5806997b43
* Fri Feb 17 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-277.el9]
- virtio_net: notify MAC address change on device initialization (Laurent Vivier) [2153210]
- virtio_net: disable VIRTIO_NET_F_STANDBY if VIRTIO_NET_F_MAC is not set (Laurent Vivier) [2153210]
- virtio-net: fix race between ndo_open() and virtio_device_ready() (Laurent Vivier) [2153210]
- x86/hyperv: Remove unregister syscore call from Hyper-V cleanup (Mohammed Gamal) [2168542]
- drm/ast: Fix start address computation (Jocelyn Falempe) [2166219]
- arm64-64k: Increase max NR_IRQS from 64+8192 to 2^^19 (Donald Dutile) [2166450]
- thunderbolt: Add DP OUT resource when DP tunnel is discovered (Desnes Nunes) [2107603]
- net: sched: fix race condition in qdisc_graft() (Davide Caratti) [2165745] {CVE-2023-0590}
- xfs: drop write error injection is unfixable, remove it (Carlos Maiolino) [2155605]
- xfs: use iomap_valid method to detect stale cached iomaps (Carlos Maiolino) [2155605]
- iomap: write iomap validity checks (Carlos Maiolino) [2155605]
- xfs: xfs_bmap_punch_delalloc_range() should take a byte range (Carlos Maiolino) [2155605]
- iomap: buffered write failure should not truncate the page cache (Carlos Maiolino) [2155605]
- xfs,iomap: move delalloc punching to iomap (Carlos Maiolino) [2155605]
- xfs: use byte ranges for write cleanup ranges (Carlos Maiolino) [2155605]
- xfs: punching delalloc extents on write failure is racy (Carlos Maiolino) [2155605]
- xfs: write page faults in iomap are not buffered writes (Carlos Maiolino) [2155605]
- pinctrl: qcom: remove duplicate included header files (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc8280xp: Rectify UFS reset pins (Alessandro Carminati) [2164821]
- pinctrl: qcom: lpass-lpi: Add missed bitfield.h (Alessandro Carminati) [2164821]
- arm64: dts: qcom: sc7180: revert "arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor" (Alessandro Carminati) [2164821]
- pinctrl: qcom: sdm670: change sdm670_reserved_gpios to static (Alessandro Carminati) [2164821]
- pinctrl: qcom: Avoid glitching lines when we first mux to output (Alessandro Carminati) [2164821]
- pinctrl: qcom: add sdm670 pinctrl (Alessandro Carminati) [2164821]
- pinctrl: qcom: do not reinitialize gpio valid mask (Alessandro Carminati) [2164821]
- pinctrl: qcom: Add missing header(s) (Alessandro Carminati) [2164821]
- pinctrl: qcom: restrict drivers per ARM/ARM64 (Alessandro Carminati) [2164821]
- pinctrl: qcom: spmi-gpio: Add compatible for PM7250B (Alessandro Carminati) [2164821]
- pinctrl: qcom: spmi-gpio: Fix the GPIO strength mapping (Alessandro Carminati) [2164821]
- pinctrl: qcom: spmi-gpio: add support for LV_VIN2 and MV_VIN3 subtypes (Alessandro Carminati) [2164821]
- pinctrl: qcom: spmi-gpio: Make irqchip immutable (Alessandro Carminati) [2164821]
- pinctrl: qcom: Add sc8280xp lpass lpi pinctrl driver (Alessandro Carminati) [2164821]
- pinctrl: qcom: Add sm8450 lpass lpi pinctrl driver (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc8180x: Fix wrong pin numbers (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map (Alessandro Carminati) [2164821]
- pinctrl: qcom: sm8250: Fix PDC map (Alessandro Carminati) [2164821]
- pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM (Alessandro Carminati) [2164821]
- pinctrl: qcom: Add SM6375 TLMM driver (Alessandro Carminati) [2164821]
- pinctrl: qcom-pmic-gpio: add support for PMP8074 (Alessandro Carminati) [2164821]
- gpio: thunderx: Don't directly include asm-generic/msi.h (Alessandro Carminati) [2164821]
- gpio: Remove dynamic allocation from populate_parent_alloc_arg() (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc7280: Fix compile bug (Alessandro Carminati) [2164821]
- pinctrl: qcom: Add pinctrl driver for MSM8909 (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc7280: Fix compile bug (Alessandro Carminati) [2164821]
- pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed (Alessandro Carminati) [2164821]
- pinctrl: qcom: sc7280: Add clock optional check for ADSP bypass targets (Alessandro Carminati) [2164821]
- pinctrl: qcom: spmi-gpio: Add pm8226 compatibility (Alessandro Carminati) [2164821]
Resolves: rhbz#2153210, rhbz#2168542, rhbz#2166219, rhbz#2166450, rhbz#2107603, rhbz#2165745, rhbz#2155605, rhbz#2164821
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 277
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|