ac9f183783
* Fri Jan 20 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-240.el9] - clk: tegra: Fix Tegra PWM parent clock (Mark Salter) [2135064] - redhat/configs: Enable CONFIG_SERIAL_TEGRA_TCU (Mark Salter) [2135064] - firmware: tegra: bpmp: Do not support big-endian (Mark Salter) [2135064] - firmware: tegra: bpmp: Use iosys-map helpers (Mark Salter) [2135064] - firmware: tegra: bpmp: Prefer u32 over uint32_t (Mark Salter) [2135064] - redhat/configs: enable Tegra234 SOC (Mark Salter) [2135064] - soc/tegra: cbb: Remove redundant dev_err call (Mark Salter) [2135064] - soc/tegra: cbb: Use DEFINE_SHOW_ATTRIBUTE to simplify tegra_cbb_err (Mark Salter) [2135064] - soc/tegra: cbb: Check firewall before enabling error reporting (Mark Salter) [2135064] - soc/tegra: cbb: Add checks for potential out of bound errors (Mark Salter) [2135064] - soc/tegra: cbb: Update slave maps for Tegra234 (Mark Salter) [2135064] - soc/tegra: cbb: Use correct master_id mask for CBB NOC in Tegra194 (Mark Salter) [2135064] - soc/tegra: fuse: Use platform info with SoC revision (Mark Salter) [2135064] - soc/tegra: pmc: Process wake events during resume (Mark Salter) [2135064] - soc/tegra: pmc: Fix dual edge triggered wakes (Mark Salter) [2135064] - soc/tegra: pmc: Add I/O pad table for Tegra234 (Mark Salter) [2135064] - soc/tegra: fuse: Add nvmem keepout list (Mark Salter) [2135064] - soc/tegra: fuse: Use SoC specific nvmem cells (Mark Salter) [2135064] - soc/tegra: pmc: Select IRQ_DOMAIN_HIERARCHY (Mark Salter) [2135064] - dt-bindings: tegra: pmc: Convert to json-schema (Mark Salter) [2135064] - dt-bindings: PHY: P2U: Add support for Tegra234 P2U block (Mark Salter) [2135064] - dt-bindings: phy: Tegra194 P2U convert to YAML (Mark Salter) [2135064] - dt-bindings: memory: tegra: Update validation for reg and reg-names (Mark Salter) [2135064] - dt-bindings: arm-smmu: Add compatible for Tegra234 SOC (Mark Salter) [2135064] - dmaengine: tegra: Fix build error without IOMMU_API (Mark Salter) [2135064] - redhat: configs: disable tegra186 gpc_dma (Mark Salter) [2135064] - dmaengine: tegra: Add terminate() for Tegra234 (Mark Salter) [2135064] - cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances (Mark Salter) [2135064] - dmaengine: tegra: Remove unused switch case (Mark Salter) [2135064] - dmaengine: tegra: Fix uninitialized variable usage (Mark Salter) [2135064] - dmaengine: tegra: Use platform_get_irq() to get IRQ resource (Mark Salter) [2135064] - dmaengine: tegra: Remove unused including <linux/version.h> (Mark Salter) [2135064] - dmaengine: tegra: Add tegra gpcdma driver (Mark Salter) [2135064] - redhat: configs: Enable Tegra Control Backbone driver (Mark Salter) [2135064] - arm64: tegra: Add GPCDMA support for Tegra I2C (Mark Salter) [2135064] - arm64: tegra: Add iommus for HDA on Tegra234 (Mark Salter) [2135064] - arm64: tegra: Enable HDA node for Jetson AGX Orin (Mark Salter) [2135064] - arm64: tegra: Add context isolation domains on Tegra234 (Mark Salter) [2135064] - arm64: tegra: Fixup iommu-map property formatting (Mark Salter) [2135064] - arm64: dts: tegra: smaug: Add Wi-Fi node (Mark Salter) [2135064] - arm64: dts: tegra: smaug: Add Bluetooth node (Mark Salter) [2135064] - soc/tegra: pmc: Check device node status property (Mark Salter) [2135064] - soc/tegra: pmc: Use devm_clk_get_optional() (Mark Salter) [2135064] - soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA (Mark Salter) [2135064] - soc/tegra: pmc: Add USB port wake events for Tegra194 (Mark Salter) [2135064] - soc/tegra: pmc: Add support for simple wake events (Mark Salter) [2135064] - soc/tegra: pmc: Remove leading space (Mark Salter) [2135064] - soc/tegra: fuse: Add missing of_node_put() (Mark Salter) [2135064] - soc/tegra: fuse: Add missing of_node_put() in tegra_init_fuse() (Mark Salter) [2135064] - dt-bindings: Add Host1x context stream IDs on Tegra234 (Mark Salter) [2135064] - soc/tegra: cbb: Add support for Tegra241 (Grace) (Mark Salter) [2135064] - soc/tegra: cbb: Add driver for Tegra234 CBB 2.0 (Mark Salter) [2135064] - soc/tegra: cbb: Add CBB 1.0 driver for Tegra194 (Mark Salter) [2135064] - soc/tegra: Set ERD bit to mask inband errors (Mark Salter) [2135064] - memory: tegra: Add MGBE memory clients for Tegra234 (Mark Salter) [2135064] - cpufreq: tegra194: Add support for Tegra234 (Mark Salter) [2135064] - cpufreq: tegra194: add soc data to support multiple soc (Mark Salter) [2135064] - memory: tegra: Add MC error logging on Tegra186 onward (Mark Salter) [2135064] - memory: tegra: Add memory controller channels support (Mark Salter) [2135064] - memory: tegra: Add APE memory clients for Tegra234 (Mark Salter) [2135064] - memory: tegra: Add Tegra234 support (Mark Salter) [2135064] - memory: tegra: mc: simplify platform_get_resource() (Mark Salter) [2135064] - memory: Update of_memory lpddr2 revision-id binding (Mark Salter) [2135064] - memory: of: parse max-freq property (Mark Salter) [2135064] - memory: tegra: Constify struct thermal_cooling_device_ops (Mark Salter) [2135064] - memory: tegra20-emc: Correct memory device mask (Mark Salter) [2135064] - memory: tegra30-emc: Print additional memory info (Mark Salter) [2135064] - memory: tegra20-emc: Add runtime dependency on devfreq governor module (Mark Salter) [2135064] - memory: tegra20-emc: Support matching timings by LPDDR2 configuration (Mark Salter) [2135064] - memory: Add LPDDR2-info helpers (Mark Salter) [2135064] - memory: tegra210-emc: replace DEFINE_SIMPLE_ATTRIBUTE with (Mark Salter) [2135064] - memory: tegra186-emc: Fix error return code in tegra186_emc_probe() (Mark Salter) [2135064] - memory: tegra: Make use of the helper function devm_add_action_or_reset() (Mark Salter) [2135064] - memory: tegra186-emc: Handle errors in BPMP response (Mark Salter) [2135064] - memory: tegra: Remove interconnect state syncing hack (Mark Salter) [2135064] - memory: tegra210-emc: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE (Mark Salter) [2135064] - memory: tegra30-emc: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE (Mark Salter) [2135064] - memory: tegra: make the array list static const, makes object smaller (Mark Salter) [2135064] - memory: tegra: fix unused-function warning (Mark Salter) [2135064] - soc/tegra: pmc: Document core domain fields (Mark Salter) [2135064] - soc/tegra: pmc: Select REGMAP (Mark Salter) [2135064] - soc/tegra: pmc: Update Tegra234 reset sources (Mark Salter) [2135064] - soc/tegra: fuse: Add nvmem cell lookup entries for Tegra194 (Mark Salter) [2135064] - arm64: tegra: Move audio IOMMU properties to ADMAIF node (Mark Salter) [2135064] - soc/tegra: bpmp: cleanup double word in comment (Mark Salter) [2135064] - soc/tegra: pmc: Add Tegra234 wake events (Mark Salter) [2135064] - soc/tegra: fuse: Explicitly cast to/from __iomem (Mark Salter) [2135064] - soc/tegra: fuse: Update nvmem cell list (Mark Salter) [2135064] - soc/tegra: pmc: Enable core domain support for Tegra20 and Tegra30 (Mark Salter) [2135064] - dt-bindings: Document Tegra234 HDA support (Mark Salter) [2135064] - arm64: tegra: smaug: Remove extra PLL power supplies for XUSB (Mark Salter) [2135064] - soc/tegra: pmc: Rename core power domain (Mark Salter) [2135064] - soc/tegra: pmc: Rename 3d power domains (Mark Salter) [2135064] - soc/tegra: regulators: Prepare for suspend (Mark Salter) [2135064] - soc/tegra: fuse: Use resource-managed helpers (Mark Salter) [2135064] - soc/tegra: fuse: Reset hardware (Mark Salter) [2135064] - soc/tegra: pmc: Add reboot notifier (Mark Salter) [2135064] - soc/tegra: Don't print error message when OPPs not available (Mark Salter) [2135064] - soc/tegra: Enable runtime PM during OPP state-syncing (Mark Salter) [2135064] - soc/tegra: fuse: Fix bitwise vs. logical OR warning (Mark Salter) [2135064] - soc/tegra: pmc: Use devm_platform_ioremap_resource() (Mark Salter) [2135064] - soc/tegra: Add Tegra186 ARI driver (Mark Salter) [2135064] - soc/tegra: Fix an error handling path in tegra_powergate_power_up() (Mark Salter) [2135064] - soc/tegra: pmc: Expose USB regmap to all SoCs (Mark Salter) [2135064] - soc/tegra: pmc: Disable PMC state syncing (Mark Salter) [2135064] - firmware: tegra: bpmp: Use devm_platform_ioremap_resource() (Mark Salter) [2135064] - soc/tegra: pm: Make stubs usable for compile testing (Mark Salter) [2135064] - soc/tegra: irq: Add stubs needed for compile testing (Mark Salter) [2135064] - soc/tegra: fuse: Add stubs needed for compile testing (Mark Salter) [2135064] - soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 (Mark Salter) [2135064] - soc/tegra: fuse: Add runtime PM support (Mark Salter) [2135064] - soc/tegra: fuse: Clear fuse->clk on driver probe failure (Mark Salter) [2135064] - soc/tegra: pmc: Prevent racing with cpuilde driver (Mark Salter) [2135064] - soc/tegra: bpmp: Remove unused including <linux/version.h> (Mark Salter) [2135064] Resolves: rhbz#2135064 Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 240
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|