kernel/kernel.spec

# All Global changes to build and install go here.
# Per the below section about __spec_install_pre, any rpm
# environment changes that affect %%install need to go
# here before the %%install macro is pre-built.

# Disable LTO in userspace packages.
%global _lto_cflags %{nil}

# Option to enable compiling with clang instead of gcc.
%bcond_with toolchain_clang

%if %{with toolchain_clang}
%global toolchain clang
%endif

# Compile the kernel with LTO (only supported when building with clang).
%bcond_with clang_lto

%if %{with clang_lto} && %{without toolchain_clang}
{error:clang_lto requires --with toolchain_clang}
%endif

# Cross compile on copr for arm
# See https://bugzilla.redhat.com/1879599
%if 0%{?_with_cross_arm:1}
%global _target_cpu armv7hl
%global _arch arm
%global _build_arch arm
%global _with_cross    1
%endif

# RPM macros strip everything in BUILDROOT, either with __strip
# or find-debuginfo.sh. Make use of __spec_install_post override
# and save/restore binaries we want to package as unstripped.
%define buildroot_unstripped %{_builddir}/root_unstripped
%define buildroot_save_unstripped() \
(cd %{buildroot}; cp -rav --parents -t %{buildroot_unstripped}/ %1 || true) \
%{nil}
%define __restore_unstripped_root_post \
    echo "Restoring unstripped artefacts %{buildroot_unstripped} -> %{buildroot}" \
    cp -rav %{buildroot_unstripped}/. %{buildroot}/ \
%{nil}

# The kernel's %%install section is special
# Normally the %%install section starts by cleaning up the BUILD_ROOT
# like so:
#
# %%__spec_install_pre %%{___build_pre}\
#     [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
#     mkdir -p `dirname "$RPM_BUILD_ROOT"`\
#     mkdir "$RPM_BUILD_ROOT"\
# %%{nil}
#
# But because of kernel variants, the %%build section, specifically
# BuildKernel(), moves each variant to its final destination as the
# variant is built.  This violates the expectation of the %%install
# section.  As a result we snapshot the current env variables and
# purposely leave out the removal section.  All global wide changes
# should be added above this line otherwise the %%install section
# will not see them.
%global __spec_install_pre %{___build_pre}

# Replace '-' with '_' where needed so that variants can use '-' in
# their name.
%define uname_suffix %{lua:
	local flavour = rpm.expand('%{?1:+%{1}}')
	flavour = flavour:gsub('-', '_')
	if flavour ~= '' then
		print(flavour)
	end
}

# This returns the main kernel tied to a debug variant. For example,
# kernel-debug is the debug version of kernel, so we return an empty
# string. However, kernel-64k-debug is the debug version of kernel-64k,
# in this case we need to return "64k", and so on. This is used in
# macros below where we need this for some uname based requires.
%define uname_variant %{lua:
	local flavour = rpm.expand('%{?1:%{1}}')
	_, _, main, sub = flavour:find("(%w+)-(.*)")
	if main then
		print("+" .. main)
	end
}


# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
# compression for rpms (xz, level 2).
# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
# to compress by single-threaded xz. Switch to threaded compression,
# and from level 2 to 3 to keep compressed sizes close to "w2" results.
#
# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
# this one might need tweaking (e.g. if default changes to w3.xzdio,
# change below to w4T.xzdio):
#
# This is disabled on i686 as it triggers oom errors

%ifnarch i686
%define _binary_payload w3T.xzdio
%endif

Summary: The Linux kernel
%if 0%{?fedora}
%define secure_boot_arch x86_64
%else
%define secure_boot_arch x86_64 aarch64 s390x ppc64le
%endif

# Signing for secure boot authentication
%ifarch %{secure_boot_arch}
%global signkernel 1
%else
%global signkernel 0
%endif

# Sign modules on all arches
%global signmodules 1

# Compress modules only for architectures that build modules
%ifarch noarch
%global zipmodules 0
%else
%global zipmodules 1
%endif

%ifarch x86_64
%global efiuki 1
%else
%global efiuki 0
%endif

# Default compression algorithm
%global compression xz
%global compression_flags --compress
%global compext xz
%if %{zipmodules}
%global zipsed -e 's/\.ko$/\.ko.%compext/'
# for parallel xz processes, replace with 1 to go back to single process
%endif

%if 0%{?fedora}
%define primary_target fedora
%else
%define primary_target rhel
%endif

#
# genspec.sh variables
#

# Include Fedora files
%global include_fedora 0
# Include RHEL files
%global include_rhel 1
# Provide Patchlist.changelog file
%global patchlist_changelog 0
# Set debugbuildsenabled to 1 to build separate base and debug kernels
#  (on supported architectures). The kernel-debug-* subpackages will
#  contain the debug kernel.
# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
#  to build the base kernel using the debug configuration. (Specifying
#  the --with-release option overrides this setting.)
%define debugbuildsenabled 1
# define buildid .local
%define specversion 5.14.0
%define patchversion 5.14
%define pkgrelease 512
%define kversion 5
%define tarfile_release 5.14.0-512.el9
# This is needed to do merge window version magic
%define patchlevel 14
# This allows pkg_release to have configurable %%{?dist} tag
%define specrelease 512%{?buildid}%{?dist}
# This defines the kabi tarball version
%define kabiversion 5.14.0-512.el9

#
# End of genspec.sh variables
#

%define pkg_release %{specrelease}

# libexec dir is not used by the linker, so the shared object there
# should not be exported to RPM provides
%global __provides_exclude_from ^%{_libexecdir}/kselftests

# The following build options are enabled by default, but may become disabled
# by later architecture-specific checks. These can also be disabled by using
# --without <opt> in the rpmbuild command, or by forcing these values to 0.
#
# standard kernel
%define with_up        %{?_without_up:        0} %{?!_without_up:        1}
# kernel PAE (only valid for ARM (lpae))
%define with_pae       %{?_without_pae:       0} %{?!_without_pae:       1}
# kernel-debug
%define with_debug     %{?_without_debug:     0} %{?!_without_debug:     1}
# kernel-zfcpdump (s390 specific kernel for zfcpdump)
%define with_zfcpdump  %{?_without_zfcpdump:  0} %{?!_without_zfcpdump:  1}
# kernel-64k (aarch64 kernel with 64K page_size)
%define with_arm64_64k %{?_without_arm64_64k: 0} %{?!_without_arm64_64k: 1}
# kernel-rt (x86_64 and aarch64 only PREEMPT_RT enabled kernel)
%define with_realtime  %{?_without_realtime:  0} %{?!_without_realtime:  1}
# kernel-doc
%define with_doc       %{?_without_doc:       0} %{?!_without_doc:       1}
# kernel-headers
%define with_headers   %{?_without_headers:   0} %{?!_without_headers:   1}
%define with_cross_headers   %{?_without_cross_headers:   0} %{?!_without_cross_headers:   1}
# perf
%define with_perf      %{?_without_perf:      0} %{?!_without_perf:      1}
# tools
%define with_tools     %{?_without_tools:     0} %{?!_without_tools:     1}
# bpf tool
%define with_bpftool   %{?_without_bpftool:   0} %{?!_without_bpftool:   1}
# kernel-debuginfo
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
# kernel-abi-stablelists
%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
# internal samples and selftests
%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
#
# Additional options for user-friendly one-off kernel building:
#
# Only build the base kernel (--with baseonly):
%define with_baseonly  %{?_with_baseonly:     1} %{?!_with_baseonly:     0}
# Only build the pae kernel (--with paeonly):
%define with_paeonly   %{?_with_paeonly:      1} %{?!_with_paeonly:      0}
# Only build the debug kernel (--with dbgonly):
%define with_dbgonly   %{?_with_dbgonly:      1} %{?!_with_dbgonly:      0}
# Only build the realtime kernel (--with rtonly):
%define with_rtonly    %{?_with_rtonly:       1} %{?!_with_rtonly:       0}
# Control whether we perform a compat. check against published ABI.
%define with_kabichk   %{?_without_kabichk:   0} %{?!_without_kabichk:   1}
# Temporarily disable kabi checks until RC.
%define with_kabichk 0
# Control whether we perform a compat. check against DUP ABI.
%define with_kabidupchk %{?_with_kabidupchk:  1} %{?!_with_kabidupchk:   0}
#
# Control whether to run an extensive DWARF based kABI check.
# Note that this option needs to have baseline setup in SOURCE300.
%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
#
# Control whether to install the vdso directories.
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
#
# should we do C=1 builds with sparse
%define with_sparse    %{?_with_sparse:       1} %{?!_with_sparse:       0}
#
# Cross compile requested?
%define with_cross    %{?_with_cross:         1} %{?!_with_cross:        0}
#
# build a release kernel on rawhide
%define with_release   %{?_with_release:      1} %{?!_with_release:      0}

# verbose build, i.e. no silent rules and V=1
%define with_verbose %{?_with_verbose:        1} %{?!_with_verbose:      0}

#
# check for mismatched config options
%define with_configchecks %{?_without_configchecks:        0} %{?!_without_configchecks:        1}

#
# gcov support
%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}

#
# ipa_clone support
%define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1}

# Want to build a vanilla kernel build without any non-upstream patches?
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}

%if 0%{?fedora}
# Kernel headers are being split out into a separate package
%define with_headers 0
%define with_cross_headers 0
# no ipa_clone for now
%define with_ipaclones 0
# no stablelist
%define with_kernel_abi_stablelists 0
# Fedora builds these separately
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%endif

%if %{with_verbose}
%define make_opts V=1
%else
%define make_opts -s
%endif

%if %{with toolchain_clang}
%ifarch s390x ppc64le
%global llvm_ias 0
%else
%global llvm_ias 1
%endif
%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
%if %{with clang_lto}
%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
%endif
%global make_opts %{make_opts} %{clang_make_opts}
# clang does not support the -fdump-ipa-clones option
%global with_ipaclones 0
%endif

# turn off debug kernel and kabichk for gcov builds
%if %{with_gcov}
%define with_debug 0
%define with_kabichk 0
%define with_kabidupchk 0
%define with_kabidwchk 0
%define with_kabidw_base 0
%define with_kernel_abi_stablelists 0
%endif

# turn off kABI DWARF-based check if we're generating the base dataset
%if %{with_kabidw_base}
%define with_kabidwchk 0
%endif

# kpatch_kcflags are extra compiler flags applied to base kernel
# -fdump-ipa-clones is enabled only for base kernels on selected arches
%if %{with_ipaclones}
%ifarch x86_64 ppc64le
%define kpatch_kcflags -fdump-ipa-clones
%else
%define with_ipaclones 0
%endif
%endif

%define make_target bzImage
%define image_install_path boot

%define KVERREL %{version}-%{release}.%{_target_cpu}
%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
%define hdrarch %_target_cpu
%define asmarch %_target_cpu

%if 0%{!?nopatches:1}
%define nopatches 0
%endif

%if %{with_vanilla}
%define nopatches 1
%endif

%if %{with_release}
%define debugbuildsenabled 1
%endif

%if !%{with_debuginfo}
%define _enable_debug_packages 0
%endif
%define debuginfodir /usr/lib/debug
# Needed because we override almost everything involving build-ids
# and debuginfo generation. Currently we rely on the old alldebug setting.
%global _build_id_links alldebug

# kernel PAE is only built on ARMv7
%ifnarch armv7hl
%define with_pae 0
%endif

# RT kernel is only built on x86_64 and aarch64
%ifnarch x86_64 aarch64
%define with_realtime 0
%endif

# if requested, only build base kernel
%if %{with_baseonly}
%define with_pae 0
%define with_debug 0
%define with_realtime 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# if requested, only build pae kernel
%if %{with_paeonly}
%define with_up 0
%define with_debug 0
%define with_realtime 0
%endif

# if requested, only build debug kernel
%if %{with_dbgonly}
%define with_up 0
%define with_realtime 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# if requested, only build realtime kernel
%if %{with_rtonly}
%define with_up 0
%define with_pae 0
%define with_debug 0
%define with_vdso_install 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_kernel_abi_stablelists 0
%define with_selftests 0
%define with_cross 0
%define with_cross_headers 0
%define with_ipaclones 0
%endif

# turn off kABI DUP check and DWARF-based check if kABI check is disabled
%if !%{with_kabichk}
%define with_kabidupchk 0
%define with_kabidwchk 0
%endif

%if %{with_vdso_install}
%define use_vdso 1
%endif

# selftests require bpftool to be built.  If bpftools is disabled, then disable selftests
%if %{with_bpftool} == 0
%define with_selftests 0
%endif

%ifnarch noarch
%define with_kernel_abi_stablelists 0
%endif

# Overrides for generic default options

# only package docs noarch
%ifnarch noarch
%define with_doc 0
%define doc_build_fail true
%endif

%if 0%{?fedora}
# don't do debug builds on anything but i686 and x86_64
%ifnarch i686 x86_64
%define with_debug 0
%endif
%endif

# don't build noarch kernels or headers (duh)
%ifarch noarch
%define with_up 0
%define with_realtime 0
%define with_headers 0
%define with_cross_headers 0
%define with_tools 0
%define with_perf 0
%define with_bpftool 0
%define with_selftests 0
%define with_debug 0
%define all_arch_configs kernel-%{version}-*.config
%endif

# sparse blows up on ppc
%ifnarch ppc64le
%define with_sparse 0
%endif

# zfcpdump mechanism is s390 only
%ifnarch s390x
%define with_zfcpdump 0
%endif

# 64k variant only for aarch64
%ifnarch aarch64
%define with_arm64_64k 0
%endif

%if 0%{?fedora}
# This is not for Fedora
%define with_zfcpdump 0
%endif

# Per-arch tweaks

%ifarch i686
%define asmarch x86
%define hdrarch i386
%define all_arch_configs kernel-%{version}-i?86*.config
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch x86_64
%define asmarch x86
%define all_arch_configs kernel-%{version}-x86_64*.config
%define kernel_image arch/x86/boot/bzImage
%endif

%ifarch ppc64le
%define asmarch powerpc
%define hdrarch powerpc
%define make_target vmlinux
%define kernel_image vmlinux
%define kernel_image_elf 1
%define use_vdso 0
%define all_arch_configs kernel-%{version}-ppc64le*.config
%endif

%ifarch s390x
%define asmarch s390
%define hdrarch s390
%define all_arch_configs kernel-%{version}-s390x.config
%define kernel_image arch/s390/boot/bzImage
%define vmlinux_decompressor arch/s390/boot/compressed/vmlinux
%endif

%ifarch %{arm}
%define all_arch_configs kernel-%{version}-arm*.config
%define skip_nonpae_vdso 1
%define asmarch arm
%define hdrarch arm
%define make_target bzImage
%define kernel_image arch/arm/boot/zImage
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
# we only build headers/perf/tools on the base arm arches
# just like we used to only build them on i386 for x86
%ifnarch armv7hl
%define with_headers 0
%define with_cross_headers 0
%endif
# These currently don't compile on armv7
%define with_selftests 0
%endif

%ifarch aarch64
%define all_arch_configs kernel-%{version}-aarch64*.config
%define asmarch arm64
%define hdrarch arm64
%define make_target vmlinuz.efi
%define kernel_image arch/arm64/boot/vmlinuz.efi
%endif

# Should make listnewconfig fail if there's config options
# printed out?
%if %{nopatches}
%define with_configchecks 0
%endif

# To temporarily exclude an architecture from being built, add it to
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
# don't build kernel-headers then the new build system will no longer let
# us use the previous build of that package -- it'll just be completely AWOL.
# Which is a BadThing(tm).

# We only build kernel-headers on the following...
%if 0%{?fedora}
%define nobuildarches i386
%else
%define nobuildarches i386 i686 %{arm}
%endif

%ifarch %nobuildarches
# disable BuildKernel commands
%define with_up 0
%define with_debug 0
%define with_pae 0
%define with_zfcpdump 0
%define with_arm64_64k 0
%define with_realtime 0

%define with_debuginfo 0
%define with_perf 0
%define with_tools 0
%define with_bpftool 0
%define with_selftests 0
%define _enable_debug_packages 0
%endif

# Architectures we build tools/cpupower on
%if 0%{?fedora}
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
%else
%define cpupowerarchs i686 x86_64 ppc64le aarch64
%endif

%if 0%{?use_vdso}

%if 0%{?skip_nonpae_vdso}
%define _use_vdso 0
%else
%define _use_vdso 1
%endif

%else
%define _use_vdso 0
%endif

# If build of debug packages is disabled, we need to know if we want to create
# meta debug packages or not, after we define with_debug for all specific cases
# above. So this must be at the end here, after all cases of with_debug or not.
%define with_debug_meta 0
%if !%{debugbuildsenabled}
%if %{with_debug}
%define with_debug_meta 1
%endif
%define with_debug 0
%endif


#
# Packages that need to be installed before the kernel is, because the %%post
# scripts use them.
#
%define kernel_prereq  coreutils, systemd >= 203-2, /usr/bin/kernel-install
%define initrd_prereq  dracut >= 027


Name: kernel
License: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-2-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR CDDL-1.0) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR MIT) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-3-Clause-Clear AND GFDL-1.1-no-invariants-or-later AND GPL-1.0-or-later AND (GPL-1.0-or-later OR BSD-3-Clause) AND (GPL-1.0-or-later WITH Linux-syscall-note) AND GPL-2.0-only AND (GPL-2.0-only OR Apache-2.0) AND (GPL-2.0-only OR BSD-2-Clause) AND (GPL-2.0-only OR BSD-3-Clause) AND (GPL-2.0-only OR CDDL-1.0) AND (GPL-2.0-only OR GFDL-1.1-no-invariants-or-later) AND (GPL-2.0-only OR GFDL-1.2-no-invariants-only) AND (GPL-2.0-only WITH Linux-syscall-note) AND GPL-2.0-or-later AND (GPL-2.0-or-later OR BSD-2-Clause) AND (GPL-2.0-or-later OR BSD-3-Clause) AND (GPL-2.0-or-later OR CC-BY-4.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND ISC AND LGPL-2.0-or-later AND (LGPL-2.0-or-later OR BSD-2-Clause) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND LGPL-2.1-only AND (LGPL-2.1-only OR BSD-2-Clause) AND (LGPL-2.1-only WITH Linux-syscall-note) AND LGPL-2.1-or-later AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND (Linux-OpenIB OR GPL-2.0-only) AND (Linux-OpenIB OR GPL-2.0-only OR BSD-2-Clause) AND Linux-man-pages-copyleft AND MIT AND (MIT OR GPL-2.0-only) AND (MIT OR GPL-2.0-or-later) AND (MIT OR LGPL-2.1-only) AND (MPL-1.1 OR GPL-2.0-only) AND (X11 OR GPL-2.0-only) AND (X11 OR GPL-2.0-or-later) AND Zlib
URL: https://www.kernel.org/
Version: %{specversion}
Release: %{pkg_release}
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
# SET %%nobuildarches (ABOVE) INSTEAD
%if 0%{?fedora}
ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
%else
ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
%endif
ExclusiveOS: Linux
%ifnarch %{nobuildarches}
Requires: kernel-core-uname-r = %{KVERREL}
Requires: kernel-modules-uname-r = %{KVERREL}
Requires: kernel-modules-core-uname-r = %{KVERREL}
Provides: installonlypkg(kernel)
%endif


#
# List the packages used during the kernel build
#
BuildRequires: kmod, bash, coreutils, tar, git-core, which
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk, %compression
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
BuildRequires: net-tools, hostname, bc, elfutils-devel
BuildRequires: dwarves
BuildRequires: python3-devel
BuildRequires: gcc-plugin-devel
BuildRequires: kernel-rpm-macros >= 185-9
# glibc-static is required for a consistent build environment (specifically
# CONFIG_CC_CAN_LINK_STATIC=y).
BuildRequires: glibc-static
%if %{with_headers}
BuildRequires: rsync
%endif
%if %{with_doc}
BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme, python3-pyyaml
%endif
%if %{with_sparse}
BuildRequires: sparse
%endif
%if %{with_perf}
BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
BuildRequires: audit-libs-devel python3-setuptools
BuildRequires: java-devel
BuildRequires: libbpf-devel >= 0.6.0-1
BuildRequires: libbabeltrace-devel
BuildRequires: libtraceevent-devel
%ifnarch %{arm} s390x
BuildRequires: numactl-devel
%endif
%ifarch aarch64
BuildRequires: opencsd-devel >= 1.2.1
%endif
%endif
%if %{with_tools}
BuildRequires: gettext ncurses-devel
BuildRequires: libcap-devel libcap-ng-devel
# The following are rtla requirements
BuildRequires: python3-docutils
BuildRequires: libtraceevent-devel
BuildRequires: libtracefs-devel

%ifnarch s390x
BuildRequires: pciutils-devel
%endif
%ifarch i686 x86_64
BuildRequires: libnl3-devel
%endif
%endif
%if %{with_tools} || %{signmodules} || %{signkernel}
BuildRequires: openssl-devel
%endif
%if %{with_bpftool}
BuildRequires: python3-docutils
BuildRequires: zlib-devel binutils-devel
%endif
%if %{with_selftests}
BuildRequires: clang llvm fuse-devel
%ifarch x86_64
BuildRequires: lld
%endif
%ifnarch %{arm}
BuildRequires: numactl-devel
%endif
BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
%endif
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
%if %{with_debuginfo}
BuildRequires: rpm-build, elfutils
BuildConflicts: rpm < 4.13.0.1-19
BuildConflicts: dwarves < 1.13
# Most of these should be enabled after more investigation
%undefine _include_minidebuginfo
%undefine _find_debuginfo_dwz_opts
%undefine _unique_build_ids
%undefine _unique_debug_names
%undefine _unique_debug_srcs
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
# Remove -q option below to provide 'extracting debug info' messages
%global _find_debuginfo_opts -r -q
%global _missing_build_ids_terminate_build 1
%global _no_recompute_build_ids 1
%endif
%if %{with_kabidwchk} || %{with_kabidw_base}
BuildRequires: kabi-dw
%endif

%if %{signkernel}%{signmodules}
BuildRequires: openssl
%if %{signkernel}
# ELN uses Fedora signing process, so exclude
%if 0%{?rhel}%{?centos} && !0%{?eln}
BuildRequires: system-sb-certs
%endif
%ifarch x86_64 aarch64
BuildRequires: nss-tools
BuildRequires: pesign >= 0.10-4
%endif
%endif
%endif

%if %{with_cross}
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
%define __strip %{_build_arch}-linux-gnu-strip
%endif

# These below are required to build man pages
%if %{with_perf}
BuildRequires: xmlto
%endif
%if %{with_perf} || %{with_tools}
BuildRequires: asciidoc
%endif

%if %{with toolchain_clang}
BuildRequires: clang
%endif

%if %{with clang_lto}
BuildRequires: llvm
BuildRequires: lld
%endif

%if %{efiuki}
BuildRequires: dracut >= 057-67.git20240812.el9
# For dracut UEFI uki binaries
BuildRequires: binutils
# For the initrd
BuildRequires: lvm2
# For systemd-stub
BuildRequires: systemd-boot-unsigned
# For systemd-pcrphase
BuildRequires: systemd-udev >= 252-1
# For UKI kernel cmdline addons
BuildRequires: systemd-ukify
# For TPM operations in UKI initramfs
BuildRequires: tpm2-tools
# For Azure CVM specific udev rules
BuildRequires: WALinuxAgent-cvm
# For UKI sb cert
%if 0%{?centos}
BuildRequires: centos-sb-certs >= 9.0-23
%else
BuildRequires: redhat-sb-certs >= 9.4-0.1
%endif
%endif

# Because this is the kernel, it's hard to get a single upstream URL
# to represent the base without needing to do a bunch of patching. This
# tarball is generated from a src-git tree. If you want to see the
# exact git commit you can run
#
# xzcat -qq ${TARBALL} | git get-tar-commit-id
Source0: linux-%{tarfile_release}.tar.xz

Source1: Makefile.rhelver
Source2: kernel.changelog

%if %{signkernel}

# Name of the packaged file containing signing key
%ifarch ppc64le
%define signing_key_filename kernel-signing-ppc.cer
%endif
%ifarch s390x
%define signing_key_filename kernel-signing-s390.cer
%endif

%define secureboot_ca_0 %{_datadir}/pki/sb-certs/secureboot-ca-%{_arch}.cer
%define secureboot_key_0 %{_datadir}/pki/sb-certs/secureboot-kernel-%{_arch}.cer

%if 0%{?centos}
%define pesign_name_0 centossecureboot201
%else
%ifarch x86_64 aarch64
%define pesign_name_0 redhatsecureboot501
%endif
%ifarch s390x
%define pesign_name_0 redhatsecureboot302
%endif
%ifarch ppc64le
%define pesign_name_0 redhatsecureboot701
%endif
%endif

# signkernel
%endif

Source20: mod-denylist.sh
Source21: mod-sign.sh
Source22: parallel_xz.sh

%define modsign_cmd %{SOURCE21}

%if 0%{?include_rhel}
Source23: x509.genkey.rhel

Source24: kernel-aarch64-rhel.config
Source25: kernel-aarch64-debug-rhel.config
Source26: mod-extra.list.rhel

Source27: kernel-ppc64le-rhel.config
Source28: kernel-ppc64le-debug-rhel.config
Source29: kernel-s390x-rhel.config
Source30: kernel-s390x-debug-rhel.config
Source31: kernel-s390x-zfcpdump-rhel.config
Source32: kernel-x86_64-rhel.config
Source33: kernel-x86_64-debug-rhel.config

Source34: filter-x86_64.sh.rhel
Source35: filter-armv7hl.sh.rhel
Source37: filter-aarch64.sh.rhel
Source38: filter-ppc64le.sh.rhel
Source39: filter-s390x.sh.rhel
Source40: filter-modules.sh.rhel

Source41: x509.genkey.centos
# ARM64 64K page-size kernel config
Source42: kernel-aarch64-64k-rhel.config
Source43: kernel-aarch64-64k-debug-rhel.config

Source44: kernel-x86_64-rt-rhel.config
Source45: kernel-x86_64-rt-debug-rhel.config
Source46: kernel-aarch64-rt-rhel.config
Source47: kernel-aarch64-rt-debug-rhel.config
%endif

%if 0%{?include_fedora}
Source50: x509.genkey.fedora
Source51: mod-extra.list.fedora

Source52: kernel-aarch64-fedora.config
Source53: kernel-aarch64-debug-fedora.config
Source54: kernel-armv7hl-fedora.config
Source55: kernel-armv7hl-debug-fedora.config
Source56: kernel-armv7hl-lpae-fedora.config
Source57: kernel-armv7hl-lpae-debug-fedora.config
Source60: kernel-ppc64le-fedora.config
Source61: kernel-ppc64le-debug-fedora.config
Source62: kernel-s390x-fedora.config
Source63: kernel-s390x-debug-fedora.config
Source64: kernel-x86_64-fedora.config
Source65: kernel-x86_64-debug-fedora.config

Source67: filter-x86_64.sh.fedora
Source68: filter-armv7hl.sh.fedora
Source70: filter-aarch64.sh.fedora
Source71: filter-ppc64le.sh.fedora
Source72: filter-s390x.sh.fedora
Source73: filter-modules.sh.fedora
%endif

Source75: partial-kgcov-snip.config
Source80: generate_all_configs.sh
Source81: process_configs.sh

Source82: update_scripts.sh

Source84: mod-internal.list
Source85: mod-partner.list
Source86: mod-kvm.list

Source100: rheldup3.x509
Source101: rhelkpatch1.x509
Source102: rhelimaca1.x509
Source103: rhelima.x509
Source104: rhelima_centos.x509
Source105: nvidiagpuoot001.x509

%if 0%{?centos}
%define ima_signing_cert %{SOURCE104}
%else
%define ima_signing_cert %{SOURCE103}
%endif

%define ima_cert_name ima.cer

Source150: dracut-virt.conf

Source151: uki_create_addons.py
Source152: uki_addons.json

Source200: check-kabi

Source201: Module.kabi_aarch64
Source202: Module.kabi_ppc64le
Source203: Module.kabi_s390x
Source204: Module.kabi_x86_64

Source210: Module.kabi_dup_aarch64
Source211: Module.kabi_dup_ppc64le
Source212: Module.kabi_dup_s390x
Source213: Module.kabi_dup_x86_64

Source300: kernel-abi-stablelists-%{kabiversion}.tar.bz2
Source301: kernel-kabi-dw-%{kabiversion}.tar.bz2

# Sources for kernel-tools
Source2000: cpupower.service
Source2001: cpupower.config
Source2002: kvm_stat.logrotate

# Some people enjoy building customized kernels from the dist-git in Fedora and
# use this to override configuration options. One day they may all use the
# source tree, but in the mean time we carry this to support the legacy workflow
Source3000: merge.pl
Source3001: kernel-local
%if %{patchlist_changelog}
Source3002: Patchlist.changelog
%endif

Source4000: README.rst
Source4001: rpminspect.yaml
Source4002: gating.yaml

## Patches needed for building this package

%if !%{nopatches}

Patch1: patch-%{patchversion}-redhat.patch
%endif

# empty final patch to facilitate testing of kernel patches
Patch999999: linux-kernel-test.patch

# END OF PATCH DEFINITIONS

%description
The kernel meta package

#
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
#	%%kernel_reqprovconf [-o] <subpackage>
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
# macros defined above.
#
%define kernel_reqprovconf(o) \
%if %{-o:0}%{!-o:1}\
Provides: kernel = %{specversion}-%{pkg_release}\
%endif\
Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): %{initrd_prereq}\
Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
Recommends: linux-firmware\
Requires(preun): systemd >= 200\
Conflicts: xfsprogs < 4.3.0-1\
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
# We can't let RPM do the dependencies automatic because it'll then pick up\
# a correct but undesirable perl dependency from the module headers which\
# isn't required for the kernel proper to function\
AutoReq: no\
AutoProv: yes\
%{nil}


%package doc
Summary: Various documentation bits found in the kernel source
Group: Documentation
%description doc
This package contains documentation files from the kernel
source. Various bits of information about the Linux kernel and the
device drivers shipped with it are documented in these files.

You'll want to install this package if you need a reference to the
options that can be passed to Linux kernel modules at load time.


%package headers
Summary: Header files for the Linux kernel for use by glibc
Obsoletes: glibc-kernheaders < 3.0-46
Provides: glibc-kernheaders = 3.0-46
%description headers
Kernel-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs.  The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
glibc package.

%package cross-headers
Summary: Header files for the Linux kernel for use by cross-glibc
%description cross-headers
Kernel-cross-headers includes the C header files that specify the interface
between the Linux kernel and userspace libraries and programs.  The
header files define structures and constants that are needed for
building most standard programs and are also needed for rebuilding the
cross-glibc package.


%package debuginfo-common-%{_target_cpu}
Summary: Kernel source files used by %{name}-debuginfo packages
Provides: installonlypkg(kernel)
%description debuginfo-common-%{_target_cpu}
This package is required by %{name}-debuginfo subpackages.
It provides the kernel source files common to all builds.

%if %{with_perf}
%package -n perf
Summary: Performance monitoring for the Linux kernel
Requires: bzip2
%description -n perf
This package contains the perf tool, which enables performance monitoring
of the Linux kernel.

%package -n perf-debuginfo
Summary: Debug information for package perf
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n perf-debuginfo
This package provides debug information for the perf package.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}

%package -n python3-perf
Summary: Python bindings for apps which will manipulate perf events
%description -n python3-perf
The python3-perf package contains a module that permits applications
written in the Python programming language to use the interface
to manipulate perf events.

%package -n python3-perf-debuginfo
Summary: Debug information for package perf python bindings
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n python3-perf-debuginfo
This package provides debug information for the perf python bindings.

# the python_sitearch macro should already be defined from above
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}

%package -n libperf
Summary: The perf library from kernel source
%description -n libperf
This package contains the kernel source perf library.

%package -n libperf-devel
Summary: Developement files for the perf library from kernel source
Requires: libperf = %{version}-%{release}
%description -n libperf-devel
This package includes libraries and header files needed for development
of applications which use perf library from kernel source.

%package -n libperf-debuginfo
Summary: Debug information for package libperf
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n libperf-debuginfo
This package provides debug information for the libperf package.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libdir}/libperf.so.*(\.debug)?|XXX' -o libperf-debuginfo.list}

# with_perf
%endif

%if %{with_tools}
%package -n kernel-tools
Summary: Assortment of tools for the Linux kernel
%ifarch %{cpupowerarchs}
Provides:  cpupowerutils = 1:009-0.6.p1
Obsoletes: cpupowerutils < 1:009-0.6.p1
Provides:  cpufreq-utils = 1:009-0.6.p1
Provides:  cpufrequtils = 1:009-0.6.p1
Obsoletes: cpufreq-utils < 1:009-0.6.p1
Obsoletes: cpufrequtils < 1:009-0.6.p1
Obsoletes: cpuspeed < 1:1.5-16
Requires: kernel-tools-libs = %{version}-%{release}
%endif
%define __requires_exclude ^%{_bindir}/python
%description -n kernel-tools
This package contains the tools/ directory from the kernel source
and the supporting documentation.

%package -n kernel-tools-libs
Summary: Libraries for the kernels-tools
%description -n kernel-tools-libs
This package contains the libraries built from the tools/ directory
from the kernel source.

%package -n kernel-tools-libs-devel
Summary: Assortment of tools for the Linux kernel
Requires: kernel-tools = %{version}-%{release}
%ifarch %{cpupowerarchs}
Provides:  cpupowerutils-devel = 1:009-0.6.p1
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
%endif
Requires: kernel-tools-libs = %{version}-%{release}
Provides: kernel-tools-devel
%description -n kernel-tools-libs-devel
This package contains the development files for the tools/ directory from
the kernel source.

%package -n kernel-tools-debuginfo
Summary: Debug information for package kernel-tools
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
AutoReqProv: no
%description -n kernel-tools-debuginfo
This package provides debug information for package kernel-tools.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}

%package -n rtla
Summary: Real-Time Linux Analysis tools
Requires: libtraceevent
Requires: libtracefs
%description -n rtla
The rtla meta-tool includes a set of commands that aims to analyze
the real-time properties of Linux. Instead of testing Linux as a black box,
rtla leverages kernel tracing capabilities to provide precise information
about the properties and root causes of unexpected results.

%package -n rv
Summary: RV: Runtime Verification
%description -n rv
Runtime Verification (RV) is a lightweight (yet rigorous) method that
complements classical exhaustive verification techniques (such as model
checking and theorem proving) with a more practical approach for
complex systems.
The rv tool is the interface for a collection of monitors that aim
analysing the logical and timing behavior of Linux.

# with_tools
%endif

%if %{with_bpftool}

%define bpftoolversion 7.4.0

%package -n bpftool
Summary: Inspection and simple manipulation of eBPF programs and maps
Version: %{bpftoolversion}
%description -n bpftool
This package contains the bpftool, which allows inspection and simple
manipulation of eBPF programs and maps.

%package -n bpftool-debuginfo
Summary: Debug information for package bpftool
Version: %{bpftoolversion}
Group: Development/Debug
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{specversion}-%{release}
AutoReqProv: no
%description -n bpftool-debuginfo
This package provides debug information for the bpftool package.

%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list}

# Setting "Version:" above overrides the internal {version} macro,
# need to restore it here
%define version %{specversion}

# with_bpftool
%endif

%if %{with_selftests}

%package selftests-internal
Summary: Kernel samples and selftests
Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3, fuse-libs, keyutils
%description selftests-internal
Kernel sample programs and selftests.

# Note that this pattern only works right to match the .build-id
# symlinks because of the trailing nonmatching alternation and
# the leading .*, because of find-debuginfo.sh's buggy handling
# of matching the pattern against the symlinks file.
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}

%define __requires_exclude ^liburandom_read.so.*$

# with_selftests
%endif

%define kernel_gcov_package() \
%package %{?1:%{1}-}gcov\
Summary: gcov graph and source files for coverage data collection.\
%description %{?1:%{1}-}gcov\
%{?1:%{1}-}gcov includes the gcov graph and source files for gcov coverage collection.\
%{nil}

%package -n kernel-abi-stablelists
Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
AutoReqProv: no
%description -n kernel-abi-stablelists
The kABI package contains information pertaining to the Red Hat Enterprise
Linux kernel ABI, including lists of kernel symbols that are needed by
external Linux kernel modules, and a yum plugin to aid enforcement.

%if %{with_kabidw_base}
%package kernel-kabidw-base-internal
Summary: The baseline dataset for kABI verification using DWARF data
Group: System Environment/Kernel
AutoReqProv: no
%description kernel-kabidw-base-internal
The package contains data describing the current ABI of the Red Hat Enterprise
Linux kernel, suitable for the kabi-dw tool.
%endif

#
# This macro creates a kernel-<subpackage>-debuginfo package.
#	%%kernel_debuginfo_package <subpackage>
#
# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
# pae etc.) so the regex filters those kernels appropriately. We also
# have to package several binaries as part of kernel-devel but getting
# unique build-ids is tricky for these userspace binaries. We don't really
# care about debugging those so we just filter those out and remove it.
%define kernel_debuginfo_package() \
%package %{?1:%{1}-}debuginfo\
Summary: Debug information for package %{name}%{?1:-%{1}}\
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
%description %{?1:%{1}-}debuginfo\
This package provides debug information for package %{name}%{?1:-%{1}}.\
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
%{nil}

#
# This macro creates a kernel-<subpackage>-devel package.
#	%%kernel_devel_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_package(m) \
%package %{?1:%{1}-}devel\
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-devel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel)\
AutoReqProv: no\
Requires(pre): findutils\
Requires: findutils\
Requires: perl-interpreter\
Requires: openssl-devel\
Requires: elfutils-libelf-devel\
Requires: bison\
Requires: flex\
Requires: make\
Requires: gcc\
%if %{-m:1}%{!-m:0}\
Requires: kernel-devel-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
%description %{?1:%{1}-}devel\
This package provides kernel headers and makefiles sufficient to build modules\
against the %{?2:%{2} }kernel package.\
%{nil}

#
# This macro creates an empty kernel-<subpackage>-devel-matched package that
# requires both the core and devel packages locked on the same version.
#	%%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
#
%define kernel_devel_matched_package(m) \
%package %{?1:%{1}-}devel-matched\
Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
%description %{?1:%{1}-}devel-matched\
This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
%{nil}

#
# kernel-<variant>-ipaclones-internal package
#
%define kernel_ipaclones_package() \
%package %{?1:%{1}-}ipaclones-internal\
Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
AutoReqProv: no\
%description %{?1:%{1}-}ipaclones-internal\
This package provides *.ipa-clones files.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-internal package.
#	%%kernel_modules_internal_package <subpackage> <pretty-name>
#
%define kernel_modules_internal_package() \
%package %{?1:%{1}-}modules-internal\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-internal\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
%{nil}

%if %{with_realtime}
#
# this macro creates a kernel-<subpackage>-kvm package
# %%kernel_kvm_package <subpackage>
#
%define kernel_kvm_package() \
%package %{?1:%{1}-}kvm\
Summary: KVM modules for package kernel%{?1:-%{1}}\
Group: System Environment/Kernel\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-kvm-%{_target_cpu} = %{version}-%{release}\
AutoReq: no\
%description -n kernel%{?1:-%{1}}-kvm\
This package provides KVM modules for package kernel%{?1:-%{1}}.\
%{nil}
%endif

#
# This macro creates a kernel-<subpackage>-modules-extra package.
#	%%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_extra_package(m) \
%package %{?1:%{1}-}modules-extra\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-extra-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-extra\
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules package.
#	%%kernel_modules_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_package(m) \
%package %{?1:%{1}-}modules\
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-modules = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules\
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-core package.
#	%%kernel_modules_core_package [-m] <subpackage> <pretty-name>
#
%define kernel_modules_core_package(m) \
%package %{?1:%{1}-}modules-core\
Summary: Core kernel modules to match the %{?2:%{2}-}core kernel\
Provides: kernel%{?1:-%{1}}-modules-core-%{_target_cpu} = %{version}-%{release}\
Provides: kernel-modules-core-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel-modules-core = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
%if %{-m:1}%{!-m:0}\
Requires: kernel-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-core\
This package provides essential kernel modules for the %{?2:%{2}-}core kernel package.\
%{nil}

#
# this macro creates a kernel-<subpackage> meta package.
#	%%kernel_meta_package <subpackage>
#
%define kernel_meta_package() \
%package %{1}\
summary: kernel meta-package for the %{1} kernel\
Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{uname_suffix %{1}}\
Requires: kernel-%{1}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
%if "%{1}" == "rt" || "%{1}" == "rt-debug"\
Requires: realtime-setup\
%endif\
Provides: installonlypkg(kernel)\
%description %{1}\
The meta-package for the %{1} kernel\
%{nil}

#
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
#	%%define variant_summary The Linux kernel compiled for <configuration>
#	%%kernel_variant_package [-n <pretty-name>] [-m] [-o] <subpackage>
#
%define kernel_variant_package(n:mo) \
%package %{?1:%{1}-}core\
Summary: %{variant_summary}\
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel)\
%if %{-m:1}%{!-m:0}\
Requires: kernel-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
Requires: kernel-%{?1:%{1}-}-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
%endif\
%{expand:%%kernel_reqprovconf %{?1:%{1}} %{-o:%{-o}}}\
%if %{?1:1} %{!?1:0} \
%{expand:%%kernel_meta_package %{?1:%{1}}}\
%endif\
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_core_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
%if %{-m:0}%{!-m:1}\
%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%if 0%{!?fedora:1}\
%{expand:%%kernel_modules_partner_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%endif\
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
%endif\
%if %{efiuki}\
%if "%{1}" != "rt" && "%{1}" != "rt-debug"\
%package %{?1:%{1}-}uki-virt\
Summary: %{variant_summary} unified kernel image for virtual machines\
Provides: installonlypkg(kernel)\
Provides: kernel-%{?1:%{1}-}uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires(pre): %{kernel_prereq}\
Requires(pre): systemd >= 252-20\
%package %{?1:%{1}-}uki-virt-addons\
Summary: %{variant_summary} unified kernel image addons for virtual machines\
Provides: installonlypkg(kernel)\
Requires: kernel%{?1:-%{1}}-uki-virt = %{version}-%{release}\
Requires(pre): systemd >= 252-20\
%endif\
%endif\
%if "%{1}" == "rt" || "%{1}" == "rt-debug"\
%{expand:%%kernel_kvm_package %{?1:%{1}}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
%endif \
%if %{with_gcov}\
%{expand:%%kernel_gcov_package %{?1:%{1}}}\
%endif\
%{nil}

#
# This macro creates a kernel-<subpackage>-modules-partner package.
#	%%kernel_modules_partner_package <subpackage> <pretty-name>
#
%define kernel_modules_partner_package() \
%package %{?1:%{1}-}modules-partner\
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
Group: System Environment/Kernel\
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}\
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: kernel%{?1:-%{1}}-modules-partner = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
Provides: installonlypkg(kernel-module)\
Provides: kernel%{?1:-%{1}}-modules-partner-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
AutoReq: no\
AutoProv: yes\
%description %{?1:%{1}-}modules-partner\
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat partners usage.\
%{nil}

# Now, each variant package.

%if %{with_pae}
%define variant_summary The Linux kernel compiled for Cortex-A15
%kernel_variant_package lpae
%description lpae-core
This package includes a version of the Linux kernel with support for
Cortex-A15 devices with LPAE and HW virtualisation support
%endif

%if %{with_zfcpdump}
%define variant_summary The Linux kernel compiled for zfcpdump usage
%kernel_variant_package -o zfcpdump
%description zfcpdump-core
The kernel package contains the Linux kernel (vmlinuz) for use by the
zfcpdump infrastructure.
# with_zfcpdump
%endif

%if %{with_arm64_64k}
%define variant_summary The Linux kernel compiled for 64k pagesize usage
%kernel_variant_package 64k
%description 64k-core
The kernel package contains a variant of the ARM64 Linux kernel using
a 64K page size.
%endif

%if %{with_arm64_64k} && %{with_debug}
%define variant_summary The Linux kernel compiled with extra debugging enabled
%if !%{debugbuildsenabled}
%kernel_variant_package -m 64k-debug
%else
%kernel_variant_package 64k-debug
%endif
%description 64k-debug-core
The debug kernel package contains a variant of the ARM64 Linux kernel using
a 64K page size.
This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%endif

%if %{with_realtime}
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
%kernel_variant_package rt
%description rt-core
This package includes a version of the Linux kernel compiled with PREEMPT_RT
(real-time preemption support).
%endif

%if %{with_debug} && %{with_realtime}
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
%kernel_variant_package rt-debug
%description rt-debug-core
This package includes a version of the Linux kernel compiled with PREEMPT_RT
(real-time preemption support) and has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.
%endif

%if !%{debugbuildsenabled}
%kernel_variant_package -m debug
%else
%kernel_variant_package debug
%endif
%description debug-core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system:  memory allocation, process allocation, device
input and output, etc.

This variant of the kernel has numerous debugging options enabled.
It should only be installed when trying to gather additional information
on kernel bugs, as some of these options impact performance noticably.

# And finally the main -core package

%define variant_summary The Linux kernel
%kernel_variant_package
%description core
The kernel package contains the Linux kernel (vmlinuz), the core of any
Linux operating system.  The kernel handles the basic functions
of the operating system: memory allocation, process allocation, device
input and output, etc.

%if %{efiuki}
%description debug-uki-virt
Prebuilt debug unified kernel image for virtual machines.

%description debug-uki-virt-addons
Prebuilt debug unified kernel image addons for virtual machines.

%description uki-virt
Prebuilt default unified kernel image for virtual machines.

%description uki-virt-addons
Prebuilt default unified kernel image addons for virtual machines.
%endif

%if %{with_ipaclones}
%kernel_ipaclones_package
%endif

%prep
# do a few sanity-checks for --with *only builds
%if %{with_baseonly}
%if !%{with_up}
echo "Cannot build --with baseonly, up build is disabled"
exit 1
%endif
%endif

# more sanity checking; do it quietly
if [ "%{patches}" != "%%{patches}" ] ; then
  for patch in %{patches} ; do
    if [ ! -f $patch ] ; then
      echo "ERROR: Patch  ${patch##/*/}  listed in specfile but is missing"
      exit 1
    fi
  done
fi 2>/dev/null

patch_command='git apply'
ApplyPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
  if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
    if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
      echo "ERROR: Patch  $patch  not listed as a source patch in specfile"
      exit 1
    fi
  fi 2>/dev/null
  case "$patch" in
  *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.gz)  gunzip  < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *.xz)  unxz    < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
  *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
  esac
}

# don't apply patch if it's empty
ApplyOptionalPatch()
{
  local patch=$1
  shift
  if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
    exit 1
  fi
  local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
  if [ "$C" -gt 9 ]; then
    ApplyPatch $patch ${1+"$@"}
  fi
}

%setup -q -n kernel-%{tarfile_release} -c
mv linux-%{tarfile_release} linux-%{KVERREL}

cd linux-%{KVERREL}
cp -a %{SOURCE1} .

%if !%{nopatches}

ApplyOptionalPatch patch-%{patchversion}-redhat.patch
%endif

ApplyOptionalPatch linux-kernel-test.patch

# END OF PATCH APPLICATIONS

# Any further pre-build tree manipulations happen here.

chmod +x scripts/checkpatch.pl
mv COPYING COPYING-%{version}-%{release}

# This Prevents scripts/setlocalversion from mucking with our version numbers.
touch .scmversion

# Mangle /usr/bin/python shebangs to /usr/bin/python3
# Mangle all Python shebangs to be Python 3 explicitly
# -p preserves timestamps
# -n prevents creating ~backup files
# -i specifies the interpreter for the shebang
# This fixes errors such as
# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
# We patch all sources below for which we got a report/error.
pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \
	tools/kvm/kvm_stat/kvm_stat \
	scripts/show_delta \
	scripts/diffconfig \
	scripts/bloat-o-meter \
	scripts/jobserver-exec \
	tools \
	Documentation \
	scripts/clang-tools

# only deal with configs if we are going to build for the arch
%ifnarch %nobuildarches

if [ -L configs ]; then
	rm -f configs
fi
mkdir configs
cd configs

# Drop some necessary files from the source dir into the buildroot
cp $RPM_SOURCE_DIR/kernel-*.config .
cp %{SOURCE80} .
# merge.pl
cp %{SOURCE3000} .
# kernel-local
cp %{SOURCE3001} .
FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}

# Merge in any user-provided local config option changes
%ifnarch %nobuildarches
for i in %{all_arch_configs}
do
  mv $i $i.tmp
  ./merge.pl %{SOURCE3001} $i.tmp > $i
%if %{with_gcov}
  echo "Merging with gcov options"
  cat %{SOURCE75}
  mv $i $i.tmp
  ./merge.pl %{SOURCE75} $i.tmp > $i
%endif
  rm $i.tmp
done
%endif

%if %{with clang_lto}
for i in *aarch64*.config *x86_64*.config; do
  sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
  sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
done
%endif

# Add DUP and kpatch certificates to system trusted keys for RHEL
%if 0%{?rhel}
%if %{signkernel}%{signmodules}
openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
openssl x509 -inform der -in %{SOURCE102} -out rhelimaca1.pem
openssl x509 -inform der -in %{SOURCE105} -out nvidiagpuoot001.pem
cat rheldup3.pem rhelkpatch1.pem rhelimaca1.pem nvidiagpuoot001.pem > ../certs/rhel.pem
%if %{signkernel}
%ifarch s390x ppc64le
openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
cat secureboot.pem >> ../certs/rhel.pem
%endif
%endif
for i in *.config; do
  sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
done
%endif
%endif

# Adjust FIPS module name for RHEL
%if 0%{?rhel}
for i in *.config; do
  sed -i 's/CONFIG_CRYPTO_FIPS_NAME=.*/CONFIG_CRYPTO_FIPS_NAME="Red Hat Enterprise Linux %{rhel} - Kernel Cryptographic API"/' $i
done
%endif

cp %{SOURCE81} .
OPTS=""
%if %{with_configchecks}
	OPTS="$OPTS -w -n -c"
%endif
%if %{with clang_lto}
for opt in %{clang_make_opts}; do
  OPTS="$OPTS -m $opt"
done
%endif
RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}

cp %{SOURCE82} .
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}

# We may want to override files from the primary target in case of building
# against a flavour of it (eg. centos not rhel), thus override it here if
# necessary
if [ "%{primary_target}" == "rhel" ]; then
%if 0%{?centos}
  echo "Updating scripts/sources to centos version"
  RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
%else
  echo "Not updating scripts/sources to centos version"
%endif
fi

# end of kernel config
%endif

cd ..
# # End of Configs stuff

# get rid of unwanted files resulting from patch fuzz
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null

# remove unnecessary SCM files
find . -name .gitignore -delete >/dev/null

cd ..

###
### build
###
%build

rm -rf %{buildroot_unstripped} || true
mkdir -p %{buildroot_unstripped}

%if %{with_sparse}
%define sparse_mflags	C=1
%endif

cp_vmlinux()
{
  eu-strip --remove-comment -o "$2" "$1"
}

# Note we need to disable these flags for cross builds because the flags
# from redhat-rpm-config assume that host == target so target arch
# flags cause issues with the host compiler.
%if !%{with_cross}
%define build_hostcflags  %{?build_cflags}
%define build_hostldflags %{?build_ldflags}
%endif

%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"

InitBuildVars() {
    # Initialize the kernel .config file and create some variables that are
    # needed for the actual build process.

    Variant=$1

    # Pick the right kernel config file
    Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
    DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}

    KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}

    # make sure EXTRAVERSION says what we want it to say
    # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
    ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
    perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile

    # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
    # if we are post rc1 this should match anyway so this won't matter
    perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile

    %{make} %{?_smp_mflags} mrproper
    cp configs/$Config .config

    %if %{signkernel}%{signmodules}
    cp configs/x509.genkey certs/.
    %endif

    Arch=`head -1 .config | cut -b 3-`
    echo USING ARCH=$Arch

    KCFLAGS="%{?kcflags}"

    # add kpatch flags for base kernel
    if [ "$Variant" == "" ]; then
        KCFLAGS="$KCFLAGS %{?kpatch_kcflags}"
    fi
}

BuildKernel() {
    MakeTarget=$1
    KernelImage=$2
    DoVDSO=$3
    Variant=$4
    InstallName=${5:-vmlinuz}

    DoModules=1
    if [ "$Variant" = "zfcpdump" ]; then
	    DoModules=0
    fi

    # When the bootable image is just the ELF kernel, strip it.
    # We already copy the unstripped file into the debuginfo package.
    if [ "$KernelImage" = vmlinux ]; then
      CopyKernel=cp_vmlinux
    else
      CopyKernel=cp
    fi

%if %{with_gcov}
    # Make build directory unique for each variant, so that gcno symlinks
    # are also unique for each variant.
    if [ -n "$Variant" ]; then
        ln -s $(pwd) ../linux-%{KVERREL}-${Variant}
    fi
    echo "GCOV - continuing build in: $(pwd)"
    pushd ../linux-%{KVERREL}${Variant:+-${Variant}}
    pwd > ../kernel${Variant:+-${Variant}}-gcov.list
%endif

    InitBuildVars $Variant

    echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...

    %{make} ARCH=$Arch olddefconfig >/dev/null

    # This ensures build-ids are unique to allow parallel debuginfo
    perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
    %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
    if [ $DoModules -eq 1 ]; then
	%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
    fi

    mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
%if %{with_debuginfo}
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
%endif

%ifarch %{arm} aarch64
    %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
    %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
    cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
    find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
%endif

    # Start installing the results
    install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
    install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
    install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
    install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map

    # We estimate the size of the initramfs because rpm needs to take this size
    # into consideration when performing disk space calculations. (See bz #530778)
    dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20

    if [ -f arch/$Arch/boot/zImage.stub ]; then
      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
      cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
    fi

    %if %{signkernel}
    if [ "$KernelImage" = vmlinux ]; then
        # We can't strip and sign $KernelImage in place, because
        # we need to preserve original vmlinux for debuginfo.
        # Use a copy for signing.
        $CopyKernel $KernelImage $KernelImage.tosign
        KernelImage=$KernelImage.tosign
        CopyKernel=cp
    fi

    # Sign the image if we're using EFI
    # aarch64 kernels are gziped EFI images
    KernelExtension=${KernelImage##*.}
    if [ "$KernelExtension" == "gz" ]; then
        SignImage=${KernelImage%.*}
    else
        SignImage=$KernelImage
    fi

    %ifarch x86_64 aarch64
    %pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
    %endif
    %ifarch s390x ppc64le
    if [ -x /usr/bin/rpm-sign ]; then
	rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
    elif [ "$DoModules" == "1" -a "%{signmodules}" == "1" ]; then
	chmod +x scripts/sign-file
	./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
    else
	mv $SignImage vmlinuz.signed
    fi
    %endif

    if [ ! -s vmlinuz.signed ]; then
        echo "pesigning failed"
        exit 1
    fi
    mv vmlinuz.signed $SignImage
    if [ "$KernelExtension" == "gz" ]; then
        gzip -f9 $SignImage
    fi
    # signkernel
    %endif

    $CopyKernel $KernelImage \
                $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName

    # hmac sign the kernel for FIPS
    echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
    ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
    (cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
    cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac

    if [ $DoModules -eq 1 ]; then
	# Override $(mod-fw) because we don't want it to install any firmware
	# we'll get it from the linux-firmware package and we don't want conflicts
	%{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
    fi

%if %{with_gcov}
    # install gcov-needed files to $BUILDROOT/$BUILD/...:
    #   gcov_info->filename is absolute path
    #   gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
    #   sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
    find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
%endif

    # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
    echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
    if [ $DoVDSO -ne 0 ]; then
        %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
        if [ -s ldconfig-kernel.conf ]; then
             install -D -m 444 ldconfig-kernel.conf \
                $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
	     echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
        fi

        rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
    fi

    # And save the headers/makefiles etc for building modules against
    #
    # This all looks scary, but the end result is supposed to be:
    # * all arch relevant include/ files
    # * all Makefile/Kconfig files
    # * all script/ files

    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
    # dirs for additional modules per module-init-tools, kbuild/modules.txt
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
    # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
    # testing so just delete
    find . -name *.h.s -delete
    # first copy everything
    cp --parents `find  -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ ! -e Module.symvers ]; then
        touch Module.symvers
    fi
    cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    if [ -s Module.markers ]; then
      cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi

    # create the kABI metadata for use in packaging
    # NOTENOTE: the name symvers is used by the rpm backend
    # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
    # NOTENOTE: script which dynamically adds exported kernel symbol
    # NOTENOTE: checksums to the rpm metadata provides list.
    # NOTENOTE: if you change the symvers name, update the backend too
    echo "**** GENERATING kernel ABI metadata ****"
    gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
    cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz

%if %{with_kabichk}
    echo "**** kABI checking is enabled in kernel SPEC file. ****"
    chmod 0755 $RPM_SOURCE_DIR/check-kabi
    if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
        cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
        $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
        # for now, don't keep it around.
        rm $RPM_BUILD_ROOT/Module.kabi
    else
        echo "**** NOTE: Cannot find reference Module.kabi file. ****"
    fi
%endif

%if %{with_kabidupchk}
    echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
    if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
        cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
        $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
        # for now, don't keep it around.
        rm $RPM_BUILD_ROOT/Module.kabi
    else
        echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
    fi
%endif

%if %{with_kabidw_base}
    # Don't build kabi base for debug kernels
    if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
        tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf

        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
        tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists

        echo "**** GENERATING DWARF-based kABI baseline dataset ****"
        chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
        $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
            "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
            "$(pwd)" \
            "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :

        rm -rf $RPM_BUILD_ROOT/kabi-dwarf
    fi
%endif

%if %{with_kabidwchk}
    if [ "$Variant" != "zfcpdump" ]; then
        mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
        tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
        if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
            mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
            tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists

            echo "**** GENERATING DWARF-based kABI dataset ****"
            chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
            $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
                "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
                "$(pwd)" \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :

            echo "**** kABI DWARF-based comparison report ****"
            $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
                "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
            echo "**** End of kABI DWARF-based comparison report ****"
        else
            echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
        fi

        rm -rf $RPM_BUILD_ROOT/kabi-dwarf
    fi
%endif

    # then drop all but the needed Makefiles/Kconfig files
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
    cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
    rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py

%ifarch s390x
    # CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline/expoline.o
    # which is needed during external module build.
    if [ -f arch/s390/lib/expoline/expoline.o ]; then
      cp -a --parents arch/s390/lib/expoline/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi
%endif

    # Files for 'make scripts' to succeed with kernel-devel.
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
    cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
    cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    # Files for 'make prepare' to succeed with kernel-devel.
    cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    cp -a --parents tools/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

    if [ -f tools/objtool/objtool ]; then
      cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
    fi
    if [ -f tools/objtool/fixdep ]; then
      cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
    fi
    if [ -d arch/$Arch/scripts ]; then
      cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
    fi
    if [ -f arch/$Arch/*lds ]; then
      cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
    fi
    if [ -f arch/%{asmarch}/kernel/module.lds ]; then
      cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
%ifarch ppc64le
    cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
    if [ -d arch/%{asmarch}/include ]; then
      cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    if [ -d tools/arch/%{asmarch}/include ]; then
      cp -a --parents tools/arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    fi
%ifarch aarch64
    # arch/arm64/include/asm/xen references arch/arm
    cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    # arch/arm64/include/asm/opcodes.h references arch/arm
    cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
%endif
    # include the machine specific headers for ARM variants, if available.
%ifarch %{arm}
    if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
      cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    fi
    # include a few files for 'make prepare'
    cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

%endif
    cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
    # Cross-reference from include/perf/events/sof.h
    cp -a sound/soc/sof/sof-audio.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/sound/soc/sof
%ifarch i686 x86_64
    # files for 'make prepare' to succeed with kernel-devel
    cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

    cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
    cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/

    cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
    cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

%endif
    # Clean up intermediate tools files
    find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +

    # Make sure the Makefile, version.h, and auto.conf have a matching
    # timestamp so that external modules can be built
    touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
        $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
        $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf

%if %{with_debuginfo}
    eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
    cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id

    #
    # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
    #
    mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
    cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
    if [ -n "%{vmlinux_decompressor}" ]; then
	    eu-readelf -n  %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
	    # Without build-id the build will fail. But for s390 the build-id
	    # wasn't added before 5.11. In case it is missing prefer not
	    # packaging the debuginfo over a build failure.
	    if [ -s vmlinux.decompressor.id ]; then
		    cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
		    cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
	    fi
    fi
%endif

    find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames

    # mark modules executable so that strip-to-file can strip them
    xargs --no-run-if-empty chmod u+x < modnames

    # Generate a list of modules for block and networking.

    grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
    sed -n 's,^.*/\([^/]*\.ko\):  *U \(.*\)$,\1 \2,p' > drivers.undef

    collect_modules_list()
    {
      sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
        LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
      if [ ! -z "$3" ]; then
        sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
      fi
    }

    collect_modules_list networking \
      'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
    collect_modules_list block \
      'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
    collect_modules_list drm \
      'drm_open|drm_init'
    collect_modules_list modesetting \
      'drm_crtc_init'

    # detect missing or incorrect license tags
    ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
        grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1

    remove_depmod_files()
    {
        # remove files that will be auto generated by depmod at rpm -i time
        pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
            # in case below list needs to be extended, remember to add a
            # matching ghost entry in the files section as well
            rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
                  modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
        popd
    }

    remove_depmod_files

    # Identify modules in the kernel-modules-extras package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
    # Identify modules in the kernel-modules-extras package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
%if 0%{!?fedora:1}
    # Identify modules in the kernel-modules-partner package
    %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE85} partner
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        # Identify modules in the kernel-rt-kvm package
        %{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE86} kvm
    fi

    #
    # Generate the kernel-core and kernel-modules files lists
    #

    # Copy the System.map file for depmod to use, and create a backup of the
    # full module tree so we can restore it after we're done filtering
    cp System.map $RPM_BUILD_ROOT/.
    cp configs/filter-*.sh $RPM_BUILD_ROOT/.
    pushd $RPM_BUILD_ROOT
    mkdir restore
    cp -r lib/modules/$KernelVer/* restore/.

    # don't include anything going into kernel-modules-extra in the file lists
    xargs rm -rf < mod-extra.list
    # don't include anything going int kernel-modules-internal in the file lists
    xargs rm -rf < mod-internal.list
%if 0%{!?fedora:1}
    # don't include anything going int kernel-modules-partner in the file lists
    xargs rm -rf < mod-partner.list
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        # don't include anything going into kernel-rt-kvm in the file lists
        xargs rm -rf < mod-kvm.list
    fi

    if [ $DoModules -eq 1 ]; then
	# Find all the module files and filter them out into the core and
	# modules lists.  This actually removes anything going into -modules
	# from the dir.
	find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
	./filter-modules.sh modules.list %{_target_cpu}
	rm filter-*.sh

	# Run depmod on the resulting module tree and make sure it isn't broken
	depmod -b . -aeF ./System.map $KernelVer &> depmod.out
	if [ -s depmod.out ]; then
	    echo "Depmod failure"
	    cat depmod.out
	    exit 1
	else
	    rm depmod.out
	fi
    else
	# Ensure important files/directories exist to let the packaging succeed
	echo '%%defattr(-,-,-)' > modules.list
	echo '%%defattr(-,-,-)' > k-d.list
	mkdir -p lib/modules/$KernelVer/kernel
	# Add files usually created by make modules, needed to prevent errors
	# thrown by depmod during package installation
	touch lib/modules/$KernelVer/modules.order
	touch lib/modules/$KernelVer/modules.builtin
    fi

%if %{efiuki}
    if [ "$Variant" != "rt" ] && [ "$Variant" != "rt-debug" ]; then
        popd

        # RHEL/CentOS specific .SBAT entries
%if 0%{?centos}
        SBATsuffix="centos"
%else
        SBATsuffix="rhel"
%endif
        SBAT=$(cat <<- EOF
	linux,1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
	linux.$SBATsuffix,1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
	kernel-uki-virt.$SBATsuffix,1,Red Hat,kernel-uki-virt,$KernelVer,mailto:secalert@redhat.com
	EOF
	)

        KernelUnifiedImageDir="$RPM_BUILD_ROOT/lib/modules/$KernelVer"
        KernelUnifiedImage="$KernelUnifiedImageDir/$InstallName-virt.efi"
    
        mkdir -p $KernelUnifiedImageDir
    
        dracut --conf=%{SOURCE150} \
               --confdir=$(mktemp -d) \
               --verbose \
               --kver "$KernelVer" \
               --kmoddir "$RPM_BUILD_ROOT/lib/modules/$KernelVer/" \
               --logfile=$(mktemp) \
               --uefi \
               --sbat "$SBAT" \
               --kernel-image $(realpath $KernelImage) \
               --kernel-cmdline 'console=tty0 console=ttyS0' \
    	   $KernelUnifiedImage

        KernelAddonsDirOut="$KernelUnifiedImage.extra.d"
        mkdir -p $KernelAddonsDirOut
        python3 %{SOURCE151} %{SOURCE152} $KernelAddonsDirOut virt %{primary_target} %{_target_cpu}

%if %{signkernel}

%if 0%{?centos}
	UKI_secureboot_name=centossecureboot204
%else
	UKI_secureboot_name=redhatsecureboot504
%endif
	UKI_secureboot_cert=%{_datadir}/pki/sb-certs/secureboot-uki-virt-%{_arch}.cer

        %pesign -s -i $KernelUnifiedImage -o $KernelUnifiedImage.signed -a %{secureboot_ca_0} -c $UKI_secureboot_cert -n $UKI_secureboot_name
        if [ ! -s $KernelUnifiedImage.signed ]; then
          echo "pesigning failed"
          exit 1
        fi
        mv $KernelUnifiedImage.signed $KernelUnifiedImage

      for addon in "$KernelAddonsDirOut"/*; do
        %pesign -s -i $addon -o $addon.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
        rm -f $addon
        mv $addon.signed $addon
      done

# signkernel
%endif

      # hmac sign the UKI for FIPS
      KernelUnifiedImageHMAC="$KernelUnifiedImageDir/.$InstallName-virt.efi.hmac"
      echo "hmac sign the UKI for FIPS"
      echo "Creating hmac file: $KernelUnifiedImageHMAC"
      (cd $KernelUnifiedImageDir && sha512hmac $InstallName-virt.efi) > $KernelUnifiedImageHMAC;

        pushd $RPM_BUILD_ROOT

    # Variant != rt && Variant != rt-debug
    fi
# efiuki
%endif

    remove_depmod_files

    # Go back and find all of the various directories in the tree.  We use this
    # for the dir lists in kernel-core
    find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list

    # Cleanup
    rm System.map
    # Just "cp -r" can be very slow: here, it rewrites _existing files_
    # with open(O_TRUNC). Many filesystems synchronously wait for metadata
    # update for such file rewrites (seen in strace as final close syscall
    # taking a long time). On a rotational disk, cp was observed to take
    # more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
    # With --remove-destination, we avoid this, and copying
    # (with enough RAM to cache it) takes 5 seconds:
    cp -r --remove-destination restore/* lib/modules/$KernelVer/.
    rm -rf restore
    popd

    # Make sure the files lists start with absolute paths or rpmbuild fails.
    # Also add in the dir entries
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
    sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-modules-core.list
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-modules-core.list
    sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list

    # Cleanup
    rm -f $RPM_BUILD_ROOT/k-d.list
    rm -f $RPM_BUILD_ROOT/modules.list
    rm -f $RPM_BUILD_ROOT/module-dirs.list
    rm -f $RPM_BUILD_ROOT/mod-extra.list
    rm -f $RPM_BUILD_ROOT/mod-internal.list
%if 0%{!?fedora:1}
    rm -f $RPM_BUILD_ROOT/mod-partner.list
%endif
    if [ "$Variant" = "rt" ] || [ "$Variant" = "rt-debug" ]; then
        rm -f $RPM_BUILD_ROOT/mod-kvm.list
    fi

%if %{with_cross}
    make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build M=scripts clean
    make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/bpf/resolve_btfids clean
    sed -i 's/REBUILD_SCRIPTS_FOR_CROSS:=0/REBUILD_SCRIPTS_FOR_CROSS:=1/' $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile
%endif

    # Move the devel headers out of the root file system
    mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
    mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir

    # This is going to create a broken link during the build, but we don't use
    # it after this point.  We need the link to actually point to something
    # when kernel-devel is installed, and a relative link doesn't work across
    # the F17 UsrMove feature.
    ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build

%ifnarch armv7hl
    # Generate vmlinux.h and put it to kernel-devel path
    # zfcpdump build does not have btf anymore
    if [ "$Variant" != "zfcpdump" ]; then
        # Build the bootstrap bpftool to generate vmlinux.h
        make -C tools/bpf/bpftool bootstrap
        tools/bpf/bpftool/bootstrap/bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
    fi
%endif

    # prune junk from kernel-devel
    find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete

    # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
    mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
%if %{signkernel}
    install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
    %ifarch s390x ppc64le
    if [ -x /usr/bin/rpm-sign ]; then
        install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
    fi
    %endif
%endif

%if 0%{?rhel}
    # Red Hat IMA code-signing cert, which is used to authenticate package files
    install -m 0644 %{ima_signing_cert} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{ima_cert_name}
%endif

%if %{signmodules}
    if [ $DoModules -eq 1 ]; then
        # Save the signing keys so we can sign the modules in __modsign_install_post
        cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
        cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
        %ifarch s390x ppc64le
        if [ ! -x /usr/bin/rpm-sign ]; then
            install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
            openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
            chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
        fi
        %endif
    fi
%endif

%if %{with_ipaclones}
    MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p')
    if [ -z "$MAXPROCS" ]; then
        MAXPROCS=1
    fi
    if [ "$Variant" == "" ]; then
        mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones
        find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}"
    fi
%endif

%if %{with_gcov}
    popd
%endif
}

###
# DO it...
###

# prepare directories
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/boot
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}

cd linux-%{KVERREL}


%if %{with_debug}
BuildKernel %make_target %kernel_image %{_use_vdso} debug
%if %{with_arm64_64k}
BuildKernel %make_target %kernel_image %{_use_vdso} 64k-debug
%endif
%if %{with_realtime}
BuildKernel %make_target %kernel_image %{_use_vdso} rt-debug
%endif
%endif

%if %{with_zfcpdump}
BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
%endif

%if %{with_arm64_64k}
BuildKernel %make_target %kernel_image %{_use_vdso} 64k
%endif

%if %{with_pae}
BuildKernel %make_target %kernel_image %{use_vdso} lpae
%endif

%if %{with_realtime}
BuildKernel %make_target %kernel_image %{use_vdso} rt
%endif

%if %{with_up}
BuildKernel %make_target %kernel_image %{_use_vdso}
%endif

%ifnarch noarch i686
%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up} && !%{with_arm64_64k} && !%{with_realtime}
# If only building the user space tools, then initialize the build environment
# and some variables so that the various userspace tools can be built.
InitBuildVars
%endif
%endif

%ifarch aarch64
%global perf_build_extra_opts CORESIGHT=1
%endif
%global perf_make \
  %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags} -Wl,-E" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
%if %{with_perf}
# perf
# make sure check-headers.sh is executable
chmod +x tools/perf/check-headers.sh
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
# libperf
make -C tools/lib/perf V=1
%endif

%global tools_make \
  CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{make} %{?make_opts}

%if %{with_tools}
%ifarch %{cpupowerarchs}
# cpupower
# make sure version-gen.sh is executable.
chmod +x tools/power/cpupower/utils/version-gen.sh
%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
%ifarch x86_64
    pushd tools/power/cpupower/debug/x86_64
    %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
    popd
%endif
%ifarch x86_64
   pushd tools/power/x86/x86_energy_perf_policy/
   %{tools_make}
   popd
   pushd tools/power/x86/turbostat
   %{tools_make}
   popd
   pushd tools/power/x86/intel-speed-select
   %{tools_make}
   popd
   pushd tools/arch/x86/intel_sdsi
   %{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
   popd
%endif
%endif
pushd tools/thermal/tmon/
%{tools_make}
popd
pushd tools/iio/
%{tools_make}
popd
pushd tools/gpio/
%{tools_make}
popd
# build VM tools
pushd tools/mm/
%{tools_make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" slabinfo page_owner_sort
popd
pushd tools/verification/rv/
%{tools_make}
popd
pushd tools/tracing/rtla
%{tools_make}
popd
%endif

if [ -f $DevelDir/vmlinux.h ]; then
  RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi
echo "${RPM_VMLINUX_H}" > ../vmlinux_h_path

%if %{with_bpftool}
%global bpftool_make \
  %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1
pushd tools/bpf/bpftool
%{bpftool_make}
popd
%else
echo "bpftools disabled ... disabling selftests"
%endif

%if %{with_selftests}
# Unfortunately, samples/bpf/Makefile expects that the headers are installed
# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
# but there's no way to tell the Makefile to take them from there.
%{make} %{?_smp_mflags} headers_install

# If we re building only tools without kernel, we need to generate config
# headers and prepare tree for modules building. The modules_prepare target
# will cover both.
if [ ! -f include/generated/autoconf.h ]; then
   %{make} %{?_smp_mflags} modules_prepare
fi

%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ VMLINUX_H="${RPM_VMLINUX_H}" || true

# Prevent bpf selftests to build bpftool repeatedly:
export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool

pushd tools/testing/selftests
# We need to install here because we need to call make with ARCH set which
# doesn't seem possible to do in the install section.
%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf cgroup mm livepatch net net/forwarding net/mptcp netfilter tc-testing memfd drivers/net/bonding iommu cachestat" SKIP_TARGETS="" FORCE_TARGETS=1 INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" DEFAULT_INSTALL_HDR_PATH=0 install

# 'make install' for bpf is broken and upstream refuses to fix it.
# Install the needed files manually.
for dir in bpf bpf/no_alu32 bpf/cpuv4 bpf/progs; do
	# In ARK, the rpm build continues even if some of the selftests
	# cannot be built. It's not always possible to build selftests,
	# as upstream sometimes dependens on too new llvm version or has
	# other issues. If something did not get built, just skip it.
	test -d $dir || continue
	mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
	find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
		-name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
		-name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^  Machine:.*BPF"' \; \) -print0 | \
	xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
done
ln -sr  %{buildroot}%{_libexecdir}/kselftests/bpf/bpftool %{buildroot}%{_libexecdir}/kselftests/bpf/no_alu32/bpftool

# CKI clang does not support cpuv4 so it skips this variant
ln -sr  %{buildroot}%{_libexecdir}/kselftests/bpf/bpftool %{buildroot}%{_libexecdir}/kselftests/bpf/cpuv4/bpftool || echo "selftests/bpf: no cpuv4 variant"

%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs"
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs-no_alu32"
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs-cpuv4"
popd
export -n BPFTOOL
%endif

%if %{with_doc}
# Make the HTML pages.
%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}

# sometimes non-world-readable files sneak into the kernel source tree
chmod -R a=rX Documentation
find Documentation -type d | xargs chmod u+w
%endif

# In the modsign case, we do 3 things.  1) We check the "variant" and hard
# code the value in the following invocations.  This is somewhat sub-optimal
# but we're doing this inside of an RPM macro and it isn't as easy as it
# could be because of that.  2) We restore the .tmp_versions/ directory from
# the one we saved off in BuildKernel above.  This is to make sure we're
# signing the modules we actually built/installed in that variant.  3) We
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
#
# We have to do all of those things _after_ find-debuginfo runs, otherwise
# that will strip the signature off of the modules.
#
# Don't sign modules for the zfcpdump variant as it is monolithic.

%define __modsign_install_post \
  if [ "%{signmodules}" -eq "1" ]; then \
    if [ "%{with_pae}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
    fi \
    if [ "%{with_realtime}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+rt certs/signing_key.x509.sign+rt $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt/ \
    fi \
    if [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
    fi \
    if [ "%{with_arm64_64k}" -ne "0" ]; then \
       %{modsign_cmd} certs/signing_key.pem.sign+64k certs/signing_key.x509.sign+64k $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k/ \
    fi \
    if [ "%{with_arm64_64k}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+64k-debug certs/signing_key.x509.sign+64k-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k-debug/ \
    fi \
    if [ "%{with_realtime}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
         %{modsign_cmd} certs/signing_key.pem.sign+rt-debug certs/signing_key.x509.sign+rt-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt-debug/ \
    fi \
    if [ "%{with_up}" -ne "0" ]; then \
      %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
    fi \
  fi \
  if [ "%{zipmodules}" -eq "1" ]; then \
    echo "Compressing kernel modules ..." \
    find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -n 16 -P${RPM_BUILD_NCPUS} -r %compression %compression_flags; \
  fi \
%{nil}

###
### Special hacks for debuginfo subpackages.
###

# This macro is used by %%install, so we must redefine it before that.
%define debug_package %{nil}

%if %{with_debuginfo}

%ifnarch noarch
%global __debug_package 1
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
%endif

%endif

# We don't want to package debuginfo for self-tests and samples but
# we have to delete them to avoid an error messages about unpackaged
# files.
# Delete the debuginfo for kernel-devel files
%define __remove_unwanted_dbginfo_install_post \
  if [ "%{with_selftests}" -ne "0" ]; then \
    rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
    rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
  fi \
  rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
%{nil}

#
# Disgusting hack alert! We need to ensure we sign modules *after* all
# invocations of strip occur, which is in __debug_install_post if
# find-debuginfo.sh runs, and __os_install_post if not.
#
%define __spec_install_post \
  %{?__debug_package:%{__debug_install_post}}\
  %{__arch_install_post}\
  %{__os_install_post}\
  %{__remove_unwanted_dbginfo_install_post}\
  %{__restore_unstripped_root_post}\
  %{__modsign_install_post}

###
### install
###

%install

cd linux-%{KVERREL}

# re-define RPM_VMLINUX_H, because it doesn't carry over from %build
RPM_VMLINUX_H="$(cat ../vmlinux_h_path)"

%if %{with_doc}
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}

# copy the source over
mkdir -p $docdir
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
cat %{SOURCE2} | xz > $docdir/kernel.changelog.xz
chmod 0644 $docdir/kernel.changelog.xz

# with_doc
%endif

# We have to do the headers install before the tools install because the
# kernel headers_install will remove any header files in /usr/include that
# it doesn't install itself.

%if %{with_headers}
# Install kernel headers
%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install

find $RPM_BUILD_ROOT/usr/include \
     \( -name .install -o -name .check -o \
        -name ..install.cmd -o -name ..check.cmd \) -delete

%endif

%if %{with_cross_headers}
%if 0%{?fedora}
HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
%else
HDR_ARCH_LIST='arm64 powerpc s390 x86'
%endif
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers

for arch in $HDR_ARCH_LIST; do
	mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
	%{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
done

find $RPM_BUILD_ROOT/usr/tmp-headers \
     \( -name .install -o -name .check -o \
        -name ..install.cmd -o -name ..check.cmd \) -delete

# Copy all the architectures we care about to their respective asm directories
for arch in $HDR_ARCH_LIST ; do
	mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
	mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
done

rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
%endif

%if %{with_kernel_abi_stablelists}
# kabi directory
INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
mkdir -p $INSTALL_KABI_PATH

# install kabi releases directories
tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
# with_kernel_abi_stablelists
%endif

%if %{with_perf}
# perf tool binary and supporting scripts/binaries
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
# remove the 'trace' symlink.
rm -f %{buildroot}%{_bindir}/trace

# For both of the below, yes, this should be using a macro but right now
# it's hard coded and we don't actually want it anyway right now.
# Whoever wants examples can fix it up!

# remove examples
rm -rf %{buildroot}/usr/lib/perf/examples
rm -rf %{buildroot}/usr/lib/perf/include

# python-perf extension
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext

# perf man pages (note: implicit rpm magic compresses them later)
mkdir -p %{buildroot}/%{_mandir}/man1
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man

# remove any tracevent files, eg. its plugins still gets built and installed,
# even if we build against system's libtracevent during perf build (by setting
# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
# ship with libtraceevent package.
rm -rf %{buildroot}%{_libdir}/traceevent

# libperf
make -C tools/lib/perf DESTDIR=%{buildroot} prefix=%{_prefix} libdir=%{_libdir} V=1 install
rm -f %{buildroot}%{_libdir}/libperf.a
%endif

%if %{with_tools}
%ifarch %{cpupowerarchs}
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
rm -f %{buildroot}%{_libdir}/*.{a,la}
%find_lang cpupower
mv cpupower.lang ../
%ifarch x86_64
    pushd tools/power/cpupower/debug/x86_64
    install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
    install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
    popd
%endif
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
%endif
%ifarch x86_64
   mkdir -p %{buildroot}%{_mandir}/man8
   pushd tools/power/x86/x86_energy_perf_policy
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/power/x86/turbostat
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/power/x86/intel-speed-select
   %{tools_make} DESTDIR=%{buildroot} install
   popd
   pushd tools/arch/x86/intel_sdsi
   %{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
   popd
%endif
pushd tools/thermal/tmon
%{tools_make} INSTALL_ROOT=%{buildroot} install
popd
pushd tools/iio
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/gpio
%{tools_make} DESTDIR=%{buildroot} install
popd
install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
pushd tools/kvm/kvm_stat
%{__make} INSTALL_ROOT=%{buildroot} install-tools
%{__make} INSTALL_ROOT=%{buildroot} install-man
install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
popd
# install VM tools
pushd tools/mm/
install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
popd
pushd tools/verification/rv/
%{tools_make} DESTDIR=%{buildroot} install
popd
pushd tools/tracing/rtla/
%{tools_make} DESTDIR=%{buildroot} install
rm -f %{buildroot}%{_bindir}/hwnoise
rm -f %{buildroot}%{_bindir}/osnoise
rm -f %{buildroot}%{_bindir}/timerlat
(cd %{buildroot}

        ln -sf rtla ./%{_bindir}/hwnoise
        ln -sf rtla ./%{_bindir}/osnoise
        ln -sf rtla ./%{_bindir}/timerlat
)
popd
%endif

if [ -f $DevelDir/vmlinux.h ]; then
  RPM_VMLINUX_H=$DevelDir/vmlinux.h
fi

%if %{with_bpftool}
pushd tools/bpf/bpftool
%{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install
popd
%endif

%if %{with_selftests}
pushd samples
install -d %{buildroot}%{_libexecdir}/ksamples
# install bpf samples
pushd bpf
install -d %{buildroot}%{_libexecdir}/ksamples/bpf
find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
# kernel tree. Just remove it.
rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
popd
# install pktgen samples
pushd pktgen
install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
popd
popd
# install mm selftests
pushd tools/testing/selftests/mm
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
popd
# install cgroup selftests
pushd tools/testing/selftests/cgroup
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
popd
# install drivers/net/mlxsw selftests
pushd tools/testing/selftests/drivers/net/mlxsw
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
popd
# install drivers/net/netdevsim selftests
pushd tools/testing/selftests/drivers/net/netdevsim
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
popd
# install drivers/net/bonding selftests
pushd tools/testing/selftests/drivers/net/bonding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
popd
# install net/forwarding selftests
pushd tools/testing/selftests/net/forwarding
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
popd
# install net/mptcp selftests
pushd tools/testing/selftests/net/mptcp
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
popd
# install tc-testing selftests
pushd tools/testing/selftests/tc-testing
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
popd
# install livepatch selftests
pushd tools/testing/selftests/livepatch
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
popd
# install netfilter selftests
pushd tools/testing/selftests/netfilter
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \;
popd

# install memfd selftests
pushd tools/testing/selftests/memfd
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
popd
# install iommu selftests
pushd tools/testing/selftests/iommu
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
popd
# install cachestat selftests
pushd tools/testing/selftests/cachestat
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
popd
%endif

###
### clean
###

###
### scripts
###

%if %{with_tools}
%post -n kernel-tools
%systemd_post cpupower.service

%preun -n kernel-tools
%systemd_preun cpupower.service

%postun -n kernel-tools
%systemd_postun cpupower.service

%post -n kernel-tools-libs
/sbin/ldconfig

%postun -n kernel-tools-libs
/sbin/ldconfig
%endif

#
# This macro defines a %%post script for a kernel*-devel package.
#	%%kernel_devel_post [<subpackage>]
# Note we don't run hardlink if ostree is in use, as ostree is
# a far more sophisticated hardlink implementation.
# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
#
# The deletion of *.hardlink-temporary files is a temporary workaround
# for this bug in the hardlink binary (fixed in util-linux 2.38):
# https://github.com/util-linux/util-linux/issues/1602
#
%define kernel_devel_post() \
%{expand:%%post %{?1:%{1}-}devel}\
if [ -f /etc/sysconfig/kernel ]\
then\
    . /etc/sysconfig/kernel || exit $?\
fi\
if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
then\
    (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
     /usr/bin/find . -type f | while read f; do\
       hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
     done;\
     /usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
    )\
fi\
%if %{with_cross}\
    echo "Building scripts and resolve_btfids"\
    env --unset=ARCH make -C /usr/src/kernels/%{KVERREL}%{?1:+%{1}} prepare_after_cross\
%endif\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-extra package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_extra_post [<subpackage>]
#
%define kernel_modules_extra_post() \
%{expand:%%post %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-extra}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-internal package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_internal_post [<subpackage>]
#
%define kernel_modules_internal_post() \
%{expand:%%post %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-internal}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

%if %{with_realtime}
#
# This macro defines a %%post script for a kernel*-kvm package.
# It also defines a %%postun script that does the same thing.
#       %%kernel_kvm_post [<subpackage>]
#
%define kernel_kvm_post() \
%{expand:%%post %{?1:%{1}-}kvm}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}kvm}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}
%endif

#
# This macro defines a %%post script for a kernel*-modules-partner package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_partner_post [<subpackage>]
#
%define kernel_modules_partner_post() \
%{expand:%%post %{?1:%{1}-}modules-partner}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules-partner}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules package.
# It also defines a %%postun script that does the same thing.
#	%%kernel_modules_post [<subpackage>]
#
%define kernel_modules_post() \
%{expand:%%post %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
if [ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
	mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
	touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
fi\
%{nil}\
%{expand:%%postun %{?1:%{1}-}modules}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}\
%{expand:%%posttrans %{?1:%{1}-}modules}\
if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
	rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
	echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}}"\
	dracut -f --kver "%{KVERREL}%{?1:+%{1}}" || exit $?\
fi\
%{nil}

#
# This macro defines a %%post script for a kernel*-modules-core package.
#	%%kernel_modules_core_post [<subpackage>]
#
%define kernel_modules_core_post() \
%{expand:%%posttrans %{?1:%{1}-}modules-core}\
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
%{nil}

# This macro defines a %%posttrans script for a kernel package.
#	%%kernel_variant_posttrans [-v <subpackage>] [-u uki-suffix]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_posttrans(v:u:) \
%{expand:%%posttrans %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
%if 0%{!?fedora:1}\
if [ -x %{_sbindir}/weak-modules ]\
then\
    %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
fi\
%endif\
rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
/bin/kernel-install add %{KVERREL}%{?-v:+%{-v*}} /lib/modules/%{KVERREL}%{?-v:+%{-v*}}/vmlinuz%{?-u:-%{-u*}.efi} || exit $?\
if [[ ! -e "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" ]]; then\
    ln -s "/lib/modules/%{KVERREL}%{?-v:+%{-v*}}/symvers.gz" "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz"\
    command -v restorecon &>/dev/null && restorecon "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" \
fi\
%{nil}

#
# This macro defines a %%post script for a kernel package and its devel package.
#	%%kernel_variant_post [-v <subpackage>] [-r <replace>]
# More text can follow to go at the end of this variant's %%post.
#
%define kernel_variant_post(v:r:) \
%{expand:%%kernel_devel_post %{?-v*}}\
%{expand:%%kernel_modules_post %{?-v*}}\
%{expand:%%kernel_modules_core_post %{?-v*}}\
%{expand:%%kernel_modules_extra_post %{?-v*}}\
%{expand:%%kernel_modules_internal_post %{?-v*}}\
%if 0%{!?fedora:1}\
%{expand:%%kernel_modules_partner_post %{?-v*}}\
%endif\
%if "%{-v*}" == "rt" || "%{-v*}" == "rt-debug"\
%{expand:%%kernel_kvm_post %{?-v*}}\
%endif\
%{expand:%%kernel_variant_posttrans %{?-v*:-v %{-v*}}}\
%{expand:%%post %{?-v*:%{-v*}-}core}\
%{-r:\
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
   [ -f /etc/sysconfig/kernel ]; then\
  /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
fi}\
mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
%{nil}

#
# This macro defines a %%preun script for a kernel package.
#	%%kernel_variant_preun [-v <subpackage>] [-u uki-suffix]
#
%define kernel_variant_preun(v:u:) \
%{expand:%%preun %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
/bin/kernel-install remove %{KVERREL}%{?-v:+%{-v*}} || exit $?\
if [ -x %{_sbindir}/weak-modules ]\
then\
    %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
fi\
%{nil}

%if %{efiuki}
%kernel_variant_posttrans -u virt
%kernel_variant_preun -u virt
%endif

%kernel_variant_preun
%kernel_variant_post -r kernel-smp

%if %{with_pae}
%kernel_variant_preun -v lpae
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
%endif

%if %{with_zfcpdump}
%kernel_variant_preun -v zfcpdump
%kernel_variant_post -v zfcpdump
%endif

%if %{with_arm64_64k}
%kernel_variant_preun -v 64k
%kernel_variant_post -v 64k
%endif

%if %{with_debug} && %{with_arm64_64k}
%kernel_variant_preun -v 64k-debug
%kernel_variant_post -v 64k-debug
%endif

%if %{with_realtime}
%kernel_variant_preun -v rt
%kernel_variant_post -v rt
%endif

%if %{with_debug} && %{with_realtime}
%kernel_variant_preun -v rt-debug
%kernel_variant_post -v rt-debug
%endif

%if %{with_debug}
%if %{efiuki}
%kernel_variant_posttrans -v debug -u virt
%kernel_variant_preun -v debug -u virt
%endif
%kernel_variant_preun -v debug
%kernel_variant_post -v debug
%endif

if [ -x /sbin/ldconfig ]
then
    /sbin/ldconfig -X || exit $?
fi

###
### file lists
###

%if %{with_headers}
%files headers
/usr/include/*
%exclude %{_includedir}/cpufreq.h
%exclude %{_includedir}/internal/
%exclude %{_includedir}/perf/
%endif

%if %{with_cross_headers}
%files cross-headers
/usr/*-linux-gnu/include/*
%endif

%if %{with_kernel_abi_stablelists}
%files -n kernel-abi-stablelists
/lib/modules/kabi-*
%endif

%if %{with_kabidw_base}
%ifarch x86_64 s390x ppc64 ppc64le aarch64
%files kernel-kabidw-base-internal
%defattr(-,root,root)
/kabidw-base/%{_target_cpu}/*
%endif
%endif

# only some architecture builds need kernel-doc
%if %{with_doc}
%files doc
%defattr(-,root,root)
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/kernel.changelog.xz
%endif

%if %{with_perf}
%files -n perf
%{_bindir}/perf
%{_libdir}/libperf-jvmti.so
%dir %{_libexecdir}/perf-core
%{_libexecdir}/perf-core/*
%{_datadir}/perf-core/*
%{_mandir}/man[1-8]/perf*
%{_sysconfdir}/bash_completion.d/perf
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
%{_docdir}/perf-tip/tips.txt

%files -n python3-perf
%{python3_sitearch}/*

%files -n libperf
%{_libdir}/libperf.so.0
%{_libdir}/libperf.so.0.0.1

%files -n libperf-devel
%{_libdir}/libperf.so
%{_libdir}/pkgconfig/libperf.pc
%{_includedir}/perf/
%{_includedir}/internal/
%{_mandir}/man3/libperf.*
%{_mandir}/man7/libperf-counting.*
%{_mandir}/man7/libperf-sampling.*
%{_docdir}/libperf/

%if %{with_debuginfo}
%files -f perf-debuginfo.list -n perf-debuginfo

%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo

%files -f libperf-debuginfo.list -n libperf-debuginfo
%endif
# with_perf
%endif

%if %{with_tools}
%ifnarch %{cpupowerarchs}
%files -n kernel-tools
%else
%files -n kernel-tools -f cpupower.lang
%{_bindir}/cpupower
%{_datadir}/bash-completion/completions/cpupower
%ifarch x86_64
%{_bindir}/centrino-decode
%{_bindir}/powernow-k8-decode
%endif
%{_unitdir}/cpupower.service
%{_mandir}/man[1-8]/cpupower*
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
%ifarch x86_64
%{_bindir}/x86_energy_perf_policy
%{_mandir}/man8/x86_energy_perf_policy*
%{_bindir}/turbostat
%{_mandir}/man8/turbostat*
%{_bindir}/intel-speed-select
%{_sbindir}/intel_sdsi
%endif
# cpupowerarchs
%endif
%{_bindir}/tmon
%{_bindir}/iio_event_monitor
%{_bindir}/iio_generic_buffer
%{_bindir}/lsiio
%{_bindir}/lsgpio
%{_bindir}/gpio-hammer
%{_bindir}/gpio-event-mon
%{_bindir}/gpio-watch
%{_mandir}/man1/kvm_stat*
%{_bindir}/kvm_stat
%{_unitdir}/kvm_stat.service
%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
%{_bindir}/page_owner_sort
%{_bindir}/slabinfo

%if %{with_debuginfo}
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
%endif

%ifarch %{cpupowerarchs}
%files -n kernel-tools-libs
%{_libdir}/libcpupower.so.1
%{_libdir}/libcpupower.so.0.0.1

%files -n kernel-tools-libs-devel
%{_libdir}/libcpupower.so
%{_includedir}/cpufreq.h
%endif

%files -n rtla
%{_bindir}/rtla
%{_bindir}/hwnoise
%{_bindir}/osnoise
%{_bindir}/timerlat
%{_mandir}/man1/rtla-hwnoise.1.gz
%{_mandir}/man1/rtla-osnoise-hist.1.gz
%{_mandir}/man1/rtla-osnoise-top.1.gz
%{_mandir}/man1/rtla-osnoise.1.gz
%{_mandir}/man1/rtla-timerlat-hist.1.gz
%{_mandir}/man1/rtla-timerlat-top.1.gz
%{_mandir}/man1/rtla-timerlat.1.gz
%{_mandir}/man1/rtla.1.gz

%files -n rv
%{_bindir}/rv
%{_mandir}/man1/rv-list.1.gz
%{_mandir}/man1/rv-mon-wip.1.gz
%{_mandir}/man1/rv-mon-wwnr.1.gz
%{_mandir}/man1/rv-mon.1.gz
%{_mandir}/man1/rv.1.gz

# with_tools
%endif

%if %{with_bpftool}
%files -n bpftool
%{_sbindir}/bpftool
%{_sysconfdir}/bash_completion.d/bpftool
%{_mandir}/man8/bpftool-cgroup.8.gz
%{_mandir}/man8/bpftool-gen.8.gz
%{_mandir}/man8/bpftool-iter.8.gz
%{_mandir}/man8/bpftool-link.8.gz
%{_mandir}/man8/bpftool-map.8.gz
%{_mandir}/man8/bpftool-prog.8.gz
%{_mandir}/man8/bpftool-perf.8.gz
%{_mandir}/man8/bpftool.8.gz
%{_mandir}/man8/bpftool-net.8.gz
%{_mandir}/man8/bpftool-feature.8.gz
%{_mandir}/man8/bpftool-btf.8.gz
%{_mandir}/man8/bpftool-struct_ops.8.gz

%if %{with_debuginfo}
%files -f bpftool-debuginfo.list -n bpftool-debuginfo
%defattr(-,root,root)
%endif
%endif

%if %{with_selftests}
%files selftests-internal
%{_libexecdir}/ksamples
%{_libexecdir}/kselftests
%endif

# empty meta-package
%if %{with_up}
%ifnarch %nobuildarches noarch
%files
%endif
%endif

# This is %%{image_install_path} on an arch where that includes ELF files,
# or empty otherwise.
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}

#
# This macro defines the %%files sections for a kernel package
# and its devel and debuginfo packages.
#	%%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
#
%define kernel_variant_files(k:) \
%if %{2}\
%{expand:%%files %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
%{!?_licensedir:%global license %%doc}\
%%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
%ifarch %{arm} aarch64\
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
%endif\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-core.list %{?3:%{3}-}modules-core}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
%if %{1}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
%endif\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.block\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.drm\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.modesetting\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.networking\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.order\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.alias.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep.bin\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.devname\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.softdep\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols\
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols.bin\
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
%{expand:%%files %{?3:%{3}-}devel}\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
%{expand:%%files %{?3:%{3}-}devel-matched}\
%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
%{expand:%%files %{?3:%{3}-}modules-internal}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/internal\
%if 0%{!?fedora:1}\
%{expand:%%files %{?3:%{3}-}modules-partner}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/partner\
%endif\
%if "%{3}" == "rt" || "%{3}" == "rt-debug"\
%{expand:%%files %{?3:%{3}-}kvm}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/kvm\
%endif\
%if %{with_debuginfo}\
%ifnarch noarch\
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
%endif\
%endif\
%if %{efiuki}\
%if "%{3}" != "rt" && "%{3}" != "rt-debug"\
%{expand:%%files %{?3:%{3}-}uki-virt}\
%dir /lib/modules\
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi\
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/.%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.hmac\
%ghost /%{image_install_path}/efi/EFI/Linux/%{?-k:%{-k*}}%{!?-k:*}-%{KVERREL}%{?3:+%{3}}.efi\
%{expand:%%files %{?3:%{3}-}uki-virt-addons}\
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/ \
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/*.addon.efi\
%endif\
%endif\
%if %{?3:1} %{!?3:0}\
%{expand:%%files %{3}}\
%endif\
%if %{with_gcov}\
%ifnarch %nobuildarches noarch\
%{expand:%%files -f kernel-%{?3:%{3}-}gcov.list %{?3:%{3}-}gcov}\
%endif\
%endif\
%endif\
%{nil}

%kernel_variant_files %{_use_vdso} %{with_up}
%kernel_variant_files %{_use_vdso} %{with_debug} debug
%if %{with_arm64_64k}
%kernel_variant_files %{_use_vdso} %{with_debug} 64k-debug
%endif
%kernel_variant_files %{_use_vdso} %{with_realtime} rt
%if %{with_realtime}
%kernel_variant_files %{_use_vdso} %{with_debug} rt-debug
%endif
%if %{with_debug_meta}
%files debug
%files debug-core
%files debug-devel
%files debug-devel-matched
%files debug-modules
%files debug-modules-core
%files debug-modules-extra
%if %{with_arm64_64k}
%files 64k-debug
%files 64k-debug-core
%files 64k-debug-devel
%files 64k-debug-devel-matched
%files 64k-debug-modules
%files 64k-debug-modules-extra
%endif
%endif
%kernel_variant_files %{use_vdso} %{with_pae} lpae
%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
%kernel_variant_files %{_use_vdso} %{with_arm64_64k} 64k

%define kernel_variant_ipaclones(k:) \
%if %{1}\
%if %{with_ipaclones}\
%{expand:%%files %{?2:%{2}-}ipaclones-internal}\
%defattr(-,root,root)\
%defverify(not mtime)\
/usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\
%endif\
%endif\
%{nil}

%kernel_variant_ipaclones %{with_up}

# plz don't put in a version string unless you're going to tag
# and build.
#
#
%changelog
* Mon Sep 23 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-512.el9]
- cpufreq: intel_pstate: Use Meteor Lake EPPs for Arrow Lake (Steve Best) [RHEL-58617]
- cpufreq: intel_pstate: Update Meteor Lake EPPs (Steve Best) [RHEL-58617]
- tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs (Steve Best) [RHEL-57711]
- cpufreq: intel_pstate: Update Lunar Lake hybrid scaling factor (Steve Best) [RHEL-58615]
- cpufreq: intel_pstate: Update Arrow Lake hybrid scaling factor (Steve Best) [RHEL-58615]
- netfilter: flowtable: initialise extack before use (CKI Backport Bot) [RHEL-58544] {CVE-2024-45018}
- tracing/osnoise: Fix build when timerlat is not enabled (Tomas Glozar) [RHEL-39968]
- tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread() (Tomas Glozar) [RHEL-39968]
- tracing/timerlat: Only clear timer if a kthread exists (Tomas Glozar) [RHEL-39968]
- tracing/osnoise: Use a cpumask to know what threads are kthreads (Tomas Glozar) [RHEL-39968]
- cpufreq: intel_pstate: Support Emerald Rapids OOB mode (Steve Best) [RHEL-58619]
- ARM: dts: am33xx-l4: Add missing touchscreen clock properties (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Add the scale information (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Add a unit to the timeout delay (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Gather the checks on the delays (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Get rid of useless gotos (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Fix style (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Replace license text with SPDX tag (Joel Slebodnick) [RHEL-51597]
- iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Drop unused definitions from the header (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Convert to platform remove callback returning void (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Use devm_platform_get_and_ioremap_resource() (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Fix spelling mistake "atleast" -> "at least" (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Support the correctly spelled DT property (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Introduce a helper to deal with the type of hardware (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Fix an error message (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Rename a variable (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Add TSC prefix in certain macros (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Drop useless definitions from the header (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when relevant (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Fix header spacing (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Rename the subsystem enable macro (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Reorder the initialization steps (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Always provide an idle configuration (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Drop useless variables from the driver structure (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Mimic the probe from resume() (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Use driver data (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Move the driver structure allocation earlier (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Simplify divisor calculation (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Don't search the tree for our clock (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Reword the comment explaining the dividers (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack variables (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Get rid of useless gotos (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Fix style (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Replace license text with SPDX tag (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put (Joel Slebodnick) [RHEL-51597]
- mfd: ti_am335x_tscadc: Delete superfluous error message (Joel Slebodnick) [RHEL-51597]
- uki: use systemd-pcrphase dracut module (Vitaly Kuznetsov)
- selftests/thermel/intel: Add test to read workload hint (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Free MSI IRQ vectors on module exit (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Allow limited thermal MSI support (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Fix kernel warning during MSI cleanup (David Arcari) [RHEL-29349]
- thermal: trip: Pass trip pointer to .set_trip_temp() thermal zone callback (David Arcari) [RHEL-29349]
- thermal: helpers: Introduce thermal_trip_is_bound_to_cdev() (David Arcari) [RHEL-29349]
- thermal: trip: Add conversion macros for thermal trip priv field (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Enable WLT and power floor support for Lunar Lake (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Support MSI interrupt for Lunar Lake (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Remove unnecessary calls to free irq (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Add DLVR support for Lunar Lake (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Capability to map user space to firmware values (David Arcari) [RHEL-29349]
- thermal: intel: int340x: Cleanup of DLVR sysfs on driver remove (David Arcari) [RHEL-29349]
- thermal: int340x: processor_thermal: Support shared interrupts (David Arcari) [RHEL-29349]
- thermal: int3403: remove unused struct 'int3403_performance_state' (David Arcari) [RHEL-29349]
- thermal: int3400: Use sizeof(*pointer) instead of sizeof(type) (David Arcari) [RHEL-29349]
- thermal: intel: Add missing module description (David Arcari) [RHEL-29349]
- thermal: intel: int340x_thermal: replace deprecated strncpy() with strscpy() (David Arcari) [RHEL-29349]
- selftests:resctrl: Fix build failure on archs without __cpuid_count() (David Arcari) [RHEL-20790]
- x86/resctrl: Update documentation with Sub-NUMA cluster changes (David Arcari) [RHEL-20790]
- x86/resctrl: Fix arch_mbm_* array overrun on SNC (David Arcari) [RHEL-20790]
- x86/resctrl: Detect Sub-NUMA Cluster (SNC) mode (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove mongrp from CMT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove mongrp from MBA test (David Arcari) [RHEL-20790]
- selftests/resctrl: Convert ctrlgrp & mongrp to pointers (David Arcari) [RHEL-20790]
- selftests/resctrl: Make some strings passed to resctrlfs functions const (David Arcari) [RHEL-20790]
- selftests/resctrl: Simplify bandwidth report type handling (David Arcari) [RHEL-20790]
- selftests/resctrl: Add ->init() callback into resctrl_val_param (David Arcari) [RHEL-20790]
- selftests/resctrl: Add ->measure() callback to resctrl_val_param (David Arcari) [RHEL-20790]
- selftests/resctrl: Simplify mem bandwidth file code for MBA & MBM tests (David Arcari) [RHEL-20790]
- selftests/resctrl: Rename measure_vals() to measure_mem_bw_vals() & document (David Arcari) [RHEL-20790]
- selftests/resctrl: Cleanup bm_pid and ppid usage & limit scope (David Arcari) [RHEL-20790]
- selftests/resctrl: Use correct type for pids (David Arcari) [RHEL-20790]
- selftests/resctrl: Consolidate get_domain_id() into resctrl_val() (David Arcari) [RHEL-20790]
- selftests/resctrl: Make "bandwidth" consistent in comments & prints (David Arcari) [RHEL-20790]
- selftests/resctrl: Calculate resctrl FS derived mem bw over sleep(1) only (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix closing IMC fds on error and open-code R+W instead of loops (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix non-contiguous CBM for AMD (David Arcari) [RHEL-20790]
- selftests/resctrl: fix clang build warnings related to abs(), labs() calls (David Arcari) [RHEL-20790]
- selftests/resctrl: fix clang build failure: use LOCAL_HDRS (David Arcari) [RHEL-20790]
- selftests/resctrl: ksft_exit_skip() does not return (David Arcari) [RHEL-20790]
- selftests/resctrl: Move cleanups out of individual tests (David Arcari) [RHEL-20790]
- selftests/resctrl: Simplify cleanup in ctrl-c handler (David Arcari) [RHEL-20790]
- selftests/resctrl: Add cleanup function to test framework (David Arcari) [RHEL-20790]
- selftests/resctrl: Add non-contiguous CBMs CAT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Add resource_info_file_exists() (David Arcari) [RHEL-20790]
- selftests/resctrl: Split validate_resctrl_feature_request() (David Arcari) [RHEL-20790]
- selftests/resctrl: Add a helper for the non-contiguous test (David Arcari) [RHEL-20790]
- selftests/resctrl: Add test groups and name L3 CAT test L3_CAT (David Arcari) [RHEL-20790]
- selftests/resctrl: Get domain id from cache id (David Arcari) [RHEL-20790]
- selftests/resctrl: Rename resource ID to domain ID (David Arcari) [RHEL-20790]
- selftests/resctrl: Add helper to convert L2/3 to integer (David Arcari) [RHEL-20790]
- selftests/resctrl: Pass write_schemata() resource instead of test name (David Arcari) [RHEL-20790]
- selftests/resctrl: Introduce generalized test framework (David Arcari) [RHEL-20790]
- selftests/resctrl: Create struct for input parameters (David Arcari) [RHEL-20790]
- selftests/resctrl: Restore the CPU affinity after CAT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test (David Arcari) [RHEL-20790]
- selftests/resctrl: Read in less obvious order to defeat prefetch optimizations (David Arcari) [RHEL-20790]
- selftests/resctrl: Replace file write with volatile variable (David Arcari) [RHEL-20790]
- selftests/resctrl: Open perf fd before start & add error handling (David Arcari) [RHEL-20790]
- selftests/resctrl: Move cat_val() to cat_test.c and rename to cat_test() (David Arcari) [RHEL-20790]
- selftests/resctrl: Convert perf related globals to locals (David Arcari) [RHEL-20790]
- selftests/resctrl: Improve perf init (David Arcari) [RHEL-20790]
- selftests/resctrl: Consolidate naming of perf event related things (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove nested calls in perf event handling (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove unnecessary __u64 -> unsigned long conversion (David Arcari) [RHEL-20790]
- selftests/resctrl: Split show_cache_info() to test specific and generic parts (David Arcari) [RHEL-20790]
- selftests/resctrl: Split measure_cache_vals() (David Arcari) [RHEL-20790]
- selftests/resctrl: Exclude shareable bits from schemata in CAT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Create cache_portion_size() helper (David Arcari) [RHEL-20790]
- selftests/resctrl: Mark get_cache_size() cache_type const (David Arcari) [RHEL-20790]
- selftests/resctrl: Refactor get_cbm_mask() and rename to get_full_cbm() (David Arcari) [RHEL-20790]
- selftests/resctrl: Refactor fill_buf functions (David Arcari) [RHEL-20790]
- selftests/resctrl: Split fill_buf to allow tests finer-grained control (David Arcari) [RHEL-20790]
- selftests/resctrl: Change function comments to say < 0 on error (David Arcari) [RHEL-20790]
- selftests/resctrl: Don't use ctrlc_handler() outside signal handling (David Arcari) [RHEL-20790]
- selftests/resctrl: Return -1 instead of errno on error (David Arcari) [RHEL-20790]
- selftests/resctrl: Convert perror() to ksft_perror() or ksft_print_msg() (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix MBM test failure when MBA unavailable (David Arcari) [RHEL-20790]
- selftests/resctrl: Move run_benchmark() to a more fitting file (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix schemata write error check (David Arcari) [RHEL-20790]
- selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix feature checks (David Arcari) [RHEL-20790]
- selftests/resctrl: Refactor feature check to use resource and feature name (David Arcari) [RHEL-20790]
- selftests/resctrl: Move _GNU_SOURCE define into Makefile (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove duplicate feature check from CMT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Extend signal handler coverage to unmount on receiving signal (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix uninitialized .sa_flags (David Arcari) [RHEL-20790]
- selftests/resctrl: Cleanup benchmark argument parsing (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove ben_count variable (David Arcari) [RHEL-20790]
- selftests/resctrl: Make benchmark command const and build it with pointers (David Arcari) [RHEL-20790]
- selftests/resctrl: Reorder resctrl FS prep code and benchmark_cmd init (David Arcari) [RHEL-20790]
- selftests/resctrl: Simplify span lifetime (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove bw_report and bm_type from main() (David Arcari) [RHEL-20790]
- selftests/resctrl: Correct benchmark command help (David Arcari) [RHEL-20790]
- selftests/resctrl: Ensure the benchmark commands fits to its array (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix wrong format specifier (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove test type checks from cat_val() (David Arcari) [RHEL-20790]
- selftests/resctrl: Pass the real number of tests to show_cache_info() (David Arcari) [RHEL-20790]
- selftests/resctrl: Move CAT/CMT test global vars to function they are used in (David Arcari) [RHEL-20790]
- selftests/resctrl: Don't use variable argument list for ->setup() (David Arcari) [RHEL-20790]
- selftests/resctrl: Don't pass test name to fill_buf (David Arcari) [RHEL-20790]
- selftests/resctrl: Improve parameter consistency in fill_buf (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove unnecessary startptr global from fill_buf (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove duplicated preparation for span arg (David Arcari) [RHEL-20790]
- selftests/resctrl: Express span internally in bytes (David Arcari) [RHEL-20790]
- selftests/resctrl: Convert span to size_t (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove mum_resctrlfs from struct resctrl_val_param (David Arcari) [RHEL-20790]
- selftests/resctrl: Refactor remount_resctrl(bool mum_resctrlfs) to mount_resctrl() (David Arcari) [RHEL-20790]
- selftests/resctrl: Move resctrl FS mount/umount to higher level (David Arcari) [RHEL-20790]
- selftests/resctrl: Unmount resctrl FS before starting the first test (David Arcari) [RHEL-20790]
- selftests/resctrl: Close perf value read fd on errors (David Arcari) [RHEL-20790]
- selftests/resctrl: Unmount resctrl FS if child fails to run benchmark (David Arcari) [RHEL-20790]
- selftests/resctrl: Don't leak buffer in fill_cache() (David Arcari) [RHEL-20790]
- selftests/resctrl: Add resctrl.h into build deps (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix incorrect error return on test complete (David Arcari) [RHEL-20790]
- selftests/resctrl: Remove duplicate codes that clear each test result file (David Arcari) [RHEL-20790]
- selftests/resctrl: Commonize the signal handler register/unregister for all tests (David Arcari) [RHEL-20790]
- selftests/resctrl: Cleanup properly when an error occurs in CAT test (David Arcari) [RHEL-20790]
- selftests/resctrl: Flush stdout file buffer before executing fork() (David Arcari) [RHEL-20790]
- selftests/resctrl: Return MBA check result and make it to output message (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix set up schemata with 100%% allocation on first run in MBM test (David Arcari) [RHEL-20790]
- selftests/resctrl: Use correct exit code when tests fail (David Arcari) [RHEL-20790]
- selftests/resctrl: Correct get_llc_perf() param in function comment (David Arcari) [RHEL-20790]
- selftests/resctrl: Use remount_resctrlfs() consistently with boolean (David Arcari) [RHEL-20790]
- selftests/resctrl: Change name from CBM_MASK_PATH to INFO_PATH (David Arcari) [RHEL-20790]
- selftests/resctrl: Change initialize_llc_perf() return type to void (David Arcari) [RHEL-20790]
- selftests/resctrl: Replace obsolete memalign() with posix_memalign() (David Arcari) [RHEL-20790]
- selftests/resctrl: Check for return value after write_schemata() (David Arcari) [RHEL-20790]
- selftests/resctrl: Allow ->setup() to return errors (David Arcari) [RHEL-20790]
- selftests/resctrl: Move ->setup() call outside of test specific branches (David Arcari) [RHEL-20790]
- selftests/resctrl: Return NULL if malloc_and_init_memory() did not alloc mem (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix null pointer dereference on open failed (David Arcari) [RHEL-20790]
- selftests/resctrl: Add missing SPDX license to Makefile (David Arcari) [RHEL-20790]
- selftests/resctrl: Update README about using kselftest framework to build/run resctrl_tests (David Arcari) [RHEL-20790]
- selftests/resctrl: Make resctrl_tests run using kselftest framework (David Arcari) [RHEL-20790]
- selftests/resctrl: Fix resctrl_tests' return code to work with selftest framework (David Arcari) [RHEL-20790]
- selftests/resctrl: Change the default limited time to 120 seconds (David Arcari) [RHEL-20790]
- selftests/resctrl: Kill child process before parent process terminates if SIGTERM is received (David Arcari) [RHEL-20790]
- selftests/resctrl: Print a message if the result of MBM&CMT tests is failed on Intel CPU (David Arcari) [RHEL-20790]
- selftests/resctrl: Extend CPU vendor detection (David Arcari) [RHEL-20790]
- x86/resctrl: Enable shared RMID mode on Sub-NUMA Cluster (SNC) systems (David Arcari) [RHEL-20790]
- x86/resctrl: Make __mon_event_count() handle sum domains (David Arcari) [RHEL-20790]
- x86/resctrl: Fill out rmid_read structure for smp_call*() to read a counter (David Arcari) [RHEL-20790]
- x86/resctrl: Handle removing directories in Sub-NUMA Cluster (SNC) mode (David Arcari) [RHEL-20790]
- x86/resctrl: Create Sub-NUMA Cluster (SNC) monitor files (David Arcari) [RHEL-20790]
- x86/resctrl: Allocate a new field in union mon_data_bits (David Arcari) [RHEL-20790]
- x86/resctrl: Refactor mkdir_mondata_subdir() with a helper function (David Arcari) [RHEL-20790]
- x86/resctrl: Initialize on-stack struct rmid_read instances (David Arcari) [RHEL-20790]
- x86/resctrl: Add a new field to struct rmid_read for summation of domains (David Arcari) [RHEL-20790]
- x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files (David Arcari) [RHEL-20790]
- x86/resctrl: Block use of mba_MBps mount option on Sub-NUMA Cluster (SNC) systems (David Arcari) [RHEL-20790]
- x86/resctrl: Introduce snc_nodes_per_l3_cache (David Arcari) [RHEL-20790]
- x86/resctrl: Add node-scope to the options for feature scope (David Arcari) [RHEL-20790]
- x86/resctrl: Split the rdt_domain and rdt_hw_domain structures (David Arcari) [RHEL-20790]
- x86/resctrl: Prepare for different scope for control/monitor operations (David Arcari) [RHEL-20790]
- x86/resctrl: Prepare to split rdt_domain structure (David Arcari) [RHEL-20790]
- x86/resctrl: Prepare for new domain scope (David Arcari) [RHEL-20790]
- x86/resctrl: Don't try to free nonexistent RMIDs (David Arcari) [RHEL-20790]
- x86/resctrl: Replace open coded cacheinfo searches (David Arcari) [RHEL-20790]
- cacheinfo: Add function to get cacheinfo for a given CPU and cache level (David Arcari) [RHEL-20790]
- cpu: Move CPU hotplug function declarations into their own header (David Arcari) [RHEL-20790]
- x86/resctrl: Switch to new Intel CPU model defines (David Arcari) [RHEL-20790]
- x86/resctrl: Add tracepoint for llc_occupancy tracking (David Arcari) [RHEL-20790]
- x86/resctrl: Rename pseudo_lock_event.h to trace.h (David Arcari) [RHEL-20790]
- x86/resctrl: Simplify call convention for MSR update functions (David Arcari) [RHEL-20790]
- x86/resctrl: Pass domain to target CPU (David Arcari) [RHEL-20790]
- x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline (David Arcari) [RHEL-20790]
- x86/resctrl: Remove lockdep annotation that triggers false positive (David Arcari) [RHEL-20790]
- x86/resctrl: Separate arch and fs resctrl locks (David Arcari) [RHEL-20790]
- x86/resctrl: Move domain helper migration into resctrl_offline_cpu() (David Arcari) [RHEL-20790]
- x86/resctrl: Add CPU offline callback for resctrl work (David Arcari) [RHEL-20790]
- x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but CPU (David Arcari) [RHEL-20790]
- x86/resctrl: Add CPU online callback for resctrl work (David Arcari) [RHEL-20790]
- x86/resctrl: Add helpers for system wide mon/alloc capable (David Arcari) [RHEL-20790]
- x86/resctrl: Make rdt_enable_key the arch's decision to switch (David Arcari) [RHEL-20790]
- x86/resctrl: Move alloc/mon static keys into helpers (David Arcari) [RHEL-20790]
- x86/resctrl: Make resctrl_mounted checks explicit (David Arcari) [RHEL-20790]
- x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read() (David Arcari) [RHEL-20790]
- x86/resctrl: Allow resctrl_arch_rmid_read() to sleep (David Arcari) [RHEL-20790]
- x86/resctrl: Queue mon_event_read() instead of sending an IPI (David Arcari) [RHEL-20790]
- x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow (David Arcari) [RHEL-20790]
- x86/resctrl: Move CLOSID/RMID matching and setting to use helpers (David Arcari) [RHEL-20790]
- x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid (David Arcari) [RHEL-20790]
- x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding (David Arcari) [RHEL-20790]
- x86/resctrl: Track the number of dirty RMID a CLOSID has (David Arcari) [RHEL-20790]
- x86/resctrl: Allow RMID allocation to be scoped by CLOSID (David Arcari) [RHEL-20790]
- x86/resctrl: Access per-rmid structures by index (David Arcari) [RHEL-20790]
- x86/resctrl: Track the closid with the rmid (David Arcari) [RHEL-20790]
- x86/resctrl: Move RMID allocation out of mkdir_rdt_prepare() (David Arcari) [RHEL-20790]
- x86/resctrl: Create helper for RMID allocation and mondata dir creation (David Arcari) [RHEL-20790]
- x86/resctrl: Free rmid_ptrs from resctrl_exit() (David Arcari) [RHEL-20790]
- x86/resctrl: Implement new mba_MBps throttling heuristic (David Arcari) [RHEL-20790]
- x86/resctrl: Fix unused variable warning in cache_alloc_hsw_probe() (David Arcari) [RHEL-20790]
- md/raid5: avoid BUG_ON() while continue reshape after reassembling (CKI Backport Bot) [RHEL-56203] {CVE-2024-43914}
- tcp: move inet_twsk_schedule helper out of header (Florian Westphal) [RHEL-9279]
- net: tcp: un-pin the tw_timer (Florian Westphal) [RHEL-9279]
- net: tcp/dccp: prepare for tw_timer un-pinning (Florian Westphal) [RHEL-9279]
- tcp: annotate data-races around tw->tw_ts_recent and tw->tw_ts_recent_stamp (Florian Westphal) [RHEL-9279]
- md: fix deadlock between mddev_suspend and flush bio (Nigel Croxon) [RHEL-54757] {CVE-2024-43855}
- rhel-only: selftests/bpf: add cpuv4 variant (Artem Savkov) [RHEL-50017]
- PCI: hv: Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Maxim Levitsky) [RHEL-54308]
- Input: serio - use sizeof(*pointer) instead of sizeof(type) (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: Cosmetic changes for hv.c and balloon.c (Maxim Levitsky) [RHEL-54308]
- hv_balloon: Enable hot-add for memblock sizes > 128 MiB (Maxim Levitsky) [RHEL-54308]
- hv_balloon: Use kernel macros to simplify open coded sequences (Maxim Levitsky) [RHEL-54308]
- uio_hv_generic: Remove use of PAGE_SIZE (Maxim Levitsky) [RHEL-54308]
- uio_hv_generic: Enable interrupt for low speed VMBus devices (Maxim Levitsky) [RHEL-54308]
- uio_hv_generic: Query the ringbuffer size for device (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Add utility function for querying ring size (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted (Maxim Levitsky) [RHEL-54308]
- uio_hv_generic: Don't free decrypted memory (Maxim Levitsky) [RHEL-54308]
- hv_netvsc: Don't free decrypted memory (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails (Maxim Levitsky) [RHEL-54308]
- hv: vmbus: Convert sprintf() family to sysfs_emit() family (Maxim Levitsky) [RHEL-54308]
- mshyperv: Introduce hv_numa_node_to_pxm_info() (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Cosmetic changes for hv_apic.c (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Use Hyper-V entropy to seed guest random number generator (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Cosmetic changes for hv_spinlock.c (Maxim Levitsky) [RHEL-54308]
- hyperv-tlfs: Rename some HV_REGISTER_* defines for consistency (Maxim Levitsky) [RHEL-54308]
- hv: vmbus: Convert to platform remove callback returning void (Maxim Levitsky) [RHEL-54308]
- mshyperv: Introduce hv_get_hypervisor_version function (Maxim Levitsky) [RHEL-54308]
- PCI: hv: Fix ring buffer size calculation (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Use per cpu initial stack for vtl context (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: make hv_bus const (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Allow 15-bit APIC IDs for VTL platforms (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad() (Maxim Levitsky) [RHEL-54308]
- x86/mm: Regularize set_memory_p() parameters and make non-static (Maxim Levitsky) [RHEL-54308]
- x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Update indentation in create_gpadl_header() (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header() (Maxim Levitsky) [RHEL-54308]
- Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory (Maxim Levitsky) [RHEL-54308]
- hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC (Maxim Levitsky) [RHEL-54308]
- scsi: storvsc: Fix ring buffer size calculation (Maxim Levitsky) [RHEL-54308]
- virtio/vsock: send credit update during setting SO_RCVLOWAT (Maxim Levitsky) [RHEL-54308]
- redhat: kernel.spec: add missing sound/soc/sof/sof-audio.h to kernel-devel package (Jaroslav Kysela) [RHEL-16610]

* Wed Sep 18 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-511.el9]
- ipv4: Set scope explicitly in ip_route_output(). (CKI Backport Bot) [RHEL-57748]
- ACPI: thermal_lib: Initialize temp_decik to zero (Mark Langsdorf) [RHEL-54149]
- ACPI: thermal_lib: include "internal.h" for function prototypes (Mark Langsdorf) [RHEL-54149]
- ACPI: thermal: Register thermal zones without valid trip points (Mark Langsdorf) [RHEL-54149]
- ACPI: thermal: Use library functions to obtain trip point temperature values (Mark Langsdorf) [RHEL-54149]
- ACPI: thermal_lib: Add functions returning temperature in deci-Kelvin (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Don't use "proxy" headers (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Make container_of() no-op where it makes sense (Mark Langsdorf) [RHEL-54149]
- ACPI: NHLT: Drop redundant types (Mark Langsdorf) [RHEL-54149]
- ACPI: NHLT: Streamline struct naming (Mark Langsdorf) [RHEL-54149]
- ACPI: NHLT: Reintroduce types the table consists of (Mark Langsdorf) [RHEL-54149]
- ACPI: NHLT: Introduce API for the table (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: allow _UID matching for integer zero (Mark Langsdorf) [RHEL-54149]
- ACPI: processor_idle: Fix invalid comparison with insertion sort for latency (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Ignore camera graph port nodes on all Dell Tiger, Alder and Raptor Lake models (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Force StorageD3Enable on more products (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Avoid enumerating devices with clearly invalid _STA values (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV (Mark Langsdorf) [RHEL-54149]
- hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems (Mark Langsdorf) [RHEL-54149]
- ACPI: IPMI: Add helper to wait for when SMI is selected (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Add reference to UEFI DSD Guide (Mark Langsdorf) [RHEL-54149]
- ACPI/IORT: Handle memory address size limits as limits (Mark Langsdorf) [RHEL-54149]
- ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23) (Mark Langsdorf) [RHEL-54149]
- ACPICA: Detect FACS even for hardware reduced platforms (Mark Langsdorf) [RHEL-54149]
- ACPI: AC: Properly notify powermanagement core about changes (Mark Langsdorf) [RHEL-54149]
- ACPI: EC: Avoid returning AE_OK on errors in address space handler (Mark Langsdorf) [RHEL-54149]
- ACPI: EC: Abort address space access upon error (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: EINJ: Fix einj_dev release leak (Mark Langsdorf) [RHEL-54149]
- ACPI: EC: Evaluate _REG outside the EC scope more carefully (Mark Langsdorf) [RHEL-54149]
- ACPICA: Add a depth argument to acpi_execute_reg_methods() (Mark Langsdorf) [RHEL-54149]
- ACPI: EC: Install address space handler at the namespace root (Mark Langsdorf) [RHEL-54149]
- ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity() (Mark Langsdorf) [RHEL-54149]
- ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit() (Mark Langsdorf) [RHEL-54149]
- ACPI/NUMA: Remove architecture dependent remainings (Mark Langsdorf) [RHEL-54149]
- x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks() (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7 (Mark Langsdorf) [RHEL-54149]
- ACPI: platform-profile: add platform_profile_cycle() (Mark Langsdorf) [RHEL-54149]
- ACPICA: events/evgpeinit: don't forget to increment registered GPE count (Mark Langsdorf) [RHEL-54149]
- ACPICA: Modify ACPI_OBJECT_COMMON_HEADER (Mark Langsdorf) [RHEL-54149]
- ACPICA: Fix various spelling mistakes in text files and code comments (Mark Langsdorf) [RHEL-54149]
- ACPI: disable -Wstringop-truncation (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: utils: Mark SMO8810 accel on Dell XPS 15 9550 as always present (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Do not increase dep_unmet for already met dependencies (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Move LPSS to x86 folder (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Move blacklist to x86 folder (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Move acpi_cmos_rtc to x86 folder (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Introduce a Makefile (Mark Langsdorf) [RHEL-54149]
- ACPI: LPSS: Remove nested ifdeffery for CONFIG_PM (Mark Langsdorf) [RHEL-54149]
- ACPI: LPSS: Advertise number of chip selects via property (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: EINJ: mark remove callback as __exit (Mark Langsdorf) [RHEL-54149]
- ACPI: store owner from modules with acpi_bus_register_driver() (Mark Langsdorf) [RHEL-54149]
- ACPI: DPTF: Add Lunar Lake support (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Introduce typedef:s for struct acpi_hotplug_context members (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Use standard error checking pattern (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Move misleading comment to acpi_dma_configure_id() (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Use list_first_entry_or_null() in acpi_device_hid() (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Indicate support for IRQ ResourceSource thru _OSC (Mark Langsdorf) [RHEL-54149]
- ACPI: Fix Generic Initiator Affinity _OSC bit (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Indicate support for the Generic Event Device thru _OSC (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Indicate support for more than 16 p-states thru _OSC (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: Indicate support for _TFP thru _OSC (Mark Langsdorf) [RHEL-54149]
- ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields() (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: EINJ: mark remove callback as non-__exit (Mark Langsdorf) [RHEL-54149]
- ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions (Mark Langsdorf) [RHEL-54149]
- ACPI: Document handle_eject_request() arguments (Mark Langsdorf) [RHEL-54149]
- EINJ: Add CXL error type support (Mark Langsdorf) [RHEL-54149]
- redhat/configs: Support for CXL protocol Error INJection (Mark Langsdorf) [RHEL-54149]
- EINJ: Migrate to a platform driver (Mark Langsdorf) [RHEL-54149]
- ACPI: HMAT: Introduce 2 levels of generic port access class (Mark Langsdorf) [RHEL-54149]
- base/node / ACPI: Enumerate node access class for 'struct access_coordinate' (Mark Langsdorf) [RHEL-54149]
- ACPI: HMAT: Remove register of memory node for generic target (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Use IRQ override on Maibenben X565 (Mark Langsdorf) [RHEL-54149]
- ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Consolidate Device Check and Bus Check notification handling (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Rework Device Check and Bus Check notification handling (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Make acpi_processor_add() check the device enabled bit (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Relocate acpi_bus_trim_one() (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Fix device check notification handling (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override (Mark Langsdorf) [RHEL-54149]
- ACPI: pfr_update: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: pfr_telemetry: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: fan: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: GED: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: DPTF: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: AGDI: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: TAD: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: GHES: Convert to platform remove callback returning void (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Polish ignoring bad data nodes (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: Move acpi_quirk_skip_serdev_enumeration() out of CONFIG_X86_ANDROID_TABLETS (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Do IRQ override on Lunnen Ground laptops (Mark Langsdorf) [RHEL-54149]
- ACPI: use %%pe for better readability of errors while printing (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Ignore bad graph port nodes on Dell XPS 9315 (Mark Langsdorf) [RHEL-54149]
- ACPI: utils: Make acpi_handle_path() not static (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Add IRQ override quirk for ASUS ExpertBook B2502FBA (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: make acpi_bus_type const (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CVA (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Handle fetching EDID that is longer than 256 bytes (Mark Langsdorf) [RHEL-54149]
- ACPI: cpufreq: Add highest perf change notification (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CGA (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Add DMI quirks for ASUS Vivobook E1504GA and E1504GAB (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override (Mark Langsdorf) [RHEL-54149]
- ACPI: button: trigger wakeup key events (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Add another DMI match for the TongFang GMxXGxx (Mark Langsdorf) [RHEL-54149]
- ACPI: EC: Use a threaded handler for dedicated IRQ (Mark Langsdorf) [RHEL-54149]
- ACPI: OSL: Use spin locks without disabling interrupts (Mark Langsdorf) [RHEL-54149]
- acpi: numa: Add helper function to retrieve the performance attributes (Mark Langsdorf) [RHEL-54149]
- acpi: numa: Add setting of generic port system locality attributes (Mark Langsdorf) [RHEL-54149]
- acpi: Break out nesting for hmat_parse_locality() (Mark Langsdorf) [RHEL-54149]
- acpi: numa: Add genport target allocation to the HMAT parsing (Mark Langsdorf) [RHEL-54149]
- acpi: numa: Create enum for memory_target access coordinates indexing (Mark Langsdorf) [RHEL-54149]
- base/node / acpi: Change 'node_hmem_attrs' to 'access_coordinates' (Mark Langsdorf) [RHEL-54149]
- acpi, hmat: calculate abstract distance with HMAT (Mark Langsdorf) [RHEL-54149]
- memory tiering: add abstract distance calculation algorithms management (Mark Langsdorf) [RHEL-54149]
- lib/firmware_table: tables: Add CDAT table parsing support (Mark Langsdorf) [RHEL-54149]
- ACPICA: Add a define for size of struct acpi_srat_generic_affinity device_handle (Mark Langsdorf) [RHEL-54149]
- ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events (Mark Langsdorf) [RHEL-54149]
- ACPI: utils: Introduce helper for _DEP list lookup (Mark Langsdorf) [RHEL-54149]
- ACPI: LPSS: Fix the fractional clock divider flags (Mark Langsdorf) [RHEL-54149]
- ACPI: NUMA: Fix the logic of getting the fake_pxm value (Mark Langsdorf) [RHEL-54149]
- ACPI: NUMA: Optimize the check for the availability of node values (Mark Langsdorf) [RHEL-54149]
- ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity() (Mark Langsdorf) [RHEL-54149]
- ACPI: watchdog: fix kernel-doc warnings (Mark Langsdorf) [RHEL-54149]
- acpi: property: Let args be NULL in __acpi_node_get_property_reference (Mark Langsdorf) [RHEL-54149]
- ACPI: extlog: fix NULL pointer dereference check (Mark Langsdorf) [RHEL-54149]
- ACPI: OSL: Allow Notify () handlers to run on all CPUs (Mark Langsdorf) [RHEL-54149]
- ACPI: OSL: Rearrange workqueue selection in acpi_os_execute() (Mark Langsdorf) [RHEL-54149]
- ACPI: OSL: Rework error handling in acpi_os_execute() (Mark Langsdorf) [RHEL-54149]
- PNP: ACPI: fix fortify warning (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop (Mark Langsdorf) [RHEL-54149]
- ACPI: LPSS: use acpi_dev_uid_match() for matching _UID (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types (Mark Langsdorf) [RHEL-54149]
- ACPI: bus: update acpi_dev_uid_match() to support multiple types (Mark Langsdorf) [RHEL-54149]
- drivers: base: Implement weak arch_unregister_cpu() (Mark Langsdorf) [RHEL-54149]
- drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden (Mark Langsdorf) [RHEL-54149]
- drivers: base: Use present CPUs in GENERIC_CPU_DEVICES (Mark Langsdorf) [RHEL-54149]
- ACPI: Move ACPI_HOTPLUG_CPU to be disabled on arm64 and riscv (Mark Langsdorf) [RHEL-54149]
- hwmon: (acpi_power_meter) Fix 4.29 MW bug (Mark Langsdorf) [RHEL-54149]
- x86/acpi: Use %%rip-relative addressing in wakeup_64.S (Mark Langsdorf) [RHEL-54149]
- genirq: Set IRQF_COND_ONESHOT in request_irq() (Mark Langsdorf) [RHEL-54149]
- genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd (Mark Langsdorf) [RHEL-54149]
- platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq() (Mark Langsdorf) [RHEL-54149]
- pinctrl: amd: Add IRQF_ONESHOT to the interrupt request (Mark Langsdorf) [RHEL-54149]
- ACPI: OSL: Use a threaded interrupt handler for SCI (Mark Langsdorf) [RHEL-54149]
- ACPI: video: check for error while searching for backlight device parent (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Fix an error message in DisCo for Imaging support (Mark Langsdorf) [RHEL-54149]
- ACPI: Run USB4 _OSC() first with query bit set (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Drop should_check_lcd_flag() (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Replicate DT-aligned u32 properties from DisCo for Imaging (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Dig "rotation" property for devices with CSI2 _CRS (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Extract MIPI DisCo for Imaging data into swnodes (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Extract _CRS CSI-2 connection information into swnodes (Mark Langsdorf) [RHEL-54149]
- ACPI: scan: Extract CSI-2 connection graph from _CRS (Mark Langsdorf) [RHEL-54149]
- device property: Add SOFTWARE_NODE() macro for defining software nodes (Mark Langsdorf) [RHEL-54149]
- ACPI: property: Support using strings in reference properties (Mark Langsdorf) [RHEL-54149]
- hwmon: (acpi_power_meter) replace open-coded kmemdup_nul (Mark Langsdorf) [RHEL-54149]
- PNP: ACPI: replace deprecated strncpy() with strscpy() (Mark Langsdorf) [RHEL-54149]
- ACPI: AC: Rename ACPI device from device to adev (Mark Langsdorf) [RHEL-54149]
- acpi, hmat: refactor hmat_register_target_initiators() (Mark Langsdorf) [RHEL-54149]
- ACPI: AC: Replace acpi_driver with platform_driver (Mark Langsdorf) [RHEL-54149]
- PNP: ACPI: Fix string truncation warning (Mark Langsdorf) [RHEL-54149]
- ACPI: tiny-power-button: Eliminate the driver notify callback (Mark Langsdorf) [RHEL-54149]
- ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA (Mark Langsdorf) [RHEL-54149]
- ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable (Mark Langsdorf) [RHEL-54149]
- PM: ACPI: reboot: Reinstate S5 for reboot (Mark Langsdorf) [RHEL-54149]
- kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode (Mark Langsdorf) [RHEL-54149]
- hwmon: (acpi_power_meter) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Add Toshiba Satellite/Portege Z830 quirk (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Simplify acpi_video_unregister_backlight() (Mark Langsdorf) [RHEL-54149]
- ACPI: video: Remove acpi_video_bus from list before tearing it down (Mark Langsdorf) [RHEL-54149]
- ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string (Mark Langsdorf) [RHEL-54149]
- ACPI: OSI: Remove Linux-Dell-Video _OSI string (Mark Langsdorf) [RHEL-54149]
- ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string (Mark Langsdorf) [RHEL-54149]
- ACPICA: executer/exsystem: Fix some typo mistakes (Mark Langsdorf) [RHEL-54149]
- hwmon: (acpi_power_meter) Fix style issues (Mark Langsdorf) [RHEL-54149]
- arm64: Use do_kernel_power_off() (Mark Langsdorf) [RHEL-54149]
- efi: Fix efi_power_off() not being run before acpi_power_off() when necessary (Mark Langsdorf) [RHEL-54149]
- ACPI: power: Switch to sys-off handler API (Mark Langsdorf) [RHEL-54149]
- ACPICA: executer/exsystem: Inform users about ACPI spec violation (Mark Langsdorf) [RHEL-54149]
- ACPICA: executer/exsystem: Add units to time variable names (Mark Langsdorf) [RHEL-54149]
- s390/dasd: Remove DMA alignment (Mete Durlu) [RHEL-58207]
- pipe: wakeup wr_wait after setting max_usage (Brian Foster) [RHEL-37087] {CVE-2023-52672}
- fs/pipe: use spinlock in pipe_read() only if there is a watch_queue (Brian Foster) [RHEL-37087]
- fs/pipe: remove unnecessary spinlock from pipe_write() (Brian Foster) [RHEL-37087]
- fs/pipe: move check to pipe_has_watch_queue() (Brian Foster) [RHEL-37087]
- pipe: reduce padding in struct pipe_inode_info (Brian Foster) [RHEL-37087]
- pipe: make poll_usage boolean and annotate its access (Brian Foster) [RHEL-37087]
- bonding: fix xfrm real_dev null pointer dereference (CKI Backport Bot) [RHEL-57241] {CVE-2024-44989}
- bonding: fix null pointer deref in bond_ipsec_offload_ok (CKI Backport Bot) [RHEL-57235] {CVE-2024-44990}
- ibmveth: Recycle buffers during replenish phase (Mamatha Inamdar) [RHEL-52913]
- ibmveth: Optimize poll rescheduling process (Mamatha Inamdar) [RHEL-52913]
- gpio: pca953x: fix pca953x_irq_bus_sync_unlock race (CKI Backport Bot) [RHEL-53831] {CVE-2024-42253}

* Mon Sep 16 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-510.el9]
- perf: Fix event leak upon exec and file release (Michael Petlan) [RHEL-55606] {CVE-2024-43869}
- perf: Fix event leak upon exit (Michael Petlan) [RHEL-55603] {CVE-2024-43870}
- task_work: Introduce task_work_cancel() again (Michael Petlan) [RHEL-55603]
- task_work: s/task_work_cancel()/task_work_cancel_func()/ (Michael Petlan) [RHEL-55603]
- net: openvswitch: fix overwriting ct original tuple for ICMPv6 (cki-backport-bot) [RHEL-44213] {CVE-2024-38558}
- net: drop bad gso csum_start and offset in virtio_net_hdr (Laurent Vivier) [RHEL-54891] {CVE-2024-43817}
- net: change maximum number of UDP segments to 128 (Laurent Vivier) [RHEL-54891] {CVE-2024-43817}
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation (Laurent Vivier) [RHEL-54891] {CVE-2024-43817}
- net: missing check virtio (Laurent Vivier) [RHEL-54891] {CVE-2024-43817}
- fuse: Initialize beyond-EOF page contents before setting uptodate (CKI Backport Bot) [RHEL-56932] {CVE-2024-44947}
- wifi: mac80211: Avoid address calculations via out of bounds array indexing (CKI Backport Bot) [RHEL-51285] {CVE-2024-41071}
- nvme-pci: add missing condition check for existence of mapped data (Maurizio Lombardi) [RHEL-55099] {CVE-2024-42276}
- sctp: fix association labeling in the duplicate COOKIE-ECHO case (Ondrej Mosnacek) [RHEL-48647]
- s390/ap: Refine AP bus bindings complete processing (Cédric Le Goater) [RHEL-50373]
- ice: Add netif_device_attach/detach into PF reset flow (Michal Schmidt) [RHEL-56084]
- ext4: make sure the first directory block is not a hole (CKI Backport Bot) [RHEL-54975] {CVE-2024-42304}
- ext4: check dot and dotdot of dx_root before making dir indexed (CKI Backport Bot) [RHEL-54964] {CVE-2024-42305}

* Fri Sep 13 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-509.el9]
- RDMA/mana_ib: Set correct device into ib (Maxim Levitsky) [RHEL-54330]
- net: mana: Fix possible double free in error handling path (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Ignore optional access flags for MRs (Maxim Levitsky) [RHEL-54330]
- net: mana: Add support for page sizes other than 4KB on ARM64 (Maxim Levitsky) [RHEL-54330]
- net: mana: Use mana_cleanup_port_context() for rxq cleanup (Maxim Levitsky) [RHEL-54330]
- net: mana: Allow variable size indirection table (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Process QP error events in mana_ib (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: extend query device (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: set node_guid (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Modify QP state (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Implement uapi to create and destroy RC QP (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Create and destroy RC QP (Maxim Levitsky) [RHEL-54330]
- net: mana: Fix the extra HZ in mana_hwc_send_request (Maxim Levitsky) [RHEL-54330]
- net: mana: Enable MANA driver on ARM64 with 4K page size (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: implement uapi for creation of rnic cq (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: boundary check before installing cq callbacks (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: introduce a helper to remove cq callbacks (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: create and destroy RNIC cqs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: create EQs for RNIC CQs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Fix missing ret value (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Configure mac address in RNIC (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Adding and deleting GIDs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Enable RoCE on port 1 (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Implement port parameters (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Create and destroy rnic adapter (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Add EQ creation for rnic adapter (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Use num_comp_vectors of ib_device (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: remove useless return values from dbg prints (Maxim Levitsky) [RHEL-54330]
- net: mana: Avoid open coded arithmetic (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Prefer struct_size over open coded arithmetic (Maxim Levitsky) [RHEL-54330]
- net: mana: Add flex array to struct mana_cfg_rx_steer_req_v2 (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Use struct mana_ib_queue for RAW QPs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Use struct mana_ib_queue for WQs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Use struct mana_ib_queue for CQs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Introduce helpers to create and destroy mana queues (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Use virtual address in dma regions for MRs (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Fix bug in creation of dma regions (Maxim Levitsky) [RHEL-54330]
- net: mana: Assigning IRQ affinity on HT cores (Maxim Levitsky) [RHEL-54330]
- net: mana: add a function to spread IRQs per CPUs (Maxim Levitsky) [RHEL-54330]
- cpumask: define cleanup function for cpumasks (Maxim Levitsky) [RHEL-54330]
- cpumask: add cpumask_weight_andnot() (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Introduce mana_ib_get_netdev helper function (Maxim Levitsky) [RHEL-54330]
- RDMA/mana_ib: Introduce mdev_to_gc helper function (Maxim Levitsky) [RHEL-54330]
- ping: fix address binding wrt vrf (Antoine Tenart) [RHEL-50920]
- mtd: spi-nor: core: Introduce method for RDID op (Joel Slebodnick) [RHEL-40636]
- mtd: spi-nor: core: Use auto-detection only once (Joel Slebodnick) [RHEL-40636]
- mtd: spi-nor: Introduce spi_nor_match_id() (Joel Slebodnick) [RHEL-40636]
- mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_name (Joel Slebodnick) [RHEL-40636]

* Thu Sep 12 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-508.el9]
- usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB (Desnes Nunes) [RHEL-52378] {CVE-2024-42226}
- redhat: set defaults for RHEL 9.5 (Lucas Zampieri)
- redhat/configs: Make CONFIG_REGULATOR_GPIO built-in (Luiz Capitulino) [RHEL-21095]
- redhat/configs: enable a bunch of regulators (Luiz Capitulino) [RHEL-21095]
- md-cluster: fix no recovery job when adding/re-adding a disk (Nigel Croxon) [RHEL-46615]
- md-cluster: fix hanging issue while a new disk adding (Nigel Croxon) [RHEL-46615]
- md/raid5: recheck if reshape has finished with device_lock held (Nigel Croxon) [RHEL-46615]
- md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl (Nigel Croxon) [RHEL-46615]
- md-cluster: Constify struct md_cluster_operations (Nigel Croxon) [RHEL-46615]
- md/raid5: fix spares errors about rcu usage (Nigel Croxon) [RHEL-46615]
- md: pass in max_sectors for pers->sync_request() (Nigel Croxon) [RHEL-46615]
- md: factor out helpers for different sync_action in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: replace last_sync_action with new enum type (Nigel Croxon) [RHEL-46615]
- md: use new helpers in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: don't fail action_store() if sync_thread is not registered (Nigel Croxon) [RHEL-46615]
- md: remove parameter check_seq for stop_sync_thread() (Nigel Croxon) [RHEL-46615]
- md: replace sysfs api sync_action with new helpers (Nigel Croxon) [RHEL-46615]
- md: factor out helper to start reshape from action_store() (Nigel Croxon) [RHEL-46615]
- md: add new helpers for sync_action (Nigel Croxon) [RHEL-46615]
- md: add a new enum type sync_action (Nigel Croxon) [RHEL-46615]
- md: rearrange recovery_flags (Nigel Croxon) [RHEL-46615]
- md/md-bitmap: fix writing non bitmap pages (Nigel Croxon) [RHEL-46615]
- md: make md_flush_request() more readable (Nigel Croxon) [RHEL-46615]
- md: change the return value type of md_write_start to void (Nigel Croxon) [RHEL-46615]
- md: do not delete safemode_timer in mddev_suspend (Nigel Croxon) [RHEL-46615]
- lib: objagg: Fix general protection fault (Waiman Long) [RHEL-54790 RHEL-54793] {CVE-2024-43846}
- Revert "x86/topology: Switch over to GENERIC_CPU_DEVICES" (David Arcari) [RHEL-58031]
- Revert "x86/topology: use weak version of arch_unregister_cpu()" (David Arcari) [RHEL-58031]
- Revert "x86/topology: convert to use arch_cpu_is_hotpluggable()" (David Arcari) [RHEL-58031]
- Revert "x86/cpu: Move leftover contents of topology.c to setup.c" (David Arcari) [RHEL-58031]
- x86/resctrl: Remove redundant variable in mbm_config_write_domain() (David Arcari) [RHEL-57701]
- x86/resctrl: Read supported bandwidth sources from CPUID (David Arcari) [RHEL-57701]
- x86/resctrl: Remove hard-coded memory bandwidth limit (David Arcari) [RHEL-57701]

* Wed Sep 11 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-507.el9]
- block: fix deadlock between sd_remove & sd_release (CKI Backport Bot) [RHEL-54997] {CVE-2024-42294}
- gpio: prevent potential speculation leaks in gpio_device_get_desc() (CKI Backport Bot) [RHEL-56213] {CVE-2024-44931}
- redhat: hmac sign the UKI for FIPS (Vitaly Kuznetsov)
- Also make vmlinuz-virt.efi world readable (Vitaly Kuznetsov)
- ice: fix truesize operations for PAGE_SIZE >= 8192 (Petr Oros) [RHEL-37905]
- ice: fix ICE_LAST_OFFSET formula (Petr Oros) [RHEL-37905]
- ice: fix page reuse when PAGE_SIZE is over 8k (Petr Oros) [RHEL-37905]
- usb: cdns3: Fix spelling mistake "supporte" -> "supported" (Martin McConnell) [RHEL-54566]
- usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix memory double free when handle zero packet (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers (Martin McConnell) [RHEL-54566]
- usb: cdnsp: blocked some cdns3 specific code (Martin McConnell) [RHEL-54566]
- usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix iso transfer error when mult is not zero (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix uvc failure work since sg support enabled (Martin McConnell) [RHEL-54566]
- usb: cdns3: Use dev_err_probe (Martin McConnell) [RHEL-54566]
- usb: cdns3: starfive: don't misuse /** comment (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Replace snprintf() with the safer scnprintf() variant (Martin McConnell) [RHEL-54566]
- usb: cdns3: skip set TRB_IOC when usb_request: no_interrupt is true (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fix deadlock issue during using NCM gadget (Martin McConnell) [RHEL-54566]
- usb:cdnsp: remove TRB_FLUSH_ENDPOINT command (Martin McConnell) [RHEL-54566]
- usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes issue with dequeuing not queued requests (Martin McConnell) [RHEL-54566]
- usb: cdns3: Add PHY mode switch to usb2 PHY (Martin McConnell) [RHEL-54566]
- usb: cdns3: starfive: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3: Put the cdns set active part outside the spin lock (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config (Martin McConnell) [RHEL-54566]
- usb: cdns3: imx: Rework system PM to avoid duplicated operations (Martin McConnell) [RHEL-54566]
- usb: cdns3: optimize OUT transfer by copying only actual received data (Martin McConnell) [RHEL-54566]
- usb: cdns3: improve handling of unaligned address case (Martin McConnell) [RHEL-54566]
- usb: cdns3: Add StarFive JH7110 USB driver (Martin McConnell) [RHEL-54566]
- usb: cdns3: imx: simplify clock name usage (Martin McConnell) [RHEL-54566]
- usb: cdns3: fix NCM gadget RX speed 20x slow than expection at iMX8QM (Martin McConnell) [RHEL-54566]
- usb: cdns3-ti: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3-plat: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdns3-imx: Convert to platform remove callback returning void (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes error: uninitialized symbol 'len' (Martin McConnell) [RHEL-54566]
- usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver (Martin McConnell) [RHEL-54566]
- usb: cdns3: Fix issue with using incorrect PCI device function (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fixes issue with redundant Status Stage (Martin McConnell) [RHEL-54566]
- usb: cdns3: change some trace event __dynamic_array() to __get_buf() (Martin McConnell) [RHEL-54566]
- usb: cdns3: change trace event cdns3_ring() operation (Martin McConnell) [RHEL-54566]
- usb: cdnsp: : add scatter gather support for ISOC endpoint (Martin McConnell) [RHEL-54566]
- usb: cdns3: remove fetched trb from cache before dequeuing (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fix lack of ZLP for ep0 (Martin McConnell) [RHEL-54566]
- usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1 (Martin McConnell) [RHEL-54566]
- usb: cdnsp: Fix issue with Clear Feature Halt Endpoint (Martin McConnell) [RHEL-54566]
- usb: cdns3: host: fix endless superspeed hub port reset (Martin McConnell) [RHEL-54566]
- usb: cdns3: adjust the partial logic of cdnsp_pci_remove (Martin McConnell) [RHEL-54566]
- usb: cdns3: remove dead code (Martin McConnell) [RHEL-54566]
- Bluetooth: MGMT: Add error handling to pair_device() (CKI Backport Bot) [RHEL-56148] {CVE-2024-43884}
- PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal (Myron Stowe) [RHEL-54981] {CVE-2024-42302}
- ASoC: TAS2781: Fix tasdev_load_calibrated_data() (CKI Backport Bot) [RHEL-55177] {CVE-2024-42278}
- cgroup/cpuset: Prevent UAF in proc_cpuset_show() (Waiman Long) [RHEL-54775 RHEL-54779] {CVE-2024-43853}
- net: add and use __skb_get_hash_symmetric_net (Hangbin Liu) [RHEL-54921]
- net: add and use skb_get_hash_net (Hangbin Liu) [RHEL-54921]
- net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE (CKI Backport Bot) [RHEL-54921] {CVE-2024-42321}
- ice: Adjust PTP init for 2x50G E825C devices (Petr Oros) [RHEL-29210]
- ice: Add NAC Topology device capability parser (Petr Oros) [RHEL-29210]
- ice: Add support for E825-C TS PLL handling (Petr Oros) [RHEL-29210]
- ice: Change CGU regs struct to anonymous (Petr Oros) [RHEL-29210]
- ice: Introduce ETH56G PHY model for E825C products (Petr Oros) [RHEL-29210]
- ice: Introduce ice_get_base_incval() helper (Petr Oros) [RHEL-29210]
- ice: Move CGU block (Petr Oros) [RHEL-29210]
- ice: Add PHY OFFSET_READY register clearing (Petr Oros) [RHEL-29210]
- ice: Implement Tx interrupt enablement functions (Petr Oros) [RHEL-29210]
- ice: Introduce helper to get tmr_cmd_reg values (Petr Oros) [RHEL-29210]
- ice: Introduce ice_ptp_hw struct (Petr Oros) [RHEL-29210]
- Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout (CKI Backport Bot) [RHEL-17953 RHEL-36378] {CVE-2024-27398}
- Bluetooth: btintel: Fixe build regression (Bastien Nocera) [RHEL-37353] {CVE-2024-35933}
- Bluetooth: btintel: Fix null ptr deref in btintel_read_version (CKI Backport Bot) [RHEL-37353] {CVE-2024-35933}
- Bluetooth: fix connection setup in l2cap_connect (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: HCI: Remove HCI_AMP support (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove HCI_POWER_OFF_TIMEOUT (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: hci_event: Remove code to removed CONFIG_BT_HS (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove usage of the deprecated ida_simple_xx() API (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: Remove BT_HS (Bastien Nocera) [RHEL-38459] {CVE-2024-36013}
- Bluetooth: qca: add missing firmware sanity checks (CKI Backport Bot) [RHEL-39643] {CVE-2024-36880}
- Bluetooth: hci_sock: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37411] {CVE-2024-35963}
- Bluetooth: SCO: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37396] {CVE-2024-35967}
- Bluetooth: L2CAP: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37404] {CVE-2024-35965}
- Bluetooth: ISO: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37406] {CVE-2024-35964}
- Bluetooth: RFCOMM: Fix not validating setsockopt user input (Bastien Nocera) [RHEL-37400] {CVE-2024-35966}
- Bluetooth: Fix memory leak in hci_req_sync_complete() (CKI Backport Bot) [RHEL-37378] {CVE-2024-35978}
- Bluetooth: msft: fix slab-use-after-free in msft_do_close() (CKI Backport Bot) [RHEL-38463] {CVE-2024-36012}
- rtc: tps6594: Fix memleak in probe (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 pfsm (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 esm (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 rtc drv (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 regulator (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 pinctrl (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 spi (Joel Slebodnick) [RHEL-45915]
- redhat/configs: add config file for tps6594 i2c (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Correct multi-phase configuration (Joel Slebodnick) [RHEL-45915]
- rtc: tps6594: Add driver for TPS6594 RTC (Joel Slebodnick) [RHEL-45915]
- pinctrl: tps6594: Add driver for TPS6594 pinctrl and GPIOs (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Fix random kernel crash (Joel Slebodnick) [RHEL-45915]
- misc: tps6594: Remove redundant dev_err_probe() for platform_get_irq_byname() (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Disable ESM for rev 1 PMIC (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Convert to platform remove callback returning void (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-pfsm: Convert to platform remove callback returning void (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-pfsm: Add driver for TI TPS6594 PFSM (Joel Slebodnick) [RHEL-45915]
- misc: tps6594-esm: Add driver for TI TPS6594 ESM (Joel Slebodnick) [RHEL-45915]
- regulator: tps6594-regulator: Add driver for TI TPS6594 regulators (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Add null pointer check to tps6594_device_init() (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Fix an error code in probe() (Joel Slebodnick) [RHEL-45915]
- mfd: tps6594: Add driver for TI TPS6594 PMIC (Joel Slebodnick) [RHEL-45915]
- mfd: tps80031: Remove driver (Joel Slebodnick) [RHEL-45915]
- dt-bindings: mfd: Add TI TPS6594 PMIC (Joel Slebodnick) [RHEL-45915]
- x86/mce: Implement recovery for errors in TDX/SEAM non-root mode (David Arcari) [RHEL-28497]

* Fri Sep 06 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-506.el9]
- powercap: idle_inject: Simplify if condition (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Switch to new Intel CPU model defines (David Arcari) [RHEL-53594]
- powercap: intel_rapl_msr: Switch to new Intel CPU model defines (David Arcari) [RHEL-53594]
- powercap: intel_rapl_tpmi: Enable PMU support (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Introduce APIs for PMU support (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Sort header files (David Arcari) [RHEL-53594]
- powercap: intel_rapl: Add support for ArrowLake-H platform (David Arcari) [RHEL-53594]
- Update 9.6 selt-tests (Lucas Zampieri)

* Wed Sep 04 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-505.el9]
- PCI: Revert the cfg_access_lock lockdep mechanism (Myron Stowe) [RHEL-50255]
- PCI: Make pcie_bandwidth_capable() static (Myron Stowe) [RHEL-50255]
- x86/pci: Remove OLPC dead code (Myron Stowe) [RHEL-50255]
- PCI: Clean up accessor macro formatting (Myron Stowe) [RHEL-50255]
- PCI/ERR: Cleanup misleading indentation inside if conditions (Myron Stowe) [RHEL-50255]
- PCI: Annotate pci_cache_line_size variables as __ro_after_init (Myron Stowe) [RHEL-50255]
- PCI: Constify pcibus_class (Myron Stowe) [RHEL-50255]
- Revert "genirq/msi: Provide constants for PCI/IMS support" (Myron Stowe) [RHEL-50255]
- Revert "x86/apic/msi: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "iommu/vt-d: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "iommu/amd: Enable PCI/IMS" (Myron Stowe) [RHEL-50255]
- Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" (Myron Stowe) [RHEL-50255]
- Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()" (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Clean up pci_epf_test_unbind() (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Simplify pci_epf_test_set_bar() loop (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Remove superfluous code (Myron Stowe) [RHEL-50255]
- PCI: endpoint: Allocate a 64-bit BAR if that is the only option (Myron Stowe) [RHEL-50255]
- PCI: endpoint: pci-epf-test: Simplify pci_epf_test_alloc_space() loop (Myron Stowe) [RHEL-50255]
- PCI: tegra194: Fix probe path for Endpoint mode (Myron Stowe) [RHEL-50255]
- PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id (Myron Stowe) [RHEL-50255]
- PCI: rockchip-ep: Set a 64-bit BAR if requested (Myron Stowe) [RHEL-50255]
- PCI: mt7621: Fix string truncation in mt7621_pcie_parse_port() (Myron Stowe) [RHEL-50255]
- PCI: endpoint: Remove "core_init_notifier" flag (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST# (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Add Kernel-doc comments for APIs (Myron Stowe) [RHEL-50255]
- PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host (Myron Stowe) [RHEL-50255]
- PCI: cadence: Set a 64-bit BAR if requested (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: layerscape-pci: Convert to YAML format (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: mediatek,mt7621: Add missing child node reg (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and pci-bus.yaml (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,am65: Fix remaining binding warnings (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC (Myron Stowe) [RHEL-50255]
- PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports (Myron Stowe) [RHEL-50255]
- PCI: of_property: Return error for int_map allocation failure (Myron Stowe) [RHEL-50255]
- PCI/MSI: Make error path handling follow the standard pattern (Myron Stowe) [RHEL-50255]
- PCI: hotplug: Remove obsolete sgi_hotplug TODO notes (Myron Stowe) [RHEL-50255]
- PCI: hotplug: Document unchecked return value of pci_hp_add_bridge() (Myron Stowe) [RHEL-50255]
- PCI: Do not wait for disconnected devices when resuming (Myron Stowe) [RHEL-50255]
- x86/pci: Skip early E820 check for ECAM region (Myron Stowe) [RHEL-50255]
- PCI: Remove unused pci_enable_device_io() (Myron Stowe) [RHEL-50255]
- ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() (Myron Stowe) [RHEL-50255]
- PCI: Update pci_find_capability() stub return types (Myron Stowe) [RHEL-50255]
- PCI: Remove PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- wifi: ath10k: Refer to INTX instead of LEGACY (Myron Stowe) [RHEL-50255]
- r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use (Myron Stowe) [RHEL-50255]
- RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY (Myron Stowe) [RHEL-50255]
- PCI: Clarify intent of LT wait (Myron Stowe) [RHEL-50255]
- PCI: Wait for Link Training==0 before starting Link retrain (Myron Stowe) [RHEL-50255]
- PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3 (Myron Stowe) [RHEL-50255]
- PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3 (Myron Stowe) [RHEL-50255]
- PCI/DOE: Support discovery version 2 (Myron Stowe) [RHEL-50255]
- PCI: Lock upstream bridge for pci_reset_function() (Myron Stowe) [RHEL-50255]
- PCI/ASPM: Clean up ASPM disable/enable mask calculation (Myron Stowe) [RHEL-50255]
- PCI/ASPM: Consolidate link state defines (Myron Stowe) [RHEL-50255]
- PCI/AER: Update aer-inject tool source URL (Myron Stowe) [RHEL-50255]
- PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controller (Myron Stowe) [RHEL-50255]
- of: unittest: Add tests for address translations (Myron Stowe) [RHEL-50255]
- of: address: Fix address translation when address-size is greater than 2 (Myron Stowe) [RHEL-50255]
- PCI: of: Destroy changeset when adding PCI device node fails (Myron Stowe) [RHEL-50255]
- PCI: of_property: Handle interrupt parsing failures (Myron Stowe) [RHEL-50255]
- PCI: Create device tree node for bridge (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: Drop unneeded quotes (Myron Stowe) [RHEL-50255]
- PCI/DOE: Relax restrictions on request and response size (Myron Stowe) [RHEL-50255]
- PCI/DOE: Make mailbox creation API private (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: ti,j721e-pci-host: Simplify 'device-id' schema (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: cdns-ep: Fix 'unevaluatedProperties' warnings (Myron Stowe) [RHEL-50255]
- dt-bindings: PCI: Fix 'unevaluatedProperties' warnings (Myron Stowe) [RHEL-50255]
- ptp: annotate data-race around q->head and q->tail (Hangbin Liu) [RHEL-38600]
- Input: gpio_keys_polled - suppress deferred probe error for gpio (Luiz Capitulino) [RHEL-52234]
- Input: gpio_keys_polled - simplify with dev_err_probe() (Luiz Capitulino) [RHEL-52234]
- redhat/configs: enable CONFIG_KEYBOARD_GPIO_POLLED driver (Luiz Capitulino) [RHEL-52234]
- net/smc: reduce rtnl pressure in smc_pnet_create_pnetids_list() (Mete Durlu) [RHEL-37349] {CVE-2024-35934}
- net/iucv: fix use after free in iucv_sock_close() (Mete Durlu) [RHEL-53992]
- tools/virtio: Add dma sync api for virtio test (Eric Auger) [RHEL-3230]
- virtio_ring: fix syncs DMA memory with different direction (Eric Auger) [RHEL-3230]
- virtio: packed: fix unmap leak for indirect desc table (Eric Auger) [RHEL-3230]
- virtio_net: fix missing dma unmap for resize (Eric Auger) [RHEL-3230]
- virtio_net: avoid data-races on dev->stats fields (Eric Auger) [RHEL-3230]
- virtio_net: fix the missing of the dma cpu sync (Eric Auger) [RHEL-3230]
- virtio_net: merge dma operations when filling mergeable buffers (Eric Auger) [RHEL-3230]
- virtio_ring: introduce dma sync api for virtqueue (Eric Auger) [RHEL-3230]
- virtio_ring: introduce dma map api for virtqueue (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_reset() (Eric Auger) [RHEL-3230]
- virtio_ring: separate the logic of reset/enable from virtqueue_resize (Eric Auger) [RHEL-3230]
- virtio_ring: correct the expression of the description of virtqueue_resize() (Eric Auger) [RHEL-3230]
- virtio_ring: skip unmap for premapped (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_dma_dev() (Eric Auger) [RHEL-3230]
- virtio_ring: support add premapped buf (Eric Auger) [RHEL-3230]
- virtio_ring: introduce virtqueue_set_dma_premapped() (Eric Auger) [RHEL-3230]
- virtio_ring: put mapping error check in vring_map_one_sg (Eric Auger) [RHEL-3230]
- virtio_ring: check use_dma_api before unmap desc for indirect (Eric Auger) [RHEL-3230]
- s390/dasd: fix error recovery leading to data corruption on ESE devices (Mete Durlu) [RHEL-55873]

* Mon Sep 02 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-504.el9]
- Bump RHEL MINOR to 9.6 (Rado Vrbovsky)
- block: initialize integrity buffer to zero before writing it to media (Ming Lei) [RHEL-54768] {CVE-2024-43854}
- perf/x86/amd/uncore: Fix DF and UMC domain identification (David Arcari) [RHEL-43147]
- x86/mm/numa: Move early mptable evaluation into common code (David Arcari) [RHEL-43147]
- x86/cpu: Move leftover contents of topology.c to setup.c (David Arcari) [RHEL-43147]
- x86/topology: convert to use arch_cpu_is_hotpluggable() (David Arcari) [RHEL-43147]
- x86/topology: use weak version of arch_unregister_cpu() (David Arcari) [RHEL-43147]
- x86/topology: Switch over to GENERIC_CPU_DEVICES (David Arcari) [RHEL-43147]
- x86/topology: remove arch_*register_cpu() exports (David Arcari) [RHEL-43147]
- x86/topology/intel: Unlock CPUID before evaluating anything (David Arcari) [RHEL-43147]
- x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater (David Arcari) [RHEL-43147]
- x86/topology: Handle bogus ACPI tables correctly (David Arcari) [RHEL-43147]
- x86/topology/amd: Ensure that LLC ID is initialized (David Arcari) [RHEL-43147]
- x86/xen: return a sane initial apic id when running as PV guest (David Arcari) [RHEL-43147]
- x86/cpu/amd: Move TOPOEXT enablement into the topology parser (David Arcari) [RHEL-43147]
- x86/cpu/amd: Make the NODEID_MSR union actually work (David Arcari) [RHEL-43147]
- x86/cpu/amd: Make the CPUID 0x80000008 parser correct (David Arcari) [RHEL-43147]
- x86/topology: Don't update cpu_possible_map in topo_set_cpuids() (David Arcari) [RHEL-43147]
- x86/topology: Handle the !APIC case gracefully (David Arcari) [RHEL-43147]
- x86/topology: Don't evaluate logical IDs during early boot (David Arcari) [RHEL-43147]
- x86/cpu/topology: Add support for the AMD 0x80000026 leaf (David Arcari) [RHEL-43147]
- x86/topology: Ignore non-present APIC IDs in a present package (David Arcari) [RHEL-43147]
- x86/apic: Build the x86 topology enumeration functions on UP APIC builds too (David Arcari) [RHEL-43147]
- x86/cpu/topology: Get rid of cpuinfo::x86_max_cores (David Arcari) [RHEL-43147]
- docs: move x86 documentation into Documentation/arch/ [partial] (David Arcari) [RHEL-43147]
- x86/cpu: Remove x86_coreid_bits (David Arcari) [RHEL-43147]
- x86/mm/numa: Use core domain size on AMD (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide __num_[cores|threads]_per_package (David Arcari) [RHEL-43147]
- x86/cpu/topology: Rename smp_num_siblings (David Arcari) [RHEL-43147]
- arch/x86/kernel/setup.c: fixup rh_check_supported (David Arcari) [RHEL-43147]
- x86/cpu/topology: Retrieve cores per package from topology bitmaps (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use topology logical mapping mechanism (David Arcari) [RHEL-43147]
- x86/smpboot: Change smp_store_boot_cpu_info() to static (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide logical pkg/die mapping (David Arcari) [RHEL-43147]
- x86/cpu/topology: Simplify cpu_mark_primary_thread() (David Arcari) [RHEL-43147]
- x86/cpu/topology: Mop up primary thread mask handling (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use topology bitmaps for sizing (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Register the boot CPU APIC properly (David Arcari) [RHEL-43147]
- x86/cpu/topology: Let XEN/PV use topology from CPUID/MADT (David Arcari) [RHEL-43147]
- x86/acpi: Dont invoke topology_register_apic() for XEN PV (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Count number of vCPUs early (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Register fake APICs (David Arcari) [RHEL-43147]
- x86/mpparse: Switch to new init callbacks (David Arcari) [RHEL-43147]
- x86/mpparse: Provide separate early/late callbacks (David Arcari) [RHEL-43147]
- x86/dtb: Rename x86_dtb_init() (David Arcari) [RHEL-43147]
- x86/mpparse: Prepare for callback separation (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Prepare for separate mpparse callbacks (David Arcari) [RHEL-43147]
- x86/mpparse: Rename default_find_smp_config() (David Arcari) [RHEL-43147]
- x86/xen/smp_pv: Remove cpudata fiddling (David Arcari) [RHEL-43147]
- x86/cpu/topology: Assign hotpluggable CPUIDs during init (David Arcari) [RHEL-43147]
- x86/cpu/topology: Reject unknown APIC IDs on ACPI hotplug (David Arcari) [RHEL-43147]
- x86/topology: Add a mechanism to track topology via APIC IDs (David Arcari) [RHEL-43147]
- x86/cpu: Detect real BSP on crash kernels (David Arcari) [RHEL-43147]
- x86/cpu/topology: Rework possible CPU management (David Arcari) [RHEL-43147]
- x86/cpu/topology: Sanitize the APIC admission logic (David Arcari) [RHEL-43147]
- x86/cpu/topology: Use a data structure for topology info (David Arcari) [RHEL-43147]
- x86/cpu/topology: Simplify APIC registration (David Arcari) [RHEL-43147]
- x86/cpu/topology: Confine topology information (David Arcari) [RHEL-43147]
- x86/mpparse: Use new APIC registration function (David Arcari) [RHEL-43147]
- x86/acpi: Use new APIC registration functions (David Arcari) [RHEL-43147]
- x86/cpu/topology: Provide separate APIC registration functions (David Arcari) [RHEL-43147]
- x86/cpu/topology: Move registration out of APIC code (David Arcari) [RHEL-43147]
- x86/apic/msi: Use DOMAIN_BUS_GENERIC_MSI for HPET/IO-APIC domain search (David Arcari) [RHEL-43147]
- x86/apic: Use a proper define for invalid ACPI CPU ID (David Arcari) [RHEL-43147]
- x86/apic: Remove yet another dubious callback (David Arcari) [RHEL-43147]
- x86/apic: Remove the pointless writeback of boot_cpu_physical_apicid (David Arcari) [RHEL-43147]
- x86/mpparse: Remove the physid_t bitmap wrapper (David Arcari) [RHEL-43147]
- x86/apic: Remove check_apicid_used() and ioapic_phys_id_map() (David Arcari) [RHEL-43147]
- x86/ioapic: Simplify setup_ioapic_ids_from_mpc_nocheck() (David Arcari) [RHEL-43147]
- x86/ioapic: Make io_apic_get_unique_id() simpler (David Arcari) [RHEL-43147]
- x86/apic: Get rid of get_physical_broadcast() (David Arcari) [RHEL-43147]
- x86/ioapic: Replace some more set bit nonsense (David Arcari) [RHEL-43147]
- x86/platform/ce4100: Dont override x86_init.mpparse.setup_ioapic_ids (David Arcari) [RHEL-43147]
- x86/apic: Remove unused phys_pkg_id() callback (David Arcari) [RHEL-43147]
- arch/x86: Fix typos (David Arcari) [RHEL-43147]
- x86/cpu/topology: Make the APIC mismatch warnings complete (David Arcari) [RHEL-43147]
- x86/cpu: Remove topology.c (David Arcari) [RHEL-43147]
- x86/cpu: Make topology_amd_node_id() use the actual node info (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for HYGON (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for AMD (David Arcari) [RHEL-43147]
- x86/cpu: Provide an AMD/HYGON specific topology parser (David Arcari) [RHEL-43147]
- x86/cpu: Provide cpuid_read() et al. (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for Intel (David Arcari) [RHEL-43147]
- x86/cpu: Provide a sane leaf 0xb/0x1f parser (David Arcari) [RHEL-43147]
- x86/cpu: Move __max_die_per_package to common.c (David Arcari) [RHEL-43147]
- x86/cpu: Use common topology code for Centaur and Zhaoxin (David Arcari) [RHEL-43147]
- x86/cpu: Add legacy topology parser (David Arcari) [RHEL-43147]
- x86/cpu: Provide cpu_init/parse_topology() (David Arcari) [RHEL-43147]
- drivers: base: Move cpu_dev_init() after node_dev_init() (David Arcari) [RHEL-43147]
- base/node.c: initialize the accessor list before registering (David Arcari) [RHEL-43147]
- Revert "x86/topology: Fix max_siblings calculation for some hybrid cpus" (David Arcari) [RHEL-43147]


###
# The following Emacs magic makes C-c C-e use UTC dates.
# Local Variables:
# rpm-change-log-uses-utc: t
# End:
###