53b61c1f3b
* Wed May 14 2025 Augusto Caringi <acaringi@redhat.com> [5.14.0-585.el9]
- dmaengine: amd: qdma: Remove using the private get and set dma_ops APIs (Jerry Snitselaar) [RHEL-78706]
- dmaengine: Revert "dmaengine: qcom: bam_dma: Avoid writing unavailable register" (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Enable Function Level Reset (FLR) for halt (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Refactor halt handler (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Add idxd_device_config_save() and idxd_device_config_restore() helpers (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Binding and unbinding IDXD device and driver (Jerry Snitselaar) [RHEL-78706]
- bitmap: Define a cleanup function for bitmaps (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Add idxd_pci_probe_alloc() helper (Jerry Snitselaar) [RHEL-78706]
- dmaengine: qcom: gpi: Add GPI immediate DMA support for SPI protocol (Jerry Snitselaar) [RHEL-78706]
- dmaengine: bcm2835-dma: Prevent suspend if DMA channel is busy (Jerry Snitselaar) [RHEL-78706]
- dmaengine: ti: k3-udma: Add support for J722S CSI BCDMA (Jerry Snitselaar) [RHEL-78706]
- dmaengine: ti: edma: fix OF node reference leaks in edma_driver (Jerry Snitselaar) [RHEL-78706]
- dmaengine: ti: edma: make the loop condition simpler in edma_probe() (Jerry Snitselaar) [RHEL-78706]
- dmaengine: qcom: bam_dma: Avoid writing unavailable register (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Remove unused idxd_(un)register_bus_type (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Add a new IAA device ID on Panther Lake family platforms (Jerry Snitselaar) [RHEL-47414]
- dmaengine: sh: rcar-dmac: add comment for r8a779a0 compatible (Jerry Snitselaar) [RHEL-78706]
- dmaengine: Move AMD PTDMA driver to amd directory (Jerry Snitselaar) [RHEL-78706]
- redhat/configs: Add CONFIG_AMD_QDMA (Jerry Snitselaar) [RHEL-78706]
- dmaengine: amd: qdma: Add AMD QDMA driver (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Remove a useless mutex (Jerry Snitselaar) [RHEL-78706]
- dmaengine: fix typo in the comment (Jerry Snitselaar) [RHEL-78706]
- dmaengine: idxd: Move DSA/IAA device IDs to IDXD driver (Jerry Snitselaar) [RHEL-78706]
- dmaengine: acpi: Clean up headers (Jerry Snitselaar) [RHEL-78706]
- dmaengine: acpi: Simplify devm_acpi_dma_controller_register() (Jerry Snitselaar) [RHEL-78706]
- dmaengine: acpi: Drop unused devm_acpi_dma_controller_free() (Jerry Snitselaar) [RHEL-78706]
- dmaengine: sh: rz-dmac: add r7s72100 support (Jerry Snitselaar) [RHEL-78706]
- dmaengine: sh: Kconfig: Make RZ_DMAC depend on ARCH_RZG2L (Jerry Snitselaar) [RHEL-78706]
- dmaengine: sh: Kconfig: Add ARCH_R9A07G054 dependency for RZ_DMAC config option (Jerry Snitselaar) [RHEL-78706]
- nvme: print firmware bug note for non-unique identifiers (Bryan Gurney) [RHEL-89350]
- nvme-pci: add BOGUS_NID quirk for Samsung PM1733 (Bryan Gurney) [RHEL-89350]
- vsock: Orphan socket after transport release (Jon Maloy) [RHEL-81484] {CVE-2025-21756}
- vsock: Keep the binding until socket destruction (Jon Maloy) [RHEL-81484] {CVE-2025-21756}
- bpf, vsock: Invoke proto::close on close() (Jon Maloy) [RHEL-81484] {CVE-2025-21756}
- RDMA/rxe: Fix the qp flush warnings in req (CKI Backport Bot) [RHEL-72373] {CVE-2024-53229}
- net: ppp: Add bound checking for skb data on ppp_sync_txmung (Guillaume Nault) [RHEL-89647] {CVE-2025-37749}
- cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode (David Arcari) [RHEL-81770]
- ext4: fix OOB read when checking dotdot dir (CKI Backport Bot) [RHEL-87984] {CVE-2025-37785}
- ionic: add module eeprom channel data to ionic_if and ethtool (Mohammad Heib) [RHEL-88150]
- ionic: support ethtool get_module_eeprom_by_page (Mohammad Heib) [RHEL-88150]
- ionic: extend the QSFP module sprom for more pages (Mohammad Heib) [RHEL-88150]
- ionic: use ee->offset when returning sprom data (Mohammad Heib) [RHEL-88150]
- ionic: no double destroy workqueue (Mohammad Heib) [RHEL-88150]
- ionic: Fix netdev notifier unregister on failure (Mohammad Heib) [RHEL-88150]
- ionic: remove the unused nb_work (Mohammad Heib) [RHEL-88150]
- ionic: add support for QSFP_PLUS_CMIS (Mohammad Heib) [RHEL-88150]
- ionic: add speed defines for 200G and 400G (Mohammad Heib) [RHEL-88150]
- ionic: Translate IONIC_RC_ENOSUPP to EOPNOTSUPP (Mohammad Heib) [RHEL-88150]
- ionic: Use VLAN_ETH_HLEN when possible (Mohammad Heib) [RHEL-88150]
- ionic: add asic codes to firmware interface file (Mohammad Heib) [RHEL-88150]
- hugetlbfs: support idmapped mounts (CKI Backport Bot) [RHEL-35573]
- redhat: create 'systemd-volatile-overlay' addon for UKI (Emanuele Giuseppe Esposito) [RHEL-86487]
- efi: Fix building of efi-pstore when CONFIG_EFI_VARS_PSTORE=m (Lenny Szubowicz) [RHEL-90260]
- ACPI: processor idle: Revert "avoid call to raw_local_irq_disable() from acpi_safe_halt()" (Waiman Long) [RHEL-22238]
- ACPI/HMAT: Move HMAT messages to pr_debug() (Steve Dunnagan) [RHEL-70321]
- cpufreq: Reference count policy in cpufreq_update_limits() (David Arcari) [RHEL-67849]
- cpufreq/amd-pstate: Use scope based cleanup for cpufreq_policy refs [partial] (David Arcari) [RHEL-67849]
- platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation (David Arcari) [RHEL-67849]
- platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver (David Arcari) [RHEL-67849]
- redhat/configs: enable CONFIG_AMD_3D_VCACHE for x86 on RHEL (David Arcari) [RHEL-67849]
- enic: get max rq & wq entries supported by hw, 16K queues (Nelson Escobar) [RHEL-84862]
- enic: cleanup of enic wq request completion path (Nelson Escobar) [RHEL-84862]
- enic: added enic_wq.c and enic_wq.h (Nelson Escobar) [RHEL-84862]
- enic: remove unused function cq_enet_wq_desc_dec (Nelson Escobar) [RHEL-84862]
- enic: enable rq extended cq support (Nelson Escobar) [RHEL-84862]
- enic: enic rq extended cq defines (Nelson Escobar) [RHEL-84862]
- enic: enic rq code reorg (Nelson Escobar) [RHEL-84862]
- enic: Move function from header file to c file (Nelson Escobar) [RHEL-84862]
- enic: add dependency on Page Pool (Nelson Escobar) [RHEL-84862]
- enic: remove copybreak tunable (Nelson Escobar) [RHEL-84862]
- enic: Use the Page Pool API for RX (Nelson Escobar) [RHEL-84862]
- enic: Simplify RX handler function (Nelson Escobar) [RHEL-84862]
- enic: Move RX functions to their own file (Nelson Escobar) [RHEL-84862]
- enic: Fix typo in comment in table indexed by link speed (Nelson Escobar) [RHEL-84862]
- enic: Obtain the Link speed only after the link comes up (Nelson Escobar) [RHEL-84862]
- enic: Move RX coalescing set function (Nelson Escobar) [RHEL-84862]
- enic: Move kdump check into enic_adjust_resources() (Nelson Escobar) [RHEL-84862]
- enic: Move enic resource adjustments to separate function (Nelson Escobar) [RHEL-84862]
- enic: Adjust used MSI-X wq/rq/cq/interrupt resources in a more robust way (Nelson Escobar) [RHEL-84862]
- enic: Allocate arrays in enic struct based on VIC config (Nelson Escobar) [RHEL-84862]
- enic: Save resource counts we read from HW (Nelson Escobar) [RHEL-84862]
- enic: Make MSI-X I/O interrupts come after the other required ones (Nelson Escobar) [RHEL-84862]
- enic: Create enic_wq/rq structures to bundle per wq/rq data (Nelson Escobar) [RHEL-84862]
- enic: Report some per queue statistics in ethtool (Nelson Escobar) [RHEL-84862]
- enic: Report per queue statistics in netdev qstats (Nelson Escobar) [RHEL-84862]
- enic: Collect per queue statistics (Nelson Escobar) [RHEL-84862]
- enic: Use macro instead of static const variables for array sizes (Nelson Escobar) [RHEL-84862]
- enic: add ethtool get_channel support (Nelson Escobar) [RHEL-84862]
- enic: Validate length of nl attributes in enic_set_vf_port (Nelson Escobar) [RHEL-84862]
- enic: Replace hardcoded values for vnic descriptor by defines (Nelson Escobar) [RHEL-84862]
- enic: Avoid false positive under FORTIFY_SOURCE (Nelson Escobar) [RHEL-84862]
- smb: client: Add check for next_buffer in receive_encrypted_standard() (CKI Backport Bot) [RHEL-83243] {CVE-2025-21844}
Resolves: RHEL-22238, RHEL-35573, RHEL-47414, RHEL-67849, RHEL-70321, RHEL-72373, RHEL-78706, RHEL-81484, RHEL-81770, RHEL-83243, RHEL-84862, RHEL-86487, RHEL-87984, RHEL-88150, RHEL-89350, RHEL-89647, RHEL-90260
Signed-off-by: Augusto Caringi <acaringi@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 7
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 585
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|