5d8b3e4c0d
* Thu Sep 12 2024 Rado Vrbovsky <rvrbovsk@redhat.com> [5.14.0-508.el9]
- usb: xhci: prevent potential failure in handle_tx_event() for Transfer events without TRB (Desnes Nunes) [RHEL-52378] {CVE-2024-42226}
- redhat: set defaults for RHEL 9.5 (Lucas Zampieri)
- redhat/configs: Make CONFIG_REGULATOR_GPIO built-in (Luiz Capitulino) [RHEL-21095]
- redhat/configs: enable a bunch of regulators (Luiz Capitulino) [RHEL-21095]
- md-cluster: fix no recovery job when adding/re-adding a disk (Nigel Croxon) [RHEL-46615]
- md-cluster: fix hanging issue while a new disk adding (Nigel Croxon) [RHEL-46615]
- md/raid5: recheck if reshape has finished with device_lock held (Nigel Croxon) [RHEL-46615]
- md: Don't wait for MD_RECOVERY_NEEDED for HOT_REMOVE_DISK ioctl (Nigel Croxon) [RHEL-46615]
- md-cluster: Constify struct md_cluster_operations (Nigel Croxon) [RHEL-46615]
- md/raid5: fix spares errors about rcu usage (Nigel Croxon) [RHEL-46615]
- md: pass in max_sectors for pers->sync_request() (Nigel Croxon) [RHEL-46615]
- md: factor out helpers for different sync_action in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: replace last_sync_action with new enum type (Nigel Croxon) [RHEL-46615]
- md: use new helpers in md_do_sync() (Nigel Croxon) [RHEL-46615]
- md: don't fail action_store() if sync_thread is not registered (Nigel Croxon) [RHEL-46615]
- md: remove parameter check_seq for stop_sync_thread() (Nigel Croxon) [RHEL-46615]
- md: replace sysfs api sync_action with new helpers (Nigel Croxon) [RHEL-46615]
- md: factor out helper to start reshape from action_store() (Nigel Croxon) [RHEL-46615]
- md: add new helpers for sync_action (Nigel Croxon) [RHEL-46615]
- md: add a new enum type sync_action (Nigel Croxon) [RHEL-46615]
- md: rearrange recovery_flags (Nigel Croxon) [RHEL-46615]
- md/md-bitmap: fix writing non bitmap pages (Nigel Croxon) [RHEL-46615]
- md: make md_flush_request() more readable (Nigel Croxon) [RHEL-46615]
- md: change the return value type of md_write_start to void (Nigel Croxon) [RHEL-46615]
- md: do not delete safemode_timer in mddev_suspend (Nigel Croxon) [RHEL-46615]
- lib: objagg: Fix general protection fault (Waiman Long) [RHEL-54790 RHEL-54793] {CVE-2024-43846}
- Revert "x86/topology: Switch over to GENERIC_CPU_DEVICES" (David Arcari) [RHEL-58031]
- Revert "x86/topology: use weak version of arch_unregister_cpu()" (David Arcari) [RHEL-58031]
- Revert "x86/topology: convert to use arch_cpu_is_hotpluggable()" (David Arcari) [RHEL-58031]
- Revert "x86/cpu: Move leftover contents of topology.c to setup.c" (David Arcari) [RHEL-58031]
- x86/resctrl: Remove redundant variable in mbm_config_write_domain() (David Arcari) [RHEL-57701]
- x86/resctrl: Read supported bandwidth sources from CPUID (David Arcari) [RHEL-57701]
- x86/resctrl: Remove hard-coded memory bandwidth limit (David Arcari) [RHEL-57701]
Resolves: RHEL-21095, RHEL-46615, RHEL-52378, RHEL-54790, RHEL-54793, RHEL-57701, RHEL-58031
Signed-off-by: Rado Vrbovsky <rvrbovsk@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 6
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 508
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|