The Linux kernel
ba50810ff4
* Thu Jun 09 2022 Patrick Talbert <ptalbert@redhat.com> [5.14.0-108.el9] - net: add netif_set_real_num_queues() for device reconfig (Ivan Vecera) [2094002] - spmi: spmi-pmic-arb: fix irq_set_type race condition (Steve Best) [2071751] - spmi: mediatek: Add support for MT8195 (Steve Best) [2071751] - spmi: mediatek: Add support for MT6873/8192 (Steve Best) [2071751] - spmi: pmic-arb: Add sid and address to error messages (Steve Best) [2071751] - bus: Make remove callback return void (Steve Best) [2071751] - rpmsg: core: add API to get MTU (Steve Best) [2071771] - RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL (Steve Best) [2071771] - rpmsg: ctrl: Introduce new RPMSG_CREATE/RELEASE_DEV_IOCTL controls (Steve Best) [2071771] - rpmsg: char: Introduce the "rpmsg-raw" channel (Steve Best) [2071771] - rpmsg: char: Add possibility to use default endpoint of the rpmsg device (Steve Best) [2071771] - rpmsg: char: Refactor rpmsg_chrdev_eptdev_create function (Steve Best) [2071771] - rpmsg: Update rpmsg_chrdev_register_device function (Steve Best) [2071771] - rpmsg: Move the rpmsg control device from rpmsg_char to rpmsg_ctrl (Steve Best) [2071771] - rpmsg: Create the rpmsg class in core instead of in rpmsg char (Steve Best) [2071771] - rpmsg: char: Export eptdev create and destroy functions (Steve Best) [2071771] - rpmsg: char: treat rpmsg_trysend() ENOMEM as EAGAIN (Steve Best) [2071771] - rpmsg: qcom_smd: Fix redundant channel->registered assignment (Steve Best) [2071771] - rpmsg: use struct_size over open coded arithmetic (Steve Best) [2071771] - rpmsg: smd: allow opening rpm_requests even if already opened (Steve Best) [2071771] - rpmsg: qcom_smd: Promote to arch_initcall (Steve Best) [2071771] - rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev (Steve Best) [2071771] - rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev (Steve Best) [2071771] - rpmsg: core: Clean up resources on announce_create failure. (Steve Best) [2071771] - rpmsg: Fix documentation return formatting (Steve Best) [2071771] - rpmsg: char: Add pr_fmt() to prefix messages (Steve Best) [2071771] - rpmsg: glink: Send READ_NOTIFY command in FIFO full case (Steve Best) [2071771] - rpmsg: glink: Remove channel decouple from rpdev release (Steve Best) [2071771] - rpmsg: glink: Remove the rpmsg dev in close_ack (Steve Best) [2071771] - rpmsg: glink: Add TX_DATA_CONT command while sending (Steve Best) [2071771] - rpmsg: virtio_rpmsg_bus: use dev_warn_ratelimited for msg with no recipient (Steve Best) [2071771] - rpmsg: virtio: Remove unused including <linux/of_device.h> (Steve Best) [2071771] - rpmsg: char: Remove useless include (Steve Best) [2071771] - rpmsg: Change naming of mediatek rpmsg property (Steve Best) [2071771] - rpmsg: glink: Replace strncpy() with strscpy_pad() (Steve Best) [2071771] - bus: Make remove callback return void (Steve Best) [2071771] - interconnect: Restore sync state by ignoring ipa-virt in provider count (Steve Best) [2071778] - interconnect: qcom: sdx55: Drop IP0 interconnects (Steve Best) [2071778] - interconnect: qcom: sc7180: Drop IP0 interconnects (Steve Best) [2071778] - interconnect: qcom: msm8939: Remove snoc_mm specific regmap (Steve Best) [2071778] - interconnect: imx: Add imx_icc_get_bw function to set initial avg and peak (Steve Best) [2071778] - interconnect: qcom: Add QCM2290 driver support (Steve Best) [2071778] - interconnect: icc-rpm: Support child NoC device probe (Steve Best) [2071778] - interconnect: icc-rpm: Add QNOC type QoS support (Steve Best) [2071778] - interconnect: icc-rpm: Define ICC device type (Steve Best) [2071778] - interconnect: qcom: Add SM8450 interconnect provider driver (Steve Best) [2071778] - interconnect: qcom: rpm: Prevent integer overflow in rate (Steve Best) [2071778] - interconnect: icc-rpm: Use NOC_QOS_MODE_INVALID for qos_mode check (Steve Best) [2071778] - interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate (Steve Best) [2071778] - interconnect: qcom: Add MSM8996 interconnect provider driver (Steve Best) [2071778] - interconnect: icc-rpm: Add support for bus power domain (Steve Best) [2071778] - interconnect: qcom: Add EPSS L3 support on SC7280 (Steve Best) [2071778] - interconnect: samsung: describe drivers in KConfig (Steve Best) [2071778] - interconnect: qcom: drop DEFINE_QNODE macro (Steve Best) [2071778] - interconnect: qcs404: expand DEFINE_QNODE macros (Steve Best) [2071778] - interconnect: msm8939: add support for AP-owned nodes (Steve Best) [2071778] - interconnect: msm8939: expand DEFINE_QNODE macros (Steve Best) [2071778] - interconnect: msm8916: add support for AP-owned nodes (Steve Best) [2071778] - interconnect: msm8916: expand DEFINE_QNODE macros (Steve Best) [2071778] - interconnect: icc-rpm: add support for QoS reg offset (Steve Best) [2071778] - interconnect: sdm660: merge common code into icc-rpm (Steve Best) [2071778] - interconnect: sdm660: drop default/unused values (Steve Best) [2071778] - interconnect: sdm660: expand DEFINE_QNODE macros (Steve Best) [2071778] - interconnect: icc-rpm: move bus clocks handling into qnoc_probe (Steve Best) [2071778] - interconnect: qcom: sdm660: Add missing a2noc qos clocks (Steve Best) [2071778] - interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask (Steve Best) [2071778] - interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg (Steve Best) [2071778] - Revert "interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate" (Steve Best) [2071778] - interconnect: qcom: osm-l3: Use driver-specific naming (Steve Best) [2071778] - interconnect: qcom: osm-l3: Add sc8180x support (Steve Best) [2071778] - interconnect: qcom: Add SC8180x providers (Steve Best) [2071778] - interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate (Steve Best) [2071778] - interconnect: Sanity check that node isn't already on list (Steve Best) [2071778] - interconnect: qcom: icc-rpmh: Consolidate probe functions (Steve Best) [2071778] - regulator: Turn off kernel configs for regulators added by this patch set (Steve Best) [2071777] - regulator: qcom_smd: fix for_each_child.cocci warnings (Steve Best) [2071777] - regulator: rohm-generic: iniline stub function (Steve Best) [2071777] - regulator: Add regulator_err2notif() helper (Steve Best) [2071777] - regulator: fix bullet lists of regulator_ops comment (Steve Best) [2071777] - regulator: Minor regulator documentation fixes. (Steve Best) [2071777] - regulator: atc260x: Fix missing active_discharge_on setting (Steve Best) [2071777] - regulator: rtq2134: Fix missing active_discharge_on setting (Steve Best) [2071777] - regulator: rt4831: Add active_discharge_on to fix discharge API (Steve Best) [2071777] - regulator: rt4831: Add bypass mask to fix set_bypass API work (Steve Best) [2071777] - regulator: qcom-rpmh: Add support for SDX65 (Steve Best) [2071777] - regulator: rt5190a: Add support for Richtek RT5190A PMIC (Steve Best) [2071777] - regulator: cleanup comments (Steve Best) [2071777] - regulator: virtual: add devicetree support (Steve Best) [2071777] - regulator: virtual: warn against production use (Steve Best) [2071777] - regulator: virtual: use dev_err_probe() (Steve Best) [2071777] - regulator: da9121: Remove surplus DA9141 parameters (Steve Best) [2071777] - regulator: da9121: Fix DA914x voltage value (Steve Best) [2071777] - regulator: core: fix false positive in regulator_late_cleanup() (Steve Best) [2071777] - regulator: MAX20086: add gpio/consumer.h (Steve Best) [2071777] - regulator: max20086: fix error code in max20086_parse_regulators_dt() (Steve Best) [2071777] - regulator: Add MAX20086-MAX20089 driver (Steve Best) [2071777] - regulator: qcom_smd: Align probe function with rpmh-regulator (Steve Best) [2071777] - regulator: remove redundant ret variable (Steve Best) [2071777] - regulator: qcom-labibb: OCP interrupts are not a failure while disabled (Steve Best) [2071777] - regulator: Introduce tps68470-regulator driver (Steve Best) [2071777] - drivers/regulator: remove redundant ret variable (Steve Best) [2071777] - regulator: qcom-rpmh: Add support for PM8450 regulators (Steve Best) [2071777] - regulator: da9121: Add DA914x support (Steve Best) [2071777] - regulator: da9121: Prevent current limit change when enabled (Steve Best) [2071777] - regulator: qcom-rpmh: Add PMG1110 regulators (Steve Best) [2071777] - regulator: qcom_spmi: Add pm8226 regulators (Steve Best) [2071777] - regulator: irq_helper: Provide helper for trivial IRQ notifications (Steve Best) [2071777] - regulator: bd718x7: Use rohm generic restricted voltage setting (Steve Best) [2071777] - regulator: rohm-regulator: add helper for restricted voltage setting (Steve Best) [2071777] - regulator: Don't error out fixed regulator in regulator_sync_voltage() (Steve Best) [2071777] - regulator: tps80031: Remove driver (Steve Best) [2071777] - regulator: Fix SY7636A breakage (Steve Best) [2071777] - regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC (Steve Best) [2071777] - regulator: qcom-rpmh: Add PM6350 regulators (Steve Best) [2071777] - regulator: sy7636a: Remove requirement on sy7636a mfd (Steve Best) [2071777] - regulator: tps62360: replacing legacy gpio interface for gpiod (Steve Best) [2071777] - regulator: lp872x: Remove lp872x_dvs_state (Steve Best) [2071777] - regulator: lp872x: replacing legacy gpio interface for gpiod (Steve Best) [2071777] - regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled (Steve Best) [2071777] - mfd: hi6421-spmi-pmic: Cleanup drvdata to only include regmap (Steve Best) [2071777] - regulator: bd71815: Use defined mask values (Steve Best) [2071777] - regulator: qcom_smd: Add PM2250 regulators (Steve Best) [2071777] - regulator: Lower priority of logging when setting supply (Steve Best) [2071777] - regulator: dummy: Use devm_regulator_register() (Steve Best) [2071777] - regulator: pwm-regulator: Make use of the helper function dev_err_probe() (Steve Best) [2071777] - regulator: fix typo in Kconfig and max8973-regulator (Steve Best) [2071777] - regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings" (Steve Best) [2071777] - regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name (Steve Best) [2071777] - regulator: vctrl: Avoid lockdep warning in enable/disable ops (Steve Best) [2071777] - regulator: vctrl: Use locked regulator_get_voltage in probe path (Steve Best) [2071777] - regulator: Documentation fix for regulator error notification helper (Steve Best) [2071777] - regulator: sy7636a: Use the regmap directly (Steve Best) [2071777] - regulator: sy7636a: Store the epd-pwr-good GPIO locally (Steve Best) [2071777] - regulator: sy7636a: Use the parent driver data (Steve Best) [2071777] - regulator: sy7636a: Remove the poll_enable_time (Steve Best) [2071777] - regulator: sy8827n: Enable REGCACHE_FLAT (Steve Best) [2071777] - regulator: sy8824x: Enable REGCACHE_FLAT (Steve Best) [2071777] - regulator: rtq2134: Fix coding style (Steve Best) [2071777] - regulator: hi6421v600: rename voltage range arrays (Steve Best) [2071777] - regulator: hi6421v600: use lowercase for ldo (Steve Best) [2071777] - regulator: fixed: use dev_err_probe for register (Steve Best) [2071777] - regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC (Steve Best) [2071777] - regulator: Fix a couple of spelling mistakes in Kconfig (Steve Best) [2071777] - regulator: rtq6752: fix reg reset behavior (Steve Best) [2071777] - regulator: da9063: Add support for full-current mode. (Steve Best) [2071777] - regulator: rt6245: make a const array func_base static, makes object smaller (Steve Best) [2071777] - regulator: rtq6752: Fix the typo for reg define and author name (Steve Best) [2071777] - regulator: Replace symbolic permissions with octal permissions (Steve Best) [2071777] - regulator: rt6752: Add support for Richtek RTQ6752 (Steve Best) [2071777] - regulator: rt5033: Use linear ranges to map all voltage selection (Steve Best) [2071777] - regulator: tps65910: Silence deferred probe error (Steve Best) [2071777] - regulator: mt6397: Remove modeset_shift from struct mt6397_regulator_info (Steve Best) [2071777] - regulator: mt6359: Remove shift fields from struct mt6359_regulator_info (Steve Best) [2071777] - regulator: mt6358: Remove shift fields from struct mt6358_regulator_info (Steve Best) [2071777] - regulator: devres: unexport devm_regulator_unregister_supply_alias() (Steve Best) [2071777] - regulator: devres: remove devm_regulator_bulk_unregister_supply_alias() (Steve Best) [2071777] - regulator: devres: remove devm_regulator_unregister() function (Steve Best) [2071777] - regulator: hi6421v600-regulator: add a missing dot at copyright (Steve Best) [2071777] - scsi: scsi_dh_alua: Properly handle the ALUA transitioning state (Ewan D. Milne) [2085105] - bnx2x: fix napi API usage sequence (Manish Chopra) [2080677] Resolves: rhbz#2094002, rhbz#2071751, rhbz#2071771, rhbz#2071778, rhbz#2071777, rhbz#2085105, rhbz#2080677 Signed-off-by: Patrick Talbert <ptalbert@redhat.com> |
||
|---|---|---|
| .gitignore | ||
| check-kabi | ||
| cpupower.config | ||
| cpupower.service | ||
| filter-aarch64.sh.rhel | ||
| filter-armv7hl.sh.rhel | ||
| filter-i686.sh.rhel | ||
| filter-modules.sh.rhel | ||
| filter-ppc64le.sh.rhel | ||
| filter-s390x.sh.rhel | ||
| filter-x86_64.sh.rhel | ||
| gating.yaml | ||
| generate_all_configs.sh | ||
| kernel-aarch64-debug-rhel.config | ||
| kernel-aarch64-rhel.config | ||
| kernel-local | ||
| kernel-ppc64le-debug-rhel.config | ||
| kernel-ppc64le-rhel.config | ||
| kernel-s390x-debug-rhel.config | ||
| kernel-s390x-rhel.config | ||
| kernel-s390x-zfcpdump-rhel.config | ||
| kernel-x86_64-debug-rhel.config | ||
| kernel-x86_64-rhel.config | ||
| kernel.spec | ||
| kvm_stat.logrotate | ||
| linux-kernel-test.patch | ||
| Makefile.rhelver | ||
| merge.pl | ||
| mod-denylist.sh | ||
| mod-extra.list.rhel | ||
| mod-internal.list | ||
| mod-sign.sh | ||
| Module.kabi_aarch64 | ||
| Module.kabi_dup_aarch64 | ||
| Module.kabi_dup_ppc64le | ||
| Module.kabi_dup_s390x | ||
| Module.kabi_dup_x86_64 | ||
| Module.kabi_ppc64le | ||
| Module.kabi_s390x | ||
| Module.kabi_x86_64 | ||
| parallel_xz.sh | ||
| partial-kgcov-snip.config | ||
| patch-5.14.0-redhat.patch | ||
| process_configs.sh | ||
| README.rst | ||
| rheldup3.x509 | ||
| rhelkpatch1.x509 | ||
| rpminspect.yaml | ||
| sources | ||
| update_scripts.sh | ||
| x509.genkey.centos | ||
| x509.genkey.rhel | ||
=================== The Kernel dist-git =================== The kernel is maintained in a `source tree`_ rather than directly in dist-git. The specfile is maintained as a `template`_ in the source tree along with a set of build scripts to generate configurations, (S)RPMs, and to populate the dist-git repository. The `documentation`_ for the source tree covers how to contribute and maintain the tree. If you're looking for the downstream patch set it's available in the source tree with "git log master..ark-patches" or `online`_. Each release in dist-git is tagged in the source repository so you can easily check out the source tree for a build. The tags are in the format name-version-release, but note release doesn't contain the dist tag since the source can be built in different build roots (Fedora, CentOS, etc.) .. _source tree: https://gitlab.com/cki-project/kernel-ark.git .. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template .. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home .. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches