kernel/Makefile.rhelver
Herton R. Krzesinski b704565159 kernel-5.14.0-280.el9
* Tue Feb 21 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-280.el9]
- redhat/configs: enable neoverse and cortex errata (Jeremy Linton) [2055405]
- coresight: syscfg: Update load and unload operations (Jeremy Linton) [2055405]
- coresight: configfs: Fix unload of configurations on module exit (Jeremy Linton) [2055405]
- coresight: syscfg: Fix memleak on registration failure in cscfg_create_device (Jeremy Linton) [2055405]
- coresight: core: Fix typo in a comment (Jeremy Linton) [2055405]
- Documentation: coresight: Update coresight configuration docs (Jeremy Linton) [2055405]
- coresight: configfs: Allow configfs to activate configuration (Jeremy Linton) [2055405]
- coresight: syscfg: Example CoreSight configuration loadable module (Jeremy Linton) [2055405]
- coresight: syscfg: Update load API for config loadable modules (Jeremy Linton) [2055405]
- coresight: configuration: Update API to permit dynamic load/unload (Jeremy Linton) [2055405]
- coresight: configuration: Update API to introduce load owner concept (Jeremy Linton) [2055405]
- Documentation: coresight: Fix documentation issue (Jeremy Linton) [2055405]
- coresight: Use devm_bitmap_zalloc when applicable (Jeremy Linton) [2055405]
- coresight: trbe: Work around write to out of range (Jeremy Linton) [2055405]
- coresight: trbe: Make sure we have enough space (Jeremy Linton) [2055405]
- coresight: trbe: Add a helper to determine the minimum buffer size (Jeremy Linton) [2055405]
- coresight: trbe: Workaround TRBE errata overwrite in FILL mode (Jeremy Linton) [2055405]
- coresight: trbe: Add infrastructure for Errata handling (Jeremy Linton) [2055405]
- coresight: trbe: Allow driver to choose a different alignment (Jeremy Linton) [2055405]
- coresight: trbe: Decouple buffer base from the hardware base (Jeremy Linton) [2055405]
- coresight: trbe: Add a helper to pad a given buffer area (Jeremy Linton) [2055405]
- coresight: trbe: Add a helper to calculate the trace generated (Jeremy Linton) [2055405]
- coresight: trbe: Defer the probe on offline CPUs (Jeremy Linton) [2055405]
- coresight: trbe: Fix incorrect access of the sink specific data (Jeremy Linton) [2055405]
- coresight: etm4x: Add ETM PID for Kryo-5XX (Jeremy Linton) [2055405]
- coresight: trbe: Prohibit trace before disabling TRBE (Jeremy Linton) [2055405]
- coresight: trbe: End the AUX handle on truncation (Jeremy Linton) [2055405]
- coresight: trbe: Do not truncate buffer on IRQ (Jeremy Linton) [2055405]
- coresight: trbe: Fix handling of spurious interrupts (Jeremy Linton) [2055405]
- coresight: trbe: irq handler: Do not disable TRBE if no action is needed (Jeremy Linton) [2055405]
- coresight: trbe: Unify the enabling sequence (Jeremy Linton) [2055405]
- coresight: trbe: Drop duplicate TRUNCATE flags (Jeremy Linton) [2055405]
- coresight: trbe: Ensure the format flag is always set (Jeremy Linton) [2055405]
- coresight: etm-pmu: Ensure the AUX handle is valid (Jeremy Linton) [2055405]
- coresight: etm4x: Use Trace Filtering controls dynamically (Jeremy Linton) [2055405]
- coresight: etm4x: Save restore TRFCR_EL1 (Jeremy Linton) [2055405]
- coresight: Don't immediately close events that are run on invalid CPU/sink combos (Jeremy Linton) [2055405]
- coresight: tmc-etr: Speed up for bounce buffer in flat mode (Jeremy Linton) [2055405]
- coresight: Update comments for removing cs_etm_find_snapshot() (Jeremy Linton) [2055405]
- coresight: tmc-etr: Use perf_output_handle::head for AUX ring buffer (Jeremy Linton) [2055405]
- coresight: tmc-etf: Add comment for store ordering (Jeremy Linton) [2055405]
- coresight: tmc-etr: Add barrier after updating AUX ring buffer (Jeremy Linton) [2055405]
- coresight: tmc: Configure AXI write burst size (Jeremy Linton) [2055405]
- dt-bindings: coresight: Add burst size for TMC (Jeremy Linton) [2055405]
- coresight: cpu-debug: Control default behavior via Kconfig (Jeremy Linton) [2055405]
- coresight: cti: Correct the parameter for pm_runtime_put (Jeremy Linton) [2055405]
- coresight: syscfg: Fix compiler warning (Jeremy Linton) [2055405]
- Documentation: coresight: Add documentation for CoreSight config (Jeremy Linton) [2055405]
- coresight: syscfg: Add initial configfs support (Jeremy Linton) [2055405]
- coresight: config: Add preloaded configurations (Jeremy Linton) [2055405]
- coresight: etm4x: Add complex configuration handlers to etmv4 (Jeremy Linton) [2055405]
- coresight: etm-perf: Update to activate selected configuration (Jeremy Linton) [2055405]
- coresight: syscfg: Add API to activate and enable configurations (Jeremy Linton) [2055405]
- coresight: etm-perf: Update to handle configuration selection (Jeremy Linton) [2055405]
- coresight: config: Add configuration and feature generic functions (Jeremy Linton) [2055405]
- coresight: syscfg: Add registration and feature loading for cs devices (Jeremy Linton) [2055405]
- coresight: syscfg: Initial coresight system configuration (Jeremy Linton) [2055405]
Resolves: rhbz#2055405

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
2023-02-21 18:08:21 +00:00

68 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 2
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 280
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif