rpms/kernel
9
2
Fork 6
Code Issues Pull Requests Releases Activity

kernel-6.12.0-203.el10

Browse Source 
* Tue Feb 10 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [6.12.0-203.el10]
- nouveau/gsp: fix suspend/resume regression on r570 firmware (José Expósito) [RHEL-141658]
- nouveau: add a third state to the fini handler. (José Expósito) [RHEL-141658]
- nouveau/gsp: use rpc sequence numbers properly. (José Expósito) [RHEL-141658]
- redhat/dracut-virt.conf: omit drm drivers in UKI initrd (Li Tian) [RHEL-146125]
- scsi: storvsc: Process unsupported MODE_SENSE_10 (Li Tian) [RHEL-147285]
- dpll: expose fractional frequency offset in ppt (Ivan Vecera) [RHEL-129484]
- dpll: zl3073x: Implement device mode setting support (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to set working mode (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to get supported modes (Ivan Vecera) [RHEL-140641]
- mei: me: add wildcat lake P DID (Steve Best) [RHEL-95680]
- redhat/configs: ftrace: enable FUNCTION_GRAPH_RETVAL (Jerome Marchand) [RHEL-105766]
- KVM: x86: Don't clear async #PF queue when CR0.PG is disabled (e.g. on #SMI) (Maxim Levitsky) [RHEL-127414]
- KVM: x86: Fix a semi theoretical bug in kvm_arch_async_page_present_queued() (Maxim Levitsky) [RHEL-127414]
- cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based invariance before subsys (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag (Mark Langsdorf) [RHEL-120319]
- PM: cpufreq: powernv/tracing: Move powernv_throttle trace event (Mark Langsdorf) [RHEL-120319]
- drivers: cpufreq: add Tegra114 support (Mark Langsdorf) [RHEL-120319]
- cpufreq: Exit governor when failed to start old governor (Mark Langsdorf) [RHEL-120319]
- cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Init policy->rwsem before it may be possibly used (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based frequency-invariance later (Mark Langsdorf) [RHEL-120319]
- cpufreq: Remove duplicate check in __cpufreq_offline() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs (Mark Langsdorf) [RHEL-120319]
- cpufreq: tegra124: Allow building as a module (Mark Langsdorf) [RHEL-120319]
- cpufreq: dt: Add register helper (Mark Langsdorf) [RHEL-120319]
- cpufreq: Export disable_cpufreq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: brcmstb-avs: Fully open-code compatible for grepping (Mark Langsdorf) [RHEL-120319]
- cpufreq: apple: drop default ARCH_APPLE in Kconfig (Mark Langsdorf) [RHEL-120319]
- cpufreq: userspace: set CPUFREQ_GOV_STRICT_TARGET flag (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove forward declaration of cppc_cpufreq_register_em() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Do not return a value from populate_efficiency_class() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove cpu_data_list (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Add support for autonomous selection (Mark Langsdorf) [RHEL-120319]
- cpufreq: Update sscanf() to kstrtouint() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Replace magic number (Mark Langsdorf) [RHEL-120319]
- cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add Rust-based cpufreq-dt driver (Mark Langsdorf) [RHEL-120319]
- cpufreq: drop redundant cpus_read_lock() from store_local_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas() (Mark Langsdorf) [RHEL-120319]
- powernow: use pr_info_once (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: schedutil: Add helper for governor checks (Mark Langsdorf) [RHEL-120319]
- cpufreq: Force sync policy boost with global boost on sysfs update (Mark Langsdorf) [RHEL-120319]
- cpufreq: Preserve policy's boost state after resume (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce policy_set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Don't unnecessarily call set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop unused cpufreq_get_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce cpufreq_policy_refresh() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use __free() for policy reference counting cleanup (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop cpufreq_cpu_acquire() and cpufreq_cpu_release() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use locking guard and __free() in cpufreq_update_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add and use cpufreq policy locking guards (Mark Langsdorf) [RHEL-120319]
- cpufreq: Split cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Consolidate some code in cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: intel_pstate: Rearrange max frequency updates handling code (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: modify CONFIG_OF dependency (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Depends on OF (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver (Mark Langsdorf) [RHEL-120319]
Resolves: RHEL-105766, RHEL-120319, RHEL-127414, RHEL-129484, RHEL-140641, RHEL-141658, RHEL-146125, RHEL-147285, RHEL-95680

Signed-off-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com>
This commit is contained in:
CKI KWF Bot 2026-02-10 13:46:26 +00:00
parent f9da12b441
commit 5f33dad3d6
24 changed files with 209 additions and 84 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile.rhelver
View File

@ -12,7 +12,7 @@ RHEL_MINOR = 2
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
RHEL_RELEASE = 202
RHEL_RELEASE = 203
#
# RHEL_REBASE_NUM

2
dracut-virt.conf
View File

@ -7,6 +7,8 @@ early_microcode="no"
# modules: basics
dracutmodules+=" dracut-systemd i18n shutdown "
# Omit drm.
omit_dracutmodules += " drm simpledrm "
# modules: storage support
dracutmodules+=" dm lvm rootfs-block fs-lib "

8
kernel-aarch64-64k-debug-rhel.config
View File

@ -2282,7 +2282,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3446,7 +3446,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4855,7 +4855,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8398,7 +8398,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-64k-rhel.config
View File

@ -2266,7 +2266,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3425,7 +3425,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4834,7 +4834,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8373,7 +8373,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-debug-rhel.config
View File

@ -2279,7 +2279,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3443,7 +3443,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4852,7 +4852,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8394,7 +8394,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-rhel.config
View File

@ -2263,7 +2263,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3422,7 +3422,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4831,7 +4831,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8369,7 +8369,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-rt-64k-debug-rhel.config
View File

@ -2321,7 +2321,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3487,7 +3487,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4896,7 +4896,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8447,7 +8447,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-rt-64k-rhel.config
View File

@ -2305,7 +2305,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3466,7 +3466,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4875,7 +4875,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8422,7 +8422,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-rt-debug-rhel.config
View File

@ -2318,7 +2318,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3484,7 +3484,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4893,7 +4893,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8443,7 +8443,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-aarch64-rt-rhel.config
View File

@ -2302,7 +2302,7 @@ CONFIG_FTRACE=y
CONFIG_FUJITSU_ERRATUM_010001=y
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3463,7 +3463,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4872,7 +4872,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8418,7 +8418,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-ppc64le-debug-rhel.config
View File

@ -1995,7 +1995,7 @@ CONFIG_FTRACE=y
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3106,7 +3106,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM_XICS=y
# CONFIG_KXCJK1013 is not set
@ -4465,7 +4465,7 @@ CONFIG_NVRAM=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7818,7 +7818,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-ppc64le-rhel.config
View File

@ -1979,7 +1979,7 @@ CONFIG_FTRACE=y
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3086,7 +3086,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM_XICS=y
# CONFIG_KXCJK1013 is not set
@ -4445,7 +4445,7 @@ CONFIG_NVRAM=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7795,7 +7795,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-riscv64-debug-rhel.config
View File

@ -1993,7 +1993,7 @@ CONFIG_FTRACE=y
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3072,7 +3072,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4424,7 +4424,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7725,7 +7725,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-riscv64-rhel.config
View File

@ -1977,7 +1977,7 @@ CONFIG_FTRACE=y
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3052,7 +3052,7 @@ CONFIG_KVM_IOAPIC=y
CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
CONFIG_KVM=y
# CONFIG_KXCJK1013 is not set
@ -4404,7 +4404,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7702,7 +7702,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-s390x-debug-rhel.config
View File

@ -1999,7 +1999,7 @@ CONFIG_FTRACE_SYSCALLS=y
CONFIG_FTRACE=y
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3084,7 +3084,7 @@ CONFIG_KVM_MAX_NR_VCPUS=4096
CONFIG_KVM_PROVE_MMU=y
# CONFIG_KVM_S390_UCONTROL is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4444,7 +4444,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7802,7 +7802,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-s390x-rhel.config
View File

@ -1983,7 +1983,7 @@ CONFIG_FTRACE_SYSCALLS=y
CONFIG_FTRACE=y
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3064,7 +3064,7 @@ CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
# CONFIG_KVM_S390_UCONTROL is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4424,7 +4424,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7779,7 +7779,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-s390x-zfcpdump-rhel.config
View File

@ -1986,7 +1986,7 @@ CONFIG_FTRACE_SYSCALLS=y
# CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FUNCTION_TRACER=y
@ -3072,7 +3072,7 @@ CONFIG_KVM_MAX_NR_VCPUS=4096
# CONFIG_KVM_PROVE_MMU is not set
# CONFIG_KVM_S390_UCONTROL is not set
CONFIG_KVM_SMM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4435,7 +4435,7 @@ CONFIG_NVME_TCP_TLS=y
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -7800,7 +7800,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
# CONFIG_WDAT_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-x86_64-debug-rhel.config
View File

@ -2157,7 +2157,7 @@ CONFIG_FUJITSU_ES=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3340,7 +3340,7 @@ CONFIG_KVM_MMU_AUDIT=y
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
CONFIG_KVM_SW_PROTECTED_VM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4741,7 +4741,7 @@ CONFIG_NVSW_SN2201=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8225,7 +8225,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-x86_64-rhel.config
View File

@ -2141,7 +2141,7 @@ CONFIG_FUJITSU_ES=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3320,7 +3320,7 @@ CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
CONFIG_KVM_SW_PROTECTED_VM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4721,7 +4721,7 @@ CONFIG_NVSW_SN2201=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8201,7 +8201,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-x86_64-rt-debug-rhel.config
View File

@ -2196,7 +2196,7 @@ CONFIG_FUJITSU_ES=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3381,7 +3381,7 @@ CONFIG_KVM_MMU_AUDIT=y
CONFIG_KVM_PROVE_MMU=y
CONFIG_KVM_SMM=y
CONFIG_KVM_SW_PROTECTED_VM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4782,7 +4782,7 @@ CONFIG_NVSW_SN2201=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8274,7 +8274,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

8
kernel-x86_64-rt-rhel.config
View File

@ -2180,7 +2180,7 @@ CONFIG_FUJITSU_ES=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_FUNCTION_ERROR_INJECTION is not set
# CONFIG_FUNCTION_GRAPH_RETVAL is not set
CONFIG_FUNCTION_GRAPH_RETVAL=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FUNCTION_TRACER=y
@ -3361,7 +3361,7 @@ CONFIG_KVM_MMU_AUDIT=y
# CONFIG_KVM_PROVE_MMU is not set
CONFIG_KVM_SMM=y
CONFIG_KVM_SW_PROTECTED_VM=y
# CONFIG_KVM_WERROR is not set
CONFIG_KVM_WERROR=y
# CONFIG_KVM_XEN is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_KXSD9 is not set
@ -4762,7 +4762,7 @@ CONFIG_NVSW_SN2201=m
# CONFIG_NXP_CBTX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_OA_TC6 is not set
# CONFIG_OBJTOOL_WERROR is not set
CONFIG_OBJTOOL_WERROR=y
# CONFIG_OCFS2_FS is not set
CONFIG_OCTEON_EP=m
# CONFIG_OCTEONEP_VDPA is not set
@ -8250,7 +8250,7 @@ CONFIG_WATCH_QUEUE=y
# CONFIG_WCN36XX is not set
CONFIG_WDAT_WDT=m
# CONFIG_WDTPCI is not set
# CONFIG_WERROR is not set
CONFIG_WERROR=y
# CONFIG_WFX is not set
# CONFIG_WIL6210 is not set
# CONFIG_WILC1000_SDIO is not set

62
kernel.changelog
View File

@ -1,3 +1,65 @@
* Tue Feb 10 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [6.12.0-203.el10]
- nouveau/gsp: fix suspend/resume regression on r570 firmware (José Expósito) [RHEL-141658]
- nouveau: add a third state to the fini handler. (José Expósito) [RHEL-141658]
- nouveau/gsp: use rpc sequence numbers properly. (José Expósito) [RHEL-141658]
- redhat/dracut-virt.conf: omit drm drivers in UKI initrd (Li Tian) [RHEL-146125]
- scsi: storvsc: Process unsupported MODE_SENSE_10 (Li Tian) [RHEL-147285]
- dpll: expose fractional frequency offset in ppt (Ivan Vecera) [RHEL-129484]
- dpll: zl3073x: Implement device mode setting support (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to set working mode (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to get supported modes (Ivan Vecera) [RHEL-140641]
- mei: me: add wildcat lake P DID (Steve Best) [RHEL-95680]
- redhat/configs: ftrace: enable FUNCTION_GRAPH_RETVAL (Jerome Marchand) [RHEL-105766]
- KVM: x86: Don't clear async #PF queue when CR0.PG is disabled (e.g. on #SMI) (Maxim Levitsky) [RHEL-127414]
- KVM: x86: Fix a semi theoretical bug in kvm_arch_async_page_present_queued() (Maxim Levitsky) [RHEL-127414]
- cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based invariance before subsys (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag (Mark Langsdorf) [RHEL-120319]
- PM: cpufreq: powernv/tracing: Move powernv_throttle trace event (Mark Langsdorf) [RHEL-120319]
- drivers: cpufreq: add Tegra114 support (Mark Langsdorf) [RHEL-120319]
- cpufreq: Exit governor when failed to start old governor (Mark Langsdorf) [RHEL-120319]
- cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Init policy->rwsem before it may be possibly used (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based frequency-invariance later (Mark Langsdorf) [RHEL-120319]
- cpufreq: Remove duplicate check in __cpufreq_offline() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs (Mark Langsdorf) [RHEL-120319]
- cpufreq: tegra124: Allow building as a module (Mark Langsdorf) [RHEL-120319]
- cpufreq: dt: Add register helper (Mark Langsdorf) [RHEL-120319]
- cpufreq: Export disable_cpufreq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: brcmstb-avs: Fully open-code compatible for grepping (Mark Langsdorf) [RHEL-120319]
- cpufreq: apple: drop default ARCH_APPLE in Kconfig (Mark Langsdorf) [RHEL-120319]
- cpufreq: userspace: set CPUFREQ_GOV_STRICT_TARGET flag (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove forward declaration of cppc_cpufreq_register_em() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Do not return a value from populate_efficiency_class() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove cpu_data_list (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Add support for autonomous selection (Mark Langsdorf) [RHEL-120319]
- cpufreq: Update sscanf() to kstrtouint() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Replace magic number (Mark Langsdorf) [RHEL-120319]
- cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add Rust-based cpufreq-dt driver (Mark Langsdorf) [RHEL-120319]
- cpufreq: drop redundant cpus_read_lock() from store_local_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas() (Mark Langsdorf) [RHEL-120319]
- powernow: use pr_info_once (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: schedutil: Add helper for governor checks (Mark Langsdorf) [RHEL-120319]
- cpufreq: Force sync policy boost with global boost on sysfs update (Mark Langsdorf) [RHEL-120319]
- cpufreq: Preserve policy's boost state after resume (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce policy_set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Don't unnecessarily call set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop unused cpufreq_get_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce cpufreq_policy_refresh() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use __free() for policy reference counting cleanup (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop cpufreq_cpu_acquire() and cpufreq_cpu_release() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use locking guard and __free() in cpufreq_update_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add and use cpufreq policy locking guards (Mark Langsdorf) [RHEL-120319]
- cpufreq: Split cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Consolidate some code in cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: intel_pstate: Rearrange max frequency updates handling code (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: modify CONFIG_OF dependency (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Depends on OF (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver (Mark Langsdorf) [RHEL-120319]
Resolves: RHEL-105766, RHEL-120319, RHEL-127414, RHEL-129484, RHEL-140641, RHEL-141658, RHEL-146125, RHEL-147285, RHEL-95680
* Fri Feb 06 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [6.12.0-202.el10]
- net: bridge: annotate data-races around fdb->{updated,used} (Mohammad Heib) [RHEL-123945]
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress (Mohammad Heib) [RHEL-123945]

69
kernel.spec
View File

@ -176,15 +176,15 @@ Summary: The Linux kernel
%define specrpmversion 6.12.0
%define specversion 6.12.0
%define patchversion 6.12
%define pkgrelease 202
%define pkgrelease 203
%define kversion 6
%define tarfile_release 6.12.0-202.el10
%define tarfile_release 6.12.0-203.el10
# This is needed to do merge window version magic
%define patchlevel 12
# This allows pkg_release to have configurable %%{?dist} tag
%define specrelease 202%{?buildid}%{?dist}
%define specrelease 203%{?buildid}%{?dist}
# This defines the kabi tarball version
%define kabiversion 6.12.0-202.el10
%define kabiversion 6.12.0-203.el10
# If this variable is set to 1, a bpf selftests build failure will cause a
# fatal kernel package build error
@ -4481,6 +4481,67 @@ fi\
#
#
%changelog
* Tue Feb 10 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [6.12.0-203.el10]
- nouveau/gsp: fix suspend/resume regression on r570 firmware (José Expósito) [RHEL-141658]
- nouveau: add a third state to the fini handler. (José Expósito) [RHEL-141658]
- nouveau/gsp: use rpc sequence numbers properly. (José Expósito) [RHEL-141658]
- redhat/dracut-virt.conf: omit drm drivers in UKI initrd (Li Tian) [RHEL-146125]
- scsi: storvsc: Process unsupported MODE_SENSE_10 (Li Tian) [RHEL-147285]
- dpll: expose fractional frequency offset in ppt (Ivan Vecera) [RHEL-129484]
- dpll: zl3073x: Implement device mode setting support (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to set working mode (Ivan Vecera) [RHEL-140641]
- dpll: add dpll_device op to get supported modes (Ivan Vecera) [RHEL-140641]
- mei: me: add wildcat lake P DID (Steve Best) [RHEL-95680]
- redhat/configs: ftrace: enable FUNCTION_GRAPH_RETVAL (Jerome Marchand) [RHEL-105766]
- KVM: x86: Don't clear async #PF queue when CR0.PG is disabled (e.g. on #SMI) (Maxim Levitsky) [RHEL-127414]
- KVM: x86: Fix a semi theoretical bug in kvm_arch_async_page_present_queued() (Maxim Levitsky) [RHEL-127414]
- cpufreq: scmi: Account for malformed DT in scmi_dev_used_by_cpus() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based invariance before subsys (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag (Mark Langsdorf) [RHEL-120319]
- PM: cpufreq: powernv/tracing: Move powernv_throttle trace event (Mark Langsdorf) [RHEL-120319]
- drivers: cpufreq: add Tegra114 support (Mark Langsdorf) [RHEL-120319]
- cpufreq: Exit governor when failed to start old governor (Mark Langsdorf) [RHEL-120319]
- cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Init policy->rwsem before it may be possibly used (Mark Langsdorf) [RHEL-120319]
- cpufreq: Initialize cpufreq-based frequency-invariance later (Mark Langsdorf) [RHEL-120319]
- cpufreq: Remove duplicate check in __cpufreq_offline() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs (Mark Langsdorf) [RHEL-120319]
- cpufreq: tegra124: Allow building as a module (Mark Langsdorf) [RHEL-120319]
- cpufreq: dt: Add register helper (Mark Langsdorf) [RHEL-120319]
- cpufreq: Export disable_cpufreq() (Mark Langsdorf) [RHEL-120319]
- cpufreq: brcmstb-avs: Fully open-code compatible for grepping (Mark Langsdorf) [RHEL-120319]
- cpufreq: apple: drop default ARCH_APPLE in Kconfig (Mark Langsdorf) [RHEL-120319]
- cpufreq: userspace: set CPUFREQ_GOV_STRICT_TARGET flag (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove forward declaration of cppc_cpufreq_register_em() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Do not return a value from populate_efficiency_class() (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Remove cpu_data_list (Mark Langsdorf) [RHEL-120319]
- cpufreq: CPPC: Add support for autonomous selection (Mark Langsdorf) [RHEL-120319]
- cpufreq: Update sscanf() to kstrtouint() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Replace magic number (Mark Langsdorf) [RHEL-120319]
- cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add Rust-based cpufreq-dt driver (Mark Langsdorf) [RHEL-120319]
- cpufreq: drop redundant cpus_read_lock() from store_local_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas() (Mark Langsdorf) [RHEL-120319]
- powernow: use pr_info_once (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: Move cpufreq-specific EAS checks to cpufreq (Mark Langsdorf) [RHEL-120319]
- cpufreq/sched: schedutil: Add helper for governor checks (Mark Langsdorf) [RHEL-120319]
- cpufreq: Force sync policy boost with global boost on sysfs update (Mark Langsdorf) [RHEL-120319]
- cpufreq: Preserve policy's boost state after resume (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce policy_set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Don't unnecessarily call set_boost() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop unused cpufreq_get_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Introduce cpufreq_policy_refresh() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use __free() for policy reference counting cleanup (Mark Langsdorf) [RHEL-120319]
- cpufreq: Drop cpufreq_cpu_acquire() and cpufreq_cpu_release() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Use locking guard and __free() in cpufreq_update_policy() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Add and use cpufreq policy locking guards (Mark Langsdorf) [RHEL-120319]
- cpufreq: Split cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: Consolidate some code in cpufreq_online() (Mark Langsdorf) [RHEL-120319]
- cpufreq: intel_pstate: Rearrange max frequency updates handling code (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: modify CONFIG_OF dependency (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Depends on OF (Mark Langsdorf) [RHEL-120319]
- cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver (Mark Langsdorf) [RHEL-120319]
* Fri Feb 06 2026 CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com> [6.12.0-202.el10]
- net: bridge: annotate data-races around fdb->{updated,used} (Mohammad Heib) [RHEL-123945]
- bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress (Mohammad Heib) [RHEL-123945]

6
sources
View File

@ -1,5 +1,5 @@
SHA512 (kernel-abi-stablelists-6.6.0.tar.bz2) = 4f917598056dee5e23814621ec96ff2e4a411c8c4ba9d56ecb01b23cb96431825bedbecfcbaac9338efbf5cb21694d85497fa0bf43e7c80d9cd10bc6dd144dbd
SHA512 (kernel-kabi-dw-6.6.0.tar.bz2) = 19308cd976031d05e18ef7f5d093218acdb89446418bab0cd956ff12cf66369915b9e64bb66fa9f20939428a60e81884fec5be3529c6c7461738d6540d3cc5c6
SHA512 (linux-6.12.0-202.el10.tar.xz) = b47ad4eb434fde17bdaec629f9cf0b03a8299e98eb42b61bb62120e00ff5c6bc743b16cb7b97d156cf188e94b4264921826196f0d70a8cdede7075bb00111cb1
SHA512 (kernel-abi-stablelists-6.12.0-202.el10.tar.xz) = d3992bc974b09e664289ad3f667c3fd3235a601447c294eaf176d347bddec072750c1913fb0665f7768eaa3d0040a5972a36a41cf169318daeb29d344f732f17
SHA512 (kernel-kabi-dw-6.12.0-202.el10.tar.xz) = 73adccac6de250518d1da54d1cdf2b2dc894610016c3f647917395b139166a615e0799c49089d1ee9232918366960664fba993d4d03d7410af2b0eebff42e37f
SHA512 (linux-6.12.0-203.el10.tar.xz) = eac77f5e349923efb7e93741937a4069e69d08422c3fc2ac1c681d79e0cafb7902e00f9936bd579a828dd5db27cb81f6d39e6e071576f90cd37d745c35877ec6
SHA512 (kernel-abi-stablelists-6.12.0-203.el10.tar.xz) = 75150b07a4d08bbcf74e6755336dd74a99de1107a2da61216d7bab19eca6c29c2edba8b8b4ac3c3d73a7ba3612b52cd5362983e99f6d67ac01bf57fe5ad728fa
SHA512 (kernel-kabi-dw-6.12.0-203.el10.tar.xz) = 1f78621022275ce338b7bf3a97a8ed9706c97a6cce36362b02f6cdddede8c79b2ec3566d9e4dcae4900794c2951daa9e9d17c7e3791338ea31e71b6ce34dbf8c