93a2c8d89c
* Wed Jun 03 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-713.el9] - rbd: eliminate a race in lock_dwork draining on unmap (CKI Backport Bot) [RHEL-180190] - init/Kconfig: remove CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND (Waiman Long) [RHEL-166727] - update workarounds for gcc "asm goto" issue (Waiman Long) [RHEL-166727] - init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash (Waiman Long) [RHEL-166727] - work around gcc bugs with 'asm goto' with outputs (Waiman Long) [RHEL-166727] - compiler-gcc.h: remove ancient workaround for gcc PR 58670 (Waiman Long) [RHEL-166727] - powerpc/64: Force inlining of prevent_user_access() and set_kuap() (Waiman Long) [RHEL-166727] Resolves: RHEL-166727, RHEL-180190 Signed-off-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com>
7282 lines
448 KiB
RPMSpec
7282 lines
448 KiB
RPMSpec
# All Global changes to build and install go here.
|
|
# Per the below section about __spec_install_pre, any rpm
|
|
# environment changes that affect %%install need to go
|
|
# here before the %%install macro is pre-built.
|
|
|
|
# Disable LTO in userspace packages.
|
|
%global _lto_cflags %{nil}
|
|
|
|
# Option to enable compiling with clang instead of gcc.
|
|
%bcond_with toolchain_clang
|
|
|
|
%if %{with toolchain_clang}
|
|
%global toolchain clang
|
|
%endif
|
|
|
|
# Compile the kernel with LTO (only supported when building with clang).
|
|
%bcond_with clang_lto
|
|
|
|
%if %{with clang_lto} && %{without toolchain_clang}
|
|
{error:clang_lto requires --with toolchain_clang}
|
|
%endif
|
|
|
|
# Cross compile on copr for arm
|
|
# See https://bugzilla.redhat.com/1879599
|
|
%if 0%{?_with_cross_arm:1}
|
|
%global _target_cpu armv7hl
|
|
%global _arch arm
|
|
%global _build_arch arm
|
|
%global _with_cross 1
|
|
%endif
|
|
|
|
# RPM macros strip everything in BUILDROOT, either with __strip
|
|
# or find-debuginfo.sh. Make use of __spec_install_post override
|
|
# and save/restore binaries we want to package as unstripped.
|
|
%define buildroot_unstripped %{_builddir}/root_unstripped
|
|
%define buildroot_save_unstripped() \
|
|
(cd %{buildroot}; cp -rav --parents -t %{buildroot_unstripped}/ %1 || true) \
|
|
%{nil}
|
|
%define __restore_unstripped_root_post \
|
|
echo "Restoring unstripped artefacts %{buildroot_unstripped} -> %{buildroot}" \
|
|
cp -rav %{buildroot_unstripped}/. %{buildroot}/ \
|
|
%{nil}
|
|
|
|
# The kernel's %%install section is special
|
|
# Normally the %%install section starts by cleaning up the BUILD_ROOT
|
|
# like so:
|
|
#
|
|
# %%__spec_install_pre %%{___build_pre}\
|
|
# [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\
|
|
# mkdir -p `dirname "$RPM_BUILD_ROOT"`\
|
|
# mkdir "$RPM_BUILD_ROOT"\
|
|
# %%{nil}
|
|
#
|
|
# But because of kernel variants, the %%build section, specifically
|
|
# BuildKernel(), moves each variant to its final destination as the
|
|
# variant is built. This violates the expectation of the %%install
|
|
# section. As a result we snapshot the current env variables and
|
|
# purposely leave out the removal section. All global wide changes
|
|
# should be added above this line otherwise the %%install section
|
|
# will not see them.
|
|
%global __spec_install_pre %{___build_pre}
|
|
|
|
# Replace '-' with '_' where needed so that variants can use '-' in
|
|
# their name.
|
|
%define uname_suffix() %{lua:
|
|
local flavour = rpm.expand('%{?1:+%{1}}')
|
|
flavour = flavour:gsub('-', '_')
|
|
if flavour ~= '' then
|
|
print(flavour)
|
|
end
|
|
}
|
|
|
|
# This returns the main kernel tied to a debug variant. For example,
|
|
# kernel-debug is the debug version of kernel, so we return an empty
|
|
# string. However, kernel-64k-debug is the debug version of kernel-64k,
|
|
# in this case we need to return "64k", and so on. This is used in
|
|
# macros below where we need this for some uname based requires.
|
|
%define uname_variant() %{lua:
|
|
local flavour = rpm.expand('%{?1:%{1}}')
|
|
_, _, main, sub = flavour:find("(%w+)-(.*)")
|
|
if main then
|
|
print("+" .. main)
|
|
end
|
|
}
|
|
|
|
|
|
# At the time of this writing (2019-03), RHEL8 packages use w2.xzdio
|
|
# compression for rpms (xz, level 2).
|
|
# Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins
|
|
# to compress by single-threaded xz. Switch to threaded compression,
|
|
# and from level 2 to 3 to keep compressed sizes close to "w2" results.
|
|
#
|
|
# NB: if default compression in /usr/lib/rpm/redhat/macros ever changes,
|
|
# this one might need tweaking (e.g. if default changes to w3.xzdio,
|
|
# change below to w4T.xzdio):
|
|
#
|
|
# This is disabled on i686 as it triggers oom errors
|
|
|
|
%ifnarch i686
|
|
%define _binary_payload w3T.xzdio
|
|
%endif
|
|
|
|
Summary: The Linux kernel
|
|
%if 0%{?fedora}
|
|
%define secure_boot_arch x86_64
|
|
%else
|
|
%define secure_boot_arch x86_64 aarch64 s390x ppc64le
|
|
%endif
|
|
|
|
# Signing for secure boot authentication
|
|
%ifarch %{secure_boot_arch}
|
|
%global signkernel 1
|
|
%else
|
|
%global signkernel 0
|
|
%endif
|
|
|
|
# RHEL/CentOS/Fedora specific .SBAT entries
|
|
%if 0%{?centos}
|
|
%global sbat_suffix centos
|
|
%else
|
|
%if 0%{?fedora}
|
|
%global sbat_suffix fedora
|
|
%else
|
|
%global sbat_suffix rhel
|
|
%endif
|
|
%endif
|
|
|
|
# Sign modules on all arches
|
|
%global signmodules 1
|
|
|
|
# Compress modules only for architectures that build modules
|
|
%ifarch noarch
|
|
%global zipmodules 0
|
|
%else
|
|
%global zipmodules 1
|
|
%endif
|
|
|
|
%ifarch x86_64
|
|
%global efiuki 1
|
|
%else
|
|
%global efiuki 0
|
|
%endif
|
|
|
|
# Default compression algorithm
|
|
%global compression xz
|
|
%global compression_flags --compress
|
|
%global compext xz
|
|
%if %{zipmodules}
|
|
%global zipsed -e 's/\.ko$/\.ko.%compext/'
|
|
# for parallel xz processes, replace with 1 to go back to single process
|
|
%endif
|
|
|
|
%if 0%{?fedora}
|
|
%define primary_target fedora
|
|
%else
|
|
%define primary_target rhel
|
|
%endif
|
|
|
|
#
|
|
# genspec.sh variables
|
|
#
|
|
|
|
# Include Fedora files
|
|
%global include_fedora 0
|
|
# Include RHEL files
|
|
%global include_rhel 1
|
|
# Provide Patchlist.changelog file
|
|
%global patchlist_changelog 0
|
|
# Set debugbuildsenabled to 1 to build separate base and debug kernels
|
|
# (on supported architectures). The kernel-debug-* subpackages will
|
|
# contain the debug kernel.
|
|
# Set debugbuildsenabled to 0 to not build a separate debug kernel, but
|
|
# to build the base kernel using the debug configuration. (Specifying
|
|
# the --with-release option overrides this setting.)
|
|
%define debugbuildsenabled 1
|
|
# define buildid .local
|
|
%define specversion 5.14.0
|
|
%define patchversion 5.14
|
|
%define pkgrelease 713
|
|
%define kversion 5
|
|
%define tarfile_release 5.14.0-713.el9
|
|
# This is needed to do merge window version magic
|
|
%define patchlevel 14
|
|
# This allows pkg_release to have configurable %%{?dist} tag
|
|
%define specrelease 713%{?buildid}%{?dist}
|
|
# This defines the kabi tarball version
|
|
%define kabiversion 5.14.0-713.el9
|
|
|
|
#
|
|
# End of genspec.sh variables
|
|
#
|
|
|
|
%define pkg_release %{specrelease}
|
|
|
|
# libexec dir is not used by the linker, so the shared object there
|
|
# should not be exported to RPM provides
|
|
%global __provides_exclude_from ^%{_libexecdir}/kselftests
|
|
|
|
# The following build options are enabled by default, but may become disabled
|
|
# by later architecture-specific checks. These can also be disabled by using
|
|
# --without <opt> in the rpmbuild command, or by forcing these values to 0.
|
|
#
|
|
# standard kernel
|
|
%define with_up %{?_without_up: 0} %{?!_without_up: 1}
|
|
# kernel PAE (only valid for ARM (lpae))
|
|
%define with_pae %{?_without_pae: 0} %{?!_without_pae: 1}
|
|
# kernel-debug
|
|
%define with_debug %{?_without_debug: 0} %{?!_without_debug: 1}
|
|
# kernel-zfcpdump (s390 specific kernel for zfcpdump)
|
|
%define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1}
|
|
# kernel-64k (aarch64 kernel with 64K page_size)
|
|
%define with_arm64_64k %{?_without_arm64_64k: 0} %{?!_without_arm64_64k: 1}
|
|
# kernel-rt (x86_64 and aarch64 only PREEMPT_RT enabled kernel)
|
|
%define with_realtime %{?_without_realtime: 0} %{?!_without_realtime: 1}
|
|
# kernel-rt-64k (aarch64 RT kernel with 64K page_size)
|
|
%define with_realtime_arm64_64k %{?_without_realtime_arm64_64k: 0} %{?!_without_realtime_arm64_64k: 1}
|
|
# kernel-doc
|
|
%define with_doc %{?_without_doc: 0} %{?!_without_doc: 1}
|
|
# kernel-headers
|
|
%define with_headers %{?_without_headers: 0} %{?!_without_headers: 1}
|
|
%define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1}
|
|
# perf
|
|
%define with_perf %{?_without_perf: 0} %{?!_without_perf: 1}
|
|
# tools
|
|
%define with_tools %{?_without_tools: 0} %{?!_without_tools: 1}
|
|
# kernel-debuginfo
|
|
%define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1}
|
|
# kernel-abi-stablelists
|
|
%define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1}
|
|
# internal samples and selftests
|
|
%define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1}
|
|
#
|
|
# Additional options for user-friendly one-off kernel building:
|
|
#
|
|
# Only build the base kernel (--with baseonly):
|
|
%define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0}
|
|
# Only build the pae kernel (--with paeonly):
|
|
%define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0}
|
|
# Only build the debug kernel (--with dbgonly):
|
|
%define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0}
|
|
# Only build the realtime kernel (--with rtonly):
|
|
%define with_rtonly %{?_with_rtonly: 1} %{?!_with_rtonly: 0}
|
|
# Control whether we perform a compat. check against published ABI.
|
|
%define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1}
|
|
# Temporarily disable kabi checks until RC.
|
|
%define with_kabichk 0
|
|
# Control whether we perform a compat. check against DUP ABI.
|
|
%define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0}
|
|
#
|
|
# Control whether to run an extensive DWARF based kABI check.
|
|
# Note that this option needs to have baseline setup in SOURCE300.
|
|
%define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1}
|
|
%define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0}
|
|
#
|
|
# Control whether to install the vdso directories.
|
|
%define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1}
|
|
#
|
|
# should we do C=1 builds with sparse
|
|
%define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0}
|
|
#
|
|
# Cross compile requested?
|
|
%define with_cross %{?_with_cross: 1} %{?!_with_cross: 0}
|
|
#
|
|
# build a release kernel on rawhide
|
|
%define with_release %{?_with_release: 1} %{?!_with_release: 0}
|
|
|
|
# verbose build, i.e. no silent rules and V=1
|
|
%define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0}
|
|
|
|
#
|
|
# check for mismatched config options
|
|
%define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1}
|
|
|
|
#
|
|
# gcov support
|
|
%define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0}
|
|
|
|
# Want to build a vanilla kernel build without any non-upstream patches?
|
|
%define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0}
|
|
|
|
%if 0%{?fedora}
|
|
# Kernel headers are being split out into a separate package
|
|
%define with_headers 0
|
|
%define with_cross_headers 0
|
|
# no stablelist
|
|
%define with_kernel_abi_stablelists 0
|
|
# Fedora builds these separately
|
|
%define with_perf 0
|
|
%define with_tools 0
|
|
%endif
|
|
|
|
%if %{with_verbose}
|
|
%define make_opts V=1
|
|
%else
|
|
%define make_opts -s
|
|
%endif
|
|
|
|
%if %{with toolchain_clang}
|
|
%ifarch s390x ppc64le
|
|
%global llvm_ias 0
|
|
%else
|
|
%global llvm_ias 1
|
|
%endif
|
|
%global clang_make_opts HOSTCC=clang CC=clang LLVM_IAS=%{llvm_ias}
|
|
%if %{with clang_lto}
|
|
%global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm
|
|
%endif
|
|
%global make_opts %{make_opts} %{clang_make_opts}
|
|
%endif
|
|
|
|
# turn off debug kernel and kabichk for gcov builds
|
|
%if %{with_gcov}
|
|
%define with_debug 0
|
|
%define with_kabichk 0
|
|
%define with_kabidupchk 0
|
|
%define with_kabidwchk 0
|
|
%define with_kabidw_base 0
|
|
%define with_kernel_abi_stablelists 0
|
|
%endif
|
|
|
|
# turn off kABI DWARF-based check if we're generating the base dataset
|
|
%if %{with_kabidw_base}
|
|
%define with_kabidwchk 0
|
|
%endif
|
|
|
|
%define make_target bzImage
|
|
%define image_install_path boot
|
|
|
|
%define KVERREL %{version}-%{release}.%{_target_cpu}
|
|
%define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g')
|
|
%define hdrarch %_target_cpu
|
|
%define asmarch %_target_cpu
|
|
|
|
%if 0%{!?nopatches:1}
|
|
%define nopatches 0
|
|
%endif
|
|
|
|
%if %{with_vanilla}
|
|
%define nopatches 1
|
|
%endif
|
|
|
|
%if %{with_release}
|
|
%define debugbuildsenabled 1
|
|
%endif
|
|
|
|
%if !%{with_debuginfo}
|
|
%define _enable_debug_packages 0
|
|
%endif
|
|
%define debuginfodir /usr/lib/debug
|
|
# Needed because we override almost everything involving build-ids
|
|
# and debuginfo generation. Currently we rely on the old alldebug setting.
|
|
%global _build_id_links alldebug
|
|
|
|
# kernel PAE is only built on ARMv7
|
|
%ifnarch armv7hl
|
|
%define with_pae 0
|
|
%endif
|
|
|
|
# RT kernel is only built on x86_64 and aarch64
|
|
%ifnarch x86_64 aarch64
|
|
%define with_realtime 0
|
|
%endif
|
|
|
|
# if requested, only build base kernel
|
|
%if %{with_baseonly}
|
|
%define with_pae 0
|
|
%define with_debug 0
|
|
%define with_realtime 0
|
|
%define with_vdso_install 0
|
|
%define with_perf 0
|
|
%define with_tools 0
|
|
%define with_kernel_abi_stablelists 0
|
|
%define with_selftests 0
|
|
%define with_cross 0
|
|
%define with_cross_headers 0
|
|
%endif
|
|
|
|
# if requested, only build pae kernel
|
|
%if %{with_paeonly}
|
|
%define with_up 0
|
|
%define with_debug 0
|
|
%define with_realtime 0
|
|
%endif
|
|
|
|
# if requested, only build debug kernel
|
|
%if %{with_dbgonly}
|
|
%define with_up 0
|
|
%define with_realtime 0
|
|
%define with_vdso_install 0
|
|
%define with_perf 0
|
|
%define with_tools 0
|
|
%define with_kernel_abi_stablelists 0
|
|
%define with_selftests 0
|
|
%define with_cross 0
|
|
%define with_cross_headers 0
|
|
%endif
|
|
|
|
# if requested, only build realtime kernel
|
|
%if %{with_rtonly}
|
|
%define with_up 0
|
|
%define with_pae 0
|
|
%define with_debug 0
|
|
%define with_vdso_install 0
|
|
%define with_perf 0
|
|
%define with_tools 0
|
|
%define with_kernel_abi_stablelists 0
|
|
%define with_selftests 0
|
|
%define with_cross 0
|
|
%define with_cross_headers 0
|
|
%endif
|
|
|
|
# turn off kABI DUP check and DWARF-based check if kABI check is disabled
|
|
%if !%{with_kabichk}
|
|
%define with_kabidupchk 0
|
|
%define with_kabidwchk 0
|
|
%endif
|
|
|
|
%if %{with_vdso_install}
|
|
%define use_vdso 1
|
|
%endif
|
|
|
|
%ifnarch noarch
|
|
%define with_kernel_abi_stablelists 0
|
|
%endif
|
|
|
|
# Overrides for generic default options
|
|
|
|
# only package docs noarch
|
|
%ifnarch noarch
|
|
%define with_doc 0
|
|
%define doc_build_fail true
|
|
%endif
|
|
|
|
%if 0%{?fedora}
|
|
# don't do debug builds on anything but i686 and x86_64
|
|
%ifnarch i686 x86_64
|
|
%define with_debug 0
|
|
%endif
|
|
%endif
|
|
|
|
# don't build noarch kernels or headers (duh)
|
|
%ifarch noarch
|
|
%define with_up 0
|
|
%define with_realtime 0
|
|
%define with_headers 0
|
|
%define with_cross_headers 0
|
|
%define with_tools 0
|
|
%define with_perf 0
|
|
%define with_selftests 0
|
|
%define with_debug 0
|
|
%define all_arch_configs kernel-%{version}-*.config
|
|
%endif
|
|
|
|
# sparse blows up on ppc
|
|
%ifnarch ppc64le
|
|
%define with_sparse 0
|
|
%endif
|
|
|
|
# zfcpdump mechanism is s390 only
|
|
%ifnarch s390x
|
|
%define with_zfcpdump 0
|
|
%endif
|
|
|
|
# 64k variant only for aarch64
|
|
%ifnarch aarch64
|
|
%define with_arm64_64k 0
|
|
%define with_realtime_arm64_64k 0
|
|
%endif
|
|
|
|
%if 0%{?fedora}
|
|
# This is not for Fedora
|
|
%define with_zfcpdump 0
|
|
%endif
|
|
|
|
# Per-arch tweaks
|
|
|
|
%ifarch i686
|
|
%define asmarch x86
|
|
%define hdrarch i386
|
|
%define all_arch_configs kernel-%{version}-i?86*.config
|
|
%define kernel_image arch/x86/boot/bzImage
|
|
%endif
|
|
|
|
%ifarch x86_64
|
|
%define asmarch x86
|
|
%define all_arch_configs kernel-%{version}-x86_64*.config
|
|
%define kernel_image arch/x86/boot/bzImage
|
|
%endif
|
|
|
|
%ifarch ppc64le
|
|
%define asmarch powerpc
|
|
%define hdrarch powerpc
|
|
%define make_target vmlinux
|
|
%define kernel_image vmlinux
|
|
%define kernel_image_elf 1
|
|
%define use_vdso 0
|
|
%define all_arch_configs kernel-%{version}-ppc64le*.config
|
|
%endif
|
|
|
|
%ifarch s390x
|
|
%define asmarch s390
|
|
%define hdrarch s390
|
|
%define all_arch_configs kernel-%{version}-s390x.config
|
|
%define kernel_image arch/s390/boot/bzImage
|
|
%define vmlinux_decompressor arch/s390/boot/vmlinux
|
|
%endif
|
|
|
|
%ifarch %{arm}
|
|
%define all_arch_configs kernel-%{version}-arm*.config
|
|
%define skip_nonpae_vdso 1
|
|
%define asmarch arm
|
|
%define hdrarch arm
|
|
%define make_target bzImage
|
|
%define kernel_image arch/arm/boot/zImage
|
|
# http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html
|
|
%define kernel_mflags KALLSYMS_EXTRA_PASS=1
|
|
# we only build headers/perf/tools on the base arm arches
|
|
# just like we used to only build them on i386 for x86
|
|
%ifnarch armv7hl
|
|
%define with_headers 0
|
|
%define with_cross_headers 0
|
|
%endif
|
|
# These currently don't compile on armv7
|
|
%define with_selftests 0
|
|
%endif
|
|
|
|
%ifarch aarch64
|
|
%define all_arch_configs kernel-%{version}-aarch64*.config
|
|
%define asmarch arm64
|
|
%define hdrarch arm64
|
|
%define make_target vmlinuz.efi
|
|
%define kernel_image arch/arm64/boot/vmlinuz.efi
|
|
%endif
|
|
|
|
# Should make listnewconfig fail if there's config options
|
|
# printed out?
|
|
%if %{nopatches}
|
|
%define with_configchecks 0
|
|
%endif
|
|
|
|
# To temporarily exclude an architecture from being built, add it to
|
|
# %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we
|
|
# don't build kernel-headers then the new build system will no longer let
|
|
# us use the previous build of that package -- it'll just be completely AWOL.
|
|
# Which is a BadThing(tm).
|
|
|
|
# We only build kernel-headers on the following...
|
|
%if 0%{?fedora}
|
|
%define nobuildarches i386
|
|
%else
|
|
%define nobuildarches i386 i686 %{arm}
|
|
%endif
|
|
|
|
%ifarch %nobuildarches
|
|
# disable BuildKernel commands
|
|
%define with_up 0
|
|
%define with_debug 0
|
|
%define with_pae 0
|
|
%define with_zfcpdump 0
|
|
%define with_arm64_64k 0
|
|
%define with_realtime 0
|
|
%define with_realtime_arm64_64k 0
|
|
|
|
%define with_debuginfo 0
|
|
%define with_perf 0
|
|
%define with_tools 0
|
|
%define with_selftests 0
|
|
%define _enable_debug_packages 0
|
|
%endif
|
|
|
|
# Architectures we build tools/cpupower on
|
|
%if 0%{?fedora}
|
|
%define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64
|
|
%else
|
|
%define cpupowerarchs i686 x86_64 ppc64le aarch64
|
|
%endif
|
|
|
|
%if 0%{?use_vdso}
|
|
|
|
%if 0%{?skip_nonpae_vdso}
|
|
%define _use_vdso 0
|
|
%else
|
|
%define _use_vdso 1
|
|
%endif
|
|
|
|
%else
|
|
%define _use_vdso 0
|
|
%endif
|
|
|
|
# If build of debug packages is disabled, we need to know if we want to create
|
|
# meta debug packages or not, after we define with_debug for all specific cases
|
|
# above. So this must be at the end here, after all cases of with_debug or not.
|
|
%define with_debug_meta 0
|
|
%if !%{debugbuildsenabled}
|
|
%if %{with_debug}
|
|
%define with_debug_meta 1
|
|
%endif
|
|
%define with_debug 0
|
|
%endif
|
|
|
|
|
|
#
|
|
# Packages that need to be installed before the kernel is, because the %%post
|
|
# scripts use them.
|
|
#
|
|
%define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install
|
|
%define initrd_prereq dracut >= 027
|
|
|
|
|
|
Name: kernel
|
|
License: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-2-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-only WITH Linux-syscall-note) OR CDDL-1.0) AND ((GPL-2.0-only WITH Linux-syscall-note) OR Linux-OpenIB) AND ((GPL-2.0-only WITH Linux-syscall-note) OR MIT) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR BSD-3-Clause) AND ((GPL-2.0-or-later WITH Linux-syscall-note) OR MIT) AND Apache-2.0 AND BSD-2-Clause AND BSD-3-Clause AND BSD-3-Clause-Clear AND GFDL-1.1-no-invariants-or-later AND GPL-1.0-or-later AND (GPL-1.0-or-later OR BSD-3-Clause) AND (GPL-1.0-or-later WITH Linux-syscall-note) AND GPL-2.0-only AND (GPL-2.0-only OR Apache-2.0) AND (GPL-2.0-only OR BSD-2-Clause) AND (GPL-2.0-only OR BSD-3-Clause) AND (GPL-2.0-only OR CDDL-1.0) AND (GPL-2.0-only OR GFDL-1.1-no-invariants-or-later) AND (GPL-2.0-only OR GFDL-1.2-no-invariants-only) AND (GPL-2.0-only WITH Linux-syscall-note) AND GPL-2.0-or-later AND (GPL-2.0-or-later OR BSD-2-Clause) AND (GPL-2.0-or-later OR BSD-3-Clause) AND (GPL-2.0-or-later OR CC-BY-4.0) AND (GPL-2.0-or-later WITH GCC-exception-2.0) AND (GPL-2.0-or-later WITH Linux-syscall-note) AND ISC AND LGPL-2.0-or-later AND (LGPL-2.0-or-later OR BSD-2-Clause) AND (LGPL-2.0-or-later WITH Linux-syscall-note) AND LGPL-2.1-only AND (LGPL-2.1-only OR BSD-2-Clause) AND (LGPL-2.1-only WITH Linux-syscall-note) AND LGPL-2.1-or-later AND (LGPL-2.1-or-later WITH Linux-syscall-note) AND (Linux-OpenIB OR GPL-2.0-only) AND (Linux-OpenIB OR GPL-2.0-only OR BSD-2-Clause) AND Linux-man-pages-copyleft AND MIT AND (MIT OR GPL-2.0-only) AND (MIT OR GPL-2.0-or-later) AND (MIT OR LGPL-2.1-only) AND (MPL-1.1 OR GPL-2.0-only) AND (X11 OR GPL-2.0-only) AND (X11 OR GPL-2.0-or-later) AND Zlib AND (copyleft-next-0.3.1 OR GPL-2.0-or-later)
|
|
URL: https://www.kernel.org/
|
|
Version: %{specversion}
|
|
Release: %{pkg_release}
|
|
# DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD.
|
|
# SET %%nobuildarches (ABOVE) INSTEAD
|
|
%if 0%{?fedora}
|
|
ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le
|
|
%else
|
|
ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le
|
|
%endif
|
|
ExclusiveOS: Linux
|
|
%ifnarch %{nobuildarches}
|
|
Requires: kernel-core-uname-r = %{KVERREL}
|
|
Requires: kernel-modules-uname-r = %{KVERREL}
|
|
Requires: kernel-modules-core-uname-r = %{KVERREL}
|
|
Provides: installonlypkg(kernel)
|
|
%endif
|
|
|
|
|
|
#
|
|
# List the packages used during the kernel build
|
|
#
|
|
BuildRequires: kmod, bash, coreutils, tar, git-core, which
|
|
BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk, %compression
|
|
BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++
|
|
BuildRequires: net-tools, hostname, bc, elfutils-devel
|
|
BuildRequires: dwarves
|
|
BuildRequires: python3-devel
|
|
BuildRequires: gcc-plugin-devel
|
|
BuildRequires: kernel-rpm-macros >= 185-9
|
|
# glibc-static is required for a consistent build environment (specifically
|
|
# CONFIG_CC_CAN_LINK_STATIC=y).
|
|
BuildRequires: glibc-static
|
|
%if %{with_headers}
|
|
BuildRequires: rsync
|
|
%endif
|
|
%if %{with_doc}
|
|
BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme, python3-pyyaml
|
|
%endif
|
|
%if %{with_sparse}
|
|
BuildRequires: sparse
|
|
%endif
|
|
%if %{with_perf}
|
|
BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel
|
|
BuildRequires: audit-libs-devel python3-setuptools
|
|
BuildRequires: java-devel
|
|
BuildRequires: libbabeltrace-devel
|
|
BuildRequires: libtraceevent-devel
|
|
BuildRequires: elfutils-debuginfod-client-devel
|
|
%ifnarch %{arm} s390x
|
|
BuildRequires: numactl-devel
|
|
%endif
|
|
%ifarch aarch64
|
|
BuildRequires: opencsd-devel >= 1.2.1
|
|
%endif
|
|
%endif
|
|
%if %{with_tools}
|
|
BuildRequires: gettext ncurses-devel
|
|
BuildRequires: libcap-devel libcap-ng-devel
|
|
# The following are rtla requirements
|
|
BuildRequires: python3-docutils
|
|
BuildRequires: libtraceevent-devel
|
|
BuildRequires: libtracefs-devel
|
|
BuildRequires: libbpf-devel
|
|
BuildRequires: bpftool
|
|
BuildRequires: clang
|
|
|
|
%ifnarch s390x
|
|
BuildRequires: pciutils-devel
|
|
%endif
|
|
%ifarch i686 x86_64
|
|
BuildRequires: libnl3-devel
|
|
%endif
|
|
%endif
|
|
%if %{with_tools} || %{signmodules} || %{signkernel}
|
|
BuildRequires: openssl-devel
|
|
%endif
|
|
%if %{with_selftests}
|
|
BuildRequires: clang llvm fuse-devel zlib-devel binutils-devel python3-docutils
|
|
%ifarch x86_64
|
|
BuildRequires: lld
|
|
%endif
|
|
%ifnarch %{arm}
|
|
BuildRequires: numactl-devel
|
|
%endif
|
|
BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel
|
|
%endif
|
|
BuildConflicts: rhbuildsys(DiskFree) < 500Mb
|
|
%if %{with_debuginfo}
|
|
BuildRequires: rpm-build, elfutils
|
|
BuildConflicts: rpm < 4.13.0.1-19
|
|
BuildConflicts: dwarves < 1.13
|
|
# Most of these should be enabled after more investigation
|
|
%undefine _include_minidebuginfo
|
|
%undefine _find_debuginfo_dwz_opts
|
|
%undefine _unique_build_ids
|
|
%undefine _unique_debug_names
|
|
%undefine _unique_debug_srcs
|
|
%undefine _debugsource_packages
|
|
%undefine _debuginfo_subpackages
|
|
# Remove -q option below to provide 'extracting debug info' messages
|
|
%global _find_debuginfo_opts -r -q
|
|
%global _missing_build_ids_terminate_build 1
|
|
%global _no_recompute_build_ids 1
|
|
%endif
|
|
%if %{with_kabidwchk} || %{with_kabidw_base}
|
|
BuildRequires: kabi-dw
|
|
%endif
|
|
|
|
%if %{signkernel}%{signmodules}
|
|
BuildRequires: openssl
|
|
%if %{signkernel}
|
|
# ELN uses Fedora signing process, so exclude
|
|
%if 0%{?rhel}%{?centos} && !0%{?eln}
|
|
BuildRequires: system-sb-certs
|
|
%endif
|
|
%ifarch x86_64 aarch64
|
|
BuildRequires: nss-tools
|
|
BuildRequires: pesign >= 0.10-4
|
|
%endif
|
|
%endif
|
|
%endif
|
|
|
|
%if %{with_cross}
|
|
BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu
|
|
%define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu-
|
|
%define __strip %{_build_arch}-linux-gnu-strip
|
|
%endif
|
|
|
|
# These below are required to build man pages
|
|
%if %{with_perf}
|
|
BuildRequires: xmlto
|
|
%endif
|
|
%if %{with_perf} || %{with_tools}
|
|
BuildRequires: asciidoc
|
|
%endif
|
|
|
|
%if %{with toolchain_clang}
|
|
BuildRequires: clang
|
|
%endif
|
|
|
|
%if %{with clang_lto}
|
|
BuildRequires: llvm
|
|
BuildRequires: lld
|
|
%endif
|
|
|
|
%if %{efiuki}
|
|
BuildRequires: dracut >= 057-79.git20241127.el9
|
|
# For dracut UEFI uki binaries
|
|
BuildRequires: binutils
|
|
# For the initrd
|
|
BuildRequires: lvm2
|
|
# For systemd-stub
|
|
BuildRequires: systemd-boot-unsigned
|
|
# For systemd-pcrphase
|
|
BuildRequires: systemd-udev >= 252-1
|
|
# For systemd-repart
|
|
BuildRequires: xfsprogs e2fsprogs dosfstools
|
|
# For UKI kernel cmdline addons
|
|
BuildRequires: systemd-ukify
|
|
# For TPM operations in UKI initramfs
|
|
BuildRequires: tpm2-tools
|
|
# For UKI sb cert
|
|
%if 0%{?centos}
|
|
BuildRequires: centos-sb-certs >= 9.0-23
|
|
%else
|
|
BuildRequires: redhat-sb-certs >= 9.4-0.1
|
|
%endif
|
|
%endif
|
|
|
|
# Because this is the kernel, it's hard to get a single upstream URL
|
|
# to represent the base without needing to do a bunch of patching. This
|
|
# tarball is generated from a src-git tree. If you want to see the
|
|
# exact git commit you can run
|
|
#
|
|
# xzcat -qq ${TARBALL} | git get-tar-commit-id
|
|
Source0: linux-%{tarfile_release}.tar.xz
|
|
|
|
Source1: Makefile.rhelver
|
|
Source2: kernel.changelog
|
|
|
|
%if %{signkernel}
|
|
|
|
# Name of the packaged file containing signing key
|
|
%ifarch ppc64le
|
|
%define signing_key_filename kernel-signing-ppc.cer
|
|
%endif
|
|
%ifarch s390x
|
|
%define signing_key_filename kernel-signing-s390.cer
|
|
%endif
|
|
|
|
%define secureboot_ca_0 %{_datadir}/pki/sb-certs/secureboot-ca-%{_arch}.cer
|
|
%define secureboot_key_0 %{_datadir}/pki/sb-certs/secureboot-kernel-%{_arch}.cer
|
|
|
|
%if 0%{?centos}
|
|
%define pesign_name_0 centossecureboot201
|
|
%else
|
|
%ifarch x86_64 aarch64
|
|
%define pesign_name_0 redhatsecureboot801
|
|
%endif
|
|
%ifarch s390x
|
|
%define pesign_name_0 redhatsecureboot302
|
|
%endif
|
|
%ifarch ppc64le
|
|
%define pesign_name_0 redhatsecureboot701
|
|
%endif
|
|
%endif
|
|
|
|
# signkernel
|
|
%endif
|
|
|
|
Source20: mod-denylist.sh
|
|
Source21: mod-sign.sh
|
|
Source22: parallel_xz.sh
|
|
|
|
%define modsign_cmd %{SOURCE21}
|
|
|
|
%if 0%{?include_rhel}
|
|
Source23: x509.genkey.rhel
|
|
|
|
Source24: kernel-aarch64-rhel.config
|
|
Source25: kernel-aarch64-debug-rhel.config
|
|
Source26: mod-extra.list.rhel
|
|
|
|
Source27: kernel-ppc64le-rhel.config
|
|
Source28: kernel-ppc64le-debug-rhel.config
|
|
Source29: kernel-s390x-rhel.config
|
|
Source30: kernel-s390x-debug-rhel.config
|
|
Source31: kernel-s390x-zfcpdump-rhel.config
|
|
Source32: kernel-x86_64-rhel.config
|
|
Source33: kernel-x86_64-debug-rhel.config
|
|
|
|
Source34: filter-x86_64.sh.rhel
|
|
Source35: filter-armv7hl.sh.rhel
|
|
Source37: filter-aarch64.sh.rhel
|
|
Source38: filter-ppc64le.sh.rhel
|
|
Source39: filter-s390x.sh.rhel
|
|
Source40: filter-modules.sh.rhel
|
|
|
|
Source41: x509.genkey.centos
|
|
# ARM64 64K page-size kernel config
|
|
Source42: kernel-aarch64-64k-rhel.config
|
|
Source43: kernel-aarch64-64k-debug-rhel.config
|
|
|
|
Source44: kernel-x86_64-rt-rhel.config
|
|
Source45: kernel-x86_64-rt-debug-rhel.config
|
|
Source46: kernel-aarch64-rt-rhel.config
|
|
Source47: kernel-aarch64-rt-debug-rhel.config
|
|
Source48: kernel-aarch64-rt-64k-rhel.config
|
|
Source49: kernel-aarch64-rt-64k-debug-rhel.config
|
|
%endif
|
|
|
|
%if 0%{?include_fedora}
|
|
Source50: x509.genkey.fedora
|
|
Source51: mod-extra.list.fedora
|
|
|
|
Source52: kernel-aarch64-fedora.config
|
|
Source53: kernel-aarch64-debug-fedora.config
|
|
Source54: kernel-armv7hl-fedora.config
|
|
Source55: kernel-armv7hl-debug-fedora.config
|
|
Source56: kernel-armv7hl-lpae-fedora.config
|
|
Source57: kernel-armv7hl-lpae-debug-fedora.config
|
|
Source60: kernel-ppc64le-fedora.config
|
|
Source61: kernel-ppc64le-debug-fedora.config
|
|
Source62: kernel-s390x-fedora.config
|
|
Source63: kernel-s390x-debug-fedora.config
|
|
Source64: kernel-x86_64-fedora.config
|
|
Source65: kernel-x86_64-debug-fedora.config
|
|
|
|
Source67: filter-x86_64.sh.fedora
|
|
Source68: filter-armv7hl.sh.fedora
|
|
Source70: filter-aarch64.sh.fedora
|
|
Source71: filter-ppc64le.sh.fedora
|
|
Source72: filter-s390x.sh.fedora
|
|
Source73: filter-modules.sh.fedora
|
|
%endif
|
|
|
|
Source75: partial-kgcov-snip.config
|
|
Source80: generate_all_configs.sh
|
|
Source81: process_configs.sh
|
|
|
|
Source82: update_scripts.sh
|
|
Source83: kernel.sbat.template
|
|
|
|
Source84: mod-internal.list
|
|
Source85: mod-partner.list
|
|
|
|
Source100: rheldup3.x509
|
|
Source101: rhelkpatch1.x509
|
|
Source102: rhelimaca1.x509
|
|
Source103: rhelima.x509
|
|
Source104: rhelima_centos.x509
|
|
Source105: nvidiagpuoot001.x509
|
|
Source106: nvidiajetsonsoc.x509
|
|
Source107: nvidiabfdpu.x509
|
|
|
|
%if 0%{?centos}
|
|
%define ima_signing_cert %{SOURCE104}
|
|
%else
|
|
%define ima_signing_cert %{SOURCE103}
|
|
%endif
|
|
|
|
%define ima_cert_name ima.cer
|
|
|
|
Source150: dracut-virt.conf
|
|
|
|
Source151: uki_create_addons.py
|
|
Source152: uki_addons.json
|
|
|
|
# Temporary use redhatsecureboot504 for x86 UKI, see RHEL-122230
|
|
Source153: redhatsecureboot504.cer
|
|
|
|
Source200: check-kabi
|
|
|
|
Source201: Module.kabi_aarch64
|
|
Source202: Module.kabi_ppc64le
|
|
Source203: Module.kabi_s390x
|
|
Source204: Module.kabi_x86_64
|
|
|
|
Source210: Module.kabi_dup_aarch64
|
|
Source211: Module.kabi_dup_ppc64le
|
|
Source212: Module.kabi_dup_s390x
|
|
Source213: Module.kabi_dup_x86_64
|
|
|
|
Source300: kernel-abi-stablelists-%{kabiversion}.tar.bz2
|
|
Source301: kernel-kabi-dw-%{kabiversion}.tar.bz2
|
|
|
|
# Sources for kernel-tools
|
|
Source2000: cpupower.service
|
|
Source2001: cpupower.config
|
|
Source2002: kvm_stat.logrotate
|
|
|
|
# Some people enjoy building customized kernels from the dist-git in Fedora and
|
|
# use this to override configuration options. One day they may all use the
|
|
# source tree, but in the mean time we carry this to support the legacy workflow
|
|
Source3000: merge.pl
|
|
Source3001: kernel-local
|
|
%if %{patchlist_changelog}
|
|
Source3002: Patchlist.changelog
|
|
%endif
|
|
|
|
Source4000: README.rst
|
|
Source4001: rpminspect.yaml
|
|
Source4002: gating.yaml
|
|
|
|
## Patches needed for building this package
|
|
|
|
%if !%{nopatches}
|
|
|
|
Patch1: patch-%{patchversion}-redhat.patch
|
|
%endif
|
|
|
|
# empty final patch to facilitate testing of kernel patches
|
|
Patch999999: linux-kernel-test.patch
|
|
|
|
# END OF PATCH DEFINITIONS
|
|
|
|
%description
|
|
The kernel meta package
|
|
|
|
#
|
|
# This macro does requires, provides, conflicts, obsoletes for a kernel package.
|
|
# %%kernel_reqprovconf [-o] <subpackage>
|
|
# It uses any kernel_<subpackage>_conflicts and kernel_<subpackage>_obsoletes
|
|
# macros defined above.
|
|
#
|
|
%define kernel_reqprovconf(o) \
|
|
%if %{-o:0}%{!-o:1}\
|
|
Provides: kernel = %{specversion}-%{pkg_release}\
|
|
%endif\
|
|
Provides: kernel-%{_target_cpu} = %{specversion}-%{pkg_release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires(pre): %{kernel_prereq}\
|
|
Requires(pre): %{initrd_prereq}\
|
|
Requires(pre): ((linux-firmware >= 20150904-56.git6ebf5d57) if linux-firmware)\
|
|
Recommends: linux-firmware\
|
|
Requires(preun): systemd >= 200\
|
|
Conflicts: xfsprogs < 4.3.0-1\
|
|
Conflicts: xorg-x11-drv-vmmouse < 13.0.99\
|
|
%ifarch x86_64 aarch64\
|
|
Conflicts: shim < 15.8-1\
|
|
%endif\
|
|
%{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\
|
|
%{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\
|
|
%{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\
|
|
# We can't let RPM do the dependencies automatic because it'll then pick up\
|
|
# a correct but undesirable perl dependency from the module headers which\
|
|
# isn't required for the kernel proper to function\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%{nil}
|
|
|
|
|
|
%package doc
|
|
Summary: Various documentation bits found in the kernel source
|
|
Group: Documentation
|
|
%description doc
|
|
This package contains documentation files from the kernel
|
|
source. Various bits of information about the Linux kernel and the
|
|
device drivers shipped with it are documented in these files.
|
|
|
|
You'll want to install this package if you need a reference to the
|
|
options that can be passed to Linux kernel modules at load time.
|
|
|
|
|
|
%package headers
|
|
Summary: Header files for the Linux kernel for use by glibc
|
|
Obsoletes: glibc-kernheaders < 3.0-46
|
|
Provides: glibc-kernheaders = 3.0-46
|
|
%description headers
|
|
Kernel-headers includes the C header files that specify the interface
|
|
between the Linux kernel and userspace libraries and programs. The
|
|
header files define structures and constants that are needed for
|
|
building most standard programs and are also needed for rebuilding the
|
|
glibc package.
|
|
|
|
%package cross-headers
|
|
Summary: Header files for the Linux kernel for use by cross-glibc
|
|
%description cross-headers
|
|
Kernel-cross-headers includes the C header files that specify the interface
|
|
between the Linux kernel and userspace libraries and programs. The
|
|
header files define structures and constants that are needed for
|
|
building most standard programs and are also needed for rebuilding the
|
|
cross-glibc package.
|
|
|
|
|
|
%package debuginfo-common-%{_target_cpu}
|
|
Summary: Kernel source files used by %{name}-debuginfo packages
|
|
Provides: installonlypkg(kernel)
|
|
%description debuginfo-common-%{_target_cpu}
|
|
This package is required by %{name}-debuginfo subpackages.
|
|
It provides the kernel source files common to all builds.
|
|
|
|
%if %{with_perf}
|
|
%package -n perf
|
|
Summary: Performance monitoring for the Linux kernel
|
|
Requires: bzip2
|
|
%description -n perf
|
|
This package contains the perf tool, which enables performance monitoring
|
|
of the Linux kernel.
|
|
|
|
%package -n perf-debuginfo
|
|
Summary: Debug information for package perf
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n perf-debuginfo
|
|
This package provides debug information for the perf package.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list}
|
|
|
|
%package -n python3-perf
|
|
Summary: Python bindings for apps which will manipulate perf events
|
|
%description -n python3-perf
|
|
The python3-perf package contains a module that permits applications
|
|
written in the Python programming language to use the interface
|
|
to manipulate perf events.
|
|
|
|
%package -n python3-perf-debuginfo
|
|
Summary: Debug information for package perf python bindings
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n python3-perf-debuginfo
|
|
This package provides debug information for the perf python bindings.
|
|
|
|
# the python_sitearch macro should already be defined from above
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list}
|
|
|
|
%package -n libperf
|
|
Summary: The perf library from kernel source
|
|
%description -n libperf
|
|
This package contains the kernel source perf library.
|
|
|
|
%package -n libperf-devel
|
|
Summary: Developement files for the perf library from kernel source
|
|
Requires: libperf = %{version}-%{release}
|
|
%description -n libperf-devel
|
|
This package includes libraries and header files needed for development
|
|
of applications which use perf library from kernel source.
|
|
|
|
%package -n libperf-debuginfo
|
|
Summary: Debug information for package libperf
|
|
Group: Development/Debug
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n libperf-debuginfo
|
|
This package provides debug information for the libperf package.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libdir}/libperf.so.*(\.debug)?|XXX' -o libperf-debuginfo.list}
|
|
|
|
# with_perf
|
|
%endif
|
|
|
|
%if %{with_tools}
|
|
%package -n kernel-tools
|
|
Summary: Assortment of tools for the Linux kernel
|
|
%ifarch %{cpupowerarchs}
|
|
Provides: cpupowerutils = 1:009-0.6.p1
|
|
Obsoletes: cpupowerutils < 1:009-0.6.p1
|
|
Provides: cpufreq-utils = 1:009-0.6.p1
|
|
Provides: cpufrequtils = 1:009-0.6.p1
|
|
Obsoletes: cpufreq-utils < 1:009-0.6.p1
|
|
Obsoletes: cpufrequtils < 1:009-0.6.p1
|
|
Obsoletes: cpuspeed < 1:1.5-16
|
|
Requires: kernel-tools-libs = %{version}-%{release}
|
|
%endif
|
|
%define __requires_exclude ^%{_bindir}/python
|
|
%description -n kernel-tools
|
|
This package contains the tools/ directory from the kernel source
|
|
and the supporting documentation.
|
|
|
|
%package -n kernel-tools-libs
|
|
Summary: Libraries for the kernels-tools
|
|
%description -n kernel-tools-libs
|
|
This package contains the libraries built from the tools/ directory
|
|
from the kernel source.
|
|
|
|
%package -n kernel-tools-libs-devel
|
|
Summary: Assortment of tools for the Linux kernel
|
|
Requires: kernel-tools = %{version}-%{release}
|
|
%ifarch %{cpupowerarchs}
|
|
Provides: cpupowerutils-devel = 1:009-0.6.p1
|
|
Obsoletes: cpupowerutils-devel < 1:009-0.6.p1
|
|
%endif
|
|
Requires: kernel-tools-libs = %{version}-%{release}
|
|
Provides: kernel-tools-devel
|
|
%description -n kernel-tools-libs-devel
|
|
This package contains the development files for the tools/ directory from
|
|
the kernel source.
|
|
|
|
%package -n kernel-tools-debuginfo
|
|
Summary: Debug information for package kernel-tools
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n kernel-tools-debuginfo
|
|
This package provides debug information for package kernel-tools.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/bootconfig(\.debug)?|.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|.*%%{_sbindir}/intel_sdsi(\.debug)?|XXX' -o kernel-tools-debuginfo.list}
|
|
|
|
%package -n rtla
|
|
Summary: Real-Time Linux Analysis tools
|
|
Requires: libtraceevent
|
|
Requires: libtracefs
|
|
Requires: libbpf
|
|
%ifarch %{cpupowerarchs}
|
|
Requires: kernel-tools-libs = %{version}-%{release}
|
|
%endif
|
|
%description -n rtla
|
|
The rtla meta-tool includes a set of commands that aims to analyze
|
|
the real-time properties of Linux. Instead of testing Linux as a black box,
|
|
rtla leverages kernel tracing capabilities to provide precise information
|
|
about the properties and root causes of unexpected results.
|
|
|
|
%if %{with_debuginfo}
|
|
%package -n rtla-debuginfo
|
|
Summary: Debug information for package rtla
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n rtla-debuginfo
|
|
This package provides debug information for the rtla package.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/rtla(\.debug)?|.*%%{_bindir}/hwnoise(\.debug)?|.*%%{_bindir}/osnoise(\.debug)?|.*%%{_bindir}/timerlat(\.debug)?|XXX' -o rtla-debuginfo.list}
|
|
%endif
|
|
|
|
%package -n rv
|
|
Summary: RV: Runtime Verification
|
|
%description -n rv
|
|
Runtime Verification (RV) is a lightweight (yet rigorous) method that
|
|
complements classical exhaustive verification techniques (such as model
|
|
checking and theorem proving) with a more practical approach for
|
|
complex systems.
|
|
The rv tool is the interface for a collection of monitors that aim
|
|
to analyze the logical and timing behavior of Linux.
|
|
|
|
%if %{with_debuginfo}
|
|
%package -n rv-debuginfo
|
|
Summary: Debug information for package rv
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}
|
|
AutoReqProv: no
|
|
%description -n rv-debuginfo
|
|
This package provides debug information for the rv package.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/rv(\.debug)?|XXX' -o rv-debuginfo.list}
|
|
%endif
|
|
|
|
# with_tools
|
|
%endif
|
|
|
|
%if %{with_selftests}
|
|
|
|
%package selftests-internal
|
|
Summary: Kernel samples and selftests
|
|
Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3, fuse-libs, keyutils
|
|
%description selftests-internal
|
|
Kernel sample programs and selftests.
|
|
|
|
# Note that this pattern only works right to match the .build-id
|
|
# symlinks because of the trailing nonmatching alternation and
|
|
# the leading .*, because of find-debuginfo.sh's buggy handling
|
|
# of matching the pattern against the symlinks file.
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list}
|
|
|
|
%define __requires_exclude ^liburandom_read.so.*$
|
|
|
|
# with_selftests
|
|
%endif
|
|
|
|
%define kernel_gcov_package() \
|
|
%package %{?1:%{1}-}gcov\
|
|
Summary: gcov graph and source files for coverage data collection.\
|
|
%description %{?1:%{1}-}gcov\
|
|
%{?1:%{1}-}gcov includes the gcov graph and source files for gcov coverage collection.\
|
|
%{nil}
|
|
|
|
%package -n kernel-abi-stablelists
|
|
Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists
|
|
AutoReqProv: no
|
|
%description -n kernel-abi-stablelists
|
|
The kABI package contains information pertaining to the Red Hat Enterprise
|
|
Linux kernel ABI, including lists of kernel symbols that are needed by
|
|
external Linux kernel modules, and a yum plugin to aid enforcement.
|
|
|
|
%if %{with_kabidw_base}
|
|
%package kernel-kabidw-base-internal
|
|
Summary: The baseline dataset for kABI verification using DWARF data
|
|
Group: System Environment/Kernel
|
|
AutoReqProv: no
|
|
%description kernel-kabidw-base-internal
|
|
The package contains data describing the current ABI of the Red Hat Enterprise
|
|
Linux kernel, suitable for the kabi-dw tool.
|
|
%endif
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-debuginfo package.
|
|
# %%kernel_debuginfo_package <subpackage>
|
|
#
|
|
# Explanation of the find_debuginfo_opts: We build multiple kernels (debug
|
|
# pae etc.) so the regex filters those kernels appropriately. We also
|
|
# have to package several binaries as part of kernel-devel but getting
|
|
# unique build-ids is tricky for these userspace binaries. We don't really
|
|
# care about debugging those so we just filter those out and remove it.
|
|
%define kernel_debuginfo_package() \
|
|
%package %{?1:%{1}-}debuginfo\
|
|
Summary: Debug information for package %{name}%{?1:-%{1}}\
|
|
Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: installonlypkg(kernel)\
|
|
AutoReqProv: no\
|
|
%description %{?1:%{1}-}debuginfo\
|
|
This package provides debug information for package %{name}%{?1:-%{1}}.\
|
|
This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\
|
|
%{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} --keep-section '.BTF' -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-devel package.
|
|
# %%kernel_devel_package [-m] <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_devel_package(m) \
|
|
%package %{?1:%{1}-}devel\
|
|
Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\
|
|
Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel-devel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel)\
|
|
AutoReqProv: no\
|
|
Requires(pre): findutils\
|
|
Requires: findutils\
|
|
Requires: perl-interpreter\
|
|
Requires: openssl-devel\
|
|
Requires: elfutils-libelf-devel\
|
|
Requires: bison\
|
|
Requires: flex\
|
|
Requires: make\
|
|
Requires: gcc\
|
|
%if %{-m:1}%{!-m:0}\
|
|
Requires: kernel-devel-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
%endif\
|
|
%description %{?1:%{1}-}devel\
|
|
This package provides kernel headers and makefiles sufficient to build modules\
|
|
against the %{?2:%{2} }kernel package.\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates an empty kernel-<subpackage>-devel-matched package that
|
|
# requires both the core and devel packages locked on the same version.
|
|
# %%kernel_devel_matched_package [-m] <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_devel_matched_package(m) \
|
|
%package %{?1:%{1}-}devel-matched\
|
|
Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\
|
|
Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\
|
|
Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\
|
|
%description %{?1:%{1}-}devel-matched\
|
|
This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-modules-internal package.
|
|
# %%kernel_modules_internal_package <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_modules_internal_package() \
|
|
%package %{?1:%{1}-}modules-internal\
|
|
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
|
|
Group: System Environment/Kernel\
|
|
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel-module)\
|
|
Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%description %{?1:%{1}-}modules-internal\
|
|
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-modules-extra package.
|
|
# %%kernel_modules_extra_package [-m] <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_modules_extra_package(m) \
|
|
%package %{?1:%{1}-}modules-extra\
|
|
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
|
|
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel-module)\
|
|
Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
%if %{-m:1}%{!-m:0}\
|
|
Requires: kernel-modules-extra-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
%endif\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%description %{?1:%{1}-}modules-extra\
|
|
This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-modules package.
|
|
# %%kernel_modules_package [-m] <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_modules_package(m) \
|
|
%package %{?1:%{1}-}modules\
|
|
Summary: kernel modules to match the %{?2:%{2}-}core kernel\
|
|
Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel-modules = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel-module)\
|
|
Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
%if %{-m:1}%{!-m:0}\
|
|
Requires: kernel-modules-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
%endif\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%description %{?1:%{1}-}modules\
|
|
This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-modules-core package.
|
|
# %%kernel_modules_core_package [-m] <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_modules_core_package(m) \
|
|
%package %{?1:%{1}-}modules-core\
|
|
Summary: Core kernel modules to match the %{?2:%{2}-}core kernel\
|
|
Provides: kernel%{?1:-%{1}}-modules-core-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel-modules-core-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel-modules-core = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel-module)\
|
|
Provides: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
%if %{-m:1}%{!-m:0}\
|
|
Requires: kernel-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
%endif\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%description %{?1:%{1}-}modules-core\
|
|
This package provides essential kernel modules for the %{?2:%{2}-}core kernel package.\
|
|
%{nil}
|
|
|
|
#
|
|
# this macro creates a kernel-<subpackage> meta package.
|
|
# %%kernel_meta_package <subpackage>
|
|
#
|
|
%define kernel_meta_package() \
|
|
%package %{1}\
|
|
summary: kernel meta-package for the %{1} kernel\
|
|
Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
|
|
Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{uname_suffix %{1}}\
|
|
Requires: kernel-%{1}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{1}}\
|
|
%if "%{1}" == "rt" || "%{1}" == "rt-debug" || "%{1}" == "rt-64k" || "%{1}" == "rt-64k-debug"\
|
|
Requires: realtime-setup\
|
|
%endif\
|
|
Provides: installonlypkg(kernel)\
|
|
%description %{1}\
|
|
The meta-package for the %{1} kernel\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage> and its -devel and -debuginfo too.
|
|
# %%define variant_summary The Linux kernel compiled for <configuration>
|
|
# %%kernel_variant_package [-n <pretty-name>] [-m] [-o] <subpackage>
|
|
#
|
|
%define kernel_variant_package(n:mo) \
|
|
%package %{?1:%{1}-}core\
|
|
Summary: %{variant_summary}\
|
|
Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel)\
|
|
%if %{-m:1}%{!-m:0}\
|
|
Requires: kernel-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
Requires: kernel-%{?1:%{1}-}-modules-core-uname-r = %{KVERREL}%{uname_variant %{?1:%{1}}}\
|
|
%endif\
|
|
%{expand:%%kernel_reqprovconf %{?1:%{1}} %{-o:%{-o}}}\
|
|
%if %{?1:1} %{!?1:0} \
|
|
%{expand:%%kernel_meta_package %{?1:%{1}}}\
|
|
%endif\
|
|
%{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
|
|
%{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
|
|
%{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
|
|
%{expand:%%kernel_modules_core_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
|
|
%{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\
|
|
%if %{-m:0}%{!-m:1}\
|
|
%{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
|
|
%if 0%{!?fedora:1}\
|
|
%{expand:%%kernel_modules_partner_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\
|
|
%endif\
|
|
%{expand:%%kernel_debuginfo_package %{?1:%{1}}}\
|
|
%endif\
|
|
%if %{efiuki}\
|
|
%if "%{1}" != "rt" && "%{1}" != "rt-debug" && "%{1}" != "rt-64k" && "%{1}" != "rt-64k-debug"\
|
|
%package %{?1:%{1}-}uki-virt\
|
|
Summary: %{variant_summary} unified kernel image for virtual machines\
|
|
Provides: installonlypkg(kernel)\
|
|
Provides: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-core-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires(pre): %{kernel_prereq}\
|
|
Requires(pre): systemd >= 252-20\
|
|
%package %{?1:%{1}-}uki-virt-addons\
|
|
Summary: %{variant_summary} unified kernel image addons for virtual machines\
|
|
Provides: installonlypkg(kernel)\
|
|
Requires: kernel%{?1:-%{1}}-uki-virt = %{version}-%{release}\
|
|
Requires(pre): systemd >= 252-20\
|
|
%endif\
|
|
%endif\
|
|
%if %{with_gcov}\
|
|
%{expand:%%kernel_gcov_package %{?1:%{1}}}\
|
|
%endif\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro creates a kernel-<subpackage>-modules-partner package.
|
|
# %%kernel_modules_partner_package <subpackage> <pretty-name>
|
|
#
|
|
%define kernel_modules_partner_package() \
|
|
%package %{?1:%{1}-}modules-partner\
|
|
Summary: Extra kernel modules to match the %{?2:%{2} }kernel\
|
|
Group: System Environment/Kernel\
|
|
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}\
|
|
Provides: kernel%{?1:-%{1}}-modules-partner-%{_target_cpu} = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: kernel%{?1:-%{1}}-modules-partner = %{version}-%{release}%{uname_suffix %{?1:%{1}}}\
|
|
Provides: installonlypkg(kernel-module)\
|
|
Provides: kernel%{?1:-%{1}}-modules-partner-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{uname_suffix %{?1:%{1}}}\
|
|
AutoReq: no\
|
|
AutoProv: yes\
|
|
%description %{?1:%{1}-}modules-partner\
|
|
This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat partners usage.\
|
|
%{nil}
|
|
|
|
# Now, each variant package.
|
|
|
|
%if %{with_pae}
|
|
%define variant_summary The Linux kernel compiled for Cortex-A15
|
|
%kernel_variant_package lpae
|
|
%description lpae-core
|
|
This package includes a version of the Linux kernel with support for
|
|
Cortex-A15 devices with LPAE and HW virtualisation support
|
|
%endif
|
|
|
|
%if %{with_zfcpdump}
|
|
%define variant_summary The Linux kernel compiled for zfcpdump usage
|
|
%kernel_variant_package -o zfcpdump
|
|
%description zfcpdump-core
|
|
The kernel package contains the Linux kernel (vmlinuz) for use by the
|
|
zfcpdump infrastructure.
|
|
# with_zfcpdump
|
|
%endif
|
|
|
|
%if %{with_arm64_64k}
|
|
%define variant_summary The Linux kernel compiled for 64k pagesize usage
|
|
%kernel_variant_package 64k
|
|
%description 64k-core
|
|
The kernel package contains a variant of the ARM64 Linux kernel using
|
|
a 64K page size.
|
|
%endif
|
|
|
|
%if %{with_arm64_64k} && %{with_debug}
|
|
%define variant_summary The Linux kernel compiled with extra debugging enabled
|
|
%if !%{debugbuildsenabled}
|
|
%kernel_variant_package -m 64k-debug
|
|
%else
|
|
%kernel_variant_package 64k-debug
|
|
%endif
|
|
%description 64k-debug-core
|
|
The debug kernel package contains a variant of the ARM64 Linux kernel using
|
|
a 64K page size.
|
|
This variant of the kernel has numerous debugging options enabled.
|
|
It should only be installed when trying to gather additional information
|
|
on kernel bugs, as some of these options impact performance noticably.
|
|
%endif
|
|
|
|
%if %{with_realtime}
|
|
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
|
|
%kernel_variant_package rt
|
|
%description rt-core
|
|
This package includes a version of the Linux kernel compiled with PREEMPT_RT
|
|
(real-time preemption support).
|
|
%endif
|
|
|
|
%if %{with_debug} && %{with_realtime}
|
|
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled
|
|
%kernel_variant_package rt-debug
|
|
%description rt-debug-core
|
|
This package includes a version of the Linux kernel compiled with PREEMPT_RT
|
|
(real-time preemption support) and has numerous debugging options enabled.
|
|
It should only be installed when trying to gather additional information
|
|
on kernel bugs, as some of these options impact performance noticably.
|
|
%endif
|
|
|
|
%if %{with_realtime_arm64_64k}
|
|
%define variant_summary The Linux kernel compiled with PREEMPT_RT enabled and for 64k pagesize usage
|
|
%kernel_variant_package rt-64k
|
|
%description rt-64k-core
|
|
The kernel package contains a variant of the ARM64 Linux kernel with PREEMPT_RT
|
|
enabled and using a 64K page size.
|
|
%endif
|
|
|
|
%if %{with_realtime_arm64_64k} && %{with_debug}
|
|
%define variant_summary The Linux PREEMPT_RT kernel compiled with extra debugging enabled
|
|
%if !%{debugbuildsenabled}
|
|
%kernel_variant_package -m rt-64k-debug
|
|
%else
|
|
%kernel_variant_package rt-64k-debug
|
|
%endif
|
|
%description rt-64k-debug-core
|
|
The debug kernel package contains a variant of the ARM64 Linux PREEMPT_RT
|
|
kernel using a 64K page size.
|
|
This variant of the kernel has numerous debugging options enabled.
|
|
It should only be installed when trying to gather additional information
|
|
on kernel bugs, as some of these options impact performance noticably.
|
|
%endif
|
|
|
|
%if !%{debugbuildsenabled}
|
|
%kernel_variant_package -m debug
|
|
%else
|
|
%kernel_variant_package debug
|
|
%endif
|
|
%description debug-core
|
|
The kernel package contains the Linux kernel (vmlinuz), the core of any
|
|
Linux operating system. The kernel handles the basic functions
|
|
of the operating system: memory allocation, process allocation, device
|
|
input and output, etc.
|
|
|
|
This variant of the kernel has numerous debugging options enabled.
|
|
It should only be installed when trying to gather additional information
|
|
on kernel bugs, as some of these options impact performance noticably.
|
|
|
|
# And finally the main -core package
|
|
|
|
%define variant_summary The Linux kernel
|
|
%kernel_variant_package
|
|
%description core
|
|
The kernel package contains the Linux kernel (vmlinuz), the core of any
|
|
Linux operating system. The kernel handles the basic functions
|
|
of the operating system: memory allocation, process allocation, device
|
|
input and output, etc.
|
|
|
|
%if %{efiuki}
|
|
%description debug-uki-virt
|
|
Prebuilt debug unified kernel image for virtual machines.
|
|
|
|
%description debug-uki-virt-addons
|
|
Prebuilt debug unified kernel image addons for virtual machines.
|
|
|
|
%description uki-virt
|
|
Prebuilt default unified kernel image for virtual machines.
|
|
|
|
%description uki-virt-addons
|
|
Prebuilt default unified kernel image addons for virtual machines.
|
|
%endif
|
|
|
|
%prep
|
|
# do a few sanity-checks for --with *only builds
|
|
%if %{with_baseonly}
|
|
%if !%{with_up}
|
|
echo "Cannot build --with baseonly, up build is disabled"
|
|
exit 1
|
|
%endif
|
|
%endif
|
|
|
|
# more sanity checking; do it quietly
|
|
if [ "%{patches}" != "%%{patches}" ] ; then
|
|
for patch in %{patches} ; do
|
|
if [ ! -f $patch ] ; then
|
|
echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing"
|
|
exit 1
|
|
fi
|
|
done
|
|
fi 2>/dev/null
|
|
|
|
patch_command='git apply'
|
|
ApplyPatch()
|
|
{
|
|
local patch=$1
|
|
shift
|
|
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
|
|
exit 1
|
|
fi
|
|
if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then
|
|
if [ "${patch:0:8}" != "patch-%{kversion}." ] ; then
|
|
echo "ERROR: Patch $patch not listed as a source patch in specfile"
|
|
exit 1
|
|
fi
|
|
fi 2>/dev/null
|
|
case "$patch" in
|
|
*.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
|
|
*.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
|
|
*.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;;
|
|
*) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;;
|
|
esac
|
|
}
|
|
|
|
# don't apply patch if it's empty
|
|
ApplyOptionalPatch()
|
|
{
|
|
local patch=$1
|
|
shift
|
|
if [ ! -f $RPM_SOURCE_DIR/$patch ]; then
|
|
exit 1
|
|
fi
|
|
local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}')
|
|
if [ "$C" -gt 9 ]; then
|
|
ApplyPatch $patch ${1+"$@"}
|
|
fi
|
|
}
|
|
|
|
%setup -q -n kernel-%{tarfile_release} -c
|
|
mv linux-%{tarfile_release} linux-%{KVERREL}
|
|
|
|
cd linux-%{KVERREL}
|
|
cp -a %{SOURCE1} .
|
|
|
|
%if !%{nopatches}
|
|
|
|
ApplyOptionalPatch patch-%{patchversion}-redhat.patch
|
|
%endif
|
|
|
|
ApplyOptionalPatch linux-kernel-test.patch
|
|
|
|
# END OF PATCH APPLICATIONS
|
|
|
|
# Any further pre-build tree manipulations happen here.
|
|
|
|
chmod +x scripts/checkpatch.pl
|
|
mv COPYING COPYING-%{version}-%{release}
|
|
|
|
# This Prevents scripts/setlocalversion from mucking with our version numbers.
|
|
touch .scmversion
|
|
|
|
# Mangle /usr/bin/python shebangs to /usr/bin/python3
|
|
# Mangle all Python shebangs to be Python 3 explicitly
|
|
# -p preserves timestamps
|
|
# -n prevents creating ~backup files
|
|
# -i specifies the interpreter for the shebang
|
|
# This fixes errors such as
|
|
# *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly.
|
|
# We patch all sources below for which we got a report/error.
|
|
pathfix.py -i "%{__python3}" -p -n \
|
|
tools/kvm/kvm_stat/kvm_stat \
|
|
scripts/show_delta \
|
|
scripts/diffconfig \
|
|
scripts/bloat-o-meter \
|
|
scripts/jobserver-exec \
|
|
tools \
|
|
Documentation \
|
|
scripts/clang-tools
|
|
|
|
# SBAT data
|
|
sed -e s,@KVER,%{KVERREL}, -e s,@SBAT_SUFFIX,%{sbat_suffix}, %{SOURCE83} > kernel.sbat
|
|
|
|
# only deal with configs if we are going to build for the arch
|
|
%ifnarch %nobuildarches
|
|
|
|
if [ -L configs ]; then
|
|
rm -f configs
|
|
fi
|
|
mkdir configs
|
|
cd configs
|
|
|
|
# Drop some necessary files from the source dir into the buildroot
|
|
cp $RPM_SOURCE_DIR/kernel-*.config .
|
|
cp %{SOURCE80} .
|
|
# merge.pl
|
|
cp %{SOURCE3000} .
|
|
# kernel-local
|
|
cp %{SOURCE3001} .
|
|
FLAVOR=%{primary_target} SPECVERSION=%{version} ./generate_all_configs.sh %{debugbuildsenabled}
|
|
|
|
# Merge in any user-provided local config option changes
|
|
%ifnarch %nobuildarches
|
|
for i in %{all_arch_configs}
|
|
do
|
|
mv $i $i.tmp
|
|
./merge.pl %{SOURCE3001} $i.tmp > $i
|
|
%if %{with_gcov}
|
|
echo "Merging with gcov options"
|
|
cat %{SOURCE75}
|
|
mv $i $i.tmp
|
|
./merge.pl %{SOURCE75} $i.tmp > $i
|
|
%endif
|
|
rm $i.tmp
|
|
done
|
|
%endif
|
|
|
|
%if %{with clang_lto}
|
|
for i in *aarch64*.config *x86_64*.config; do
|
|
sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i
|
|
sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i
|
|
done
|
|
%endif
|
|
|
|
# Add DUP and kpatch certificates to system trusted keys for RHEL
|
|
%if 0%{?rhel}
|
|
%if %{signkernel}%{signmodules}
|
|
openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem
|
|
openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem
|
|
openssl x509 -inform der -in %{SOURCE102} -out rhelimaca1.pem
|
|
openssl x509 -inform der -in %{SOURCE105} -out nvidiagpuoot001.pem
|
|
openssl x509 -inform der -in %{SOURCE106} -out nvidiajetsonsoc.pem
|
|
openssl x509 -inform der -in %{SOURCE107} -out nvidiabfdpu.pem
|
|
cat rheldup3.pem rhelkpatch1.pem rhelimaca1.pem nvidiagpuoot001.pem nvidiajetsonsoc.pem nvidiabfdpu.pem > ../certs/rhel.pem
|
|
%if %{signkernel}
|
|
%ifarch s390x ppc64le
|
|
openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem
|
|
cat secureboot.pem >> ../certs/rhel.pem
|
|
%endif
|
|
%endif
|
|
for i in *.config; do
|
|
sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i
|
|
sed -i 's@CONFIG_EFI_SBAT_FILE=""@CONFIG_EFI_SBAT_FILE="kernel.sbat"@' $i
|
|
done
|
|
%endif
|
|
%endif
|
|
|
|
# Adjust FIPS module name for RHEL
|
|
%if 0%{?rhel}
|
|
for i in *.config; do
|
|
sed -i 's/CONFIG_CRYPTO_FIPS_NAME=.*/CONFIG_CRYPTO_FIPS_NAME="Red Hat Enterprise Linux %{rhel} - Kernel Cryptographic API"/' $i
|
|
done
|
|
%endif
|
|
|
|
cp %{SOURCE81} .
|
|
OPTS=""
|
|
%if %{with_configchecks}
|
|
OPTS="$OPTS -w -n -c"
|
|
%endif
|
|
%if %{with clang_lto}
|
|
for opt in %{clang_make_opts}; do
|
|
OPTS="$OPTS -m $opt"
|
|
done
|
|
%endif
|
|
RHJOBS=$RPM_BUILD_NCPUS PACKAGE_NAME=kernel ./process_configs.sh $OPTS ${specversion}
|
|
|
|
cp %{SOURCE82} .
|
|
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target}
|
|
|
|
# We may want to override files from the primary target in case of building
|
|
# against a flavour of it (eg. centos not rhel), thus override it here if
|
|
# necessary
|
|
if [ "%{primary_target}" == "rhel" ]; then
|
|
%if 0%{?centos}
|
|
echo "Updating scripts/sources to centos version"
|
|
RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh centos
|
|
%else
|
|
echo "Not updating scripts/sources to centos version"
|
|
%endif
|
|
fi
|
|
|
|
# end of kernel config
|
|
%endif
|
|
|
|
cd ..
|
|
# # End of Configs stuff
|
|
|
|
# get rid of unwanted files resulting from patch fuzz
|
|
find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null
|
|
|
|
# remove unnecessary SCM files
|
|
find . -name .gitignore -delete >/dev/null
|
|
|
|
cd ..
|
|
|
|
###
|
|
### build
|
|
###
|
|
%build
|
|
|
|
rm -rf %{buildroot_unstripped} || true
|
|
mkdir -p %{buildroot_unstripped}
|
|
|
|
%if %{with_sparse}
|
|
%define sparse_mflags C=1
|
|
%endif
|
|
|
|
cp_vmlinux()
|
|
{
|
|
eu-strip --remove-comment -o "$2" "$1"
|
|
}
|
|
|
|
# Note we need to disable these flags for cross builds because the flags
|
|
# from redhat-rpm-config assume that host == target so target arch
|
|
# flags cause issues with the host compiler.
|
|
%if !%{with_cross}
|
|
%define build_hostcflags %{?build_cflags}
|
|
%define build_hostldflags %{?build_ldflags}
|
|
%endif
|
|
|
|
%define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}"
|
|
|
|
InitBuildVars() {
|
|
# Initialize the kernel .config file and create some variables that are
|
|
# needed for the actual build process.
|
|
|
|
Variant=$1
|
|
|
|
# Pick the right kernel config file
|
|
Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config
|
|
DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}}
|
|
|
|
KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}}
|
|
|
|
# make sure EXTRAVERSION says what we want it to say
|
|
# Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters
|
|
ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r")
|
|
perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile
|
|
|
|
# if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme
|
|
# if we are post rc1 this should match anyway so this won't matter
|
|
perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile
|
|
|
|
%{make} %{?_smp_mflags} mrproper
|
|
cp configs/$Config .config
|
|
|
|
%if %{signkernel}%{signmodules}
|
|
cp configs/x509.genkey certs/.
|
|
%endif
|
|
|
|
Arch=`head -1 .config | cut -b 3-`
|
|
echo USING ARCH=$Arch
|
|
|
|
KCFLAGS="%{?kcflags}"
|
|
}
|
|
|
|
BuildKernel() {
|
|
MakeTarget=$1
|
|
KernelImage=$2
|
|
DoVDSO=$3
|
|
Variant=$4
|
|
InstallName=${5:-vmlinuz}
|
|
|
|
DoModules=1
|
|
if [ "$Variant" = "zfcpdump" ]; then
|
|
DoModules=0
|
|
fi
|
|
|
|
# When the bootable image is just the ELF kernel, strip it.
|
|
# We already copy the unstripped file into the debuginfo package.
|
|
if [ "$KernelImage" = vmlinux ]; then
|
|
CopyKernel=cp_vmlinux
|
|
else
|
|
CopyKernel=cp
|
|
fi
|
|
|
|
%if %{with_gcov}
|
|
# Make build directory unique for each variant, so that gcno symlinks
|
|
# are also unique for each variant.
|
|
if [ -n "$Variant" ]; then
|
|
ln -s $(pwd) ../linux-%{KVERREL}-${Variant}
|
|
fi
|
|
echo "GCOV - continuing build in: $(pwd)"
|
|
pushd ../linux-%{KVERREL}${Variant:+-${Variant}}
|
|
pwd > ../kernel${Variant:+-${Variant}}-gcov.list
|
|
%endif
|
|
|
|
InitBuildVars $Variant
|
|
|
|
echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}...
|
|
|
|
%{make} ARCH=$Arch olddefconfig >/dev/null
|
|
|
|
# This ensures build-ids are unique to allow parallel debuginfo
|
|
perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config
|
|
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags}
|
|
if [ $DoModules -eq 1 ]; then
|
|
%{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1
|
|
fi
|
|
|
|
mkdir -p $RPM_BUILD_ROOT/%{image_install_path}
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/systemtap
|
|
%if %{with_debuginfo}
|
|
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path}
|
|
%endif
|
|
|
|
%ifarch %{arm} aarch64
|
|
%{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
|
|
%{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer
|
|
cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb
|
|
find arch/$Arch/boot/dts -name '*.dtb' -type f -delete
|
|
%endif
|
|
|
|
# Start installing the results
|
|
install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer
|
|
install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config
|
|
install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer
|
|
install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map
|
|
|
|
# We estimate the size of the initramfs because rpm needs to take this size
|
|
# into consideration when performing disk space calculations. (See bz #530778)
|
|
dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20
|
|
|
|
if [ -f arch/$Arch/boot/zImage.stub ]; then
|
|
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || :
|
|
cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || :
|
|
fi
|
|
|
|
%if %{signkernel}
|
|
if [ "$KernelImage" = vmlinux ]; then
|
|
# We can't strip and sign $KernelImage in place, because
|
|
# we need to preserve original vmlinux for debuginfo.
|
|
# Use a copy for signing.
|
|
$CopyKernel $KernelImage $KernelImage.tosign
|
|
KernelImage=$KernelImage.tosign
|
|
CopyKernel=cp
|
|
fi
|
|
|
|
# Sign the image if we're using EFI
|
|
# aarch64 kernels are gziped EFI images
|
|
KernelExtension=${KernelImage##*.}
|
|
if [ "$KernelExtension" == "gz" ]; then
|
|
SignImage=${KernelImage%.*}
|
|
else
|
|
SignImage=$KernelImage
|
|
fi
|
|
|
|
%ifarch x86_64 aarch64
|
|
%pesign -s -i $SignImage -o vmlinuz.signed -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0}
|
|
%endif
|
|
%ifarch s390x ppc64le
|
|
if [ -x /usr/bin/rpm-sign ]; then
|
|
rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed
|
|
elif [ "$DoModules" == "1" -a "%{signmodules}" == "1" ]; then
|
|
chmod +x scripts/sign-file
|
|
./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed
|
|
else
|
|
mv $SignImage vmlinuz.signed
|
|
fi
|
|
%endif
|
|
|
|
if [ ! -s vmlinuz.signed ]; then
|
|
echo "pesigning failed"
|
|
exit 1
|
|
fi
|
|
mv vmlinuz.signed $SignImage
|
|
if [ "$KernelExtension" == "gz" ]; then
|
|
gzip -f9 $SignImage
|
|
fi
|
|
# signkernel
|
|
%endif
|
|
|
|
$CopyKernel $KernelImage \
|
|
$RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
|
|
chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
|
|
cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName
|
|
|
|
# hmac sign the kernel for FIPS
|
|
echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac"
|
|
ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer
|
|
(cd $RPM_BUILD_ROOT/%{image_install_path} && sha512hmac $InstallName-$KernelVer) > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac;
|
|
cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac
|
|
|
|
if [ $DoModules -eq 1 ]; then
|
|
# Override $(mod-fw) because we don't want it to install any firmware
|
|
# we'll get it from the linux-firmware package and we don't want conflicts
|
|
%{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw=
|
|
fi
|
|
|
|
%if %{with_gcov}
|
|
# install gcov-needed files to $BUILDROOT/$BUILD/...:
|
|
# gcov_info->filename is absolute path
|
|
# gcno references to sources can use absolute paths (e.g. in out-of-tree builds)
|
|
# sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir
|
|
find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \;
|
|
%endif
|
|
|
|
# add an a noop %%defattr statement 'cause rpm doesn't like empty file list files
|
|
echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list
|
|
if [ $DoVDSO -ne 0 ]; then
|
|
%{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer
|
|
if [ -s ldconfig-kernel.conf ]; then
|
|
install -D -m 444 ldconfig-kernel.conf \
|
|
$RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf
|
|
echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list
|
|
fi
|
|
|
|
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id
|
|
fi
|
|
|
|
# And save the headers/makefiles etc for building modules against
|
|
#
|
|
# This all looks scary, but the end result is supposed to be:
|
|
# * all arch relevant include/ files
|
|
# * all Makefile/Kconfig files
|
|
# * all script/ files
|
|
|
|
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
(cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source)
|
|
# dirs for additional modules per module-init-tools, kbuild/modules.txt
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates
|
|
# CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of
|
|
# testing so just delete
|
|
find . -name *.h.s -delete
|
|
# first copy everything
|
|
cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
if [ ! -e Module.symvers ]; then
|
|
touch Module.symvers
|
|
fi
|
|
cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
if [ -s Module.markers ]; then
|
|
cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
fi
|
|
|
|
# create the kABI metadata for use in packaging
|
|
# NOTENOTE: the name symvers is used by the rpm backend
|
|
# NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr
|
|
# NOTENOTE: script which dynamically adds exported kernel symbol
|
|
# NOTENOTE: checksums to the rpm metadata provides list.
|
|
# NOTENOTE: if you change the symvers name, update the backend too
|
|
echo "**** GENERATING kernel ABI metadata ****"
|
|
gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz
|
|
cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz
|
|
|
|
%if %{with_kabichk}
|
|
echo "**** kABI checking is enabled in kernel SPEC file. ****"
|
|
chmod 0755 $RPM_SOURCE_DIR/check-kabi
|
|
if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then
|
|
cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
|
|
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
|
|
# for now, don't keep it around.
|
|
rm $RPM_BUILD_ROOT/Module.kabi
|
|
else
|
|
echo "**** NOTE: Cannot find reference Module.kabi file. ****"
|
|
fi
|
|
%endif
|
|
|
|
%if %{with_kabidupchk}
|
|
echo "**** kABI DUP checking is enabled in kernel SPEC file. ****"
|
|
if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then
|
|
cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi
|
|
$RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1
|
|
# for now, don't keep it around.
|
|
rm $RPM_BUILD_ROOT/Module.kabi
|
|
else
|
|
echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****"
|
|
fi
|
|
%endif
|
|
|
|
%if %{with_kabidw_base}
|
|
# Don't build kabi base for debug kernels
|
|
if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then
|
|
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
|
|
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
|
|
|
|
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
|
|
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
|
|
|
|
echo "**** GENERATING DWARF-based kABI baseline dataset ****"
|
|
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
|
|
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
|
|
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
|
|
"$(pwd)" \
|
|
"$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || :
|
|
|
|
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
|
|
fi
|
|
%endif
|
|
|
|
%if %{with_kabidwchk}
|
|
if [ "$Variant" != "zfcpdump" ]; then
|
|
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf
|
|
tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf
|
|
if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then
|
|
mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists
|
|
tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists
|
|
|
|
echo "**** GENERATING DWARF-based kABI dataset ****"
|
|
chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh
|
|
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \
|
|
"$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \
|
|
"$(pwd)" \
|
|
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
|
|
|
|
echo "**** kABI DWARF-based comparison report ****"
|
|
$RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \
|
|
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \
|
|
"$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || :
|
|
echo "**** End of kABI DWARF-based comparison report ****"
|
|
else
|
|
echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****"
|
|
fi
|
|
|
|
rm -rf $RPM_BUILD_ROOT/kabi-dwarf
|
|
fi
|
|
%endif
|
|
|
|
# then drop all but the needed Makefiles/Kconfig files
|
|
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts
|
|
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
|
|
cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing
|
|
rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py
|
|
|
|
%ifarch s390x
|
|
# CONFIG_EXPOLINE_EXTERN=y produces arch/s390/lib/expoline/expoline.o
|
|
# which is needed during external module build.
|
|
if [ -f arch/s390/lib/expoline/expoline.o ]; then
|
|
cp -a --parents arch/s390/lib/expoline/expoline.o $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
fi
|
|
%endif
|
|
|
|
# Files for 'make scripts' to succeed with kernel-devel.
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include
|
|
cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools
|
|
cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
# Files for 'make prepare' to succeed with kernel-devel.
|
|
cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
cp -a --parents tools/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
if [ -f tools/objtool/objtool ]; then
|
|
cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
|
|
fi
|
|
if [ -f tools/objtool/fixdep ]; then
|
|
cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || :
|
|
fi
|
|
if [ -d arch/$Arch/scripts ]; then
|
|
cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || :
|
|
fi
|
|
if [ -f arch/$Arch/*lds ]; then
|
|
cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || :
|
|
fi
|
|
if [ -f arch/%{asmarch}/kernel/module.lds ]; then
|
|
cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
fi
|
|
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
|
|
%ifarch ppc64le
|
|
cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
%endif
|
|
if [ -d arch/%{asmarch}/include ]; then
|
|
cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
fi
|
|
if [ -d tools/arch/%{asmarch}/include ]; then
|
|
cp -a --parents tools/arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
fi
|
|
%ifarch aarch64
|
|
# arch/arm64/include/asm/xen references arch/arm
|
|
cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
# arch/arm64/include/asm/opcodes.h references arch/arm
|
|
cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
%endif
|
|
# include the machine specific headers for ARM variants, if available.
|
|
%ifarch %{arm}
|
|
if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then
|
|
cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
fi
|
|
# include a few files for 'make prepare'
|
|
cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
|
|
%endif
|
|
cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include
|
|
# Cross-reference from include/perf/events/sof.h
|
|
cp -a sound/soc/sof/sof-audio.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/sound/soc/sof
|
|
%ifarch i686 x86_64
|
|
# files for 'make prepare' to succeed with kernel-devel
|
|
cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
|
|
cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/
|
|
|
|
cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
%endif
|
|
# Clean up intermediate tools files
|
|
find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} +
|
|
|
|
# Make sure the Makefile, version.h, and auto.conf have a matching
|
|
# timestamp so that external modules can be built
|
|
touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile \
|
|
$RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h \
|
|
$RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf
|
|
|
|
%if %{with_debuginfo}
|
|
eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id
|
|
cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id
|
|
|
|
#
|
|
# save the vmlinux file for kernel debugging into the kernel-debuginfo rpm
|
|
#
|
|
mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
|
|
cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer
|
|
if [ -n "%{vmlinux_decompressor}" ]; then
|
|
eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id
|
|
# Without build-id the build will fail. But for s390 the build-id
|
|
# wasn't added before 5.11. In case it is missing prefer not
|
|
# packaging the debuginfo over a build failure.
|
|
if [ -s vmlinux.decompressor.id ]; then
|
|
cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id
|
|
cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor
|
|
fi
|
|
fi
|
|
%endif
|
|
|
|
find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames
|
|
|
|
# mark modules executable so that strip-to-file can strip them
|
|
xargs --no-run-if-empty chmod u+x < modnames
|
|
|
|
# Generate a list of modules for block and networking.
|
|
|
|
grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA |
|
|
sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef
|
|
|
|
collect_modules_list()
|
|
{
|
|
sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef |
|
|
LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
|
|
if [ ! -z "$3" ]; then
|
|
sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1
|
|
fi
|
|
}
|
|
|
|
collect_modules_list networking \
|
|
'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice'
|
|
collect_modules_list block \
|
|
'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko'
|
|
collect_modules_list drm \
|
|
'drm_open|drm_init'
|
|
collect_modules_list modesetting \
|
|
'drm_crtc_init'
|
|
|
|
# detect missing or incorrect license tags
|
|
( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \
|
|
grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1
|
|
|
|
remove_depmod_files()
|
|
{
|
|
# remove files that will be auto generated by depmod at rpm -i time
|
|
pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/
|
|
# in case below list needs to be extended, remember to add a
|
|
# matching ghost entry in the files section as well
|
|
rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \
|
|
modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin}
|
|
popd
|
|
}
|
|
|
|
remove_depmod_files
|
|
|
|
# Identify modules in the kernel-modules-extras package
|
|
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer $(realpath configs/mod-extra.list)
|
|
# Identify modules in the kernel-modules-extras package
|
|
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE84} internal
|
|
%if 0%{!?fedora:1}
|
|
# Identify modules in the kernel-modules-partner package
|
|
%{SOURCE20} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE85} partner
|
|
%endif
|
|
|
|
#
|
|
# Generate the kernel-core and kernel-modules files lists
|
|
#
|
|
|
|
# Copy the System.map file for depmod to use, and create a backup of the
|
|
# full module tree so we can restore it after we're done filtering
|
|
cp System.map $RPM_BUILD_ROOT/.
|
|
cp configs/filter-*.sh $RPM_BUILD_ROOT/.
|
|
pushd $RPM_BUILD_ROOT
|
|
mkdir restore
|
|
cp -r lib/modules/$KernelVer/* restore/.
|
|
|
|
# don't include anything going into kernel-modules-extra in the file lists
|
|
xargs rm -rf < mod-extra.list
|
|
# don't include anything going int kernel-modules-internal in the file lists
|
|
xargs rm -rf < mod-internal.list
|
|
%if 0%{!?fedora:1}
|
|
# don't include anything going int kernel-modules-partner in the file lists
|
|
xargs rm -rf < mod-partner.list
|
|
%endif
|
|
|
|
if [ $DoModules -eq 1 ]; then
|
|
# Find all the module files and filter them out into the core and
|
|
# modules lists. This actually removes anything going into -modules
|
|
# from the dir.
|
|
find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list
|
|
./filter-modules.sh modules.list %{_target_cpu}
|
|
rm filter-*.sh
|
|
|
|
# Run depmod on the resulting module tree and make sure it isn't broken
|
|
depmod -b . -aeF ./System.map $KernelVer &> depmod.out
|
|
if [ -s depmod.out ]; then
|
|
echo "Depmod failure"
|
|
cat depmod.out
|
|
exit 1
|
|
else
|
|
rm depmod.out
|
|
fi
|
|
else
|
|
# Ensure important files/directories exist to let the packaging succeed
|
|
echo '%%defattr(-,-,-)' > modules.list
|
|
echo '%%defattr(-,-,-)' > k-d.list
|
|
mkdir -p lib/modules/$KernelVer/kernel
|
|
# Add files usually created by make modules, needed to prevent errors
|
|
# thrown by depmod during package installation
|
|
touch lib/modules/$KernelVer/modules.order
|
|
touch lib/modules/$KernelVer/modules.builtin
|
|
fi
|
|
|
|
%if %{efiuki}
|
|
if [ "$Variant" != "rt" ] && [ "$Variant" != "rt-debug" ] && [ "$Variant" != "rt-64k" ] && [ "$Variant" != "rt-64k-debug" ]; then
|
|
popd
|
|
|
|
SBAT=$(cat <<- EOF
|
|
linux,1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
|
|
linux.%{sbat_suffix},1,Red Hat,linux,$KernelVer,mailto:secalert@redhat.com
|
|
kernel-uki-virt.%{sbat_suffix},1,Red Hat,kernel-uki-virt,$KernelVer,mailto:secalert@redhat.com
|
|
EOF
|
|
)
|
|
|
|
ADDONS_SBAT=$(cat <<- EOF
|
|
sbat,1,SBAT Version,sbat,1,https://github.com/rhboot/shim/blob/main/SBAT.md
|
|
kernel-uki-virt-addons.%{sbat_suffix},1,Red Hat,kernel-uki-virt-addons,$KernelVer,mailto:secalert@redhat.com
|
|
EOF
|
|
)
|
|
|
|
KernelUnifiedImageDir="$RPM_BUILD_ROOT/lib/modules/$KernelVer"
|
|
KernelUnifiedImage="$KernelUnifiedImageDir/$InstallName-virt.efi"
|
|
|
|
mkdir -p $KernelUnifiedImageDir
|
|
|
|
dracut --conf=%{SOURCE150} \
|
|
--confdir=$(mktemp -d) \
|
|
--verbose \
|
|
--kver "$KernelVer" \
|
|
--kmoddir "$RPM_BUILD_ROOT/lib/modules/$KernelVer/" \
|
|
--logfile=$(mktemp) \
|
|
--uefi \
|
|
--sbat "$SBAT" \
|
|
--kernel-image $(realpath $KernelImage) \
|
|
--kernel-cmdline 'console=tty0 console=ttyS0' \
|
|
$KernelUnifiedImage
|
|
|
|
KernelAddonsDirOut="$KernelUnifiedImage.extra.d"
|
|
mkdir -p $KernelAddonsDirOut
|
|
python3 %{SOURCE151} %{SOURCE152} $KernelAddonsDirOut virt %{primary_target} %{_target_cpu} "$ADDONS_SBAT"
|
|
|
|
%if %{signkernel}
|
|
|
|
%if 0%{?centos}
|
|
UKI_secureboot_name=centossecureboot204
|
|
UKI_secureboot_cert=%{_datadir}/pki/sb-certs/secureboot-uki-virt-%{_arch}.cer
|
|
%else
|
|
# RHEL only builds UKI for x86
|
|
UKI_secureboot_name=redhatsecureboot504
|
|
UKI_secureboot_cert=%{SOURCE153}
|
|
%endif
|
|
|
|
%pesign -s -i $KernelUnifiedImage -o $KernelUnifiedImage.signed -a %{secureboot_ca_0} -c $UKI_secureboot_cert -n $UKI_secureboot_name
|
|
if [ ! -s $KernelUnifiedImage.signed ]; then
|
|
echo "pesigning failed"
|
|
exit 1
|
|
fi
|
|
mv $KernelUnifiedImage.signed $KernelUnifiedImage
|
|
|
|
for addon in "$KernelAddonsDirOut"/*; do
|
|
%pesign -s -i $addon -o $addon.signed -a %{secureboot_ca_0} -c $UKI_secureboot_cert -n $UKI_secureboot_name
|
|
rm -f $addon
|
|
mv $addon.signed $addon
|
|
done
|
|
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
|
|
cp -a $UKI_secureboot_cert $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/secureboot-uki-%{_arch}.cer
|
|
|
|
# signkernel
|
|
%endif
|
|
|
|
# hmac sign the UKI for FIPS
|
|
KernelUnifiedImageHMAC="$KernelUnifiedImageDir/.$InstallName-virt.efi.hmac"
|
|
echo "hmac sign the UKI for FIPS"
|
|
echo "Creating hmac file: $KernelUnifiedImageHMAC"
|
|
(cd $KernelUnifiedImageDir && sha512hmac $InstallName-virt.efi) > $KernelUnifiedImageHMAC;
|
|
|
|
pushd $RPM_BUILD_ROOT
|
|
|
|
# Variant != rt && Variant != rt-debug && Variant != rt-64k && Variant != rt-64k-debug
|
|
fi
|
|
# efiuki
|
|
%endif
|
|
|
|
remove_depmod_files
|
|
|
|
# Go back and find all of the various directories in the tree. We use this
|
|
# for the dir lists in kernel-core
|
|
find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list
|
|
|
|
# Cleanup
|
|
rm System.map
|
|
# Just "cp -r" can be very slow: here, it rewrites _existing files_
|
|
# with open(O_TRUNC). Many filesystems synchronously wait for metadata
|
|
# update for such file rewrites (seen in strace as final close syscall
|
|
# taking a long time). On a rotational disk, cp was observed to take
|
|
# more than 5 minutes on ext4 and more than 15 minutes (!) on xfs.
|
|
# With --remove-destination, we avoid this, and copying
|
|
# (with enough RAM to cache it) takes 5 seconds:
|
|
cp -r --remove-destination restore/* lib/modules/$KernelVer/.
|
|
rm -rf restore
|
|
popd
|
|
|
|
# Make sure the files lists start with absolute paths or rpmbuild fails.
|
|
# Also add in the dir entries
|
|
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list
|
|
sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-modules-core.list
|
|
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-modules-core.list
|
|
sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list
|
|
|
|
# Cleanup
|
|
rm -f $RPM_BUILD_ROOT/k-d.list
|
|
rm -f $RPM_BUILD_ROOT/modules.list
|
|
rm -f $RPM_BUILD_ROOT/module-dirs.list
|
|
rm -f $RPM_BUILD_ROOT/mod-extra.list
|
|
rm -f $RPM_BUILD_ROOT/mod-internal.list
|
|
%if 0%{!?fedora:1}
|
|
rm -f $RPM_BUILD_ROOT/mod-partner.list
|
|
%endif
|
|
|
|
%if %{with_cross}
|
|
make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build M=scripts clean
|
|
make -C $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/bpf/resolve_btfids clean
|
|
sed -i 's/REBUILD_SCRIPTS_FOR_CROSS:=0/REBUILD_SCRIPTS_FOR_CROSS:=1/' $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile
|
|
%endif
|
|
|
|
# Move the devel headers out of the root file system
|
|
mkdir -p $RPM_BUILD_ROOT/usr/src/kernels
|
|
mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir
|
|
|
|
# This is going to create a broken link during the build, but we don't use
|
|
# it after this point. We need the link to actually point to something
|
|
# when kernel-devel is installed, and a relative link doesn't work across
|
|
# the F17 UsrMove feature.
|
|
ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build
|
|
|
|
%ifnarch armv7hl
|
|
# Generate vmlinux.h and put it to kernel-devel path
|
|
# zfcpdump build does not have btf anymore
|
|
if [ "$Variant" != "zfcpdump" ]; then
|
|
# Build the bootstrap bpftool to generate vmlinux.h
|
|
make -C tools/bpf/bpftool bootstrap
|
|
tools/bpf/bpftool/bootstrap/bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h
|
|
fi
|
|
%endif
|
|
|
|
# prune junk from kernel-devel
|
|
find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete
|
|
|
|
# Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel
|
|
mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer
|
|
%if %{signkernel}
|
|
install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
|
|
%ifarch s390x ppc64le
|
|
if [ -x /usr/bin/rpm-sign ]; then
|
|
install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
|
|
fi
|
|
%endif
|
|
%endif
|
|
|
|
%if 0%{?rhel}
|
|
# Red Hat IMA code-signing cert, which is used to authenticate package files
|
|
install -m 0644 %{ima_signing_cert} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{ima_cert_name}
|
|
%endif
|
|
|
|
%if %{signmodules}
|
|
if [ $DoModules -eq 1 ]; then
|
|
# Save the signing keys so we can sign the modules in __modsign_install_post
|
|
cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}}
|
|
cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}}
|
|
%ifarch s390x ppc64le
|
|
if [ ! -x /usr/bin/rpm-sign ]; then
|
|
install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer
|
|
openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
|
|
chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename}
|
|
fi
|
|
%endif
|
|
fi
|
|
%endif
|
|
|
|
%if %{with_gcov}
|
|
popd
|
|
%endif
|
|
}
|
|
|
|
###
|
|
# DO it...
|
|
###
|
|
|
|
# prepare directories
|
|
rm -rf $RPM_BUILD_ROOT
|
|
mkdir -p $RPM_BUILD_ROOT/boot
|
|
mkdir -p $RPM_BUILD_ROOT%{_libexecdir}
|
|
|
|
cd linux-%{KVERREL}
|
|
|
|
|
|
%if %{with_debug}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} debug
|
|
%if %{with_arm64_64k}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} 64k-debug
|
|
%endif
|
|
%if %{with_realtime}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} rt-debug
|
|
%endif
|
|
%if %{with_realtime_arm64_64k}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} rt-64k-debug
|
|
%endif
|
|
%endif
|
|
|
|
%if %{with_zfcpdump}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump
|
|
%endif
|
|
|
|
%if %{with_arm64_64k}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} 64k
|
|
%endif
|
|
|
|
%if %{with_pae}
|
|
BuildKernel %make_target %kernel_image %{use_vdso} lpae
|
|
%endif
|
|
|
|
%if %{with_realtime}
|
|
BuildKernel %make_target %kernel_image %{use_vdso} rt
|
|
%endif
|
|
|
|
%if %{with_realtime_arm64_64k}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso} rt-64k
|
|
%endif
|
|
|
|
%if %{with_up}
|
|
BuildKernel %make_target %kernel_image %{_use_vdso}
|
|
%endif
|
|
|
|
%ifnarch noarch i686
|
|
%if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up} && !%{with_arm64_64k} && !%{with_realtime} && !%{with_realtime_arm64_64k}
|
|
# If only building the user space tools, then initialize the build environment
|
|
# and some variables so that the various userspace tools can be built.
|
|
InitBuildVars
|
|
%endif
|
|
%endif
|
|
|
|
%ifarch aarch64
|
|
%global perf_build_extra_opts CORESIGHT=1
|
|
%endif
|
|
%global perf_make \
|
|
%{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_CXXFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags} -Wl,-E" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3}
|
|
%if %{with_perf}
|
|
# perf
|
|
# make sure check-headers.sh is executable
|
|
chmod +x tools/perf/check-headers.sh
|
|
%{perf_make} DESTDIR=$RPM_BUILD_ROOT all
|
|
# libperf
|
|
make -C tools/lib/perf V=1
|
|
%endif
|
|
|
|
%global tools_make \
|
|
CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" EXTRA_CFLAGS="${RPM_OPT_FLAGS}" %{make} %{?make_opts}
|
|
|
|
%ifarch %{cpupowerarchs}
|
|
# link against in-tree libcpupower for idle state support
|
|
%global rtla_make %{tools_make} LDFLAGS="%{__global_ldflags} -L../../power/cpupower" INCLUDES="-I../../power/cpupower/lib"
|
|
%else
|
|
%global rtla_make %{tools_make}
|
|
%endif
|
|
|
|
%if %{with_tools}
|
|
%ifarch %{cpupowerarchs}
|
|
# cpupower
|
|
# make sure version-gen.sh is executable.
|
|
chmod +x tools/power/cpupower/utils/version-gen.sh
|
|
%{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false
|
|
%ifarch x86_64
|
|
pushd tools/power/cpupower/debug/x86_64
|
|
%{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode
|
|
popd
|
|
%endif
|
|
%ifarch x86_64
|
|
pushd tools/power/x86/x86_energy_perf_policy/
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/power/x86/turbostat
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/power/x86/intel-speed-select
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/arch/x86/intel_sdsi
|
|
%{tools_make} CFLAGS="${RPM_OPT_FLAGS}"
|
|
popd
|
|
%endif
|
|
%endif
|
|
pushd tools/thermal/tmon/
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/bootconfig/
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/iio/
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/gpio/
|
|
%{tools_make}
|
|
popd
|
|
# build VM tools
|
|
pushd tools/mm/
|
|
%{tools_make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" slabinfo page_owner_sort
|
|
popd
|
|
pushd tools/verification/rv/
|
|
%{tools_make}
|
|
popd
|
|
pushd tools/tracing/rtla
|
|
%{rtla_make}
|
|
popd
|
|
%endif
|
|
|
|
if [ -f $DevelDir/vmlinux.h ]; then
|
|
RPM_VMLINUX_H=$DevelDir/vmlinux.h
|
|
fi
|
|
echo "${RPM_VMLINUX_H}" > ../vmlinux_h_path
|
|
|
|
%if %{with_selftests}
|
|
# Unfortunately, samples/bpf/Makefile expects that the headers are installed
|
|
# in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr
|
|
# but there's no way to tell the Makefile to take them from there.
|
|
%{make} %{?_smp_mflags} headers_install
|
|
|
|
# If we re building only tools without kernel, we need to generate config
|
|
# headers and prepare tree for modules building. The modules_prepare target
|
|
# will cover both.
|
|
if [ ! -f include/generated/autoconf.h ]; then
|
|
%{make} %{?_smp_mflags} modules_prepare
|
|
fi
|
|
|
|
%{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ VMLINUX_H="${RPM_VMLINUX_H}" || true
|
|
|
|
pushd tools/testing/selftests
|
|
# We need to install here because we need to call make with ARCH set which
|
|
# doesn't seem possible to do in the install section.
|
|
%{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf cgroup kmod mm livepatch net net/forwarding net/hsr net/mptcp net/netfilter tc-testing memfd drivers/net/bonding iommu cachestat drivers/net" SKIP_TARGETS="" FORCE_TARGETS=1 INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" DEFAULT_INSTALL_HDR_PATH=0 install
|
|
|
|
# 'make install' for bpf is broken and upstream refuses to fix it.
|
|
# Install the needed files manually.
|
|
for dir in bpf bpf/no_alu32 bpf/cpuv4 bpf/progs; do
|
|
# In ARK, the rpm build continues even if some of the selftests
|
|
# cannot be built. It's not always possible to build selftests,
|
|
# as upstream sometimes dependens on too new llvm version or has
|
|
# other issues. If something did not get built, just skip it.
|
|
test -d $dir || continue
|
|
mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir
|
|
find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \
|
|
-name 'btf_dump_test_case_*.c' -o -name '*.ko' -o \
|
|
-name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \
|
|
xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true
|
|
done
|
|
ln -sr %{buildroot}%{_libexecdir}/kselftests/bpf/bpftool %{buildroot}%{_libexecdir}/kselftests/bpf/no_alu32/bpftool
|
|
|
|
# CKI clang does not support cpuv4 so it skips this variant
|
|
ln -sr %{buildroot}%{_libexecdir}/kselftests/bpf/bpftool %{buildroot}%{_libexecdir}/kselftests/bpf/cpuv4/bpftool || echo "selftests/bpf: no cpuv4 variant"
|
|
|
|
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs"
|
|
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs-no_alu32"
|
|
%buildroot_save_unstripped "usr/libexec/kselftests/bpf/test_progs-cpuv4"
|
|
popd
|
|
%endif
|
|
|
|
%if %{with_doc}
|
|
# Make the HTML pages.
|
|
%{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail}
|
|
|
|
# sometimes non-world-readable files sneak into the kernel source tree
|
|
chmod -R a=rX Documentation
|
|
find Documentation -type d | xargs chmod u+w
|
|
%endif
|
|
|
|
# In the modsign case, we do 3 things. 1) We check the "variant" and hard
|
|
# code the value in the following invocations. This is somewhat sub-optimal
|
|
# but we're doing this inside of an RPM macro and it isn't as easy as it
|
|
# could be because of that. 2) We restore the .tmp_versions/ directory from
|
|
# the one we saved off in BuildKernel above. This is to make sure we're
|
|
# signing the modules we actually built/installed in that variant. 3) We
|
|
# grab the arch and invoke mod-sign.sh command to actually sign the modules.
|
|
#
|
|
# We have to do all of those things _after_ find-debuginfo runs, otherwise
|
|
# that will strip the signature off of the modules.
|
|
#
|
|
# Don't sign modules for the zfcpdump variant as it is monolithic.
|
|
|
|
%define __modsign_install_post \
|
|
if [ "%{signmodules}" -eq "1" ]; then \
|
|
if [ "%{with_pae}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \
|
|
fi \
|
|
if [ "%{with_realtime}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+rt certs/signing_key.x509.sign+rt $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt/ \
|
|
fi \
|
|
if [ "%{with_debug}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \
|
|
fi \
|
|
if [ "%{with_arm64_64k}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+64k certs/signing_key.x509.sign+64k $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k/ \
|
|
fi \
|
|
if [ "%{with_arm64_64k}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+64k-debug certs/signing_key.x509.sign+64k-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+64k-debug/ \
|
|
fi \
|
|
if [ "%{with_realtime}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+rt-debug certs/signing_key.x509.sign+rt-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt-debug/ \
|
|
fi \
|
|
if [ "%{with_realtime_arm64_64k}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+rt-64k certs/signing_key.x509.sign+rt-64k $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt-64k/ \
|
|
fi \
|
|
if [ "%{with_realtime_arm64_64k}" -ne "0" ] && [ "%{with_debug}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign+rt-64k-debug certs/signing_key.x509.sign+rt-64k-debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+rt-64k-debug/ \
|
|
fi \
|
|
if [ "%{with_up}" -ne "0" ]; then \
|
|
%{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \
|
|
fi \
|
|
fi \
|
|
if [ "%{zipmodules}" -eq "1" ]; then \
|
|
echo "Compressing kernel modules ..." \
|
|
find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -n 16 -P${RPM_BUILD_NCPUS} -r %compression %compression_flags; \
|
|
fi \
|
|
%{nil}
|
|
|
|
###
|
|
### Special hacks for debuginfo subpackages.
|
|
###
|
|
|
|
# This macro is used by %%install, so we must redefine it before that.
|
|
%define debug_package %{nil}
|
|
|
|
%if %{with_debuginfo}
|
|
|
|
%ifnarch noarch
|
|
%global __debug_package 1
|
|
%files -f debugfiles.list debuginfo-common-%{_target_cpu}
|
|
%endif
|
|
|
|
%endif
|
|
|
|
# We don't want to package debuginfo for self-tests and samples but
|
|
# we have to delete them to avoid an error messages about unpackaged
|
|
# files.
|
|
# Delete the debuginfo for kernel-devel files
|
|
%define __remove_unwanted_dbginfo_install_post \
|
|
if [ "%{with_selftests}" -ne "0" ]; then \
|
|
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \
|
|
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \
|
|
fi \
|
|
rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \
|
|
%{nil}
|
|
|
|
#
|
|
# Disgusting hack alert! We need to ensure we sign modules *after* all
|
|
# invocations of strip occur, which is in __debug_install_post if
|
|
# find-debuginfo.sh runs, and __os_install_post if not.
|
|
#
|
|
%define __spec_install_post \
|
|
%{?__debug_package:%{__debug_install_post}}\
|
|
%{__arch_install_post}\
|
|
%{__os_install_post}\
|
|
%{__remove_unwanted_dbginfo_install_post}\
|
|
%{__restore_unstripped_root_post}\
|
|
%{__modsign_install_post}
|
|
|
|
###
|
|
### install
|
|
###
|
|
|
|
%install
|
|
|
|
cd linux-%{KVERREL}
|
|
|
|
# re-define RPM_VMLINUX_H, because it doesn't carry over from %build
|
|
RPM_VMLINUX_H="$(cat ../vmlinux_h_path)"
|
|
|
|
%if %{with_doc}
|
|
docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
|
|
|
|
# copy the source over
|
|
mkdir -p $docdir
|
|
tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir
|
|
cat %{SOURCE2} | xz > $docdir/kernel.changelog.xz
|
|
chmod 0644 $docdir/kernel.changelog.xz
|
|
|
|
# with_doc
|
|
%endif
|
|
|
|
# We have to do the headers install before the tools install because the
|
|
# kernel headers_install will remove any header files in /usr/include that
|
|
# it doesn't install itself.
|
|
|
|
%if %{with_headers}
|
|
# Install kernel headers
|
|
%{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install
|
|
|
|
find $RPM_BUILD_ROOT/usr/include \
|
|
\( -name .install -o -name .check -o \
|
|
-name ..install.cmd -o -name ..check.cmd \) -delete
|
|
|
|
%endif
|
|
|
|
%if %{with_cross_headers}
|
|
%if 0%{?fedora}
|
|
HDR_ARCH_LIST='arm arm64 powerpc s390 x86'
|
|
%else
|
|
HDR_ARCH_LIST='arm64 powerpc s390 x86'
|
|
%endif
|
|
mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers
|
|
|
|
for arch in $HDR_ARCH_LIST; do
|
|
mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}
|
|
%{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install
|
|
done
|
|
|
|
find $RPM_BUILD_ROOT/usr/tmp-headers \
|
|
\( -name .install -o -name .check -o \
|
|
-name ..install.cmd -o -name ..check.cmd \) -delete
|
|
|
|
# Copy all the architectures we care about to their respective asm directories
|
|
for arch in $HDR_ARCH_LIST ; do
|
|
mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include
|
|
mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/
|
|
done
|
|
|
|
rm -rf $RPM_BUILD_ROOT/usr/tmp-headers
|
|
%endif
|
|
|
|
%if %{with_kernel_abi_stablelists}
|
|
# kabi directory
|
|
INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/
|
|
mkdir -p $INSTALL_KABI_PATH
|
|
|
|
# install kabi releases directories
|
|
tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH
|
|
# with_kernel_abi_stablelists
|
|
%endif
|
|
|
|
%if %{with_perf}
|
|
# perf tool binary and supporting scripts/binaries
|
|
%{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin
|
|
# remove the 'trace' symlink.
|
|
rm -f %{buildroot}%{_bindir}/trace
|
|
|
|
# For both of the below, yes, this should be using a macro but right now
|
|
# it's hard coded and we don't actually want it anyway right now.
|
|
# Whoever wants examples can fix it up!
|
|
|
|
# remove examples
|
|
rm -rf %{buildroot}/usr/lib/perf/examples
|
|
rm -rf %{buildroot}/usr/lib/perf/include
|
|
|
|
# python-perf extension
|
|
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext
|
|
|
|
# perf man pages (note: implicit rpm magic compresses them later)
|
|
mkdir -p %{buildroot}/%{_mandir}/man1
|
|
%{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man
|
|
|
|
# remove any tracevent files, eg. its plugins still gets built and installed,
|
|
# even if we build against system's libtracevent during perf build (by setting
|
|
# LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already
|
|
# ship with libtraceevent package.
|
|
rm -rf %{buildroot}%{_libdir}/traceevent
|
|
|
|
# libperf
|
|
make -C tools/lib/perf DESTDIR=%{buildroot} prefix=%{_prefix} libdir=%{_libdir} V=1 install
|
|
rm -f %{buildroot}%{_libdir}/libperf.a
|
|
%endif
|
|
|
|
%if %{with_tools}
|
|
%ifarch %{cpupowerarchs}
|
|
%{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install
|
|
rm -f %{buildroot}%{_libdir}/*.{a,la}
|
|
%find_lang cpupower
|
|
mv cpupower.lang ../
|
|
%ifarch x86_64
|
|
pushd tools/power/cpupower/debug/x86_64
|
|
install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode
|
|
install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode
|
|
popd
|
|
%endif
|
|
chmod 0755 %{buildroot}%{_libdir}/libcpupower.so*
|
|
mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig
|
|
install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service
|
|
install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower
|
|
%endif
|
|
%ifarch x86_64
|
|
mkdir -p %{buildroot}%{_mandir}/man8
|
|
pushd tools/power/x86/x86_energy_perf_policy
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
pushd tools/power/x86/turbostat
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
pushd tools/power/x86/intel-speed-select
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
pushd tools/arch/x86/intel_sdsi
|
|
%{tools_make} CFLAGS="${RPM_OPT_FLAGS}" DESTDIR=%{buildroot} install
|
|
popd
|
|
%endif
|
|
pushd tools/thermal/tmon
|
|
%{tools_make} INSTALL_ROOT=%{buildroot} install
|
|
popd
|
|
pushd tools/bootconfig
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
pushd tools/iio
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
pushd tools/gpio
|
|
%{tools_make} DESTDIR=%{buildroot} install
|
|
popd
|
|
install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat
|
|
pushd tools/kvm/kvm_stat
|
|
%{__make} INSTALL_ROOT=%{buildroot} install-tools
|
|
%{__make} INSTALL_ROOT=%{buildroot} install-man
|
|
install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service
|
|
popd
|
|
# install VM tools
|
|
pushd tools/mm/
|
|
install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo
|
|
install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort
|
|
popd
|
|
pushd tools/verification/rv/
|
|
%{tools_make} DESTDIR=%{buildroot} STRIP=/bin/true install
|
|
popd
|
|
pushd tools/tracing/rtla/
|
|
%{tools_make} DESTDIR=%{buildroot} STRIP=/bin/true install
|
|
rm -f %{buildroot}%{_bindir}/hwnoise
|
|
rm -f %{buildroot}%{_bindir}/osnoise
|
|
rm -f %{buildroot}%{_bindir}/timerlat
|
|
(cd %{buildroot}
|
|
|
|
ln -sf rtla ./%{_bindir}/hwnoise
|
|
ln -sf rtla ./%{_bindir}/osnoise
|
|
ln -sf rtla ./%{_bindir}/timerlat
|
|
)
|
|
popd
|
|
%endif
|
|
|
|
%if %{with_selftests}
|
|
pushd samples
|
|
install -d %{buildroot}%{_libexecdir}/ksamples
|
|
# install bpf samples
|
|
pushd bpf
|
|
install -d %{buildroot}%{_libexecdir}/ksamples/bpf
|
|
find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \;
|
|
install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf
|
|
# test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the
|
|
# kernel tree. Just remove it.
|
|
rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh
|
|
install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true
|
|
install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf
|
|
popd
|
|
# install pktgen samples
|
|
pushd pktgen
|
|
install -d %{buildroot}%{_libexecdir}/ksamples/pktgen
|
|
find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
|
|
find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \;
|
|
popd
|
|
popd
|
|
# install mm selftests
|
|
pushd tools/testing/selftests/mm
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/mm/{} \;
|
|
popd
|
|
# install cgroup selftests
|
|
pushd tools/testing/selftests/cgroup
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cgroup/{} \;
|
|
popd
|
|
# install drivers/net/mlxsw selftests
|
|
pushd tools/testing/selftests/drivers/net/mlxsw
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \;
|
|
popd
|
|
# install drivers/net/netdevsim selftests
|
|
pushd tools/testing/selftests/drivers/net/netdevsim
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \;
|
|
popd
|
|
# install drivers/net/bonding selftests
|
|
pushd tools/testing/selftests/drivers/net/bonding
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/bonding/{} \;
|
|
popd
|
|
# install net/forwarding selftests
|
|
pushd tools/testing/selftests/net/forwarding
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \;
|
|
popd
|
|
# install net/hsr selftests
|
|
pushd tools/testing/selftests/net/hsr
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/hsr/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/hsr/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/hsr/{} \;
|
|
popd
|
|
# install net/mptcp selftests
|
|
pushd tools/testing/selftests/net/mptcp
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \;
|
|
popd
|
|
# install tc-testing selftests
|
|
pushd tools/testing/selftests/tc-testing
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \;
|
|
popd
|
|
# install livepatch selftests
|
|
pushd tools/testing/selftests/livepatch
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \;
|
|
popd
|
|
# install net/netfilter selftests
|
|
pushd tools/testing/selftests/net/netfilter
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/netfilter/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/netfilter/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/netfilter/{} \;
|
|
popd
|
|
|
|
# install memfd selftests
|
|
pushd tools/testing/selftests/memfd
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/memfd/{} \;
|
|
popd
|
|
# install iommu selftests
|
|
pushd tools/testing/selftests/iommu
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/iommu/{} \;
|
|
popd
|
|
# install cachestat selftests
|
|
pushd tools/testing/selftests/cachestat
|
|
find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
|
|
find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
|
|
find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/cachestat/{} \;
|
|
popd
|
|
%endif
|
|
|
|
###
|
|
### clean
|
|
###
|
|
|
|
###
|
|
### scripts
|
|
###
|
|
|
|
%if %{with_tools}
|
|
%post -n kernel-tools
|
|
%systemd_post cpupower.service
|
|
|
|
%preun -n kernel-tools
|
|
%systemd_preun cpupower.service
|
|
|
|
%postun -n kernel-tools
|
|
%systemd_postun cpupower.service
|
|
|
|
%post -n kernel-tools-libs
|
|
/sbin/ldconfig
|
|
|
|
%postun -n kernel-tools-libs
|
|
/sbin/ldconfig
|
|
%endif
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-devel package.
|
|
# %%kernel_devel_post [<subpackage>]
|
|
# Note we don't run hardlink if ostree is in use, as ostree is
|
|
# a far more sophisticated hardlink implementation.
|
|
# https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526
|
|
#
|
|
# The deletion of *.hardlink-temporary files is a temporary workaround
|
|
# for this bug in the hardlink binary (fixed in util-linux 2.38):
|
|
# https://github.com/util-linux/util-linux/issues/1602
|
|
#
|
|
%define kernel_devel_post() \
|
|
%{expand:%%post %{?1:%{1}-}devel}\
|
|
if [ -f /etc/sysconfig/kernel ]\
|
|
then\
|
|
. /etc/sysconfig/kernel || exit $?\
|
|
fi\
|
|
if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \
|
|
then\
|
|
(cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\
|
|
/usr/bin/find . -type f | while read f; do\
|
|
hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\
|
|
done;\
|
|
/usr/bin/find /usr/src/kernels -type f -name '*.hardlink-temporary' -delete\
|
|
)\
|
|
fi\
|
|
%if %{with_cross}\
|
|
echo "Building scripts and resolve_btfids"\
|
|
env --unset=ARCH make -C /usr/src/kernels/%{KVERREL}%{?1:+%{1}} prepare_after_cross\
|
|
%endif\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-modules-extra package.
|
|
# It also defines a %%postun script that does the same thing.
|
|
# %%kernel_modules_extra_post [<subpackage>]
|
|
#
|
|
%define kernel_modules_extra_post() \
|
|
%{expand:%%post %{?1:%{1}-}modules-extra}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}\
|
|
%{expand:%%postun %{?1:%{1}-}modules-extra}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-modules-internal package.
|
|
# It also defines a %%postun script that does the same thing.
|
|
# %%kernel_modules_internal_post [<subpackage>]
|
|
#
|
|
%define kernel_modules_internal_post() \
|
|
%{expand:%%post %{?1:%{1}-}modules-internal}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}\
|
|
%{expand:%%postun %{?1:%{1}-}modules-internal}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-modules-partner package.
|
|
# It also defines a %%postun script that does the same thing.
|
|
# %%kernel_modules_partner_post [<subpackage>]
|
|
#
|
|
%define kernel_modules_partner_post() \
|
|
%{expand:%%post %{?1:%{1}-}modules-partner}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}\
|
|
%{expand:%%postun %{?1:%{1}-}modules-partner}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-modules package.
|
|
# It also defines a %%postun script that does the same thing.
|
|
# %%kernel_modules_post [<subpackage>]
|
|
#
|
|
%define kernel_modules_post() \
|
|
%{expand:%%post %{?1:%{1}-}modules}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
if [ -f /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz ] &&\
|
|
[ -f /boot/initramfs-%{KVERREL}%{?1:+%{1}}.img ] &&\
|
|
[ ! -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?1:+%{1}} ]; then\
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
|
|
touch %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
|
|
fi\
|
|
%{nil}\
|
|
%{expand:%%postun %{?1:%{1}-}modules}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}\
|
|
%{expand:%%posttrans %{?1:%{1}-}modules}\
|
|
if [ -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}} ]; then\
|
|
rm -f %{_localstatedir}/lib/rpm-state/%{name}/need_to_run_dracut_%{KVERREL}%{?1:+%{1}}\
|
|
echo "Running: dracut -f --kver %{KVERREL}%{?1:+%{1}} /boot/initramfs-%{KVERREL}%{?1:+%{1}}.img"\
|
|
dracut -f --kver "%{KVERREL}%{?1:+%{1}}" /boot/initramfs-%{KVERREL}%{?1:+%{1}}.img || exit $?\
|
|
fi\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel*-modules-core package.
|
|
# %%kernel_modules_core_post [<subpackage>]
|
|
#
|
|
%define kernel_modules_core_post() \
|
|
%{expand:%%posttrans %{?1:%{1}-}modules-core}\
|
|
/sbin/depmod -a %{KVERREL}%{?1:+%{1}}\
|
|
%{nil}
|
|
|
|
# This macro defines a %%posttrans script for a kernel package.
|
|
# %%kernel_variant_posttrans [-v <subpackage>] [-u uki-suffix]
|
|
# More text can follow to go at the end of this variant's %%post.
|
|
#
|
|
%define kernel_variant_posttrans(v:u:) \
|
|
%{expand:%%posttrans %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
|
|
%if 0%{!?fedora:1}\
|
|
if [ -x %{_sbindir}/weak-modules ]\
|
|
then\
|
|
%{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
|
|
fi\
|
|
%endif\
|
|
rm -f %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
|
|
/bin/kernel-install add %{KVERREL}%{?-v:+%{-v*}} /lib/modules/%{KVERREL}%{?-v:+%{-v*}}/vmlinuz%{?-u:-%{-u*}.efi} || exit $?\
|
|
if [[ ! -e "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" ]]; then\
|
|
ln -s "/lib/modules/%{KVERREL}%{?-v:+%{-v*}}/symvers.gz" "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz"\
|
|
command -v restorecon &>/dev/null && restorecon "/boot/symvers-%{KVERREL}%{?-v:+%{-v*}}.gz" \
|
|
fi\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%post script for a kernel package and its devel package.
|
|
# %%kernel_variant_post [-v <subpackage>] [-r <replace>]
|
|
# More text can follow to go at the end of this variant's %%post.
|
|
#
|
|
%define kernel_variant_post(v:r:) \
|
|
%{expand:%%kernel_devel_post %{?-v*}}\
|
|
%{expand:%%kernel_modules_post %{?-v*}}\
|
|
%{expand:%%kernel_modules_core_post %{?-v*}}\
|
|
%{expand:%%kernel_modules_extra_post %{?-v*}}\
|
|
%{expand:%%kernel_modules_internal_post %{?-v*}}\
|
|
%if 0%{!?fedora:1}\
|
|
%{expand:%%kernel_modules_partner_post %{?-v*}}\
|
|
%endif\
|
|
%{expand:%%kernel_variant_posttrans %{?-v*:-v %{-v*}}}\
|
|
%{expand:%%post %{?-v*:%{-v*}-}core}\
|
|
%{-r:\
|
|
if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\
|
|
[ -f /etc/sysconfig/kernel ]; then\
|
|
/bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\
|
|
fi}\
|
|
mkdir -p %{_localstatedir}/lib/rpm-state/%{name}\
|
|
touch %{_localstatedir}/lib/rpm-state/%{name}/installing_core_%{KVERREL}%{?-v:+%{-v*}}\
|
|
%{nil}
|
|
|
|
#
|
|
# This macro defines a %%preun script for a kernel package.
|
|
# %%kernel_variant_preun [-v <subpackage>] -u [uki-suffix] -e
|
|
# Add kernel-install's --entry-type=type1|type2|all option (if supported) to limit removal
|
|
# to a specific boot entry type.
|
|
#
|
|
%define kernel_variant_preun(v:u:e) \
|
|
%{expand:%%preun %{?-v:%{-v*}-}%{!?-u*:core}%{?-u*:uki-%{-u*}}}\
|
|
entry_type=""\
|
|
%{-e: \
|
|
/bin/kernel-install --help|grep -q -- '--entry-type ' &&\
|
|
entry_type="--entry-type %{!?-u:type1}%{?-u:type2}" \
|
|
}\
|
|
/bin/kernel-install remove %{KVERREL}%{?-v:+%{-v*}} $entry_type || exit $?\
|
|
if [ -x %{_sbindir}/weak-modules ]\
|
|
then\
|
|
%{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?-v:+%{-v*}} || exit $?\
|
|
fi\
|
|
%{nil}
|
|
|
|
%if %{efiuki}
|
|
%kernel_variant_posttrans -u virt
|
|
%kernel_variant_preun -u virt -e
|
|
%endif
|
|
|
|
%kernel_variant_preun -e
|
|
%kernel_variant_post -r kernel-smp
|
|
|
|
%if %{with_pae}
|
|
%kernel_variant_preun -v lpae
|
|
%kernel_variant_post -v lpae -r (kernel|kernel-smp)
|
|
%endif
|
|
|
|
%if %{with_zfcpdump}
|
|
%kernel_variant_preun -v zfcpdump
|
|
%kernel_variant_post -v zfcpdump
|
|
%endif
|
|
|
|
%if %{with_arm64_64k}
|
|
%kernel_variant_preun -v 64k
|
|
%kernel_variant_post -v 64k
|
|
%endif
|
|
|
|
%if %{with_debug} && %{with_arm64_64k}
|
|
%kernel_variant_preun -v 64k-debug
|
|
%kernel_variant_post -v 64k-debug
|
|
%endif
|
|
|
|
%if %{with_realtime}
|
|
%kernel_variant_preun -v rt
|
|
%kernel_variant_post -v rt
|
|
%endif
|
|
|
|
%if %{with_debug} && %{with_realtime}
|
|
%kernel_variant_preun -v rt-debug
|
|
%kernel_variant_post -v rt-debug
|
|
%endif
|
|
|
|
%if %{with_realtime_arm64_64k}
|
|
%kernel_variant_preun -v rt-64k
|
|
%kernel_variant_post -v rt-64k
|
|
%endif
|
|
|
|
%if %{with_debug} && %{with_realtime_arm64_64k}
|
|
%kernel_variant_preun -v rt-64k-debug
|
|
%kernel_variant_post -v rt-64k-debug
|
|
%endif
|
|
|
|
%if %{with_debug}
|
|
%if %{efiuki}
|
|
%kernel_variant_posttrans -v debug -u virt
|
|
%kernel_variant_preun -v debug -u virt -e
|
|
%endif
|
|
%kernel_variant_preun -v debug -e
|
|
%kernel_variant_post -v debug
|
|
%endif
|
|
|
|
if [ -x /sbin/ldconfig ]
|
|
then
|
|
/sbin/ldconfig -X || exit $?
|
|
fi
|
|
|
|
###
|
|
### file lists
|
|
###
|
|
|
|
%if %{with_headers}
|
|
%files headers
|
|
/usr/include/*
|
|
%exclude %{_includedir}/cpufreq.h
|
|
%exclude %{_includedir}/internal/
|
|
%exclude %{_includedir}/perf/
|
|
%endif
|
|
|
|
%if %{with_cross_headers}
|
|
%files cross-headers
|
|
/usr/*-linux-gnu/include/*
|
|
%endif
|
|
|
|
%if %{with_kernel_abi_stablelists}
|
|
%files -n kernel-abi-stablelists
|
|
/lib/modules/kabi-*
|
|
%endif
|
|
|
|
%if %{with_kabidw_base}
|
|
%ifarch x86_64 s390x ppc64 ppc64le aarch64
|
|
%files kernel-kabidw-base-internal
|
|
%defattr(-,root,root)
|
|
/kabidw-base/%{_target_cpu}/*
|
|
%endif
|
|
%endif
|
|
|
|
# only some architecture builds need kernel-doc
|
|
%if %{with_doc}
|
|
%files doc
|
|
%defattr(-,root,root)
|
|
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation/*
|
|
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/Documentation
|
|
%dir %{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}
|
|
%{_datadir}/doc/kernel-doc-%{specversion}-%{pkgrelease}/kernel.changelog.xz
|
|
%endif
|
|
|
|
%if %{with_perf}
|
|
%files -n perf
|
|
%{_bindir}/perf
|
|
%{_libdir}/libperf-jvmti.so
|
|
%dir %{_libexecdir}/perf-core
|
|
%{_libexecdir}/perf-core/*
|
|
%{_datadir}/perf-core/*
|
|
%{_mandir}/man[1-8]/perf*
|
|
%{_sysconfdir}/bash_completion.d/perf
|
|
%doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt
|
|
%{_docdir}/perf-tip/tips.txt
|
|
|
|
%files -n python3-perf
|
|
%{python3_sitearch}/*
|
|
|
|
%files -n libperf
|
|
%{_libdir}/libperf.so.0
|
|
%{_libdir}/libperf.so.0.0.1
|
|
|
|
%files -n libperf-devel
|
|
%{_libdir}/libperf.so
|
|
%{_libdir}/pkgconfig/libperf.pc
|
|
%{_includedir}/perf/
|
|
%{_includedir}/internal/
|
|
%{_mandir}/man3/libperf.*
|
|
%{_mandir}/man7/libperf-counting.*
|
|
%{_mandir}/man7/libperf-sampling.*
|
|
%{_docdir}/libperf/
|
|
|
|
%if %{with_debuginfo}
|
|
%files -f perf-debuginfo.list -n perf-debuginfo
|
|
|
|
%files -f python3-perf-debuginfo.list -n python3-perf-debuginfo
|
|
|
|
%files -f libperf-debuginfo.list -n libperf-debuginfo
|
|
%endif
|
|
# with_perf
|
|
%endif
|
|
|
|
%if %{with_tools}
|
|
%ifnarch %{cpupowerarchs}
|
|
%files -n kernel-tools
|
|
%else
|
|
%files -n kernel-tools -f cpupower.lang
|
|
%{_bindir}/cpupower
|
|
%{_datadir}/bash-completion/completions/cpupower
|
|
%ifarch x86_64
|
|
%{_bindir}/centrino-decode
|
|
%{_bindir}/powernow-k8-decode
|
|
%endif
|
|
%{_unitdir}/cpupower.service
|
|
%{_mandir}/man[1-8]/cpupower*
|
|
%config(noreplace) %{_sysconfdir}/sysconfig/cpupower
|
|
%ifarch x86_64
|
|
%{_bindir}/x86_energy_perf_policy
|
|
%{_mandir}/man8/x86_energy_perf_policy*
|
|
%{_bindir}/turbostat
|
|
%{_mandir}/man8/turbostat*
|
|
%{_bindir}/intel-speed-select
|
|
%{_sbindir}/intel_sdsi
|
|
%endif
|
|
# cpupowerarchs
|
|
%endif
|
|
%{_bindir}/tmon
|
|
%{_bindir}/bootconfig
|
|
%{_bindir}/iio_event_monitor
|
|
%{_bindir}/iio_generic_buffer
|
|
%{_bindir}/lsiio
|
|
%{_bindir}/lsgpio
|
|
%{_bindir}/gpio-hammer
|
|
%{_bindir}/gpio-event-mon
|
|
%{_bindir}/gpio-watch
|
|
%{_mandir}/man1/kvm_stat*
|
|
%{_bindir}/kvm_stat
|
|
%{_unitdir}/kvm_stat.service
|
|
%config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat
|
|
%{_bindir}/page_owner_sort
|
|
%{_bindir}/slabinfo
|
|
|
|
%if %{with_debuginfo}
|
|
%files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo
|
|
%endif
|
|
|
|
%ifarch %{cpupowerarchs}
|
|
%files -n kernel-tools-libs
|
|
%{_libdir}/libcpupower.so.1
|
|
%{_libdir}/libcpupower.so.0.0.1
|
|
|
|
%files -n kernel-tools-libs-devel
|
|
%{_libdir}/libcpupower.so
|
|
%{_includedir}/cpufreq.h
|
|
%endif
|
|
|
|
%files -n rtla
|
|
%{_bindir}/rtla
|
|
%{_bindir}/hwnoise
|
|
%{_bindir}/osnoise
|
|
%{_bindir}/timerlat
|
|
%{_mandir}/man1/rtla-hwnoise.1.gz
|
|
%{_mandir}/man1/rtla-osnoise-hist.1.gz
|
|
%{_mandir}/man1/rtla-osnoise-top.1.gz
|
|
%{_mandir}/man1/rtla-osnoise.1.gz
|
|
%{_mandir}/man1/rtla-timerlat-hist.1.gz
|
|
%{_mandir}/man1/rtla-timerlat-top.1.gz
|
|
%{_mandir}/man1/rtla-timerlat.1.gz
|
|
%{_mandir}/man1/rtla.1.gz
|
|
|
|
%if %{with_debuginfo}
|
|
%files -f rtla-debuginfo.list -n rtla-debuginfo
|
|
%endif
|
|
|
|
%files -n rv
|
|
%{_bindir}/rv
|
|
%{_mandir}/man1/rv-list.1.gz
|
|
%{_mandir}/man1/rv-mon-wip.1.gz
|
|
%{_mandir}/man1/rv-mon-wwnr.1.gz
|
|
%{_mandir}/man1/rv-mon.1.gz
|
|
%{_mandir}/man1/rv-mon-sched.1.gz
|
|
%{_mandir}/man1/rv.1.gz
|
|
|
|
%if %{with_debuginfo}
|
|
%files -f rv-debuginfo.list -n rv-debuginfo
|
|
%endif
|
|
|
|
# with_tools
|
|
%endif
|
|
|
|
%if %{with_selftests}
|
|
%files selftests-internal
|
|
%{_libexecdir}/ksamples
|
|
%{_libexecdir}/kselftests
|
|
%endif
|
|
|
|
# empty meta-package
|
|
%if %{with_up}
|
|
%ifnarch %nobuildarches noarch
|
|
%files
|
|
%endif
|
|
%endif
|
|
|
|
# This is %%{image_install_path} on an arch where that includes ELF files,
|
|
# or empty otherwise.
|
|
%define elf_image_install_path %{?kernel_image_elf:%{image_install_path}}
|
|
|
|
#
|
|
# This macro defines the %%files sections for a kernel package
|
|
# and its devel and debuginfo packages.
|
|
# %%kernel_variant_files [-k vmlinux] <use_vdso> <condition> <subpackage>
|
|
#
|
|
%define kernel_variant_files(k:) \
|
|
%if %{2}\
|
|
%{expand:%%files %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\
|
|
%{!?_licensedir:%global license %%doc}\
|
|
%%license linux-%{KVERREL}/COPYING-%{version}-%{release}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\
|
|
%ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \
|
|
%ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \
|
|
%ifarch %{arm} aarch64\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \
|
|
%ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \
|
|
%endif\
|
|
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
|
|
%ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\
|
|
%dir /lib/modules\
|
|
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
|
|
%ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\
|
|
%ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\
|
|
%ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\
|
|
%{expand:%%files -f kernel-%{?3:%{3}-}modules-core.list %{?3:%{3}-}modules-core}\
|
|
%dir /lib/modules\
|
|
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
|
|
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/build\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/source\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/updates\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/systemtap\
|
|
%{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\
|
|
%if %{1}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\
|
|
%endif\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.block\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.drm\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.modesetting\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.networking\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.order\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.alias.bin\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.alias.bin\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin.bin\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.dep.bin\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.devname\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.softdep\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols\
|
|
%ghost %attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.symbols.bin\
|
|
%{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\
|
|
%{expand:%%files %{?3:%{3}-}devel}\
|
|
%defverify(not mtime)\
|
|
/usr/src/kernels/%{KVERREL}%{?3:+%{3}}\
|
|
%{expand:%%files %{?3:%{3}-}devel-matched}\
|
|
%{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\
|
|
%config(noreplace) /etc/modprobe.d/*-blacklist.conf\
|
|
%{expand:%%files %{?3:%{3}-}modules-internal}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/internal\
|
|
%if 0%{!?fedora:1}\
|
|
%{expand:%%files %{?3:%{3}-}modules-partner}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/partner\
|
|
%endif\
|
|
%if %{with_debuginfo}\
|
|
%ifnarch noarch\
|
|
%{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\
|
|
%endif\
|
|
%endif\
|
|
%if %{efiuki}\
|
|
%if "%{3}" != "rt" && "%{3}" != "rt-debug" && "%{3}" != "rt-64k" && "%{3}" != "rt-64k-debug"\
|
|
%{expand:%%files %{?3:%{3}-}uki-virt}\
|
|
%dir /lib/modules\
|
|
%dir /lib/modules/%{KVERREL}%{?3:+%{3}}\
|
|
%attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/config\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/modules.builtin*\
|
|
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi\
|
|
%attr(0644, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/.%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.hmac\
|
|
%ghost /%{image_install_path}/efi/EFI/Linux/%{?-k:%{-k*}}%{!?-k:*}-%{KVERREL}%{?3:+%{3}}.efi\
|
|
%{expand:%%files %{?3:%{3}-}uki-virt-addons}\
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/ \
|
|
/lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-virt.efi.extra.d/*.addon.efi\
|
|
%endif\
|
|
%endif\
|
|
%if %{?3:1} %{!?3:0}\
|
|
%{expand:%%files %{3}}\
|
|
%endif\
|
|
%if %{with_gcov}\
|
|
%ifnarch %nobuildarches noarch\
|
|
%{expand:%%files -f kernel-%{?3:%{3}-}gcov.list %{?3:%{3}-}gcov}\
|
|
%endif\
|
|
%endif\
|
|
%endif\
|
|
%{nil}
|
|
|
|
%kernel_variant_files %{_use_vdso} %{with_up}
|
|
%kernel_variant_files %{_use_vdso} %{with_debug} debug
|
|
%if %{with_arm64_64k}
|
|
%kernel_variant_files %{_use_vdso} %{with_debug} 64k-debug
|
|
%endif
|
|
%kernel_variant_files %{_use_vdso} %{with_realtime} rt
|
|
%if %{with_realtime}
|
|
%kernel_variant_files %{_use_vdso} %{with_debug} rt-debug
|
|
%endif
|
|
%if %{with_realtime_arm64_64k}
|
|
%kernel_variant_files %{_use_vdso} %{with_debug} rt-64k-debug
|
|
%endif
|
|
%if %{with_debug_meta}
|
|
%files debug
|
|
%files debug-core
|
|
%files debug-devel
|
|
%files debug-devel-matched
|
|
%files debug-modules
|
|
%files debug-modules-core
|
|
%files debug-modules-extra
|
|
%if %{with_arm64_64k}
|
|
%files 64k-debug
|
|
%files 64k-debug-core
|
|
%files 64k-debug-devel
|
|
%files 64k-debug-devel-matched
|
|
%files 64k-debug-modules
|
|
%files 64k-debug-modules-extra
|
|
%endif
|
|
%endif
|
|
%kernel_variant_files %{use_vdso} %{with_pae} lpae
|
|
%kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump
|
|
%kernel_variant_files %{_use_vdso} %{with_arm64_64k} 64k
|
|
%kernel_variant_files %{_use_vdso} %{with_realtime_arm64_64k} rt-64k
|
|
|
|
# plz don't put in a version string unless you're going to tag
|
|
# and build.
|
|
#
|
|
#
|
|
%changelog
|
|
* Wed Jun 03 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-713.el9]
|
|
- rbd: eliminate a race in lock_dwork draining on unmap (CKI Backport Bot) [RHEL-180190]
|
|
- init/Kconfig: remove CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND (Waiman Long) [RHEL-166727]
|
|
- update workarounds for gcc "asm goto" issue (Waiman Long) [RHEL-166727]
|
|
- init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash (Waiman Long) [RHEL-166727]
|
|
- work around gcc bugs with 'asm goto' with outputs (Waiman Long) [RHEL-166727]
|
|
- compiler-gcc.h: remove ancient workaround for gcc PR 58670 (Waiman Long) [RHEL-166727]
|
|
- powerpc/64: Force inlining of prevent_user_access() and set_kuap() (Waiman Long) [RHEL-166727]
|
|
|
|
* Tue Jun 02 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-712.el9]
|
|
- selftests/x86: fix Makefile dependencies to work with clang (David Arcari) [RHEL-115163]
|
|
- selftests/x86/apx: Add APX test (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Fix spelling mistake "hader" -> "header" (David Arcari) [RHEL-115163]
|
|
- selftests/x86/avx: Add AVX tests (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Clarify supported xstates (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Consolidate test invocations into a single entry (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Introduce signal ABI test (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Refactor ptrace ABI test (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Refactor context switching test (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Enumerate and name xstate components (David Arcari) [RHEL-115163]
|
|
- selftests/x86/xstate: Refactor XSAVE helpers for general use (David Arcari) [RHEL-115163]
|
|
- selftests/x86: Consolidate redundant signal helper functions (David Arcari) [RHEL-115163]
|
|
- selftests/x86: Fix error: variably modified 'altstack_data' at file scope (David Arcari) [RHEL-115163]
|
|
- selftests/x86: remove (or use) unused variables and functions (David Arcari) [RHEL-115163]
|
|
- x86/selftests: Skip the tests if prerequisites aren't fulfilled (David Arcari) [RHEL-115163]
|
|
- selftests/x86/amx: Add a ptrace test (David Arcari) [RHEL-115163]
|
|
- selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test (David Arcari) [RHEL-115163]
|
|
- x86/fpu: Rename fpu_reset_fpregs() to fpu_reset_fpstate_regs() (David Arcari) [RHEL-115163]
|
|
- x86/fpu: Remove export of mxcsr_feature_mask (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Simplify PKRU update in signal frame (David Arcari) [RHEL-115163]
|
|
- x86/fpu: Refactor xfeature bitmask update code for sigframe XSAVE (David Arcari) [RHEL-115163]
|
|
- x86/fpu: Log XSAVE disablement consistently (David Arcari) [RHEL-115163]
|
|
- x86/fpu/apx: Enable APX state support (David Arcari) [RHEL-115163]
|
|
- x86/fpu/apx: Disallow conflicting MPX presence (David Arcari) [RHEL-115163]
|
|
- x86/fpu/apx: Define APX state component (David Arcari) [RHEL-115163]
|
|
- x86/cpufeatures: Add X86_FEATURE_APX (David Arcari) [RHEL-115163]
|
|
- x86/fpu/xstate: Adjust xstate copying logic for user ABI (David Arcari) [RHEL-115163]
|
|
- x86/fpu/xstate: Adjust XSAVE buffer size calculation (David Arcari) [RHEL-115163]
|
|
- x86/fpu/xstate: Introduce xfeature order table and accessor macro (David Arcari) [RHEL-115163]
|
|
- x86/fpu/xstate: Remove xstate offset check (David Arcari) [RHEL-115163]
|
|
- x86/fpu/xstate: Simplify print_xstate_features() (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Ensure updated PKRU value is XRSTOR'd (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Change caller of update_pkru_in_sigframe() (David Arcari) [RHEL-115163]
|
|
- x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Update PKRU to enable all pkeys before XSAVE (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Add helper functions to update PKRU on the sigframe (David Arcari) [RHEL-115163]
|
|
- x86/pkeys: Add PKRU as a parameter in signal handling functions (David Arcari) [RHEL-115163]
|
|
- Subject: net/iucv: Add missing kernel-doc return value descriptions (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/qeth: Handle ambiguous OSA RCs in s390dbf (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/qeth: Move all OSA RCs to single enum (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/ctcm: Fix double-kfree (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/ctcm: Use info level for handshake UC_RCRESET (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/iucv: Convert sprintf/snprintf to scnprintf (Ramesh Chhetri) [RHEL-136141]
|
|
- s390/ap: Restrict driver_override versus apmask and aqmask use (Ramesh Chhetri) [RHEL-113460]
|
|
- s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex (Ramesh Chhetri) [RHEL-113460]
|
|
- Subject: s390/ap: Support driver_override for AP queue devices (Ramesh Chhetri) [RHEL-113460]
|
|
- s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks (Ramesh Chhetri) [RHEL-113460]
|
|
- ALSA: update RHEL kconfigs for 7.0 upstream code (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Fix Kconfig dependencies for SND_SOC_ACPI_AMD_SDCA_QUIRKS (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: NVL-S: add platform name (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: NVL: add platform name (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: fix the warning 'rae_fw' from request_firmware() not released (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: do not use 'acquire' PM API (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2781: update i2c ops to match older API (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: additional fixes for move struct snd_soc_dapm_context (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/tas2781: Fix sound abnormal issue on some SPI device (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Evaluate packsize caps at the right place (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Correct kernel doc for sdca_irq_cleanup() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: update DMI quirk and add ACP DMIC for Lenovo platforms (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Unregister IRQ handlers on module remove (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: mask Function_Status value (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Fix overwritten var within for loop (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: modify period size constraints for ACE4 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/intel: enforce stricter period-size alignment for Intel NVL (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8325: Add software reset during probe (Jaroslav Kysela) [RHEL-168091]
|
|
- Revert "ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone" (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: avs: Fix memory leak in avs_register_i2s_test_boards() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: fix iteration in is_endpoint_present() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: Fix endpoint index if endpoints are missing (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Fix errors in IRQ cleanup (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: add Lenovo P16s G5 AMD quirk for legacy SDW machine (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: audioreach: explicitly enable speaker protection modules (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IAH10 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: ps: Fix missing leading zeros in subsystem_device SSID log (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Exclude Scarlett 2i2 1st Gen (8016) from SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for Acer Swift SFG14-73 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IMH9 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: boards: fix unmet dependency on PINCTRL (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: ehl_rt5660: Use the correct rtd->dev device in hw_params (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Lenovo Yoga Slim 7 14AKP10 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for HP Laptop 15-fc0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: ep93xx: Fix unchecked clk_prepare_enable() and add rollback on failure (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-core: call missing INIT_LIST_HEAD() for card_aux_list (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Samsung Book2 Pro 360 (NP950QED) (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI entry for HP Laptop 15-fc0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 16X OLED M7601RM (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for ASUS ROG Strix SCAR 15 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Exclude Scarlett Solo 1st Gen from SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: caiaq: fix stack out-of-bounds read in init_card (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: ctxfi: Check the error for index mapping (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: ctxfi: Fix missing SPDIFI1 index handling (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for HP Victus 15-fb0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/intel: Add MSI X870E Tomahawk to denylist by DMI ID (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for Framework F111:000F (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Fix quirk flags for NeuralDSP Quad Cortex (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: change quirk for HP OmniBook 7 Laptop 16-bh0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- Revert "ALSA: hda/intel: Add MSI X870E Tomahawk to denylist" (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add iface reset and delay quirk for AB17X USB Audio (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add HP Laptop 15-fd0xxx mute LED quirk (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Exclude Scarlett 2i4 1st Gen from SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add mute LED quirk for HP Pavilion 15-eg0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek - Fixed Speaker Mute LED for HP EliteBoard G1a platform (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-topology: Allow bytes controls without initial payload (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: adau1372: Fix clock leak on PLL lock failure (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: adau1372: Fix unchecked clk_prepare_enable() return value (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: fix finding wrong entity (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: remove the max count of initialization table (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: wcd934x: fix typo in dt parsing (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Fix the device initialization (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: add ASUS HN7306EA quirk for legacy SDW machine (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: topology: reject invalid vendor array size in token parser (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2781: Add null check for calibration data (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: asihpi: avoid write overflow check warning (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: fsl: imx-card: initialize playback_only and capture_only (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: simple-card-utils: Check value of is_playback_only and is_capture_only (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: qcom: Fix the license marking (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA:usb:qcom: add AUXILIARY_BUS to Kconfig dependencies (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Exclude Scarlett 2i2 1st Gen from SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI quirk for Thin A15 B7VF (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK BM1403CDA (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: firewire-lib: fix uninitialized local variable (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for ASUS Strix G16 G615JMR (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Sequence GPIO2 on Star Labs StarFighter (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: add PX13 SoundWire machine link for rt721+tas2783x2 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: add DMI override for ACP70 flag (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sma1307: fix double free of devm_kzalloc() memory (Jaroslav Kysela) [RHEL-168091] {CVE-2026-31475}
|
|
- ALSA: hda/realtek: Add HP ENVY Laptop 13-ba0xxx quirk (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for ASUS ROG Flow Z13-KJP GZ302EAC (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for Lenovo Yoga 7 2-in-1 16AKP10 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp-mach-common: Add missing error check for clock acquisition (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: detect empty DMI strings (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add iface reset and delay quirk for SPACETOUCH USB Audio (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: simple-card-utils: fix graph_util_is_ports0() for DT overlays (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-core: flush delayed work before removing DAIs and widgets (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-core: drop delayed_work_pending() check before flush (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tegra: Add support for Tegra238 soundcard (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add headset jack quirk for Thinkpad X390 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add HP Laptop 14s-dr5xxx mute LED quirk (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for ASUS UM6702RC (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: qdsp6: Fix q6apm remove ordering during ADSP stop and start (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: us122l: drop redundant interface references (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK PM1503CDA (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/senary: Ensure EAPD is enabled during init (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/senary: Use codec->core.afg for GPIO access (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: doc: usb-audio: Add doc for QUIRK_FLAG_SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: tegra: Add compatible for Tegra238 sound card (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/hdmi: Add Tegra238 HDA codec device ID (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: Suppress pointless warning about number of GPIO pulls (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Add ACP6.3 match entries for Cirrus Logic parts (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCD SKU (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1321: fix DMIC ch2/3 mask issue (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: Only patch ASP registers if the DAI is part of a DAIlink (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: firewire: dice: Fix printf warning with W=1 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for HP Pavilion 15-eh1xxx to enable mute LED (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/ca0132: Set HP/Speaker auto-detect default from headphone pin verb (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Fix comments for sdca_irq_request() (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: us144mkii: Drop kernel-doc markers (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Drop superfluous kernel-doc markers (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb: qcom: Correct parameter comment for uaudio_transfer_buffer_setup() (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda: cs35l56: Fix signedness error in cs35l56_hda_posture_put() (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Use correct version for UAC3 header validation (Jaroslav Kysela) [RHEL-168091] {CVE-2026-23318}
|
|
- ALSA: hda/realtek: add quirk for Acer Nitro ANV15-51 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/intel: increase default bdl_pos_adj for Nvidia controllers (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Check max frame size for implicit feedback mode, too (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Avoid implicit feedback mode on DIYINHK USB Audio 2.0 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Use inclusive terms (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Cap the packet size pre-calculations (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add ASUS EXPERTBOOK BM1503CDA to quirk table (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs42l43: Report insert for exotic peripherals (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Skip clock selector for Focusrite devices (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Improve Focusrite sample rate filtering (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Remove VALIDATE_RATES quirk for Focusrite devices (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add quirk for Samsung Galaxy Book Flex (NT950QCT-A38A) (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: fix model name typo for Samsung Galaxy Book Flex (NT950QCG-X716) (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Acer Aspire V3-572G (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: scarlett2: Fix DSP filter control array handling (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Fix speaker pop on Star Labs StarFighter (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: echoaudio: Add SPDX ids to some files (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: isa: Add SPDX id lines to some files (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: core: Add SPDX license id to files (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: add explicit port prepare handling (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: sm8250: Add quinary MI2S support (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Avoid potentially repeated XRUN error messages (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add sanity check for OOB writes at silencing (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Update the number of packets properly at receiving (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: aw88261: Fix erroneous bitmask logic in Awinic init (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add iface reset and delay quirk for GHW-123P (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/tas2781: Ignore reset check for SPI device (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Samsung Galaxy Book3 Pro 360 (NP965QFG) (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Gigabyte G5 KF5 (2023) (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt721-sdca: Fix issue of fail to detect OMTP jack type (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add DSD support for iBasso DC04U (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: mixer: oss: Add card disconnect checkpoints (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102) (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/generic: fix typos in comments (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/conexant: Add quirk for HP ZBook Studio G4 (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: oss: delete self assignment (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56-test: Fix missing module namespace import (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56-shared: KUnit tests for onchip speaker ID gpios (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: Support for reading speaker ID from on-chip GPIOs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Limit values user can write to Selected Mode (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add regmap defaults for specification defined values (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Rearrange FDL file messages (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Still process most of the jack detect if control is missing (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Handle volatile controls correctly (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Remove outdated todo comment (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2781: Put three different calibrated data solution into the same data structure (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX952 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: fsl_rpmsg: Add compatible string for i.MX94 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: Add a virtual CPU DAI (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: Fix NULL pointer dereference (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: sof-audio: Add support for loopback capture (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: sof-audio: Traverse paths with aggregated DAI widgets (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-topology: Add support for process modules with no input pins (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-topology: Add new tokens for pipeline direction (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: sof_sdw: Add a DAI link for loopback capture (Jaroslav Kysela) [RHEL-168091]
|
|
- uapi: sound: sof: tokens: Add missing token for KCPS (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: pcm: Split up widget prepare and setup (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: sof-audio: Add a new op in struct sof_ipc_tplg_ops (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: Add quirk for Minisforum V3 SE (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: add SDCA property check (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: allow module parameter override BT link to 0 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: soc-acpi-intel-ptl-match: drop rt721 related match tables (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda-sdw-bpt: support simultaneous audio and BPT streams (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: add hda_dma_prepare/cleanup helpers (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: add hda_dsp_stream_pair_get/put helpers (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: wcd-mbhc-v2: remove unnecessary module_init/exit functions (Jaroslav Kysela) [RHEL-168091]
|
|
- docs: fix 're-use' -> 'reuse' in documentation (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Add ACP7.0 match entries for Cirrus Logic parts (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Sort Cirrus Logic match entries (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Rename Cirrus Logic component match entries to include link and uid (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: Sort match table into most specific first (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Add error unwind in resume (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Use cached regmap on resume (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Check errors in set_dai_fmt() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Propagate errors in set_bias_level() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Fix DAC deemphasis control handling (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: aw87390: Add Anbernic RG-DS amp driver (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: aw87390: Add Anbernic RG-DS Amplifier (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: max98390: Check return value of devm_gpiod_get_optional() in max98390_i2c_probe() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sdca: Fix missing regmap dependencies in Kconfig (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-core: add lockdep_assert_held() at snd_soc_unregister_dai() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tegra: set reg_default_cb callback (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tegra: Add AHUB writeable_reg for RX holes (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: wm8962: add .set_tdm_slot callback function (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sun4i-spdif: Add missing check for devm_regmap_init_mmio (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: add mixer support for Focusrite Forte (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: fix LG Gram Style 14 speakers (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: jack: Improve string handling in jack_kctl_name_gen (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/tas2781: Add tas2781_hda::catlog_id init (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/conexant: Add headset mic fix for MECHREVO Wujie 15X Pro (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: fsl,mqs: make gpr optional for SM-based SoCs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: wm8731: Remove unnecessary NULL check before clk_prepare_enable/clk_disable_unprepare (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: rt1320-sdw: Refactor to reduce stack frames (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sdw_utils: Add quirk to ignore RT722 DMIC DAI (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: tidyup function naming (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: move struct snd_soc_dapm_context (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: add snd_soc_dapm_alloc() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: remove dev from snd_soc_dapm_context() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-dapm: remove compatibility definition for dapm (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-component: remove compatibility definition for component (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-component: remove snd_soc_component_xxx() wrapper (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tlv320adcx140: don't use snd_soc_component_get_bias_level() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: rt56*: Remove IRQF_ONESHOT (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/tas2781: Drop the unused macro definition (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add NO_DIRECT_COMPLETE flag to class driver (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: Add KUnit testing of cs35l56_set_fw_suffix() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs-amp-lib: Add a Kconfig symbol for enabling test hooks (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs-amp-lib-test: Tests for reading SSIDExV2 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs35l56: Use vendor-specific qualifier in firmware file search (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs-amp-lib: Support Dell SSIDExV2 UEFI variable (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda: controllers: intel: add support for Nova Lake (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda: core: intel-dsp-config: Add support for NVL (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: add support for Nova Lake NVL (Jaroslav Kysela) [RHEL-168091]
|
|
- PCI: Add Intel Nova Lake audio Device ID (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: Remove MODULE_SOFTDEP for snd-hda-codec-hdmi (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: fw loading for devices without pci bus (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sdw_utils: remove dai registered check (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: realtek: fix misspelling of "minimum" in comments (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-acpi-intel-ptl-match: use aggregated endpoint in ptl_rt722_l0_rt1320_l23 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: soc-acpi-intel-arl-match: change rt722 amp endpoint to aggregated (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/cirrus_scodec_test: Use faux_device instead of platform_device (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Handle CONFIG_PM_SLEEP not being set (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Propagate error codes from regmap updates (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Tidy up some memory allocations (Jaroslav Kysela) [RHEL-168091]
|
|
- dt-bindings: sound: google,goldfish-audio: Convert to DT schema (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: intel: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add lock to serialise the Function initialisation (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Device boot into the system suspend process (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add basic system suspend support (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add SDCA IRQ enable/disable helpers (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: aw88261: use dvdd-supply regulator (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: document dvdd-supply property for awinic,aw88261 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tlv320adcx140: add channel sum control (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tlv320adcx140: add kcontrol for num biquads (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: add avdd and iovdd supply (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: clarify areg-supply documentation (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tlv320adcx140: add avdd and iovdd supply (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tlv320adcx140: power on/off the device on demand (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: clean up presonus s1810 consts (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: presonus s18xx uses little-endian (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/realtek: add HP Victus 16-e0xxx mute LED quirk (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/cs8409: Add quirk for CDB35L56-FOUR-HD (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp: soc-acpi: add is_device_rt712_vb() helper (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: drop unused Kconfig symbols (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: pxa: drop unused Kconfig symbol (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: rtq9128: Add compatible changes for rtq9154 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: rtq9128: Add rtq9154 backward compatible (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: rtq9128: Modify the chip initial setting (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: wm8962: Don't report a microphone if it's shorted to ground on plug (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: wm8962: Add WM8962_ADC_MONOMIX to "3D Coefficients" mask (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sof ipc4: Add sof_ipc4_widget_setup_msg_payload() and call it (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4: sof_ipc4_module_init_ext_init structs and macros (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sof: ipc4-topology: Add topology tokens domain_in stack & heap_bytes (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sof: Add domain_id, heap_bytes and stack_bytes to snd_sof_widget (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc/ops: Use guard() for spinlocks (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: Use guard() for spinlocks where it makes sense (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: imx: imx-common: Use guard() for spinlock_irqsafe() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: amd: acp-ipc: Use guard() for spinlock_irq() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Use guard()/scoped_guard() for mutex locks where it makes sense (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: Use guard()/scoped_guard() for mutex locks where it makes sense (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: rt1320-sdw: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: dt-bindings: Convert realtek,rt5651 to DT schema (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: aw88261: Add devicetree support (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: aw88261: Remove AW88261_I2C_NAME macro (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: da7213: Move comma operator at the end of the line (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda - fix function names & missing function parameter (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: pcm: Revert bufs move in snd_pcm_xfern_frames_ioctl() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Replace use of system_wq with system_dfl_wq (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Sort #include directives (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Drop unneeded braces in nau8821_hw_params() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Simplify conditional in nau8821_get_osr() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Drop superfluous return statement (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Cancel delayed work on component remove (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Cancel pending work before suspend (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: nau8821: Fixup nau8821_enable_jack_detect() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: es8328: Remove duplicate DAPM routes (Jaroslav Kysela) [RHEL-168091]
|
|
- firmware: cs_dsp: Handle long-offset data blocks (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: echoaudio: adjust function name (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: ice1724: adjust function name reference (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: mixart: adjust field name reference (Jaroslav Kysela) [RHEL-168091]
|
|
- soundwire: intel_ace2x: add SND_HDA_CORE dependency (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: fix the remainder calculation of r0 value (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: alc5623: tidyup clock inversion in alc5623_set_dai_fmt() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: fix size_t format string (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: fix 32-bit link failure (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: avs: replace strcmp with sysfs_streq (Jaroslav Kysela) [RHEL-168091]
|
|
- soundwire: Use bus methods for .probe(), .remove() and .shutdown() (Jaroslav Kysela) [RHEL-168091]
|
|
- soundwire: Make remove function return no value (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: fix the warning the string may be truncated (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: Fix retry checking in rt1320_rae_load() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: Change return type of rt1320_t0_load() to void (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: audioreach: Constify function arguments (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: topology: Constify pointed snd_soc_tplg_dapm_widget (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: topology: Constify pointed DAPM widget structs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: topology: Constify pointed ar control structs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: topology: Constify pointed topology and vendor structs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add ASoC jack hookup in class driver (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Add ability to connect SDCA jacks to ASoC jacks (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Factor out jack handling into new c file (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda/cm9825: Add GENE_TWL7 support for AAEON (Jaroslav Kysela) [RHEL-168091]
|
|
- soc: qcom: apr: Use typedef for GPR callback member (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: Constify APR/GPR result structs (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: Constify GPR callback response data (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: Constify APR callback response data (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: wcd939x-sdw: use devres for regmap allocation (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codec: rt286: Use devm_request_threaded_irq to manage IRQ lifetime and fix smatch warning (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: read slave properties from acpi table (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: use acpi initialisation table (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoc: tas2783A: acpi match for 4 channel for mtl (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoc: tas2783A: fw name based on system details (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: fix error log for calibration data (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: update default init writes (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: use custom firmware (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tas2783A: sdw_utils: support ch 3 & 4 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-control: Add support for generic bytes control (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4: Add definition for generic bytes control (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4: Support for sending payload along with LARGE_CONFIG_GET (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-topology: Set initial param_id for bytes control type (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-control: Keep the payload size up to date (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-control: Use the correct size for scontrol->ipc_control_data (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-topology: Correct the allocation size for bytes controls (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-control: If there is no data do not send bytes update (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: tas2780: tidyup format check in tas2780_set_fmt() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: audioreach: Add support for VI Sense module (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: cs-amp-lib: Replace __free(kfree) with normal kfree() cleanup (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: audioreach: Add support for Speaker Protection module (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: support RAE parameters loading (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: Allow sample width wild cards in set_usage() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: rt1320: support calibration and temperature/r0 loading (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codec: rt298: Use devm_request_threaded_irq to manage IRQ lifetime and fix smatch warning (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: ti-common: support tas2563 amplifier (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: sof_rt5682: add tas2563 speaker amp support (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: ES8326: Add kcontrol for DRE (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: ES8326: Add a kcontrol for PGAGAIN (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: oss: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: oss: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: timer: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: vmaster: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: hda: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usx2y: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: usb-audio: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: compress_offload: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: control: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: pcm: Relax __free() variable declarations (Jaroslav Kysela) [RHEL-168091]
|
|
- soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15) (Jaroslav Kysela) [RHEL-168091]
|
|
- soundwire: qcom: Use guard to avoid mixing cleanup and goto (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda: Only check SSP MCLK mask in case of IPC3 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Fix acronym for Intel Gemini Lake (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: pci-nvl: Set on_demand_dsp_boot for NVL-S (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: pci-ptl: Set on_demand_dsp_boot for PTL and WCL (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: pci-lnl: Set on_demand_dsp_boot for LNL (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Intel: hda-sdw-bpt: Add support for on-demand DSP boot (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: sof-client: Add support for on-demand DSP boot (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: Add support for on-demand DSP boot (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: control: skip rpm calls in ext_volatile_get if not implemented (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SOF: ipc4-loader: Remove redundant rpm resume_and_get from load_library (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: sdw-mockup: Drop dummy remove function (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codecs: wm0010: Replace cpu_to_be64 + le64_to_cpu with swab64 (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoc: qcom: q6afe: use guards consistently (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: davinci-mcasp: remove unneeded #ifdef (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: codec: rt274: Use devm_request_threaded_irq to manage IRQ lifetime and fix smatch warning (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Specify image names in the device descriptor (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Drop superfluous space in PCM code (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Simplify catpt_stream_read_position() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Update CATPT_IPC_ERROR macro (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: Intel: catpt: Move IPC error messages one level down (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: SDCA: functions: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp-sdw-sof: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: amd: acp-sdw-legacy: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: qcom: Minor readability improve with new lines (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: Refuse to probe seq drivers with non-bus probe or remove (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: Use bus specific probe and remove (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: midi: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: ump: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: opl3: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: opl4: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: sb: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: emu10k1: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ALSA: seq: oss: Convert to snd_seq bus probe mechanism (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: asoc.h: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: audio_topology: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: audio_codec: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: arizona-micsupp: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: arizona-haptics: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-168091]
|
|
- ASoC: tracing: Export SND_SOC_DAPM_DIR_OUT to its value (Jaroslav Kysela) [RHEL-168091]
|
|
- scsi: qla2xxx: Add support to report MPI FW state (Nilesh Javali) [RHEL-157284]
|
|
|
|
* Mon Jun 01 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-711.el9]
|
|
- s390/tape: Add support for bigger block sizes (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Introduce idal buffer array (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Move idal allocation to core functions (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Fix return value of ccw helper functions (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Remove extra CCW allocation for error recovery (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Remove 3590 Read Opposite error recovery (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Remove 34xx Read Opposite error recovery (Ramesh Chhetri) [RHEL-136092]
|
|
- s390/tape: Remove count parameter from read/write_block functions (Ramesh Chhetri) [RHEL-136092]
|
|
- efi/capsule-loader: fix incorrect sizeof in phys array reallocation (Thomas Huth) [RHEL-168822]
|
|
- arm64: efi: Fix NULL pointer dereference by initializing user_ns (Thomas Huth) [RHEL-168822]
|
|
- arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper (Thomas Huth) [RHEL-168822]
|
|
- efi/runtime-wrappers: Keep track of the efi_runtime_lock owner (Thomas Huth) [RHEL-168822]
|
|
- arm64: fix unnecessary rebuilding when CONFIG_DEBUG_EFI=y (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: use 'targets' instead of extra-y in Makefile (Thomas Huth) [RHEL-168822]
|
|
- arm64/fpsimd: Avoid unnecessary per-CPU buffers for EFI runtime calls (Thomas Huth) [RHEL-168822]
|
|
- efi/cper, cxl: Remove cper_cxl.h (Thomas Huth) [RHEL-168822]
|
|
- efi/cper, cxl: Make definitions and structures global (Thomas Huth) [RHEL-168822]
|
|
- efi/cper, cxl: Prefix protocol error struct and function names with cxl_ (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Merge PE and handover entrypoints (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Call mixed mode boot services on the firmware's stack (Thomas Huth) [RHEL-168822]
|
|
- efi: Use BIT_ULL() constants for memory attributes (Thomas Huth) [RHEL-168822]
|
|
- efi: Avoid cold plugged memory for placing the kernel (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: Limit compression options to GZIP and ZSTD (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Take command line overrides into account for loaded files (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Fix command line fallback handling when loading files (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Parse builtin command line after bootloader provided one (Thomas Huth) [RHEL-168822]
|
|
- x86/efi: Apply EFI Memory Attributes after kexec (Thomas Huth) [RHEL-168822]
|
|
- x86/efi: Drop support for the EFI_PROPERTIES_TABLE (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: Fix outdated comment about using LoadImage/StartImage (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline() (Thomas Huth) [RHEL-168822]
|
|
- efi: Remove redundant null pointer checks in efi_debugfs_init() (Thomas Huth) [RHEL-168822]
|
|
- efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array (Thomas Huth) [RHEL-168822]
|
|
- efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr() (Thomas Huth) [RHEL-168822]
|
|
- x86/efi: Drop support for fake EFI memory maps (Thomas Huth) [RHEL-168822]
|
|
- efi: Add missing __nocfi annotations to runtime wrappers (Thomas Huth) [RHEL-168822]
|
|
- x86/boot: Move mem_encrypt= parsing to the decompressor (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Add generic support for parsing mem_encrypt= (Thomas Huth) [RHEL-168822]
|
|
- x86/efi: Implement arch_ima_efi_boot_mode() in source file (Thomas Huth) [RHEL-168822]
|
|
- efi: Don't add memblocks for soft-reserved memory (Thomas Huth) [RHEL-168822]
|
|
- efi: expose efivar generic ops register function (Thomas Huth) [RHEL-168822]
|
|
- efi: dev-path-parser: use acpi_dev_uid_match() for matching _UID (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad (Thomas Huth) [RHEL-168822]
|
|
- efi/esrt: Allow ESRT access without CAP_SYS_ADMIN (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: zboot: Avoid eager evaluation of objcopy flags (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: arm64: Grab code size from ELF symbol in payload (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: arm64: Inject kernel code size symbol into the zboot payload (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: Set forward edge CFI compat header flag if supported (Thomas Huth) [RHEL-168822]
|
|
- efi/zboot: Add BSS padding before compression (Thomas Huth) [RHEL-168822]
|
|
- efi: arm64: Wire up BTI annotation in memory attributes table (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Export several helpers for ghes_edac to use (Thomas Huth) [RHEL-168822]
|
|
- firmware: dmi: Fortify entry point length checks (Thomas Huth) [RHEL-168822]
|
|
- efi/dev-path-parser: Refactor _UID handling to use acpi_dev_uid_to_integer() (Thomas Huth) [RHEL-168822]
|
|
- firmware: dmi: Use the proper accessor for the version field (Thomas Huth) [RHEL-168822]
|
|
- efi: vars: Drop __efivar_entry_iter() helper which is no longer used (Thomas Huth) [RHEL-168822]
|
|
- firmware: arm_scmi: Relax base protocol sanity checks on the protocol list (Thomas Huth) [RHEL-168822]
|
|
- efi: Wipe INITRD config table from memory after consumption (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Fix cper_bits_to_str buffer handling and return value (Thomas Huth) [RHEL-168822]
|
|
- docs: efi: add CPER functions to driver-api (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Add a new helper function to print bitmasks (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Adjust infopfx size to accept an extra space (Thomas Huth) [RHEL-168822]
|
|
- efi: Fix trailing whitespace in header file (Thomas Huth) [RHEL-168822]
|
|
- efi/memattr: Convert efi_memattr_init() return type to void (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Fix page table access in 5-level to 4-level paging transition (Thomas Huth) [RHEL-168822]
|
|
- PCI: rcar-host: Add OF Kconfig dependency to avoid objtool no-cfi warning (Thomas Huth) [RHEL-168822]
|
|
- objtool: Validate kCFI calls (Thomas Huth) [RHEL-168822]
|
|
- efistub: Lower default log level (Thomas Huth) [RHEL-168822]
|
|
- arm64: efi: Fix KASAN false positive for EFI runtime stack (Thomas Huth) [RHEL-168822]
|
|
- efi/efi_test: Fix missing pending status update in getwakeuptime (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Describe missing 'out' parameter in efi_load_initrd (Thomas Huth) [RHEL-168822]
|
|
- efi: Improve logging around memmap init (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Avoid CopyMem/SetMem EFI services after ExitBootServices (Thomas Huth) [RHEL-168822]
|
|
- efi: efibc: change kmalloc(size * count, ...) to kmalloc_array() (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Avoid physical address 0x0 when doing random allocation (Thomas Huth) [RHEL-168822]
|
|
- efi/mokvar-table: Avoid repeated map/unmap of the same page (Thomas Huth) [RHEL-168822]
|
|
- efi: Don't map the entire mokvar table to determine its size (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Fix cper_arm_ctx_info alignment (Thomas Huth) [RHEL-168822]
|
|
- efi/cper: Fix cper_ia_proc_ctx alignment (Thomas Huth) [RHEL-168822]
|
|
- x86/efi: skip memattr table on kexec boot (Thomas Huth) [RHEL-168822]
|
|
- efi: libstub: Use '-std=gnu11' to fix build with GCC 15 (Thomas Huth) [RHEL-168822]
|
|
- efi: sysfb_efi: fix W=1 warnings when EFI is not set (Thomas Huth) [RHEL-168822]
|
|
- efi/esrt: remove esre_attribute::store() (Thomas Huth) [RHEL-168822]
|
|
- efi: Fix memory leak in efivar_ssdt_load (Thomas Huth) [RHEL-168822]
|
|
- efi: ssdt: Don't free memory if ACPI table was loaded successfully (Thomas Huth) [RHEL-168822]
|
|
- efi: fix memory leak in krealloc failure handling (Thomas Huth) [RHEL-168822]
|
|
- efi: avoid efivars layer when loading SSDTs from variables (Thomas Huth) [RHEL-168822]
|
|
- efi/memattr: Ignore table if the size is clearly bogus (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Free correct pointer on failure (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: measure initrd to PCR9 independent of source (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: fix efi_parse_options() ignoring the default command line (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Revert to heap allocated boot_params for PE entrypoint (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Zero initialize heap allocated struct screen_info (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Avoid returning EFI_SUCCESS on error (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: zboot.lds: Discard .discard sections (Thomas Huth) [RHEL-168822]
|
|
- efi: libstub: only free priv.runtime_map when allocated (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Reinstate soft limit for initrd loading (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Add one kernel-doc comment (Thomas Huth) [RHEL-168822]
|
|
- efi: Remove unused extern declaration efi_lookup_mapped_addr() (Thomas Huth) [RHEL-168822]
|
|
- efi/libstub: Disable PCI DMA before grabbing the EFI memory map (Thomas Huth) [RHEL-168822]
|
|
- efi: make kobj_type structure constant (Thomas Huth) [RHEL-168822]
|
|
- efi/capsule-loader: fix incorrect allocation size (Thomas Huth) [RHEL-168822]
|
|
- efi: memmap: fix kernel-doc warnings (Thomas Huth) [RHEL-168822]
|
|
- x86/efistub: Fix PCI ROM preservation in mixed mode (Thomas Huth) [RHEL-168822]
|
|
- efi/cper, cxl: Remove cxl_err.h (Thomas Huth) [RHEL-168822]
|
|
- efi/earlycon: Speed up scrolling by disregarding empty space (Thomas Huth) [RHEL-168822]
|
|
- x86/pvh: Make PVH entrypoint PIC for x86-64 (Thomas Huth) [RHEL-168822]
|
|
- efi: sysfb_efi: remove unnecessary <asm/efi.h> include (Thomas Huth) [RHEL-168822]
|
|
- efifb: Remove redundant efifb_setup_from_dmi stub (Thomas Huth) [RHEL-168822]
|
|
- efi: Add missing prototype for efi_capsule_setup_info (Thomas Huth) [RHEL-168822]
|
|
- include/linux/efi.h: Remove unneeded whitespaces before tabs (Thomas Huth) [RHEL-168822]
|
|
- firmware: dmi-sysfs: Fix null-ptr-deref in dmi_sysfs_register_handle (Thomas Huth) [RHEL-168822]
|
|
- efi/earlycon: Replace open coded strnchrnul() (Thomas Huth) [RHEL-168822]
|
|
- efi: efibc: Guard against allocation failure (Thomas Huth) [RHEL-168822]
|
|
- efi: efibc: avoid efivar API for setting variables (Thomas Huth) [RHEL-168822]
|
|
- efi: vars: Use locking version to iterate over efivars linked lists (Thomas Huth) [RHEL-168822]
|
|
- nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl() (Ewan D. Milne) [RHEL-171725]
|
|
- nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl() (Ewan D. Milne) [RHEL-171725]
|
|
- redhat: added INTEL_MEI_LB config (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: add nova lake point H DID (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: late_bind: fix struct intel_lb_component_ops kernel-doc (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: use PCI_DEVICE_DATA macro (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: reduce the scope on unexpected reset (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: trace: treat reg parameter as string (Krzysztof Pawlinski) [RHEL-117354]
|
|
- misc/mei: gsc_proxy: add dependency on Xe driver (Krzysztof Pawlinski) [RHEL-117354]
|
|
- misc/mei: Allow building standalone for compile testing (Krzysztof Pawlinski) [RHEL-117354]
|
|
- misc/mei: Decouple ME interfaces from GPU drivers (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Drop unused vsc_tp_request_irq() and vsc_tp_free_irq() (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: add nova lake point S DID (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: Fix error handling in mei_register (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: gsc: add dependency on Xe driver (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: Remove redundant pm_runtime_mark_last_busy() calls (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: fix error flow in probe (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: txe: fix initialization order (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: late_bind: Fix -Wincompatible-function-pointer-types-strict (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: late_bind: add late binding component driver (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: bus: add mei_cldev_mtu interface (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: gsc: demote unexpected reset print (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: bus: demote error on connect (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: retry connect if interrupted by link reset (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: make a local copy of client uuid in connect (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: trigger link reset if hw ready is unexpected (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: gsc: fix remove operations order (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: hook mei_device on class device (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: more prints with client prefix (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: bus: use cldev in prints (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: bus: Check for still connected devices in mei_cl_bus_dev_release() (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Fix "BUG: Invalid wait context" lockdep error (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Run event callback from a workqueue (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Unset the event callback on remove and probe errors (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Event notifier fixes (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Destroy mutex after freeing the IRQ (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Use vsc_tp_remove() as shutdown handler (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Don't call vsc_tp_reset() a second time on shutdown (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Don't re-init VSC from mei_vsc_hw_reset() on stop (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: bus: replace sprintf/scnprintf with sysfs_emit in show functions (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Cast tx_buf to (__be32 *) when passed to cpu_to_be32_array() (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: Cast the cb->ext_hdr allocation type (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Fix fortify-panic caused by invalid counted_by() use (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: me: add panther lake H DID (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: Remove unused functions (Krzysztof Pawlinski) [RHEL-117354]
|
|
- mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO (Krzysztof Pawlinski) [RHEL-117354]
|
|
- scsi: smartpqi: Silence a recursive lock warning (Tomas Henzl) [RHEL-141518]
|
|
- drivers/video/logo: new kconfig (Mika Penttilä) [RHEL-135262]
|
|
- drivers/video/logo: compile fix (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by default (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: move logo selection logic to Kconfig (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: remove logo_mac_clut224 (Mika Penttilä) [RHEL-135262]
|
|
- newport_con: depend on LOGO_LINUX_CLUT224 instead of LOGO_SGI_CLUT224 (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: allow custom logo (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: add a type parameter to the logo makefile function (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Replace license boilerplate by SPDX header (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Fold au1100fb.h into its only user (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Replace custom printk wrappers by pr_* (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Make driver compilable on non-mips platforms (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Use proper conversion specifiers in printk formats (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Don't store device specific data in global variables (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Remove struct fbcon_display.inverse (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: ffb: fix corrupted video output on Sun FFB1 (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: au1100fb: Check return value of clk_enable() in .resume() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: fix fb_pad_unaligned_buffer mask (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: of: display_timing: fix refcount leak in of_get_display_timings() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: vt8500lcdfb: fix missing dma_free_coherent() (Mika Penttilä) [RHEL-135262]
|
|
- video/logo: remove orphan .pgm Makefile rule (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: omapfb: remove duplicate check in omapfb_setup_mem() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: sh_mobile_lcdc: Make FB_DEVICE dependency optional (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: omapfb: Make FB_DEVICE dependency optional (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: check return value of con2fb_acquire_newinfo() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Use device_create_with_groups() to fix sysfs groups registration race (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: smscufx: properly copy ioctl memory to kernelspace (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: rivafb: fix divide error in nv3_arb() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: ssd1307fb: fix potential page leak in ssd1307fb_probe() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: i810: use appopriate log interface dev_info (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: tridentfb: replace printk() with dev_*() in probe (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: pxafb: Fix multiple clamped values in pxafb_adjust_timing (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: tcx.c fix mem_map to correct smem_start offset (Mika Penttilä) [RHEL-135262]
|
|
- drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setup (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: gxt4500fb: Use dev_err instead of printk (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: gbefb: fix to use physical address instead of dma address (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: vesafb: Use dev_* fn's instead printk (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: vga16fb: Request memory region (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: vga16fb: replace printk() with dev_*() in probe (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: atyfb: Check if pll_ops->init_pll failed (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Set fb_display[i]->mode to NULL when the mode is released (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: valkyriefb: Fix reference count leak in valkyriefb_init (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Fix logic error in "offb" name match (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Make drivers depend on LCD_CLASS_DEVICE (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: radeonfb: Remove stale product link in Kconfig (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: simplefb: Fix use after free in simplefb_detach_genpds() (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: s3fb: Revert mclk stop in suspend (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: mb862xxfb: Use int type to store negative error codes (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Use string choices helpers (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: core: Fix ubsan warning in pixel_to_pat (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: s3fb: Implement powersave for S3 FB (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: xenfb: Use vmalloc_array to simplify code (Mika Penttilä) [RHEL-135262]
|
|
- fbdev/simplefb: Sort headers correctly (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Turn FB_MODE_HELPERS into an internal config option (Mika Penttilä) [RHEL-135262]
|
|
- fbdev: Make drivers depend on FB_TILEBLITTING (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Streamline setting rotated/unrotated bitops (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Move fbcon callbacks into struct fbcon_bitops (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Set rotate_font callback with related callbacks (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Rename struct fbcon_ops to struct fbcon_par (Mika Penttilä) [RHEL-135262]
|
|
- fbcon: Fix empty lines in fbcon.h (Mika Penttilä) [RHEL-135262]
|
|
- drm/vesadrm: Support DRM_FORMAT_C8 (Mika Penttilä) [RHEL-135262]
|
|
- video: pixel_format: Add compare helpers (Mika Penttilä) [RHEL-135262]
|
|
- smb: client: fix OOB reads parsing symlink error response (CKI Backport Bot) [RHEL-171472] {CVE-2026-31613}
|
|
- ipmi:si: Fix check for a misbehaving BMC (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Handle error returns from the SMI sender (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Don't block module unload if the BMC is messed up (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Use a long timeout when the BMC is misbehaving (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Handle waiting messages when BMC failure detected (Tony Camuso) [RHEL-158957]
|
|
- ipmi:ls2k: Make ipmi_ls2k_platform_driver static (Tony Camuso) [RHEL-158957]
|
|
- ipmi: ipmb: initialise event handler read bytes (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Consolidate the run to completion checking for xmit msgs lock (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Fix use-after-free and list corruption on sender error (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Switch to use %%ptSp (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Skip channel scan if channels are already marked ready (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Fix __scan_channels() failing to rescan channels (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Fix the race between __scan_channels() and deliver_response() (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Fix handling of messages with provided receive message pointer (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Add Loongson-2K BMC support (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Gracefully handle if the BMC is non-functional (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Rename "user_data" to "recv_msg" in an SMI message (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Allow an SMI sender to return an error (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Move flags get start to its own function (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Merge some if statements (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Set a timer for maintenance mode (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Add a maintenance mode sysfs file (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Disable sysfs access and requests in maintenance mode (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Differentiate between reset and firmware update in maintenance (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Rework user message limit handling (Tony Camuso) [RHEL-158957]
|
|
- Revert "ipmi: fix msg stack when IPMI is disconnected" (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler:Change seq_lock to a mutex (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Use dev_warn_ratelimited() for incorrect message warnings (Tony Camuso) [RHEL-158957]
|
|
- char: ipmi: remove redundant variable 'type' and check (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Fix strcpy source and destination the same (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Fix potential memory corruption in ipmi_create_user() (Tony Camuso) [RHEL-158957]
|
|
- ipmi:watchdog: Use the new interface for panic messages (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Export and fix panic messaging capability (Tony Camuso) [RHEL-158957]
|
|
- ipmi:ssif: Fix a shutdown race (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Don't deliver messages to deleted users (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Rework startup of IPMI devices (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Add a error return from unhandle LAN cmds (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Shut down lower layer first at unregister (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Remove proc_fs.h (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Don't check for shutdown when returning responses (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Don't acquire a user refcount for queued messages (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Fix locking around users and interfaces (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Remove some user level processing in panic mode (Tony Camuso) [RHEL-158957]
|
|
- ipmi: Add a note about the pretimeout callback (Tony Camuso) [RHEL-158957]
|
|
- ipmi:watchdog: Change lock to mutex (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Remove srcu for the ipmi_interfaces list (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Remove srcu from the ipmi user structure (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Use the system_wq, not system_bh_wq (Tony Camuso) [RHEL-158957]
|
|
- ipmi_msghandler: Change the events lock to a mutex (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Deliver user messages in a work queue (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Rename recv_work to smi_work (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Use READ_ONCE on run_to_completion (Tony Camuso) [RHEL-158957]
|
|
- ipmi:si: Move SI type information into an info structure (Tony Camuso) [RHEL-158957]
|
|
- ipmi:msghandler: Move timer handling into a work queue (Tony Camuso) [RHEL-158957]
|
|
|
|
* Wed May 27 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-710.el9]
|
|
- proc: fix type confusion in pde_set_flags() (Abhi Das) [RHEL-171801] {CVE-2025-38653}
|
|
- proc: fix missing pde_set_flags() for net proc files (Abhi Das) [RHEL-171801] {CVE-2025-38653}
|
|
- proc: use the same treatment to check proc_lseek as ones for proc_read_iter et.al (Abhi Das) [RHEL-171801] {CVE-2025-38653}
|
|
- crypto: authenc - Correctly pass EINPROGRESS back up to the caller (Vladislav Dronov) [RHEL-172166]
|
|
- crypto: authenc - Fix sleep in atomic context in decrypt_tail (Vladislav Dronov) [RHEL-172166]
|
|
|
|
* Mon May 25 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-709.el9]
|
|
- netfilter: ctnetlink: ensure safe access to master conntrack (Florian Westphal) [RHEL-173885] {CVE-2026-43116}
|
|
- xfs: fix remote xattr valuelblk check (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- xfs: fix the xattr scrub to detect freemap/entries array collisions (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- xfs: strengthen attr leaf block freemap checking (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- xfs: refactor attr3 leaf table size computation (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- xfs: fix freemap adjustments when adding xattrs to leaf blocks (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- xfs: delete attr leaf freemap entries when empty (CKI Backport Bot) [RHEL-174056] {CVE-2026-43158}
|
|
- Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync (CKI Backport Bot) [RHEL-172859] {CVE-2026-31772}
|
|
- Bluetooth: SCO: fix race conditions in sco_sock_connect() (CKI Backport Bot) [RHEL-172600] {CVE-2026-43023}
|
|
- Bluetooth: MGMT: validate LTK enc_size on load (CKI Backport Bot) [RHEL-172573] {CVE-2026-43020}
|
|
|
|
* Wed May 20 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-708.el9]
|
|
- netfilter: flowtable: strictly check for maximum number of actions (CKI Backport Bot) [RHEL-176922] {CVE-2026-43329}
|
|
- xfrm: esp: avoid in-place decrypt on shared skb frags (Sabrina Dubroca) [RHEL-174565] {CVE-2026-43284}
|
|
- net: sched: act_csum: validate nested VLAN headers (CKI Backport Bot) [RHEL-171139] {CVE-2026-31684}
|
|
- cifs: make default value of retrans as zero (Paulo Alcantara) [RHEL-159632]
|
|
|
|
* Mon May 18 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-707.el9]
|
|
- ptrace: slightly saner 'get_dumpable()' logic (Ricardo Robaina) [RHEL-176447] {CVE-2026-46333}
|
|
- mm/page_alloc: clear page->private in free_pages_prepare() (Rafael Aquini) [RHEL-174754] {CVE-2026-43303}
|
|
- smb: client: validate dacloffset before building DACL pointers (Paulo Alcantara) [RHEL-172822]
|
|
- smb: client: use kzalloc to zero-initialize security descriptor buffer (Paulo Alcantara) [RHEL-172822]
|
|
- smb: client: scope end_of_dacl to CIFS_DEBUG2 use in parse_dacl (Paulo Alcantara) [RHEL-172822]
|
|
- smb: client: require a full NFS mode SID before reading mode bits (Paulo Alcantara) [RHEL-172822]
|
|
- smb: client: validate the whole DACL before rewriting it in cifsacl (Paulo Alcantara) [RHEL-172822] {CVE-2026-31709}
|
|
- dpll: zl3073x: add ref-sync pair support (Ivan Vecera) [RHEL-167274]
|
|
- dpll: zl3073x: add ref sync and output clock type helpers (Ivan Vecera) [RHEL-167274]
|
|
- dpll: zl3073x: use FIELD_MODIFY() for clear-and-set patterns (Ivan Vecera) [RHEL-167274]
|
|
- dpll: zl3073x: clean up esync get/set and use zl3073x_out_is_ndiv() (Ivan Vecera) [RHEL-167274]
|
|
- dpll: zl3073x: implement frequency monitoring (Ivan Vecera) [RHEL-167834]
|
|
- dpll: add frequency monitoring callback ops (Ivan Vecera) [RHEL-167834]
|
|
- dpll: add frequency monitoring to netlink spec (Ivan Vecera) [RHEL-167834]
|
|
- dpll: zl3073x: drop selected and simplify connected ref getter (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: add reference priority to zl3073x_chan (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: add DPLL channel status fields to zl3073x_chan (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: introduce zl3073x_chan for DPLL channel state (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: add zl3073x_ref_state_update helper (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: use struct_group to partition states (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: add die temperature reporting for supported chips (Ivan Vecera) [RHEL-172939]
|
|
- dpll: zl3073x: detect DPLL channel count from chip ID at runtime (Ivan Vecera) [RHEL-172939]
|
|
- blk-cgroup: wait for blkcg cleanup before initializing new disk (Ming Lei) [RHEL-105810]
|
|
- scsi: ses: Fix devices attaching to different hosts (Tomas Henzl) [RHEL-68372]
|
|
|
|
* Thu May 14 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-706.el9]
|
|
- ice: fix infinite recursion in ice_cfg_tx_topo via ice_init_dev_hw (CKI Backport Bot) [RHEL-142433]
|
|
- io_uring/kbuf: check if target buffer list is still legacy on recycle (Jeff Moyer) [RHEL-161185]
|
|
- sctp: discard stale INIT after handshake completion (Xin Long) [RHEL-158357]
|
|
- netfilter: skip recording stale or retransmitted INIT (Xin Long) [RHEL-158357]
|
|
- ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr (CKI Backport Bot) [RHEL-169733] {CVE-2025-68183}
|
|
- net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop (CKI Backport Bot) [RHEL-166730] {CVE-2025-39766}
|
|
- net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit (CKI Backport Bot) [RHEL-166730] {CVE-2025-39766}
|
|
|
|
* Wed May 13 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-705.el9]
|
|
- netfilter: nf_conntrack_helper: pass helper to expect cleanup (CKI Backport Bot) [RHEL-172621] {CVE-2026-43027}
|
|
- netfilter: ip6t_eui64: reject invalid MAC header for all packets (CKI Backport Bot) [RHEL-171156] {CVE-2026-31685}
|
|
- crypto: tegra - Disable softirqs before finalizing request (CKI Backport Bot) [RHEL-170915]
|
|
- dm-thin: fix metadata refcount underflow (Benjamin Marzinski) [RHEL-169624]
|
|
- dm cache: fix missing return in invalidate_committed's error path (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache metadata: fix memory leak on metadata abort retry (Benjamin Marzinski) [RHEL-169975]
|
|
- dm cache: prevent entering passthrough mode after unclean shutdown (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache: fix dirty mapping checking in passthrough mode switching (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache: fix concurrent write failure in passthrough mode (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache policy smq: fix missing locks in invalidating cache blocks (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache: fix write hang in passthrough mode (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache: fix write path cache coherency in passthrough mode (Benjamin Marzinski) [RHEL-169976]
|
|
- dm cache: fix null-deref with concurrent writes in passthrough mode (Benjamin Marzinski) [RHEL-169976]
|
|
- x86/platform/uv: Handle deconfigured sockets (Krzysztof Pawlinski) [RHEL-158968]
|
|
- scsi: qla2xxx: Fix improper freeing of purex item (CKI Backport Bot) [RHEL-161149] {CVE-2025-68741}
|
|
- netfilter: ctnetlink: use netlink policy range checks (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry (Florian Westphal) [RHEL-152685]
|
|
- nfnetlink_osf: validate individual option lengths in fingerprints (Florian Westphal) [RHEL-152685]
|
|
- netfilter: bpf: defer hook memory release until rcu readers are done (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_conntrack_h323: check for zero length in DecodeQ931() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: xt_CT: drop pending enqueued packets on template removal (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nft_ct: drop pending enqueued packets on removal (Florian Westphal) [RHEL-152685]
|
|
- nf_tables: nft_dynset: fix possible stateful expression memleak in error path (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_conntrack_h323: fix OOB read in decode_int() CONS case (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: conntrack: add missing netlink policy validations (Florian Westphal) [RHEL-152685]
|
|
- netfilter: ctnetlink: fix use-after-free in ctnetlink_dump_exp_ct() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: xt_IDLETIMER: reject rev0 reuse of ALARM timer labels (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path (Florian Westphal) [RHEL-152685]
|
|
- netfilter: x_tables: guard option walkers against 1-byte tail reads (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: unconditionally bump set->nelems before insertion (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: fix set size with rbtree backend (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: always increment set element count (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: cleanup documentation (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: avoid false-positive lockdep splats with basechain hook (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: avoid false-positive lockdep splats in set walker (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: avoid false-positive lockdep splats with flowtables (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: avoid false-positive lockdep splats with sets (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: missing extended netlink error in lookup functions (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_tables: avoid false-positive lockdep splat on rule deletion (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nf_conntrack_h323: fix OOB read in decode_choice() (Florian Westphal) [RHEL-152685]
|
|
- netfilter: nft_set_hash: fix get operation on big endian (Florian Westphal) [RHEL-152685]
|
|
- netfilter: xt_tcpmss: check remaining length before reading optlen (Florian Westphal) [RHEL-152685]
|
|
|
|
* Tue May 12 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-704.el9]
|
|
- powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Expose all package CPUs in PMU cpumask (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Remove incorrect CPU check in PMU context (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Add PL4 support for Ice Lake (David Arcari) [RHEL-128568]
|
|
- powercap: Replace sprintf() with sysfs_emit() in sysfs show functions (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Fix possible recursive lock warning (David Arcari) [RHEL-128568]
|
|
- powercap: fix sscanf() error return value handling (David Arcari) [RHEL-128568]
|
|
- powercap: fix race condition in register_control_type() (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Enable MSR-based RAPL PMU support (David Arcari) [RHEL-128568]
|
|
- x86/msr: Rename 'rdmsrl_safe_on_cpu()' to 'rdmsrq_safe_on_cpu()' [partial] (David Arcari) [RHEL-128568]
|
|
- x86/msr: Rename 'wrmsrl_safe()' to 'wrmsrq_safe()' [partial] (David Arcari) [RHEL-128568]
|
|
- x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()' [partial] (David Arcari) [RHEL-128568]
|
|
- powercap: intel_rapl: Add support for Nova Lake processors (David Arcari) [RHEL-128568]
|
|
- powercap: idle_inject: use us_to_ktime() where appropriate (David Arcari) [RHEL-128568]
|
|
- HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq (CKI Backport Bot) [RHEL-172741] {CVE-2026-43051}
|
|
- RDMA/rw: Fall back to direct SGE on MR pool exhaustion (Kamal Heib) [RHEL-163491]
|
|
- RDMA/umem: Fix double dma_buf_unpin in failure path (Kamal Heib) [RHEL-163491]
|
|
- RDMA/core: Fix stale RoCE GIDs during netdev events at registration (Kamal Heib) [RHEL-163491]
|
|
- RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc (Kamal Heib) [RHEL-163491]
|
|
- RDMA/core: add rdma_rw_max_sge() helper for SQ sizing (Kamal Heib) [RHEL-163491]
|
|
- RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send (Kamal Heib) [RHEL-163491]
|
|
- RDMA/iwcm: Fix workqueue list corruption by removing work_list (Kamal Heib) [RHEL-163491]
|
|
- IB/cache: update gid cache on client reregister event (Kamal Heib) [RHEL-163491]
|
|
- RDMA/core: always drop device refcount in ib_del_sub_device_and_put() (Kamal Heib) [RHEL-163491]
|
|
- RDMA/core: Fix logic error in ib_get_gids_from_rdma_hdr() (Kamal Heib) [RHEL-163491]
|
|
- RDMA/cm: Fix leaking the multicast GID table reference (Kamal Heib) [RHEL-163491]
|
|
- RDMA/core: Check for the presence of LS_NLA_TYPE_DGID correctly (Kamal Heib) [RHEL-163491]
|
|
- ice: Fix NULL pointer dereference in ice_vsi_set_napi_queues (CKI Backport Bot) [RHEL-99101]
|
|
- md/raid5: Fix UAF on IO across the reshape position (Nigel Croxon) [RHEL-129338]
|
|
- md/md-llbitmap: raise barrier before state machine transition (Nigel Croxon) [RHEL-129338]
|
|
- md/md-llbitmap: skip reading rdevs that are not in_sync (Nigel Croxon) [RHEL-129338]
|
|
- md: suppress spurious superblock update error message for dm-raid (Nigel Croxon) [RHEL-129338]
|
|
- md/dm-raid: check before referencing mddev->bitmap_ops (Nigel Croxon) [RHEL-129338]
|
|
- block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits (Nigel Croxon) [RHEL-129338]
|
|
- md: ignore discard return value (Nigel Croxon) [RHEL-129338]
|
|
- dm: clear unmap write zeroes limits when disabling write zeroes (Nigel Croxon) [RHEL-129338]
|
|
- md: adding a CONFIG_MD_LLBITMAP file to build (Nigel Croxon) [RHEL-129338]
|
|
- md: fix return value of mddev_trylock (Nigel Croxon) [RHEL-129338]
|
|
- md/raid1: fix memory leak in raid1_run() (Nigel Croxon) [RHEL-129338]
|
|
- md raid: fix hang when stopping arrays with metadata through dm-raid (Nigel Croxon) [RHEL-129338]
|
|
- md-cluster: fix NULL pointer dereference in process_metadata_update (Nigel Croxon) [RHEL-129338]
|
|
- md/bitmap: fix GPF in write_page caused by resize race (Nigel Croxon) [RHEL-129338]
|
|
- md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: fix IO hang with degraded array with llbitmap (Nigel Croxon) [RHEL-129338]
|
|
- md: remove recovery_disabled (Nigel Croxon) [RHEL-129338]
|
|
- md/raid10: cleanup skip handling in raid10_sync_request (Nigel Croxon) [RHEL-129338]
|
|
- md/raid10: fix any_working flag handling in raid10_sync_request (Nigel Croxon) [RHEL-129338]
|
|
- md: move finish_reshape to md_finish_sync() (Nigel Croxon) [RHEL-129338]
|
|
- md: factor out sync completion update into helper (Nigel Croxon) [RHEL-129338]
|
|
- md: remove MD_RECOVERY_ERROR handling and simplify resync_offset update (Nigel Croxon) [RHEL-129338]
|
|
- md: update curr_resync_completed even when MD_RECOVERY_INTR is set (Nigel Croxon) [RHEL-129338]
|
|
- md: factor error handling out of md_done_sync into helper (Nigel Croxon) [RHEL-129338]
|
|
- md/raid1: simplify uptodate handling in end_sync_write (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: make sure max_sectors is not less than io_opt (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: use mempool to allocate stripe_request_ctx (Nigel Croxon) [RHEL-129338]
|
|
- md: merge mddev serialize_policy into mddev_flags (Nigel Croxon) [RHEL-129338]
|
|
- md: merge mddev faillast_dev into mddev_flags (Nigel Croxon) [RHEL-129338]
|
|
- md: merge mddev has_superblock into mddev_flags (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: fix raid5_run() to return error when log_init() fails (Nigel Croxon) [RHEL-129338]
|
|
- md: fix missing integer (Nigel Croxon) [RHEL-129338]
|
|
- md: Fix forward incompatibility from configurable logical block size (Nigel Croxon) [RHEL-129338]
|
|
- md: Fix logical_block_size configuration being overwritten (Nigel Croxon) [RHEL-129338]
|
|
- md: suspend array while updating raid_disks via sysfs (Nigel Croxon) [RHEL-129338] {CVE-2025-71225}
|
|
- md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt() (Nigel Croxon) [RHEL-129338] {CVE-2025-71135}
|
|
- md: Fix static checker warning in analyze_sbs (Nigel Croxon) [RHEL-129338]
|
|
- md: remove legacy 1s delay in md_notify_reboot (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: fix IO hang when array is broken with IO inflight (Nigel Croxon) [RHEL-129338]
|
|
- md: warn about updating super block failure (Nigel Croxon) [RHEL-129338]
|
|
- md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid (Nigel Croxon) [RHEL-129338]
|
|
- md: allow configuring logical block size (Nigel Croxon) [RHEL-129338]
|
|
- md: add check_new_feature module parameter (Nigel Croxon) [RHEL-129338]
|
|
- md: fix how device node is created and removed (Nigel Croxon) [RHEL-129338]
|
|
- md/raid0: Move queue limit setup before r0conf initialization (Nigel Croxon) [RHEL-129338]
|
|
- md: init bioset in mddev_init (Nigel Croxon) [RHEL-129338] {CVE-2025-68368}
|
|
- md: delete md_redundancy_group when array is becoming inactive (Nigel Croxon) [RHEL-129338]
|
|
- md: prevent adding disks with larger logical_block_size to active arrays (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: remove redundant __GFP_NOWARN (Nigel Croxon) [RHEL-129338]
|
|
- md: avoid repeated calls to del_gendisk (Nigel Croxon) [RHEL-129338] {CVE-2025-68373}
|
|
- md/md-llbitmap: Remove unneeded semicolon (Nigel Croxon) [RHEL-129338]
|
|
- md/md-linear: Enable atomic writes (Nigel Croxon) [RHEL-129338]
|
|
- Factor out code into md_should_do_recovery() (Nigel Croxon) [RHEL-129338]
|
|
- md: fix rcu protection in md_wakeup_thread (Nigel Croxon) [RHEL-129338] {CVE-2025-68374}
|
|
- md: init queue_limits->max_hw_wzeroes_unmap_sectors parameter (Nigel Croxon) [RHEL-129338]
|
|
- md/md-llbitmap: Use DIV_ROUND_UP_SECTOR_T (Nigel Croxon) [RHEL-129338]
|
|
- md/md-llbitmap: introduce new lockless bitmap (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: make method bitmap_ops->daemon_work optional (Nigel Croxon) [RHEL-129338]
|
|
- md: add a new recovery_flag MD_RECOVERY_LAZY_RECOVER (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: add a new method blocks_synced() in bitmap_operations (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: add a new method skip_sync_blocks() in bitmap_operations (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: delay registration of bitmap_ops until creating bitmap (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: add a new sysfs api bitmap_type (Nigel Croxon) [RHEL-129338]
|
|
- md: add a new mddev field 'bitmap_id' (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: support discard for bitmap ops (Nigel Croxon) [RHEL-129338]
|
|
- md: factor out a helper raid_is_456() (Nigel Croxon) [RHEL-129338]
|
|
- md: add a new parameter 'offset' to md_super_write() (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: introduce CONFIG_MD_BITMAP (Nigel Croxon) [RHEL-129338]
|
|
- md: check before referencing mddev->bitmap_ops (Nigel Croxon) [RHEL-129338]
|
|
- md/raid5: check before referencing mddev->bitmap_ops (Nigel Croxon) [RHEL-129338]
|
|
- md/raid10: check before referencing mddev->bitmap_ops (Nigel Croxon) [RHEL-129338]
|
|
- md/raid1: check before referencing mddev->bitmap_ops (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: remove the parameter 'init' for bitmap_ops->resize() (Nigel Croxon) [RHEL-129338]
|
|
- md/raid1: check bitmap before behind write (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: handle the case bitmap is not enabled before end_sync() (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: handle the case bitmap is not enabled before start_sync() (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: add md_bitmap_registered/enabled() helper (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: add a new parameter 'flush' to bitmap_ops->enabled (Nigel Croxon) [RHEL-129338]
|
|
- md/md-bitmap: merge md_bitmap_group into bitmap_operations (Nigel Croxon) [RHEL-129338]
|
|
- x86/mm: flush IOMMU before freeing kernel page table pages (Jerry Snitselaar) [RHEL-148781] {CVE-2025-71089}
|
|
- iommu/sva: add kernel page table IOTLB flush notification (Jerry Snitselaar) [RHEL-148781] {CVE-2025-71089}
|
|
- ext4: fix dirtyclusters double decrement on fs shutdown (Brian Foster) [RHEL-145583]
|
|
|
|
* Thu May 07 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-703.el9]
|
|
- ibmveth: Disable GSO for packets with small MSS (Mamatha Inamdar) [RHEL-164873]
|
|
- redhat/configs: Enable FFA for TPM on AArch64 (Marcin Juszkiewicz) [RHEL-168115]
|
|
- net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix HCA caps leak on notifier init failure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix crash when moving to switchdev mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix peer miss rules host disabled checks (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: qos: Restrict RTNL area to avoid a lock cycle (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO, Fix skb size check for 64K pages (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO, Fix header mapping for 64K pages (Kamal Heib) [RHEL-169055]
|
|
- IB/mlx5: Reduce IMR KSM size when 5-level paging is enabled (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add other eswitch support to userspace tables (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Refactor _get_prio() function (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add other_eswitch support for devx destruction (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Change default device for LAG slaves in RDMA TRANSPORT namespaces (Kamal Heib) [RHEL-169055]
|
|
- RDMA/core: RDMA/mlx5: replace use of system_unbound_wq with system_dfl_wq (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Skip ESN replay window setup for IPsec crypto offload (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix vhca_id access call trace use before alloc (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fs, Fix inverted cap check in tx flow table root disconnect (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix return type mismatch in mlx5_esw_vport_vhca_id() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Account for netdev stats in ndo_get_stats64 (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: TC, delete flows only for existing peers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix Unbinding uplink-netdev in switchdev mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix memory leak in esw_acl_ingress_lgcy_setup() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Restore destroying state bit after profile cleanup (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix crash on profile change rollback failure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Don't print error message due to invalid module (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix NULL pointer dereference in ioctl module EEPROM query (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Lag, multipath, give priority for routes with smaller network prefix (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Do not update BQL of old txqs during channel reconfiguration (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Trigger neighbor resolution for unresolved destinations (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Serialize firmware reset with devlink (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fw_tracer, Handle escaped percent properly (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fw_tracer, Validate format string parameters (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Drain firmware reset in shutdown callback (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fw reset, clear reset requested on drain_fw_reset (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix double unregister of HCA_PORTS component (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: make enable_mpesw idempotent (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Support XDP target xmit with dummy program (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Update XDP features in switch channels (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use standard unit definitions for bandwidth conversion (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use U8_MAX instead of hard coded magic number (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Rename upper_limit_mbps to upper_limit_100mbps (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use u64 instead of __u64 in ieee_setmaxrate (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Move SF dev table notifier registration outside the PF devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Move the SF table notifiers outside the devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Move the SF HW table notifier outside the devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Move the vhca event notifier outside of the devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Move the esw mode notifier chain outside the devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Initialize events outside devlink lock (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Use EOPNOTSUPP instead of ENOTSUPP (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Abort new commands if all command slots are stalled (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Remove redundant bw_share minimal value assignment (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Recover SQ on excessive PTP TX timestamp delta (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor EEPROM query error handling to return status separately (Kamal Heib) [RHEL-169055]
|
|
- mlx5: extract GRXRINGS from .get_rxnfc (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose definition for 1600Gbps link mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, support eswitch inactive mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: MPFS, add support for dynamic enable/disable (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fs, set non default device per namespace (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fs, Add other_eswitch support for steering tables (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add OTHER_ESWITCH HW capabilities (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add direct ST mode support for RDMA (Kamal Heib) [RHEL-169055]
|
|
- PCI/TPH: Expose pcie_tph_get_st_table_loc() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Defer channels closure to reduce interface down time (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Pass old channels as argument to mlx5e_switch_priv_channels (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Do not re-apply TIR loopback configuration if not necessary (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: IPoIB, set self loopback prevention in TIR init (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Allow setting self loopback prevention bits on TIR init (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use TIR API in mlx5e_modify_tirs_lb() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Enhance function structures for self loopback prevention application (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Convert to new hwtstamp_get/set interface (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Rename timestamp fields to hwtstamp_config (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Rename hwstamp functions to hwtstamp (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove unnecessary tstamp local variable in mlx5i_complete_rx_cqe (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove redundant tstamp pointer from channel structures (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add balance ID support for LAG multiplane groups (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor HCA cap 2 setting (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor PTP clock devcom pairing (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add software system image GUID infrastructure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Use common mlx5_same_hw_devs function (Kamal Heib) [RHEL-169055]
|
|
- {rdma,net}/mlx5: Query vports mac address from device (Kamal Heib) [RHEL-169055]
|
|
- RDMA: Use %%pe format specifier for error pointers (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix page size bitmap calculation for KSM mode (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix vport loopback forcing for MPV device (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Better estimate max_qp_wr to reflect WQE count (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Enable Data-Direct with Relaxed Ordering (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix validation logic in rate limiting (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Clean up only new IRQ glue on request_irq() failure (Kamal Heib) [RHEL-169055]
|
|
- mlx5: Fix default values in create CQ (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix potentially misleading debug message (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix maxrate wraparound in threshold between units (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Trim the length of the num_doorbell error (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix missing error assignment in mlx5e_xfrm_add_state() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix return value in case of module EEPROM read error (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Don't zero user_count when destroying FDB tables (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix IPsec cleanup over MPV device (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor devcom to return NULL on failure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add PPHCR to PCAM supported registers mask (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for striding RQ (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: RX, Fix generating skb from non-linear xdp_buff for legacy RQ (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Return 1 instead of 0 in invalid case in mlx5e_mpwrq_umr_entry_size() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fix pre-2.40 binutils assembler error (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use extack in set rxfh callback (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Introduce mlx5e_rss_params for RSS configuration (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Introduce mlx5e_rss_init_params (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove unused mdev param from RSS indir init (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Improve QoS error messages with actual depth values (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Prevent entering switchdev mode with inconsistent netns (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Generalize complex matchers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fw reset, add reset timeout work (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: pagealloc: Fix reclaim race during command interface teardown (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Stop polling for command response if interface goes down (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: IFC add balance ID and LAG per MP group bits (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add IFC bit for TIR/SQ order capability (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose uar access and odp page fault counters (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Use %%pe format specifier for error pointers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Remove dead code from total_vfs setter (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add flow rules for the decrypted ESP packets (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add flow groups for the packets decrypted by crypto offload (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Recirculate decrypted packets into TTC table (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Change TTC rules to match on undecrypted ESP packets (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add uar access and odp page fault counters (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use unsigned for mlx5e_get_max_num_channels (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use the 'num_doorbells' devlink param (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use multiple CQ doorbells (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Use multiple TX doorbells (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Prepare for using different CQ doorbells (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Prepare for using multiple TX doorbells (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Store the global doorbell in mlx5_priv (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove unused 'xsk' param of mlx5e_build_xdpsq_param (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Remove unused 'offset' field from mlx5_sq_bfreg (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix typo of MLX5_EQ_DOORBEL_OFFSET (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Prevent WQE metadata conflicts between timestamping and offloads (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor MACsec WQE metadata shifts (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Remove VLAN insertion fields from WQE Ether segment (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Lag, add net namespace support (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add net namespace support to devcom (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Lag, move devcom registration to LAG layer (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Refactor devcom to use match attributes (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fix typo in pci_irq.c comment (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add stale counter for PCIe congestion events (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Make PCIe congestion event thresholds configurable (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Implement devlink total_vfs parameter (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Implement devlink enable_sriov parameter (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Implement cqe_compress_type via devlink params (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add RS FEC histogram infrastructure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Support getcyclesx and getcrosscycles (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Extract MTCTR register read logic into helper function (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add PSP capabilities structures and bits (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: {DR,HWS}, Use the cached vhca_id for this device (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-switch, Set representor attributes for adjacent VFs (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Register representors for adjacent vports (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Create acls root namespace for adjacent vports (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Add support for adjacent functions vports discovery (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Move vport acls root namespaces creation to eswitch (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: FS, Convert vport acls root namespaces to xarray (Kamal Heib) [RHEL-169055]
|
|
- eth: mlx5: remove Kconfig co-dependency with VXLAN (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Set default burst period for TX and RX reporters (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Support disabling host PFs (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Query to see if host PF is disabled (Kamal Heib) [RHEL-169055]
|
|
- {rdma,net}/mlx5: export mlx5_vport_get_vhca_id (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Set/Query hca cap via vhca id (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Cache vport vhca id on first cap query (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: mlx5_ifc, Add hardware definitions needed for adjacent vports (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Don't use %%pK through tracepoints (Kamal Heib) [RHEL-169055]
|
|
- IB/mlx5: Fix obj_type mismatch for SRQ event subscriptions (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Refactor optional counters steering code (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add DMAH support for reg_user_mr/reg_user_dmabuf_mr (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add DMAH object support (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix incorrect MKEY masking (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix returned type from _mlx5r_umr_zap_mkey() (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: remove redundant check on err on return expression (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Optimize DMABUF mkey page size (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Align mkc page size capability check to PRM (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Check CAP_NET_RAW in user namespace for devx create (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Check CAP_NET_RAW in user namespace for anchor create (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Check CAP_NET_RAW in user namespace for flow create (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add multiple priorities support to RDMA TRANSPORT userspace tables (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Support driver APIs pre_destroy_cq and post_destroy_cq (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix missing FEC RS stats for RS_544_514_INTERLEAVED_QUAD (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, ignore flow level for multi-dest table (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add a miss level for ipsec crypto offload (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Harden uplink netdev access against device unbind (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Set local Xoff after FW update (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Prevent flow steering mode changes in switchdev mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Nack sync reset when SFs are present (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix lockdep assertion on sync reset unload event (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Reload auxiliary drivers on fw_activate (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix pattern destruction in mlx5hws_pat_get_pattern error path (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix uninitialized variables in mlx5hws_pat_calc_nop error flow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix memory leak in hws_pool_buddy_init error path (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Preserve shared buffer capacity during headroom updates (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Query FW for buffer ownership (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Restore missing scheduling node cleanup on vport enable failure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix QoS reference leak in vport enable error path (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Destroy vport QoS element when no configuration remains (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Preserve tc-bw during parent changes (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Remove default QoS group and attach vports directly to root TSAR (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Base ECVF devlink port attrs from 0 (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: CT: Use the correct counter offset (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix table creation UID (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, don't rehash on every kind of insertion failure (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, prevent rehash from filling up the queues (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix complex rules rehash error flow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix simple rules rehash error flow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix bad parameter in CQ creation (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Correctly set gso_segs when LRO is used (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Expose TIS via devlink tx reporter diagnose (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Support routed networks during IPsec MACs initialization (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix potential deadlock by deferring RX timeout recovery (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove skb secpath if xfrm state is not found (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Clear Read-Only port buffer size in PBMC before update (Kamal Heib) [RHEL-169055]
|
|
- net: Fix typos (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix build -Wframe-larger-than warnings (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add support for device steering tag (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose IFC bits for TPH (Kamal Heib) [RHEL-169055]
|
|
- PCI/TPH: Expose pcie_tph_get_st_table_size() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove duplicate mkey from SHAMPO header (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO, Remove mlx5e_shampo_get_log_hd_entry_size() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO, Cleanup reservation size formula (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose cable_length field in PFCC register (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add IFC bits and enums for buf_ownership (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add IFC bits to support RSS for IPSec offload (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Properly access RCU protected qdisc_sleeping variable (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: fix kdoc warning on eswitch.h (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Enable IPSec hardware offload in legacy mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix an IS_ERR() vs NULL bug in esw_qos_move_node() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add device PCIe congestion ethtool stats (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Create/destroy PCIe Congestion Event object (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: IFC updates for disabled host PF (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose disciplined_fr_counter through HCA capabilities in mlx5_ifc (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix UMR modifying of mkey page size (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose HCA capability bits for mkey max page size (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: RX, Remove unnecessary RQT redirects (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Warn when write combining is not supported (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Replace recursive VLAN push handling with an iterative loop (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: CT: extract a memcmp from a spinlock section (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Remove unused VLAN insertion logic in TX path (Kamal Heib) [RHEL-169055]
|
|
- eth: mlx5: migrate to the *_rxfh_context ops (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix spelling mistake "disabliing" -> "disabling" (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add HWS as secondary steering mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Shrink empty matchers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Rearrange to prevent forward declaration (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Track matcher sizes individually (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Decouple matcher RX and TX sizes (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Create STEs directly from matcher (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Refactor rule skip logic (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Export rule skip logic (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, remove incorrect comment (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, remove unused create_dest_array parameter (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add traffic class scheduling support for vport QoS (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add support for setting tc-bw on nodes (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add no-op implementation for setting tc-bw on rate objects (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Check device memory pointer before usage (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fs, fix RDMA TRANSPORT init cleanup flow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix error handling in RQ memory model registration (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Allocate IB device with net namespace supplied from core dev (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add IFC bits for PCIe Congestion Event object (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Small refactor for general object capabilities (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: fs, add multiple prios to RDMA TRANSPORT steering domain (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Support ethtool tcp-data-split settings (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Implement queue mgmt ops and single channel swap (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO: Separate pool for headers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO: Improve hw gro capability checking (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO: Remove redundant params (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: SHAMPO: Reorganize mlx5_rq_shampo_alloc (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Expose serial numbers in devlink info (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix vport loopback for MPV device (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix CC counters query for MPV (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix HW counters query for non-representor devices (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Avoid flexible array warning (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Add support for 200Gbps per lane speeds (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: convert timeouts to secs_to_jiffies() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: E-Switch, Fix peer miss rules to use peer eswitch (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix memory leak in cmd_exec() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Correctly set gso_size when LRO is used (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Add new prio for promiscuous mode (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix race between DIM disable and net_dim() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Fix leak of Geneve TLV option object (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, make sure the uplink is the last destination (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix missing ip_version handling in definer (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Init mutex on the correct path (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix return value when searching for existing flow group (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Ensure fw pages are always allocated on same NUMA (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix an error code in mlx5hws_bwc_rule_create_complex() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Add error handling in mlx5_query_nic_vport_node_guid() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: Allow setting MAC address of representors (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5_core: Add error handling inmlx5_query_nic_vport_qkey_viol_cntr() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, handle modify header actions dependency (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix typo - 'nope' to 'nop' (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, register reformat actions with fw (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: SWS, fix reformat id error handling (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Use to_delayed_work() (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, dump bad completion details (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, rework rehash loop (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix redundant extension of action templates (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, fix counting of rules in the matcher (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, force rehash when rule insertion failed (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, support complex matchers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, introduce isolated matchers (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, expose polling function in header file (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, add definer function to get field name str (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, expose function mlx5hws_table_ft_set_next_ft in header (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: support software TX timestamp (Kamal Heib) [RHEL-169055]
|
|
- RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Disallow matcher IP version mixing (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Harden IP version definer checks (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix IP version decision (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: Fix spelling mistakes in mlx5_core_dbg message and comments (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5e: ethtool: Fix formatting of ptp_rq0_csum_complete_tail_slow (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Export action STE tables to debugfs (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Free unused action STE tables (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Cleanup matcher action STE table (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Use the new action STE pool (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Implement action STE pool (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix pool size optimization (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Add fullness tracking to pool (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Cleanup after pool refactoring (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Refactor pool implementation (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Make pool single resource (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Remove unused element array (Kamal Heib) [RHEL-169055]
|
|
- net/mlx5: HWS, Fix matcher action template attach (Kamal Heib) [RHEL-169055]
|
|
- redhat/configs: enable ARCH_TEGRA_241_SOC (Marcin Juszkiewicz) [RHEL-166729]
|
|
- soc/tegra: fuse: Define tegra194_soc_attr_group for Tegra241 (Marcin Juszkiewicz) [RHEL-166729]
|
|
- soc/tegra: fuse: Add support for Tegra241 (Marcin Juszkiewicz) [RHEL-166729]
|
|
- drivers/base/node: fix double free in register_one_node() (Mark Langsdorf) [RHEL-156429]
|
|
- PM: domains: Detach on device_unbind_cleanup() (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: get_dev_from_fwnode(): document potential race (Mark Langsdorf) [RHEL-156429]
|
|
- driver core/PM: Set power.no_callbacks along with power.no_pm (Mark Langsdorf) [RHEL-156429]
|
|
- arm64: topology: Do not warn on missing AMU in cpuhp_topology_online() (Mark Langsdorf) [RHEL-156429]
|
|
- genirq: Fix percpu_devid irq affinity documentation (Mark Langsdorf) [RHEL-156429]
|
|
- software node: Also support referencing non-constant software nodes (Mark Langsdorf) [RHEL-156429]
|
|
- platform/x86: intel: chtwc_int33fe: don't dereference swnode args (Mark Langsdorf) [RHEL-156429]
|
|
- usb: hcd: queue wakeup_work to system_freezable_wq workqueue (Mark Langsdorf) [RHEL-156429]
|
|
- device property: Allow secondary lookup in fwnode_get_next_child_node() (Mark Langsdorf) [RHEL-156429]
|
|
- PM: sleep: wakeirq: Update outdated documentation comments (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: remove device_change_owner() export (Mark Langsdorf) [RHEL-156429]
|
|
- PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races (Mark Langsdorf) [RHEL-156429]
|
|
- PM: wakeup: Handle empty list in wakeup_sources_walk_start() (Mark Langsdorf) [RHEL-156429]
|
|
- regcache: Demote defaults readback from HW to debug print (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: add KUnit coverage for reg_default_cb callback (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: Add reg_default_cb callback for flat cache defaults (Mark Langsdorf) [RHEL-156429]
|
|
- driver-core: move devres_for_each_res() to base.h (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: faux: stop using static struct device (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: make pinctrl_bind_pins() private (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: attribute_container: change return type to void (Mark Langsdorf) [RHEL-156429]
|
|
- devtmpfs: Replace simple_strtoul with kstrtoint in mount_param (Mark Langsdorf) [RHEL-156429]
|
|
- devtmpfs: make 'devtmpfs_context_ops' static (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: Enable REGMAP when REGMAP_SLIMBUS is enabled (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: Fix race condition in hwspinlock irqsave routine (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: make bus_find_device_by_acpi_dev() stub prototype aligned (Mark Langsdorf) [RHEL-156429]
|
|
- arm64: topology: Handle AMU FIE setup on CPU hotplug (Mark Langsdorf) [RHEL-156429]
|
|
- PM: runtime: Do not clear needs_force_resume with enabled runtime PM (Mark Langsdorf) [RHEL-156429]
|
|
- PM: sleep: Do not flag runtime PM workqueue as freezable (Mark Langsdorf) [RHEL-156429]
|
|
- PM: runtime: Make pm_runtime_barrier() return void (Mark Langsdorf) [RHEL-156429]
|
|
- PM: WQ_UNBOUND added to pm_wq workqueue (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: Check drivers_autoprobe for all added devices (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: WQ_PERCPU added to alloc_workqueue users (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: replace use of system_unbound_wq with system_dfl_wq (Mark Langsdorf) [RHEL-156429]
|
|
- tick/nohz: avoid showing '(null)' if nohz_full= not set (Mark Langsdorf) [RHEL-156429]
|
|
- sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute (Mark Langsdorf) [RHEL-156429]
|
|
- software node: allow referencing firmware nodes (Mark Langsdorf) [RHEL-156429]
|
|
- software node: increase the reference of the swnode by its fwnode (Mark Langsdorf) [RHEL-156429]
|
|
- software node: read the reference args via the fwnode API (Mark Langsdorf) [RHEL-156429]
|
|
- PM: wakeup: Add out-of-band system wakeup support for devices (Mark Langsdorf) [RHEL-156429]
|
|
- devres: Move devm_alloc_percpu() and related to devres.h (Mark Langsdorf) [RHEL-156429]
|
|
- devres: Remove unused devm_free_percpu() (Mark Langsdorf) [RHEL-156429]
|
|
- PM: Introduce new PMSG_POWEROFF event (Mark Langsdorf) [RHEL-156429]
|
|
- PM: wakeup: Update after recent wakeup source removal ordering change (Mark Langsdorf) [RHEL-156429]
|
|
- PM: wakeup: Delete timer before removing wakeup source from list (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: i3c: Use ARRAY_SIZE() (Mark Langsdorf) [RHEL-156429]
|
|
- regcache: flat: Split ->populate() from ->init() (Mark Langsdorf) [RHEL-156429]
|
|
- regcache: flat: Remove unneeded check and error message for -ENOMEM (Mark Langsdorf) [RHEL-156429]
|
|
- regcache: rbtree: Split ->populate() from ->init() (Mark Langsdorf) [RHEL-156429]
|
|
- PM: runtime: fix typos in runtime.c comments (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: add flat cache with sparse validity (Mark Langsdorf) [RHEL-156429]
|
|
- of/irq: Add interrupt affinity reporting interface (Mark Langsdorf) [RHEL-156429]
|
|
- ACPI: irq: Add interrupt affinity reporting interface (Mark Langsdorf) [RHEL-156429]
|
|
- irqdomain: Add firmware info reporting interface (Mark Langsdorf) [RHEL-156429]
|
|
- platform: Add firmware-agnostic irq and affinity retrieval interface (Mark Langsdorf) [RHEL-156429]
|
|
- PM: runtime: docs: Update pm_runtime_allow/forbid() documentation (Mark Langsdorf) [RHEL-156429]
|
|
- arch_topology: move parse_acpi_topology() to common code (Mark Langsdorf) [RHEL-156429]
|
|
- PM: sleep: Do not wait on SYNC_STATE_ONLY device links (Mark Langsdorf) [RHEL-156429]
|
|
- drivers/base/node: handle error properly in register_one_node() (Mark Langsdorf) [RHEL-156429]
|
|
- devres: provide devm_kmemdup_const() (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: auxiliary bus: Optimize logic of auxiliary_match_id() (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: auxiliary bus: Drop dev_pm_domain_detach() call (Mark Langsdorf) [RHEL-156429]
|
|
- PM: domains: Add flags to specify power on attach/detach (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: Fix order of the kernel-doc parameters (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: Export get_dev_from_fwnode() (Mark Langsdorf) [RHEL-156429]
|
|
- drivers: base: fix "publically"->"publicly" (Mark Langsdorf) [RHEL-156429]
|
|
- PM: core: Add two macros for walking device links (Mark Langsdorf) [RHEL-156429]
|
|
- PM: core: Annotate loops walking device links as _srcu (Mark Langsdorf) [RHEL-156429]
|
|
- driver core: faux: Set power.no_pm for faux devices (Mark Langsdorf) [RHEL-156429]
|
|
- PM: sleep: core: Clear power.must_resume in noirq suspend error path (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: use int type to store negative error codes (Mark Langsdorf) [RHEL-156429]
|
|
- software node: Constify node_group in registration functions (Mark Langsdorf) [RHEL-156429]
|
|
- irqdomain: Make of_phandle_args_to_fwspec() generally available (Mark Langsdorf) [RHEL-156429]
|
|
- cpufreq: Add new helper function returning cpufreq policy (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: Remove superfluous check for !config in __regmap_init() (Mark Langsdorf) [RHEL-156429]
|
|
- regmap: mmio: Add missing MODULE_DESCRIPTION() (Mark Langsdorf) [RHEL-156429]
|
|
- x86/mm: Add missing saved dirty bit to page protection change mask (Thomas Lopatic) [RHEL-151306]
|
|
|
|
* Tue May 05 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-702.el9]
|
|
- crypto: testmgr - block Crypto API xxhash64 in FIPS mode (Vladislav Dronov) [RHEL-170673]
|
|
- rtnetlink: Allocate vfinfo size for VF GUIDs when supported (Kamal Heib) [RHEL-167866] {CVE-2025-22075}
|
|
- pcpcntrs: fix dying cpu summation race (Ravi Singh) [RHEL-154600]
|
|
- sched/rt: Skip currently executing CPU in rto_next_cpu() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/clock: Avoid false sharing for sched_clock_irqtime (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched: Update rq->avg_idle when a task is moved to an idle CPU (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/debug: Convert copy_from_user() + kstrtouint() to kstrtouint_from_user() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Fix pelt clock sync when entering idle (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Remove nohz.nr_cpus and use weight of cpumask instead (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Change likelyhood of nohz.nr_cpus (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Move checking for nohz cpus after time check (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched: Deadline has dynamic priority (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Use cpumask_weight_and() in sched_balance_find_dst_group() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Simplify task_numa_find_cpu() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Drop useless cpumask_empty() in find_energy_efficient_cpu() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Fix sched_avg fold (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Sort out 'blocked_load*' namespace noise (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Avoid rq->lock bouncing in sched_balance_newidle() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Fold the sched_avg update (Herton R. Krzesinski) [RHEL-147187]
|
|
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Fix unfairness caused by stalled tg_load_avg_contrib when the last task migrates out (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/headers: Remove whitespace noise from kernel/sched/sched.h (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/isolation: Force housekeeping if isolcpus and nohz_full don't leave any (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Proportional newidle balance (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Small cleanup to update_newidle_cost() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Small cleanup to sched_balance_newidle() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Revert max_newidle_lb_cost bump (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Have SD_SERIALIZE affect newidle balancing (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Skip sched_balance_running cmpxchg when balance is not due (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/deadline: Minor cleanup in select_task_rq_dl() (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/deadline: Use cpumask_weight_and() in dl_bw_cpus (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/core: Optimize core cookie matching check (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/fair: Only update stats for allowed CPUs when looking for dst group (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/deadline: only set free_cpus for online runqueues (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/core: Avoid direct access to hrtimer clockbase (Herton R. Krzesinski) [RHEL-147187]
|
|
- sched/deadline: Fix race in push_dl_task() (Herton R. Krzesinski) [RHEL-147187]
|
|
|
|
* Mon May 04 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-701.el9]
|
|
- crypto: algif_aead - snapshot IV for async AEAD requests (Herbert Xu) [RHEL-172207]
|
|
- crypto: algif_aead - Fix minimum RX size check for decryption (Herbert Xu) [RHEL-172207]
|
|
- crypto: authencesn - reject short ahash digests during instance creation (Herbert Xu) [RHEL-172207]
|
|
- crypto: authencesn - Fix src offset when decrypting in-place (Herbert Xu) [RHEL-172207]
|
|
- crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption (Herbert Xu) [RHEL-172207] {CVE-2026-31431}
|
|
- crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec (Herbert Xu) [RHEL-172207] {CVE-2026-23060}
|
|
- crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl (Herbert Xu) [RHEL-172207]
|
|
- crypto: af_alg - limit RX SG extraction by receive buffer budget (Herbert Xu) [RHEL-172207] {CVE-2026-31677}
|
|
- crypto: algif_aead - Revert to operating out-of-place (Herbert Xu) [RHEL-172207] {CVE-2026-31431}
|
|
- crypto: af-alg - fix NULL pointer dereference in scatterwalk (Herbert Xu) [RHEL-172207]
|
|
- usbip: validate number_of_packets in usbip_pack_ret_submit() (CKI Backport Bot) [RHEL-171433] {CVE-2026-31607}
|
|
- Bluetooth: SCO: Fix use-after-free in sco_recv_frame() due to missing sock_hold (CKI Backport Bot) [RHEL-171326] {CVE-2026-31408}
|
|
- redhat/configs: enable CONFIG_SCLP_OFB for s390x (Jan Polensky) [RHEL-169810]
|
|
- scsi: storvsc: Handle PERSISTENT_RESERVE_IN truncation for Hyper-V vFC (Vitaly Kuznetsov) [RHEL-159283]
|
|
- s390/mm: Add missing secure storage access fixups for donated memory (Mete Durlu) [RHEL-168793]
|
|
- Revert "mm: pcp: increase pcp->free_count threshold to trigger free_high" (Luiz Capitulino) [RHEL-144961]
|
|
- audit: merge loops in __audit_inode_child() (Ricardo Robaina) [RHEL-145408]
|
|
- audit: Use kzalloc() instead of kmalloc()/memset() in audit_krule_to_data() (Ricardo Robaina) [RHEL-145408]
|
|
- audit: fix comment misindentation in audit.h (Ricardo Robaina) [RHEL-145408]
|
|
- audit: add a missing tab (Ricardo Robaina) [RHEL-145408]
|
|
- audit: fix typo in auditfilter.c comment (Ricardo Robaina) [RHEL-145408]
|
|
- audit: Replace deprecated strcpy() with strscpy() (Ricardo Robaina) [RHEL-145408]
|
|
- audit: fix indentation in audit_log_exit() (Ricardo Robaina) [RHEL-145408]
|
|
- audit: mark audit_log_vformat() with __printf() attribute (Ricardo Robaina) [RHEL-145408]
|
|
- auditsc: replace memcpy() with strscpy() (Ricardo Robaina) [RHEL-145408]
|
|
- audit: use fsnotify group lock helpers (Ricardo Robaina) [RHEL-145408]
|
|
- x86/kaslr: Recognize all ZONE_DEVICE users as physaddr consumers (Ricardo Robaina) [RHEL-144439]
|
|
- kaslr: rename physmem_end and PHYSMEM_END to direct_map_physmem_end (Ricardo Robaina) [RHEL-144439]
|
|
- arm64: Expose the end of the linear map in PHYSMEM_END (Ricardo Robaina) [RHEL-144439]
|
|
|
|
* Wed Apr 29 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-700.el9]
|
|
- tools/power/x86/intel-speed-select: v1.25 release (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: Fix file descriptor leak in isolate_cpus() (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: Use pkg-config for libnl-3.0 detection (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: Allow non root users (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: v1.24 release (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets (David Arcari) [RHEL-128562]
|
|
- tools/power/x86/intel-speed-select: Check feature status (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Increase minor version (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Reset core count to 0 (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Correct locked bit width (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Check HWP support before MSR access (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Optimize suspend/resume callbacks (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Check for admin capability for write commands (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Store and restore all domains data (David Arcari) [RHEL-128562]
|
|
- platform/x86: ISST: Add missing write block check (David Arcari) [RHEL-128562]
|
|
|
|
* Tue Apr 28 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-699.el9]
|
|
- redhat/configs: Enable MPAM options (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Make resctrl_mon_ctx_waiters static (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Fix the check for no monitor components found (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Add initial MPAM documentation (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Quirk CMN-650's CSU NRDY behaviour (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Add workaround for T241-MPAM-6 (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Add workaround for T241-MPAM-4 (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Add workaround for T241-MPAM-1 (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Add quirk framework (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Select ARCH_HAS_CPU_RESCTRL (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add empty definitions for assorted resctrl functions (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Update the rmid reallocation limit (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add resctrl_arch_rmid_read() (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Allow resctrl to allocate monitors (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add support for csu counters (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add monitor initialisation and domain boilerplate (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add kunit test for control format conversions (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add support for 'MB' resource (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Wait for cacheinfo to be ready (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add rmid index helpers (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add CDP emulation (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add plumbing against arm64 task and cpu hooks (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Implement helpers to update configuration (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add resctrl_arch_get_config() (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Implement resctrl_arch_reset_all_ctrls() (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Pick the caches we will use as resctrl resources (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: resctrl: Add boilerplate cpuhp and domain allocation (Gavin Shan) [RHEL-164227]
|
|
- KVM: arm64: Force guest EL1 to use user-space's partid configuration (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Add helpers to change a task or cpu's MPAM PARTID/PMG values (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Initialise and context switch the MPAMSM_EL1 register (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Add cpu_pm notifier to restore MPAM sysregs (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Advertise the CPUs MPAM limits to the driver (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Drop the CONFIG_EXPERT restriction (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Re-initialise MPAM regs when CPU comes online (Gavin Shan) [RHEL-164227]
|
|
- arm64: mpam: Context switch the MPAM registers (Gavin Shan) [RHEL-164227]
|
|
- KVM: arm64: Make MPAMSM_EL1 accesses UNDEF (Gavin Shan) [RHEL-164227]
|
|
- KVM: arm64: Preserve host MPAM configuration when changing traps (Gavin Shan) [RHEL-164227]
|
|
- arm64/sysreg: Add MPAMSM_EL1 register (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Reset when feature configuration bit unset (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Ensure in_reset_state is false after applying configuration (Gavin Shan) [RHEL-164227]
|
|
- arm_mpam: Force __iomem casts (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Disable preemption when making accesses to fake MSC in kunit test (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Fix null pointer dereference when restoring bandwidth counters (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Use non-atomic bitops when modifying feature bitmap (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Remove duplicate linux/srcu.h header (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Stop using uninitialized variables in __ris_msmon_read() (Gavin Shan) [RHEL-100931]
|
|
- MAINTAINERS: new entry for MPAM Driver (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add kunit tests for props_mismatch() (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add kunit test for bitmap reset (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add helper to reset saved mbwu state (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Use long MBWU counters if supported (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Probe for long/lwd mbwu counters (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Consider overflow in bandwidth counter state (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Track bandwidth counter state for power management (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add mpam_msmon_read() to read monitor value (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add helpers to allocate monitors (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Probe and reset the rest of the features (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Allow configuration to be applied and restored during cpu online (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Use a static key to indicate when mpam is enabled (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Register and enable IRQs (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Extend reset logic to allow devices to be reset any time (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add a helper to touch an MSC from any CPU (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Reset MSC controls from cpuhp callbacks (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Merge supported features during mpam_enable() into mpam_class (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Probe the hardware features resctrl supports (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add helpers for managing the locking around the mon_sel registers (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Probe hardware to find the supported partid/pmg values (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add cpuhp callbacks to probe MSC hardware (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add MPAM MSC register layout definitions (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add the class and component structures for firmware described ris (Gavin Shan) [RHEL-100931]
|
|
- arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate (Gavin Shan) [RHEL-100931]
|
|
- ACPI / MPAM: Parse the MPAM table (Gavin Shan) [RHEL-100931]
|
|
- ACPI: Define acpi_put_table cleanup handler and acpi_get_table_pointer() helper (Gavin Shan) [RHEL-100931]
|
|
- platform: Define platform_device_put cleanup handler (Gavin Shan) [RHEL-100931]
|
|
- arm64: kconfig: Add Kconfig entry for MPAM (Gavin Shan) [RHEL-100931]
|
|
- ACPI / PPTT: Add a helper to fill a cpumask from a cache_id (Gavin Shan) [RHEL-100931]
|
|
- ACPI / PPTT: Find cache level by cache-id (Gavin Shan) [RHEL-100931]
|
|
- ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure (Gavin Shan) [RHEL-100931]
|
|
- ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear levels (Gavin Shan) [RHEL-100931]
|
|
- ACPI / PPTT: Add a helper to fill a cpumask from a processor container (Gavin Shan) [RHEL-100931]
|
|
- cpumask: Add initialiser to use cleanup helpers (Gavin Shan) [RHEL-100931]
|
|
- ACPICA: MPAM: Correct the typo in struct acpi_mpam_msc_node member (Gavin Shan) [RHEL-100931]
|
|
- ACPICA: Add support for Arm's MPAM ACPI table version 2 (Gavin Shan) [RHEL-100931]
|
|
- platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Introduce new interface to export NPU metrics (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Prevent TEE errors after hibernate (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Use ring buffer to store custom BIOS input values (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Refactor repetitive BIOS output handling (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Replace magic table id with METRICS_TABLE_ID (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Use explicit SET_CMD/GET_CMD flags in amd_pmf_send_cmd() (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Rename IPU metrics fields to NPU for consistency (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Support new ACPI ID AMDI0108 (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Add debug logs for pending requests and custom BIOS inputs (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Call enact function sooner to process early pending requests (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Preserve custom BIOS inputs for evaluating the policies (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Add custom BIOS input support for AMD_CPU_ID_PS (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Add helper to verify BIOS input notifications are enable/disable (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Update ta_pmf_action structure member (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Extend custom BIOS inputs for more policies (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Fix the custom bios input handling mechanism (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Add support for adjusting PMF PPT and PPT APU thresholds (David Arcari) [RHEL-128575]
|
|
- platform/x86/amd/pmf: Remove redundant ternary operators (David Arcari) [RHEL-128575]
|
|
- dpll: zl3073x: Remove redundant cleanup in devm_dpll_init() (CKI Backport Bot) [RHEL-164439]
|
|
- dpll: zl3073x: fix REF_PHASE_OFFSET_COMP register width for some chip IDs (CKI Backport Bot) [RHEL-164439]
|
|
- dpll: zl3073x: Fix ref frequency setting (CKI Backport Bot) [RHEL-164439]
|
|
- dpll: zl3073x: Include current frequency in supported frequencies list (CKI Backport Bot) [RHEL-164439]
|
|
- dpll: zl3073x: Add output pin frequency helper (CKI Backport Bot) [RHEL-164439]
|
|
- ipv4: ip_gre: make ipgre_header() robust (Guillaume Nault) [RHEL-152693]
|
|
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() (Guillaume Nault) [RHEL-152693]
|
|
- erspan: Initialize options_len before referencing options. (Guillaume Nault) [RHEL-152693]
|
|
- arp: do not assume dev_hard_header() does not change skb->head (Guillaume Nault) [RHEL-152693]
|
|
- ip6_gre: make ip6gre_header() robust (Guillaume Nault) [RHEL-152693]
|
|
- net/ip6_tunnel: Prevent perpetual tunnel growth (Guillaume Nault) [RHEL-152693]
|
|
- vxlan: Handle error of rtnl_register_module(). (Guillaume Nault) [RHEL-152693]
|
|
- sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting (Herton R. Krzesinski) [RHEL-157267]
|
|
- iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show (Jerry Snitselaar) [RHEL-140473]
|
|
- redhat/configs: Enable AMD IOMMU DebugFS support (Jerry Snitselaar) [RHEL-140473]
|
|
|
|
* Mon Apr 27 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-698.el9]
|
|
- thermal: intel: intel_soc_dts_thermal: Switch to new Intel CPU model defines (David Arcari) [RHEL-128567]
|
|
- thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: soc_slider: Set offset only for balanced mode (David Arcari) [RHEL-128567]
|
|
- thermal: int340x: Fix sysfs group leak on DLVR registration failure (David Arcari) [RHEL-128567]
|
|
- drivers: thermal: intel: tcc_cooling: Drop redundant local variable (David Arcari) [RHEL-128567]
|
|
- thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature (David Arcari) [RHEL-128567]
|
|
- thermal: intel: Use sysfs_emit() in a sysfs show function (David Arcari) [RHEL-128567]
|
|
- thermal: intel: fix typo "nagative" in comment for cpu argument (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Use sysfs_emit{_at}() in sysfs show functions (David Arcari) [RHEL-128567]
|
|
- thermal: int340x: processor_thermal: Enable slow workload type hints (David Arcari) [RHEL-128567]
|
|
- thermal: intel: intel_pch_thermal: Drop explicit driver data clearing (David Arcari) [RHEL-128567]
|
|
- thermal: intel: intel_tcc_cooling: Add CPU models in the support list (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Enable power slider interface for Wildcat Lake (David Arcari) [RHEL-128567]
|
|
- powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers (David Arcari) [RHEL-128567]
|
|
- ACPI: DPTF: Support Nova Lake (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Add DLVR support for Nova Lake (David Arcari) [RHEL-128567]
|
|
- thermal: int340x: processor_thermal: Add Nova Lake processor thermal device (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Replace sprintf() with sysfs_emit() (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Use symbolic constant for UUID comparison (David Arcari) [RHEL-128567]
|
|
- thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Power Slider: Validate slider_balance range (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Add module parameter to change slider offset (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Add module parameter for balanced Slider (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Enable power slider interface for Panther Lake (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Add support for power slider (David Arcari) [RHEL-128567]
|
|
- thermal: intel: int340x: Remove redundant acpi_has_method() call (David Arcari) [RHEL-128567]
|
|
- x86/msr: Rename 'wrmsrl_safe()' to 'wrmsrq_safe()' [partial] (David Arcari) [RHEL-128567]
|
|
- x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()' [partial] (David Arcari) [RHEL-128567]
|
|
- x86/msr: Rename 'wrmsrl()' to 'wrmsrq()' [partial] (David Arcari) [RHEL-128567]
|
|
- x86/msr: Rename 'rdmsrl()' to 'rdmsrq()' [partial] (David Arcari) [RHEL-128567]
|
|
- x86/msr: Rename 'wrmsrl_on_cpu()' to 'wrmsrq_on_cpu()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'rdmsrl_on_cpu()' to 'rdmsrq_on_cpu()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'wrmsrl_safe_on_cpu()' to 'wrmsrq_safe_on_cpu()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'rdmsrl_safe_on_cpu()' to 'rdmsrq_safe_on_cpu()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'wrmsrl()' to 'wrmsrq()' [partial] (David Arcari) [RHEL-128563]
|
|
- x86/msr: Rename 'rdmsrl()' to 'rdmsrq()' [partial] (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Add static asserts for EPP indices (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Fix some whitespace issues (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status() (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULL (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_string (David Arcari) [RHEL-128563]
|
|
- cpufreq/amd-pstate: Use sysfs_match_string() for epp (David Arcari) [RHEL-128563]
|
|
- crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id (CKI Backport Bot) [RHEL-169569] {CVE-2025-68724}
|
|
- Documentation/powerpc: update fadump implementation details (Mamatha Inamdar) [RHEL-138954]
|
|
- powerpc/fadump: add hotplug_ready sysfs interface (Mamatha Inamdar) [RHEL-138954]
|
|
- powerpc: make fadump resilient with memory add/remove events (Mamatha Inamdar) [RHEL-138954]
|
|
- sfc: add transmit timestamping support (Izabela Bakollari) [RHEL-74331]
|
|
- wifi: ath10k: fix station lookup failure during disconnect (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cw1200: add WQ_PERCPU to alloc_workqueue users (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: correct use sequence of driver_data in skb->info (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mvm: pause TCM on fast resume (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: cancel mlo_scan_start_wk (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: correctly decode TTLM with default link map (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: ignore link disabled flag from userspace (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: apply advertised TTLM from association response (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: parse all TTLM entries (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: don't increment crypto_tx_tailroom_needed_cnt twice (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: don't perform DA check on S1G beacon (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Fix wrong P2P device link id issue (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix dead lock while flushing management frames (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Fix scan state stuck in ABORTING after cancel_remain_on_channel (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: cancel scan only on active scan vdev (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mwifiex: Fix a loop in mwifiex_update_ampdu_rxwinsize() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: correctly check if CSA is active (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: Fix bitrate calculation overflow for HE rates (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: don't force radio frequency check in freq_to_idx() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix dma_free_coherent() pointer (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath10k: fix dma_free_coherent() pointer (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: collect station statistics earlier when disconnect (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: restore non-chanctx injection behaviour (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: don't iterate not running interfaces (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: avoid kernel-infoleak from struct iw_point (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Remove blank line after mt792x firmware version dmesg (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- Revert "wifi: mt76: Strip whitespace from build ddate" (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: Implement settime64 as stub for MVM/MLD PTP (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: ocb: skip rx_no_sta when interface is not joined (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: do not use old MBSSID elements (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: don't WARN for connections on invalid channels (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: sme: store capped length in __cfg80211_connect_result() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: fix list iteration in ieee80211_add_virtual_monitor() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: Discard Beacon frames to non-broadcast address (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- Revert "wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users" (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: allow sharing identical chanctx for S1G interfaces (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: include s1g_primary_2mhz when comparing chandefs (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: include s1g_primary_2mhz when sending chandef (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: correct FILS status codes (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt792x: fix wifi init fail by setting MCU_RUNNING after CLC load (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Strip whitespace from build ddate (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: skip ieee80211_iter_keys() on scanning link remove (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: skip deflink accounting for offchannel links (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: move mt7996_update_beacons under mt76 mutex (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware. (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix MLO set key and group key issues (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix MLD group index assignment (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: use correct link_id when filling TXD and TXP (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: set link_valid field when initializing wcid (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix teardown command for an MLD peer (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix several fields in mt7996_mcu_bss_basic_tlv() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: support fixed rate for link station (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix implicit beamforming support for mt7992 (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: no need to wait ACK event for SDO command (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix max nss value when getting rx chainmask (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7925: cqm rssi low/high event notify (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: adjust BSS conf pointer handling (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- Revert "wifi: mt76: mt792x: improve monitor interface handling" (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mmio_*_copy fix byte order and alignment (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Use of_reserved_mem_region_to_resource() for "memory-region" (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix typos in comments (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Add the capability to set TX token start ID (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Add mt76_dev pointer in mt76_queue struct. (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Move Q_READ/Q_WRITE definitions in dma.h (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: Remove useless check in mt7996_msdu_page_get_from_cache() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: relicense to BSD-3-Clause-Clear (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: fix license/copyright of util.h (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: use GFP_DMA32 for page_pool buffer allocation (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7915: add bf backoff limit table support (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: Fix DTS power-limits on little endian systems (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: connac: Replace memcpy + hard-coded size with strscpy (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: Remove unnecessary link_id checks in mt7996_tx (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mt76: mt7996: fix null pointer deref in mt7996_conf_tx() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: brcmfmac: Add DMI nvram filename quirk for Acer A1 840 tablet (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: stop radar detection in cfg80211_leave() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: use cfg80211_leave() in iftype change (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: fix channel switching code (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Enable 40 MHz width by default (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Fix RX channel width reported by RTL8192FU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Fix the 40 MHz subchannel for RTL8192EU, RTL8723BU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Make RTL8192CU, RTL8723AU TX with 40 MHz width (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Fix HT40 channel config for RTL8192CU, RTL8723AU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852a: correct field mask of reset DAC/ADC FIFO (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw88: add WQ_UNBOUND to alloc_workqueue users (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtlwifi: add WQ_UNBOUND to alloc_workqueue users (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: refactor CMAC packet handlers (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: refactor CMAC crypt functions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: utilize the newly defined CMAC constants (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: add generic MMIE struct defines (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: fix CMAC functions not handling errors (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: Add support for 6GHz AP role not relevant AP type (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add default ID 0bda:b831 for RTL8831BU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: use separated function to set RX filter (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: correct user macid mask of RX info for RTL8922D (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: update format of addr cam H2C command (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: add addr cam H2C command v1 (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: fill addr cam H2C command by struct (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: align RA H2C format v1 for RTL8922A (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: fw: print band and port where beacon update on (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: phy: ignore DCFO if not defined in chip_info (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: phy: consider type 15 in BB gain table (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: mac: update wcpu_on to download firmware for RTL8922D (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: mac: remove undefined bit B_BE_PPDU_MAC_INFO (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: phy: calling BB pre-init by chips with/without BB MCU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: mac: separate pre-init code before downloading firmware (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: fw: part size to download firmware by header info (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: flush TX queue before deleting key (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: rtw8852bu: Added dev id for ASUS AX57 NANO USB Wifi dongle (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: configure RX antenna if chips can support (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: do RF calibration once setting channel when running pure monitor mode (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: consider data rate/bandwidth/GI for injected packets (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: phy: fix out-of-bounds access in rtw89_phy_read_txpwr_limit() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852c: add compensation of thermal value from efuse calibration (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: debug: add parser to diagnose along DIAG_MAC fw element (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: fw: parse firmware element of DIAG_MAC (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: pci: add to read PCI configuration space from common code (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: make monitor link info check more specific (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: track MU-MIMO configuration on disabled interfaces (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211/mac80211: Add fallback mechanism for INDOOR_SP connection (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211/mac80211: clean up duplicate ap_power handling (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: use a C99 initializer in wiphy_register (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtlwifi: rtl8188ee: correct allstasleep in P2P PS H2C command (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Enable the new rtw89_8852au module (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852au.c (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852a: Accept USB devices and load their MAC address (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852a_hfc_param_ini_usb (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852a_dle_mem_usb (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Use the correct power sequences for USB/SDIO (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: fix doc of struct key_params (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: remove unnecessary vlan NULL check (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: pass frame type to element parsing (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: remove "disabling VHT" message (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: add and use chanctx usage iteration (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: simplify ieee80211_recalc_chanctx_min_def() API (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: remove chanctx to link back-references (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: make link iteration safe for 'break' (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: fix EHT typo (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: fix EHT typo (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split NAN definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split P2P definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split S1G definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split EHT definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split HE definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split VHT definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split HT definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ieee80211: split mesh definitions out (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Fix timeout error during beacon stats retrieval (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Make firmware stats reset caller-driven (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: process TX wait skbs for USB via C2H handler (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: provide TX reports for management frames (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: handle IEEE80211_TX_CTL_REQ_TX_STATUS frames for USB (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: anchor TX URBs (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: fill TX descriptor of FWCMD in shortcut (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: implement C2H TX report handler (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: refine rtw89_core_tx_wait_complete() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: use ieee80211_free_txskb() where appropriate (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: fix leak in rtw89_usb_write_port() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: use common error path for skbs in rtw89_usb_rx_handler() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw88: Add BUFFALO WI-U3-866DHP to the USB ID list (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw88: 8822c: use fixed rate and bandwidth to reply CSI packets (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Enable the new rtw89_8852cu module (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852cu.c (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852c: Accept USB devices and load their MAC address (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852c_hfc_param_ini_usb (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw8852c_dle_mem_usb{2,3} (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852c: Fix rtw8852c_pwr_{on,off}_func() for USB (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Fix rtw89_mac_dmac_func_pre_en_ax() for USB/SDIO (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_post_init() for RTL8852CU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: Prepare rtw89_usb_ops_mac_pre_init() for RTL8852CU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: usb: Move bulk out map to new struct rtw89_usb_info (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Add rtw89_core_get_ch_dma_v2() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8832cu: turn off TX partial mode (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath10k: use = {} to initialize bmi_target_info instead of memset (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath10k: use = {} to initialize pm_qos_request instead of memset (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: unassign arvif on scan vdev create failure (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: enforce vdev limit in ath12k_mac_vdev_create() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Set EHT fixed rates for associated STAs (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: add EHT rates to ath12k_mac_op_set_bitrate_mask() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Add EHT fixed GI/LTF (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Add EHT MCS/NSS rates to Peer Assoc (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: add EHT rate handling to existing set rate functions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: generalize GI and LTF fixed rate functions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix error handling in creating hardware group (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix reusing m3 memory (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix potential memory leak in ath12k_wow_arp_ns_offload() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: Allow HT Action frame processing on 6 GHz when HE is supported (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rt2x00: add nvmem eeprom support (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: add RX flag to report radiotap VHT information (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: add null check for kzalloc() in iwl_mld_send_proto_offload() (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: check for NULL pointer after kmalloc (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: cfg: fix a few device names (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: Move EMLSR prints to IWL_DL_EHT (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: disable EHT if the device doesn't allow it (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: bump core version for BZ/SC/DR (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: use FW_CHECK on bad ROC notification (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mvm/mld: report non-HT frames as 20 MHz (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: bump core version for BZ/SC/DR (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: fix build when mvm/mld not configured (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: check the validity of noa_len (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: stop checking the firmware's error pointer (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: be more chatty when we fail to find a wifi7 device (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: fw: remove support of several iwl_lari_config_change_cmd versions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: include raw PHY notification in radiotap (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: update to new sniffer API (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: set wiphy::iftype_ext_capab dynamically (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: support get/set_antenna (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mvm: cleanup unsupported phy command versions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: fix remaining kernel-doc warnings (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: tests: check listed PCI IDs have configs (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: cfg: add new device names (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: iwlmld is always used for wifi7 devices (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mvm: move rate conversions to utils.c (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: reschedule check_tpt_wk also not in EMLSR (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: mld: remove support from of alive notif version 6 (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: iwlwifi: align the name of iwl_alive_ntf_v6 to the convention (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: improve scan time on 6 GHz band (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: restart hardware to recover firmware if power-save becomes abnormal (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: 8852c: fix ADC oscillation in 160MHz affecting RX performance (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: regd: apply ACPI policy even if country code is programmed (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: support EHT rate pattern via bitrate mask (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: mlo: handle needed H2C when link switching is requested by stack (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: use skb_dequeue() for queued ROC packets to prevent racing (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: splice C2H events queue to local to prevent racing (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: Add parameters to radio-specific debugfs directories (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: Add debugfs support for multi-radio wiphy (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: fix missing RX bitrate update for mesh forwarding path (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211: default S1G chandef width to 1MHz (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: get probe response chan via ieee80211_get_channel_khz (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211: reset CRC valid after CSA (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: mac80211_hwsim: advertise puncturing feature support (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: cfg80211/mac80211: validate radio frequency range for monitor mode (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rt2x00: check retval for of_get_mac_address (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Assert base_lock is held before allocating REO update element (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: restore register window after global reset (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: add support for BSS color change (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: Correctly use "ab" macro parameter (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: advertise NL80211_FEATURE_TX_POWER_INSERTION (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: add support for Tx Power insertion in RRM action frame (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: wrap ath11k_mac_op_get_txpower() with lock-aware internal helper (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: relocate some Tx power related functions in mac.c (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: fix peer HE MCS assignment (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: fix VHT MCS assignment (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath10k: Support for FTM TLV test commands (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Use correct power off sequence for RTL8192CU (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Dump the efuse right after reading it (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Report the signal strength only if it's known (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw89: Replace hardcoded strings with helper functions (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtw88: Add USB ID 2001:3329 for D-Link AC13U rev. A1 (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: rtl8xxxu: Add USB ID 2001:3328 for D-Link AN3U rev. A1 (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Add MODULE_FIRMWARE() entries (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix TX and RX MCS rate configurations in HE mode (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: fix VHT MCS assignment (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Fix NSS value update in ext_rx_stats (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: track dropped MSDU buffer type packets in REO exception ring (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Fix MSDU buffer types handling in RX error path (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: restore register window after global reset (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath12k: Remove struct wmi_bcn_send_from_host_cmd (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath11k: Remove struct wmi_bcn_send_from_host_cmd (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- wifi: ath10k: move recovery check logic into a new work (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- config: wifi: disable new unsupported configuration options (Jose Ignacio Tornos Martinez) [RHEL-163622]
|
|
- bus: mhi: host: pci_generic: Add Foxconn T99W760 modem (Jose Ignacio Tornos Martinez) [RHEL-163621]
|
|
- bus: mhi: ep: add WQ_PERCPU to alloc_workqueue users (Jose Ignacio Tornos Martinez) [RHEL-163621]
|
|
- bus: mhi: host: pci_generic: Add Telit FE990B40 modem support (Jose Ignacio Tornos Martinez) [RHEL-163621]
|
|
- bus: mhi: ep: Make mhi_ep_bus_type const (Jose Ignacio Tornos Martinez) [RHEL-163621]
|
|
|
|
* Wed Apr 22 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-697.el9]
|
|
- x86/resctrl: Fix memory bandwidth counter width for Hygon (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add missing resctrl initialization for Hygon (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Update documentation for telemetry events (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Enable RDT_RESOURCE_PERF_PKG (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Move RMID initialization to first mount (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Compute number of RMIDs as minimum across resources (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Move allocation/free of closid_num_dirty_rmid[] (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Handle number of RMIDs supported by RDT_RESOURCE_PERF_PKG (Gavin Shan) [RHEL-163713]
|
|
- selftests/resctrl: Fix non-contiguous CBM check for Hygon (Gavin Shan) [RHEL-163713]
|
|
- selftests/resctrl: Add CPU vendor detection for Hygon (Gavin Shan) [RHEL-163713]
|
|
- selftests/resctrl: Define CPU vendor IDs as bits to match usage (Gavin Shan) [RHEL-163713]
|
|
- selftests/resctrl: Fix a division by zero error on Hygon (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add energy/perf choices to rdt boot option (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Refactor rmdir_mondata_subdir_allrdtgrp() (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Refactor mkdir_mondata_subdir() (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Read telemetry events (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Find and enable usable telemetry events (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Add architectural event pointer (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Fill in details of events for performance and energy GUIDs (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Discover hardware telemetry events (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Emphasize that L3 monitoring resource is required for summing domains (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Add and initialize a resource for package scope monitoring (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Add an architectural hook called for first mount (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Support binary fixed point event counters (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Handle events that can be read from any CPU (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Make event details accessible to functions when reading events (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Rename some L3 specific functions (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Rename struct rdt_mon_domain and rdt_hw_mon_domain (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Use struct rdt_domain_hdr when reading counters (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Split L3 dependent parts out of __mon_event_count() (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Refactor domain create/remove using struct rdt_domain_hdr (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Clean up domain_remove_cpu_ctrl() (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Refactor domain_remove_cpu_mon() ready for new domain types (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Move L3 initialization into new helper function (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Improve domain type checking (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Update bit_usage to reflect io_alloc (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce interface to display io_alloc CBMs (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Add user interface to enable/disable io_alloc feature (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce interface to display "io_alloc" support (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Implement "io_alloc" enable/disable handlers (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Detect io_alloc feature (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add SDCIAE feature in the command line options (Gavin Shan) [RHEL-163713]
|
|
- x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Consider sparse masks when initializing new group's allocation (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled (Gavin Shan) [RHEL-163713]
|
|
- MAINTAINERS: resctrl: Add myself as reviewer (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Configure mbm_event mode if supported (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce the interface to switch between monitor modes (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce the interface to modify assignments in a group (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Auto assign counters on mkdir and clean up on group removal (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Provide interface to update the event configurations (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Add event configuration directory under info/L3_MON/ (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Support counter read/reset with mbm_event assignment mode (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Pass struct rdtgroup instead of individual members (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Add the functionality to unassign MBM events (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Add the functionality to assign MBM events (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce event configuration field in struct mon_evt (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add data structures and definitions for ABMC assignment (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce interface to display number of free MBM counters (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce mbm_cntr_cfg to track assignable counters per domain (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Add resctrl file to display number of assignable counters (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Introduce the interface to display monitoring modes (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add support to enable/disable AMD ABMC feature (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Detect Assignable Bandwidth Monitoring feature details (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Consolidate monitoring related data from rdt_resource (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Add ABMC feature in the command line options (Gavin Shan) [RHEL-163713]
|
|
- x86/cpufeatures: Add support for Assignable Bandwidth Monitoring Counters (ABMC) (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Prepare for more monitor events (Gavin Shan) [RHEL-163713]
|
|
- x86/resctrl: Remove the rdt_mon_features global variable (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Replace architecture event enabled checks (Gavin Shan) [RHEL-163713]
|
|
- x86,fs/resctrl: Consolidate monitor event descriptions (Gavin Shan) [RHEL-163713]
|
|
- fs/resctrl: Optimize code in rdt_get_tree() (Gavin Shan) [RHEL-163713]
|
|
- Documentation: Fix filesystems typos (Gavin Shan) [RHEL-163713]
|
|
- Prevent stripping of rtla and rv binaries during install (John Kacur) [RHEL-85867 RHEL-96913]
|
|
- Fix rtla and rv debuginfo package definitions (John Kacur) [RHEL-85867 RHEL-96913]
|
|
- Add debuginfo package for rtla tool (John Kacur) [RHEL-85867 RHEL-96913]
|
|
- Add debuginfo package for rv tool (John Kacur) [RHEL-85867 RHEL-96913]
|
|
|
|
* Tue Apr 21 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-696.el9]
|
|
- mm/page_alloc: add vm.thp_thisnode_reclaim sysctl to allow THP reclaim on local node (Nico Pache) [RHEL-148561]
|
|
- mm/page_alloc: simplify __alloc_pages_slowpath() flow (Nico Pache) [RHEL-148561]
|
|
- mm/page_alloc: refactor the initial compaction handling (Nico Pache) [RHEL-148561]
|
|
- mm/page_alloc: ignore the exact initial compaction result (Nico Pache) [RHEL-148561]
|
|
- mm, page_alloc, thp: prevent reclaim for __GFP_THISNODE THP allocations (Nico Pache) [RHEL-148561]
|
|
- mm/page_alloc.c: avoid infinite retries caused by cpuset race (Nico Pache) [RHEL-148561]
|
|
- mm: warn about illegal __GFP_NOFAIL usage in a more appropriate location and manner (Nico Pache) [RHEL-148561]
|
|
- mm: document __GFP_NOFAIL must be blockable (Nico Pache) [RHEL-148561]
|
|
- KVM: arm64: Discard PC update state on vcpu reset (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Fix vma_shift staleness on nested hwpoison path (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: nv: Report addrsz fault at level 0 with a bad VTTBR.BADDR (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: nv: Check S2 limits based on implemented PA size (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: pkvm: Fallback to level-3 mapping on host stage-2 fault (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Eagerly init vgic dist/redist on vgic creation (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: nv: Add trap config for DBGWCR<15>_EL1 (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Fix Trace Buffer trapping for protected VMs (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Fix EL2 S1 XN handling for hVHE setups (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Move pagetable definitions to common header (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Remove ISB after writing FPEXC32_EL2 (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Fix comment in fpsimd_lazy_switch_to_host() (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Use kvzalloc() for kvm struct allocation (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Drop useless __GFP_HIGHMEM from kvm struct allocation (Eric Auger) [RHEL-154746]
|
|
- KVM: arm64: Prevent access to vCPU events before init (Eric Auger) [RHEL-154746]
|
|
|
|
* Thu Apr 16 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-695.el9]
|
|
- iommu/ipmmu-vmsa: fix device leak on of_xlate() (Jerry Snitselaar) [RHEL-147906]
|
|
- of/device: Fix up of_dma_configure_id() stub (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/tegra: fix device leak on probe_device() (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD (Jerry Snitselaar) [RHEL-147906]
|
|
- lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets (Jerry Snitselaar) [RHEL-147906]
|
|
- dma-mapping: benchmark: Restore padding to ensure uABI remained consistent (Jerry Snitselaar) [RHEL-147906]
|
|
- dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings (Jerry Snitselaar) [RHEL-147906]
|
|
- dma/pool: eliminate alloc_pages warning in atomic_pool_expand (Jerry Snitselaar) [RHEL-147906]
|
|
- dma/pool: distinguish between missing and exhausted atomic pools (Jerry Snitselaar) [RHEL-147906]
|
|
- iommufd: Make vfio_compat's unmap succeed if the range is already empty (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Flush piotlb for SVM and Nested domain (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Flush cache for PASID table before using it (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/io-pgtable-arm: fix size_t signedness bug in unmap path (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Remove IAS (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/amd: Use core's primary handler and set IRQF_ONESHOT (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/amd: Fix pci_segment memleak in alloc_pci_segment() (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga() (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/amd: Fix error path in amd_iommu_probe_device() (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/amd: Block identity domain when SNP enabled (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: PRS isn't usable if PDS isn't supported (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Only handle IOPF for SVA when PRI is supported (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Fix intel iommu iotlb sync hardlockup and retry (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Fix race condition during PASID entry replacement (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Clear Present bit before tearing down context entry (Jerry Snitselaar) [RHEL-147906]
|
|
- iommu/vt-d: Clear Present bit before tearing down PASID entry (Jerry Snitselaar) [RHEL-147906]
|
|
- selftests: net: check jq command is supported (Guillaume Nault) [RHEL-146140]
|
|
- selftests: rtnetlink: Fix do_test_address_proto() (Guillaume Nault) [RHEL-146140]
|
|
- selftests: rtnetlink: Add an address proto test (Guillaume Nault) [RHEL-146140]
|
|
- net: ipv4: Allow changing IPv4 address protocol (Guillaume Nault) [RHEL-146140]
|
|
- net: Add new protocol attribute to IP addresses (Guillaume Nault) [RHEL-146140]
|
|
- l2tp: do not use sock_hold() in pppol2tp_session_get_sock() (Guillaume Nault) [RHEL-152688]
|
|
- ppp: fix race conditions in ppp_fill_forward_path (Guillaume Nault) [RHEL-152688]
|
|
|
|
* Wed Apr 15 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-694.el9]
|
|
- powerpc/tools: drop `-o pipefail` in gcc check scripts (Jan Stancek) [RHEL-165107]
|
|
- Documentation/rtla: Document --bpf-action option (Tomas Glozar) [RHEL-153391]
|
|
- Documentation/rtla: Rename sample/ to example/ (Tomas Glozar) [RHEL-153391]
|
|
- rtla/tests: Run Test::Harness in verbose mode (Tomas Glozar) [RHEL-153391]
|
|
- rtla/tests: Test BPF action program (Tomas Glozar) [RHEL-153391]
|
|
- rtla/timerlat: Add example for BPF action program (Tomas Glozar) [RHEL-153391]
|
|
- rtla/timerlat: Add --bpf-action option (Tomas Glozar) [RHEL-153391]
|
|
- rtla/timerlat: Support tail call from BPF program (Tomas Glozar) [RHEL-153391]
|
|
- tools/power turbostat: Allow execution to continue after perf_l2_init() failure (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix delimiter bug in print functions (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix --show/--hide for individual cpuidle counters (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix incorrect format variable (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Consistently use print_float_value() (David Arcari) [RHEL-128571]
|
|
- tools/power/turbostat: Fix microcode patch level output for AMD/Hygon (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Eliminate unnecessary data structure allocation (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix swidle header vs data display (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix illegal memory access when SMT is present and disabled (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix AMD RAPL regression (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: version 2026.02.14 (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Fix and document --header_iterations (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Use strtoul() for iteration parsing (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Favor cpu# over core# (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Expunge logical_cpu_id (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Enhance HT enumeration (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Simplify global core_id calculation (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Unify even/odd/average counter referencing (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Allocate average counters dynamically (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Delete core_data.core_id (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Rename physical_core_id to core_id (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Cleanup package_id (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Cleanup internal use of "base_cpu" (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Add L2 cache statistics (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Remove redundant newlines from err(3) strings (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Allow more use of is_hybrid flag (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Rename "LLCkRPS" column to "LLCMRPS" (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat.8: Document the "--force" option (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Harden against unexpected values (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Dump hypervisor name (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Dump CPUID.1.ECX[31] (Hypervisor) (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Dump CPUID(1) consistently with CPUID(6) (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: AMD: msr offset 0x611 read failed: Input/output error (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: version 2025.12.02 (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Print wide names only for RAW 64-bit columns (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Print percentages in 8-columns (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Print "nan" for out of range percentages (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Enhance perf probe (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Validate RAPL MSRs for AWS Nitro Hypervisor (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Add run-time MSR driver probe (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Set per_cpu_msr_sum to NULL after free (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Add LLC stats (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Remove dead code (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Refactor floating point printout code (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat.8: Update example (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Refactor added-counter value printing code (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Refactor added column header printing (David Arcari) [RHEL-128571]
|
|
- tools/power turbostat: Regression fix Uncore MHz printed in hex (David Arcari) [RHEL-128571]
|
|
|
|
* Mon Apr 13 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-693.el9]
|
|
- x86/msr: Rename 'wrmsrl_on_cpu()' to 'wrmsrq_on_cpu()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'rdmsrl_on_cpu()' to 'rdmsrq_on_cpu()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'wrmsrl_safe_on_cpu()' to 'wrmsrq_safe_on_cpu()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'rdmsrl_safe_on_cpu()' to 'rdmsrq_safe_on_cpu()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'wrmsrl_safe()' to 'wrmsrq_safe()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'wrmsrl()' to 'wrmsrq()' [partial] (David Arcari) [RHEL-128565]
|
|
- x86/msr: Rename 'rdmsrl()' to 'rdmsrq()' [partial] (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel-hid: disable wakeup_mode during hibernation (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel-hid: Enable 5-button array on ThinkPad X1 Fold 16 Gen 1 (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel-hid: Add Dell 16 Plus 2-in-1 to dmi_vgbs_allow_list (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel-hid: Add Dell 14 Plus 2-in-1 to dmi_vgbs_allow_list (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks (David Arcari) [RHEL-128565]
|
|
- platform/x86: int0002: Remove IRQF_ONESHOT from request_irq() (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/tpmi/plr: Make the file domain<n>/status writeable (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel_telemetry: Fix PSS event register mask (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel_telemetry: Fix swapped arrays in PSS output (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/vsec: Add Nova Lake PUNIT support (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmc: Remove double empty line (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmc: Enable substate residencies for multiple PMCs (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmc: Move LPM mode attributes to PMC (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmc: Change LPM mode fields to u8 (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/uncore-freq: Replace sprintf() with sysfs_emit() (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/uncore-freq: Replace sprintf() with scnprintf() (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmt/discovery: use valid device pointer in dev_err_probe (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/pmt: Fix kobject memory leak on init failure (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel/pmt: Replace sprintf() with sysfs_emit() (David Arcari) [RHEL-128565]
|
|
- platform/x86: intel: punit_ipc: fix memory corruption (David Arcari) [RHEL-128565]
|
|
- New configs in drivers/platform (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel: Introduce Intel Elkhart Lake PSE I/O (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos (David Arcari) [RHEL-128565]
|
|
- platform/x86/intel/hid: Add Nova Lake support (David Arcari) [RHEL-128565]
|
|
- gfs2: Clean up SDF_JOURNAL_LIVE flag handling (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: No longer thaw filesystems during a withdraw (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: gfs2_freeze_unlock cleanup (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Refcounting fix in gfs2_thaw_super (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Minor gfs2_{freeze,thaw}_super cleanup (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Withdraw immediately in gfs2_trans_add_meta (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: New gfs2_withdraw_helper (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Clean up properly during a withdraw (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Rename gfs2_{gl_dq_holders => withdraw_glocks} (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: fix infinite loop when checking ail item count before go_inval" (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Allow some glocks to be used during withdraw" (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Check for log write errors before telling dlm to unlock" (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: fix a deadlock on withdraw-during-mount" (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (6/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (5/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (4/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (3/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (2/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: Force withdraw to replay journals and wait for it to finish" (1/6) (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Follow-up to flag rename in sysfs status file (Andreas Gruenbacher) [RHEL-65700]
|
|
- Revert "gfs2: don't stop reads while withdraw in progress" (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Rename LM_FLAG_{NOEXP -> RECOVER} (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Kill gfs2_io_error_bh_wd (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Withdraw immediately on log write errors (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Rename gfs2_{withdrawing_or_ => }withdrawn (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Fix freeze consistency check in log_write_header (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Get rid of delayed withdraws (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Fix usage of bio->bi_status in gfs2_end_log_write (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Asynchronous withdraw (Andreas Gruenbacher) [RHEL-65700]
|
|
- gfs2: Add clean argument to lm_unmount hook (Andreas Gruenbacher) [RHEL-65700]
|
|
|
|
* Thu Apr 09 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-692.el9]
|
|
- l2tp: avoid one data-race in l2tp_tunnel_del_work() (Guillaume Nault) [RHEL-152697]
|
|
- l2tp: reset skb control buffer on xmit (Guillaume Nault) [RHEL-152697]
|
|
- gpu: host1x: Add MLOCK recovery for rest of engines (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI/IOV: Allow drivers to control VF BAR size (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI/IOV: Check that VF BAR fits within the reservation (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI/IOV: Allow IOV resources to be resized in pci_resize_resource() (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI/IOV: Add pci_resource_num_to_vf_bar() to convert VF BAR number to/from IOV resource (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI/IOV: Restore VF resizable BAR state after reset (Anusha Srivatsa) [RHEL-158926]
|
|
- PCI: Cache offset of Resizable BAR capability (Anusha Srivatsa) [RHEL-158926]
|
|
- workqueue: Add system_percpu_wq and system_dfl_wq (Anusha Srivatsa) [RHEL-158926]
|
|
- gpio: tegra186: Support multi-socket devices (Charles Mirabile) [RHEL-151652]
|
|
- gpio: tegra186: Simplify GPIO line name prefix handling (Charles Mirabile) [RHEL-151652]
|
|
- redhat/configs: Enable additional RV monitors on debug kernels (Gabriele Monaco) [RHEL-116707]
|
|
- redhat/configs: Enable sched and rtapp RV monitors (Gabriele Monaco) [RHEL-116707]
|
|
- rv: Replace non-existing rt_or_dl_task() in ltl monitors (Gabriele Monaco) [RHEL-116707]
|
|
- rv: Fix wrong arguments to __assign_str() in tracepoints (Gabriele Monaco) [RHEL-116707]
|
|
- perf test: Ensure lock contention using pipe mode (Michael Petlan) [RHEL-141682]
|
|
- perf sched timehist: decode process names of processes in zombie state (Anubhav Shelat) [RHEL-33442]
|
|
|
|
* Mon Apr 06 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-691.el9]
|
|
- kabi: enable check-kabi (Čestmír Kalina) [RHEL-153672]
|
|
- kabi: add symbols to stablelist (Čestmír Kalina) [RHEL-153672]
|
|
- RDMA/umad: Reject negative data_len in ib_umad_write (CKI Backport Bot) [RHEL-156878] {CVE-2026-23243}
|
|
- net/mlx5: Fix ECVF vports unload on shutdown flow (CKI Backport Bot) [RHEL-154538] {CVE-2025-38109}
|
|
- iavf: fix PTP use-after-free during reset (Petr Oros) [RHEL-112567]
|
|
- mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure (Audra Mitchell) [RHEL-150478] {CVE-2026-23144}
|
|
- ixgbevf: add missing negotiate_features op to Hyper-V ops table (CKI Backport Bot) [RHEL-155365]
|
|
- libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing (Ilya Dryomov) [RHEL-155611]
|
|
- libceph: add support for CEPH_CRYPTO_AES256KRB5 (Ilya Dryomov) [RHEL-155611]
|
|
- libceph: introduce ceph_crypto_key_prepare() (Ilya Dryomov) [RHEL-155611]
|
|
- libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen() (Ilya Dryomov) [RHEL-155611]
|
|
- libceph: define and enforce CEPH_MAX_KEY_LEN (Ilya Dryomov) [RHEL-155611]
|
|
- libceph: Remove unused ceph_crypto_key_encode (Ilya Dryomov) [RHEL-155611]
|
|
- redhat/configs: disable CONFIG_CRYPTO_KRB5_SELFTESTS (Ilya Dryomov) [RHEL-155611]
|
|
- redhat/configs: enable CONFIG_CRYPTO_KRB5[ENC] (Ilya Dryomov) [RHEL-155611]
|
|
- crypto: krb5 - Fix memory leak in krb5_test_one_prf() (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Fix change to use SG miter to use offset (Ilya Dryomov) [RHEL-155611]
|
|
- crypto: krb5 - Use SG miter instead of doing it by hand (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement crypto self-testing (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the Camellia enctypes from rfc6803 (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the AES enctypes from rfc8009 (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the AES enctypes from rfc3962 (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the Kerberos5 rfc3961 get_mic and verify_mic (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the Kerberos5 rfc3961 encrypt and decrypt functions (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Provide RFC3961 setkey packaging functions (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement the Kerberos5 rfc3961 key derivation (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Provide infrastructure and key derivation (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Add an API to perform requests (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Add an API to alloc and prepare a crypto object (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Add an API to query the layout of the crypto section (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Implement Kerberos crypto core (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Add some constants out of sunrpc headers (Ilya Dryomov) [RHEL-155611]
|
|
- crypto/krb5: Test manager data (Ilya Dryomov) [RHEL-155611]
|
|
- crypto: Add 'krb5enc' hash and cipher AEAD algorithm (Ilya Dryomov) [RHEL-155611]
|
|
- ice: Fix PTP NULL pointer dereference during VSI rebuild (CKI Backport Bot) [RHEL-150246] {CVE-2026-23210}
|
|
- smb: client: fix oops due to uninitialised var in smb2_unlink() (Paulo Alcantara) [RHEL-154396]
|
|
- wifi: mac80211_hwsim: fix typo in frequency notification (CKI Backport Bot) [RHEL-148653] {CVE-2026-23040}
|
|
- gfs2: bufdata allocation race (Andreas Gruenbacher) [RHEL-159333]
|
|
- gfs2: Remove trans_drain code duplication (Andreas Gruenbacher) [RHEL-159333]
|
|
- gfs2: Move gfs2_remove_from_journal to log.c (Andreas Gruenbacher) [RHEL-159333]
|
|
- gfs2: Get rid of gfs2_log_[un]lock helpers (Andreas Gruenbacher) [RHEL-159333]
|
|
- smb: client: fix krb5 mount with username option (Paulo Alcantara) [RHEL-156455]
|
|
- ALSA: update RHEL kconfigs for 6.19 upstream code (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Fix fragmentation regression in firmware download (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1011: Use component to get the dapm context in spk_mode_put (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: skylake: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- Revert "ALSA: usb: Increase volume range that triggers a warning" (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add allocation failure check for Entity name (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: cs35l56: Remove unnecessary struct cs_dsp_client_ops (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Enable headset mic for Acer Nitro 5 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs4271: Fix resource leak in cs4271_soc_resume() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: fix memory leak in acp3x pdm dma ops (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23190}
|
|
- ALSA: usb-audio: fix broken logic in snd_audigy2nx_led_update() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rt1320: fix intermittent no-sound issue (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: use hdev->info.link_mask directly (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: drop DSP responses for closed data streams (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: yc: Add quirk for HP 200 G2a 16 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs42l43: Correct handling of 3-pole jack load detection (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_es8336: Add DMI quirk for Huawei BOD-WXX9 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2 (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add quirk for Inspur S14-G1 (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU. (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek - fixed speaker no sound (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Book 9i 13IRU8 audio (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add quirk for Samsung 730QED to fix headphone (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Use the right limit for PCM OOB check (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl: imx-card: Do not force slot width to sample width (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23089}
|
|
- ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Fix potential OOB access in audio mixer handling (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23076}
|
|
- ALSA: usb-audio: Add delay quirk for MOONDROP Moonriver2 Ti (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: scarlett2: Fix buffer overflow in config retrieval (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23078}
|
|
- ALSA: usb: Increase volume range that triggers a warning (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/tas2781: Add newly-released HP laptop (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rt5640: Fix duplicate clock properties in DT binding (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add quirk for HP Pavilion x360 to enable mute LED (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tlv320adcx140: fix word length (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tlv320adcx140: Propagate error codes during probe (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tlv320adcx140: fix null pointer (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23006}
|
|
- ASoC: tlv320adcx140: invert DRE_ENABLE (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: Call init callbacks on the correct codec DAI (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: Add missing EXPORT for sdw_slave_type (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Prevent excessive number of frames (Jaroslav Kysela) [RHEL-152847] {CVE-2026-23208}
|
|
- ALSA: hda/cirrus_scodec_test: Fix test suite name (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/cirrus_scodec_test: Fix incorrect setup of gpiochip (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add quirk for Asus Zephyrus G14 2025 using CS35L56, fix speakers (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: yc: Fix microphone on ASUS M6500RE (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: bus: fix off-by-one when allocating slave IDs (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: Revert fix for uninitialized flat cache warning in tegra210_ahub (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: rockchip-spdif: Allow "port" node (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: realtek,rt5640: Document port node (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: realtek,rt5640: Update jack-detect (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: realtek,rt5640: Document mclk (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: davinci-evm: Fix reference leak in davinci_evm_probe (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/tas2781: Skip UEFI calibration on ASUS ROG Xbox Ally X (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: pcm: Improve the fix for race of buffer access at PCM OSS layer (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ops: fix pointer types to be big-endian (Jaroslav Kysela) [RHEL-152847]
|
|
- regmap: maple: free entry on mas_store_gfp() failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: simple-card-utils: Check device node before overwrite direction (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa883x: suppress variant printk (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa884x: fix codec initialisation (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa881x: fix unnecessary initialisation (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa883x: fix unnecessary initialisation (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: add HP Laptop 15s-eq1xxx mute LED quirk (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add quirk for Acer Nitro AN517-55 (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ac97: fix a double free in snd_ac97_controller_register() (Jaroslav Kysela) [RHEL-152847] {CVE-2025-71192}
|
|
- ASoC: sun4i-spdif: Add missing kerneldoc fields for sun4i_spdif_quirks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc_sdw_utils: drop bogus container_of() error handling (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd937x: drop bogus container_of() error handling (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: add -bt tplg suffix if BT is present (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_sdw: shift SSP BT mask bits. (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: fix PCI SSID for one of the HP 200 G2i laptop (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L63 with feedback (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L56 with feedback (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl-asoc-card: Use of_property_present() for non-boolean properties (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rt1320: update VC blind write settings (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_sai: Add missing registers to cache default (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_xcvr: provide regmap names (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_asrc_dma: fix duplicate debugfs directory error (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_easrc: fix duplicate debugfs directory error (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add support for HP Clipper Laptop (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add support for HP Trekker Laptop (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-intel-nvl-match: Drop rt722 l3 from the match table (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-acpi / SOF: Add best_effort flag to get_function_tplg_files op (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: pci-mtl: Change the topology path to intel/sof-ipc4-tplg (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: ipc4-topology: set playback channel mask (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: topology: Add context when sink or source widget is missing (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: vxpocket: Fix resource leak in vxpocket_probe error path (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Don't use __free() in cs_dsp_load() and cs_dsp_load_coeff() (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Remove __free() from cs_dsp_debugfs_string_read() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: audioreach: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6afe: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6apm: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6prm: Fix confusing cleanup.h syntax (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: subtract the endpoint that is not present (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sdm845: set quaternary MI2S codec DAI to I2S format (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: yc: Add quirk for Honor MagicBook X16 2025 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: Fix uninitialized flat cache warning in tegra210_ahub (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: enable woofer speakers on Medion NM14LNL (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Reorder USB mode selection quirk (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Update for native DSD support quirks (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Do not expose PCM and DSD on same altsetting unless DoP (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: Remove unnecessary print function dev_err() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/tas2781: Add new quirk for HP new project (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: cix-ipbloq: Use modern PM ops (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: intel_ace2x: handle multi BPT sections (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: pass sdw_bpt_section to cdns BPT helpers (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: introduce BPT section (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: qcom: adding support for v3.1.0 (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: qcom: remove unused rd_fifo_depth (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: qcom: deprecate qcom,din/out-ports (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: qcom: prepare for v3.x (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: cadence_master: make frame index trace more readable (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: only compute BPT stream in sdw_compute_dp0_port_params (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: cadence_master: set data_per_frame as frame capability (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: cadence: export sdw_cdns_bpt_find_bandwidth (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: intel_ace2x: add fake frame to BRA read command (Jaroslav Kysela) [RHEL-152847]
|
|
- soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/core: add addr_offset field for bus address translation (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: add CIX IPBLOQ HDA controller support (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add support for ASUS UM3406GA (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add support for HP Turbine Laptops (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6afe: fix bad guard conversion (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again) (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Revert use of __free(kfree) back to normal C cleanup (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd939x: fix OF node leaks on probe failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd938x: fix OF node leaks on probe failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd937x: fix OF node leaks on probe failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: Modify awinic amplifier dsp read and write functions (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Log a message if firmware is missing (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Fixup some more Kconfig issues (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: nau8325: Delete a stray tab (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_micfil: Set channel range control (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_micfil: Add default quality for different platforms (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: sof_sdw: Add codec_info for cs42l45 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: Add cs42l45 support functions (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: sof_sdw: Add ability to have auxiliary devices (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: Move codec_name to dai info (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: Add codec_conf for every DAI (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Align mute controls to ALSA expectations (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add terminal type into input/output widget name (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Use __free(kfree) instead of manual freeing (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Use kvzalloc() to allocate control caches (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Take pwr_lock around reading controls debugfs (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: catpt: Do not block the system from suspending (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: catpt: Do not ignore errors on runtime resume (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: catpt: Fix probing order of driver components (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: catpt: Switch to resource_xxx() API (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: catpt: Fix offset checks (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Remove redundant download buffer allocator (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: remove Kconfig dependency on TEGRA20_APB_DMA (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Implement jack detection for HP Thunderbolt Dock G2 (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Modularize realtek_add_jack in mixer_quirks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_xcvr: use dev_err_probe() replacing dev_err() + return (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: stm32: sai: fix clk prepare imbalance on probe failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: stm32: sai: fix device leak on probe (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Add support for Onkyo SE-300PCIE (OK0010) (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Fix NULL vs IS_ERR() bug in sdca_dev_register_functions() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Add support for dedicated RCA switching (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Add ADC helper functions for GPIO (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Refactor resource alloc for sparse mappings (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Use explicit output flag for DAIO resources (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ctxfi: Add hw parameter to daio_mgr_dao_init() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: Fix max bytes-per-interval calculation (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: usb-audio: #undef field_{get,prep}() before local definition (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Remove redundant calls to kunit_deactivate_static_stub() (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Store control length as 32-bit (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: avs: Replace snprintf() with scnprintf() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd934x: add explicit soundwire depenency (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: pcm: Harden the spk_alloc assumption check (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add basic SDCA function driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add basic SDCA class driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: add function devices (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add helper to write initialization writes (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Populate regmap cache for readable Controls (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Factor out helper to process Control defaults (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Use helper macros for control identification (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Move most of the messages from info to debug (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add comment for function reset polling (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Correct FDL locking in sdca_fdl_process() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add missing forward declaration in header (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add stubs for FDL helper functions (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: renesas: rz-ssi: Fix rz_ssi_priv::hw_params_cache::sample_width (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: renesas: rz-ssi: Fix channel swap issue in full duplex mode (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Use SND_SOC_BYTES_E_ACC() for CAL_DATA_RB control (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Use SOC_ENUM_EXT_ACC() for CAL_SET_STATUS control (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc.h: Add SND_SOC_BYTES_E_ACC() to allow setting access flags (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc.h: Add SOC_ENUM_EXT_ACC() to allow setting access flags (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tas2781: Add tas2568/2574/5806m/5806md/5830 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: ti,tas2781: Add TAS2568/2574/5806M/5806MD/5830 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: arizona: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Append \n to debugfs string during read (Jaroslav Kysela) [RHEL-152847]
|
|
- firmware: cs_dsp: Factor out common debugfs string read (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-rx-macro: fix mute_stream affecting all paths (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: remove unused WSA_MACRO_RX_MIX enum (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: remove main path event (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: fix path clock dependencies (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: add volume controls for mix path (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: remove mix path event (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: remove useless gain read/write sequence (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: remove unnecessary bounds check (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: pcmtest: Replace deprecated strcpy with strscpy_pad in setup_patt_bufs (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: wsa883x: drop GPIOD_FLAGS_BIT_NONEXCLUSIVE flag from GPIO lookup (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: wsa881x: drop GPIOD_FLAGS_BIT_NONEXCLUSIVE flag from GPIO lookup (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-core: Pre-check zero CPU/codec DAIs, handle early rtd->dais alloc failure (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: sof-client-probes: Replace snprintf() with scnprintf() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add companion amp Function (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: mediatek,mt8189-afe-pcm: add audio afe document (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: support PCM in platform driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: support TDM in platform driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: support I2S in platform driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: support ADDA in platform driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: support audio clock control (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8189: add common header (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-intel-nvl-match: add rt722 l3 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: add initial support for NVL-S (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: core: intel-dsp-config: Add support for NVL-S (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda: controllers: intel: add support for Nova Lake S (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/hdmi: intelhdmi: add HDMI codec ID for Intel NVL (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi: add NVL match tables (Jaroslav Kysela) [RHEL-152847]
|
|
- PCI: Add Intel Nova Lake S audio Device ID (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ux500: mop500_ab8500: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: omap3pandora: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: omap-twl4030: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: omap-abe-twl6040: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: j721e-evm: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: davinci-evm: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: ti: ams-delta: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: tegra_wm8903: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: tegra210_ahub: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: tegra_asoc_machine: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sunxi: sun8i-codec: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sunxi: sun8i-codec-analog: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sunxi: sun50i-codec-analog: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sunxi: sun4i-codec: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sof-client-probes: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-topology: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-pcm: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-jack: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-dapm: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-core: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_utils: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt_sdca_jack_common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_ti_amp: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt_mf_sdca: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt_amp: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt711: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt700: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_rt5682: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_maxim: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_dmic: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_cs_amp: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_cs42l43: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_cs42l42: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: soc_sdw_bridge_cs35l56: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: tobermory: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdca: sdca_asoc: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: speyside: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: smdk_wm8994: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: littlemill: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: bells: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: samsung: aries_wm8994: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rockchip: rockchip_max98090: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rockchip: rk3288_hdmi_analog: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sc7180: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6usb: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: topology: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6routing: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: t9015: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: g12a-tohdmitx: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: g12a-toacodec: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: axg-tdm-interface: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: axg-spdifout: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: aiu-codec-ctrl: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: meson: aiu-acodec-ctrl: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8186-mt6366-common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mtk-dsp-sof-common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mtk-afe-platform-driver: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_rt5682: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_realtek_common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_pcm512x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_nuvoton_common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_nau8825: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_maxim_common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_es8336: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_cirrus_common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_da7219: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: sof_board_helpers: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: cht_bsw_rt5672: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: cht_bsw_rt5645: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: cht_bsw_max98090_ti: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bytcr_wm5102: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bytcr_rt5651: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bytcr_rt5640: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bytcht_es8316: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bytcht_cx2072x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: boards: bdw-rt5677: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: pcm: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: rt5640: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: control: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: rt5514: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: rt274: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: nau8825: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: es8336: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: avs: da7219: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: atom: sst-atom-controls: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: generic: audio-graph-card: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl: imx-rpmsg: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl: fsl-asoc-card: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm_hubs: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm_adsp: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm9712: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm9713: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm9090: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm9081: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8998: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8997: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8996: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8995: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8994: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8993: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8991: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8990: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8988: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8985: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8978: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8983: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8974: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8971: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8962: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8961: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8960: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8955: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8940: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8904: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8903: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8900: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8804: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8776: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8753: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8770: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8750: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8737: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8731: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8728: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8711: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8580: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8523: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8510: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8400: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8350: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm5110: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm5102: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm0010: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm5100: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd937x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd934x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd9335: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: uda1380: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: twl6040: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: twl4030: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320dac33: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320aic3x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320aic32x4: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320aic31xx: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320adc3xxx: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas6424: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sta529: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas571x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sta350: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sta32x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ssm4567: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ssm2602: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ssm2518: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sma1307: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sma1303: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: simple-mux: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt721-sdca: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt715: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt715-sdca: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt712-sdca-dmic: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt712-sdca: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt711: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt711-sdca: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt700: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5682s: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5682: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5677: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5670: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5668: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5665: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5663: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5660: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5659: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5645: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5651: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5640: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5631: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5516: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5514: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt298: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt286: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt274: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1015: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1011: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: pcm512x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: pcm186x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8824: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8825: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8822: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8821: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8810: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: mt6359: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: mt6358: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ml26124: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max9867: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max9850: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98396: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98390: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98095: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98373: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98090: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98088: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: madera: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-va-macro: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-tx-macro: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-rx-macro: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lm49453: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: jz4770: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: jz4760: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: jz4740: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: hdmi-codec: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: hdac_hda: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: hdac_hdmi: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: hda: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: es8328: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: es8326: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: es8316: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: es7134: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da9055: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da732x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7219: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7219-aad: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7213: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7218: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs2072x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cx20442: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs53l30: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs48l32: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l92: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l90: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l85: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l35: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l24: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l15: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l73: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42xx8: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l56: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l52: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l51: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l43: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l43-jack: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs4234: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l56: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l45: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l41: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l33: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cpcap: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88261: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88395: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: audio-iio-aux: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: arizona-jack: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: alc5623: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adav80x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ak4641: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adau7118: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adau1977: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adau17x1: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adau1781: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adau1761: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ad193x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ad1836: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: 88pm860x: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ab8500: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: atmel: tse850-pcm5142: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: acp5x-mach: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: atmel: sam9g20_wm8731: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: acp3x-es83xx: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: acp-mach-common: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc.h: convert to snd_soc_dapm_xxx() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: avs: Honor NHLT override when setting up a path (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: avs: Allow the topology to carry NHLT data (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-rx-macro: add SM6115 compatible (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-va-macro: add SM6115 compatible (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: atom: Replace strcpy() with strscpy() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: boards: fix HDMI playback lookup when HDMI-In capture used (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: gus: Remove unused declarations (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Allow restoring factory calibration through ALSA control (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Add control to read CAL_SET_STATUS (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_sdw: add codec speaker support for the SKU (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-ptl-match: add cs42l43_agg_l3_cs35l56_2 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_sdw: create BT dai link if bt_link_mask is set (Jaroslav Kysela) [RHEL-152847]
|
|
- ASOC: Intel: sof_sdw: add quirk for Avell B.ON (OEM rebranded NUC15) (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: soc-acpi-intel-ptl-match: Add support for rt722_l0_rt1320_l23 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_sdw: Add quirk to exclude RT722 speaker (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: sof_rt5682: Add quirk override support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Alter error codes for calibration routine (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: au88x0: Fix array bounds warning in EQ drivers (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/senary: Replace magic numbers with defined constants (Jaroslav Kysela) [RHEL-152847]
|
|
- regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: stm32: dfsdm: don't use %%pK through printk (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-pcm: Preserve hw parameters from components in dpcm_runtime_setup_fe (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: ac97: Fix kernel-doc warning for snd_ac97_reset (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: Use guard() for spin locks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm-dai: Use guard() for spin locks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6apm-dai: Use guard() for spin locks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6afe: Use guard() for spin locks (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6asm: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6prm: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6afe: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6apm: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: q6adm: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: audioreach: Use automatic cleanup of kfree() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: qcom: audioreach: remove unused variables (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: set runtime correctly for each stream (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm-dai: use q6asm_get_hw_pointer (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: add q6asm_get_hw_pointer (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm-dai: schedule all available frames to avoid dsp under-runs (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: q6asm: handle the responses after closing (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: ti,pcm1862: convert to dtschema (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: ti,tas2781: Add TAS5822 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tas2781: Add tas5822 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tas2781: Replace deprecated strcpy() with strscpy() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88261: pass pointer directly instead of passing the address (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: simplify aw87390_init() argument a bit (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: adding the two virtual Mux widgets in the routes (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_spdif: Constify some structures (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: adding two virtual Mux widgets for digital mics (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: line6: add support for POD HD Pro X (Jaroslav Kysela) [RHEL-152847]
|
|
- regcache: maple: Split ->populate() from ->init() (Jaroslav Kysela) [RHEL-152847]
|
|
- regcache: Add ->populate() callback to separate from ->init() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-core: check ops & auto_selectable_formats in snd_soc_dai_get_fmt() to prevent dereference error (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codec: wm8400: replace printk() calls with dev_*() device aware logging (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: remove hyphen from AMP<index> name_prexix (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: fixing the stream index (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: va-macro: fix revision checking (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: select SND_SOC_SDW_UTILS in SND_SOC_SOF_HDA_GENERIC (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: pcm: Set the PCM device name for HDMI (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs4271: Add support for the external mclk (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tas2783: Fix build for SoundWire API update (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sc7280: make use of common helpers (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sdm845: make use of common helpers (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sdw: remove redundant code (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add HID button IRQ (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add early IRQ handling (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add UMP timeout handling for FDL (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add completion for FDL start and stop (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add FDL-specific IRQ processing (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add FDL library for XU entities (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add SDCA FDL data parsing (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add UMP buffer helper functions (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Parse Function Reset max delay (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Parse XU Entity properties (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Force some SDCA Controls to be volatile (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Rely less on the ASoC component in IRQ handling (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Factor out a helper to find SDCA IRQ data (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Update externally_requested flag to cover all requests (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Pass device register map from IRQ alloc to handlers (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Pass SoundWire slave to HID (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Add manual PM runtime gets to IRQ handlers (Jaroslav Kysela) [RHEL-152847]
|
|
- regmap: sdw-mbq: Don't assume the regmap device is the SoundWire slave (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SDCA: Rename SoundWire struct device variables (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib-test: Add test cases for cs_amp_set_efi_calibration_data() (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/cs35l56: Set cal_index to the amp index (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Add calibration command to store into UEFI (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Add function to write calibration to UEFI (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Return attributes from cs_amp_get_efi_variable() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib-test: Add cases for factory calibration helpers (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: hda/cs35l56: Create debugfs files for factory calibration (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Create debugfs files for factory calibration (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Add common code for factory calibration (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs-amp-lib: Add helpers for factory calibration (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: cs35l56: Read silicon ID during initialization and save it (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: renesas: fsi: Constify struct fsi_stream_handler (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: qcom,sm8250: add QRB2210 soundcard (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: maestro3: using vmalloc_array() to handle the code (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sdw_utils: add name_prefix for rt1321 part id (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc_sdw_utils: add cs35l57 support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: adding DAPM routing for digital output for max98091 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: fixing a space (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Fix function topology name check in profile info output (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: max98090/91: added DAPM widget for digital output for max98091 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl_aud2htx: add IEC958_SUBFRAME_LE format in supported list (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: add hyphen between name and index to amp name_prefix (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: rockchip: i2s-tdm: Omit a variable reassignment in rockchip_i2s_tdm_probe() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: don't check node names (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: va-macro: Clean up on error path in probe() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc.h: remove snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: uniphier: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: tegra210: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: tegra: tegra186: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8195: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8192: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8186: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: mt8183: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mediatek: common: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: catpt: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: intel: atom: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: fsl: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa884x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa883x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wsa881x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm_hubs: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm_adsp: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm9081: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8996: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8994: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8991: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8990: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8985: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8983: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8962: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8960: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8958: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8955: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8904: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8753: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8903: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8731: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8580: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8400: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm8350: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm5110: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm5102: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wm2000: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd939x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd938x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd937x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd934x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: wcd9335: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: uda1334: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: twl6040: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: twl4030: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tscs454: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tscs42xx: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320dac33: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320aic23: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320adcx140: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tlv320adc3xxx: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tfa989x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas5805m: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas5720: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas571x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas5086: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas2781: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: tas2562: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sta350: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sta32x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sma1307: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sma1303: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: sgtl5000: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt9123: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt711-sdca: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5670: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5665: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5659: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5631: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1015: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1318: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt1011: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: peb2466: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: pcm512x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: pcm1681: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ntp8835: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8822: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: nau8810: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: mt6660: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: mt6359: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: mt6358: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: msm8916-wcd-digital: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98925: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max9867: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98390: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98095: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98090: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max98088: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max9768: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: max9759: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: madera: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-wsa-macro: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-va-macro: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-tx-macro: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: lpass-rx-macro: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: idt821034: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: es8328: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da9055: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da732x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7219: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7218: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7213: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: da7210: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs48l32: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs47l15: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs43130: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l84: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l51: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l43: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs42l42: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs4271: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs4270: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs4234: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l45: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cs35l36: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: cros_ec: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: bd28623: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88399: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88395: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88261: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88166: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw88081: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: aw87390: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: arizona: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ak4619: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ak4641: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ak4458: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: adav80x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: ab8500: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: 88pm860x: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: atmel: use snd_kcontrol_chip() instead of snd_soc_kcontrol_component() (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: Add bindings for SpacemiT K1 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: amd_sdw: Propagate the PCI subsystem Vendor and Device IDs (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: amd: ps: Propagate the PCI subsystem Vendor and Device IDs (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: qcom: sc8280xp: Add support for Kaanapali (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: dt-bindings: qcom,sm8250: Add kaanapali sound card (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: va-macro: Rework version checking (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: mxs-saif: support usage with simple-audio-card (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: codecs: rt5670: use SOC_VALUE_ENUM_SINGLE_DECL for DAC2 L/R MX-1B (Jaroslav Kysela) [RHEL-152847]
|
|
- dt-bindings: sound: Update ADMAIF bindings for tegra264 (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoc: tas2783A: Remove unneeded variable assignment (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: sof-function-topology-lib: escalate the log when missing function topoplogy (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Intel: use sof_sdw as default SDW machine driver (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: don't check the existence of dummy topology (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: add platform name into sof_intel_dsp_desc (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc_sdw_utils: export asoc_sdw_get_dai_type (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: Intel: export sof_sdw_get_tplg_files (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc_sdw_utils: add name_prefix to asoc_sdw_codec_info struct (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: soc-acpi: make some variables of acpi adr and link adr non-const (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: SOF: Don't print the monolithic topology name if function topology may be used (Jaroslav Kysela) [RHEL-152847]
|
|
- ALSA: Add definitions for the bits in IEC958 subframe (Jaroslav Kysela) [RHEL-152847]
|
|
- ACPICA: Add SoundWire File Table (SWFT) signature (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: wm8904: add DMIC support (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: wm8904: get platform data from DT (Jaroslav Kysela) [RHEL-152847]
|
|
- ASoC: wm8904: Don't touch GPIO configs set to 0xFFFF (Jaroslav Kysela) [RHEL-152847]
|
|
|
|
* Wed Apr 01 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-690.el9]
|
|
- s390/dasd: Copy detected format information to secondary device (Mete Durlu) [RHEL-161530]
|
|
- s390/dasd: Move quiesce state with pprc swap (Mete Durlu) [RHEL-161530]
|
|
- s390/dasd: Fix gendisk parent after copy pair swap (Mete Durlu) [RHEL-161530]
|
|
- x86/mce/amd: Check SMCA feature bit before accessing SMCA MSRs (David Arcari) [RHEL-128579]
|
|
- x86/mce: Handle AMD threshold interrupt storms (David Arcari) [RHEL-128579]
|
|
- x86/mce: Do not clear bank's poll bit in mce_poll_banks on AMD SMCA systems (David Arcari) [RHEL-128579]
|
|
- x86/mce: Add support for physical address valid bit (David Arcari) [RHEL-128579]
|
|
- x86/mce: Save and use APEI corrected threshold limit (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Define threshold restart function for banks (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Remove redundant reset_block() (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Support SMCA Corrected Error Interrupt (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Enable interrupt vectors once per-CPU on SMCA systems (David Arcari) [RHEL-128579]
|
|
- x86/mce: Unify AMD DFR handler with MCA Polling (David Arcari) [RHEL-128579]
|
|
- x86/mce: Unify AMD THR handler with MCA Polling (David Arcari) [RHEL-128579]
|
|
- x86/mce: Add a clear_bank() helper (David Arcari) [RHEL-128579]
|
|
- x86/mce: Move machine_check_poll() status checks to helper functions (David Arcari) [RHEL-128579]
|
|
- x86/mce: Separate global and per-CPU quirks (David Arcari) [RHEL-128579]
|
|
- x86/mce: Do 'UNKNOWN' vendor check early (David Arcari) [RHEL-128579]
|
|
- x86/mce: Define BSP-only SMCA init (David Arcari) [RHEL-128579]
|
|
- x86/mce: Define BSP-only init (David Arcari) [RHEL-128579]
|
|
- x86/mce: Set CR4.MCE last during init (David Arcari) [RHEL-128579]
|
|
- x86/mce: Remove __mcheck_cpu_init_early() (David Arcari) [RHEL-128579]
|
|
- x86/mce: Cleanup bank processing on init (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Put list_head in threshold_bank (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Remove smca_banks_map (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Remove return value for mce_threshold_{create,remove}_device() (David Arcari) [RHEL-128579]
|
|
- x86/mce/amd: Rename threshold restart function (David Arcari) [RHEL-128579]
|
|
- Merge tag 'x86_tdx_for_6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip (David Arcari) [RHEL-128579]
|
|
- x86/fred: Add a machine check entry stub for FRED [partial] (David Arcari) [RHEL-128579]
|
|
- x86/mce/inject: Add missing MODULE_DESCRIPTION() line (David Arcari) [RHEL-128579]
|
|
- x86/mce/inject: Only write MCA_MISC when a value has been supplied (David Arcari) [RHEL-128579]
|
|
- x86/msr: Convert __rdmsr() uses to native_rdmsrq() uses [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Convert __wrmsr() uses to native_wrmsr{,q}() uses [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Add the native_rdmsrq() helper (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'native_wrmsrl()' to 'native_wrmsrq()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'mce_wrmsrl()' to 'mce_wrmsrq()' (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'mce_rdmsrl()' to 'mce_rdmsrq()' (David Arcari) [RHEL-128579]
|
|
- x86/msr: Add explicit includes of <asm/msr.h> [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'rdmsrl_on_cpu()' to 'rdmsrq_on_cpu()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'wrmsrl_safe()' to 'wrmsrq_safe()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'rdmsrl_safe()' to 'rdmsrq_safe()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'wrmsrl()' to 'wrmsrq()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Rename 'rdmsrl()' to 'rdmsrq()' [partial] (David Arcari) [RHEL-128579]
|
|
- x86/msr: Standardize on 'u32' MSR indices in <asm/msr.h> (David Arcari) [RHEL-128579]
|
|
- x86/msr: Harmonize the prototype and definition of do_trace_rdpmc() (David Arcari) [RHEL-128579]
|
|
- net: hv_netvsc: reject RSS hash key programming without RX indirection table (Medha Mummigatti) [RHEL-150569]
|
|
- powerpc/watchpoints: Annotate atomic context in more places (Mamatha Inamdar) [RHEL-145581]
|
|
- powerpc/watchpoint: Disable pagefaults when getting user instruction (Mamatha Inamdar) [RHEL-145581]
|
|
- i2c: i801: Add support for Intel Nova Lake-S (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Fix the Intel Diamond Rapids features (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Add support for Intel Diamond Rapids (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Add support for Intel Wildcat Lake-U (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Hide Intel Birch Stream SoC TCO WDT (David Arcari) [RHEL-152917]
|
|
- i2c: smbus: introduce Write Disable-aware SPD instantiating functions (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Use MMIO if available (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Switch to iomapped register access (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Improve too small kill wait time in i801_check_post (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code (David Arcari) [RHEL-152917]
|
|
- i2c: i801: Cosmetic improvements (David Arcari) [RHEL-152917]
|
|
- x86/CPU/AMD: Add CPUID faulting support (David Arcari) [RHEL-140357]
|
|
- gfs2: Fix data loss during inode evict (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: minor evict_[un]linked_inode cleanup (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Avoid unnecessary transactions in evict_linked_inode (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Remove unnecessary check in gfs2_evict_inode (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Call unlock_new_inode before d_instantiate (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Don't remember delete unless it's successful (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Remove redundant check for GLF_INSTANTIATE_NEEDED (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: fiemap page fault fix (Andreas Gruenbacher) [RHEL-127164]
|
|
- gfs2: Don't get stuck writing page onto itself under direct I/O (Andreas Gruenbacher) [RHEL-127164]
|
|
- dlm: fix recovery pending middle conversion (Alexander Aring) [RHEL-142778]
|
|
|
|
* Mon Mar 30 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-689.el9]
|
|
- redhat: Update decompressor image path (Mete Durlu) [RHEL-141416]
|
|
- block: change blk_get_meta_cap() stub return -ENOIOCTLCMD (Ming Lei) [RHEL-154215]
|
|
- block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP (Ming Lei) [RHEL-154215]
|
|
- block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl() (Ming Lei) [RHEL-154215]
|
|
- block: handle pi_tuple_size in queue_limits_stack_integrity (Ming Lei) [RHEL-154215]
|
|
- block: add __must_check attribute to sb_min_blocksize() (Ming Lei) [RHEL-154215]
|
|
- xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super (Ming Lei) [RHEL-154215]
|
|
- isofs: check the return value of sb_min_blocksize() in isofs_fill_super (Ming Lei) [RHEL-154215]
|
|
- exfat: check return value of sb_min_blocksize in exfat_read_boot_sector (Ming Lei) [RHEL-154215]
|
|
- vfat: fix missing sb_min_blocksize() return value checks (Ming Lei) [RHEL-154215]
|
|
- block: rate-limit capacity change info log (Ming Lei) [RHEL-154215]
|
|
- badblocks: use sector_t instead of int to avoid truncation of badblocks length (Ming Lei) [RHEL-154215]
|
|
- blk-mq: fix elevator depth_updated method (Ming Lei) [RHEL-154215]
|
|
- block/mq-deadline: Switch back to a single dispatch list (Ming Lei) [RHEL-154215]
|
|
- block/mq-deadline: Introduce dd_start_request() (Ming Lei) [RHEL-154215]
|
|
- block: relax atomic write boundary vs chunk size check (Ming Lei) [RHEL-154215]
|
|
- block: fix stacking of atomic writes when atomics are not supported (Ming Lei) [RHEL-154215]
|
|
- block: update validation of atomic writes boundary for stacked devices (Ming Lei) [RHEL-154215]
|
|
- block: use chunk_sectors when evaluating stacked atomic write limits (Ming Lei) [RHEL-154215]
|
|
- ilog2: add max_pow_of_two_factor() (Ming Lei) [RHEL-154215]
|
|
- block: make bio auto-integrity deadlock safe (Ming Lei) [RHEL-154215]
|
|
- block: blocking mempool_alloc doesn't fail (Ming Lei) [RHEL-154215]
|
|
- block: zero non-PI portion of auto integrity buffer (Ming Lei) [RHEL-154215]
|
|
- fs: add ioctl to query metadata and protection info capabilities (Ming Lei) [RHEL-154215]
|
|
- nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE (Ming Lei) [RHEL-154215]
|
|
- block: introduce pi_tuple_size field in blk_integrity (Ming Lei) [RHEL-154215]
|
|
- block: rename tuple_size field in blk_integrity to metadata_size (Ming Lei) [RHEL-154215]
|
|
- block: Enforce power-of-2 physical block size (Ming Lei) [RHEL-154215]
|
|
- block: avoid possible overflow for chunk_sectors check in blk_stack_limits() (Ming Lei) [RHEL-154215]
|
|
- lib/sbitmap: make sbitmap_get_shallow() internal (Ming Lei) [RHEL-154215]
|
|
- lib/sbitmap: convert shallow_depth from one word to the whole sbitmap (Ming Lei) [RHEL-154215]
|
|
- md/raid0: convert raid0_make_request() to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- block: Fix an error path in disk_update_zone_resources() (Ming Lei) [RHEL-154215]
|
|
- block: rnbd-clt: Fix signedness bug in init_dev() (Ming Lei) [RHEL-154215]
|
|
- block: fix comment for op_is_zone_mgmt() to include RESET_ALL (Ming Lei) [RHEL-154215]
|
|
- block: fix NULL pointer dereference in blk_zone_reset_all_bio_endio() (Ming Lei) [RHEL-154215]
|
|
- blk-throttle: fix throtl_data leak during disk release (Ming Lei) [RHEL-154215]
|
|
- xen-blkfront: Cache feature_persistent value before advertisement (Ming Lei) [RHEL-154215]
|
|
- zram: off by one in read_block_state() (Ming Lei) [RHEL-154215]
|
|
- block: fix ordering of recursive split IO (Ming Lei) [RHEL-154215]
|
|
- block: skip unnecessary checks for split bio (Ming Lei) [RHEL-154215]
|
|
- blk-crypto: convert to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- md/md-linear: convert to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- md/raid5: convert to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- md/raid10: convert read/write to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- md/raid10: add a new r10bio flag R10BIO_Returned (Ming Lei) [RHEL-154215]
|
|
- md/raid1: convert to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- md/raid0: convert raid0_handle_discard() to use bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- block: factor out a helper bio_submit_split_bioset() (Ming Lei) [RHEL-154215]
|
|
- blk-crypto: fix missing blktrace bio split events (Ming Lei) [RHEL-154215]
|
|
- md: fix mssing blktrace bio split events (Ming Lei) [RHEL-154215]
|
|
- blk-mq: add QUEUE_FLAG_BIO_ISSUE_TIME (Ming Lei) [RHEL-154215]
|
|
- block: initialize bio issue time in blk_mq_submit_bio() (Ming Lei) [RHEL-154215]
|
|
- block: cleanup bio_issue (Ming Lei) [RHEL-154215]
|
|
- drbd: always set BLK_FEAT_STABLE_WRITES (Ming Lei) [RHEL-154215]
|
|
- null_blk: fix kmemleak by releasing references to fault configfs items (Ming Lei) [RHEL-154215]
|
|
- block: don't merge bios with different app_tags (Ming Lei) [RHEL-154215]
|
|
- block: rnbd-clt: Fix leaked ID in init_dev() (Ming Lei) [RHEL-154215]
|
|
- block: fix cached zone reports on devices with native zone append (Ming Lei) [RHEL-154215]
|
|
- block: Clear BLK_ZONE_WPLUG_PLUGGED when aborting plugged BIOs (Ming Lei) [RHEL-154215]
|
|
- zram: fix the issue that the write - back limits might overflow (Ming Lei) [RHEL-154215]
|
|
- block/blk-throttle: drop unneeded blk_stat_enable_accounting (Ming Lei) [RHEL-154215]
|
|
- block/blk-throttle: Fix throttle slice time for SSDs (Ming Lei) [RHEL-154215]
|
|
- ps3disk: use memcpy_{from,to}_bvec index (Ming Lei) [RHEL-154215]
|
|
- nbd: defer config unlock in nbd_genl_connect (Ming Lei) [RHEL-154215]
|
|
- nbd: defer config put in recv_work (Ming Lei) [RHEL-154215]
|
|
- block: freeze queue when updating zone resources (Ming Lei) [RHEL-154215]
|
|
- block: handle zone management operations completions (Ming Lei) [RHEL-154215]
|
|
- null_blk: set dma alignment to logical block size (Ming Lei) [RHEL-154215]
|
|
- block: make REQ_OP_ZONE_OPEN a write operation (Ming Lei) [RHEL-154215]
|
|
- block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL (Ming Lei) [RHEL-154215]
|
|
- block: require LBA dma_alignment when using PI (Ming Lei) [RHEL-154215]
|
|
- block: Remove elevator_lock usage from blkg_conf frozen operations (Ming Lei) [RHEL-154215]
|
|
- loop: fix backing file reference leak on validation error (Ming Lei) [RHEL-154215]
|
|
- nbd: restrict sockets to TCP and UDP (Ming Lei) [RHEL-154215]
|
|
- blk-throttle: fix access race during throttle policy activation (Ming Lei) [RHEL-154215]
|
|
- block: use int to store blk_stack_limits() return value (Ming Lei) [RHEL-154215]
|
|
- blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx (Ming Lei) [RHEL-154215]
|
|
- blk-zoned: Fix a lockdep complaint about recursive locking (Ming Lei) [RHEL-154215]
|
|
- null_blk: Fix the description of the cache_size module argument (Ming Lei) [RHEL-154215]
|
|
- block: fix kobject double initialization in add_disk (Ming Lei) [RHEL-154215]
|
|
- block: ensure discard_granularity is zero when discard is not supported (Ming Lei) [RHEL-154215]
|
|
- sunvdc: Balance device refcount in vdc_port_mpgroup_check (Ming Lei) [RHEL-154215]
|
|
- block: sanitize chunk_sectors for atomic write limits (Ming Lei) [RHEL-154215]
|
|
- block: mtip32xx: Fix usage of dma_map_sg() (Ming Lei) [RHEL-154215]
|
|
- zram: refuse to use zero sized block device as backing device (Ming Lei) [RHEL-154215]
|
|
- block: sunvdc: add check for mdesc_grab() returning NULL (Ming Lei) [RHEL-154215]
|
|
- rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails (Ming Lei) [RHEL-154215]
|
|
- rbd: fix possible memory leak in rbd_sysfs_init() (Ming Lei) [RHEL-154215]
|
|
- xen-blkfront: Advertise feature-persistent as user requested (Ming Lei) [RHEL-154215]
|
|
- xen-blkback: Advertise feature-persistent as user requested (Ming Lei) [RHEL-154215]
|
|
- xen-blkfront: Apply 'feature_persistent' parameter when connect (Ming Lei) [RHEL-154215]
|
|
- xen-blkback: Apply 'feature_persistent' parameter when connect (Ming Lei) [RHEL-154215]
|
|
- xen-blkback: fix persistent grants negotiation (Ming Lei) [RHEL-154215]
|
|
- xen/blkfront: fix comment for need_copy (Ming Lei) [RHEL-154215]
|
|
- zram: clear IDLE flag after recompression (Ming Lei) [RHEL-154215]
|
|
- drm/mgag200: fix mgag200_bmc_stop_scanout() (Jocelyn Falempe) [RHEL-148287]
|
|
|
|
* Wed Mar 25 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [5.14.0-688.el9]
|
|
- HID: intel-thc-hid: intel-thc: Fix incorrect pointer arithmetic in I2C regs save (Benjamin Tissoires) [RHEL-142234] {CVE-2025-39818}
|
|
- NFSv4: Check for delegation validity in nfs_start_delegation_return_locked() (Scott Mayhew) [RHEL-151415]
|
|
- perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler (Michael Petlan) [RHEL-155340]
|
|
- perf: Extend the bit width of the arch-specific flag (Michael Petlan) [RHEL-155340]
|
|
- perf: Remove unnecessary parameter of security check (Michael Petlan) [RHEL-155340]
|
|
- scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count() (CKI Backport Bot) [RHEL-150423] {CVE-2026-23193}
|
|
- nfsd: add list_head nf_gc to struct nfsd_file (Roberto Bergantinos Corpas) [RHEL-152552]
|
|
- redhat: genlog: add new JIRA cloud server hostname (Jan Stancek)
|
|
- gfs2: less aggressive low-memory log flushing (Andreas Gruenbacher) [RHEL-153055]
|
|
- io_uring: graduate to full support (Jeff Moyer) [RHEL-120699]
|
|
- netfilter: nf_tables: fix use-after-free in nf_tables_addchain() (CKI Backport Bot) [RHEL-153270] {CVE-2026-23231}
|
|
- net: atm: fix /proc/net/atm/lec handling (Hangbin Liu) [RHEL-146424] {CVE-2025-38180}
|
|
- net: atm: add lec_mutex (Hangbin Liu) [RHEL-146424]
|
|
- macvlan: observe an RCU grace period in macvlan_common_newlink() error path (Hangbin Liu) [RHEL-150227]
|
|
- macvlan: fix error recovery in macvlan_common_newlink() (Hangbin Liu) [RHEL-150227] {CVE-2026-23209}
|
|
- spi: tegra210-quad: Protect curr_xfer check in IRQ handler (Charles Mirabile) [RHEL-145814]
|
|
- spi: tegra210-quad: Protect curr_xfer clearing in tegra_qspi_non_combined_seq_xfer (Charles Mirabile) [RHEL-145814]
|
|
- spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer (Charles Mirabile) [RHEL-145814]
|
|
- spi: tegra210-quad: Protect curr_xfer assignment in tegra_qspi_setup_transfer_one (Charles Mirabile) [RHEL-145814]
|
|
- spi: tegra210-quad: Move curr_xfer read inside spinlock (Charles Mirabile) [RHEL-145814]
|
|
- spi: tegra210-quad: Return IRQ_HANDLED when timeout already processed transfer (Charles Mirabile) [RHEL-145814]
|
|
- migrate: correct lock ordering for hugetlb file folios (Luiz Capitulino) [RHEL-147267] {CVE-2026-23097}
|
|
- ALSA: aloop: Fix racy access at PCM trigger (Jaroslav Kysela) [RHEL-150131] {CVE-2026-23191}
|
|
- netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate() (CKI Backport Bot) [RHEL-149749] {CVE-2026-23111}
|
|
- bonding: fix use-after-free due to enslave fail after slave array update (CKI Backport Bot) [RHEL-152386] {CVE-2026-23171}
|
|
- Add signing key for Nvidia Jetson and Bluefield GPU signing keys (Enrique Belarte Luque) [RHEL-145938]
|
|
- Add NVIDIA Jetson signing key for OOT modules (Enrique Belarte Luque) [RHEL-145938]
|
|
- vsock: lock down child_ns_mode as write-once (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: Use container_of() to get net namespace in sysctl handlers (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: prevent child netns mode switch from local to global (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: fix child netns mode initialization (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: add netns support to virtio transports (Stefano Garzarella) [RHEL-117126]
|
|
- virtio: set skb owner of virtio_transport_reset_no_sock() reply (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: add netns to vsock core (Stefano Garzarella) [RHEL-117126]
|
|
- vhost/vsock: improve RCU read sections around vhost_vsock_get() (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: fix lock inversion in vsock_assign_transport() (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: Do not allow binding to VMADDR_PORT_ANY (Stefano Garzarella) [RHEL-117126]
|
|
- vsock: reset socket state when de-assigning the transport (Stefano Garzarella) [RHEL-117126]
|
|
- vsock/virtio: cancel close work in the destructor (Stefano Garzarella) [RHEL-117126]
|
|
- dpll: zl3073x: Fix output pin phase adjustment sign (Ivan Vecera) [RHEL-149693]
|
|
- mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: add missing hugetlb_lock in __unmap_hugepage_range() (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: pass folio instead of page to unmap_ref_private() (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: fix two comments related to huge_pmd_unshare() (Rafael Aquini) [RHEL-150765]
|
|
- mm/hugetlb: fix hugetlb_pmd_shared() (Rafael Aquini) [RHEL-150765] {CVE-2026-23100}
|
|
- mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count (Rafael Aquini) [RHEL-150765]
|
|
- mm: hugetlb: independent PMD page table shared count (Rafael Aquini) [RHEL-150765] {CVE-2024-57883}
|
|
- mm/rmap: fix two comments related to huge_pmd_unshare() (Rafael Aquini) [RHEL-150765]
|
|
- mm/rmap: introduce and use hugetlb_remove_rmap() (Rafael Aquini) [RHEL-150765]
|
|
- x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() (Rafael Aquini) [RHEL-150765] {CVE-2025-39845}
|
|
- mm: introduce and use {pgd,p4d}_populate_kernel() (Rafael Aquini) [RHEL-150765]
|
|
- mm: move page table sync declarations to linux/pgtable.h (Rafael Aquini) [RHEL-150765] {CVE-2025-39844}
|
|
- redhat: update self-test data (Patrick Talbert)
|
|
- redhat: set defaults for 9.8 (Patrick Talbert)
|
|
- gitlab-ci: disttag override for 9.8 (Patrick Talbert)
|
|
- ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() (CKI Backport Bot) [RHEL-143546] {CVE-2025-71085}
|
|
- s390/pci: Avoid deadlock between PCI error recovery and mlx5 crdump (Mete Durlu) [RHEL-157931]
|
|
- pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN (Olga Kornievskaia) [RHEL-151429]
|
|
- USB: storage: Remove subclass and protocol overrides from Novatek quirk (Desnes Nunes) [RHEL-147786]
|
|
- usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer (Desnes Nunes) [RHEL-147786] {CVE-2025-68331}
|
|
- xhci: dbgtty: fix device unregister: fixup (Desnes Nunes) [RHEL-147786]
|
|
- xhci: dbgtty: fix device unregister (Desnes Nunes) [RHEL-147786]
|
|
- tty: fix tty_port_tty_*hangup() kernel-doc (Desnes Nunes) [RHEL-147786]
|
|
- tty: introduce and use tty_port_tty_vhangup() helper (Desnes Nunes) [RHEL-147786]
|
|
- usb: storage: sddr55: Reject out-of-bound new_pba (Desnes Nunes) [RHEL-147786] {CVE-2025-40345}
|
|
- USB: serial: option: add support for Rolling RW101R-GL (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: ucsi: psy: Set max current to zero when disconnected (Desnes Nunes) [RHEL-147786]
|
|
- drivers/usb/dwc3: fix PCI parent check (Desnes Nunes) [RHEL-147786]
|
|
- usb: storage: Fix memory leak in USB bulk transport (Desnes Nunes) [RHEL-147786] {CVE-2025-68288}
|
|
- xhci: sideband: Fix race condition in sideband unregister (Desnes Nunes) [RHEL-147786]
|
|
- xhci: dbgtty: Fix data corruption when transmitting data form DbC to host (Desnes Nunes) [RHEL-147786]
|
|
- xhci: fix stale flag preventig URBs after link state error is cleared (Desnes Nunes) [RHEL-147786]
|
|
- USB: serial: ftdi_sio: add support for u-blox EVK-M101 (Desnes Nunes) [RHEL-147786]
|
|
- usb: gadget: udc: fix use-after-free in usb_gadget_state_work (Desnes Nunes) [RHEL-147786] {CVE-2025-68282}
|
|
- USB: serial: option: add Telit FN920C04 ECM compositions (Desnes Nunes) [RHEL-147786]
|
|
- usb: roles: get usb role switch from parent only for usb-b-connector (Desnes Nunes) [RHEL-147786]
|
|
- Revert "tcpm: allow looking for role_sw device in the main node" (Desnes Nunes) [RHEL-147786]
|
|
- USB: serial: option: add Quectel RG255C (Desnes Nunes) [RHEL-147786]
|
|
- tcpm: allow looking for role_sw device in the main node (Desnes Nunes) [RHEL-147786]
|
|
- tcpm: switch check for role_sw device with fw_node (Desnes Nunes) [RHEL-147786]
|
|
- usb/core/quirks: Add Huawei ME906S to wakeup quirk (Desnes Nunes) [RHEL-147786]
|
|
- USB: serial: option: add UNISOC UIS7720 (Desnes Nunes) [RHEL-147786]
|
|
- xhci: dbc: enable back DbC in resume if it was enabled before suspend (Desnes Nunes) [RHEL-147786]
|
|
- xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci-pci: Fix USB2-only root hub registration (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: switch: split out ports definition (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: mux: gpio-sbu: Make enable gpio optional (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: gpio-sbu-mux: Make 'enable-gpios' optional (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: Don't call clk_bulk_disable_unprepare() twice (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp (Desnes Nunes) [RHEL-147786]
|
|
- usb: vhci-hcd: Prevent suspending virtually attached devices (Desnes Nunes) [RHEL-147786]
|
|
- USB: serial: option: add SIMCom 8230C compositions (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Fix use-after-free in tb_dp_dprx_work (Desnes Nunes) [RHEL-147786] {CVE-2025-40002}
|
|
- docs: driver-api: fix spelling of "buses". (Desnes Nunes) [RHEL-147786]
|
|
- media: Documentation: media: Improve camera sensor documentation (Desnes Nunes) [RHEL-147786]
|
|
- ipmi: Add docs for the IPMI IPMB driver (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: align PORTSC trace with one-based port numbering (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: correct indentation for PORTSC tracing function (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: improve TR Dequeue Pointer mask (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci-pci: add support for hosts with zero USB3 ports (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: Update a comment about Stop Endpoint retries (Desnes Nunes) [RHEL-147786]
|
|
- Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" (Desnes Nunes) [RHEL-147786]
|
|
- usb: gadget: Introduce free_usb_request helper (Desnes Nunes) [RHEL-147786]
|
|
- usb: gadget: Store endpoint pointer in usb_request (Desnes Nunes) [RHEL-147786]
|
|
- phy: fsl-imx8mq-usb: fix typec orientation switch when built as module (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: Stub out typec_switch APIs when CONFIG_TYPEC=n (Desnes Nunes) [RHEL-147786]
|
|
- usb: mon: Increase BUFF_MAX to 64 MiB to support multi-MB URBs (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: plat: Facilitate using autosuspend for xhci plat devices (Desnes Nunes) [RHEL-147786]
|
|
- redhat/configs: Enable DWC3 Generic Platform Driver on RHEL aarch64 (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: add generic driver to support flattened (Desnes Nunes) [RHEL-147786]
|
|
- clk: Provide devm_clk_bulk_get_all_enabled() helper (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: dwc3: add support for SpacemiT K1 (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update thunderbolt.h header file (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update xdomain.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update usb4_port.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update usb4.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update tunnel.h function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update tunnel.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update tmu.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Add missing documentation in tb.h (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update tb.h function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update tb.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update switch.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update retimer.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update property.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update path.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update nvm.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Add missing documentation in nhi_regs.h ring_desc structure (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update nhi.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update lc.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update eeprom.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update domain.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update dma_port.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Add missing documentation in ctl.h tb_cfg_request struct (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update ctl.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update clx.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update cap.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Update acpi.c function documentation (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Handle mode transitions for CD321x (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Read data status in probe and cache its value (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Use read_power_status function in probe (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Update partner identity when power status was updated (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Register DisplayPort and Thunderbolt altmodes for cd321x (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Read USB4, Thunderbolt and DisplayPort status for cd321x (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Add cd321x struct with separate size (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Trace data status for CD321x correctly (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Move switch_power_state to tipd_data (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Move initial irq mask to tipd_data (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tipd: Clear interrupts first (Desnes Nunes) [RHEL-147786]
|
|
- usb: host: enable USB offload during system sleep (Desnes Nunes) [RHEL-147786]
|
|
- xhci: sideband: add api to trace sideband usage (Desnes Nunes) [RHEL-147786]
|
|
- usb: offload: add apis for offload usage tracking (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci-plat: separate dev_pm_ops for each pm_event (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: core: Introduce glue callbacks for flattened implementations (Desnes Nunes) [RHEL-147786]
|
|
- usb: host: tegra: Remove manual wake IRQ disposal (Desnes Nunes) [RHEL-147786]
|
|
- usb: host: xhci-tegra: Use platform_get_irq_optional() for wake IRQs (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: tegra: Support USB wakeup function for Tegra234 (Desnes Nunes) [RHEL-147786]
|
|
- usb: udc: Add trace event for usb_gadget_set_state (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: tcpci: add wakeup support (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: extcon: linux,extcon-usb-gpio: GPIO must be provided (Desnes Nunes) [RHEL-147786]
|
|
- redhat/configs: Adding CONFIG_EXTCON_MAX14526 (Desnes Nunes) [RHEL-147786]
|
|
- extcon: max14526: depends on I2C to prevent build warning/errors (Desnes Nunes) [RHEL-147786]
|
|
- extcon: max14526: avoid defined but not used warning (Desnes Nunes) [RHEL-147786]
|
|
- extcon: Add basic support for Maxim MAX14526 MUIC (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: extcon: Document Maxim MAX14526 MUIC (Desnes Nunes) [RHEL-147786]
|
|
- usb: gadget: tegra-xudc: Remove redundant ternary operators (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: support eUSB2 double bandwidth large isoc URB frames (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: Add host support for eUSB2 double isochronous bandwidth devices (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: Introduce usb_endpoint_is_hs_isoc_double() (Desnes Nunes) [RHEL-147786]
|
|
- usb: xhci: Use usb_endpoint_max_periodic_payload() (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: Add a function to get USB version independent periodic payload (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: eUSB2 companion descriptor is for isoc IN endpoints only (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: Parse eUSB2 companion descriptors for high speed devices only (Desnes Nunes) [RHEL-147786]
|
|
- usb: core: Use le16_to_cpu() to read __le16 value in usb_parse_endpoint() (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: ucsi: Add check for UCSI version (Desnes Nunes) [RHEL-147786]
|
|
- usb: host: xhci-tegra: Remove redundant ternary operators (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: IXP4xx UDC bindings (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: Refactor dwc3_mode_show (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: Add trace event for dwc3_set_prtcap (Desnes Nunes) [RHEL-147786]
|
|
- usb: storage: realtek_cr: Simplify residue calculation in rts51x_bulk_transport() (Desnes Nunes) [RHEL-147786]
|
|
- usb: misc: Update link to EHSET pdf doc (Desnes Nunes) [RHEL-147786]
|
|
- usb: usblp: Use min_t() to improve usblp_read() (Desnes Nunes) [RHEL-147786]
|
|
- USB: serial: oti6858: remove extranenous ; after comment (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Use string choices helpers (Desnes Nunes) [RHEL-147786]
|
|
- mmc: rtsx_usb_sdmmc: use modern PM macros (Desnes Nunes) [RHEL-147786]
|
|
- mmc: rtsx_usb_sdmmc: Fix uninitialized variable issue (Desnes Nunes) [RHEL-147786]
|
|
- Documentation: driver-api: usb: Limit toctree depth (Desnes Nunes) [RHEL-147786]
|
|
- misc: rtsx: usb card reader: add OCP support (Desnes Nunes) [RHEL-147786]
|
|
- memstick: Add timeout to prevent indefinite waiting (Desnes Nunes) [RHEL-147786]
|
|
- misc: rtsx_pci: Add separate CD/WP pin polarity reversal support (Desnes Nunes) [RHEL-147786]
|
|
- usb: gadget: f_ncm: Fix MAC assignment NCM ethernet (Desnes Nunes) [RHEL-147786]
|
|
- USB: Check no positive return values from pm_runtime_resume_and_get() (Desnes Nunes) [RHEL-147786]
|
|
- usb: typec: ucsi: Add support for READ_POWER_LEVEL command (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Use is_pciehp instead of is_hotplug_bridge (Desnes Nunes) [RHEL-147786]
|
|
- PCI: Move is_pciehp check out of pciehp_is_native() (Desnes Nunes) [RHEL-147786]
|
|
- PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge (Desnes Nunes) [RHEL-147786]
|
|
- PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge (Desnes Nunes) [RHEL-147786]
|
|
- PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports (Desnes Nunes) [RHEL-147786]
|
|
- PCI: Allow PCI bridges to go to D3Hot on all non-x86 (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: usb: Drop duplicate nvidia,tegra20-ehci.txt (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: qcom: Remove extcon functionality from glue layer (Desnes Nunes) [RHEL-147786]
|
|
- USB: lower "Device is not authorized for usage" message to info (Desnes Nunes) [RHEL-147786]
|
|
- usb: dwc3: qcom: Add shutdown handler (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Use Linux Foundation IDs for XDomain discovery (Desnes Nunes) [RHEL-147786]
|
|
- phy: hisilicon: hi6220-usb: drop unused module alias (Desnes Nunes) [RHEL-147786]
|
|
- dt-bindings: phy: fsl,imx8mq-usb: Drop 'db' suffix duplicating dtschema (Desnes Nunes) [RHEL-147786]
|
|
- thunderbolt: Compare HMAC values in constant time (Desnes Nunes) [RHEL-147786]
|
|
- s390/ap: Expose ap_bindings_complete_count counter via sysfs (Mete Durlu) [RHEL-155897]
|
|
- redhat: genlog: add new JIRA cloud server hostname (Jan Stancek)
|
|
- ucount: check for CAP_SYS_RESOURCE using ns_capable_noaudit() (Ondrej Mosnacek) [RHEL-135610]
|
|
- ipc: don't audit capability check in ipc_permissions() (Ondrej Mosnacek) [RHEL-135610]
|
|
- x86/kexec: Copy ACPI root pointer address from config table (Baoquan He) [RHEL-130927]
|
|
- redhat: update RHEL_MINOR version for start of RHEL-9.9 development (Jarod Wilson)
|
|
- fs: use debug-only asserts around fd allocation and install (Ian Kent) [RHEL-133537]
|
|
- fs: fix fd table size alignment properly (Ian Kent) [RHEL-133537]
|
|
- fs: fd tables have to be multiples of BITS_PER_LONG (Ian Kent) [RHEL-133537]
|
|
- fs/file: fix the check in find_next_fd() (Ian Kent) [RHEL-133537]
|
|
- smb: client: fix oops due to uninitialised var in smb2_unlink() (Paulo Alcantara) [RHEL-153749]
|
|
- smb/client: remove unused SMB311_posix_query_info() (Paulo Alcantara) [RHEL-153749]
|
|
- smb/client: fix buffer size for smb311_posix_qinfo in SMB311_posix_query_info() (Paulo Alcantara) [RHEL-153749]
|
|
- smb/client: fix buffer size for smb311_posix_qinfo in smb2_compound_op() (Paulo Alcantara) [RHEL-153749]
|
|
- i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock" (David Arcari) [RHEL-153431]
|
|
- x86/boot: Handle relative CONFIG_EFI_SBAT_FILE file paths (Jan Stancek) [RHEL-150459]
|
|
- ice: fix page leak for zero-size Rx descriptors (Petr Oros) [RHEL-152865]
|
|
- nfsd: use correct loop termination in nfsd4_revoke_states() (Olga Kornievskaia) [RHEL-117260]
|
|
- nfsd: check that server is running in unlock_filesystem (Olga Kornievskaia) [RHEL-117260]
|
|
- nfsd: add list_head nf_gc to struct nfsd_file (Roberto Bergantinos Corpas) [RHEL-152061]
|
|
- smb: client: fix broken multichannel with krb5+signing (Paulo Alcantara) [RHEL-143362]
|
|
- autofs: use wake_up() instead of wake_up_interruptible(() (Ian Kent) [RHEL-148438]
|
|
- autofs: fix memory leak of waitqueues in autofs_catatonic_mode (Ian Kent) [RHEL-148438] {CVE-2023-54134}
|
|
- cpufreq: intel_pstate: Fix crash during turbo disable (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Eliminate some code duplication (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Use mutex guard for driver locking (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Add Diamond Rapids OOB mode support (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Improve printing of debug messages (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: hybrid: Adjust energy model rules (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Add and use hybrid_has_l3() (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Add and use hybrid_get_cpu_type() (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Use likely() optimization in intel_pstate_sample() (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Enable HWP without EPP if DEC is enabled (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Adjust frequency percentage computations (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Rearrange freq QoS updates using __free() (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Remove EPB-related code (David Arcari) [RHEL-128576]
|
|
- cpufreq: intel_pstate: Rearrange variable declaration involving __free() (David Arcari) [RHEL-128576]
|
|
- tools/power cpupower: Show C0 in idle-info dump (David Arcari) [RHEL-128578]
|
|
- tools/power cpupower: Reset errno before strtoull() (David Arcari) [RHEL-128578]
|
|
- tools/cpupower: Use strcspn() to strip trailing newline (David Arcari) [RHEL-128578]
|
|
- tools/cpupower: Fix inverted APERF capability check (David Arcari) [RHEL-128578]
|
|
- cpupower: idle_monitor: fix incorrect value logged after stop (David Arcari) [RHEL-128578]
|
|
- tools/cpupower: Fix incorrect size in cpuidle_state_disable() (David Arcari) [RHEL-128578]
|
|
- tools/cpupower: fix error return value in cpupower_write_sysfs() (David Arcari) [RHEL-128578]
|
|
- intel_idle: Add C-states validation (David Arcari) [RHEL-128587]
|
|
- intel_idle: Add cmdline option to adjust C-states table (David Arcari) [RHEL-128587]
|
|
- intel_idle: Remove unnecessary address-of operators (David Arcari) [RHEL-128587]
|
|
- intel_idle: Remove unused driver version constant (David Arcari) [RHEL-128587]
|
|
- intel_idle: Remove the 'preferred_cstates' parameter (David Arcari) [RHEL-128587]
|
|
- intel_idle: Initialize sysfs after cpuidle driver initialization (David Arcari) [RHEL-128587]
|
|
- ALSA: aloop: Fix racy access at PCM trigger (CKI Backport Bot) [RHEL-150882] {CVE-2026-23191}
|
|
- powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory (Mamatha Inamdar) [RHEL-149742]
|
|
- NFSD: Fix permission check for read access to executable-only files (Scott Mayhew) [RHEL-150983]
|
|
- net/handshake: duplicate handshake cancellations leak socket (Scott Mayhew) [RHEL-150978]
|
|
- NFSv4: Check for delegation validity in nfs_start_delegation_return_locked() (Lucas Oakley) [RHEL-148690]
|
|
- PCI/sysfs: Calculate bin_attribute size through bin_size() (Myron Stowe) [RHEL-137250]
|
|
- x86/kvm: Avoid freeing stack-allocated node in kvm_async_pf_queue_task (Ryosuke Yasuoka) [RHEL-125085]
|
|
- tools headers: Sync uapi/asm-generic/socket.h with the kernel sources (Davide Caratti) [RHEL-132649]
|
|
- selftests: txtimestamp: add SCM_TS_OPT_ID test (Davide Caratti) [RHEL-132649]
|
|
- net_tstamp: add SCM_TS_OPT_ID for RAW sockets (Davide Caratti) [RHEL-132649]
|
|
- net_tstamp: add SCM_TS_OPT_ID to provide OPT_ID in control message (Davide Caratti) [RHEL-132649]
|
|
- net-timestamp: make sk_tskey more predictable in error path (Davide Caratti) [RHEL-132649]
|
|
- net-timestamp: extend SOF_TIMESTAMPING_OPT_ID to HW timestamps (Davide Caratti) [RHEL-132649]
|
|
- ipv6: drop feature RTAX_FEATURE_ALLFRAG (Davide Caratti) [RHEL-132649]
|
|
- smc: Fix use-after-free in __pnet_find_base_ndev(). (Mete Durlu) [RHEL-126894] {CVE-2025-40064}
|
|
- RDMA/bnxt_re: convert timeouts to secs_to_jiffies() (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix missing error handling for tx_queue (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix the condition check while programming congestion control (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix buffer overflow in debugfs code (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Congestion control settings using debugfs hook (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Use macro instead of hard coded value (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Support 2G message size (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Fix size of uverbs_copy_to() in BNXT_RE_METHOD_GET_TOGGLE_MEM (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
- RDMA/bnxt_re: Support extended stats for Thor2 VF (Sreekanth Reddy) [RHEL-108696 RHEL-96539]
|
|
|
|
|
|
###
|
|
# The following Emacs magic makes C-c C-e use UTC dates.
|
|
# Local Variables:
|
|
# rpm-change-log-uses-utc: t
|
|
# End:
|
|
###
|