kernel-5.14.0-428.el9

* Wed Mar 06 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-428.el9]
- x86/fpu: Stop relying on userspace for info to fault in xsave buffer (Steve Best) [RHEL-26672] {CVE-2024-26603}
- redhat: configs: Enable CONFIG_MEMTEST to enable memory test (Eric Chanudet) [RHEL-24906]
- x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully (David Arcari) [RHEL-19514]
- x86/apic: Fake primary thread mask for XEN/PV (David Arcari) [RHEL-19514]
- cpu/hotplug: Remove dependancy against cpu_primary_thread_mask (David Arcari) [RHEL-19514]
- x86/smpboot: Fix the parallel bringup decision (David Arcari) [RHEL-19514]
- x86/realmode: Make stack lock work in trampoline_compat() (David Arcari) [RHEL-19514]
- x86/smp: Initialize cpu_primary_thread_mask late (David Arcari) [RHEL-19514]
- cpu/hotplug: Fix off by one in cpuhp_bringup_mask() (David Arcari) [RHEL-19514]
- x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils (David Arcari) [RHEL-19514]
- x86/tsc: Defer marking TSC unstable to a worker (David Arcari) [RHEL-19514]
- cpu/hotplug: Remove unused function declaration cpu_set_state_online() (David Arcari) [RHEL-19514]
- x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it (David Arcari) [RHEL-19514]
- x86/smpboot: Support parallel startup of secondary CPUs (David Arcari) [RHEL-19514]
- x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel (David Arcari) [RHEL-19514]
- x86/smpboot: Remove initial_gs (David Arcari) [RHEL-19514]
- x86/smpboot: Remove early_gdt_descr on 64-bit (David Arcari) [RHEL-19514]
- x86/smpboot: Implement a bit spinlock to protect the realmode stack (David Arcari) [RHEL-19514]
- x86/apic: Save the APIC virtual base address (David Arcari) [RHEL-19514]
- x86/smpboot: Remove initial_stack on 64-bit (David Arcari) [RHEL-19514]
- cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE (David Arcari) [RHEL-19514]
- x86/apic: Provide cpu_primary_thread mask (David Arcari) [RHEL-19514]
- x86/smpboot: Enable split CPU startup (David Arcari) [RHEL-19514]
- cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism (David Arcari) [RHEL-19514]
- cpu/hotplug: Remove unused state functions (David Arcari) [RHEL-19514]
- riscv: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514]
- MIPS: SMP_CPS: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514]
- arm64: smp: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514]
- ARM: smp: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514]
- cpu/hotplug: Remove cpu_report_state() and related unused cruft (David Arcari) [RHEL-19514]
- cpu/hotplug: Add debug printks for hotplug callback failures (David Arcari) [RHEL-19514]
- cpu/hotplug: Do not bail-out in DYING/STARTING sections (David Arcari) [RHEL-19514]
- cpu/hotplug: Initialise all cpuhp_cpu_state structs earlier (David Arcari) [RHEL-19514]
- x86/smpboot: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514]
- cpu/hotplug: Add CPU state tracking and synchronization (David Arcari) [RHEL-19514]
- x86/xen/hvm: Get rid of DEAD_FROZEN handling (David Arcari) [RHEL-19514]
- x86/xen/smp_pv: Remove wait for CPU online (David Arcari) [RHEL-19514]
- x86/smpboot: Remove wait for cpu_online() (David Arcari) [RHEL-19514]
- cpu/hotplug: Rework sparse_irq locking in bringup_cpu() (David Arcari) [RHEL-19514]
- x86/smpboot: Remove cpu_callin_mask (David Arcari) [RHEL-19514]
- x86/smpboot: Make TSC synchronization function call based (David Arcari) [RHEL-19514]
- x86/smpboot: Move synchronization masks to SMP boot code (David Arcari) [RHEL-19514]
- x86/cpu/cacheinfo: Remove cpu_callout_mask dependency (David Arcari) [RHEL-19514]
- gitlab-ci: enable arm64/s390x/ppc64le debug builds (Michael Hofmann)
- PCI/ASPM: Fix deadlock when enabling ASPM (Myron Stowe) [RHEL-26162]
- MAINTAINERS: Orphan Cadence PCIe IP (Myron Stowe) [RHEL-26162]
- Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()" (Myron Stowe) [RHEL-26162]
- Revert "PCI: acpiphp: Reassign resources on bridge if necessary" (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter (Myron Stowe) [RHEL-26162]
- PCI: qcom: Clean up ASPM comment (Myron Stowe) [RHEL-26162]
- PCI: qcom: Fix potential deadlock when enabling ASPM (Myron Stowe) [RHEL-26162]
- PCI: vmd: Fix potential deadlock when enabling ASPM (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Add pci_enable_link_state_locked() (Myron Stowe) [RHEL-26162]
- PCI: loongson: Limit MRRS to 256 (Myron Stowe) [RHEL-26162]
- PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() (Myron Stowe) [RHEL-26162]
- PCI: endpoint: Fix double free in __pci_epc_create() (Myron Stowe) [RHEL-26162]
- PCI: Replace unnecessary UTF-8 in Kconfig (Myron Stowe) [RHEL-26162]
- logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations (Myron Stowe) [RHEL-26162]
- PCI: Make pci_assign_unassigned_resources() non-init (Myron Stowe) [RHEL-26162]
- PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device (Myron Stowe) [RHEL-26162]
- PCI/portdrv: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/VC: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/PTM: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/PME: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/ATS: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/ATS: Show PASID Capability register width in bitmasks (Myron Stowe) [RHEL-26162]
- PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk (Myron Stowe) [RHEL-26162]
- PCI: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI/MSI: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162]
- PCI/DPC: Use defines with DPC reason fields (Myron Stowe) [RHEL-26162]
- PCI/DPC: Use defined fields with DPC_CTL register (Myron Stowe) [RHEL-26162]
- PCI/DPC: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI: hotplug: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162]
- PCI: dwc: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162]
- PCI: cadence: Use FIELD_GET() (Myron Stowe) [RHEL-26162]
- PCI: Use FIELD_GET() to extract Link Width (Myron Stowe) [RHEL-26162]
- PCI: mvebu: Use FIELD_PREP() with Link Width (Myron Stowe) [RHEL-26162]
- PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields (Myron Stowe) [RHEL-26162]
- scsi: ipr: Do PCI error checks on own line (Myron Stowe) [RHEL-26162]
- PCI: xgene: Do PCI error check on own line & keep return value (Myron Stowe) [RHEL-26162]
- PCI: Do error check on own line to split long "if" conditions (Myron Stowe) [RHEL-26162]
- atm: iphase: Do PCI error checks on own line (Myron Stowe) [RHEL-26162]
- sh: pci: Do PCI error check on own line (Myron Stowe) [RHEL-26162]
- alpha: Streamline convoluted PCI error handling (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge (Myron Stowe) [RHEL-26162]
- PCI: xilinx-cpm: Move IRQ definitions to a common header (Myron Stowe) [RHEL-26162]
- PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses (Myron Stowe) [RHEL-26162]
- PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example (Myron Stowe) [RHEL-26162]
- PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: xilinx-nwl: Convert to YAML schemas of Xilinx NWL PCIe Root Port Bridge (Myron Stowe) [RHEL-26162]
- PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed (Myron Stowe) [RHEL-26162]
- PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed (Myron Stowe) [RHEL-26162]
- PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed (Myron Stowe) [RHEL-26162]
- misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller (Myron Stowe) [RHEL-26162]
- MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 (Myron Stowe) [RHEL-26162]
- PCI: rcar-gen4: Add endpoint mode support (Myron Stowe) [RHEL-26162]
- PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host (Myron Stowe) [RHEL-26162]
- dt-bindings: PCI: dwc: Update maxItems of reg and reg-names (Myron Stowe) [RHEL-26162]
- PCI: dwc: endpoint: Introduce .pre_init() and .deinit() (Myron Stowe) [RHEL-26162]
- PCI: dwc: Expose dw_pcie_write_dbi2() to module (Myron Stowe) [RHEL-26162]
- PCI: dwc: Expose dw_pcie_ep_exit() to module (Myron Stowe) [RHEL-26162]
- PCI: dwc: Add EDMA_UNROLL capability flag (Myron Stowe) [RHEL-26162]
- PCI: dwc: endpoint: Add multiple PFs support for dbi2 (Myron Stowe) [RHEL-26162]
- PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting (Myron Stowe) [RHEL-26162]
- PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling (Myron Stowe) [RHEL-26162]
- PCI: dwc: Add dw_pcie_link_set_max_link_width() (Myron Stowe) [RHEL-26162]
- PCI: Add T_PVPERL macro (Myron Stowe) [RHEL-26162]
- PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers (Myron Stowe) [RHEL-26162]
- PCI: layerscape-ep: Set 64-bit DMA mask (Myron Stowe) [RHEL-26162]
- PCI: cadence: Drop unused member from struct cdns_plat_pcie (Myron Stowe) [RHEL-26162]
- PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops (Myron Stowe) [RHEL-26162]
- PCI: dwc: Add host_post_init() callback (Myron Stowe) [RHEL-26162]
- drm/qxl: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162]
- drm/virtio: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162]
- PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga() (Myron Stowe) [RHEL-26162]
- PCI/VGA: Select VGA devices earlier (Myron Stowe) [RHEL-26162]
- PCI/VGA: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162]
- PCI: Add pci_is_vga() helper (Myron Stowe) [RHEL-26162]
- PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card (Myron Stowe) [RHEL-26162]
- x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 (Myron Stowe) [RHEL-26162]
- PCI/sysfs: Protect driver's D3cold preference from user space (Myron Stowe) [RHEL-26162]
- PCI/P2PDMA: Remove redundant goto (Myron Stowe) [RHEL-26162]
- PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap (Myron Stowe) [RHEL-26162]
- PCI: acpiphp: Allow built-in drivers for Attention Indicators (Myron Stowe) [RHEL-26162]
- PCI: keystone: Don't discard .probe() callback (Myron Stowe) [RHEL-26162]
- PCI: keystone: Don't discard .remove() callback (Myron Stowe) [RHEL-26162]
- PCI: kirin: Don't discard .remove() callback (Myron Stowe) [RHEL-26162]
- PCI: exynos: Don't discard .remove() callback (Myron Stowe) [RHEL-26162]
- PCI/ACPI: Use acpi_evaluate_dsm_typed() (Myron Stowe) [RHEL-26162]
- drm/radeon: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162]
- drm/amdgpu: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162]
- drm/nouveau: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162]
- ALSA: hda: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162]
- PCI: Add pci_get_base_class() helper (Myron Stowe) [RHEL-26162]
- PCI: endpoint: Use IS_ERR_OR_NULL() helper function (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() (Myron Stowe) [RHEL-26162]
- Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1" (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Convert printk() to pr_*() and add include (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Remove unnecessary includes (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Use FIELD_MAX() instead of literals (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Use time constants (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Return U32_MAX instead of bit magic construct (Myron Stowe) [RHEL-26162]
- PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields (Myron Stowe) [RHEL-26162]
- PCI: Add PCI_L1SS_CTL2 fields (Myron Stowe) [RHEL-26162]
- PCI/AER: Factor out interrupt toggling into helpers (Myron Stowe) [RHEL-26162]
- pinctrl: intel: use the correct _PM_OPS() export macro (David Arcari) [RHEL-26354]
- pinctrl: don't put the reference to GPIO device in pinctrl_pins_show() (David Arcari) [RHEL-26354]
- PM: Provide EXPORT_NS_GPL_DEV_SLEEP_PM_OPS (David Arcari) [RHEL-26354]
- pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support (David Arcari) [RHEL-26354]
- pinctrl: core: Remove unused members from struct group_desc (David Arcari) [RHEL-26354]
- pinctrl: imx: Convert to use grp member (David Arcari) [RHEL-26354]
- pinctrl: imx: Use temporary variable to hold pins (David Arcari) [RHEL-26354]
- pinctrl: freescale: remove generic pin config core support (David Arcari) [RHEL-26354]
- pinctrl: core: Embed struct pingroup into struct group_desc (David Arcari) [RHEL-26354]
- pinctrl: core: Add a convenient define PINCTRL_GROUP_DESC() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: use gpiochip_dup_line_label() (David Arcari) [RHEL-26354]
- gpiolib: provide gpiochip_dup_line_label() (David Arcari) [RHEL-26354]
- pinctrl: core: Make pins const unsigned int pointer in struct group_desc (David Arcari) [RHEL-26354]
- pinctrl: Convert unsigned to unsigned int (David Arcari) [RHEL-26354]
- pinctrl: don't include GPIOLIB private header (David Arcari) [RHEL-26354]
- pinctrl: stop using gpiod_to_chip() (David Arcari) [RHEL-26354]
- gpiolib: add gpio_device_get_label() stub for !GPIOLIB (David Arcari) [RHEL-26354]
- gpiolib: add gpio_device_get_base() stub for !GPIOLIB (David Arcari) [RHEL-26354]
- gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB (David Arcari) [RHEL-26354]
- gpiolib: Fix scope-based gpio_device refcounting (David Arcari) [RHEL-26354]
- gpiolib: provide gpio_device_get_label() (David Arcari) [RHEL-26354]
- gpiolib: provide gpio_device_get_base() (David Arcari) [RHEL-26354]
- gpiolib: provide gpiod_to_gpio_device() (David Arcari) [RHEL-26354]
- gpiolib: add support for scope-based management to gpio_device (David Arcari) [RHEL-26354]
- gpiolib: make gpio_device_get() and gpio_device_put() public (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Simplify code with cleanup helpers (David Arcari) [RHEL-26354]
- pinctrl: Bulk conversion to generic_handle_domain_irq() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Move default strength assignment to a switch-case (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Factor out byt_gpio_force_input_mode() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Fix types of config value in byt_pin_config_set() (David Arcari) [RHEL-26354]
- pinctrl: avoid reload of p state in list iteration (David Arcari) [RHEL-26354]
- pinctrl: intel: Add a generic Intel pin control platform driver (David Arcari) [RHEL-26354]
- devres: Provide krealloc_array (David Arcari) [RHEL-26354]
- redhat/configs: enable new intel pinctrl configs (David Arcari) [RHEL-26354]
- pinctrl: intel: Revert "Unexport intel_pinctrl_probe()" (David Arcari) [RHEL-26354]
- pinctrl: intel: allow independent COMPILE_TEST (David Arcari) [RHEL-26354]
- pinctrl: intel: Refactor intel_pinctrl_get_soc_data() (David Arcari) [RHEL-26354]
- pinctrl: intel: Move default strength assignment to a switch-case (David Arcari) [RHEL-26354]
- pinctrl: intel: Make PM ops functions static (David Arcari) [RHEL-26354]
- pinctrl: tigerlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: sunrisepoint: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: meteorlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: lewisburg: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: lakefield: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: jasperlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: icelake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: geminilake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: emmitsburg: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: elkhartlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: denverton: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: cedarfork: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: cannonlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: broxton: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: alderlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354]
- pinctrl: intel: Provide Intel pin control wide PM ops structure (David Arcari) [RHEL-26354]
- Remove custom EXPORT_NS_GPL_DEV_PM_OPS macro (David Arcari) [RHEL-26354]
- PM: Improve EXPORT_*_DEV_PM_OPS macros (David Arcari) [RHEL-26354]
- export: fix string handling of namespace in EXPORT_SYMBOL_NS (David Arcari) [RHEL-26354]
- PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv (David Arcari) [RHEL-26354]
- pinctrl: change the signature of pinctrl_ready_for_gpio_range() (David Arcari) [RHEL-26354]
- pinctrl: change the signature of gpio_to_pin() (David Arcari) [RHEL-26354]
- pinctrl: change the signature of pinctrl_match_gpio_range() (David Arcari) [RHEL-26354]
- pinctrl: change the signature of pinctrl_get_device_gpio_range() (David Arcari) [RHEL-26354]
- pinctrl: change the signature of pinctrl_gpio_direction() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_set_config_new() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_direction_output_new() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_direction_input_new() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_free_new() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_request_new() (David Arcari) [RHEL-26354]
- treewide: rename pinctrl_gpio_can_use_line_new() (David Arcari) [RHEL-26354]
- gpio: cdev: use pinctrl_gpio_can_use_line_new() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_set_config() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_direction_output() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_direction_input() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_free() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_request() (David Arcari) [RHEL-26354]
- pinctrl: remove pinctrl_gpio_can_use_line() (David Arcari) [RHEL-26354]
- pinctrl: intel: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- gpio: aspeed: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config() (David Arcari) [RHEL-26354]
- gpio: vf610: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- pinctrl: bcm: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- gpio: tegra: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- gpiolib: generic: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354]
- pinctrl: provide new GPIO-to-pinctrl glue helpers (David Arcari) [RHEL-26354]
- pinctrl: intel: use acpi_dev_uid_match() for matching _UID (David Arcari) [RHEL-26354]
- ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID (David Arcari) [RHEL-26354]
- pinctrl: remove unneeded extern specifiers from consumer.h (David Arcari) [RHEL-26354]
- kernel.h: Move ARRAY_SIZE() to a separate header (David Arcari) [RHEL-26354]
- Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()" (David Arcari) [RHEL-26354]
- pinctrl: intel: fetch community only when we need it (David Arcari) [RHEL-26354]
- pinctrl: core: Remove unneeded {} around one line conditional body (David Arcari) [RHEL-26354]
- pinctrl: denverton: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (David Arcari) [RHEL-26354]
- pinctrl: broxton: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (David Arcari) [RHEL-26354]
- pinctrl: intel: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354]
- pinctrl: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354]
- pinctrl: baytrail: drop runtime PM support (David Arcari) [RHEL-26354]
- pinctrl: intel: refine intel_config_set_pull() function (David Arcari) [RHEL-26354]
- pinctrl: denverton: Enable platform device in the absence of ACPI enumeration (David Arcari) [RHEL-26354]
- pinctrl: intel: Simplify code with cleanup helpers (David Arcari) [RHEL-26354]
- pinctrl: avoid unsafe code pattern in find_pinctrl() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: fix debounce disable case (David Arcari) [RHEL-26354]
- pinctrl: pinmux: Remove duplicate error message in pin_request() (David Arcari) [RHEL-26354]
- pinctrl: intel: consolidate ACPI dependency (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Make use of pm_ptr() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: reuse common functions from pinctrl-intel (David Arcari) [RHEL-26354]
- pinctrl: intel: export common pinctrl functions (David Arcari) [RHEL-26354]
- pinctrl: baytrail: consolidate common mask operation (David Arcari) [RHEL-26354]
- pinctrl: pinmux: handle radix_tree_insert() errors in pinmux_generic_add_function() (David Arcari) [RHEL-26354]
- pinctrl: core: handle radix_tree_insert() errors in pinctrl_register_one_pin() (David Arcari) [RHEL-26354]
- pinctrl: core: handle radix_tree_insert() errors in pinctrl_generic_add_group() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: invert if condition (David Arcari) [RHEL-26354]
- pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure (David Arcari) [RHEL-26354]
- pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook (David Arcari) [RHEL-26354]
- pinctrl: intel: refine ->irq_set_type() hook (David Arcari) [RHEL-26354]
- pinctrl: intel: refine ->set_mux() hook (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Use str_hi_lo() helper (David Arcari) [RHEL-26354]
- pinctrl: Relax user input size in pinmux_select() (David Arcari) [RHEL-26354]
- pinctrl: Duplicate user memory in one go in pinmux_select() (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Unify style of error and debug messages (David Arcari) [RHEL-26354]
- pinctrl: baytrail: Use BIT() in BYT_PULL_ASSIGN_* definitions (David Arcari) [RHEL-26354]
- pinctrl: sunrisepoint: Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*() (David Arcari) [RHEL-26354]
- pinctrl: tigerlake: Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: lewisburg: Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354]
- pinctrl: lakefield: Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: jasperlake: Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: icelake: Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: geminilake: Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354]
- pinctrl: emmitsburg: Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: elkhartlake: Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: denverton: Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: cedarfork: Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: cannonlake: Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: broxton: Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354]
- pinctrl: alderlake: Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354]
- pinctrl: intel: Enumerate PWM device when community has a capability (David Arcari) [RHEL-26354]
- pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() (David Arcari) [RHEL-26354]
- pwm: lpss: Allow other drivers to enable PWM LPSS (David Arcari) [RHEL-26354]
- pwm: lpss: Include headers we are the direct user of (David Arcari) [RHEL-26354]
- pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS (David Arcari) [RHEL-26354]
- pwm: lpss: Add a comment to the bypass field (David Arcari) [RHEL-26354]
- pwm: lpss: Move resource mapping to the glue drivers (David Arcari) [RHEL-26354]
- pwm: lpss: Deduplicate board info data structures (David Arcari) [RHEL-26354]
- pinctrl: intel: Add Intel Moorefield pin controller support (David Arcari) [RHEL-26354]
- pinctrl: sunrisepoint: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354]
- pinctrl: tigerlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354]
- pinctrl: alderlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354]
- pinctrl: cannonlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354]
- pinctrl: icelake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354]
- pinctrl: core: Use device_match_of_node() helper (David Arcari) [RHEL-26354]
- redhat/configs: intel pinctrl config cleanup (David Arcari) [RHEL-26354]
- config: wifi: enable MT7925E card (Jose Ignacio Tornos Martinez) [RHEL-14693]
- shmem: support idmapped mounts for tmpfs (Giuseppe Scrivano) [RHEL-23900]
- iommu/vt-d: Fix incorrect cache invalidation for mm notification (Jerry Snitselaar) [RHEL-26541]
- mmu_notifiers: rename invalidate_range notifier (Jerry Snitselaar) [RHEL-26541]
- mmu_notifiers: don't invalidate secondary TLBs as part of mmu_notifier_invalidate_range_end() (Jerry Snitselaar) [RHEL-26541]
- mmu_notifiers: call invalidate_range() when invalidating TLBs (Jerry Snitselaar) [RHEL-26541]
- mmu_notifiers: fixup comment in mmu_interval_read_begin() (Jerry Snitselaar) [RHEL-26541]
- mlxbf_gige: Enable the GigE port in mlxbf_gige_open (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: Fix intermittent no ip issue (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: fix receive packet race condition (Luiz Capitulino) [RHEL-21118]
- net: ethernet: mellanox: Convert to platform remove callback returning void (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: Remove two unused function declarations (Luiz Capitulino) [RHEL-21118]
- net: mellanox: mlxbf_gige: Fix skb_panic splat under memory pressure (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: fix white space in mlxbf_gige_eth_ioctl (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: add "set_link_ksettings" ethtool callback (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: support 10M/100M/1G speeds on BlueField-3 (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: add MDIO support for BlueField-3 (Luiz Capitulino) [RHEL-21118]
- net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: clear MDIO gateway lock after read (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: compute MDIO period based on i1clk (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: remove own module name define and use KBUILD_MODNAME instead (Luiz Capitulino) [RHEL-21118]
- net/mlxbf_gige: use eth_zero_addr() to clear mac address (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: remove driver-managed interrupt counts (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: increase MDIO polling rate to 5us (Luiz Capitulino) [RHEL-21118]
- net: mellanox: mlxbf_gige: Replace non-standard interrupt handling (Luiz Capitulino) [RHEL-21118]
- mlxbf_gige: clear valid_polarity upon open (Luiz Capitulino) [RHEL-21118]
- net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() (Luiz Capitulino) [RHEL-21118]
- redhat: update self-test data (Scott Weaver)
- redhat: enable zstream release numbering for RHEL 9.4 (Scott Weaver)
- redhat: set default dist suffix for RHEL 9.4 (Scott Weaver)
- redhat: fix changelog copying (Jan Stancek)
- Bump RHEL_MINOR for 9.5 (Lucas Zampieri)
- redhat: do not compress the full kernel changelog in the src.rpm (Herton R. Krzesinski)
- redhat: ship all the changelog from source git into kernel-doc (Herton R. Krzesinski)
- redhat: create an empty changelog file when changing its name (Herton R. Krzesinski)
Resolves: RHEL-19514, RHEL-24906, RHEL-26162, RHEL-26354, RHEL-26672

Signed-off-by: Lucas Zampieri <lzampier@redhat.com>

Makefile.rhelver

@@ -1,5 +1,5 @@
 RHEL_MAJOR = 9
-RHEL_MINOR = 4
+RHEL_MINOR = 5
 
 #
 # RHEL_RELEASE
@@ -12,7 +12,7 @@ RHEL_MINOR = 4
 #
 # Use this spot to avoid future merge conflicts.
 # Do not trim this comment.
-RHEL_RELEASE = 427
+RHEL_RELEASE = 428
 
 #
 # ZSTREAM

kernel-aarch64-64k-debug-rhel.config

@@ -3217,7 +3217,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3523,7 +3523,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4366,14 +4366,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4386,10 +4380,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-aarch64-64k-rhel.config

@@ -3196,7 +3196,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3502,7 +3502,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4344,14 +4344,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4364,10 +4358,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-aarch64-debug-rhel.config

@@ -3214,7 +3214,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3520,7 +3520,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4363,14 +4363,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4383,10 +4377,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-aarch64-rhel.config

@@ -3193,7 +3193,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3499,7 +3499,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4341,14 +4341,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4361,10 +4355,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-aarch64-rt-debug-rhel.config

@@ -3272,7 +3272,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3591,7 +3591,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4443,14 +4443,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4463,10 +4457,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-aarch64-rt-rhel.config

@@ -3251,7 +3251,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3570,7 +3570,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4421,14 +4421,8 @@ CONFIG_PHY_TEGRA_XUSB=m
 CONFIG_PHY_XGENE=y
 CONFIG_PID_IN_CONTEXTIDR=y
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
 # CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL_IMX8DXL is not set
 CONFIG_PINCTRL_IMX8MM=y
 CONFIG_PINCTRL_IMX8MN=y
@@ -4441,10 +4435,7 @@ CONFIG_PINCTRL_IMX93=y
 # CONFIG_PINCTRL_IMXRT1050 is not set
 # CONFIG_PINCTRL_IMXRT1170 is not set
 CONFIG_PINCTRL_IPROC_GPIO=y
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 CONFIG_PINCTRL_MAX77620=y
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set

kernel-ppc64le-debug-rhel.config

@@ -2914,7 +2914,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3211,7 +3211,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -3973,18 +3973,9 @@ CONFIG_PHYLIB=y
 CONFIG_PHYSICAL_ALIGN=0x200000
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
@@ -6426,7 +6417,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-ppc64le-rhel.config

@@ -2894,7 +2894,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3191,7 +3191,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -3953,18 +3953,9 @@ CONFIG_PHYLIB=y
 CONFIG_PHYSICAL_ALIGN=0x200000
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
@@ -6404,7 +6395,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-debug-rhel.config

@@ -2903,7 +2903,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3198,7 +3198,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -3957,18 +3957,9 @@ CONFIG_PHY_BCM_SR_USB=m
 # CONFIG_PHY_QCOM_USB_SS is not set
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
@@ -6415,7 +6406,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-rhel.config

@@ -2883,7 +2883,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3178,7 +3178,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -3937,18 +3937,9 @@ CONFIG_PHY_BCM_SR_USB=m
 # CONFIG_PHY_QCOM_USB_SS is not set
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
@@ -6393,7 +6384,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-s390x-zfcpdump-rhel.config

@@ -2896,7 +2896,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 # CONFIG_MEMSTICK_REALTEK_USB is not set
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3191,7 +3191,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -3952,18 +3952,9 @@ CONFIG_PHY_BCM_SR_USB=m
 # CONFIG_PHY_QCOM_USB_SS is not set
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PID_NS=y
-CONFIG_PINCTRL_ALDERLAKE=m
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
 # CONFIG_PINCTRL_CS42L43 is not set
-CONFIG_PINCTRL_ELKHARTLAKE=m
-CONFIG_PINCTRL_EMMITSBURG=m
-CONFIG_PINCTRL_ICELAKE=m
 # CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_JASPERLAKE is not set
-CONFIG_PINCTRL_LAKEFIELD=m
 # CONFIG_PINCTRL_LPASS_LPI is not set
-# CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
@@ -6421,7 +6412,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 # CONFIG_WDAT_WDT is not set
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-x86_64-debug-rhel.config

@@ -3091,7 +3091,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 CONFIG_MEMSTICK_REALTEK_USB=m
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3398,7 +3398,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4196,6 +4196,7 @@ CONFIG_PINCTRL_ELKHARTLAKE=m
 CONFIG_PINCTRL_EMMITSBURG=m
 CONFIG_PINCTRL_GEMINILAKE=m
 CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_INTEL_PLATFORM=m
 CONFIG_PINCTRL_JASPERLAKE=m
 CONFIG_PINCTRL_LAKEFIELD=m
 CONFIG_PINCTRL_LEWISBURG=m
@@ -4203,6 +4204,7 @@ CONFIG_PINCTRL_LEWISBURG=m
 # CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 CONFIG_PINCTRL_METEORLAKE=m
+CONFIG_PINCTRL_METEORPOINT=m
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
 # CONFIG_PINCTRL_OCELOT is not set
@@ -6688,7 +6690,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 CONFIG_WDAT_WDT=m
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-x86_64-rhel.config

@@ -3071,7 +3071,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 CONFIG_MEMSTICK_REALTEK_USB=m
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3378,7 +3378,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4176,6 +4176,7 @@ CONFIG_PINCTRL_ELKHARTLAKE=m
 CONFIG_PINCTRL_EMMITSBURG=m
 CONFIG_PINCTRL_GEMINILAKE=m
 CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_INTEL_PLATFORM=m
 CONFIG_PINCTRL_JASPERLAKE=m
 CONFIG_PINCTRL_LAKEFIELD=m
 CONFIG_PINCTRL_LEWISBURG=m
@@ -4183,6 +4184,7 @@ CONFIG_PINCTRL_LEWISBURG=m
 # CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 CONFIG_PINCTRL_METEORLAKE=m
+CONFIG_PINCTRL_METEORPOINT=m
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
 # CONFIG_PINCTRL_OCELOT is not set
@@ -6665,7 +6667,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 CONFIG_WDAT_WDT=m
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-x86_64-rt-debug-rhel.config

@@ -3148,7 +3148,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 CONFIG_MEMSTICK_REALTEK_USB=m
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3467,7 +3467,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4275,6 +4275,7 @@ CONFIG_PINCTRL_ELKHARTLAKE=m
 CONFIG_PINCTRL_EMMITSBURG=m
 CONFIG_PINCTRL_GEMINILAKE=m
 CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_INTEL_PLATFORM=m
 CONFIG_PINCTRL_JASPERLAKE=m
 CONFIG_PINCTRL_LAKEFIELD=m
 CONFIG_PINCTRL_LEWISBURG=m
@@ -4282,6 +4283,7 @@ CONFIG_PINCTRL_LEWISBURG=m
 # CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 CONFIG_PINCTRL_METEORLAKE=m
+CONFIG_PINCTRL_METEORPOINT=m
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
 # CONFIG_PINCTRL_OCELOT is not set
@@ -6851,7 +6853,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 CONFIG_WDAT_WDT=m
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

kernel-x86_64-rt-rhel.config

@@ -3128,7 +3128,7 @@ CONFIG_MEMSTICK_REALTEK_PCI=m
 CONFIG_MEMSTICK_REALTEK_USB=m
 CONFIG_MEMSTICK_TIFM_MS=m
 # CONFIG_MEMSTICK_UNSAFE_RESUME is not set
-# CONFIG_MEMTEST is not set
+CONFIG_MEMTEST=y
 # CONFIG_MEN_A21_WDT is not set
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_MFD_88PM800 is not set
@@ -3447,7 +3447,7 @@ CONFIG_MT76x2U=m
 CONFIG_MT7921E=m
 # CONFIG_MT7921S is not set
 # CONFIG_MT7921U is not set
-# CONFIG_MT7925E is not set
+CONFIG_MT7925E=m
 # CONFIG_MT7925U is not set
 # CONFIG_MT7996E is not set
 # CONFIG_MTD_ABSENT is not set
@@ -4255,6 +4255,7 @@ CONFIG_PINCTRL_ELKHARTLAKE=m
 CONFIG_PINCTRL_EMMITSBURG=m
 CONFIG_PINCTRL_GEMINILAKE=m
 CONFIG_PINCTRL_ICELAKE=m
+CONFIG_PINCTRL_INTEL_PLATFORM=m
 CONFIG_PINCTRL_JASPERLAKE=m
 CONFIG_PINCTRL_LAKEFIELD=m
 CONFIG_PINCTRL_LEWISBURG=m
@@ -4262,6 +4263,7 @@ CONFIG_PINCTRL_LEWISBURG=m
 # CONFIG_PINCTRL_LYNXPOINT is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 CONFIG_PINCTRL_METEORLAKE=m
+CONFIG_PINCTRL_METEORPOINT=m
 # CONFIG_PINCTRL_MICROCHIP_SGPIO is not set
 # CONFIG_PINCTRL_MSM is not set
 # CONFIG_PINCTRL_OCELOT is not set
@@ -6828,7 +6830,7 @@ CONFIG_WATCH_QUEUE=y
 # CONFIG_WCN36XX is not set
 CONFIG_WDAT_WDT=m
 # CONFIG_WDTPCI is not set
-CONFIG_WERROR=y
+# CONFIG_WERROR is not set
 # CONFIG_WIL6210 is not set
 # CONFIG_WILC1000_SDIO is not set
 # CONFIG_WILC1000_SPI is not set

sources

@@ -1,3 +1,3 @@
-SHA512 (linux-5.14.0-427.el9.tar.xz) = 5eff3f2e2666d135984df42fbec99c3d108037c1f9ace33700ddcc233aa09e79d6d819da9283e81e8926c896367eb54508ec203ae8f07aed33931e21ddc73bbb
+SHA512 (linux-5.14.0-428.el9.tar.xz) = e18f5745349f024638ccf13866d0b4749b038752c152b68cb90fab45afbe25c94cc7796445d7b8daff0788e555ac6d96a69a7c43fbfa436d2f52c65c3b1b3a4e
-SHA512 (kernel-abi-stablelists-5.14.0-427.el9.tar.bz2) = fbd0732a6a744b369ebb23079003bc13023048705ecb1d04980e88b3afecfcbdc16c039dcf47c90980683f3f3ddcdbdbb6eab1512be041315d9185319ef53f3d
+SHA512 (kernel-abi-stablelists-5.14.0-428.el9.tar.bz2) = 860bdaa6ad143dfc37147141de88fda256d30f719ec86436f3e296f3d53b92a206d701913896edcad2b8edd7d074c3c03188af3fe056053b0e56418c28bde1e9
-SHA512 (kernel-kabi-dw-5.14.0-427.el9.tar.bz2) = b3c57dcc6d08bd0331ae4981425815d981619be63292657969a36515fcafe1eca9960ff4654b04048797f36bf518f53a3c40d459890b57c37750d74f30d0cc74
+SHA512 (kernel-kabi-dw-5.14.0-428.el9.tar.bz2) = 9a2e8630ed198f3dcb684903118f5f48c3536bd93f2ae7b92661c26513e7dfd5a87f5c736688dfc81eba4a2bc949319183de9b285d6ce70bb40e9bd09346b220