814de1d1e5
* Thu Oct 19 2023 Scott Weaver <scweaver@redhat.com> [5.14.0-378.el9]
- sunvnet: fix sparc64 build error after gso code split (Ivan Vecera) [RHEL-12679]
- net: move gso declarations and functions to their own files (Ivan Vecera) [RHEL-12679]
- net: introduce and use skb_frag_fill_page_desc() (Ivan Vecera) [RHEL-12625]
- x86/microcode/AMD: Rip out static buffers (David Arcari) [RHEL-10030]
- x86/microcode/AMD: Load late on both threads too (David Arcari) [RHEL-10030]
- x86/microcode/amd: Remove unneeded pointer arithmetic (David Arcari) [RHEL-10030]
- x86/microcode/AMD: Get rid of __find_equiv_id() (David Arcari) [RHEL-10030]
- docs: move x86 documentation into Documentation/arch/ (David Arcari) [RHEL-10030]
- x86/microcode/AMD: Handle multiple glued containers properly (David Arcari) [RHEL-10030]
- md/raid5: release batch_last before waiting for another stripe_head (Nigel Croxon) [RHEL-12455]
- md: replace deprecated strncpy with memcpy (Nigel Croxon) [RHEL-12455]
- md: don't check 'mddev->pers' and 'pers->quiesce' from suspend_lo_store() (Nigel Croxon) [RHEL-12455]
- md: don't check 'mddev->pers' from suspend_hi_store() (Nigel Croxon) [RHEL-12455]
- md-bitmap: suspend array earlier in location_store() (Nigel Croxon) [RHEL-12455]
- md-bitmap: remove the checking of 'pers->quiesce' from location_store() (Nigel Croxon) [RHEL-12455]
- md: don't rely on 'mddev->pers' to be set in mddev_suspend() (Nigel Croxon) [RHEL-12455]
- md: initialize 'writes_pending' while allocating mddev (Nigel Croxon) [RHEL-12455]
- md: initialize 'active_io' while allocating mddev (Nigel Croxon) [RHEL-12455]
- md: delay remove_and_add_spares() for read only array to md_start_sync() (Nigel Croxon) [RHEL-12455]
- md: factor out a helper rdev_addable() from remove_and_add_spares() (Nigel Croxon) [RHEL-12455]
- md: factor out a helper rdev_is_spare() from remove_and_add_spares() (Nigel Croxon) [RHEL-12455]
- md: factor out a helper rdev_removeable() from remove_and_add_spares() (Nigel Croxon) [RHEL-12455]
- md: delay choosing sync action to md_start_sync() (Nigel Croxon) [RHEL-12455]
- md: factor out a helper to choose sync action from md_check_recovery() (Nigel Croxon) [RHEL-12455]
- md: use separate work_struct for md_start_sync() (Nigel Croxon) [RHEL-12455]
- md: Put the right device in md_seq_next (Nigel Croxon) [RHEL-12455]
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU (Hangbin Liu) [RHEL-10448 RHEL-10449] {CVE-2023-42752}
- Enable CONFIG_DPLL (Petr Oros) [2232515]
- ice: implement dpll interface to control cgu (Petr Oros) [2232515]
- ice: add admin commands to access cgu configuration (Petr Oros) [2232515]
- netdev: expose DPLL pin handle for netdevice (Petr Oros) [2232515]
- dpll: netlink: Add DPLL framework base functions (Petr Oros) [2232515]
- dpll: core: Add DPLL framework base functions (Petr Oros) [2232515]
- dpll: spec: Add Netlink spec in YAML (Petr Oros) [2232515]
- dpll: documentation on DPLL subsystem interface (Petr Oros) [2232515]
- redhat/configs: arm64: modularize arm system pmu (Mark Salter) [RHEL-2042]
- perf/arm_cspmu: Clean up ACPI dependency (Mark Salter) [RHEL-1851]
- perf/arm_cspmu: Decouple APMT dependency (Mark Salter) [RHEL-1851]
- ACPI/APMT: Don't register invalid resource (Mark Salter) [RHEL-1851]
- vxlan: Expose helper vxlan_build_gbp_hdr (Izabela Bakollari) [RHEL-5077]
- vxlan: Remove unused argument from vxlan_build_gbp_hdr( ) and vxlan_build_gpe_hdr( ) (Izabela Bakollari) [RHEL-5077]
- perf/x86/amd: Do not WARN() on every IRQ (Michael Petlan) [RHEL-12341]
- bio-integrity: create multi-page bvecs in bio_integrity_add_page() (Ming Lei) [RHEL-13714]
- bio-integrity: cleanup adding integrity pages to bip's bvec. (Ming Lei) [RHEL-13714]
- bio-integrity: update the payload size in bio_integrity_add_page() (Ming Lei) [RHEL-13714]
- block: make bvec_try_merge_hw_page() non-static (Ming Lei) [RHEL-13714]
- block: don't pass a bio to bio_try_merge_hw_seg (Ming Lei) [RHEL-13714]
- block: move the bi_size update out of __bio_try_merge_page (Ming Lei) [RHEL-13714]
- block: downgrade a bio_full call in bio_add_page (Ming Lei) [RHEL-13714]
- block: move the bi_size overflow check in __bio_try_merge_page (Ming Lei) [RHEL-13714]
- block: move the bi_vcnt check out of __bio_try_merge_page (Ming Lei) [RHEL-13714]
- block: move the BIO_CLONED checks out of __bio_try_merge_page (Ming Lei) [RHEL-13714]
- block: use SECTOR_SHIFT bio_add_hw_page (Ming Lei) [RHEL-13714]
- block: tidy up the bio full checks in bio_add_hw_page (Ming Lei) [RHEL-13714]
- block: kmsan: skip bio block merging logic for KMSAN (Ming Lei) [RHEL-13714]
- thermal: intel: powerclamp: fix mismatch in get function for max_idle (David Arcari) [RHEL-2816]
- net: stmmac: dwmac-qcom-ethqos: Use max frequency for clk_ptp_ref (Andrew Halaney) [RHEL-904]
- net: stmmac: Make ptp_clk_freq_config variable type explicit (Andrew Halaney) [RHEL-904]
- net: stmmac: don't reject VLANs when IFF_PROMISC is set (Andrew Halaney) [RHEL-904]
- can: af_can: fix NULL pointer dereference in can_rcv_filter (Ricardo Robaina) [RHEL-6428 RHEL-7052] {CVE-2023-2166}
Resolves: rhbz#2232515, RHEL-10030, RHEL-10448, RHEL-10449, RHEL-12341, RHEL-12455, RHEL-12625, RHEL-12679, RHEL-13714, RHEL-1851, RHEL-2042, RHEL-2816, RHEL-5077, RHEL-6428, RHEL-7052, RHEL-904
Signed-off-by: Scott Weaver <scweaver@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 4
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 378
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|