kernel/0001-USB-pci-quirks-Add-Raspberry-Pi-4-quirk.patch
Justin M. Forbes 68dd5fcadc * Wed Apr 29 2020 Justin M. Forbes <jforbes@fedoraproject.org> 5.7.0-0.rc3.20200428git51184ae37e05.1
- 51184ae37e05 rebase
Resolves: rhbz#

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
2020-04-29 09:22:36 -05:00

73 lines
2.4 KiB
Diff

From 8a98f76ee1da2185f8e77a96d17d18ffb813a5e7 Mon Sep 17 00:00:00 2001
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Date: Tue, 10 Mar 2020 13:52:42 +0100
Subject: [PATCH] USB: pci-quirks: Add Raspberry Pi 4 quirk
On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
loaded directly from an EEPROM or, if not present, by the SoC's
VideCore. Inform VideCore that VL805 was just reset.
Also, as this creates a dependency between XHCI_PCI and VideoCore's
firmware interface, reflect that on the firmware interface Kconfg.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
drivers/firmware/Kconfig | 1 +
drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 8007d4aa76dc..7ca346d3d337 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -180,6 +180,7 @@ config ISCSI_IBFT
config RASPBERRYPI_FIRMWARE
tristate "Raspberry Pi Firmware Driver"
depends on BCM2835_MBOX
+ default XHCI_PCI
help
This option enables support for communicating with the firmware on the
Raspberry Pi.
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index beb2efa71341..0dc34668bb2a 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -16,6 +16,9 @@
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
#include "pci-quirks.h"
#include "xhci-ext-caps.h"
@@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
static void quirk_usb_early_handoff(struct pci_dev *pdev)
{
+ int ret;
+
/* Skip Netlogic mips SoC's internal PCI USB controller.
* This device does not need/support EHCI/OHCI handoff
*/
if (pdev->vendor == 0x184e) /* vendor Netlogic */
return;
+
+ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
+ ret = rpi_firmware_init_vl805(pdev);
+ if (ret) {
+ /* Firmware might be outdated, or something failed */
+ dev_warn(&pdev->dev,
+ "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n",
+ ret);
+ }
+ }
+
if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
--
2.26.2