kernel/Makefile.rhelver
Jan Stancek f57e433d38 kernel-5.14.0-319.el9
* Thu May 25 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-319.el9]
- platform/x86/intel/ifs: Update IFS doc (David Arcari) [2153901]
- platform/x86/intel/ifs: Implement Array BIST test (David Arcari) [2153901]
- platform/x86/intel/ifs: Sysfs interface for Array BIST (David Arcari) [2153901]
- platform/x86/intel/ifs: Introduce Array Scan test to IFS (David Arcari) [2153901]
- x86/include/asm/msr-index.h: Add IFS Array test bits (David Arcari) [2153901]
- platform/x86/intel/ifs: IFS cleanup (David Arcari) [2153901]
- platform/x86/intel/ifs: Reorganize driver data (David Arcari) [2153901]
- platform/x86/intel/ifs: Separate ifs_pkg_auth from ifs_data (David Arcari) [2153901]
- SUNRPC: Fix encoding of accepted but unsuccessful RPC replies (Scott Mayhew) [2209231]
- tools/power/x86/intel-speed-select: Add Emerald Rapid quirk (David Arcari) [2162165]
- fuse: wait for writepages in syncfs (Brian Foster) [2189470]
- virtio_fs: Modify format for virtio_fs_direct_access (Brian Foster) [2189470]
- virtiofs: delete unused parameter for virtio_fs_cleanup_vqs (Brian Foster) [2189470]
- virtiofs: use strscpy for copying the queue name (Brian Foster) [2189470]
- block: do not reverse request order when flushing plug list (Ming Lei) [2090016]
- time/hrtimer: Embed hrtimer mode into hrtimer_sleeper (Juri Lelli) [2203224]
- time/hrtimer: Add PINNED_HARD mode for realtime hrtimers (Juri Lelli) [2203224]
- erspan: get the proto with the md version for collect_md (Xin Long) [2140037]
- gpio: imx-scu: add imx-scu GPIO driver (Steve Best) [2184172]
- memory: tegra30-emc: fix interconnect registration race (Mark Salter) [2181001]
- memory: tegra20-emc: fix interconnect registration race (Mark Salter) [2181001]
- memory: tegra124-emc: fix interconnect registration race (Mark Salter) [2181001]
- memory: tegra: fix interconnect registration race (Mark Salter) [2181001]
- interconnect: fix provider registration API (Mark Salter) [2181001]
- interconnect: fix icc_provider_del() error handling (Mark Salter) [2181001]
- interconnect: fix mem leak when freeing nodes (Mark Salter) [2181001]
- interconnect: move ignore_list out of of_count_icc_providers() (Mark Salter) [2181001]
- interconnect: Make icc_provider_del() return void (Mark Salter) [2181001]
- interconnect: sm8450: Ignore return value of icc_provider_del() in .remove() (Mark Salter) [2181001]
- interconnect: osm-l3: Ignore return value of icc_provider_del() in .remove() (Mark Salter) [2181001]
- interconnect: msm8974: Ignore return value of icc_provider_del() in .remove() (Mark Salter) [2181001]
- interconnect: icc-rpmh: Ignore return value of icc_provider_del() in .remove() (Mark Salter) [2181001]
- interconnect: icc-rpm: Ignore return value of icc_provider_del() in .remove() (Mark Salter) [2181001]
- memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings() (Mark Salter) [2181001]
- memory: of: Fix refcount leak bug in of_get_ddr_timings() (Mark Salter) [2181001]
- redhat/configs: enable TEGRA186_GPC_DMA driver (Mark Salter) [2181001]
- dmaengine: tegra: explicitly select DMA_VIRTUAL_CHANNELS (Mark Salter) [2181001]
- pinctrl: tegra: Separate Tegra194 instances (Mark Salter) [2181001]
- clk: tegra20: Fix refcount leak in tegra20_clock_init (Mark Salter) [2181001]
- clk: tegra: Fix refcount leak in tegra114_clock_init (Mark Salter) [2181001]
- clk: tegra: Fix refcount leak in tegra210_clock_init (Mark Salter) [2181001]
- clk: tegra: Add missing of_node_put() (Mark Salter) [2181001]
- cpufreq: tegra194: change tegra239_cpufreq_soc to static (Mark Salter) [2181001]
- cpufreq: tegra194: Add support for Tegra239 (Mark Salter) [2181001]
- cpufreq: tegra194: Remove the unneeded result variable (Mark Salter) [2181001]
- pwm: tegra: Implement .apply() callback (Mark Salter) [2181001]
- clk: tegra: Update kerneldoc to match prototypes (Mark Salter) [2181001]
- clk: tegra: Add missing reset deassertion (Mark Salter) [2181001]
- reset: tegra-bpmp: Restore Handle errors in BPMP response (Mark Salter) [2181001]
- clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver (Mark Salter) [2181001]
- pwm: tegra: Rename variable pointing to driver private data (Mark Salter) [2181001]
- clk: tegra: Support runtime PM and power domain (Mark Salter) [2181001]
- clk: tegra: Make vde a child of pll_p on tegra114 (Mark Salter) [2181001]
- reset: tegra-bpmp: Revert Handle errors in BPMP response (Mark Salter) [2181001]
- reset: tegra-bpmp: Handle errors in BPMP response (Mark Salter) [2181001]
- clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock (Mark Salter) [2181001]
- clk: tegra: fix old-style declaration (Mark Salter) [2181001]
- dmaengine: tegra: Fix memory leak in terminate_all() (Mark Salter) [2181001]
- memory: tegra: Remove clients SID override programming (Mark Salter) [2181001]
- soc: tegra: fix CPU_BIG_ENDIAN dependencies (Mark Salter) [2181001]
- pwm: tegra: Fix 32 bit build (Mark Salter) [2181001]
- dmaengine: tegra: Add support for dma-channel-mask (Mark Salter) [2181001]
- cpufreq: tegra186: Use flexible array to simplify memory allocation (Mark Salter) [2181001]
- memory: tegra: Add API for retrieving carveout bounds (Mark Salter) [2181001]
- tegra: mark BPMP driver as little-endian only (Mark Salter) [2181001]
- memory: tegra186-emc: use DEFINE_SHOW_ATTRIBUTE to simplify code (Mark Salter) [2181001]
- memory: tegra210-emc: use DEFINE_SHOW_ATTRIBUTE to simplify code (Mark Salter) [2181001]
- memory: tegra30-emc: use DEFINE_SHOW_ATTRIBUTE to simplify code (Mark Salter) [2181001]
- memory: tegra20-emc: use DEFINE_SHOW_ATTRIBUTE to simplify code (Mark Salter) [2181001]
- phy: tegra: xusb: Use dev_err_probe() to simplify code (Mark Salter) [2181001]
- phy: tegra: xusb: Only warn once about reset problems in .remove() (Mark Salter) [2181001]
- firmware: tegra: Remove surplus dev_err() when using platform_get_irq_byname() (Mark Salter) [2181001]
- firmware: tegra: include IVC header file only once (Mark Salter) [2181001]
- phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration (Mark Salter) [2181001]
- scsi: smartpqi: Update version to 2.1.22-040 (Don Brace) [2162109]
- scsi: smartpqi: Update copyright to 2023 (Don Brace) [2162109]
- scsi: smartpqi: Add sysfs entry for NUMA node in /sys/block/sdX/device (Don Brace) [2162109]
- scsi: smartpqi: Stop sending driver-initiated TURs (Don Brace) [2162109]
- scsi: smartpqi: Fix byte aligned writew for ARM servers (Don Brace) [2162109]
- scsi: smartpqi: Add support for RAID NCQ priority (Don Brace) [2162109]
- scsi: smartpqi: Validate block layer host tag (Don Brace) [2162109]
- scsi: smartpqi: Remove contention for raid_bypass_cnt (Don Brace) [2162109]
- scsi: smartpqi: Fix rare SAS transport memory leak (Don Brace) [2162109]
- scsi: smartpqi: Remove NULL pointer check (Don Brace) [2162109]
- scsi: smartpqi: Add new controller PCI IDs (Don Brace) [2162109]
- scsi: smartpqi: Map full length of PCI BAR 0 (Don Brace) [2162109]
- scsi: smartpqi: Replace one-element array with flexible-array member (Don Brace) [2162109]
Resolves: rhbz#2090016, rhbz#2140037, rhbz#2153901, rhbz#2162109, rhbz#2162165, rhbz#2181001, rhbz#2184172, rhbz#2189470, rhbz#2203224, rhbz#2209231

Signed-off-by: Jan Stancek <jstancek@redhat.com>
2023-05-25 18:02:35 +02:00

68 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 3
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 319
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif