kernel-5.14.0-433.el9

* Mon Mar 25 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-433.el9]
- arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add common1 register space for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: disable usb lpm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am6*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add GPU device node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add verdin am62 mallow board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use OF_ALL_DTBS for combined blobs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlay for IMX219 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add AM652 dtsi file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add gpio-ranges properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Definitions for runtime pinmuxing (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Drop unused ecap0 PWM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Re-add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes (Andrew Halaney) [RHEL-25014]
- dts: ti: k3-am625-beagleplay: Add beaglecc1352 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Add nodes for more IPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DP and HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j712s2-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert NAVSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert DMSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix HDMI Audio overlay in Makefile (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add nodes for McASP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for C71x DSPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add C7x remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add MAIN R5F remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu: Add MCU R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Fix typo in ramoops reg (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add GPIO expander on I2C0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add USB Type C swap defines for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: disable MIPI DSI bridge (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add I2C I/O expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add RTC interrupt pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix indentation in watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: add iw416 based bluetooth (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Add DSI display support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for the AM62P5 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62P5 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am62x-sk: Add overlay for HDMI audio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add node for DSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: fix fss node dtbs check warnings (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix interrupt ranges for wkup & main gpio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Add cfg reg region to ringacc node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dahlia: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dev: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Set I2S_1 MCLK rate (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable AUDIO_REFCLKx (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add DSS node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fix epwm_tbclk node name to generic name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Merge the two main_conf nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Remove syscon compatible from epwm_tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable dual role support for Type-C port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: enable CAN_2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DT node for UFS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Remove power-domains from crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for SERDES MUX idle-state values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Remove Duplicated wkup_i2c0 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix compatible of ti,*-ehrpwm-tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing space before { (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Unify pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 yavia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 dahlia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix wkup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Use phandle to stdout UART node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Only set UART baud for used ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-som/common-proc-board: Add product links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Change CPTS clock parent (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable mcu network port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix mcan node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add LED controller to phyBOARD-Electra (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: j721s2/j784s4: Switch to https links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721s2: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j784s4: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Enable Type-C port for USB0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Enable I2C (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix physical address of pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing cache properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Drop aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add board detect eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Fix mmc1 pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Enable audio on SK-AM62(-LP) (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add McASP nodes (Andrew Halaney) [RHEL-25014]
- arm64: ti: dts: Add support for AM62x LP SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Refractor AM625 SK dts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-am625-beagleplay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add CPSW5G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: Introduce RTC node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add CPSW9G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for pinctrl register values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Remove firmware-name override for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-*: Add 'ti,sci-dev-id' for NAVSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Fix DDR size to full 4GB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix GPIO numbers in DT (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Rearrange entries alphabetically (Andrew Halaney) [RHEL-25014]
- arch: arm64: dts: Add support for AM69 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for M.2 variant (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add layout of OSPI flash (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix wakeup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for AM68 SK System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: Update cache properties for ti (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for phyBOARD-Electra-AM642 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J784S4 EVM board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable USB1 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable ethernet port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J784S4 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix clocks for McSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-j721e-beagleboneai64 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Fix sound node-name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add general purpose timers for am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add general purpose timers for am65 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Trim addresses to 8 digits (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Introduce operating-points table (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable McASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Rename clock-names adc_tsc_fck to fck (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable GPMC and ELM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: fix main pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62A7-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62A7 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Disable RNG node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add GPMC memory controller node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: fix RNG node clock id (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add main_cpts label (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable ramoops (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pinmux corresponding to main_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Align gpio-key node names with dtschema (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Adjust whitespace around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable HDMI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable DisplayPort (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: add DP & DP PHY (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable on board peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable WLAN connected to SDHCI0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce base support for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Drop address and size cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Fix the interrupt-parent for wkup_gpioX instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM0 to device memory map (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Remove #address-cells/#size-cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add RTI watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Move aliases to board dts (Andrew Halaney) [RHEL-25014]
- arch: arm64: ti: Add support J721S2 Common Processor Board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add support for MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add Support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add timesync router node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Correct the d-cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: correct cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J721E SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for product generation 2 boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable SR2.0-only PRUs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ICSSG nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Collate AM64 platforms together (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Relocate thermal-zones to SoC specific location (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: ti-k3*: Introduce aliases for mmc nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Cleanup "ranges" property in "pcie" DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add *max-virtual-functions* for pcie-ep DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "vendor-id"/"device-id" properties of pcie node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: Add pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ecap pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- kbuild: Cleanup DT Overlay intermediate files as appropriate (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built into .dtbo.S files (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built from .dtso named source files (Andrew Halaney) [RHEL-25014]
- tools/rtla: Exit with EXIT_SUCCESS when help is invoked (John Kacur) [RHEL-28660]
- tools/rtla: Replace setting prio with nice for SCHED_OTHER (John Kacur) [RHEL-28660]
- tools/rtla: Remove unused sched_getattr() function (John Kacur) [RHEL-28660]
- tools/rtla: Fix clang warning about mount_point var size (John Kacur) [RHEL-28660]
- tools/rtla: Fix uninitialized bucket/data->bucket_size warning (John Kacur) [RHEL-28660]
- tools/rtla: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- tools/rv: Fix curr_reactor uninitialized variable (John Kacur) [RHEL-28660]
- tools/rv: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- netfs, fscache: Prevent Oops in fscache_put_cache() (Pavel Reichl) [RHEL-28890] {CVE-2024-26612}
- bnx2fc: Remove spin_lock_bh while release resources after upload. (John Meneghini) [RHEL-9662]
- ice: fold ice_ptp_read_time into ice_ptp_gettimex64 (Michal Schmidt) [RHEL-19000]
- ice: avoid the PTP hardware semaphore in gettimex64 path (Michal Schmidt) [RHEL-19000]
- ice: add ice_adapter for shared data across PFs on the same NIC (Michal Schmidt) [RHEL-19000]
- overlay: disable EVM (Coiby Xu) [RHEL-29566]
- evm: add support to disable EVM on unsupported filesystems (Coiby Xu) [RHEL-29566]
- evm: don't copy up 'security.evm' xattr (Coiby Xu) [RHEL-29566]
- mm, vmscan: remove ISOLATE_UNMAPPED (Nico Pache) [RHEL-28667]
- trace-vmscan-postprocess: sync with tracepoints updates (Nico Pache) [RHEL-28667]
- tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate (Nico Pache) [RHEL-28667]
- mm/mglru: skip special VMAs in lru_gen_look_around() (Nico Pache) [RHEL-28667]
- mm/mglru: reclaim offlined memcgs harder (Nico Pache) [RHEL-28667]
- mm/mglru: try to stop at high watermarks (Nico Pache) [RHEL-28667]
- mm/mglru: fix underprotected page cache (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: reuse some legacy trace events (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: improve design doc (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: clean up sysfs code (Nico Pache) [RHEL-28667]
- printk: allow disabling printk per-console device kthreads at boot (Luis Claudio R. Goncalves) [RHEL-17709]
- powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV (Mamatha Inamdar) [RHEL-25055]
- IB/hfi1: Fix sdma.h tx->num_descs off-by-one error (Daniel Vacek) [RHEL-26063]
- ASoC: Intel: soc-acpi: rt713+rt1316, no sdw-dmic config (Jaroslav Kysela) [RHEL-26456]
- hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed (Maxim Levitsky) [RHEL-26435]
- hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove (Maxim Levitsky) [RHEL-26435]
- mlxsw: spectrum_acl_tcam: Fix stack corruption (Ivan Vecera) [RHEL-26463] {CVE-2024-26586}
Resolves: RHEL-17709, RHEL-19000, RHEL-25014, RHEL-25055, RHEL-28660, RHEL-28667, RHEL-28890, RHEL-29566, RHEL-9662, RHEL-28891

Signed-off-by: Scott Weaver <scweaver@redhat.com>
This commit is contained in:
Scott Weaver 2024-03-25 07:45:50 -04:00
parent dc306fe503
commit 890d3aa79a
19 changed files with 1202 additions and 23 deletions

View File

@ -12,7 +12,7 @@ RHEL_MINOR = 5
# #
# Use this spot to avoid future merge conflicts. # Use this spot to avoid future merge conflicts.
# Do not trim this comment. # Do not trim this comment.
RHEL_RELEASE = 432 RHEL_RELEASE = 433
# #
# ZSTREAM # ZSTREAM

View File

@ -7007,7 +7007,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6983,7 +6983,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -7004,7 +7004,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6980,7 +6980,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -7169,7 +7169,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -7145,7 +7145,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6417,7 +6417,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6395,7 +6395,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6406,7 +6406,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6384,7 +6384,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6412,7 +6412,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set # CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6690,7 +6690,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6667,7 +6667,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6853,7 +6853,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -6830,7 +6830,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set # CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set # CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set CONFIG_WERROR=y
# CONFIG_WIL6210 is not set # CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set # CONFIG_WILC1000_SPI is not set

View File

@ -1,3 +1,589 @@
* Mon Mar 25 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-433.el9]
- arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add common1 register space for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: disable usb lpm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am6*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add GPU device node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add verdin am62 mallow board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use OF_ALL_DTBS for combined blobs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlay for IMX219 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add AM652 dtsi file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add gpio-ranges properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Definitions for runtime pinmuxing (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Drop unused ecap0 PWM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Re-add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes (Andrew Halaney) [RHEL-25014]
- dts: ti: k3-am625-beagleplay: Add beaglecc1352 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Add nodes for more IPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DP and HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j712s2-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert NAVSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert DMSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix HDMI Audio overlay in Makefile (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add nodes for McASP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for C71x DSPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add C7x remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add MAIN R5F remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu: Add MCU R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Fix typo in ramoops reg (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add GPIO expander on I2C0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add USB Type C swap defines for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: disable MIPI DSI bridge (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add I2C I/O expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add RTC interrupt pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix indentation in watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: add iw416 based bluetooth (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Add DSI display support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for the AM62P5 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62P5 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am62x-sk: Add overlay for HDMI audio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add node for DSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: fix fss node dtbs check warnings (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix interrupt ranges for wkup & main gpio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Add cfg reg region to ringacc node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dahlia: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dev: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Set I2S_1 MCLK rate (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable AUDIO_REFCLKx (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add DSS node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fix epwm_tbclk node name to generic name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Merge the two main_conf nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Remove syscon compatible from epwm_tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable dual role support for Type-C port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: enable CAN_2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DT node for UFS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Remove power-domains from crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for SERDES MUX idle-state values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Remove Duplicated wkup_i2c0 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix compatible of ti,*-ehrpwm-tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing space before { (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Unify pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 yavia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 dahlia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix wkup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Use phandle to stdout UART node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Only set UART baud for used ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-som/common-proc-board: Add product links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Change CPTS clock parent (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable mcu network port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix mcan node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add LED controller to phyBOARD-Electra (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: j721s2/j784s4: Switch to https links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721s2: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j784s4: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Enable Type-C port for USB0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Enable I2C (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix physical address of pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing cache properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Drop aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add board detect eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Fix mmc1 pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Enable audio on SK-AM62(-LP) (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add McASP nodes (Andrew Halaney) [RHEL-25014]
- arm64: ti: dts: Add support for AM62x LP SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Refractor AM625 SK dts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-am625-beagleplay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add CPSW5G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: Introduce RTC node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add CPSW9G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for pinctrl register values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Remove firmware-name override for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-*: Add 'ti,sci-dev-id' for NAVSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Fix DDR size to full 4GB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix GPIO numbers in DT (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Rearrange entries alphabetically (Andrew Halaney) [RHEL-25014]
- arch: arm64: dts: Add support for AM69 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for M.2 variant (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add layout of OSPI flash (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix wakeup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for AM68 SK System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: Update cache properties for ti (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for phyBOARD-Electra-AM642 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J784S4 EVM board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable USB1 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable ethernet port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J784S4 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix clocks for McSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-j721e-beagleboneai64 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Fix sound node-name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add general purpose timers for am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add general purpose timers for am65 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Trim addresses to 8 digits (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Introduce operating-points table (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable McASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Rename clock-names adc_tsc_fck to fck (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable GPMC and ELM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: fix main pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62A7-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62A7 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Disable RNG node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add GPMC memory controller node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: fix RNG node clock id (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add main_cpts label (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable ramoops (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pinmux corresponding to main_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Align gpio-key node names with dtschema (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Adjust whitespace around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable HDMI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable DisplayPort (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: add DP & DP PHY (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable on board peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable WLAN connected to SDHCI0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce base support for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Drop address and size cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Fix the interrupt-parent for wkup_gpioX instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM0 to device memory map (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Remove #address-cells/#size-cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add RTI watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Move aliases to board dts (Andrew Halaney) [RHEL-25014]
- arch: arm64: ti: Add support J721S2 Common Processor Board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add support for MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add Support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add timesync router node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Correct the d-cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: correct cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J721E SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for product generation 2 boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable SR2.0-only PRUs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ICSSG nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Collate AM64 platforms together (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Relocate thermal-zones to SoC specific location (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: ti-k3*: Introduce aliases for mmc nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Cleanup "ranges" property in "pcie" DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add *max-virtual-functions* for pcie-ep DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "vendor-id"/"device-id" properties of pcie node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: Add pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ecap pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- kbuild: Cleanup DT Overlay intermediate files as appropriate (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built into .dtbo.S files (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built from .dtso named source files (Andrew Halaney) [RHEL-25014]
- tools/rtla: Exit with EXIT_SUCCESS when help is invoked (John Kacur) [RHEL-28660]
- tools/rtla: Replace setting prio with nice for SCHED_OTHER (John Kacur) [RHEL-28660]
- tools/rtla: Remove unused sched_getattr() function (John Kacur) [RHEL-28660]
- tools/rtla: Fix clang warning about mount_point var size (John Kacur) [RHEL-28660]
- tools/rtla: Fix uninitialized bucket/data->bucket_size warning (John Kacur) [RHEL-28660]
- tools/rtla: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- tools/rv: Fix curr_reactor uninitialized variable (John Kacur) [RHEL-28660]
- tools/rv: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- netfs, fscache: Prevent Oops in fscache_put_cache() (Pavel Reichl) [RHEL-28890] {CVE-2024-26612}
- bnx2fc: Remove spin_lock_bh while release resources after upload. (John Meneghini) [RHEL-9662]
- ice: fold ice_ptp_read_time into ice_ptp_gettimex64 (Michal Schmidt) [RHEL-19000]
- ice: avoid the PTP hardware semaphore in gettimex64 path (Michal Schmidt) [RHEL-19000]
- ice: add ice_adapter for shared data across PFs on the same NIC (Michal Schmidt) [RHEL-19000]
- overlay: disable EVM (Coiby Xu) [RHEL-29566]
- evm: add support to disable EVM on unsupported filesystems (Coiby Xu) [RHEL-29566]
- evm: don't copy up 'security.evm' xattr (Coiby Xu) [RHEL-29566]
- mm, vmscan: remove ISOLATE_UNMAPPED (Nico Pache) [RHEL-28667]
- trace-vmscan-postprocess: sync with tracepoints updates (Nico Pache) [RHEL-28667]
- tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate (Nico Pache) [RHEL-28667]
- mm/mglru: skip special VMAs in lru_gen_look_around() (Nico Pache) [RHEL-28667]
- mm/mglru: reclaim offlined memcgs harder (Nico Pache) [RHEL-28667]
- mm/mglru: try to stop at high watermarks (Nico Pache) [RHEL-28667]
- mm/mglru: fix underprotected page cache (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: reuse some legacy trace events (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: improve design doc (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: clean up sysfs code (Nico Pache) [RHEL-28667]
- printk: allow disabling printk per-console device kthreads at boot (Luis Claudio R. Goncalves) [RHEL-17709]
- powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV (Mamatha Inamdar) [RHEL-25055]
- IB/hfi1: Fix sdma.h tx->num_descs off-by-one error (Daniel Vacek) [RHEL-26063]
- ASoC: Intel: soc-acpi: rt713+rt1316, no sdw-dmic config (Jaroslav Kysela) [RHEL-26456]
- hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed (Maxim Levitsky) [RHEL-26435]
- hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove (Maxim Levitsky) [RHEL-26435]
- mlxsw: spectrum_acl_tcam: Fix stack corruption (Ivan Vecera) [RHEL-26463] {CVE-2024-26586}
Resolves: RHEL-17709, RHEL-19000, RHEL-25014, RHEL-25055, RHEL-28660, RHEL-28667, RHEL-28890, RHEL-29566, RHEL-9662, RHEL-28891
* Wed Mar 20 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-432.el9] * Wed Mar 20 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-432.el9]
- mm/page_alloc: don't wake kswapd from rmqueue() unless __GFP_KSWAPD_RECLAIM is specified (Waiman Long) [RHEL-24120] - mm/page_alloc: don't wake kswapd from rmqueue() unless __GFP_KSWAPD_RECLAIM is specified (Waiman Long) [RHEL-24120]
- debugobjects: Recheck debug_objects_enabled before reporting (Waiman Long) [RHEL-24120] - debugobjects: Recheck debug_objects_enabled before reporting (Waiman Long) [RHEL-24120]
@ -708,6 +1294,14 @@ Resolves: RHEL-20254, RHEL-26081, RHEL-26616
- redhat: create an empty changelog file when changing its name (Herton R. Krzesinski) - redhat: create an empty changelog file when changing its name (Herton R. Krzesinski)
Resolves: RHEL-19514, RHEL-24906, RHEL-26162, RHEL-26354, RHEL-26672 Resolves: RHEL-19514, RHEL-24906, RHEL-26162, RHEL-26354, RHEL-26672
* Thu Mar 21 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-427.6.1.el9_4]
- IB/hfi1: Fix sdma.h tx->num_descs off-by-one error (Daniel Vacek) [RHEL-26063]
- ASoC: Intel: soc-acpi: rt713+rt1316, no sdw-dmic config (Jaroslav Kysela) [RHEL-26456]
- hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed (Maxim Levitsky) [RHEL-26435]
- hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove (Maxim Levitsky) [RHEL-26435]
- mlxsw: spectrum_acl_tcam: Fix stack corruption (Ivan Vecera) [RHEL-26463 RHEL-26465] {CVE-2024-26586}
Resolves: RHEL-26063, RHEL-26435, RHEL-26456, RHEL-26463, RHEL-26465
* Tue Mar 19 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-427.5.1.el9_4] * Tue Mar 19 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-427.5.1.el9_4]
- i2c: i801: Fix block process call transactions (David Arcari) [RHEL-26479 RHEL-26481] {CVE-2024-26593} - i2c: i801: Fix block process call transactions (David Arcari) [RHEL-26479 RHEL-26481] {CVE-2024-26593}
- sched/membarrier: reduce the ability to hammer on sys_membarrier (Wander Lairson Costa) [RHEL-23428 RHEL-23429] {CVE-2024-26602} - sched/membarrier: reduce the ability to hammer on sys_membarrier (Wander Lairson Costa) [RHEL-23428 RHEL-23429] {CVE-2024-26602}

View File

@ -165,15 +165,15 @@ Summary: The Linux kernel
# define buildid .local # define buildid .local
%define specversion 5.14.0 %define specversion 5.14.0
%define patchversion 5.14 %define patchversion 5.14
%define pkgrelease 432 %define pkgrelease 433
%define kversion 5 %define kversion 5
%define tarfile_release 5.14.0-432.el9 %define tarfile_release 5.14.0-433.el9
# This is needed to do merge window version magic # This is needed to do merge window version magic
%define patchlevel 14 %define patchlevel 14
# This allows pkg_release to have configurable %%{?dist} tag # This allows pkg_release to have configurable %%{?dist} tag
%define specrelease 432%{?buildid}%{?dist} %define specrelease 433%{?buildid}%{?dist}
# This defines the kabi tarball version # This defines the kabi tarball version
%define kabiversion 5.14.0-432.el9 %define kabiversion 5.14.0-433.el9
# #
# End of genspec.sh variables # End of genspec.sh variables
@ -3733,6 +3733,591 @@ fi
# #
# #
%changelog %changelog
* Mon Mar 25 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-433.el9]
- arm64: dts: ti: k3-j721e-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: fix PMIC interrupt number (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Enable CPSW MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p-mcu/wakeup: Disable MCU and wakeup R5FSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: remove assigned-clock-parents for unused VP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add common1 register space for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Fix dtbs_install for Rocktech OLDI overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix power domain for VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: disable usb lpm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am6*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7*: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add additional regs for DMA components (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add GPU device node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-evm: Add overlay for PCIE0 Endpoint Mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add TPS6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add verdin am62 mallow board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Improve spi1 chip-select pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Remove HDMI Reset Line Name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Lower I2C1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add R5F DMA Region and Mailboxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use OF_ALL_DTBS for combined blobs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlay for IMX219 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk: Enable camera peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add overlays for OV5640 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable CSI2-RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add AM652 dtsi file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Use UART name in pinmux name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add gpio-ranges properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: Enable Verdin UART2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add full compatible to dss-oldi-io-ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add chipid node to wkup_conf bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add interrupt support for IO Expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add alias for MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add icssg-prueth nodes for PG2 devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Refactor the m.2 and minipcie power pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Definitions for runtime pinmuxing (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Drop unused ecap0 PWM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Re-add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Mark mcu gpio and mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Mark mcu_gpio_intr as reserved (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Fix typo in epwm_tbclk node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Fix GPIO pin count in DT nodes (Andrew Halaney) [RHEL-25014]
- dts: ti: k3-am625-beagleplay: Add beaglecc1352 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62p: Add nodes for more IPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DP and HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add WIZ and SERDES PHY nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j712s2-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu: Add the mcu domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add ESM instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert NAVSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Convert DMSS to simple-bus (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix HDMI Audio overlay in Makefile (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Drop i2c-1 to 100Khz (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add nodes for McASP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for C71x DSP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for C71x DSPs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add C7x remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add MAIN R5F remote processsor nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu: Add MCU R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCU domain ESM instance (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Fix typo in ramoops reg (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add GPIO expander on I2C0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add DT node for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add USB Type C swap defines for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: disable MIPI DSI bridge (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add I2C I/O expander (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: phycore-am64: Add RTC interrupt pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix indentation in watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-evm-gesi: Specify base dtb for overlay file (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Add boot phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: add iw416 based bluetooth (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Add DSI display support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for the AM62P5 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62P5 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add phase tags marking (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-beagleplay: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am62x-sk: Add overlay for HDMI audio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add node for DSS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: fix fss node dtbs check warnings (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix interrupt ranges for wkup & main gpio (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Add cfg reg region to ringacc node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dahlia: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: dev: add sound card (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: verdin-am62: Set I2S_1 MCLK rate (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable AUDIO_REFCLKx (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: correct pinmux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ospi (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add HDMI support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add DSS node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fix epwm_tbclk node name to generic name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Merge the two main_conf nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Remove syscon compatible from epwm_tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable dual role support for Type-C port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-verdin: enable CAN_2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add MCU MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add DT node for UFS (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports with GESI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Remove power-domains from crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for SERDES MUX idle-state values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Remove Duplicated wkup_i2c0 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Fix compatible of ti,*-ehrpwm-tbclk (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing space before { (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: minor whitespace cleanup around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Unify pin group node names for make dtbs checks (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 yavia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 dahlia (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add verdin am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM625 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add ESM support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Remove 0x unit address prefix from nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-som: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix wkup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: remove duplicate main_i2c0 pin mux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Use phandle to stdout UART node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Only set UART baud for used ports (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Drop SoC level aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Define aliases at board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Add wakeup_uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Add uart pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-som/common-proc-board: Add product links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add missing uart pinmuxes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot*: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Change CPTS clock parent (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Enable mcu network port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Fix main_i2c0 alias (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Fix mcan node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add sa3_secproxy (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add LED controller to phyBOARD-Electra (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Add eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3: j721s2/j784s4: Switch to https links (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721s2: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j784s4: Add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add VTM node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Enable Type-C port for USB0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-som: Enable I2C (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix physical address of pin (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: add missing cache properties (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Drop aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add board detect eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing PMIC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62x-sk-common: Drop bootargs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Rename regulator node name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Fix mmc1 pinmux (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add general purpose timers (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Add eMMC mmc0 support (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Enable audio on SK-AM62(-LP) (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add McASP nodes (Andrew Halaney) [RHEL-25014]
- arm64: ti: dts: Add support for AM62x LP SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Refractor AM625 SK dts (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ti,vbus-divider property to usbss1 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add MCSPI nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-am625-beagleplay (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk-base-board: Update IO EXP GPIO lines for Rev E2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Add overlay to enable CPSW5G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add CPSW5G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add overlay to enable CPSW9G ports in QSGMII mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-wakeup: Introduce RTC node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Add pinmux information for ADC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add CPSW9G nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-evm: Enable MCU CPSW2G (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support for ADC nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Use local header for pinctrl register values (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Remove firmware-name override for R5F (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Correct L2 cache size to 512KB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j784s4-*: Add 'ti,sci-dev-id' for NAVSS nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Fix DDR size to full 4GB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix GPIO numbers in DT (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Rearrange entries alphabetically (Andrew Halaney) [RHEL-25014]
- arch: arm64: dts: Add support for AM69 Starter Kit (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for M.2 variant (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add layout of OSPI flash (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix wakeup pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for AM68 SK System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: Update cache properties for ti (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for phyBOARD-Electra-AM642 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J784S4 EVM board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable USB1 node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a7-sk: Enable ethernet port (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-main: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J784S4 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add support for USB (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Fix clocks for McSPI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add k3-j721e-beagleboneai64 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop RNG clock (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-common-proc-board: Fix sound node-name (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add general purpose timers for am62 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Add general purpose timers for am65 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Configure pinctrl for timer IO pads (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Trim addresses to 8 digits (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625: Introduce operating-points table (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable McASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Rename clock-names adc_tsc_fck to fck (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable OSPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SDHCI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable GPMC and ELM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MCAN nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable MDIO nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: MDIO pinmux should belong to the MDIO node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable PCIe nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable ECAP nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable EPWM nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable SPI nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable I2C nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Enable UART nodes at the board level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: fix main pinmux range (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62A7-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce AM62A7 family of SoCs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Disable RNG node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add GPMC memory controller node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: fix RNG node clock id (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add main_cpts label (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-main: Enable crypto accelerator (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable ramoops (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pinmux corresponding to main_uart0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Align gpio-key node names with dtschema (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Adjust whitespace around '=' (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable HDMI (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Enable DisplayPort (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-*: add DP & DP PHY (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add SA3UL ranges in cbass_main (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62-mcu: Enable MCU GPIO module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Add ECAP APWM nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am625-sk: Enable on board peripherals (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am62: Add more peripheral nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: remove incorrect UART base clock rates (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Enable WLAN connected to SDHCI0 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for AM62-SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Introduce base support for AM62x SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Drop address and size cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Fix gic-v3 compatible regs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-mcu-wakeup: Fix the interrupt-parent for wkup_gpioX instances (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64: Add ESM0 to device memory map (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65*: Remove #address-cells/#size-cells from flash nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add RTI watchdog nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2 (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721s2: Move aliases to board dts (Andrew Halaney) [RHEL-25014]
- arch: arm64: ti: Add support J721S2 Common Processor Board (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 System on Module (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add initial support for J721S2 SoC (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Add support for MCAN nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-mcu: Add Support for MCAN (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: add timesync router node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Correct the d-cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642: Fix the L2 cache sets (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e: correct cache-sets info (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Add support for J721E SK (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add support for product generation 2 boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Disable SR2.0-only PRUs (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ICSSG nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: Makefile: Collate AM64 platforms together (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65: Relocate thermal-zones to SoC specific location (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: ti-k3*: Introduce aliases for mmc nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am65-main: Cleanup "ranges" property in "pcie" DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Add *max-virtual-functions* for pcie-ep DT node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: j7200-main: Fix "vendor-id"/"device-id" properties of pcie node (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "bus-range" upto 256 bus number for PCIe (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-j721e-main: Fix "max-virtual-functions" in PCIe EP nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-mcu: Add pinctrl (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-sk: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am642-evm: Add pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add ecap pwm nodes (Andrew Halaney) [RHEL-25014]
- arm64: dts: ti: k3-am64-main: Add epwm nodes (Andrew Halaney) [RHEL-25014]
- kbuild: Cleanup DT Overlay intermediate files as appropriate (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built into .dtbo.S files (Andrew Halaney) [RHEL-25014]
- kbuild: Allow DTB overlays to built from .dtso named source files (Andrew Halaney) [RHEL-25014]
- tools/rtla: Exit with EXIT_SUCCESS when help is invoked (John Kacur) [RHEL-28660]
- tools/rtla: Replace setting prio with nice for SCHED_OTHER (John Kacur) [RHEL-28660]
- tools/rtla: Remove unused sched_getattr() function (John Kacur) [RHEL-28660]
- tools/rtla: Fix clang warning about mount_point var size (John Kacur) [RHEL-28660]
- tools/rtla: Fix uninitialized bucket/data->bucket_size warning (John Kacur) [RHEL-28660]
- tools/rtla: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- tools/rv: Fix curr_reactor uninitialized variable (John Kacur) [RHEL-28660]
- tools/rv: Fix Makefile compiler options for clang (John Kacur) [RHEL-28660]
- netfs, fscache: Prevent Oops in fscache_put_cache() (Pavel Reichl) [RHEL-28890] {CVE-2024-26612}
- bnx2fc: Remove spin_lock_bh while release resources after upload. (John Meneghini) [RHEL-9662]
- ice: fold ice_ptp_read_time into ice_ptp_gettimex64 (Michal Schmidt) [RHEL-19000]
- ice: avoid the PTP hardware semaphore in gettimex64 path (Michal Schmidt) [RHEL-19000]
- ice: add ice_adapter for shared data across PFs on the same NIC (Michal Schmidt) [RHEL-19000]
- overlay: disable EVM (Coiby Xu) [RHEL-29566]
- evm: add support to disable EVM on unsupported filesystems (Coiby Xu) [RHEL-29566]
- evm: don't copy up 'security.evm' xattr (Coiby Xu) [RHEL-29566]
- mm, vmscan: remove ISOLATE_UNMAPPED (Nico Pache) [RHEL-28667]
- trace-vmscan-postprocess: sync with tracepoints updates (Nico Pache) [RHEL-28667]
- tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate (Nico Pache) [RHEL-28667]
- mm/mglru: skip special VMAs in lru_gen_look_around() (Nico Pache) [RHEL-28667]
- mm/mglru: reclaim offlined memcgs harder (Nico Pache) [RHEL-28667]
- mm/mglru: try to stop at high watermarks (Nico Pache) [RHEL-28667]
- mm/mglru: fix underprotected page cache (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: reuse some legacy trace events (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: improve design doc (Nico Pache) [RHEL-28667]
- mm: multi-gen LRU: clean up sysfs code (Nico Pache) [RHEL-28667]
- printk: allow disabling printk per-console device kthreads at boot (Luis Claudio R. Goncalves) [RHEL-17709]
- powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV (Mamatha Inamdar) [RHEL-25055]
- IB/hfi1: Fix sdma.h tx->num_descs off-by-one error (Daniel Vacek) [RHEL-26063]
- ASoC: Intel: soc-acpi: rt713+rt1316, no sdw-dmic config (Jaroslav Kysela) [RHEL-26456]
- hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed (Maxim Levitsky) [RHEL-26435]
- hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove (Maxim Levitsky) [RHEL-26435]
- mlxsw: spectrum_acl_tcam: Fix stack corruption (Ivan Vecera) [RHEL-26463] {CVE-2024-26586}
* Wed Mar 20 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-432.el9] * Wed Mar 20 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-432.el9]
- mm/page_alloc: don't wake kswapd from rmqueue() unless __GFP_KSWAPD_RECLAIM is specified (Waiman Long) [RHEL-24120] - mm/page_alloc: don't wake kswapd from rmqueue() unless __GFP_KSWAPD_RECLAIM is specified (Waiman Long) [RHEL-24120]
- debugobjects: Recheck debug_objects_enabled before reporting (Waiman Long) [RHEL-24120] - debugobjects: Recheck debug_objects_enabled before reporting (Waiman Long) [RHEL-24120]

View File

@ -1,3 +1,3 @@
SHA512 (linux-5.14.0-432.el9.tar.xz) = 43d6827933307dae1197851b1dc5d5a71e4fb8c866f0085a409ee1e51d834510ea8abe1b8557145e7a47a890f6a88b6cf313027776c805bee214cee50e5468ac SHA512 (linux-5.14.0-433.el9.tar.xz) = ca3c1d7682caecf11144268cccb36576cde2e751bcd6a0db1c89c9c050e54eb54203c1b04b5f95e2795f9e02ed3bdf3498caf9dec0f1909660360a364f183a92
SHA512 (kernel-abi-stablelists-5.14.0-432.el9.tar.bz2) = d0403543b382c09ecb762e498df23e2f9a641200e95cebf26cdf6270e2e1a47fe0fccac0a88e2412462194f43911b18ac18f06689b0f4bcc5d84e53dca930a69 SHA512 (kernel-abi-stablelists-5.14.0-433.el9.tar.bz2) = c60938fa4d21861cf93c67f27ef728e9830583016b04ce00360655376fc86a83e7b1e52d64fc8f76e8d9975195e280e0f9936909ed4bf5020d43034d0169033a
SHA512 (kernel-kabi-dw-5.14.0-432.el9.tar.bz2) = 9a2e8630ed198f3dcb684903118f5f48c3536bd93f2ae7b92661c26513e7dfd5a87f5c736688dfc81eba4a2bc949319183de9b285d6ce70bb40e9bd09346b220 SHA512 (kernel-kabi-dw-5.14.0-433.el9.tar.bz2) = 7d3c0e8cfd53454331ef4bf7f2ddc6c5451038e79f6ef31c632c4cef4a4deec936f3bdab203938db2f0775923c857d31eac692cb49848180d7486884304788ac