kernel/Makefile.rhelver
Patrick Talbert 9a42f39e87 kernel-5.14.0-91.el9
* Sat May 14 2022 Patrick Talbert <ptalbert@redhat.com> [5.14.0-91.el9]
- redhat/configs: Enable CONFIG_AMD_HSMP for x86_64 (John Allen) [2072235]
- platform/x86: Add AMD system management interface (John Allen) [2072235]
- scsi: core: Fix sbitmap depth in scsi_realloc_sdev_budget_map() (Ewan D. Milne) [2071832]
- lib/sbitmap: allocate sb->map via kvzalloc_node (Ewan D. Milne) [2071832]
- scsi: core: sd: Add silence_suspend flag to suppress some PM messages (Ewan D. Milne) [2071832]
- scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters (Ewan D. Milne) [2071832]
- scsi: core: Put LLD module refcnt after SCSI device is released (Ewan D. Milne) [2071832]
- sd: delay calling free_opal_dev (Ewan D. Milne) [2071832]
- sd: call sd_zbc_release_disk before releasing the scsi_device reference (Ewan D. Milne) [2071832]
- sd: rename the scsi_disk.dev field (Ewan D. Milne) [2071832]
- scsi: don't use disk->private_data to find the scsi_driver (Ewan D. Milne) [2071832]
- scsi: core: Reallocate device's budget map on queue depth change (Ewan D. Milne) [2071832]
- scsi: core: Fix scsi_mode_select() interface (Ewan D. Milne) [2071832]
- scsi: sr: Don't use GFP_DMA (Ewan D. Milne) [2071832]
- scsi: core: Fix scsi_device_max_queue_depth() (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Fix buffer size of REPORT ZONES command (Ewan D. Milne) [2071832]
- scsi: sd_zbc: Clean up sd_zbc_parse_report() setting of wp (Ewan D. Milne) [2071832]
- scsi: sd_zbc: Simplify zone full condition check (Ewan D. Milne) [2071832]
- scsi: core: Show SCMD_LAST in text form (Ewan D. Milne) [2071832]
- scsi: core: Declare 'scsi_scan_type' static (Ewan D. Milne) [2071832]
- scsi: core: Suppress a kernel-doc warning (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Zero clear zones at reset write pointer (Ewan D. Milne) [2071832]
- scsi: core: sysfs: Fix setting device state to SDEV_RUNNING (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() (Ewan D. Milne) [2071832]
- scsi: core: Use eh_timeout for START STOP UNIT (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Fix type in min_t to avoid stack OOB (Ewan D. Milne) [2071832]
- scsi: core: Simplify control flow in scmd_eh_abort_handler() (Ewan D. Milne) [2071832]
- scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run (Ewan D. Milne) [2071832]
- scsi: core: sysfs: Fix hang when device state is set via sysfs (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Don't call kcalloc() if size arg is zero (Ewan D. Milne) [2071832]
- scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd() (Ewan D. Milne) [2071832]
- scsi: scsi_ioctl: Validate command size (Ewan D. Milne) [2071832]
- scsi: sr: Remove duplicate assignment (Ewan D. Milne) [2071832]
- scsi: sd: add concurrent positioning ranges support (Ewan D. Milne) [2071832]
- scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions (Ewan D. Milne) [2071832]
- scsi: sr: Add error handling support for add_disk() (Ewan D. Milne) [2071832]
- scsi: sd: Add error handling support for add_disk() (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs() (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Fix out-of-bound read in resp_readcap16() (Ewan D. Milne) [2071832]
- scsi: sd: Print write through due to no caching mode page as warning (Ewan D. Milne) [2071832]
- scsi: sd: Fix crashes in sd_resume_runtime() (Ewan D. Milne) [2071832]
- scsi: core: pm: Only runtime resume if necessary (Ewan D. Milne) [2071832]
- scsi: sd: Rename sd_resume() into sd_resume_system() (Ewan D. Milne) [2071832]
- scsi: core: pm: Rely on the device driver core for async power management (Ewan D. Milne) [2071832]
- scsi: core: Fix spelling in a source code comment (Ewan D. Milne) [2071832]
- scsi: sd: Fix sd_do_mode_sense() buffer length handling (Ewan D. Milne) [2071832]
- scsi: core: Fix scsi_mode_select() buffer length handling (Ewan D. Milne) [2071832]
- scsi: core: Fix scsi_mode_sense() buffer length handling (Ewan D. Milne) [2071832]
- scsi: core: Delete scsi_{get,free}_host_dev() (Ewan D. Milne) [2071832]
- scsi: core: Remove 'current_tag' (Ewan D. Milne) [2071832]
- scsi: acornscsi: Remove tagged queuing vestiges (Ewan D. Milne) [2071832]
- scsi: fas216: Kill scmd->tag (Ewan D. Milne) [2071832]
- scsi: core: Remove include <scsi/scsi_host.h> from scsi_cmnd.h (Ewan D. Milne) [2071832]
- scsi: sd_zbc: Support disks with more than 2**32 logical blocks (Ewan D. Milne) [2071832]
- scsi: sd: Make sd_spinup_disk() less noisy (Ewan D. Milne) [2071832]
- scsi: sr: Fix spelling mistake "does'nt" -> "doesn't" (Ewan D. Milne) [2071832]
- scsi: sd_zbc: Ensure buffer size is aligned to SECTOR_SIZE (Ewan D. Milne) [2071832]
- scsi: sd: Free scsi_disk device via put_device() (Ewan D. Milne) [2071832]
- scsi: sd: Do not exit sd_spinup_disk() quietly (Ewan D. Milne) [2071832]
- scsi: core: Remove scsi_cmnd.tag (Ewan D. Milne) [2071832]
- scsi: ibmvfc: Stop using scsi_cmnd.tag (Ewan D. Milne) [2071832]
- scsi: fnic: Stop setting scsi_cmnd.tag (Ewan D. Milne) [2071832]
- scsi: fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: wd719: Stop using scsi_cmnd.tag (Ewan D. Milne) [2071832]
- scsi: core: Add helper to return number of logical blocks in a request (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request (Ewan D. Milne) [2071832]
- scsi: core: Introduce the scsi_cmd_to_rq() function (Ewan D. Milne) [2071832]
- scsi: core: Add BLIST_IGN_MEDIA_CHANGE for Ultra HS-SD/MMC USB card readers (Ewan D. Milne) [2071832]
- scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume() (Ewan D. Milne) [2071832]
- scsi: core: Add new flag BLIST_IGN_MEDIA_CHANGE (Ewan D. Milne) [2071832]
- scsi: core: Make scsi_get_lba() return the LBA (Ewan D. Milne) [2071832]
- scsi: core: Introduce scsi_get_sector() (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Improve RDPROTECT/WRPROTECT handling (Ewan D. Milne) [2071832]
- scsi: scsi_debug: Remove dump_sector() (Ewan D. Milne) [2071832]
- scsi: core: Add scsi_prot_ref_tag() helper (Ewan D. Milne) [2071832]
- genirq/affinity: Consider that CPUs on nodes can be unbalanced (Ming Lei) [2074315]
- Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" (Tomas Henzl) [2042790]
- ata: pata_pxa: Use platform_get_irq() to get the interrupt (Tomas Henzl) [2042790]
- ata: Drop commas after OF match table sentinels (Tomas Henzl) [2042790]
- ata: ahci: Rename board_ahci_mobile (Tomas Henzl) [2042790]
- ata: pata_hpt37x: merge transfer mode setting methods (Tomas Henzl) [2042790]
- ata: libata-sff: use *switch* statement in ata_sff_dev_classify() (Tomas Henzl) [2042790]
- ata: add/use ata_taskfile::{error|status} fields (Tomas Henzl) [2042790]
- ata: Kconfig: fix sata gemini compile test condition (Tomas Henzl) [2042790]
- ata: libata-scsi: use *switch* statements to check SCSI command codes (Tomas Henzl) [2042790]
- ata: libata-sff: refactor ata_sff_altstatus() (Tomas Henzl) [2042790]
- ata: libata-sff: refactor ata_sff_set_devctl() (Tomas Henzl) [2042790]
- ata: libata-sff: make ata_resources_present() return 'bool' (Tomas Henzl) [2042790]
- ata: pata_hpt3x2n: disable fast interrupts in prereset() method (Tomas Henzl) [2042790]
- ata: pata_hpt37x: disable fast interrupts in prereset() method (Tomas Henzl) [2042790]
- ata: pata_hpt366: disable fast interrupts in prereset() method (Tomas Henzl) [2042790]
- ata: pata_mpc52xx: use GFP_KERNEL (Tomas Henzl) [2042790]
- ata: sata_rcar: drop unused #define's (Tomas Henzl) [2042790]
- ata: pata_hpt366: check channel enable bits (Tomas Henzl) [2042790]
- ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool' (Tomas Henzl) [2042790]
- ata: pata_samsung_cf: make pata_s3c_devchk() return 'bool' (Tomas Henzl) [2042790]
- ata: libata-sff: make ata_devchk() return 'bool' (Tomas Henzl) [2042790]
- ata: pata_hpt3x2n: drop unused 'struct hpt_chip' (Tomas Henzl) [2042790]
- ata: pata_hpt3x2n: drop unused HPT_PCI_FAST (Tomas Henzl) [2042790]
- ata: pata_artop: use *switch* in atp8xx_fixup() (Tomas Henzl) [2042790]
- ata: pata_artop: use *switch* in artop_init_one() (Tomas Henzl) [2042790]
- pata_hpt3x2n: fix writing to wrong register in hpt3x2n_bmdma_stop() (Tomas Henzl) [2042790]
- pata_hpt3x2n: check channel enable bits (Tomas Henzl) [2042790]
- ata: libata: make ata_host_suspend() *void* (Tomas Henzl) [2042790]
- ata: libata: ata_{sff|std}_prereset() always return 0 (Tomas Henzl) [2042790]
- ata: ahci: Skip 200 ms debounce delay for Marvell 88SE9235 (Tomas Henzl) [2042790]
- ata: libata-acpi: kill ata_acpi_on_suspend() (Tomas Henzl) [2042790]
- ata: libata-scsi: Simplify scsi_XX_lba_len() (Tomas Henzl) [2042790]
- ata: libata-scsi: Simplify ata_scsi_mode_select_xlat() (Tomas Henzl) [2042790]
- ata: libata-scsi: Cleanup ata_get_xlat_func() (Tomas Henzl) [2042790]
- ata: pata_pdc202xx_old: make static read-only array pio_timing const (Tomas Henzl) [2042790]
- ata: pata_atiixp: make static read-only arrays const (Tomas Henzl) [2042790]
- ata: pata_platform: Make use of platform_get_mem_or_io() (Tomas Henzl) [2042790]
- ata: pata_hpt37x: disable primary channel on HPT371 (Tomas Henzl) [2042790]
- ata: pata_hpt37x: fix PCI clock detection (Tomas Henzl) [2042790]
- ata: libata-core: Disable TRIM on M88V29 (Tomas Henzl) [2042790]
- ata: sata_fsl: fix sscanf() and sysfs_emit() format strings (Tomas Henzl) [2042790]
- ata: libata-core: Fix ata_dev_config_cpr() (Tomas Henzl) [2042790]
- ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage (Tomas Henzl) [2042790]
- ata: pata_platform: Fix a NULL pointer dereference in __pata_platform_probe() (Tomas Henzl) [2042790]
- ata: pata_octeon_cf: fix call to trace_ata_bmdma_stop() (Tomas Henzl) [2042790]
- ata: pata_ali: remove redundant return statement (Tomas Henzl) [2042790]
- ata: ahci: Add support for AMD A85 FCH (Hudson D4) (Tomas Henzl) [2042790]
- ata: libata: Rename link flag ATA_LFLAG_NO_DB_DELAY (Tomas Henzl) [2042790]
- ata: libata-scsi: simplify __ata_scsi_queuecmd() (Tomas Henzl) [2042790]
- ata: pata_of_platform: Use platform_get_irq_optional() to get the interrupt (Tomas Henzl) [2042790]
- ata: pata_samsung_cf: add compile test support (Tomas Henzl) [2042790]
- ata: pata_pxa: add compile test support (Tomas Henzl) [2042790]
- ata: pata_imx: add compile test support (Tomas Henzl) [2042790]
- ata: pata_ftide010: add compile test support (Tomas Henzl) [2042790]
- ata: pata_cs5535: add compile test support (Tomas Henzl) [2042790]
- ata: pata_octeon_cf: remove redundant val variable (Tomas Henzl) [2042790]
- ata: fix read_id() ata port operation interface (Tomas Henzl) [2042790]
- ata: ahci_xgene: use correct type for port mmio address (Tomas Henzl) [2042790]
- ata: sata_fsl: fix cmdhdr_tbl_entry and prde struct definitions (Tomas Henzl) [2042790]
- ata: sata_fsl: fix scsi host initialization (Tomas Henzl) [2042790]
- ata: pata_bk3710: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_seattle: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_xgene: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_tegra: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_sunxi: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_mvebu: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_mtk: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_dm816: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_da850: add compile test support (Tomas Henzl) [2042790]
- ata: ahci_brcm: add compile test support (Tomas Henzl) [2042790]
- ata: sata_fsl: add compile test support (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: Remove debug compile options (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: remove 'check_status' argument (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: drop DEBUG_NCQ (Tomas Henzl) [2042790]
- ata: libata-scsi: rework ata_dump_status to avoid using pr_cont() (Tomas Henzl) [2042790]
- ata: pata_hpt366: convert pr_warn() calls (Tomas Henzl) [2042790]
- ata: sata_gemini: convert pr_err() calls (Tomas Henzl) [2042790]
- ata: pata_hpt3x2n: convert pr_XXX() calls (Tomas Henzl) [2042790]
- ata: pata_octeon_cf: Replace pr_XXX() calls with structured logging (Tomas Henzl) [2042790]
- ata: pata_hpt37x: convert pr_XXX() calls (Tomas Henzl) [2042790]
- ata: sata_mv: convert remaining printk() to structured logging (Tomas Henzl) [2042790]
- ata: sata_sx4: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_sil680: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_serverworks: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_rz1000: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_marvell: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_it821x: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_cypress: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_cs5536: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_cs5520: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_cmd64x: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_cmd640: convert printk() calls (Tomas Henzl) [2042790]
- ata: pata_atp867x: convert printk() calls (Tomas Henzl) [2042790]
- ata: libata: remove debug compilation switches (Tomas Henzl) [2042790]
- ata: libata: remove 'new' ata message handling (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_drv() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_info() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_probe() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_warn() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_malloc() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_ctl() (Tomas Henzl) [2042790]
- ata: libata: drop ata_msg_error() and ata_msg_intr() (Tomas Henzl) [2042790]
- ata: sata_sx4: add module parameter 'dimm_test' (Tomas Henzl) [2042790]
- ata: sata_sx4: Drop pointless VPRINTK() calls and convert the remaining ones (Tomas Henzl) [2042790]
- ata: sata_sil: Drop pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: sata_fsl: convert VPRINTK() calls to ata_port_dbg() (Tomas Henzl) [2042790]
- ata: sata_nv: drop pointless VPRINTK() calls and convert remaining ones (Tomas Henzl) [2042790]
- ata: sata_mv: Drop pointless VPRINTK() call and convert the remaining one (Tomas Henzl) [2042790]
- ata: sata_inic162x: Drop pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: sata_rcar: Drop pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: sata_qstor: Drop pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: sata_promise: Drop pointless VPRINTK() calls and convert the remaining ones (Tomas Henzl) [2042790]
- ata: pata_via: Drop pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: pata_octeon_cf: Drop pointless VPRINTK() calls and convert the remaining one (Tomas Henzl) [2042790]
- ata: pdc_adma: Drop pointless VPRINTK() calls and remove disabled NCQ debugging (Tomas Henzl) [2042790]
- ata: ahci: Drop pointless VPRINTK() calls and convert the remaining ones (Tomas Henzl) [2042790]
- ata: libata: remove pointless VPRINTK() calls (Tomas Henzl) [2042790]
- ata: pata_pdc2027x: Replace PDPRINTK() with standard ata logging (Tomas Henzl) [2042790]
- ata: sata_qstor: replace DPRINTK() with dev_dbg() (Tomas Henzl) [2042790]
- ata: sata_rcar: replace DPRINTK() with ata_port_dbg() (Tomas Henzl) [2042790]
- ata: sata_fsl: move DPRINTK to ata debugging (Tomas Henzl) [2042790]
- ata: pdc_adma: Remove DPRINTK call (Tomas Henzl) [2042790]
- ata: pata_octeon_cf: remove DPRINTK() macro in interrupt context (Tomas Henzl) [2042790]
- ata: sata_mv: replace DPRINTK with dynamic debugging (Tomas Henzl) [2042790]
- ata: sata_mv: kill 'port' argument in mv_dump_all_regs() (Tomas Henzl) [2042790]
- ata: libata: move DPRINTK to ata debugging (Tomas Henzl) [2042790]
- ata: libata: revamp ata_get_cmd_descript() (Tomas Henzl) [2042790]
- ata: libata: move ata_{port,link,dev}_dbg to standard pr_XXX() macros (Tomas Henzl) [2042790]
- ata: libata: add tracepoints for ATA error handling (Tomas Henzl) [2042790]
- ata: libata-scsi: drop DPRINTK calls for cdb translation (Tomas Henzl) [2042790]
- ata: libata-sff: tracepoints for HSM state machine (Tomas Henzl) [2042790]
- ata: libata: tracepoints for bus-master DMA (Tomas Henzl) [2042790]
- ata: libata: add qc_prep tracepoint (Tomas Henzl) [2042790]
- ata: libata: add reset tracepoints (Tomas Henzl) [2042790]
- ata: libata: sanitize ATA_HORKAGE_DUMP_ID (Tomas Henzl) [2042790]
- ata: libata: move ata_dump_id() to dynamic debugging (Tomas Henzl) [2042790]
- ata: libata: Add ata_port_classify() helper (Tomas Henzl) [2042790]
- ata: libata: whitespace cleanup (Tomas Henzl) [2042790]
- ata: libata: remove pointless debugging messages (Tomas Henzl) [2042790]
- ata: libata: use min() to make code cleaner (Tomas Henzl) [2042790]
- ata: libahci_platform: Get rid of dup message when IRQ can't be retrieved (Tomas Henzl) [2042790]
- ata: libahci_platform: Remove bogus 32-bit DMA mask attempt (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: Remove unused forward declaration (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: Use temporary variable for struct device (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: Use devm_platform_*ioremap_resource() APIs (Tomas Henzl) [2042790]
- ata: sata_fsl: use sysfs_emit() (Tomas Henzl) [2042790]
- ata: ahci: use sysfs_emit() (Tomas Henzl) [2042790]
- ata: libata-scsi: use sysfs_emit() (Tomas Henzl) [2042790]
- ata: libata-sata: use sysfs_emit() (Tomas Henzl) [2042790]
- ata: sata_fsl: Use struct_group() for memcpy() region (Tomas Henzl) [2042790]
- ata: pata_ali: no need to initialise statics to 0 (Tomas Henzl) [2042790]
- libata: if T_LENGTH is zero, dma direction should be DMA_NONE (Tomas Henzl) [2042790]
- libata: add horkage for ASMedia 1092 (Tomas Henzl) [2042790]
- ata: ahci_ceva: Fix id array access in ceva_ahci_read_id() (Tomas Henzl) [2042790]
- ata: replace snprintf in show functions with sysfs_emit (Tomas Henzl) [2042790]
- sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl (Tomas Henzl) [2042790]
- sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl (Tomas Henzl) [2042790]
- pata_falcon: Avoid type warnings from sparse (Tomas Henzl) [2042790]
- ata: libahci: Adjust behavior when StorageD3Enable _DSD is set (Tomas Henzl) [2042790]
- ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile (Tomas Henzl) [2042790]
- ata: libata: add missing ata_identify_page_supported() calls (Tomas Henzl) [2042790]
- ata: libata: improve ata_read_log_page() error message (Tomas Henzl) [2042790]
- libata: add horkage for missing Identify Device log (Tomas Henzl) [2042790]
- ata: sata_highbank: Remove unnecessary print function dev_err() (Tomas Henzl) [2042790]
- libata: fix read log timeout value (Tomas Henzl) [2042790]
- pata_radisys: fix checking of DMA state (Tomas Henzl) [2042790]
- pata_optidma: fix checking of DMA state (Tomas Henzl) [2042790]
- pata_amd: fix checking of DMA state (Tomas Henzl) [2042790]
- pata_ali: fix checking of DMA state (Tomas Henzl) [2042790]
- libata-scsi: fix checking of DMA state (Tomas Henzl) [2042790]
- libata: fix checking of DMA state (Tomas Henzl) [2042790]
- Add AHCI support for ASM1062+JBM575 cards (Tomas Henzl) [2042790]
- ahci: remove duplicated PCI device IDs (Tomas Henzl) [2042790]
- libata: support concurrent positioning ranges log (Tomas Henzl) [2042790]
- ata: sata_mv: Fix the error handling of mv_chip_id() (Tomas Henzl) [2042790]
- ata: ahci_platform: fix null-ptr-deref in ahci_platform_enable_regulators() (Tomas Henzl) [2042790]
- pata_legacy: fix a couple uninitialized variable bugs (Tomas Henzl) [2042790]
- libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD. (Tomas Henzl) [2042790]
- libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs (Tomas Henzl) [2042790]
- pata: ixp4xx: Rewrite to use device tree (Tomas Henzl) [2042790]
- pata: ixp4xx: Refer to cmd and ctl rather than csN (Tomas Henzl) [2042790]
- pata: ixp4xx: Use IS_ENABLED() to determine endianness (Tomas Henzl) [2042790]
- pata: ixp4xx: Use local dev variable (Tomas Henzl) [2042790]
- include:libata: fix boolreturn.cocci warnings (Tomas Henzl) [2042790]
- libata: Introduce ncq_prio_supported sysfs sttribute (Tomas Henzl) [2042790]
- libata: print feature list on device scan (Tomas Henzl) [2042790]
- libata: fix ata_read_log_page() warning (Tomas Henzl) [2042790]
- libata: cleanup NCQ priority handling (Tomas Henzl) [2042790]
- libata: cleanup ata_dev_configure() (Tomas Henzl) [2042790]
- libata: cleanup device sleep capability detection (Tomas Henzl) [2042790]
- libata: simplify ata_scsi_rbuf_fill() (Tomas Henzl) [2042790]
- libata: fix ata_host_start() (Tomas Henzl) [2042790]
- ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init() (Tomas Henzl) [2042790]
- redhat/configs: aarch64: Enable NXP i.MX8M SoCs (Mark Salter) [2069626]
- scsi: qedf: Stop using the SCSI pointer (Nilesh Javali) [2046632]
- scsi: qedf: Change context reset messages to ratelimited (Nilesh Javali) [2046632]
- scsi: qedf: Fix refcount issue when LOGO is received during TMF (Nilesh Javali) [2046632]
- scsi: qedf: Add stag_work to all the vports (Nilesh Javali) [2046632]
- scsi: qedf: Fix potential dereference of NULL pointer (Nilesh Javali) [2046632]
- scsi: qedf: Fix error codes in qedf_alloc_global_queues() (Nilesh Javali) [2046632]
Resolves: rhbz#2072235, rhbz#2071832, rhbz#2074315, rhbz#2042790, rhbz#2069626, rhbz#2046632

Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
2022-05-14 06:50:13 +00:00

68 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 1
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 91
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif