kernel/Makefile.rhelver
Frantisek Hrbata 1a2c98ae6c kernel-5.14.0-163.el9
* Thu Sep 08 2022 Frantisek Hrbata <fhrbata@redhat.com> [5.14.0-163.el9]
- x86/cpu: Add new Raptor Lake CPU model number (David Arcari) [2120362]
- rhel: configs: add config option CONFIG_COMMAND_LINE_SIZE (Mete Durlu) [2060827]
- s390/sclp: reserve memory occupied by sclp early buffer (Mete Durlu) [2060827]
- s390: make command line configurable (Mete Durlu) [2060827]
- s390: support command lines longer than 896 bytes (Mete Durlu) [2060827]
- s390/kexec_file: move kernel image size check (Mete Durlu) [2060827]
- s390/boot: move sclp early buffer from fixed address in asm to C (Mete Durlu) [2060827]
- rhel: set previously unused GPIO config items (Al Stone) [2071835]
- gpio: sim: fix hogs with custom chip labels (Al Stone) [2071835]
- gpio: sim: check the label length when setting up device properties (Al Stone) [2071835]
- gpio: sim: Declare gpio_sim_hog_config_item_ops static (Al Stone) [2071835]
- gpio: sim: fix a typo (Al Stone) [2071835]
- gpio: sim: fix setting and getting multiple lines (Al Stone) [2071835]
- gpio: sim: Use correct order for the parameters of devm_kcalloc() (Al Stone) [2071835]
- gpio: sim: fix the chip_name configfs item (Al Stone) [2071835]
- gpio: xlp: Fix build errors from Netlogic XLP removal (Al Stone) [2071835]
- gpio: virtio: Add IRQ support (Al Stone) [2071835]
- gpio: virtio: remove timeout (Al Stone) [2071835]
- gpiolib: cdev: fix null pointer dereference in linereq_free() (Al Stone) [2071835]
- gpio: mxs: Fix header comment (Al Stone) [2071835]
- gpio: Fix kernel-doc comments to nested union (Al Stone) [2071835]
- gpio: grgpio: Fix device removing (Al Stone) [2071835]
- gpiolib: cdev: Fix kernel doc for struct line (Al Stone) [2071835]
- gpio: dwapb: Don't print error on -EPROBE_DEFER (Al Stone) [2071835]
- gpio: sch: make irq_chip immutable (Al Stone) [2071835]
- gpio: dwapb: Make the irqchip immutable (Al Stone) [2071835]
- gpiolib: cdev: Add hardware timestamp clock type (Al Stone) [2071835]
- drivers: Add hardware timestamp engine (HTE) subsystem (Al Stone) [2071835]
- gpio: tegra186: Add HTE support (Al Stone) [2071835]
- gpiolib: Add HTE support (Al Stone) [2071835]
- hte: Uninitialized variable in hte_ts_get() (Al Stone) [2071835]
- hte: Fix off by one in hte_push_ts_ns() (Al Stone) [2071835]
- hte: Add Tegra HTE test driver (Al Stone) [2071835]
- hte: Add Tegra194 HTE kernel provider (Al Stone) [2071835]
- drivers: Add hardware timestamp engine (HTE) subsystem (Al Stone) [2071835]
- gpiolib: of: fix bounds check for 'gpio-reserved-ranges' (Al Stone) [2071835]
- gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible (Al Stone) [2071835]
- gpio: use raw spinlock for gpio chip shadowed data (Al Stone) [2071835]
- gpio: Request interrupts after IRQ is initialized (Al Stone) [2071835]
- gpiolib: of: Introduce hook for missing gpio-ranges (Al Stone) [2071835]
- gpio: Update TODO to mention immutable irq_chip structures (Al Stone) [2071835]
- gpio: pl061: Make the irqchip immutable (Al Stone) [2071835]
- gpio: tegra186: Make the irqchip immutable (Al Stone) [2071835]
- gpio: Add helpers to ease the transition towards immutable irq_chip (Al Stone) [2071835]
- gpio: Expose the gpiochip_irq_re[ql]res helpers (Al Stone) [2071835]
- gpio: Don't fiddle with irqchips marked as immutable (Al Stone) [2071835]
- gpiolib: Introduce a helper to get first GPIO controller node (Al Stone) [2071835]
- gpiolib: Extract gpio_chip_get_value() wrapper (Al Stone) [2071835]
- gpiolib: Refactor gpiolib_dbg_show() with help of for_each_gpio_desc() (Al Stone) [2071835]
- gpiolib: Split out for_each_gpio_desc() macro (Al Stone) [2071835]
- gpiolib: Embed iterator variable into for_each_gpio_desc_with_flag() (Al Stone) [2071835]
- gpiolib: Move error message out of a spinlock (Al Stone) [2071835]
- gpiolib: Introduce gpiochip_node_count() helper (Al Stone) [2071835]
- gpiolib: Introduce for_each_gpiochip_node() loop helper (Al Stone) [2071835]
- gpiolib: acpi: Convert type for pin to be unsigned (Al Stone) [2071835]
- gpiolib: acpi: use correct format characters (Al Stone) [2071835]
- gpiolib: Get rid of redundant 'else' (Al Stone) [2071835]
- gpio: Restrict usage of GPIO chip irq members before initialization (Al Stone) [2071835]
- gpio: Properly document parent data union (Al Stone) [2071835]
- gpiolib: Use list_first_entry()/list_last_entry() (Al Stone) [2071835]
- gpiolib: acpi: Convert ACPI value of debounce to microseconds (Al Stone) [2071835]
- gpio: tegra186: Add IRQ per bank for Tegra241 (Al Stone) [2071835]
- gpio: Return EPROBE_DEFER if gc->to_irq is NULL (Al Stone) [2071835]
- gpio: tegra186: Fix chip_data type confusion (Al Stone) [2071835]
- gpiolib: sysfs: Simplify edge handling in the code (Al Stone) [2071835]
- gpiolib: sysfs: Move kstrtox() calls outside of the mutex lock (Al Stone) [2071835]
- gpiolib: sysfs: Move sysfs_emit() calls outside of the mutex lock (Al Stone) [2071835]
- gpiolib: make struct comments into real kernel docs (Al Stone) [2071835]
- gpiolib: Simplify error path in gpiod_get_index() when requesting GPIO (Al Stone) [2071835]
- gpiolib: Use short form of ternary operator in gpiod_get_index() (Al Stone) [2071835]
- gpiolib: Introduce for_each_gpio_desc_with_flag() macro (Al Stone) [2071835]
- gpiolib: Never return internal error codes to user space (Al Stone) [2071835]
- gpio: aggregator: Fix calling into sleeping GPIO controllers (Al Stone) [2071835]
- gpio: tegra: Get rid of duplicate of_node assignment (Al Stone) [2071835]
- gpio: dwapb: Switch to use fwnode instead of of_node (Al Stone) [2071835]
- gpiolib: acpi: make fwnode take precedence in struct gpio_chip (Al Stone) [2071835]
- gpio: regmap: Switch to use fwnode instead of of_node (Al Stone) [2071835]
- gpio: tegra186: Add support for Tegra241 (Al Stone) [2071835]
- dt-bindings: gpio: Add Tegra241 support (Al Stone) [2071835]
- gpio: Remove unused local OF node pointers (Al Stone) [2071835]
- gpio: Propagate firmware node from a parent device (Al Stone) [2071835]
- gpio: Setup parent device and get rid of unnecessary of_node assignment (Al Stone) [2071835]
- gpio: Get rid of duplicate of_node assignment in the drivers (Al Stone) [2071835]
- gpiolib: allow line names from device props to override driver names (Al Stone) [2071835]
- gpio: amdpt: add new device ID and 24-pin support (Al Stone) [2071835]
- gpio: tegra186: Add support for Tegra234 (Al Stone) [2071835]
- gpio: sim: new testing module (Al Stone) [2071835]
- gpiolib: of: make fwnode take precedence in struct gpio_chip (Al Stone) [2071835]
- gpiolib: allow to specify the firmware node in struct gpio_chip (Al Stone) [2071835]
- gpiolib: provide gpiod_remove_hogs() (Al Stone) [2071835]
- gpio: sch: fix typo in a comment (Al Stone) [2071835]
- gpiolib: check the 'ngpios' property in core gpiolib code (Al Stone) [2071835]
- gpiolib: improve coding style for local variables (Al Stone) [2071835]
- gpio: aggregator: Add interrupt support (Al Stone) [2071835]
- gpiolib: Let gpiod_add_lookup_table() call gpiod_add_lookup_tables() (Al Stone) [2071835]
- gpio: dwapb: clarify usage of the register file version (Al Stone) [2071835]
- gpio: pch: Cache &pdev->dev to reduce repetition (Al Stone) [2071835]
- gpio: pch: Use .driver_data instead of checking Device IDs again (Al Stone) [2071835]
- gpio: bd70528 Drop BD70528 support (Al Stone) [2071835]
- gpiolib: acpi: Unify debug and other messages format (Al Stone) [2071835]
- gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use (Al Stone) [2071835]
- gpio: mockup: Switch to use kasprintf_strarray() (Al Stone) [2071835]
- gpiolib: acpi: shrink devm_acpi_dev_add_driver_gpios() (Al Stone) [2071835]
- gpiolib: acpi: Remove never used devm_acpi_dev_remove_driver_gpios() (Al Stone) [2071835]
- gpio: xlp: Remove Netlogic XLP variants (Al Stone) [2071835]
- gpio: virtio: Fix sparse warnings (Al Stone) [2071835]
- gpio: clean up Kconfig file (Al Stone) [2071835]
- gpio: Allow per-parent interrupt data (Al Stone) [2071835]
- gpio-amdpt: ACPI: Use the ACPI_COMPANION() macro directly (Al Stone) [2071835]
- gpiolib: acpi: Replace custom code with device_match_acpi_handle() (Al Stone) [2071835]
- gpio: mc33880: Drop if with an always false condition (Al Stone) [2071835]
- gpio: aggregator: Wrap access to gpiochip_fwd.tmp[] (Al Stone) [2071835]
- gpio: tps65218: drop unneeded MODULE_ALIAS (Al Stone) [2071835]
- gpio: max77620: drop unneeded MODULE_ALIAS (Al Stone) [2071835]
- gpio: tegra186: Support multiple interrupts per bank (Al Stone) [2071835]
- gpio: tegra186: Force one interrupt per bank (Al Stone) [2071835]
- gpiolib: acpi: Make set-debounce-timeout failures non fatal (Al Stone) [2071835]
- gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions (Al Stone) [2071835]
- gpio: Add virtio-gpio driver (Al Stone) [2071835]
- gpio: Bulk conversion to generic_handle_domain_irq() (Al Stone) [2071835]
- gpio: dwapb: Get rid of legacy platform data (Al Stone) [2071835]
- gpio: dwapb: Read GPIO base from gpio-base property (Al Stone) [2071835]
- gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs() (Al Stone) [2071835]
- gpiolib: Deduplicate forward declaration in the consumer.h header (Al Stone) [2071835]
- gpio: tegra186: Add ACPI support (Al Stone) [2071835]
- dt-bindings: gpio: Add Tegra234 support (Al Stone) [2071835]
- dt-bindings: gpio: tegra186: Convert to json-schema (Al Stone) [2071835]
- gpiolib: of: constify few local device_node variables (Al Stone) [2071835]
- gpiolib: convert 'devprop_gpiochip_set_names' to support multiple gpiochip banks per device (Al Stone) [2071835]
- devlink: hold the instance lock during eswitch_mode callbacks (Petr Oros) [2101713]
- netdevsim: replace vfs_lock with devlink instance lock (Petr Oros) [2101713]
- netdevsim: replace port_list_lock with devlink instance lock (Petr Oros) [2101713]
- devlink: add explicitly locked flavor of the rate node APIs (Petr Oros) [2101713]
- bnxt: use the devlink instance lock to protect sriov (Petr Oros) [2101713]
- devlink: pass devlink_port to port_split / port_unsplit callbacks (Petr Oros) [2101713]
- devlink: hold the instance lock in port_split / port_unsplit callbacks (Petr Oros) [2101713]
- eth: mlxsw: switch to explicit locking for port registration (Petr Oros) [2101713]
- eth: nfp: replace driver's "pf" lock with devlink instance lock (Petr Oros) [2101713]
- eth: nfp: wrap locking assertions in helpers (Petr Oros) [2101713]
- devlink: expose instance locking and add locked port registering (Petr Oros) [2101713]
- mlxsw: reg: Remove PMTM register (Ivan Vecera) [2101713]
- mlxsw: spectrum: Use PMTDB register to obtain split info (Ivan Vecera) [2101713]
- mlxsw: reg: Add Port Module To local DataBase Register (Ivan Vecera) [2101713]
- mlxsw: spectrum: Use PLLP to get front panel number and split number (Ivan Vecera) [2101713]
- mlxsw: reg: Add Port Local port to Label Port mapping Register (Ivan Vecera) [2101713]
- mlxsw: spectrum: Move port SWID set before core port init (Ivan Vecera) [2101713]
- mlxsw: spectrum: Move port module mapping before core port init (Ivan Vecera) [2101713]
- mlxsw: spectrum: Bump minimum FW version to xx.2008.3326 (Ivan Vecera) [2101713]
- vdpa/mlx5: Initialize CVQ vringh only once (Eugenio Pérez) [2119809]
- vdpa/mlx5: Update Control VQ callback information (Eugenio Pérez) [2119809]
- intel_th: pci: Add Raptor Lake-S CPU support (Michael Petlan) [2040036]
- intel_th: pci: Add Raptor Lake-S PCH support (Michael Petlan) [2040036]
- rhel: usb: remove Conflicts for gadget_unbind_drivers() (Al Stone) [2071830]
- soc: ti: fix wkup_m3_rproc_boot_thread return type (Al Stone) [2071830]
- fbdev: Prevent probing generic drivers if a FB is already registered (Al Stone) [2071830]
- rhel: Enable EFI DXE memory attributes (Al Stone) [2071830]
- rhel: Enable EFI COCO secret (Al Stone) [2071830]
- firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported (Al Stone) [2071830]
- firmware: arm_scmi: Remove all the unused local variables (Al Stone) [2071830]
- efi/x86: libstub: Fix typo in __efi64_argmap* name (Al Stone) [2071830]
- powerpc/64: Include cache.h directly in paca.h (Al Stone) [2071830]
- firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks (Al Stone) [2071830]
- firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary (Al Stone) [2071830]
- video: vga16fb: Only probe for EGA and VGA 16 color graphic cards (Al Stone) [2071830]
- efi: clean up Kconfig dependencies on CONFIG_EFI (Al Stone) [2071830]
- efi/x86: libstub: Make DXE calls mixed mode safe (Al Stone) [2071830]
- edd: simplify the check of 'attr->test' in edd_populate_dir() (Al Stone) [2071830]
- firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle (Al Stone) [2071830]
- printk: stop including cache.h from printk.h (Al Stone) [2071830]
- efi: stub: prefer mirrored memory for randomized allocations (Al Stone) [2071830]
- efi/arm64: libstub: run image in place if randomized by the loader (Al Stone) [2071830]
- efi: libstub: pass image handle to handle_kernel_image() (Al Stone) [2071830]
- efi: libstub: ensure allocated memory to be executable (Al Stone) [2071830]
- efi: libstub: declare DXE services table (Al Stone) [2071830]
- firmware: arm_scmi: Fix late checks on pointer dereference (Al Stone) [2071830]
- firmware: arm_ffa: Remove incorrect assignment of driver_data (Al Stone) [2071830]
- firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe (Al Stone) [2071830]
- firmware: arm_scmi: Support optee shared memory in the optee transport (Al Stone) [2071830]
- firmware: arm_scmi: Add SCMI v3.1 VOLTAGE_LEVEL_SET_COMPLETE (Al Stone) [2071830]
- firmware: arm_scmi: Add SCMI v3.1 clock notifications (Al Stone) [2071830]
- firmware: arm_scmi: Add checks for min/max limits in PERFORMANCE_LIMITS_SET (Al Stone) [2071830]
- firmware: arm_scmi: Add SCMI v3.1 perf power-cost in microwatts (Al Stone) [2071830]
- firmware: arm_scmi: Use common iterators in the perf protocol (Al Stone) [2071830]
- firmware: arm_scmi: Use common iterators in the voltage protocol (Al Stone) [2071830]
- firmware: arm_scmi: Use common iterators in the clock protocol (Al Stone) [2071830]
- firmware: arm_scmi: Add SCMI v3.1 SENSOR_AXIS_NAME_GET support (Al Stone) [2071830]
- firmware: arm_scmi: Use common iterators in the sensor protocol (Al Stone) [2071830]
- firmware: arm_scmi: Add iterators for multi-part commands (Al Stone) [2071830]
- firmware: arm_scmi: Parse clock_enable_latency conditionally (Al Stone) [2071830]
- firmware: arm_scmi: Set clock latency to U32_MAX if it is not supported (Al Stone) [2071830]
- firmware: arm_scmi: Add SCMI v3.1 protocol extended names support (Al Stone) [2071830]
- firmware: arm_scmi: Introduce a common SCMI v3.1 .extended_name_get helper (Al Stone) [2071830]
- firmware: arm_scmi: Split protocol specific definitions in a dedicated header (Al Stone) [2071830]
- firmware: arm_scmi: Remove unneeded NULL termination of clk name (Al Stone) [2071830]
- firmware: arm_scmi: Check CLOCK_RATE_SET_COMPLETE async response (Al Stone) [2071830]
- firmware: arm_scmi: Make name_get operations return a const (Al Stone) [2071830]
- firmware: arm_scmi: Dynamically allocate implemented protocols array (Al Stone) [2071830]
- firmware: arm_scmi: Validate BASE_DISCOVER_LIST_PROTOCOLS response (Al Stone) [2071830]
- firmware: arm_scmi: Fix list protocols enumeration in the base protocol (Al Stone) [2071830]
- firmware: arm_scmi: Make protocols initialisation fail on basic errors (Al Stone) [2071830]
- firmware: arm_ffa: Fix handling of fragmented memory descriptors (Al Stone) [2071830]
- efi: Register efi_secret platform device if EFI secret area is declared (Al Stone) [2071830]
- efi: Save location of EFI confidential computing area (Al Stone) [2071830]
- efi: Move efifb_setup_from_dmi() prototype from arch headers (Al Stone) [2071830]
- efi/cper: Reformat CPER memory error location to more readable (Al Stone) [2071830]
- EDAC/ghes: Unify CPER memory error location reporting (Al Stone) [2071830]
- efi/cper: Add a cper_mem_err_status_str() to decode error description (Al Stone) [2071830]
- firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver (Al Stone) [2071830]
- firmware: arm_scmi: Replace zero-length array with flexible-array member (Al Stone) [2071830]
- firmware: arm_scmi: Fix sorting of retrieved clock rates (Al Stone) [2071830]
- firmware: arm_scmi: Remove clear channel call on the TX channel (Al Stone) [2071830]
- rhel: Configure ARM SCMI SMC transport AtomicEnable (Al Stone) [2071830]
- firmware: sysfb: fix platform-device leak in error path (Al Stone) [2071830]
- pstore: Don't use semaphores in always-atomic-context code (Al Stone) [2071830]
- efi/mokvar: move up init order (Al Stone) [2071830]
- sysfb: Enable boot time VESA graphic mode selection (Al Stone) [2071830]
- sysfb: Make config option dependencies explicit (Al Stone) [2071830]
- efi: fix return value of __setup handlers (Al Stone) [2071830]
- efivars: Respect "block" flag in efivar_entry_set_safe() (Al Stone) [2071830]
- firmware: arm_scmi: Add support for clock_enable_latency (Al Stone) [2071830]
- firmware: arm_scmi: Add atomic support to clock protocol (Al Stone) [2071830]
- firmware: arm_scmi: Support optional system wide atomic-threshold-us (Al Stone) [2071830]
- firmware: arm_scmi: Add atomic mode support to virtio transport (Al Stone) [2071830]
- firmware: arm_scmi: Review virtio free_list handling (Al Stone) [2071830]
- firmware: arm_scmi: Add a virtio channel refcount (Al Stone) [2071830]
- firmware: imx: scu-pd: imx8q: add vpu mu resources (Al Stone) [2071830]
- firmware: imx: add get resource owner api (Al Stone) [2071830]
- firmware: arm_scmi: Remove space in MODULE_ALIAS name (Al Stone) [2071830]
- firmware: arm_scmi: Disable ftrace for Clang Thumb2 builds (Al Stone) [2071830]
- drivers/firmware: Don't mark as busy the simple-framebuffer IO resource (Al Stone) [2071830]
- efi: runtime: avoid EFIv2 runtime services on Apple x86 machines (Al Stone) [2071830]
- efi/libstub: arm64: Fix image check alignment at entry (Al Stone) [2071830]
- virtio: wrap config->reset calls (Al Stone) [2071830]
- efi: use default_groups in kobj_type (Al Stone) [2071830]
- efi/libstub: measure loaded initrd info into the TPM (Al Stone) [2071830]
- efi/libstub: x86/mixed: increase supported argument count (Al Stone) [2071830]
- drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb (Al Stone) [2071830]
- firmware: edd: remove empty default_attrs array (Al Stone) [2071830]
- firmware: dmi-sysfs: use default_groups in kobj_type (Al Stone) [2071830]
- qemu_fw_cfg: use default_groups in kobj_type (Al Stone) [2071830]
- firmware: memmap: use default_groups in kobj_type (Al Stone) [2071830]
- firmware: arm_scmi: Add new parameter to mark_txdone (Al Stone) [2071830]
- firmware: arm_scmi: Add atomic mode support to smc transport (Al Stone) [2071830]
- firmware: arm_scmi: Add support for atomic transports (Al Stone) [2071830]
- firmware: arm_scmi: Make optee support sync_cmds_completed_on_ret (Al Stone) [2071830]
- firmware: arm_scmi: Make smc support sync_cmds_completed_on_ret (Al Stone) [2071830]
- firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag (Al Stone) [2071830]
- firmware: arm_scmi: Make smc transport use common completions (Al Stone) [2071830]
- firmware: arm_scmi: Add configurable polling mode for transports (Al Stone) [2071830]
- firmware: qemu_fw_cfg: remove sysfs entries explicitly (Al Stone) [2071830]
- firmware: qemu_fw_cfg: fix sysfs information leak (Al Stone) [2071830]
- firmware: qemu_fw_cfg: fix kobject leak in probe error path (Al Stone) [2071830]
- firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries (Al Stone) [2071830]
- firmware: arm_scmi: Use new trace event scmi_xfer_response_wait (Al Stone) [2071830]
- include: trace: Add new scmi_xfer_response_wait event (Al Stone) [2071830]
- firmware: arm_scmi: Refactor message response path (Al Stone) [2071830]
- firmware: arm_scmi: Set polling timeout to max_rx_timeout_ms (Al Stone) [2071830]
- firmware: arm_scpi: Fix string overflow in SCPI genpd driver (Al Stone) [2071830]
- firmware: arm_scmi: Perform earlier cinfo lookup call in do_xfer (Al Stone) [2071830]
- firmware: arm_scmi: optee: Drop the support for the OPTEE shared dynamic buffer (Al Stone) [2071830]
- firmware: arm_scmi: optee: Fix missing mutex_init() (Al Stone) [2071830]
- efi/libstub: consolidate initrd handling across architectures (Al Stone) [2071830]
- efi/libstub: add prototype of efi_tcg2_protocol::hash_log_extend_event() (Al Stone) [2071830]
- firmware: arm_scmi: Make virtio Version_1 compliance optional (Al Stone) [2071830]
- firmware: arm_scmi: Add optee transport (Al Stone) [2071830]
- firmware: arm_scmi: Fix type error assignment in voltage protocol (Al Stone) [2071830]
- firmware: arm_scmi: Review some virtio log messages (Al Stone) [2071830]
- firmware: arm_scmi: Fix type error in sensor protocol (Al Stone) [2071830]
- firmware: arm_scmi: pm: Propagate return value to caller (Al Stone) [2071830]
- firmware: arm_scmi: Fix base agent discover response (Al Stone) [2071830]
- firmware: arm_scmi: Fix null de-reference on error path (Al Stone) [2071830]
- exit/kthread: Have kernel threads return instead of calling do_exit (Al Stone) [2071830]
- firmware/psci: fix application of sizeof to pointer (Al Stone) [2071830]
- firmware: arm_ffa: Remove unused 'compat_version' variable (Al Stone) [2071830]
- firmware: arm_ffa: Add support for MEM_LEND (Al Stone) [2071830]
- firmware: arm_ffa: Handle compatibility with different firmware versions (Al Stone) [2071830]
- firmware: arm_scmi: Add proper barriers to scmi virtio device (Al Stone) [2071830]
- firmware: arm_scmi: Simplify spinlocks in virtio transport (Al Stone) [2071830]
- efi/cper: use stack buffer for error record decoding (Al Stone) [2071830]
- efi/libstub: Simplify "Exiting bootservices" message (Al Stone) [2071830]
- firmware: arm_ffa: Fix __ffa_devices_unregister (Al Stone) [2071830]
- firmware: arm_ffa: Add missing remove callback to ffa_bus_type (Al Stone) [2071830]
- firmware: arm_scmi: Remove __exit annotation (Al Stone) [2071830]
- firmware: arm_scmi: Fix virtio transport Kconfig dependency (Al Stone) [2071830]
- firmware: dmi: Move product_sku info to the end of the modalias (Al Stone) [2071830]
- efi: cper: check section header more appropriately (Al Stone) [2071830]
- efi: cper: fix scnprintf() use in cper_mem_err_location() (Al Stone) [2071830]
- rhel: Enable Simple FrameBuffer support (Al Stone) [2071830]
- rhel: Enable ARM SCMI transport mechanism (Al Stone) [2071830]
- firmware: arm_scmi: Use WARN_ON() to check configured transports (Al Stone) [2071830]
- firmware: arm_scmi: Fix boolconv.cocci warnings (Al Stone) [2071830]
- firmware: smccc: Register smccc_trng platform device (Al Stone) [2071830]
- firmware: arm_scmi: Free mailbox channels if probe fails (Al Stone) [2071830]
- firmware: arm_scmi: Add virtio transport (Al Stone) [2071830]
- firmware: arm_scmi: Add priv parameter to scmi_rx_callback (Al Stone) [2071830]
- firmware: arm_scmi: Add optional link_supplier() transport op (Al Stone) [2071830]
- firmware: arm_scmi: Add message passing abstractions for transports (Al Stone) [2071830]
- firmware: arm_scmi: Add method to override max message number (Al Stone) [2071830]
- firmware: arm_scmi: Make shmem support optional for transports (Al Stone) [2071830]
- firmware: arm_scmi: Make SCMI transports configurable (Al Stone) [2071830]
- firmware: arm_scmi: Make polling mode optional (Al Stone) [2071830]
- firmware: arm_scmi: Make .clear_channel optional (Al Stone) [2071830]
- firmware: arm_scmi: Handle concurrent and out-of-order messages (Al Stone) [2071830]
- firmware: arm_scmi: Introduce monotonically increasing tokens (Al Stone) [2071830]
- firmware: arm_scmi: Add optional transport_init/exit support (Al Stone) [2071830]
- firmware: arm_scmi: Remove scmi_dump_header_dbg() helper (Al Stone) [2071830]
- firmware: arm_scmi: Add support for type handling in common functions (Al Stone) [2071830]
- efi: sysfb_efi: fix build when EFI is not set (Al Stone) [2071830]
- drivers/firmware: fix SYSFB depends to prevent build failures (Al Stone) [2071830]
- drivers: firmware: Add PDI load API support (Al Stone) [2071830]
- drivers/firmware: consolidate EFI framebuffer setup for all arches (Al Stone) [2071830]
- drivers/firmware: move x86 Generic System Framebuffers support (Al Stone) [2071830]
- bus: Make remove callback return void (Al Stone) [2071830]
- s390/ccwgroup: Drop if with an always false condition (Al Stone) [2071830]
- PCI: endpoint: Make struct pci_epf_driver::remove return void (Al Stone) [2071830]
- s390/scm: Make struct scm_driver::remove return void (Al Stone) [2071830]
- s390/cio: Make struct css_driver::remove return void (Al Stone) [2071830]
- redhat: Bump RHEL_MINOR for 9.2 (Frantisek Hrbata)
- redhat: add missing CVE reference to latest changelog entries (Patrick Talbert)
Resolves: rhbz#2120362, rhbz#2060827, rhbz#2071835, rhbz#2101713, rhbz#2119809, rhbz#2040036, rhbz#2071830

Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
2022-09-08 06:37:47 -04:00

68 lines
2.3 KiB
Makefile

RHEL_MAJOR = 9
RHEL_MINOR = 2
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 163
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif