For earlykdump, kdump-lib-initramfs.sh is sourced by kdump-lib.sh,
however it is not installed in dracut-early-kdump-module-setup.sh. Same
as xargs, which is used by kdump-lib.sh. Otherwise earlykdump will report
file not found errors.
Fixes: a5faa052d4
("kdump-lib-initramfs.sh: prepare to be a POSIX compatible lib")
Fixes: 4f01cb1b0a
("kdump-lib.sh: fix variable quoting issue")
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
Onlining secondary cpus breaks kdump completely on KVM on Power hosts
Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
possible cpus by default.
Thus before we get the kernel fix and the systemd rule fix let's remove
the cpu rule in 40-redhat.rules for ppc64/ppc64le kdump initramfs.
This is back ported from RHEL, and original credit goes to Dave Young
<dyoung@redhat.com>
Signed-off-by: Pingfan Liu <piliu@redhat.com>
Acked-by: Tao Liu <ltao@redhat.com>
When kexec-tools is newly installed, kdump migration action hasn't
registered and the following error could occur,
INF dnf.rpm: Could not find a registered notification tool with the specified command ('/usr/lib/kdump/kdump-migrate-action.sh').
"servicelog_notify --list" could list registered notification tools for
a command but it outputs the above error as well. So simply redirect the
error to /dev/null when running "servicelog_notify --remove".
Fixes: commit 146f662622
("kdump/ppc64: migration action registration clean up")
Acked-by: Tao Liu <ltao@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
When secureboot is enabled, kdumpctl needs to use keyctl to add/remove
a key to/from the .ima keyring.
Fixes: commit 596fa0a07f
("kdumpctl: enable secure boot on ppc64le LPARs")
Signed-off-by: Coiby Xu <coxu@redhat.com>
The Zstandard (zstd) compression method is not enabled:
$ makedumpfile -v
makedumpfile: version 1.7.0 (released on 8 Nov 2021)
lzo enabled
snappy enabled
zstd disabled
This patch will enable it when building kexec-tools rpm package.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
When there more than one binaries, quoting "$val" would make
dracut-install treat multiple binaries as one binary. Take
"extra_bins /usr/sbin/ping /usr/sbin/ip" as an example, the
following error would occur when building initrd,
dracut-install: ERROR: installing '/usr/sbin/ping /usr/sbin/ip'
dracut: FAILED: /usr/lib/dracut/dracut-install -D /var/tmp/dracut.ODrioZ/initramfs -a /usr/sbin/ping /usr/sbin/ip
Fix it by not quoting the variable and bypassing SC2086 shellcheck.
Fixes: commit 86538ca6e2
("bash scripts: fix variable quoting issue")
Acked-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
nfs service will append extra mount options to kernel mount options.
Such as mountaddr/mountproto options. These options only represent
current mounting details of the 1st kernel, but may not appropriate
for the 2nd kernel for the same reason as commit
d4f04afa47 ("mkdumprd: drop some nfs
mount options when reading from kernel"). This patch will remove
these options.
Signed-off-by: Tao Liu <ltao@redhat.com>
Acked-by: Coiby Xu <coxu@redhat.com>
The return value of set_ck_kernel or set_grub_ck is wrongly being used
as the exit code. This hook should exit with 0 or it may result in
unexpected behavior of kernel-install.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Pingfan Liu <piliu@redhat.com>
To make things cleaner and more human readable, add a short comment for
the POSIX scripts.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
All non-POSIX syntax in second kernel are gone, tested on Fedora 34
with latest dracut, dash now works fine.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is a batch update done with:
shfmt -s -w kdump-lib.sh
Clean up code style and reduce code base size, no behaviour change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Fix a few ambiguous syntax issues and remove some unused variables.
Also refactor some code to make it more robust.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Get rid of let, and remove useless '$' on arithmetic variables.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Replace echo "$(cmd)" and "var=$(cmd); echo $var" with just `cmd`.
And remove some useless cat.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This fixes word splitting issue with nmcli args. Current kexec-tools
scripts won't call nmcli with correct arguments when there are space in
network interface name.
nmcli expects multiple parameters, but get_nmcli_value_by_field only
accepts two params and depends on shell word splitting to split the
_nm_show_cmd into multiple params, which is very fragile.
So switch the param order, simplified this function and now multiple
params can be used properly.
And get_nmcli_connection_show_cmd_by_ifname returns multiple
nmcli params in a single variable, it depend on shell word splitting to
split the words when calling nmcli. But this is very fragile and break
easily when there are any special character in the connection path.
This function is only introduced to get and cache the nmcli command
which contains the "connection name".
Actually only cache the "connection path" is enough. Callers should
just call get_nmcli_connection_apath_by_ifname to cache the path, and
a new helper get_nmcli_field_by_conpath is introduced here to get value
from nmcli. This way "connection path" can contain any character.
Also get rid of another nmcli_cmd usage in
get_nmcli_connection_apath_by_ifname which stores multiple params in a
single bash variable separated by space.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Updated file syntax with following command:
sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdump-lib.sh
(replace '[ ]' with '[[ ]]')
sed -i -e 's/`\([^`]*\)`/\$(\1)/g' kdump-lib.sh
(replace `...` with $(...))
And manually updated [[ ... -a ... ]] and [[ ... -o ... ]] with && and
||.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
POSIX doesn't support keyword local, so add double underscore and prefix
to variable names, and reduce variable usage, to avoid any variable name
conflict.
Also reformat the code with `shfmt -s -w kdump-lib-initramfs.sh`.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is done with `shfmt -w -s dracut-kdump.sh`. There is no behaviour
change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
POSIX doesn't support keyword `local`, so this commit reduced variable usage.
Heredoc ("<<<") operation is also not supported, so kdump.conf is now pre-parse
into a temp file. Also fixes many POSIX syntax errors.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Set pipefail will cause POSIX shell to exit with failure. So only do
that in bash.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
There is a workaround for `scp` that it expects IPv6 address to be
quoted with [ ... ], only apply the workaround once and store the
updated `scp` address to reuse it.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
`add_dump_code "<op>"` is just `DUMP_INSTRUCTION="<op>"`, no need a
extra wrapper for that.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
monitor_dd_progress is the only extra binary in KDUMP_SCRIPT_DIR, no
need to change PATH environment variable, just call it directly.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
These dump related functions are only used by dracut-kdump.sh.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
kdump-error-handler.sh does nothing except calling three functions,
it can be easily merged into kdump.sh by using a parameter to run the
error handling routine.
kdump-lib-initramfs.sh was created to hold the three shared functions
and related code, so by merging these two files, kdump-lib-initramfs.sh
can be simplified by a lot.
Following up commits will clean up kdump-lib-initramfs.sh.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Move all functions needed in the second kernel from kdump-lib.sh
to kdump-lib-initramfs.sh, and update shebang headers.
Now, kdump-lib-initramfs.sh is an independent lib script, no longer
depend on kdump-lib.sh, and kdump-lib.sh is no longer needed for
the second kernel.
In later commits, functions in kdump-lib-initramfs.sh will be reworked
to be POSIX compatible, kdump-lib.sh will contain bash only functions.
POSIX shell have very limited features, eg. `local` keyword doesn't
exist in POSIX but we rely on that heavily. So kdump-lib.sh will
use bash syntax and contain the most complex helper and codes.
kdump-lib-initramfs.sh will contain the minimum set of helpers,
and be shared by both the first and second kernel.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is a batch update done with:
shfmt -s -w mkfadumprd mkdumprd kdumpctl *-module-setup.sh
Clean up code style and reduce code base size, no behaviour change.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Declare and assign separately to avoid masking return values:
https://github.com/koalaman/shellcheck/wiki/SC2155
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
kdumpctl, mkdumprd, *-module-setup.sh only target bash, since they
only run in first kernel and depend on dracut, and dracut depends
on bash. So use '[[ ]]' to replace '[ ]'.
This is a batch update done with following command:
`sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdumpctl, mkdumprd, *-module-setup.sh`
and replaced [ ... -a ... ] with [[ ... ]] && [[ ... ]] manually.
See https://tldp.org/LDP/abs/html/testconstructs.html for more details
on '[[ ]]', it's more versatile, safer, and slightly faster than '[ ]'.
This will also help shfmt to clean up the code in later commits.
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
This is a batch update done with following command:
`sed -i -e 's/`\([^`]*\)`/\$(\1)/g' mkfadumprd mkdumprd \
kdumpctl dracut-module-setup.sh dracut-fadump-module-setup.sh \
dracut-early-kdump-module-setup.sh`
And manually converted some corner cases. This fixes
all related issues detected by shellcheck.
Make it easier to do clean up in later commits.
Check following link for reasons to switch to the new syntax:
https://github.com/koalaman/shellcheck/wiki/SC2006
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Use bash builtin string substitution instead, as suggested by:
https://github.com/koalaman/shellcheck/wiki/SC2001
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Some `cat` calls are useless, remove them to make it cleaner.
See: https://github.com/koalaman/shellcheck/wiki/SC2002
Signed-off-by: Kairui Song <kasong@redhat.com>
Acked-by: Philipp Rudo <prudo@redhat.com>
Some functions are executed in subshell to avoid variable environment
pollution. But the surrounding $() is not needed, and it may lead to
executing output which is unexpected here.
See: https://github.com/koalaman/shellcheck/wiki/SC2091
Signed-off-by: Kairui Song <kasong@redhat.com>
Suggested-by: Coiby Xu <coxu@redhat.com>