_mandir}/man8/mkdumprd.8
install -m 644 %{SOURCE14} $RPM_BUILD_ROOT%{_sysconfdir}/udev/rules.d/98-kexec.rules
install -m 644 %{SOURCE15} $RPM_BUILD_ROOT%{_mandir}/man5/kdump.conf.5
install -m 644 %{SOURCE16} $RPM_BUILD_ROOT%{_unitdir}/kdump.service
%ifarch %{ix86} x86_64 ia64 ppc64
install -m 755 makedumpfile-1.4.2/makedumpfile $RPM_BUILD_ROOT/sbin/makedumpfile
install -m 644 makedumpfile-1.4.2/makedumpfile.8.gz $RPM_BUILD_ROOT/%{_mandir}/man8/makedumpfile.8.gz
%endif
make -C kexec-tools-po install DESTDIR=$RPM_BUILD_ROOT
%find_lang %{name}
%define remove_dracut_prefix() %(echo -n %1|sed 's/.*dracut-//g')
# deal with dracut modules
mkdir -p -m755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase
cp %{SOURCE100} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
cp %{SOURCE101} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
cp %{SOURCE102} $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE102}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE100}}
chmod 755 $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/99kdumpbase/%{remove_dracut_prefix %{SOURCE101}}
%define dracutlibdir %{_prefix}/lib/dracut
#and move the custom dracut modules to the dracut directory
mkdir -p $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/
mv $RPM_BUILD_ROOT/etc/kdump-adv-conf/kdump_dracut_modules/* $RPM_BUILD_ROOT/%{dracutlibdir}/modules.d/
%post
if [ $1 -eq 1 ] ; then
# Initial installation
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
fi
touch /etc/kdump.conf
# This portion of the script is temporary. Its only here
# to fix up broken boxes that require special settings
# in /etc/sysconfig/kdump. It will be removed when
# These systems are fixed.
if [ -d /proc/bus/mckinley ]
then
# This is for HP zx1 machines
# They require machvec=dig on the kernel command line
sed -e's/\(^KDUMP_COMMANDLINE_APPEND.*\)\("$\)/\1 machvec=dig"/' \
/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
elif [ -d /proc/sgi_sn ]
then
# This is for SGI SN boxes
# They require the --noio option to kexec
# since they don't support legacy io
sed -e's/\(^KEXEC_ARGS.*\)\("$\)/\1 --noio"/' \
/etc/sysconfig/kdump > /etc/sysconfig/kdump.new
mv /etc/sysconfig/kdump.new /etc/sysconfig/kdump
fi
%postun
/bin/systemctl daemon-reload >/dev/null 2>&1 || :
if [ $1 -ge 1 ] ; then
# Package upgrade, not uninstall
/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :
fi
%preun
if [ $1 -eq 0 ] ; then
# Package removal, not upgrade
/bin/systemctl --no-reload disable kdump.service > /dev/null 2>&1 || :
/bin/systemctl stop kdump.service > /dev/null 2>&1 || :
fi
%triggerun -- kexec-tools < 2.0.2-3
# Save the current service runlevel info
# User must manually run systemd-sysv-convert --apply kdump
# to migrate them to systemd targets
/usr/bin/systemd-sysv-convert --save kdump >/dev/null 2>&1 ||:
# Run these because the SysV package being removed won't do them
/sbin/chkconfig --del kdump >/dev/null 2>&1 || :
/bin/systemctl try-restart kdump.service >/dev/null 2>&1 || :
%triggerin -- firstboot
# we enable kdump everywhere except for paravirtualized xen domains; check here
if [ -f /proc/xen/capabilities ]; then
if [ -z `grep control_d /proc/xen/capabilities` ]; then
exit 0
fi
fi
if [ ! -e %{_datadir}/firstboot/modules/firstboot_kdump.py ]
then
ln -s %{_datadir}/kdump/firstboot_kdump.py %{_datadir}/firstboot/modules/firstboot_kdump.py
fi
%triggerin -- kernel-kdump
touch %{_sysconfdir}/kdump.conf
%triggerun -- firstboot
rm -f %{_datadir}/firstboot/modules/firstboot_kdump.py
%triggerpostun -- kernel kernel-xen kernel-debug kernel-PAE kernel-kdump
# List out the initrds here, strip out version nubmers
# and search for corresponding kernel installs, if a kernel
# is not found, remove the corresponding kdump initrd
#start by getting a list of all the kdump initrds
MY_ARCH=`uname -m`
if [ "$MY_ARCH" == "ia64" ]
then
IMGDIR=/boot/efi/efi/redhat
else
IMGDIR=/boot
fi
for i in `ls $IMGDIR/initrd*kdump.img 2>/dev/null`
do
KDVER=`echo $i | sed -e's/^.*initrd-//' -e's/kdump.*$//'`
if [ ! -e $IMGDIR/vmlinuz-$KDVER ]
then
# We have found an initrd with no corresponding kernel
# so we should be able to remove it
rm -f $i
fi
done
%files -f %{name}.lang
/sbin/*
%{_bindir}/*
%{_datadir}/kdump
%config(noreplace,missingok) %{_sysconfdir}/sysconfig/kdump
%config(noreplace,missingok) %{_sysconfdir}/kdump.conf
%config %{_sysconfdir}/udev/rules.d/*
%{dracutlibdir}/modules.d/*
%dir %{_localstatedir}/crash
%{_mandir}/man8/*
%{_mandir}/man5/*
%{_unitdir}/kdump.service
%doc News
%doc COPYING
%doc TODO
%doc kexec-kdump-howto.txt
%changelog
* Wed May 2 2012 Dave Young <ruyang@redhat.com> - 2.0.3-46
- mkdumprd: Start using --hostonly and --add kdumpbase while calling dracut
- get_mp function cleanup
- move kdump script order to the end of pre pivot
- port raw dump from rhel6
- remove multi dump
* Mon Apr 23 2012 Dave Young <ruyang@redhat.com> - 2.0.3-45
- update dracut-files.tbz2
* Thu Apr 19 2012 Dave Young <dyoung@redhat.com> - 2.0.3-44
- update ppc64 sysconfig, resolve bug 811449
- deal with nic rename issue, resolve bug 810107
- update x86_64 sysconfig, resolve bug 813711
* Wed Apr 11 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-43
- variable name fix from Dave Young.
* Fri Mar 30 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-42
- get ip addr with getent
- spec: depends on dracut-network
- Handle net option for nfs in kdump.conf correctly
* Mon Feb 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.3-41
- Bump this version.
* Wed Feb 22 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-40
- Fixup sysytemd service file.
* Wed Feb 22 2012 Dave Young <ruyang@redhat.com> - 2.0.2-39
- Add ssh dump support, resolve bug 789253.
* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-38
- Pull the latest makedumpfile release, 1.4.2.
* Fri Jan 27 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-37
- Add initial NFS dump support, experimental.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-36
- Really upload the dracut module.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-35
- Fix various bugs for nfs dump.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-34
- kdump.sh cleanup for fstab handling, from Dave Young.
* Wed Jan 25 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-33
- Handle rootfs correctly.
* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-32
- Fix add_dracut_arg in mkdumprd.
* Tue Jan 10 2012 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-31
- Update kdump dracut module with the latest dracut kdump branch.
* Fri Dec 16 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-30
- Update kdump dracut module to use the latest dracut feature.
* Fri Sep 9 2011 Tom Callaway <spot@fedoraproject.org> - 2.0.2-29
- fix systemd scriptlets
* Wed Sep 7 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-28
- Rename mkdumprd2 to mkdumpramfs.
* Wed Aug 31 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-27
- Add debug_mem_level debugging option, from Jan Stancek.
Resolve Bug 731395.
* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-26
- Fix several issues caused by the previous revert.
* Mon Aug 15 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-25
- Switch back to old mkdumprd and also keep the new one.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-24
- Fix default action handling.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-23
- Install modified kdump.conf in initrd.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-22
- Handle lvm in pre-pivot hook.
* Tue Aug 2 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-21
- Fix udev rules in module-setup.sh
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-20
- Generate udev rules in module-setup.sh
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-19
- Generate udev rules to handle device names.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-18
- Fix dump to local filesystem and raw dump.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-17
- Depend on dracut-network.
* Mon Aug 1 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-16
- Move dracut module detection code to module-setup.sh.
* Wed Jul 28 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-15
- Use shutdown module of dracut to handle reboot/shutdown/halt.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-14
- Wait for loginit.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-13
- Use absolute path of reboot/halt/poweroff.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-12
- Don't use consolehelper, use real reboot/halt/poweroff.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-11
- Rename initrd to initramfs.
* Wed Jul 27 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-10
- Don't depend on busybox, as it doesn't save much space.
* Tue Jul 26 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-9
- Parse default action.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-8
- Move path/core_collector/default parsing code to initrd.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-7
- Remove obsolete code in kdumpctl.
* Mon Jul 25 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-6
- Support core_collector and extran_bins.
* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-5
- Bypass '-d' option.
* Thu Jul 21 2011 Cong Wang <xiyou.wangcong@gmail.com> - 2.0.2-4
- Update initramfs infrastructure to make it working
with dracut.
* Wed Jul 06 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-3
- Removed sysv init script from package
* Mon Jul 04 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-2
- Added systemd unit file (bz 716994)
* Fri Jun 24 2011 Neil Horman <nhorman@redhat.com> - 2.0.2-1
- Updated to upstream version 2.0.2
* Mon Jun 02 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-47
- Fixed misuse of readlink command after directory change (bz 710744)
* Tue Apr 26 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-46
- Fix some grammer in man page (bz 673817)
* Mon Mar 28 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-45
- Fix misuse of basename in mkdumprd (bz 683769)
* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-44
- Fix build break in purgatory makefile
* Thu Mar 10 2011 Neil Horman <nhorman@redhat.com> - 2.0.0-43
- Remove vestigual emitdms code and call from mkdumprd
* Mon Feb 07 2011 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-42
- Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild
* Fri Oct 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-41
- Fixed dhcp retry mechanism (bz 645734)
* Wed Sep 29 2010 jkeating - 2.0.0-40
- Rebuilt for gcc bug 634757
* Wed Sep 22 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-39
- fix finding modalias/mkdumprd hang (bz 635893)
* Wed Aug 11 2010 David Malcolm <dmalcolm@redhat.com> - 2.0.0-38
- recompiling .py files against Python 2.7 (rhbz#623327)
* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-37
- Fix a syntax error in kdump init script
* Sun Jun 13 2010 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-36
- Cosmetic mkdumprd fixes (drop an unused function, streamline another)
* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-35
- Forward-port from F13
- Fixed kernel text area search in kcore (bz 587750)
* Sat May 29 2010 CAI Qian <caiqian@redhat.com> - 2.0.0-34
- Massive forward-port from RHEL6
- Update kexec-kdump-howto.txt
- Update docs to reflect use of ext4
- Update mkdumprd to pull in all modules needed
- Fix mkdumprd typo
- Removed universal add of ata_piix from mkdumprd
- Fix infinite loop from modprobe changes
- Fixed kexec-kdump-howto.doc for RHEL6
- Update makedumpfile to 1.3.5
- Improved mkdumprd run time
- Cai's fix for broken regex
- Fixing crashkernel syntax parsing
- Fix initscript to return proper LSB return codes
- Fixed bad call to resolve_dm_name
- Added poweroff option to mkdumprd
- Fixed readlink issue
- Fixed x86_64 page_offset specifictaion
- Fixed lvm setup loop to not hang
- Added utsname support to makedumpfile for 2.6.32
- Fix critical_disks list to exclude cciss/md
- Add help info for -b option
- Add ability to handle firmware hotplug events
- Update mkdumprd to deal with changes in busybox fsck
- Vitaly's fix to detect need for 64 bit elf
- Fix major/minor numbers on /dev/rtc
- Fix ssh id propogation w/ selinux
- Add blacklist feature to kdump.conf
- Removed rhpl code from firstboot
- Fixed firstboot enable sense
- Remove bogus debug comment from mkdumprd.
- Handle SPARSEMEM properly
- Fix scp monitoring script
- Fix firstboot to find grub on EFI systems
- Fixed mkdumprd to remove dup insmod
- Fixed kdump fsck pause
- Fixed kdump option handling
- fixed raid5 module detection
* Thu Mar 11 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-33
- Remove nash references from mkdumprd
* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-32
- Fixed spec file error
* Wed Feb 17 2010 Neil Horman <nhorman@redhat.com> - 2.0.0-31
- Adding kdump.conf man page
- Adding disk timeout parameter (bz 566135)
* Tue Dec 01 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-30
- Fix raid support in mkdumprd (bz 519767)
* Mon Nov 23 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-29
- Updating firstboot script to RHEL-6 version (bz 539812)
* Fri Nov 06 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-28
- Added abrt infrastructure to kdump init script (bz 533370)
* Tue Sep 15 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-27
- Fixing permissions on dracut module files
* Fri Sep 11 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-26
- Rebuild for translation team (bz 522415)
* Thu Sep 10 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-25
- Fix dracut module check file (bz 522486)
* Thu Aug 13 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-24
- update kdump adv conf init script & dracut module
* Wed Jul 29 2009 Neil Horman <nhorman@redhat.com> - 2.0,0-23
- Remove mkdumprd2 and start replacement with dracut
* Fri Jul 24 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-22
- Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-21
- Fixed build break
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-20
- Make makedumpfile a dynamic binary
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-19
- Fix build issue
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-18
- Updated initscript to use mkdumprd2 if manifest is present
- Updated spec to require dash
- Updated sample manifest to point to correct initscript
- Updated populate_std_files helper to fix sh symlink
* Mon Jul 06 2009 Neil Horman <nhorman@redhat.com> 2.0.0-17
- Fixed mkdumprd2 tarball creation
* Wed Jun 23 2009 Neil Horman <nhorman@redhat.com> 2.0.0-16
- Fix up kdump so it works with latest firstboot
* Mon Jun 15 2009 Neil Horman <nhorman@redhat.com> 2.0.0-15
- Fixed some stat drive detect bugs by E. Biederman (bz505701)
* Wed May 20 2009 Neil Horman <nhorman@redhat.com> 2.0.0-14
- Put early copy of mkdumprd2 out in the wild (bz 466392)
* Fri May 08 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-13
- Update makedumpfile to v 1.3.3 (bz 499849)
* Tue Apr 07 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-12
- Simplifed rootfs mounting code in mkdumprd (bz 494416)
* Sun Apr 05 2009 Lubomir Rintel <lkundrak@v3.sk> - 2.0.0-11
- Install the correct configuration for i586
* Fri Apr 03 2009 Neil Horman <nhorman@redhat.com> - 2.0.0-10
- Fix problem with quoted CORE_COLLECTOR string (bz 493707)
* Thu Apr 02 2009 Orion Poplawski <orion@cora.nwra.com> - 2.0.0-9
- Add BR glibc-static
* Wed Feb 25 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 2.0.0-8
- Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild
* Thu Dec 04 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-7
- Rebuild for Python 2.6
* Mon Dec 01 2008 Neil Horman <nhorman@redhat.com> - 2.0.0.6
- adding makedumpfile man page updates (bz 473212)
* Mon Dec 01 2008 Ignacio Vazquez-Abrams <ivazqueznet+rpm@gmail.com> - 2.0.0-5
- Rebuild for Python 2.6
* Wed Nov 05 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-3
- Correct source file to use proper lang package (bz 335191)
* Wed Oct 29 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix mkdumprd typo (bz 469001)
* Mon Sep 15 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-2
- Fix sysconfig files to not specify --args-linux on x86 (bz 461615)
* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 2.0.0-1
- Update kexec-tools to latest upstream version
* Wed Aug 27 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-16
- Fix mkdumprd to properly use UUID/LABEL search (bz 455998)
* Tue Aug 5 2008 Tom "spot" Callaway <tcallawa@redhat.com> - 1.102pre-15
- fix license tag
* Mon Jul 28 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-14
- Add video reset section to docs (bz 456572)
* Mon Jul 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-13
- Fix mkdumprd to support dynamic busybox (bz 443878)
* Wed Jun 11 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-12
- Added lvm to bin list (bz 443878)
* Thu Jun 05 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-11
- Update to latest makedumpfile from upstream
- Mass import of RHEL fixes missing in rawhide
* Thu Apr 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-10
- Fix mkdumprd to properly pull in libs for lvm/mdadm (bz 443878)
* Wed Apr 16 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-9
- Fix cmdline length issue
* Tue Mar 25 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-8
- Fixing ARCH definition for bz 438661
* Mon Mar 24 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-7
- Adding patches for bz 438661
* Fri Feb 22 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-6
- Bringing rawhide up to date with bugfixes from RHEL5
- Adding patch to prevent kexec buffer overflow on ppc (bz 428684)
* Tue Feb 19 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-5
- Modifying mkdumprd to include dynamic executibles (bz 433350)
* Wed Feb 12 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-4
- bumping rev number for rebuild
* Wed Jan 02 2008 Neil Horman <nhorman@redhat.com> - 1.102pre-3
- Fix ARCH placement in kdump init script (bz 427201)
- Fix BuildRequires
- Fix Makedumpfile to build with new libelf
* Mon Oct 01 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-2
- Fix triggerpostun script (bz 308151)
* Mon Aug 30 2007 Neil Horman <nhorman@redhat.com> - 1.102pre-1
- Bumping kexec version to latest horms tree (bz 257201)
- Adding trigger to remove initrds when a kernel is removed
* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-81
- Add xen-syms patch to makedumpfile (bz 250341)
* Wed Aug 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-80
- Fix ability to determine space on nfs shares (bz 252170)
* Tue Aug 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-79
- Update kdump.init to always create sparse files (bz 253714)
* Fri Aug 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-78
- Update init script to handle xen kernel cmdlnes (bz 250803)
* Wed Aug 01 2007 Neil Horman <nhorman@redhat.com> - 1.101-77%{dist}
- Update mkdumprd to suppres notifications /rev makedumpfile (bz 250341)
* Thu Jul 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-76%{dist}
- Fix mkdumprd to suppress informative messages (bz 248797)
* Wed Jul 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-75%{dist}
- Updated fr.po translations (bz 248287)
* Mon Jul 17 2007 Neil Horman <nhorman@redhat.com> - 1.101-74%{dist}
- Fix up add_buff to retry locate_hole on segment overlap (bz 247989)
* Mon Jul 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-73%{dist}
- Fix up language files for kexec (bz 246508)
* Thu Jul 05 2007 Neil Horman <nhorman@redhat.com> - 1.101-72%{dist}
- Fixing up initscript for LSB (bz 246967)
* Tue Jun 19 2007 Neil Horman <nhorman@redhat.com> - 1.101-71%{dist}
- Fixed conflict in mkdumprd in use of /mnt (bz 222911)
* Mon Jun 18 2007 Neil Horman <nhorman@redhat.com> - 1.101-70%{dist}
- Fixed kdump.init to properly read cmdline (bz 244649)
* Wed Apr 11 2007 Neil Horman <nhorman@redhat.com> - 1.101-69%{dist}
- Fixed up kdump.init to enforce mode 600 on authorized_keys2 (bz 235986)
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-68%{dist}
- Fix alignment of bootargs and device-tree structures on ppc64
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-67%{dist}
- Allow ppc to boot ppc64 kernels (bz 235608)
* Tue Apr 10 2007 Neil Horman <nhorman@redhat.com> - 1.101-66%{dist}
- Reduce rmo_top to 0x7c000000 for PS3 (bz 235030)
* Mon Mar 26 2007 Neil Horman <nhorman@redhat.com> - 1.101-65%{dist}
- Fix spec to own kexec_tools directory (bz 219035)
* Wed Mar 21 2007 Neil Horman <nhorman@redhat.com> - 1.101-64%{dist}
- Add fix for ppc memory region computation (bz 233312)
* Thu Mar 15 2007 Neil Horman <nhorman@redhat.com> - 1.101-63%{dist}
- Adding extra check to avoid oom kills on nfs mount failure (bz 215056)
* Tue Mar 06 2007 Neil Horman <nhorman@redhat.com> - 1.101-62%{dist}
- Updating makedumpfile to version 1.1.1 (bz 2223743)
* Mon Feb 22 2007 Neil Horman <nhorman@redhat.com> - 1.101-61%{dist}
- Adding multilanguage infrastructure to firstboot_kdump (bz 223175)
* Mon Feb 12 2007 Neil Horman <nhorman@redhat.com> - 1.101-60%{dist}
- Fixing up file permissions on kdump.conf (bz 228137)
* Fri Feb 09 2007 Neil Horman <nhorman@redhat.com> - 1.101-59%{dist}
- Adding mkdumprd man page to build
* Wed Jan 25 2007 Neil Horman <nhorman@redhat.com> - 1.101-58%{dist}
- Updating kdump.init and mkdumprd with most recent RHEL5 fixes
- Fixing BuildReq to require elfutils-devel-static
* Thu Jan 04 2007 Neil Horman <nhorman@redhat.com> - 1.101-56%{dist}
- Fix option parsing problem for bzImage files (bz 221272)
* Fri Dec 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-55%{dist}
- Wholesale update of RHEL5 revisions 55-147
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-54%{dist}
- integrate default elf format patch
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-53%{dist}
- Taking Viveks x86_64 crashdump patch (rcv. via email)
* Tue Aug 29 2006 Neil Horman <nhorman@redhat.com> - 1.101-52%{dist}
- Taking ia64 tools patch for bz 181358
* Mon Aug 28 2006 Neil Horman <nhorman@redhat.com> - 1.101-51%{dist}
- more doc updates
- added patch to fix build break from kernel headers change
* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-50%{dist}
- repo patch to enable support for relocatable kernels.
* Thu Aug 24 2006 Neil Horman <nhorman@redhat.com> - 1.101-49%{dist}
- rewriting kcp to properly do ssh and scp
- updating mkdumprd to use new kcp syntax
* Wed Aug 23 2006 Neil Horman <nhorman@redhat.com> - 1.101-48%{dist}
- Bumping revision number
* Tue Aug 22 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-47%{dist}
- ppc64 no-more-platform fix
* Mon Aug 21 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-46%{dist}
- ppc64 fixups:
- actually build ppc64 binaries (bug 203407)
- correct usage output
- avoid segfault in command-line parsing
- install kexec man page
- use regulation Fedora BuildRoot
* Fri Aug 18 2006 Neil Horman <nhorman@redhat.com> - 1.101-45%{dist}
- fixed typo in mkdumprd for bz 202983
- fixed typo in mkdumprd for bz 203053
- clarified docs in kdump.conf with examples per bz 203015
* Tue Aug 15 2006 Neil Horman <nhorman@redhat.com> - 1.101-44%{dist}
- updated init script to implement status function/scrub err messages
* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-43%{dist}
- Misc spec cleanups and macro-ifications
* Wed Aug 09 2006 Jarod Wilson <jwilson@redhat.com> - 1.101-42%{dist}
- Add %dir /var/crash, so default kdump setup works
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-41%{dist}.1
- fix another silly makefile error for makedumpfile
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-40%{dist}.1
- exclude makedumpfile from build on non-x86[_64] arches
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-39%{dist}.1
- exclude makedumpfile from build on non-x86[_64] arches
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-38%{dist}.1
- updating makedumpfile makefile to use pkg-config on glib-2.0
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-37%{dist}.1
- updating makedumpfile makefile to use pkg-config
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-36%{dist}.1
- Removing unneeded deps after Makefile fixup for makedumpfile
* Thu Aug 03 2006 Neil Horman <nhorman@redhat.com> - 1.101-35%{dist}.1
- fixing up FC6/RHEL5 BuildRequires line to build in brew
* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-34%{dist}.1
- enabling makedumpfile in build
* Wed Aug 02 2006 Neil Horman <nhorman@redhat.com> - 1.101-33%{dist}.1
- added makedumpfile source to package
* Mon Jul 31 2006 Neil Horman <nhorman@redhat.com> - 1.101-32%{dist}.1
- added et-dyn patch to allow loading of relocatable kernels
* Thu Jul 27 2006 Neil Horman <nhorman@redhat.com> - 1.101-30%{dist}.1
- fixing up missing patch to kdump.init
* Wed Jul 19 2006 Neil Horman <nhorman@redhat.com> - 1.101-30%{dist}.1
- add kexec frontend (bz 197695)
* Wed Jul 12 2006 Jesse Keating <jkeating@redhat.com> - 1.101-29%{dist}.1
- rebuild
* Wed Jul 07 2006 Neil Horman <nhorman@redhat.com> 1.101-27.fc6
- Buildrequire zlib-devel
* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-19
- Bumping rev number
* Thu Jun 22 2006 Neil Horman <nhorman@redhat.com> -1.101-17
- Add patch to allow ppc64 to ignore args-linux option
* Wed Mar 08 2006 Bill Nottingham <notting@redhat.com> - 1.101-16
- fix scriptlet - call chkconfig --add, change the default in the
script itself (#183633)
* Wed Mar 08 2006 Thomas Graf <tgraf@redhat.com> - 1.101-15
- Don't add kdump service by default, let the user manually add it to
avoid everyone seeing a warning.
* Tue Mar 07 2006 Thomas Graf <tgraf@redhat.com> - 1.101-14
- Fix kdump.init to call kexec from its new location
* Mon Mar 6 2006 Jeremy Katz <katzj@redhat.com> - 1.101-13
- proper requires for scriptlets
* Mon Mar 06 2006 Thomas Graf <tgraf@redhat.com> - 1.101-12
- Move kexec and kdump binaries to /sbin
* Thu Mar 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-11
- Fix argument order when stopping kexec
* Mon Feb 27 2006 Thomas Graf <tgraf@redhat.com> - 1.101-10
- kdump7.patch
o Remove elf32 core headers support for x86_64
o Fix x86 prepare elf core header routine
o Fix ppc64 kexec -p failure for gcc 4.10
o Fix few warnings for gcc 4.10
o Add the missing --initrd option for ppc64
o Fix ppc64 persistent root device bug
- Remove --elf32-core-headers from default configuration, users
may re-add it via KEXEC_ARGS.
- Remove obsolete KEXEC_HEADERS
* Wed Feb 22 2006 Thomas Graf <tgraf@redhat.com> - 1.101-9
- Remove wrong quotes around --command-line in kdump.init
* Fri Feb 17 2006 Jeff Moyer <jmoyer@redhat.com> - 1.101-8
- Fix the service stop case. It was previously unloading the wrong kernel.
- Implement the "restart" function.
- Add the "irqpoll" option as a default kdump kernel commandline parameter.
- Create a default kernel command line in the sysconfig file upon rpm install.
* Tue Feb 07 2006 Jesse Keating <jkeating@redhat.com> - 1.101-7.1.1
- rebuilt for new gcc4.1 snapshot and glibc changes
* Thu Feb 02 2006 Thomas Graf <tgraf@redhat.com> - 1.101-7.1
- Add patch to enable the kdump binary for x86_64
* Wed Feb 01 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support s390 arch + various fixes
- Include kdump in x86_64 builds
* Mon Jan 30 2006 Thomas Graf <tgraf@redhat.com>
- New kdump patch to support x86_64 userspace
* Fri Dec 16 2005 Jesse Keating <jkeating@redhat.com>
- rebuilt for new gcj
* Wed Nov 16 2005 Thomas Graf <tgraf@redhat.com> - 1.101-5
- Report missing kdump kernel image as warning
* Thu Nov 3 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-4
- Build for x86_64 as well. Kdump support doesn't work there, but users
should be able to use kexec.
* Fri Sep 23 2005 Jeff Moyer <jmoyer@redhat.com> - 1.101-3
- Add a kdump sysconfig file and init script
- Spec file additions for pre/post install/uninstall
* Thu Aug 25 2005 Jeff Moyer <jmoyer@redhat.com>
- Initial prototype for RH/FC5
Reference in New Issue View Git Blame Copy Permalink