2d4a3d846d
* Tue Jan 17 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-237.el9] - Revert "stmmac/intel: mark driver as tech preview" (Mark Salter) [2122226] - stmmac: intel: Simplify intel_eth_pci_remove() (Mark Salter) [2122226] - net: stmmac: work around sporadic tx issue on link-up (Mark Salter) [2122226] - stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove() (Mark Salter) [2122226] - net: ethernet: stmicro: stmmac: permit MTU change with interface up (Mark Salter) [2122226] - net: ethernet: stmicro: stmmac: generate stmmac dma conf before open (Mark Salter) [2122226] - net: ethernet: stmicro: stmmac: move dma conf to dedicated struct (Mark Salter) [2122226] - net: ethernet: stmicro: stmmac: first disable all queues and disconnect in release (Mark Salter) [2122226] - net: ethernet: stmicro: stmmac: move queue reset to dedicated functions (Mark Salter) [2122226] - net: phylink: fix SGMII inband autoneg enable (Mark Salter) [2122226] - stmicro/stmmac: fix repeated words in comments (Mark Salter) [2122226] - net: phylink: fix NULL pl->pcs dereference during phylink_pcs_poll_start (Mark Salter) [2122226] - net: phylink: disable PCS polling over major configuration (Mark Salter) [2122226] - net: phylink: remove pcs_ops member (Mark Salter) [2122226] - net: pcs: xpcs: depends on PHYLINK in Kconfig (Mark Salter) [2122226] - net: phylink: add QSGMII support to phylink_mii_c22_pcs_encode_advertisement() (Mark Salter) [2122226] - net: ethernet: stmmac: remove select QCOM_SOCINFO and make it optional (Mark Salter) [2122226] - net: stmmac: make mdio register skips PHY scanning for fixed-link (Mark Salter) [2122226] - stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support (Mark Salter) [2122226] - net: pcs: xpcs: add CL37 1000BASE-X AN support (Mark Salter) [2122226] - stmmac: intel: prepare to support 1000BASE-X phy interface setting (Mark Salter) [2122226] - net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105 (Mark Salter) [2122226] - net: ethernet: stmmac: reset force speed bit for ipq806x (Mark Salter) [2122226] - net: ethernet: stmmac: add missing sgmii configure for ipq806x (Mark Salter) [2122226] - stmmac: dwmac-mediatek: fix resource leak in probe (Mark Salter) [2122226] - net: pcs: xpcs: propagate xpcs_read error to xpcs_get_state_c37_sgmii (Mark Salter) [2122226] - net: stmmac: remove redunctant disable xPCS EEE call (Mark Salter) [2122226] - net: stmmac: fix dma queue left shift overflow issue (Mark Salter) [2122226] - net: stmmac: switch to use interrupt for hw crosstimestamping (Mark Salter) [2122226] - net: stmmac: fix unbalanced ptp clock issue in suspend/resume flow (Mark Salter) [2122226] - net: stmmac: fix pm runtime issue in stmmac_dvr_remove() (Mark Salter) [2122226] - stmmac: dwmac-mediatek: fix clock issue (Mark Salter) [2122226] - net: stmmac: fix leaks in probe (Mark Salter) [2122226] - net: stmmac: dwc-qos: Disable split header for Tegra194 (Mark Salter) [2122226] - stmmac: intel: Fix an error handling path in intel_eth_pci_probe() (Mark Salter) [2122226] - stmmac: intel: Add RPL-P PCI ID (Mark Salter) [2122226] - net: stmmac: use dev_err_probe() for reporting mdio bus registration failure (Mark Salter) [2122226] - net: stmmac: fix out-of-bounds access in a selftest (Mark Salter) [2122226] - net: stmmac: remove unused get_addr() callback (Mark Salter) [2122226] - net: pcs: pcs-xpcs: Convert to mdiobus_c45_read (Mark Salter) [2122226] - net: stmmac: dwmac-imx: comment spelling fix (Mark Salter) [2122226] - stmmac, xsk: Diversify return values from xsk_wakeup call paths (Mark Salter) [2122226] - net: stmmac: stmmac_main: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2122226] - net: stmmac: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Mark Salter) [2122226] - net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe() (Mark Salter) [2122226] - net: stmmac: disable Split Header (SPH) for Intel platforms (Mark Salter) [2122226] - net: stmmac: dwmac-sun8i: add missing of_node_put() in sun8i_dwmac_register_mdio_mux() (Mark Salter) [2122226] - net: ethernet: stmmac: fix write to sgmii_adapter_base (Mark Salter) [2122226] - net: stmmac: Use readl_poll_timeout_atomic() in atomic state (Mark Salter) [2122226] - net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link (Mark Salter) [2122226] - stmmac: dwmac-loongson: change loongson_dwmac_driver from global to static (Mark Salter) [2122226] - net: stmmac: dwmac-qcom-ethqos: Enable RGMII functional clock on resume (Mark Salter) [2122226] - net: stmmac: clean up impossible condition (Mark Salter) [2122226] - stmmac: dwmac-mediatek: add support for mt8195 (Mark Salter) [2122226] - arm64: dts: mt2712: update ethernet device node (Mark Salter) [2122226] - stmmac: dwmac-mediatek: re-arrange clock setting (Mark Salter) [2122226] - stmmac: dwmac-mediatek: Reuse more common features (Mark Salter) [2122226] - stmmac: dwmac-mediatek: add platform level clocks management (Mark Salter) [2122226] - stmmac: intel: Add ADL-N PCI ID (Mark Salter) [2122226] - net: stmmac: switch no PTP HW support message to info level (Mark Salter) [2122226] - net: stmmac: dwmac-qcom-ethqos: Adjust rgmii loopback_en per platform (Mark Salter) [2122226] - net: stmmac: Add support for SM8150 (Mark Salter) [2122226] - net: phylink: use %%pe for printing errors (Mark Salter) [2122226] - stmmac: intel: Enable 2.5Gbps for Intel AlderLake-S (Mark Salter) [2122226] - net: stmmac: optimize locking around PTP clock reads (Mark Salter) [2122226] - net: stmmac: dwmac-sun8i: make clk really gated during rpm suspended (Mark Salter) [2122226] - net: stmmac/xpcs: convert to pcs_validate() (Mark Salter) [2122226] - net: convert users of bitmap_foo() to linkmode_foo() (Mark Salter) [2122226] - net: stmmac: fill in supported_interfaces (Mark Salter) [2122226] - net: xpcs: add support for retrieving supported interface modes (Mark Salter) [2122226] - net: stmmac: fix return value of __setup handler (Mark Salter) [2122226] - net: stmmac: only enable DMA interrupts when ready (Mark Salter) [2122226] - net: stmmac: ensure PTP time register reads are consistent (Mark Salter) [2122226] - net: stmmac: dump gmac4 DMA registers correctly (Mark Salter) [2122226] - net: stmmac: properly handle with runtime pm in stmmac_dvr_remove() (Mark Salter) [2122226] - net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected speed request. (Mark Salter) [2122226] - net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout() (Mark Salter) [2122226] - net: stmmac: skip only stmmac_ptp_register when resume from suspend (Mark Salter) [2122226] - net: stmmac: configure PTP clock source prior to PTP initialization (Mark Salter) [2122226] - net: stmmac: reduce unnecessary wakeups from eee sw timer (Mark Salter) [2122226] - net: stmmac: remove unused members in struct stmmac_priv (Mark Salter) [2122226] - net: stmmac: dwmac-visconti: Fix clock configuration for RMII mode (Mark Salter) [2122226] - net: stmmac: dwmac-visconti: Fix bit definitions for ETHER_CLK_SEL (Mark Salter) [2122226] - net: stmmac: Fix "Unbalanced pm_runtime_enable!" warning (Mark Salter) [2122226] - net: stmmac: dwmac-oxnas: Add support for OX810SE (Mark Salter) [2122226] - net: stmmac: add tc flower filter for EtherType matching (Mark Salter) [2122226] - net: stmmac: bump tc when get underflow error from DMA descriptor (Mark Salter) [2122226] - net: phylink: tidy up disable bit clearing (Mark Salter) [2122226] - net: stmmac: Add platform level debug register dump feature (Mark Salter) [2122226] - stmmac: remove ethtool driver version info (Mark Salter) [2122226] - net: stmmac: perserve TX and RX coalesce value during XDP setup (Mark Salter) [2122226] - net: stmmac: Calculate CDC error only once (Mark Salter) [2122226] - net: phylink: handle NA interface mode in phylink_fwnode_phy_connect() (Mark Salter) [2122226] - net: stmmac: dwmac-qcom-ethqos: add platform level clocks management (Mark Salter) [2122226] - net: stmmac: enhance XDP ZC driver level switching performance (Mark Salter) [2122226] - net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M (Mark Salter) [2122226] - net: stmmac: ptp: fix potentially overflowing expression (Mark Salter) [2122226] - net: stmmac: dwmac-rk: fix oob read in rk_gmac_setup (Mark Salter) [2122226] - net: stmmac: fix tc flower deletion for VLAN priority Rx steering (Mark Salter) [2122226] - net: phy: Add the missing blank line in the phylink_suspend comment (Mark Salter) [2122226] - net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header support (Mark Salter) [2122226] - net: stmmac: Disable Tx queues when reconfiguring the interface (Mark Salter) [2122226] - net: phylink: Force retrigger in case of latched link-fail indicator (Mark Salter) [2122226] - net: phylink: Force link down and retrigger resolve on interface change (Mark Salter) [2122226] - net: stmmac: retain PTP clock time during SIOCSHWTSTAMP ioctls (Mark Salter) [2122226] - stmmac_pci: Fix underflow size in stmmac_rx (Mark Salter) [2122226] - net: stmmac: Fix signed/unsigned wreckage (Mark Salter) [2122226] - net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform (Mark Salter) [2122226] - net: stmmac: allow a tc-taprio base-time of zero (Mark Salter) [2122226] - ethernet: stmmac: use eth_hw_addr_set() (Mark Salter) [2122226] - net: stmmac: selftests: Use kcalloc() instead of kzalloc() (Mark Salter) [2122226] - net: stmmac: fix off-by-one error in sanity check (Mark Salter) [2122226] - net: stmmac: fix gcc-10 -Wrestrict warning (Mark Salter) [2122226] - net: stmmac: dwmac-visconti: Make use of the helper function dev_err_probe() (Mark Salter) [2122226] - net: stmmac: Fix E2E delay mechanism (Mark Salter) [2122226] - net: stmmac: add support for dwmac 3.40a (Mark Salter) [2122226] - dt-bindings: net: snps,dwmac: add dwmac 3.40a IP version (Mark Salter) [2122226] - net: stmmac: fix get_hw_feature() on old hardware (Mark Salter) [2122226] - net: pcs: xpcs: Add Pause Mode support for SGMII and 2500BaseX (Mark Salter) [2122226] - net: stmmac: trigger PCS EEE to turn off on link down (Mark Salter) [2122226] - net: pcs: xpcs: fix incorrect steps on disable EEE (Mark Salter) [2122226] - net: pcs: xpcs: fix incorrect CL37 AN sequence (Mark Salter) [2122226] - net: stmmac: dwmac-rk: Fix ethernet on rk3399 based devices (Mark Salter) [2122226] - net: stmmac: fix EEE init issue when paired with EEE capable PHYs (Mark Salter) [2122226] - net: update NXP copyright text (Mark Salter) [2122226] - net: stmmac: allow CSR clock of 300MHz (Mark Salter) [2122226] - net: stmmac: platform: fix build warning when with !CONFIG_PM_SLEEP (Mark Salter) [2122226] - net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume (Mark Salter) [2122226] - net: stmmac: fix MAC not working when system resume back with WoL active (Mark Salter) [2122226] - stmmac: dwmac-loongson:Fix missing return value (Mark Salter) [2122226] - net: stmmac: Fix overall budget calculation for rxtx_napi (Mark Salter) [2122226] - net: stmmac: add ethtool per-queue irq statistic support (Mark Salter) [2122226] - net: stmmac: add ethtool per-queue statistic framework (Mark Salter) [2122226] - net: stmmac: fix INTR TBU status affecting irq count statistic (Mark Salter) [2122226] - net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe() (Mark Salter) [2122226] Resolves: rhbz#2122226 Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 237
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|