The Linux kernel
Go to file
Denys Vlasenko abea27b0ac kernel-4.18.0-547.el8
* Tue Mar 19 2024 Denys Vlasenko <dvlasenk@redhat.com> [4.18.0-547.el8]
- x86/efistub: Avoid placing the kernel below LOAD_PHYSICAL_ADDR (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Give up if memory attribute protocol returns an error (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Increase section and file alignment to 4k/512 (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Split off PE/COFF .data section (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Drop PE/COFF .reloc section (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Construct PE/COFF .text section from assembler (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Derive file size from _edata symbol (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed: Remove, discard, or assert for unwanted sections (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Check that there are no run-time relocations (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Define setup size in linker script (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Set EFI handover offset directly in header asm (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Drop references to startup_64 (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Drop redundant code setting the root device (Lenny Szubowicz) [RHEL-2505]
- x86/build: Declutter the build output (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Omit compression buffer from PE/COFF image memory footprint (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Mark global variables as static (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Remove extra headroom for setup block (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Remove the 'bugger off' message (Lenny Szubowicz) [RHEL-2505]
- x86/efi: Drop alignment flags from PE section headers (Lenny Szubowicz) [RHEL-2505]
- efi: Put Linux specific magic number in the DOS header (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Fix the missing KASLR_FLAG bit in boot_params->hdr.loadflags (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Avoid physical KASLR on older Dell systems (Lenny Szubowicz) [RHEL-2505]
- x86/boot: efistub: Assign global boot_params variable (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Rename conflicting 'boot_params' pointer to 'boot_params_ptr' (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Avoid legacy decompressor when doing EFI boot (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Perform SNP feature test while running in the firmware (Lenny Szubowicz) [RHEL-2505]
- x86/sev: Do not try to parse for the CC blob on non-AMD hardware (Lenny Szubowicz) [RHEL-2505]
- efi/libstub: Add limit argument to efi_random_alloc() (Lenny Szubowicz) [RHEL-2505]
- arm64: efi: Limit allocations to 48-bit addressable physical region (Lenny Szubowicz) [RHEL-2505]
- efi: libstub: use EFI_LOADER_CODE region when moving the kernel in memory (Lenny Szubowicz) [RHEL-2505]
- arm64: efi: kaslr: Fix occasional random alloc (and boot) failure (Lenny Szubowicz) [RHEL-2505]
- efi/libstub/random: Increase random alloc granularity (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Factor out kernel decompression and relocation (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Move global symbol references to C code (Lenny Szubowicz) [RHEL-2505]
- decompress: Use 8 byte alignment (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Prefer EFI memory attributes protocol over DXE services (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Perform 4/5 level paging switch from the stub (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Merge trampoline cleanup with switching code (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Pass pgtable address to trampoline directly (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Only call the trampoline when changing paging levels (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Call trampoline directly from C code (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Avoid the need for a stack in the 32-bit trampoline (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Use standard calling convention for trampoline (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Call trampoline as a normal function (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Remove .bss/.pgtable from bzImage (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Remove run-time relocations from .head.text code (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Assign paging related global variables earlier (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Store boot_params pointer in callee save register (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Clear BSS in EFI handover protocol entrypoint (Lenny Szubowicz) [RHEL-2505]
- x86/head_64: Store boot_params pointer in callee save register (Lenny Szubowicz) [RHEL-2505]
- x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved (Lenny Szubowicz) [RHEL-2505]
- x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed (Lenny Szubowicz) [RHEL-2505]
- efi/libstub: Add memory attribute protocol definitions (Lenny Szubowicz) [RHEL-2505]
- efi/x86: libstub: remove unused variable (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Robustify calling startup_{32,64}() from the decompressor code (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Simplify and clean up handover entry code (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Branch straight to kernel entry point from C code (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Avoid using code32_start (Lenny Szubowicz) [RHEL-2505]
- efi/libstub/x86: Use Exit() boot service to exit the stub on errors (Lenny Szubowicz) [RHEL-2505]
- efi: x86: Wipe setup_data on pure EFI boot (Lenny Szubowicz) [RHEL-2505]
- efi: x86: Fix config name for setting the NX-compatibility flag in the PE header (Lenny Szubowicz) [RHEL-2505]
- efi: x86: Set the NX-compatibility flag in the PE header (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Add kernel preferred address to PE header (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Use symbolic constants in PE header instead of bare numbers (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Drop redundant .bss section (Lenny Szubowicz) [RHEL-2505]
- efi/x86: add headroom to decompressor BSS to account for setup block (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Remove run-time relocations from head_{32,64}.S (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed: Fix debug_puthex() parameter type (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Use unsigned comparison for addresses (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Micro-optimize GDT loading instructions (Lenny Szubowicz) [RHEL-2505]
- x86/boot: GDT limit value should be size - 1 (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Remove GDT setup from efi_main (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Clear direction and interrupt flags in startup_64 (Lenny Szubowicz) [RHEL-2505]
- efi/x86: Don't depend on firmware GDT layout (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Remove KEEP_SEGMENTS support (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Handle malformed SRAT tables during early ACPI parsing (Lenny Szubowicz) [RHEL-2505]
- efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode (Lenny Szubowicz) [RHEL-2505]
- efi/libstub/x86: Avoid globals to store context during mixed mode calls (Lenny Szubowicz) [RHEL-2505]
- x86/efistub: Disable paging at mixed mode entry (Lenny Szubowicz) [RHEL-2505]
- x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table (Lenny Szubowicz) [RHEL-2505]
- x86/asm: Make some functions local (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Annotate data appropriately (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Annotate local functions (Lenny Szubowicz) [RHEL-2505]
- x86/asm: Make more symbols local (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement() (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Fix boot on machines with broken E820 table (Lenny Szubowicz) [RHEL-2505]
- x86, boot: Remove multiple copy of static function sanitize_boot_params() (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Remove unused variable (Lenny Szubowicz) [RHEL-2505]
- x86/boot/compressed/64: Explain paging_prepare()'s return value (Lenny Szubowicz) [RHEL-2505]
- x86/boot: Save several bytes in decompressor (Lenny Szubowicz) [RHEL-2505]
- fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super (Audra Mitchell) [RHEL-20614] {CVE-2024-0841}
- net/gve: update check for little-endianness in gve kconfig (Joshua Washington) [RHEL-29030]
Resolves: RHEL-20614, RHEL-2505, RHEL-29030

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2024-03-19 21:50:06 +01:00
.gitignore kernel-4.18.0-478.el8 2023-03-16 11:13:21 +01:00
centossecureboot201.cer kernel-4.18.0-479.el8 2023-03-18 18:21:45 +01:00
centossecurebootca2.cer kernel-4.18.0-479.el8 2023-03-18 18:21:45 +01:00
check-kabi Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
cpupower.config Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
cpupower.service Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
filter-aarch64.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
filter-modules.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
filter-ppc64le.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
filter-s390x.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
filter-x86_64.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
gating.yaml kernel-4.18.0-514.el8 2023-09-19 11:23:29 +02:00
generate_all_configs.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
generate_bls_conf.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
kernel-aarch64-debug.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-aarch64.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-ppc64le-debug.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-ppc64le.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-s390x-debug.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-s390x-zfcpdump.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-s390x.config kernel-4.18.0-529.el8 2023-12-05 23:43:57 +01:00
kernel-x86_64-debug.config kernel-4.18.0-536.el8 2024-01-18 13:59:10 +01:00
kernel-x86_64.config kernel-4.18.0-536.el8 2024-01-18 13:59:10 +01:00
kernel.spec kernel-4.18.0-547.el8 2024-03-19 21:50:06 +01:00
kvm_stat.logrotate Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
linux-kernel-test.patch Import rpm: c8s 2023-02-27 13:50:04 -05:00
mod-blacklist.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
mod-extra.list Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
mod-internal.list kernel-4.18.0-528.el8 2023-11-30 12:02:34 +01:00
mod-sign.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
Module.kabi_aarch64 kernel-4.18.0-517.el8 2023-10-10 23:55:25 +02:00
Module.kabi_dup_aarch64 Import rpm: c8s 2023-02-27 13:50:04 -05:00
Module.kabi_dup_ppc64le Import rpm: c8s 2023-02-27 13:50:04 -05:00
Module.kabi_dup_s390x Import rpm: c8s 2023-02-27 13:50:04 -05:00
Module.kabi_dup_x86_64 Import rpm: c8s 2023-02-27 13:50:04 -05:00
Module.kabi_ppc64le kernel-4.18.0-517.el8 2023-10-10 23:55:25 +02:00
Module.kabi_s390x kernel-4.18.0-517.el8 2023-10-10 23:55:25 +02:00
Module.kabi_x86_64 kernel-4.18.0-517.el8 2023-10-10 23:55:25 +02:00
parallel_xz.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
process_configs.sh Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00
redhatsecureboot302.cer kernel-4.18.0-479.el8 2023-03-17 17:01:33 +01:00
redhatsecureboot303.cer kernel-4.18.0-479.el8 2023-03-17 17:01:33 +01:00
redhatsecureboot501.cer Import rpm: c8s 2023-02-27 13:50:04 -05:00
redhatsecurebootca3.cer Import rpm: c8s 2023-02-27 13:50:04 -05:00
redhatsecurebootca7.cer Import rpm: c8s 2023-02-27 13:50:04 -05:00
rheldup3.x509 kernel-4.18.0-478.el8 2023-03-16 11:13:21 +01:00
rhelkpatch1.x509 kernel-4.18.0-478.el8 2023-03-16 11:13:21 +01:00
rpminspect.yaml Auto sync2gitlab import of kernel-4.18.0-448.el8.src.rpm 2023-01-12 18:05:16 +00:00
sources kernel-4.18.0-547.el8 2024-03-19 21:50:06 +01:00
x509.genkey Auto sync2gitlab import of kernel-4.18.0-373.el8.src.rpm 2022-05-26 09:59:47 -04:00