0f9ed417bd
* Mon May 26 2025 Jan Stancek <jstancek@redhat.com> [5.14.0-588.el9]
- scsi: mpt3sas: Fix buffer overflow in mpt3sas_send_mctp_passthru_req() (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Mark device strings as nonstring (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Fix spelling mistake "receveid" -> "received" (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: update driver version to 52.100.00.00 (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Send a diag reset if target reset fails (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Report driver capability as part of IOCINFO command (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Add support for MCTP Passthrough commands (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Update MPI headers to 02.00.62 version (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Fix a locking bug in an error path (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Reduce log level of ignore_delay_remove message to KERN_INFO (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Remove unused config functions (Chandrakanth Patil) [RHEL-81907]
- scsi: Constify struct pci_error_handlers (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Set ioc->manu_pg11.EEDPTagMode directly to 1 (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Add details to EEDPTagMode error message (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Update driver version to 51.100.00.00 (Chandrakanth Patil) [RHEL-81907]
- scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time (Chandrakanth Patil) [RHEL-81907]
- Revert "cgroup: Avoid -Wstringop-overflow warnings" (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: Move procfs cpuset attribute under cgroup-v1.c (Radostin Stoyanov) [RHEL-80382]
- Revert "selftests/cgroup: Drop define _GNU_SOURCE" (Radostin Stoyanov) [RHEL-80382]
- selftests/cgroup: Fix compile error in test_cpu.c (Radostin Stoyanov) [RHEL-80382]
- configs: enable CPUSETS_V1 on RHEL (Radostin Stoyanov) [RHEL-80382]
- mm: memcg: move soft limit reclaim code to memcontrol-v1.c (Radostin Stoyanov) [RHEL-80382]
- mm: memcg: introduce memcontrol-v1.c (Radostin Stoyanov) [RHEL-80382]
- mm: remove page_cpupid_xchg_last() (Radostin Stoyanov) [RHEL-80382]
- mm: use folio_xchg_last_cpupid() in wp_page_reuse() (Radostin Stoyanov) [RHEL-80382]
- mm: convert wp_page_reuse() and finish_mkwrite_fault() to take a folio (Radostin Stoyanov) [RHEL-80382]
- mm: make finish_mkwrite_fault() static (Radostin Stoyanov) [RHEL-80382]
- mm: huge_memory: use folio_xchg_last_cpupid() in __split_huge_page_tail() (Radostin Stoyanov) [RHEL-80382]
- mm: migrate: use folio_xchg_last_cpupid() in folio_migrate_flags() (Radostin Stoyanov) [RHEL-80382]
- sched/fair: use folio_xchg_last_cpupid() in should_numa_migrate_memory() (Radostin Stoyanov) [RHEL-80382]
- mm: add folio_xchg_last_cpupid() (Radostin Stoyanov) [RHEL-80382]
- mm: remove xchg_page_access_time() (Radostin Stoyanov) [RHEL-80382]
- mm: huge_memory: use a folio in change_huge_pmd() (Radostin Stoyanov) [RHEL-80382]
- mm: mprotect: use a folio in change_pte_range() (Radostin Stoyanov) [RHEL-80382]
- sched/fair: use folio_xchg_access_time() in numa_hint_fault_latency() (Radostin Stoyanov) [RHEL-80382]
- mm: add folio_xchg_access_time() (Radostin Stoyanov) [RHEL-80382]
- mm: remove page_cpupid_last() (Radostin Stoyanov) [RHEL-80382]
- mm: huge_memory: use folio_last_cpupid() in __split_huge_page_tail() (Radostin Stoyanov) [RHEL-80382]
- mm: memory: use folio_last_cpupid() in do_numa_page() (Radostin Stoyanov) [RHEL-80382]
- mm: add folio_last_cpupid() (Radostin Stoyanov) [RHEL-80382]
- mm: huge_memory: use folio_last_cpupid() in do_huge_pmd_numa_page() (Radostin Stoyanov) [RHEL-80382]
- mm_types: add virtual and _last_cpupid into struct folio (Radostin Stoyanov) [RHEL-80382]
- Documentation/cgroup-v2: clarify that zswap.writeback is ignored if zswap is disabled (Radostin Stoyanov) [RHEL-80382]
- selftests: test_zswap: add test for hierarchical zswap.writeback (Radostin Stoyanov) [RHEL-80382]
- selftests: cgroup: add tests to verify the zswap writeback path (Radostin Stoyanov) [RHEL-80382]
- selftests: fix the zswap invasive shrink test (Radostin Stoyanov) [RHEL-80382]
- selftests: add zswapin and no zswap tests (Radostin Stoyanov) [RHEL-80382]
- selftests: cgroup: update per-memcg zswap writeback selftest (Radostin Stoyanov) [RHEL-80382]
- selftests: add a sanity check for zswap (Radostin Stoyanov) [RHEL-80382]
- cgroup/rstat: Selftests for niced CPU statistics (Radostin Stoyanov) [RHEL-80382]
- cgroup/rstat: Tracking cgroup-level niced CPU time (Radostin Stoyanov) [RHEL-80382]
- selftests/cgroup: Drop define _GNU_SOURCE (Radostin Stoyanov) [RHEL-80382]
- selftests: cgroup: remove redundant enabling of memory controller (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: Move cpu.h include to cpuset-internal.h (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: add sefltest for cpuset v1 (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: guard cpuset-v1 code under CONFIG_CPUSETS_V1 (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: rename functions shared between v1 and v2 (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move v1 interfaces to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move validate_change_legacy to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move legacy hotplug update to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: add callback_lock helper (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move memory_spread to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move relax_domain_level to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move memory_pressure to cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: move common code to cpuset-internal.h (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: introduce cpuset-v1.c (Radostin Stoyanov) [RHEL-80382]
- cgroup: Avoid -Wstringop-overflow warnings (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: add decrease attach_in_progress helpers (Radostin Stoyanov) [RHEL-80382]
- cgroup/pids: Remove unreachable paths of pids_{can,cancel}_fork (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: Expose cpuset filesystem with cpuset v1 only (Radostin Stoyanov) [RHEL-80382]
- cgroup: Do not report unavailable v1 controllers in /proc/cgroups (Radostin Stoyanov) [RHEL-80382]
- cgroup: Disallow mounting v1 hierarchies without controller implementation (Radostin Stoyanov) [RHEL-80382]
- cgroup: Fix potential overflow issue when checking max_depth (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: Check for partition roots with overlapping CPUs (Radostin Stoyanov) [RHEL-80382]
- cgroup: clarify css sibling linkage is protected by cgroup_mutex or RCU (Radostin Stoyanov) [RHEL-80382]
- cgroup/cpuset: Remove cpuset_slab_spread_rotor (Radostin Stoyanov) [RHEL-80382]
- cgroup: update some statememt about delegation (Radostin Stoyanov) [RHEL-80382]
- redhat: configs: Enable CX231XX driver (Kate Hsuan) [RHEL-86821]
- media: usb: usbtv: Stop direct calls to queue num_buffers field (Kate Hsuan) [RHEL-86821]
- media: saa6752hs: Don't set format in sub-device state (Kate Hsuan) [RHEL-86821]
- media: i2c: Use accessors for pad config 'try_*' fields (Kate Hsuan) [RHEL-86821]
- redhat: add downstream SBAT for UKI addons (Emanuele Giuseppe Esposito) [RHEL-92594]
- uki_addons: provide custom SBAT as input parameter (Emanuele Giuseppe Esposito) [RHEL-92594]
- uki_addons: remove completely sbat/sbat.conf (Emanuele Giuseppe Esposito) [RHEL-92594]
- fbdev: efifb: Change the return value type to void (Jocelyn Falempe) [RHEL-75953]
- fbcon: Fix a NULL pointer dereference issue in fbcon_putcs (Jocelyn Falempe) [RHEL-75953]
- fbdev: efifb: Use devm_register_framebuffer() (Jocelyn Falempe) [RHEL-75953]
- fbdev: Introduce devm_register_framebuffer() (Jocelyn Falempe) [RHEL-75953]
- video: Handle HAS_IOPORT dependencies (Jocelyn Falempe) [RHEL-75953]
- fbcon: Use oops_in_progress instead of panic_cpu (Jocelyn Falempe) [RHEL-75953]
- fbcon: Add an option to disable fbcon in panic (Jocelyn Falempe) [RHEL-75953]
- mm: gup: fix infinite loop within __get_longterm_locked (Waiman Long) [RHEL-89519]
- udmabuf: fix racy memfd sealing check (Waiman Long) [RHEL-89519]
- udmabuf: udmabuf_create pin folio codestyle cleanup (Waiman Long) [RHEL-89519]
- udmabuf: pre-fault when first page fault (Waiman Long) [RHEL-89519]
- selftests/udmabuf: add tests to verify data after page migration (Waiman Long) [RHEL-89519]
- udmabuf: pin the pages using memfd_pin_folios() API (Waiman Long) [RHEL-89519]
- docs: hugetlbpage.rst: add hugetlb migration description (Waiman Long) [RHEL-89519]
- mm: hugetlb: make the hugetlb migration strategy consistent (Waiman Long) [RHEL-89519]
- mm: record the migration reason for struct migration_target_control (Waiman Long) [RHEL-89519]
- selftests: drivers/dma-buf: Improve message in selftest summary (Waiman Long) [RHEL-89519]
- selftests: drivers/dma-buf: Fix implicit declaration warns (Waiman Long) [RHEL-89519]
Resolves: RHEL-75953, RHEL-80382, RHEL-81907, RHEL-86821, RHEL-89519, RHEL-92594
Signed-off-by: Jan Stancek <jstancek@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 7
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 588
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|