kernel/Makefile.rhelver
Herton R. Krzesinski bebb6cbbf7 kernel-5.14.0-236.el9
* Mon Jan 16 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-236.el9]
- Revert "nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH" (Ewan D. Milne) [2140810]
- vmxnet3: correctly report csum_level for encapsulated packet (Izabela Bakollari) [2158807]
- cpu/hotplug: Set cpuhp target for boot cpu (Phil Auld) [2086305]
- cpu/hotplug: Make target_store() a nop when target == state (Phil Auld) [2086305]
- scsi: target: core: Fix hard lockup when executing a compare-and-write command (Maurizio Lombardi) [2153690]
- ceph: rely on vfs for setgid stripping (Andrey Albershteyn) [2128900]
- fs: move S_ISGID stripping into the vfs_*() helpers (Andrey Albershteyn) [2128898 2128900]
- fs: Add missing umask strip in vfs_tmpfile (Andrey Albershteyn) [2128898 2128900]
- fs: add mode_strip_sgid() helper (Andrey Albershteyn) [2128898 2128900]
- tracing: Add linear buckets to histogram logic (Jerome Marchand) [2143635]
- disable CONFIG_INTEL_MEI_PXP (Jocelyn Falempe) [2147558]
- mei: pxp: support matching with a gfx discrete card (Jocelyn Falempe) [2147558]
- mei: pxp: add command streamer API to the PXP driver (Jocelyn Falempe) [2147558]
- mei: bus: extend bus API to support command streamer API (Jocelyn Falempe) [2147558]
- mei: adjust extended header kdocs (Jocelyn Falempe) [2147558]
- mei: bus: enable sending gsc commands (Jocelyn Falempe) [2147558]
- mei: add support to GSC extended header (Jocelyn Falempe) [2147558]
- mei: debugfs: add pxp mode to devstate in debugfs (Jocelyn Falempe) [2147558]
- mei: drop ready bits check after start (Jocelyn Falempe) [2147558]
- mei: gsc: add transition to PXP mode in resume flow (Jocelyn Falempe) [2147558]
- mei: gsc: setup gsc extended operational memory (Jocelyn Falempe) [2147558]
- mei: mkhi: add memory ready command (Jocelyn Falempe) [2147558]
- mei: bus: export common mkhi definitions into a separate header (Jocelyn Falempe) [2147558]
- mei: extend timeouts on slow devices (Jocelyn Falempe) [2147558]
- mei: gsc: wait for reset thread on stop (Jocelyn Falempe) [2147558]
- mei: gsc: use polling instead of interrupts (Jocelyn Falempe) [2147558]
- mei: add slow_firmware flag to the mei auxiliary device (Jocelyn Falempe) [2147558]
- mei: add kdoc for struct mei_aux_device (Jocelyn Falempe) [2147558]
- mei: me: fix clang -Wformat warning (Jocelyn Falempe) [2147558]
- mei: me: add raptor lake point S DID (Jocelyn Falempe) [2147558]
- mei: hbm: drop capability response on early shutdown (Jocelyn Falempe) [2147558]
- mei: me: set internal pg flag to off on hardware reset (Jocelyn Falempe) [2147558]
- misc/mei: Add NULL check to component match callback functions (Jocelyn Falempe) [2147558]
- drm/display: Move HDCP helpers into display-helper module (Jocelyn Falempe) [2147558]
- mei: avoid iterator usage outside of list_for_each_entry (Jocelyn Falempe) [2147558]
- mei: do not overwrite state on hw start (Jocelyn Falempe) [2147558]
- mei: me: fix reset policy on read error in interrupt (Jocelyn Falempe) [2147558]
- mei: me: avoid link reset on shutdown (Jocelyn Falempe) [2147558]
- mei: me: Use dma_set_mask_and_coherent() and simplify code (Jocelyn Falempe) [2147558]
- mei: hbm: fix client dma reply status (Jocelyn Falempe) [2147558]
- mei: cleanup status before client dma setup call (Jocelyn Falempe) [2147558]
- mei: add POWERING_DOWN into device state print (Jocelyn Falempe) [2147558]
- mei: Remove some dead code (Jocelyn Falempe) [2147558]
- mei: bus: add client dma interface (Jocelyn Falempe) [2147558]
- mei: hbm: drop hbm responses on early shutdown (Jocelyn Falempe) [2147558]
- mei: pxp: export pavp client to me client bus (Jocelyn Falempe) [2147558]
- mei: Remove usage of the deprecated "pci-dma-compat.h" API (Jocelyn Falempe) [2147558]
- mei: constify passed buffers and structures (Jocelyn Falempe) [2147558]
Resolves: rhbz#2140810, rhbz#2158807, rhbz#2086305, rhbz#2153690, rhbz#2128900, rhbz#2128898, rhbz#2143635, rhbz#2147558

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
2023-01-16 16:22:21 +00:00

68 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 2
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 236
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif