aa5ab7f890
* Mon Jul 13 2020 Fedora Kernel Team <kernel-team@fedoraproject.org> [5.8.0-0.rc5.1] - v5.8-rc5 rebase - arm64: dts: sun50i-a64-pinephone: Add touchscreen support (Ondrej Jirman) - arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone (Icenowy Zheng) - drm/panel: st7703: Assert reset prior to powering down the regulators (Ondrej Jirman) - drm/panel: st7703: Enter sleep after display off (Ondrej Jirman) - drm/panel: st7703: Add support for Xingbangda XBD599 (Ondrej Jirman) - drm/panel: st7703: Move generic part of init sequence to enable callback (Ondrej Jirman) - drm/panel: st7703: Move code specific to jh057n closer together (Ondrej Jirman) - drm/panel: st7703: Prepare for supporting multiple panels (Ondrej Jirman) - drm/panel: st7703: Rename functions from jh057n prefix to st7703 (Ondrej Jirman) - drm/panel: rocktech-jh057n00900: Rename the driver to st7703 (Ondrej Jirman) - dt-bindings: panel: Add compatible for Xingbangda XBD599 panel (Ondrej Jirman) - dt-bindings: panel: Convert rocktech, jh057n00900 to yaml (Ondrej Jirman) - dt-bindings: vendor-prefixes: Add Xingbangda (Icenowy Zheng) - Revert "arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone" (Peter Robinson) - Revert "drm/sun4i: sun6i_mipi_dsi: fix horizontal timing calculation" (Peter Robinson) - Revert "drm: panel: add Xingbangda XBD599 panel" (Peter Robinson) - Revert "dt-bindings: panel: add binding for Xingbangda XBD599 panel" (Peter Robinson) - selinux: allow reading labels before policy is loaded (Jonathan Lebon) - Fixes "acpi: prefer booting with ACPI over DTS" to be RHEL only (Peter Robinson) - Update config for renamed panel driver. (Peter Robinson) - Enable SERIAL_SC16IS7XX for SPI interfaces (Peter Robinson) - Updated changelog for the release based on dcde237b9b0e (Fedora Kernel Team) Resolves: rhbz# Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
949 lines
27 KiB
Diff
949 lines
27 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Fri, 26 Jun 2020 02:55:52 +0200
|
|
Subject: [PATCH] drm/panel: rocktech-jh057n00900: Rename the driver to st7703
|
|
|
|
This rename is done so that the driver matches the name of the
|
|
display controller and in preparation for adding support for more
|
|
panels to the driver.
|
|
|
|
This is just a basic file rename, with no code changes.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
---
|
|
drivers/gpu/drm/panel/Kconfig | 26 +-
|
|
drivers/gpu/drm/panel/Makefile | 2 +-
|
|
.../drm/panel/panel-rocktech-jh057n00900.c | 424 ------------------
|
|
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 424 ++++++++++++++++++
|
|
4 files changed, 438 insertions(+), 438 deletions(-)
|
|
delete mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
|
|
create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
|
|
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
|
|
index 39055c1f0e2f..de2f2a452be5 100644
|
|
--- a/drivers/gpu/drm/panel/Kconfig
|
|
+++ b/drivers/gpu/drm/panel/Kconfig
|
|
@@ -283,19 +283,6 @@ config DRM_PANEL_RAYDIUM_RM68200
|
|
Say Y here if you want to enable support for Raydium RM68200
|
|
720x1280 DSI video mode panel.
|
|
|
|
-config DRM_PANEL_ROCKTECH_JH057N00900
|
|
- tristate "Rocktech JH057N00900 MIPI touchscreen panel"
|
|
- depends on OF
|
|
- depends on DRM_MIPI_DSI
|
|
- depends on BACKLIGHT_CLASS_DEVICE
|
|
- help
|
|
- Say Y here if you want to enable support for Rocktech JH057N00900
|
|
- MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
|
|
- resolution of 720x1440 pixels, a built in backlight and touch
|
|
- controller.
|
|
- Touch input support is provided by the goodix driver and needs to be
|
|
- selected separately.
|
|
-
|
|
config DRM_PANEL_RONBO_RB070D30
|
|
tristate "Ronbo Electronics RB070D30 panel"
|
|
depends on OF
|
|
@@ -395,6 +382,19 @@ config DRM_PANEL_SITRONIX_ST7701
|
|
ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
|
|
system interfaces.
|
|
|
|
+config DRM_PANEL_SITRONIX_ST7703
|
|
+ tristate "Sitronix ST7703 based MIPI touchscreen panels"
|
|
+ depends on OF
|
|
+ depends on DRM_MIPI_DSI
|
|
+ depends on BACKLIGHT_CLASS_DEVICE
|
|
+ help
|
|
+ Say Y here if you want to enable support for Sitronix ST7703 based
|
|
+ panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
|
|
+ the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
|
|
+ in backlight and touch controller.
|
|
+ Touch input support is provided by the goodix driver and needs to be
|
|
+ selected separately.
|
|
+
|
|
config DRM_PANEL_SITRONIX_ST7789V
|
|
tristate "Sitronix ST7789V panel"
|
|
depends on OF && SPI
|
|
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
|
|
index de74f282c433..e45ceac6286f 100644
|
|
--- a/drivers/gpu/drm/panel/Makefile
|
|
+++ b/drivers/gpu/drm/panel/Makefile
|
|
@@ -27,7 +27,6 @@ obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
|
|
obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
|
|
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM67191) += panel-raydium-rm67191.o
|
|
obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o
|
|
-obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o
|
|
obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o
|
|
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
|
|
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
|
|
@@ -41,6 +40,7 @@ obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
|
|
obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
|
|
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
|
|
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
|
|
+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
|
|
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
|
|
obj-$(CONFIG_DRM_PANEL_SONY_ACX424AKP) += panel-sony-acx424akp.o
|
|
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
|
|
diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
|
|
deleted file mode 100644
|
|
index 38ff742bc120..000000000000
|
|
--- a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
|
|
+++ /dev/null
|
|
@@ -1,424 +0,0 @@
|
|
-// SPDX-License-Identifier: GPL-2.0
|
|
-/*
|
|
- * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
|
|
- *
|
|
- * Copyright (C) Purism SPC 2019
|
|
- */
|
|
-
|
|
-#include <linux/debugfs.h>
|
|
-#include <linux/delay.h>
|
|
-#include <linux/gpio/consumer.h>
|
|
-#include <linux/media-bus-format.h>
|
|
-#include <linux/mod_devicetable.h>
|
|
-#include <linux/module.h>
|
|
-#include <linux/regulator/consumer.h>
|
|
-
|
|
-#include <video/display_timing.h>
|
|
-#include <video/mipi_display.h>
|
|
-
|
|
-#include <drm/drm_mipi_dsi.h>
|
|
-#include <drm/drm_modes.h>
|
|
-#include <drm/drm_panel.h>
|
|
-#include <drm/drm_print.h>
|
|
-
|
|
-#define DRV_NAME "panel-rocktech-jh057n00900"
|
|
-
|
|
-/* Manufacturer specific Commands send via DSI */
|
|
-#define ST7703_CMD_ALL_PIXEL_OFF 0x22
|
|
-#define ST7703_CMD_ALL_PIXEL_ON 0x23
|
|
-#define ST7703_CMD_SETDISP 0xB2
|
|
-#define ST7703_CMD_SETRGBIF 0xB3
|
|
-#define ST7703_CMD_SETCYC 0xB4
|
|
-#define ST7703_CMD_SETBGP 0xB5
|
|
-#define ST7703_CMD_SETVCOM 0xB6
|
|
-#define ST7703_CMD_SETOTP 0xB7
|
|
-#define ST7703_CMD_SETPOWER_EXT 0xB8
|
|
-#define ST7703_CMD_SETEXTC 0xB9
|
|
-#define ST7703_CMD_SETMIPI 0xBA
|
|
-#define ST7703_CMD_SETVDC 0xBC
|
|
-#define ST7703_CMD_UNKNOWN0 0xBF
|
|
-#define ST7703_CMD_SETSCR 0xC0
|
|
-#define ST7703_CMD_SETPOWER 0xC1
|
|
-#define ST7703_CMD_SETPANEL 0xCC
|
|
-#define ST7703_CMD_SETGAMMA 0xE0
|
|
-#define ST7703_CMD_SETEQ 0xE3
|
|
-#define ST7703_CMD_SETGIP1 0xE9
|
|
-#define ST7703_CMD_SETGIP2 0xEA
|
|
-
|
|
-struct jh057n {
|
|
- struct device *dev;
|
|
- struct drm_panel panel;
|
|
- struct gpio_desc *reset_gpio;
|
|
- struct regulator *vcc;
|
|
- struct regulator *iovcc;
|
|
- bool prepared;
|
|
-
|
|
- struct dentry *debugfs;
|
|
-};
|
|
-
|
|
-static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
|
|
-{
|
|
- return container_of(panel, struct jh057n, panel);
|
|
-}
|
|
-
|
|
-#define dsi_generic_write_seq(dsi, seq...) do { \
|
|
- static const u8 d[] = { seq }; \
|
|
- int ret; \
|
|
- ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
|
|
- if (ret < 0) \
|
|
- return ret; \
|
|
- } while (0)
|
|
-
|
|
-static int jh057n_init_sequence(struct jh057n *ctx)
|
|
-{
|
|
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
- struct device *dev = ctx->dev;
|
|
- int ret;
|
|
-
|
|
- /*
|
|
- * Init sequence was supplied by the panel vendor. Most of the commands
|
|
- * resemble the ST7703 but the number of parameters often don't match
|
|
- * so it's likely a clone.
|
|
- */
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
|
|
- 0xF1, 0x12, 0x83);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
|
|
- 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
|
|
- 0x00, 0x00);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
|
|
- 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
|
|
- 0x00);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
|
|
- 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
|
|
- 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
|
|
- msleep(20);
|
|
-
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
|
|
- 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
|
|
- 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
|
|
- 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
|
|
- 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
|
|
- 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
|
|
- 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
- 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
|
|
- 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
- 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
|
|
- 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
|
|
- 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
- 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
|
|
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
|
|
- 0xA5, 0x00, 0x00, 0x00, 0x00);
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
|
|
- 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
|
|
- 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
|
|
- 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
|
|
- 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
|
|
- 0x11, 0x18);
|
|
- msleep(20);
|
|
-
|
|
- ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
- if (ret < 0) {
|
|
- DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
- return ret;
|
|
- }
|
|
- /* Panel is operational 120 msec after reset */
|
|
- msleep(60);
|
|
- ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int jh057n_enable(struct drm_panel *panel)
|
|
-{
|
|
- struct jh057n *ctx = panel_to_jh057n(panel);
|
|
- int ret;
|
|
-
|
|
- ret = jh057n_init_sequence(ctx);
|
|
- if (ret < 0) {
|
|
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
|
|
- ret);
|
|
- return ret;
|
|
- }
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int jh057n_disable(struct drm_panel *panel)
|
|
-{
|
|
- struct jh057n *ctx = panel_to_jh057n(panel);
|
|
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
-
|
|
- return mipi_dsi_dcs_set_display_off(dsi);
|
|
-}
|
|
-
|
|
-static int jh057n_unprepare(struct drm_panel *panel)
|
|
-{
|
|
- struct jh057n *ctx = panel_to_jh057n(panel);
|
|
-
|
|
- if (!ctx->prepared)
|
|
- return 0;
|
|
-
|
|
- regulator_disable(ctx->iovcc);
|
|
- regulator_disable(ctx->vcc);
|
|
- ctx->prepared = false;
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static int jh057n_prepare(struct drm_panel *panel)
|
|
-{
|
|
- struct jh057n *ctx = panel_to_jh057n(panel);
|
|
- int ret;
|
|
-
|
|
- if (ctx->prepared)
|
|
- return 0;
|
|
-
|
|
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
|
|
- ret = regulator_enable(ctx->vcc);
|
|
- if (ret < 0) {
|
|
- DRM_DEV_ERROR(ctx->dev,
|
|
- "Failed to enable vcc supply: %d\n", ret);
|
|
- return ret;
|
|
- }
|
|
- ret = regulator_enable(ctx->iovcc);
|
|
- if (ret < 0) {
|
|
- DRM_DEV_ERROR(ctx->dev,
|
|
- "Failed to enable iovcc supply: %d\n", ret);
|
|
- goto disable_vcc;
|
|
- }
|
|
-
|
|
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
- usleep_range(20, 40);
|
|
- gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
- msleep(20);
|
|
-
|
|
- ctx->prepared = true;
|
|
-
|
|
- return 0;
|
|
-
|
|
-disable_vcc:
|
|
- regulator_disable(ctx->vcc);
|
|
- return ret;
|
|
-}
|
|
-
|
|
-static const struct drm_display_mode default_mode = {
|
|
- .hdisplay = 720,
|
|
- .hsync_start = 720 + 90,
|
|
- .hsync_end = 720 + 90 + 20,
|
|
- .htotal = 720 + 90 + 20 + 20,
|
|
- .vdisplay = 1440,
|
|
- .vsync_start = 1440 + 20,
|
|
- .vsync_end = 1440 + 20 + 4,
|
|
- .vtotal = 1440 + 20 + 4 + 12,
|
|
- .vrefresh = 60,
|
|
- .clock = 75276,
|
|
- .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
- .width_mm = 65,
|
|
- .height_mm = 130,
|
|
-};
|
|
-
|
|
-static int jh057n_get_modes(struct drm_panel *panel,
|
|
- struct drm_connector *connector)
|
|
-{
|
|
- struct jh057n *ctx = panel_to_jh057n(panel);
|
|
- struct drm_display_mode *mode;
|
|
-
|
|
- mode = drm_mode_duplicate(connector->dev, &default_mode);
|
|
- if (!mode) {
|
|
- DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
|
- default_mode.hdisplay, default_mode.vdisplay,
|
|
- default_mode.vrefresh);
|
|
- return -ENOMEM;
|
|
- }
|
|
-
|
|
- drm_mode_set_name(mode);
|
|
-
|
|
- mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
- connector->display_info.width_mm = mode->width_mm;
|
|
- connector->display_info.height_mm = mode->height_mm;
|
|
- drm_mode_probed_add(connector, mode);
|
|
-
|
|
- return 1;
|
|
-}
|
|
-
|
|
-static const struct drm_panel_funcs jh057n_drm_funcs = {
|
|
- .disable = jh057n_disable,
|
|
- .unprepare = jh057n_unprepare,
|
|
- .prepare = jh057n_prepare,
|
|
- .enable = jh057n_enable,
|
|
- .get_modes = jh057n_get_modes,
|
|
-};
|
|
-
|
|
-static int allpixelson_set(void *data, u64 val)
|
|
-{
|
|
- struct jh057n *ctx = data;
|
|
- struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
-
|
|
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
|
|
- dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
|
|
- msleep(val * 1000);
|
|
- /* Reset the panel to get video back */
|
|
- drm_panel_disable(&ctx->panel);
|
|
- drm_panel_unprepare(&ctx->panel);
|
|
- drm_panel_prepare(&ctx->panel);
|
|
- drm_panel_enable(&ctx->panel);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
|
|
- allpixelson_set, "%llu\n");
|
|
-
|
|
-static void jh057n_debugfs_init(struct jh057n *ctx)
|
|
-{
|
|
- ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
|
|
-
|
|
- debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
|
|
- &allpixelson_fops);
|
|
-}
|
|
-
|
|
-static void jh057n_debugfs_remove(struct jh057n *ctx)
|
|
-{
|
|
- debugfs_remove_recursive(ctx->debugfs);
|
|
- ctx->debugfs = NULL;
|
|
-}
|
|
-
|
|
-static int jh057n_probe(struct mipi_dsi_device *dsi)
|
|
-{
|
|
- struct device *dev = &dsi->dev;
|
|
- struct jh057n *ctx;
|
|
- int ret;
|
|
-
|
|
- ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
- if (!ctx)
|
|
- return -ENOMEM;
|
|
-
|
|
- ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
- if (IS_ERR(ctx->reset_gpio)) {
|
|
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
|
|
- return PTR_ERR(ctx->reset_gpio);
|
|
- }
|
|
-
|
|
- mipi_dsi_set_drvdata(dsi, ctx);
|
|
-
|
|
- ctx->dev = dev;
|
|
-
|
|
- dsi->lanes = 4;
|
|
- dsi->format = MIPI_DSI_FMT_RGB888;
|
|
- dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
|
|
- MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
-
|
|
- ctx->vcc = devm_regulator_get(dev, "vcc");
|
|
- if (IS_ERR(ctx->vcc)) {
|
|
- ret = PTR_ERR(ctx->vcc);
|
|
- if (ret != -EPROBE_DEFER)
|
|
- DRM_DEV_ERROR(dev,
|
|
- "Failed to request vcc regulator: %d\n",
|
|
- ret);
|
|
- return ret;
|
|
- }
|
|
- ctx->iovcc = devm_regulator_get(dev, "iovcc");
|
|
- if (IS_ERR(ctx->iovcc)) {
|
|
- ret = PTR_ERR(ctx->iovcc);
|
|
- if (ret != -EPROBE_DEFER)
|
|
- DRM_DEV_ERROR(dev,
|
|
- "Failed to request iovcc regulator: %d\n",
|
|
- ret);
|
|
- return ret;
|
|
- }
|
|
-
|
|
- drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
|
|
- DRM_MODE_CONNECTOR_DSI);
|
|
-
|
|
- ret = drm_panel_of_backlight(&ctx->panel);
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
- drm_panel_add(&ctx->panel);
|
|
-
|
|
- ret = mipi_dsi_attach(dsi);
|
|
- if (ret < 0) {
|
|
- DRM_DEV_ERROR(dev,
|
|
- "mipi_dsi_attach failed (%d). Is host ready?\n",
|
|
- ret);
|
|
- drm_panel_remove(&ctx->panel);
|
|
- return ret;
|
|
- }
|
|
-
|
|
- DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
|
|
- default_mode.hdisplay, default_mode.vdisplay,
|
|
- default_mode.vrefresh,
|
|
- mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
|
|
-
|
|
- jh057n_debugfs_init(ctx);
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static void jh057n_shutdown(struct mipi_dsi_device *dsi)
|
|
-{
|
|
- struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
- int ret;
|
|
-
|
|
- ret = drm_panel_unprepare(&ctx->panel);
|
|
- if (ret < 0)
|
|
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
|
|
- ret);
|
|
-
|
|
- ret = drm_panel_disable(&ctx->panel);
|
|
- if (ret < 0)
|
|
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
|
|
- ret);
|
|
-}
|
|
-
|
|
-static int jh057n_remove(struct mipi_dsi_device *dsi)
|
|
-{
|
|
- struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
- int ret;
|
|
-
|
|
- jh057n_shutdown(dsi);
|
|
-
|
|
- ret = mipi_dsi_detach(dsi);
|
|
- if (ret < 0)
|
|
- DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
|
|
- ret);
|
|
-
|
|
- drm_panel_remove(&ctx->panel);
|
|
-
|
|
- jh057n_debugfs_remove(ctx);
|
|
-
|
|
- return 0;
|
|
-}
|
|
-
|
|
-static const struct of_device_id jh057n_of_match[] = {
|
|
- { .compatible = "rocktech,jh057n00900" },
|
|
- { /* sentinel */ }
|
|
-};
|
|
-MODULE_DEVICE_TABLE(of, jh057n_of_match);
|
|
-
|
|
-static struct mipi_dsi_driver jh057n_driver = {
|
|
- .probe = jh057n_probe,
|
|
- .remove = jh057n_remove,
|
|
- .shutdown = jh057n_shutdown,
|
|
- .driver = {
|
|
- .name = DRV_NAME,
|
|
- .of_match_table = jh057n_of_match,
|
|
- },
|
|
-};
|
|
-module_mipi_dsi_driver(jh057n_driver);
|
|
-
|
|
-MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
|
|
-MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
|
|
-MODULE_LICENSE("GPL v2");
|
|
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
new file mode 100644
|
|
index 000000000000..38ff742bc120
|
|
--- /dev/null
|
|
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
@@ -0,0 +1,424 @@
|
|
+// SPDX-License-Identifier: GPL-2.0
|
|
+/*
|
|
+ * Rockteck jh057n00900 5.5" MIPI-DSI panel driver
|
|
+ *
|
|
+ * Copyright (C) Purism SPC 2019
|
|
+ */
|
|
+
|
|
+#include <linux/debugfs.h>
|
|
+#include <linux/delay.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
+#include <linux/media-bus-format.h>
|
|
+#include <linux/mod_devicetable.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/regulator/consumer.h>
|
|
+
|
|
+#include <video/display_timing.h>
|
|
+#include <video/mipi_display.h>
|
|
+
|
|
+#include <drm/drm_mipi_dsi.h>
|
|
+#include <drm/drm_modes.h>
|
|
+#include <drm/drm_panel.h>
|
|
+#include <drm/drm_print.h>
|
|
+
|
|
+#define DRV_NAME "panel-rocktech-jh057n00900"
|
|
+
|
|
+/* Manufacturer specific Commands send via DSI */
|
|
+#define ST7703_CMD_ALL_PIXEL_OFF 0x22
|
|
+#define ST7703_CMD_ALL_PIXEL_ON 0x23
|
|
+#define ST7703_CMD_SETDISP 0xB2
|
|
+#define ST7703_CMD_SETRGBIF 0xB3
|
|
+#define ST7703_CMD_SETCYC 0xB4
|
|
+#define ST7703_CMD_SETBGP 0xB5
|
|
+#define ST7703_CMD_SETVCOM 0xB6
|
|
+#define ST7703_CMD_SETOTP 0xB7
|
|
+#define ST7703_CMD_SETPOWER_EXT 0xB8
|
|
+#define ST7703_CMD_SETEXTC 0xB9
|
|
+#define ST7703_CMD_SETMIPI 0xBA
|
|
+#define ST7703_CMD_SETVDC 0xBC
|
|
+#define ST7703_CMD_UNKNOWN0 0xBF
|
|
+#define ST7703_CMD_SETSCR 0xC0
|
|
+#define ST7703_CMD_SETPOWER 0xC1
|
|
+#define ST7703_CMD_SETPANEL 0xCC
|
|
+#define ST7703_CMD_SETGAMMA 0xE0
|
|
+#define ST7703_CMD_SETEQ 0xE3
|
|
+#define ST7703_CMD_SETGIP1 0xE9
|
|
+#define ST7703_CMD_SETGIP2 0xEA
|
|
+
|
|
+struct jh057n {
|
|
+ struct device *dev;
|
|
+ struct drm_panel panel;
|
|
+ struct gpio_desc *reset_gpio;
|
|
+ struct regulator *vcc;
|
|
+ struct regulator *iovcc;
|
|
+ bool prepared;
|
|
+
|
|
+ struct dentry *debugfs;
|
|
+};
|
|
+
|
|
+static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
|
|
+{
|
|
+ return container_of(panel, struct jh057n, panel);
|
|
+}
|
|
+
|
|
+#define dsi_generic_write_seq(dsi, seq...) do { \
|
|
+ static const u8 d[] = { seq }; \
|
|
+ int ret; \
|
|
+ ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
|
|
+ if (ret < 0) \
|
|
+ return ret; \
|
|
+ } while (0)
|
|
+
|
|
+static int jh057n_init_sequence(struct jh057n *ctx)
|
|
+{
|
|
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
+ struct device *dev = ctx->dev;
|
|
+ int ret;
|
|
+
|
|
+ /*
|
|
+ * Init sequence was supplied by the panel vendor. Most of the commands
|
|
+ * resemble the ST7703 but the number of parameters often don't match
|
|
+ * so it's likely a clone.
|
|
+ */
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
|
|
+ 0xF1, 0x12, 0x83);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
|
|
+ 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
|
|
+ 0x00, 0x00);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
|
|
+ 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
|
|
+ 0x00);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
|
|
+ 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
|
|
+ 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
|
|
+ msleep(20);
|
|
+
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
|
|
+ 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
|
|
+ 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
|
|
+ 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
|
|
+ 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
|
|
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
|
|
+ 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
+ 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
|
|
+ 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
+ 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
|
|
+ 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
|
|
+ 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
+ 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
|
|
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
|
|
+ 0xA5, 0x00, 0x00, 0x00, 0x00);
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
|
|
+ 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
|
|
+ 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
|
|
+ 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
|
|
+ 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
|
|
+ 0x11, 0x18);
|
|
+ msleep(20);
|
|
+
|
|
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
+ if (ret < 0) {
|
|
+ DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+ /* Panel is operational 120 msec after reset */
|
|
+ msleep(60);
|
|
+ ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jh057n_enable(struct drm_panel *panel)
|
|
+{
|
|
+ struct jh057n *ctx = panel_to_jh057n(panel);
|
|
+ int ret;
|
|
+
|
|
+ ret = jh057n_init_sequence(ctx);
|
|
+ if (ret < 0) {
|
|
+ DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
|
|
+ ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jh057n_disable(struct drm_panel *panel)
|
|
+{
|
|
+ struct jh057n *ctx = panel_to_jh057n(panel);
|
|
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
+
|
|
+ return mipi_dsi_dcs_set_display_off(dsi);
|
|
+}
|
|
+
|
|
+static int jh057n_unprepare(struct drm_panel *panel)
|
|
+{
|
|
+ struct jh057n *ctx = panel_to_jh057n(panel);
|
|
+
|
|
+ if (!ctx->prepared)
|
|
+ return 0;
|
|
+
|
|
+ regulator_disable(ctx->iovcc);
|
|
+ regulator_disable(ctx->vcc);
|
|
+ ctx->prepared = false;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int jh057n_prepare(struct drm_panel *panel)
|
|
+{
|
|
+ struct jh057n *ctx = panel_to_jh057n(panel);
|
|
+ int ret;
|
|
+
|
|
+ if (ctx->prepared)
|
|
+ return 0;
|
|
+
|
|
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
|
|
+ ret = regulator_enable(ctx->vcc);
|
|
+ if (ret < 0) {
|
|
+ DRM_DEV_ERROR(ctx->dev,
|
|
+ "Failed to enable vcc supply: %d\n", ret);
|
|
+ return ret;
|
|
+ }
|
|
+ ret = regulator_enable(ctx->iovcc);
|
|
+ if (ret < 0) {
|
|
+ DRM_DEV_ERROR(ctx->dev,
|
|
+ "Failed to enable iovcc supply: %d\n", ret);
|
|
+ goto disable_vcc;
|
|
+ }
|
|
+
|
|
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
+ usleep_range(20, 40);
|
|
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
+ msleep(20);
|
|
+
|
|
+ ctx->prepared = true;
|
|
+
|
|
+ return 0;
|
|
+
|
|
+disable_vcc:
|
|
+ regulator_disable(ctx->vcc);
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct drm_display_mode default_mode = {
|
|
+ .hdisplay = 720,
|
|
+ .hsync_start = 720 + 90,
|
|
+ .hsync_end = 720 + 90 + 20,
|
|
+ .htotal = 720 + 90 + 20 + 20,
|
|
+ .vdisplay = 1440,
|
|
+ .vsync_start = 1440 + 20,
|
|
+ .vsync_end = 1440 + 20 + 4,
|
|
+ .vtotal = 1440 + 20 + 4 + 12,
|
|
+ .vrefresh = 60,
|
|
+ .clock = 75276,
|
|
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
+ .width_mm = 65,
|
|
+ .height_mm = 130,
|
|
+};
|
|
+
|
|
+static int jh057n_get_modes(struct drm_panel *panel,
|
|
+ struct drm_connector *connector)
|
|
+{
|
|
+ struct jh057n *ctx = panel_to_jh057n(panel);
|
|
+ struct drm_display_mode *mode;
|
|
+
|
|
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
|
|
+ if (!mode) {
|
|
+ DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
|
+ default_mode.hdisplay, default_mode.vdisplay,
|
|
+ default_mode.vrefresh);
|
|
+ return -ENOMEM;
|
|
+ }
|
|
+
|
|
+ drm_mode_set_name(mode);
|
|
+
|
|
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
+ connector->display_info.width_mm = mode->width_mm;
|
|
+ connector->display_info.height_mm = mode->height_mm;
|
|
+ drm_mode_probed_add(connector, mode);
|
|
+
|
|
+ return 1;
|
|
+}
|
|
+
|
|
+static const struct drm_panel_funcs jh057n_drm_funcs = {
|
|
+ .disable = jh057n_disable,
|
|
+ .unprepare = jh057n_unprepare,
|
|
+ .prepare = jh057n_prepare,
|
|
+ .enable = jh057n_enable,
|
|
+ .get_modes = jh057n_get_modes,
|
|
+};
|
|
+
|
|
+static int allpixelson_set(void *data, u64 val)
|
|
+{
|
|
+ struct jh057n *ctx = data;
|
|
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
+
|
|
+ DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
|
|
+ dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
|
|
+ msleep(val * 1000);
|
|
+ /* Reset the panel to get video back */
|
|
+ drm_panel_disable(&ctx->panel);
|
|
+ drm_panel_unprepare(&ctx->panel);
|
|
+ drm_panel_prepare(&ctx->panel);
|
|
+ drm_panel_enable(&ctx->panel);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
|
|
+ allpixelson_set, "%llu\n");
|
|
+
|
|
+static void jh057n_debugfs_init(struct jh057n *ctx)
|
|
+{
|
|
+ ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
|
|
+
|
|
+ debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
|
|
+ &allpixelson_fops);
|
|
+}
|
|
+
|
|
+static void jh057n_debugfs_remove(struct jh057n *ctx)
|
|
+{
|
|
+ debugfs_remove_recursive(ctx->debugfs);
|
|
+ ctx->debugfs = NULL;
|
|
+}
|
|
+
|
|
+static int jh057n_probe(struct mipi_dsi_device *dsi)
|
|
+{
|
|
+ struct device *dev = &dsi->dev;
|
|
+ struct jh057n *ctx;
|
|
+ int ret;
|
|
+
|
|
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
+ if (!ctx)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
+ if (IS_ERR(ctx->reset_gpio)) {
|
|
+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
|
|
+ return PTR_ERR(ctx->reset_gpio);
|
|
+ }
|
|
+
|
|
+ mipi_dsi_set_drvdata(dsi, ctx);
|
|
+
|
|
+ ctx->dev = dev;
|
|
+
|
|
+ dsi->lanes = 4;
|
|
+ dsi->format = MIPI_DSI_FMT_RGB888;
|
|
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
|
|
+ MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
+
|
|
+ ctx->vcc = devm_regulator_get(dev, "vcc");
|
|
+ if (IS_ERR(ctx->vcc)) {
|
|
+ ret = PTR_ERR(ctx->vcc);
|
|
+ if (ret != -EPROBE_DEFER)
|
|
+ DRM_DEV_ERROR(dev,
|
|
+ "Failed to request vcc regulator: %d\n",
|
|
+ ret);
|
|
+ return ret;
|
|
+ }
|
|
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
|
|
+ if (IS_ERR(ctx->iovcc)) {
|
|
+ ret = PTR_ERR(ctx->iovcc);
|
|
+ if (ret != -EPROBE_DEFER)
|
|
+ DRM_DEV_ERROR(dev,
|
|
+ "Failed to request iovcc regulator: %d\n",
|
|
+ ret);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
|
|
+ DRM_MODE_CONNECTOR_DSI);
|
|
+
|
|
+ ret = drm_panel_of_backlight(&ctx->panel);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ drm_panel_add(&ctx->panel);
|
|
+
|
|
+ ret = mipi_dsi_attach(dsi);
|
|
+ if (ret < 0) {
|
|
+ DRM_DEV_ERROR(dev,
|
|
+ "mipi_dsi_attach failed (%d). Is host ready?\n",
|
|
+ ret);
|
|
+ drm_panel_remove(&ctx->panel);
|
|
+ return ret;
|
|
+ }
|
|
+
|
|
+ DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
|
|
+ default_mode.hdisplay, default_mode.vdisplay,
|
|
+ default_mode.vrefresh,
|
|
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
|
|
+
|
|
+ jh057n_debugfs_init(ctx);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void jh057n_shutdown(struct mipi_dsi_device *dsi)
|
|
+{
|
|
+ struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
+ int ret;
|
|
+
|
|
+ ret = drm_panel_unprepare(&ctx->panel);
|
|
+ if (ret < 0)
|
|
+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
|
|
+ ret);
|
|
+
|
|
+ ret = drm_panel_disable(&ctx->panel);
|
|
+ if (ret < 0)
|
|
+ DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
|
|
+ ret);
|
|
+}
|
|
+
|
|
+static int jh057n_remove(struct mipi_dsi_device *dsi)
|
|
+{
|
|
+ struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
+ int ret;
|
|
+
|
|
+ jh057n_shutdown(dsi);
|
|
+
|
|
+ ret = mipi_dsi_detach(dsi);
|
|
+ if (ret < 0)
|
|
+ DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
|
|
+ ret);
|
|
+
|
|
+ drm_panel_remove(&ctx->panel);
|
|
+
|
|
+ jh057n_debugfs_remove(ctx);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static const struct of_device_id jh057n_of_match[] = {
|
|
+ { .compatible = "rocktech,jh057n00900" },
|
|
+ { /* sentinel */ }
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, jh057n_of_match);
|
|
+
|
|
+static struct mipi_dsi_driver jh057n_driver = {
|
|
+ .probe = jh057n_probe,
|
|
+ .remove = jh057n_remove,
|
|
+ .shutdown = jh057n_shutdown,
|
|
+ .driver = {
|
|
+ .name = DRV_NAME,
|
|
+ .of_match_table = jh057n_of_match,
|
|
+ },
|
|
+};
|
|
+module_mipi_dsi_driver(jh057n_driver);
|
|
+
|
|
+MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
|
|
+MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
|
|
+MODULE_LICENSE("GPL v2");
|
|
--
|
|
2.26.2
|
|
|