Linux v4.13-11197-gf007cad159e9

0001-power-supply-max17042_battery-Add-support-for-ACPI-e.patch

@@ -1,78 +0,0 @@
-From 075bb90dbb4d894938c5859e3850987238db9cd8 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 11 Aug 2017 22:30:55 +0200
-Subject: [PATCH 1/2] power: supply: max17042_battery: Add support for ACPI
- enumeration
-
-Some x86 devices enumerate a max17047 fuel-gauge through a MAX17047
-ACPI firmware-node, add support for this.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/power/supply/max17042_battery.c | 22 +++++++++++++++++++++-
- 1 file changed, 21 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
-index aecaaa2b0586..b2ddb7eb69c6 100644
---- a/drivers/power/supply/max17042_battery.c
-+++ b/drivers/power/supply/max17042_battery.c
-@@ -22,6 +22,7 @@
-  * This driver is based on max17040_battery.c
-  */
- 
-+#include <linux/acpi.h>
- #include <linux/init.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-@@ -982,6 +983,8 @@ static int max17042_probe(struct i2c_client *client,
- 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
- 	const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
- 	struct power_supply_config psy_cfg = {};
-+	const struct acpi_device_id *acpi_id;
-+	struct device *dev = &client->dev;
- 	struct max17042_chip *chip;
- 	int ret;
- 	int i;
-@@ -995,7 +998,15 @@ static int max17042_probe(struct i2c_client *client,
- 		return -ENOMEM;
- 
- 	chip->client = client;
--	chip->chip_type = id->driver_data;
-+	if (id) {
-+		chip->chip_type = id->driver_data;
-+	} else {
-+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
-+		if (!acpi_id)
-+			return -ENODEV;
-+
-+		chip->chip_type = acpi_id->driver_data;
-+	}
- 	chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
- 	if (IS_ERR(chip->regmap)) {
- 		dev_err(&client->dev, "Failed to initialize regmap\n");
-@@ -1104,6 +1115,14 @@ static int max17042_resume(struct device *dev)
- static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
- 			max17042_resume);
- 
-+#ifdef CONFIG_ACPI
-+static const struct acpi_device_id max17042_acpi_match[] = {
-+	{ "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
-+	{ }
-+};
-+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
-+#endif
-+
- #ifdef CONFIG_OF
- static const struct of_device_id max17042_dt_match[] = {
- 	{ .compatible = "maxim,max17042" },
-@@ -1125,6 +1144,7 @@ MODULE_DEVICE_TABLE(i2c, max17042_id);
- static struct i2c_driver max17042_i2c_driver = {
- 	.driver	= {
- 		.name	= "max17042",
-+		.acpi_match_table = ACPI_PTR(max17042_acpi_match),
- 		.of_match_table = of_match_ptr(max17042_dt_match),
- 		.pm	= &max17042_pm_ops,
- 	},
--- 
-2.13.4
-

0002-power-supply-max17042_battery-Fix-ACPI-interrupt-iss.patch

@@ -1,80 +0,0 @@
-From 27b9d46d25c873b351757c44ce523bf0ede1d08e Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 14 Aug 2017 11:02:59 +0200
-Subject: [PATCH 2/2] power: supply: max17042_battery: Fix ACPI interrupt
- issues
-
-On some x86/ACPI boards the DSDT defines an ACPI event handler for
-the max17047 IRQ, this causes several problems:
-
-1) We need to share the IRQ to avoid an error getting it
-
-2) Even of we are willing to share, we may fail to share because some
-   DSDTs claim it exclusivly
-
-3) If we are unable to share the IRQ, or the IRQ is only listed as an
-   ACPI event source and not in the max1704 firmware node, then the
-   charge threshold IRQ (which is used to give an IRQ every 1 percent
-   charge change) becomes a problem, the ACPI event handler will not
-   update this to the next 1 percent threshold, so the IRQ keeps firing
-   and we get an IRQ storm pegging 1 CPU core.
-
-   This happens despite the max17042 driver not setting the charge
-   threshold because Windows uses it and leaves it set on reboot.
-
-   So if we are unable to get the IRQ we need to reprogram the
-   charge threshold to its disabled setting.
-
-This commit fixes al of the above, while at it it also makes the error
-msg when being unable to get the IRQ consistent with other messages.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/power/supply/max17042_battery.c | 20 +++++++++++++++-----
- 1 file changed, 15 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
-index b2ddb7eb69c6..18a44e4ed6ff 100644
---- a/drivers/power/supply/max17042_battery.c
-+++ b/drivers/power/supply/max17042_battery.c
-@@ -1050,11 +1050,18 @@ static int max17042_probe(struct i2c_client *client,
- 	}
- 
- 	if (client->irq) {
-+		unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
-+
-+		/*
-+		 * On ACPI systems the IRQ may be handled by ACPI-event code,
-+		 * so we need to share (if the ACPI code is willing to share).
-+		 */
-+		if (acpi_id)
-+			flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
-+
- 		ret = devm_request_threaded_irq(&client->dev, client->irq,
- 						NULL,
--						max17042_thread_handler,
--						IRQF_TRIGGER_FALLING |
--						IRQF_ONESHOT,
-+						max17042_thread_handler, flags,
- 						chip->battery->desc->name,
- 						chip);
- 		if (!ret) {
-@@ -1064,10 +1071,13 @@ static int max17042_probe(struct i2c_client *client,
- 			max17042_set_soc_threshold(chip, 1);
- 		} else {
- 			client->irq = 0;
--			dev_err(&client->dev, "%s(): cannot get IRQ\n",
--				__func__);
-+			if (ret != -EBUSY)
-+				dev_err(&client->dev, "Failed to get IRQ\n");
- 		}
- 	}
-+	/* Not able to update the charge threshold when exceeded? -> disable */
-+	if (!client->irq)
-+		regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
- 
- 	regmap_read(chip->regmap, MAX17042_STATUS, &val);
- 	if (val & STATUS_POR_BIT) {
--- 
-2.13.4
-

0015-i2c-cht-wc-Add-Intel-Cherry-Trail-Whiskey-Cove-SMBUS.patch

@@ -1,410 +0,0 @@
-From bd0d7169342e47919f68e75d659968f02b62f84b Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 3 Mar 2017 23:48:50 +0100
-Subject: [PATCH 15/16] i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS
- controller driver
-
-The Intel Cherry Trail Whiskey Cove PMIC does not contain a builtin
-battery charger, instead boards with this PMIC use an external TI
-bq24292i charger IC, which is connected to a SMBUS controller built into
-the PMIC.
-
-This commit adds an i2c-bus driver for the PMIC's builtin SMBUS
-controller. The probe function for this i2c-bus will also register an
-i2c-client for the TI bq24292i charger after the i2c-bus has been
-registered.
-
-Note that several device-properties are set on the client-device to
-tell the bq24190 power-supply driver to integrate the Whiskey Cove PMIC
-and e.g. use the PMIC's BC1.2 detection (through extcon) to determine
-the maximum input current.
-
-Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
-Changes in v2:
--Various style (mostly captialization and variable name) fixes
--Use device-properties instead of platform_data for the i2c_board_info
----
- drivers/i2c/busses/Kconfig      |   8 +
- drivers/i2c/busses/Makefile     |   1 +
- drivers/i2c/busses/i2c-cht-wc.c | 336 ++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 345 insertions(+)
- create mode 100644 drivers/i2c/busses/i2c-cht-wc.c
-
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index 144cbadc7c72..18c96178b177 100644
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -187,6 +187,14 @@ config I2C_PIIX4
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-piix4.
- 
-+config I2C_CHT_WC
-+	tristate "Intel Cherry Trail Whiskey Cove PMIC smbus controller"
-+	depends on INTEL_SOC_PMIC_CHTWC
-+	help
-+	  If you say yes to this option, support will be included for the
-+	  SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
-+	  found on some Intel Cherry Trail systems.
-+
- config I2C_NFORCE2
- 	tristate "Nvidia nForce2, nForce3 and nForce4"
- 	depends on PCI
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index 30b60855fbcd..f6443fa44f61 100644
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_I2C_ALI15X3)	+= i2c-ali15x3.o
- obj-$(CONFIG_I2C_AMD756)	+= i2c-amd756.o
- obj-$(CONFIG_I2C_AMD756_S4882)	+= i2c-amd756-s4882.o
- obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
-+obj-$(CONFIG_I2C_CHT_WC)	+= i2c-cht-wc.o
- obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
- obj-$(CONFIG_I2C_ISCH)		+= i2c-isch.o
- obj-$(CONFIG_I2C_ISMT)		+= i2c-ismt.o
-diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c
-new file mode 100644
-index 000000000000..ccf0785bcb75
---- /dev/null
-+++ b/drivers/i2c/busses/i2c-cht-wc.c
-@@ -0,0 +1,336 @@
-+/*
-+ * Intel CHT Whiskey Cove PMIC I2C Master driver
-+ * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
-+ * Copyright (C) 2011 - 2014 Intel Corporation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License version
-+ * 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/completion.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/mfd/intel_soc_pmic.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define CHT_WC_I2C_CTRL			0x5e24
-+#define CHT_WC_I2C_CTRL_WR		BIT(0)
-+#define CHT_WC_I2C_CTRL_RD		BIT(1)
-+#define CHT_WC_I2C_CLIENT_ADDR		0x5e25
-+#define CHT_WC_I2C_REG_OFFSET		0x5e26
-+#define CHT_WC_I2C_WRDATA		0x5e27
-+#define CHT_WC_I2C_RDDATA		0x5e28
-+
-+#define CHT_WC_EXTCHGRIRQ		0x6e0a
-+#define CHT_WC_EXTCHGRIRQ_CLIENT_IRQ	BIT(0)
-+#define CHT_WC_EXTCHGRIRQ_WRITE_IRQ	BIT(1)
-+#define CHT_WC_EXTCHGRIRQ_READ_IRQ	BIT(2)
-+#define CHT_WC_EXTCHGRIRQ_NACK_IRQ	BIT(3)
-+#define CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK	((u8)GENMASK(3, 1))
-+#define CHT_WC_EXTCHGRIRQ_MSK		0x6e17
-+
-+struct cht_wc_i2c_adap {
-+	struct i2c_adapter adapter;
-+	wait_queue_head_t wait;
-+	struct irq_chip irqchip;
-+	struct mutex irqchip_lock;
-+	struct regmap *regmap;
-+	struct irq_domain *irq_domain;
-+	struct i2c_client *client;
-+	int client_irq;
-+	u8 irq_mask;
-+	u8 old_irq_mask;
-+	bool nack;
-+	bool done;
-+};
-+
-+static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data)
-+{
-+	struct cht_wc_i2c_adap *adap = data;
-+	int ret, reg;
-+
-+	/* Read IRQs */
-+	ret = regmap_read(adap->regmap, CHT_WC_EXTCHGRIRQ, &reg);
-+	if (ret) {
-+		dev_err(&adap->adapter.dev, "Error reading extchgrirq reg\n");
-+		return IRQ_NONE;
-+	}
-+
-+	reg &= ~adap->irq_mask;
-+
-+	/*
-+	 * Immediately ack IRQs, so that if new IRQs arrives while we're
-+	 * handling the previous ones our irq will re-trigger when we're done.
-+	 */
-+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, reg);
-+	if (ret)
-+		dev_err(&adap->adapter.dev, "Error writing extchgrirq reg\n");
-+
-+	/*
-+	 * Do NOT use handle_nested_irq here, the client irq handler will
-+	 * likely want to do i2c transfers and the i2c controller uses this
-+	 * interrupt handler as well, so running the client irq handler from
-+	 * this thread will cause things to lock up.
-+	 */
-+	if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) {
-+		/*
-+		 * generic_handle_irq expects local IRQs to be disabled
-+		 * as normally it is called from interrupt context.
-+		 */
-+		local_irq_disable();
-+		generic_handle_irq(adap->client_irq);
-+		local_irq_enable();
-+	}
-+
-+	if (reg & CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK) {
-+		adap->nack = !!(reg & CHT_WC_EXTCHGRIRQ_NACK_IRQ);
-+		adap->done = true;
-+		wake_up(&adap->wait);
-+	}
-+
-+	return IRQ_HANDLED;
-+}
-+
-+static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap)
-+{
-+	/* This i2c adapter only supports SMBUS byte transfers */
-+	return I2C_FUNC_SMBUS_BYTE_DATA;
-+}
-+
-+static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr,
-+				      unsigned short flags, char read_write,
-+				      u8 command, int size,
-+				      union i2c_smbus_data *data)
-+{
-+	struct cht_wc_i2c_adap *adap = i2c_get_adapdata(_adap);
-+	int ret, reg;
-+
-+	adap->nack = false;
-+	adap->done = false;
-+
-+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CLIENT_ADDR, addr);
-+	if (ret)
-+		return ret;
-+
-+	if (read_write == I2C_SMBUS_WRITE) {
-+		ret = regmap_write(adap->regmap, CHT_WC_I2C_WRDATA, data->byte);
-+		if (ret)
-+			return ret;
-+	}
-+
-+	ret = regmap_write(adap->regmap, CHT_WC_I2C_REG_OFFSET, command);
-+	if (ret)
-+		return ret;
-+
-+	ret = regmap_write(adap->regmap, CHT_WC_I2C_CTRL,
-+			   (read_write == I2C_SMBUS_WRITE) ?
-+			   CHT_WC_I2C_CTRL_WR : CHT_WC_I2C_CTRL_RD);
-+	if (ret)
-+		return ret;
-+
-+	/* 3 second timeout, during cable plug the PMIC responds quite slow */
-+	ret = wait_event_timeout(adap->wait, adap->done, 3 * HZ);
-+	if (ret == 0)
-+		return -ETIMEDOUT;
-+	if (adap->nack)
-+		return -EIO;
-+
-+	if (read_write == I2C_SMBUS_READ) {
-+		ret = regmap_read(adap->regmap, CHT_WC_I2C_RDDATA, &reg);
-+		if (ret)
-+			return ret;
-+
-+		data->byte = reg;
-+	}
-+
-+	return 0;
-+}
-+
-+static const struct i2c_algorithm cht_wc_i2c_adap_algo = {
-+	.functionality = cht_wc_i2c_adap_master_func,
-+	.smbus_xfer = cht_wc_i2c_adap_smbus_xfer,
-+};
-+
-+/**** irqchip for the client connected to the extchgr i2c adapter ****/
-+static void cht_wc_i2c_irq_lock(struct irq_data *data)
-+{
-+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
-+
-+	mutex_lock(&adap->irqchip_lock);
-+}
-+
-+static void cht_wc_i2c_irq_sync_unlock(struct irq_data *data)
-+{
-+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
-+	int ret;
-+
-+	if (adap->irq_mask != adap->old_irq_mask) {
-+		ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK,
-+				   adap->irq_mask);
-+		if (ret == 0)
-+			adap->old_irq_mask = adap->irq_mask;
-+		else
-+			dev_err(&adap->adapter.dev, "Error writing EXTCHGRIRQ_MSK\n");
-+	}
-+
-+	mutex_unlock(&adap->irqchip_lock);
-+}
-+
-+static void cht_wc_i2c_irq_enable(struct irq_data *data)
-+{
-+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
-+
-+	adap->irq_mask &= ~CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
-+}
-+
-+static void cht_wc_i2c_irq_disable(struct irq_data *data)
-+{
-+	struct cht_wc_i2c_adap *adap = irq_data_get_irq_chip_data(data);
-+
-+	adap->irq_mask |= CHT_WC_EXTCHGRIRQ_CLIENT_IRQ;
-+}
-+
-+static const struct irq_chip cht_wc_i2c_irq_chip = {
-+	.irq_bus_lock		= cht_wc_i2c_irq_lock,
-+	.irq_bus_sync_unlock	= cht_wc_i2c_irq_sync_unlock,
-+	.irq_disable		= cht_wc_i2c_irq_disable,
-+	.irq_enable		= cht_wc_i2c_irq_enable,
-+	.name			= "cht_wc_ext_chrg_irq_chip",
-+};
-+
-+static const struct property_entry bq24190_props[] = {
-+	PROPERTY_ENTRY_STRING("extcon-name", "cht_wcove_pwrsrc"),
-+	PROPERTY_ENTRY_BOOL("omit-battery-class"),
-+	PROPERTY_ENTRY_BOOL("disable-reset"),
-+	{ }
-+};
-+
-+static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev)
-+{
-+	struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
-+	struct cht_wc_i2c_adap *adap;
-+	struct i2c_board_info board_info = {
-+		.type = "bq24190",
-+		.addr = 0x6b,
-+		.properties = bq24190_props,
-+	};
-+	int ret, irq;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq < 0) {
-+		dev_err(&pdev->dev, "Error missing irq resource\n");
-+		return -EINVAL;
-+	}
-+
-+	adap = devm_kzalloc(&pdev->dev, sizeof(*adap), GFP_KERNEL);
-+	if (!adap)
-+		return -ENOMEM;
-+
-+	init_waitqueue_head(&adap->wait);
-+	mutex_init(&adap->irqchip_lock);
-+	adap->irqchip = cht_wc_i2c_irq_chip;
-+	adap->regmap = pmic->regmap;
-+	adap->adapter.owner = THIS_MODULE;
-+	adap->adapter.class = I2C_CLASS_HWMON;
-+	adap->adapter.algo = &cht_wc_i2c_adap_algo;
-+	strlcpy(adap->adapter.name, "PMIC I2C Adapter",
-+		sizeof(adap->adapter.name));
-+	adap->adapter.dev.parent = &pdev->dev;
-+
-+	/* Clear and activate i2c-adapter interrupts, disable client IRQ */
-+	adap->old_irq_mask = adap->irq_mask = ~CHT_WC_EXTCHGRIRQ_ADAP_IRQMASK;
-+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ, ~adap->irq_mask);
-+	if (ret)
-+		return ret;
-+
-+	ret = regmap_write(adap->regmap, CHT_WC_EXTCHGRIRQ_MSK, adap->irq_mask);
-+	if (ret)
-+		return ret;
-+
-+	/* Alloc and register client IRQ */
-+	adap->irq_domain = irq_domain_add_linear(pdev->dev.of_node, 1,
-+						 &irq_domain_simple_ops, NULL);
-+	if (!adap->irq_domain)
-+		return -ENOMEM;
-+
-+	adap->client_irq = irq_create_mapping(adap->irq_domain, 0);
-+	if (!adap->client_irq) {
-+		ret = -ENOMEM;
-+		goto remove_irq_domain;
-+	}
-+
-+	irq_set_chip_data(adap->client_irq, adap);
-+	irq_set_chip_and_handler(adap->client_irq, &adap->irqchip,
-+				 handle_simple_irq);
-+
-+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-+					cht_wc_i2c_adap_thread_handler,
-+					IRQF_ONESHOT, "PMIC I2C Adapter", adap);
-+	if (ret)
-+		goto remove_irq_domain;
-+
-+	i2c_set_adapdata(&adap->adapter, adap);
-+	ret = i2c_add_adapter(&adap->adapter);
-+	if (ret)
-+		goto remove_irq_domain;
-+
-+	board_info.irq = adap->client_irq;
-+	adap->client = i2c_new_device(&adap->adapter, &board_info);
-+	if (!adap->client) {
-+		ret = -ENOMEM;
-+		goto del_adapter;
-+	}
-+
-+	platform_set_drvdata(pdev, adap);
-+	return 0;
-+
-+del_adapter:
-+	i2c_del_adapter(&adap->adapter);
-+remove_irq_domain:
-+	irq_domain_remove(adap->irq_domain);
-+	return ret;
-+}
-+
-+static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev)
-+{
-+	struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev);
-+
-+	i2c_unregister_device(adap->client);
-+	i2c_del_adapter(&adap->adapter);
-+	irq_domain_remove(adap->irq_domain);
-+
-+	return 0;
-+}
-+
-+static struct platform_device_id cht_wc_i2c_adap_id_table[] = {
-+	{ .name = "cht_wcove_ext_chgr" },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(platform, cht_wc_i2c_adap_id_table);
-+
-+struct platform_driver cht_wc_i2c_adap_driver = {
-+	.probe = cht_wc_i2c_adap_i2c_probe,
-+	.remove = cht_wc_i2c_adap_i2c_remove,
-+	.driver = {
-+		.name = "cht_wcove_ext_chgr",
-+	},
-+	.id_table = cht_wc_i2c_adap_id_table,
-+};
-+module_platform_driver(cht_wc_i2c_adap_driver);
-+
-+MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver");
-+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
-+MODULE_LICENSE("GPL");
--- 
-2.13.0
-

allwinner-net-emac.patch

@@ -332,314 +332,6 @@ index 11240a8313c2..d38282b9e5d4 100644
 -- 
 2.13.5
 
-From 4aba5ca95496899165ee7ceef5d9c60a6e7b15dd Mon Sep 17 00:00:00 2001
-From: Peter Robinson <pbrobinson@gmail.com>
-Date: Mon, 4 Sep 2017 13:04:47 +0100
-Subject: [PATCH 3/4] Revert "arm64: dts: allwinner: Revert EMAC changes"
-
-This reverts commit 87e1f5e8bb4bd584de0a8f3b1e42196dca221d02.
----
- .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts   | 16 ++++++++++++++++
- .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts    | 15 +++++++++++++++
- arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts  | 17 +++++++++++++++++
- .../dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 16 ++++++++++++++++
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi        | 20 ++++++++++++++++++++
- .../boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts     | 17 +++++++++++++++++
- .../boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts    | 17 +++++++++++++++++
- .../boot/dts/allwinner/sun50i-h5-orangepi-prime.dts  | 17 +++++++++++++++++
- 8 files changed, 135 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-index 6872135d7f84..ba2fde2909f9 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-@@ -51,6 +51,7 @@
- 	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
- 	};
-@@ -67,6 +68,14 @@
- 	};
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	status = "okay";
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -77,6 +86,13 @@
- 	bias-pull-up;
- };
- 
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-index f82ccf332c0f..24f1aac366d6 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
-@@ -48,3 +48,18 @@
- 
- 	/* TODO: Camera, touchscreen, etc. */
- };
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	status = "okay";
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-index 7c533b6d4ba9..827168bc22ed 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
-@@ -51,6 +51,7 @@
- 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
- 		serial2 = &uart2;
-@@ -78,6 +79,15 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rmii_pins>;
-+	phy-mode = "rmii";
-+	phy-handle = <&ext_rmii_phy1>;
-+	status = "okay";
-+
-+};
-+
- &i2c1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&i2c1_pins>;
-@@ -88,6 +98,13 @@
- 	bias-pull-up;
- };
- 
-+&mdio {
-+	ext_rmii_phy1: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins>;
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-index d891a1a27f6c..216e3a5dafae 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
-@@ -53,6 +53,7 @@
- 		     "allwinner,sun50i-a64";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -76,6 +77,21 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	status = "okay";
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc2_pins>;
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-index 68aadc9b96dc..bd0f33b77f57 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -449,6 +449,26 @@
- 			#size-cells = <0>;
- 		};
- 
-+		emac: ethernet@1c30000 {
-+			compatible = "allwinner,sun50i-a64-emac";
-+			syscon = <&syscon>;
-+			reg = <0x01c30000 0x10000>;
-+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "macirq";
-+			resets = <&ccu RST_BUS_EMAC>;
-+			reset-names = "stmmaceth";
-+			clocks = <&ccu CLK_BUS_EMAC>;
-+			clock-names = "stmmaceth";
-+			status = "disabled";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			mdio: mdio {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+			};
-+		};
-+
- 		gic: interrupt-controller@1c81000 {
- 			compatible = "arm,gic-400";
- 			reg = <0x01c81000 0x1000>,
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
-index 1c2387bd5df6..968908761194 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts
-@@ -50,6 +50,7 @@
- 	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -108,6 +109,22 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@7 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-index 4f77c8470f6c..a8296feee884 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -59,6 +59,7 @@
- 	};
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -136,12 +137,28 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
- &ir {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ir_pins_a>;
- 	status = "okay";
- };
- 
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-index 6be06873e5af..d906b302cbcd 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-@@ -54,6 +54,7 @@
- 	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
- 
- 	aliases {
-+		ethernet0 = &emac;
- 		serial0 = &uart0;
- 	};
- 
-@@ -143,12 +144,28 @@
- 	status = "okay";
- };
- 
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+	status = "okay";
-+};
-+
- &ir {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&ir_pins_a>;
- 	status = "okay";
- };
- 
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+	};
-+};
-+
- &mmc0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
--- 
-2.13.5
-
 From 11190f020b948ccdf15061b6df8cc2836a2afcb1 Mon Sep 17 00:00:00 2001
 From: Peter Robinson <pbrobinson@gmail.com>
 Date: Mon, 4 Sep 2017 13:04:55 +0100

arm-tegra-fix-gpu-iommu.patch

@@ -1,39 +0,0 @@
-From patchwork Sun Jul  9 16:36:14 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: ARM: tegra: Register host1x node with iommu binding on tegra124
-From: Paul Kocialkowski <contact@paulk.fr>
-X-Patchwork-Id: 9831825
-Message-Id: <20170709163614.6746-1-contact@paulk.fr>
-To: linux-arm-kernel@lists.infradead.org, linux-tegra@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Cc: Thierry Reding <thierry.reding@gmail.com>,
- Stephen Warren <swarren@wwwdotorg.org>,
- Mikko Perttunen <mperttunen@nvidia.com>,
- Paul Kocialkowski <contact@paulk.fr>, 
- Jonathan Hunter <jonathanh@nvidia.com>
-Date: Sun,  9 Jul 2017 19:36:14 +0300
-
-This registers the host1x node with the SMMU (as HC swgroup) to allow
-the host1x code to attach to it. It avoid failing the probe sequence,
-which resulted in the tegra drm driver not probing and thus nothing
-being displayed on-screen.
-
-Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
----
- arch/arm/boot/dts/tegra124.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
-index 187a36c6d0fc..b3b89befffeb 100644
---- a/arch/arm/boot/dts/tegra124.dtsi
-+++ b/arch/arm/boot/dts/tegra124.dtsi
-@@ -85,6 +85,7 @@
- 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
- 		resets = <&tegra_car 28>;
- 		reset-names = "host1x";
-+		iommus = <&mc TEGRA_SWGROUP_HC>;
- 
- 		#address-cells = <2>;
- 		#size-cells = <2>;

baseconfig/CONFIG_BATTERY_MAX1721X

@@ -0,0 +1 @@
+CONFIG_BATTERY_MAX1721X=m

baseconfig/CONFIG_QCOM_GLINK_SSR

@@ -0,0 +1 @@
+# CONFIG_QCOM_GLINK_SSR is not set

baseconfig/CONFIG_RESET_HSDK_V1

@@ -0,0 +1 @@
+# CONFIG_RESET_HSDK_V1 is not set

baseconfig/CONFIG_RPMSG_QCOM_GLINK_SMEM

@@ -0,0 +1 @@
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set

baseconfig/CONFIG_STRING_SELFTEST

@@ -0,0 +1 @@
+# CONFIG_STRING_SELFTEST is not set

baseconfig/arm/CONFIG_MESON_GX_SOCINFO

@@ -0,0 +1 @@
+CONFIG_MESON_GX_SOCINFO=y

baseconfig/arm/armv7/armv7/CONFIG_BATTERY_BQ27XXX_HDQ

@@ -0,0 +1 @@
+CONFIG_BATTERY_BQ27XXX_HDQ=m

baseconfig/arm/armv7/armv7/CONFIG_IMX_REMOTEPROC

@@ -0,0 +1 @@
+CONFIG_IMX_REMOTEPROC=m

baseconfig/x86/x86_64/CONFIG_DEVICE_PRIVATE

@@ -0,0 +1 @@
+CONFIG_DEVICE_PRIVATE=y

baseconfig/x86/x86_64/CONFIG_DEVICE_PUBLIC

@@ -0,0 +1 @@
+CONFIG_DEVICE_PUBLIC=y

baseconfig/x86/x86_64/CONFIG_HMM_MIRROR

@@ -0,0 +1 @@
+CONFIG_HMM_MIRROR=y

efi-lockdown.patch

@@ -1021,7 +1021,7 @@ index 43cb680..9be3e08 100644
 +		return -EPERM;
 +
  	status = wmi_evaluate_method(ASUS_WMI_MGMT_GUID,
- 				     1, asus->debug.method_id,
+ 				     0, asus->debug.method_id,
  				     &input, &output);
 -- 
 2.7.4

gitrev

@@ -1 +1 @@
-015a9e66b9b8c1f28097ed09bf9350708e26249a
+f007cad159e99fa2acd3b2e9364fbb32ad28b971

kernel-aarch64-debug.config

@@ -472,6 +472,7 @@ CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -2950,6 +2951,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_GXL_PHY=m
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 # CONFIG_MESON_WATCHDOG is not set
@@ -4224,6 +4226,7 @@ CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_EMAC=m
 # CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
 CONFIG_QCOM_FALKOR_ERRATUM_1009=y
+# CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HIDMA=m
 CONFIG_QCOM_HIDMA_MGMT=m
@@ -4409,6 +4412,7 @@ CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
 CONFIG_RESET_HISI=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4451,6 +4455,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 CONFIG_RPMSG=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=m
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPMSG_QCOM_SMD=m
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
@@ -5487,6 +5492,7 @@ CONFIG_STMMAC_ETH=m
 CONFIG_STMMAC_PLATFORM=m
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_STUB_CLK_HI6220=y

kernel-aarch64.config

@@ -472,6 +472,7 @@ CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -2930,6 +2931,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_GXL_PHY=m
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 # CONFIG_MESON_WATCHDOG is not set
@@ -4202,6 +4204,7 @@ CONFIG_QCOM_COINCELL=m
 CONFIG_QCOM_EMAC=m
 # CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
 CONFIG_QCOM_FALKOR_ERRATUM_1009=y
+# CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HIDMA=m
 CONFIG_QCOM_HIDMA_MGMT=m
@@ -4387,6 +4390,7 @@ CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
 CONFIG_RESET_HISI=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4429,6 +4433,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 CONFIG_RPMSG=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=m
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPMSG_QCOM_SMD=m
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
@@ -5464,6 +5469,7 @@ CONFIG_STMMAC_ETH=m
 CONFIG_STMMAC_PLATFORM=m
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_STUB_CLK_HI6220=y

kernel-armv7hl-debug.config

@@ -502,6 +502,7 @@ CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_BATMAN_ADV_NC=y
 CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
+CONFIG_BATTERY_BQ27XXX_HDQ=m
 CONFIG_BATTERY_BQ27XXX_I2C=m
 CONFIG_BATTERY_BQ27XXX=m
 CONFIG_BATTERY_DA9052=m
@@ -513,6 +514,7 @@ CONFIG_BATTERY_DA9052=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_RX51=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_TWL4030_MADC=m
@@ -2293,6 +2295,7 @@ CONFIG_IMX7_PM_DOMAINS=y
 CONFIG_IMX_DMA=m
 CONFIG_IMX_GPCV2=y
 CONFIG_IMX_IPUV3_CORE=m
+CONFIG_IMX_REMOTEPROC=m
 CONFIG_IMX_SDMA=m
 CONFIG_IMX_THERMAL=m
 CONFIG_IMX_WEIM=y
@@ -3148,6 +3151,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 # CONFIG_MESON_GXBB_WATCHDOG is not set
 # CONFIG_MESON_GXL_PHY is not set
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 CONFIG_MESON_WATCHDOG=m
@@ -4542,6 +4546,7 @@ CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=m
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
@@ -4747,6 +4752,7 @@ CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4789,6 +4795,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 CONFIG_RPMSG=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=m
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPMSG_QCOM_SMD=m
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
@@ -5964,6 +5971,7 @@ CONFIG_ST_REMOTEPROC=m
 CONFIG_STRICT_DEVMEM=y
 CONFIG_STRICT_KERNEL_RWX=y
 CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_ST_THERMAL=m

kernel-armv7hl-lpae-debug.config

@@ -492,6 +492,7 @@ CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3004,6 +3005,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 # CONFIG_MESON_GXBB_WATCHDOG is not set
 # CONFIG_MESON_GXL_PHY is not set
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 CONFIG_MESON_WATCHDOG=m
@@ -4286,6 +4288,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QCOM_PM8XXX_XOADC=m
@@ -4459,6 +4462,7 @@ CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4500,6 +4504,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5570,6 +5575,7 @@ CONFIG_STMMAC_PLATFORM=m
 CONFIG_STRICT_DEVMEM=y
 CONFIG_STRICT_KERNEL_RWX=y
 CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUN4I_EMAC=m

kernel-armv7hl-lpae.config

@@ -491,6 +491,7 @@ CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -2984,6 +2985,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 # CONFIG_MESON_GXBB_WATCHDOG is not set
 # CONFIG_MESON_GXL_PHY is not set
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 CONFIG_MESON_WATCHDOG=m
@@ -4264,6 +4266,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QCOM_PM8XXX_XOADC=m
@@ -4437,6 +4440,7 @@ CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4478,6 +4482,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5547,6 +5552,7 @@ CONFIG_STMMAC_PLATFORM=m
 CONFIG_STRICT_DEVMEM=y
 CONFIG_STRICT_KERNEL_RWX=y
 CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUN4I_EMAC=m

kernel-armv7hl.config

@@ -501,6 +501,7 @@ CONFIG_BATMAN_ADV_MCAST=y
 CONFIG_BATMAN_ADV_NC=y
 CONFIG_BATTERY_AXP20X=m
 # CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
+CONFIG_BATTERY_BQ27XXX_HDQ=m
 CONFIG_BATTERY_BQ27XXX_I2C=m
 CONFIG_BATTERY_BQ27XXX=m
 CONFIG_BATTERY_DA9052=m
@@ -512,6 +513,7 @@ CONFIG_BATTERY_DA9052=m
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_RX51=m
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_TWL4030_MADC=m
@@ -2276,6 +2278,7 @@ CONFIG_IMX7_PM_DOMAINS=y
 CONFIG_IMX_DMA=m
 CONFIG_IMX_GPCV2=y
 CONFIG_IMX_IPUV3_CORE=m
+CONFIG_IMX_REMOTEPROC=m
 CONFIG_IMX_SDMA=m
 CONFIG_IMX_THERMAL=m
 CONFIG_IMX_WEIM=y
@@ -3128,6 +3131,7 @@ CONFIG_MEMSTICK_TIFM_MS=m
 CONFIG_MESON_EFUSE=m
 # CONFIG_MESON_GXBB_WATCHDOG is not set
 # CONFIG_MESON_GXL_PHY is not set
+CONFIG_MESON_GX_SOCINFO=y
 CONFIG_MESON_SARADC=m
 CONFIG_MESON_SM=y
 CONFIG_MESON_WATCHDOG=m
@@ -4520,6 +4524,7 @@ CONFIG_QCOM_CLK_SMD_RPM=m
 CONFIG_QCOM_COINCELL=m
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 CONFIG_QCOM_GSBI=m
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
@@ -4725,6 +4730,7 @@ CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RESET_GPIO=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SCI is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
@@ -4767,6 +4773,7 @@ CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 CONFIG_RPMSG=m
 CONFIG_RPMSG_QCOM_GLINK_RPM=m
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPMSG_QCOM_SMD=m
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
@@ -5941,6 +5948,7 @@ CONFIG_ST_REMOTEPROC=m
 CONFIG_STRICT_DEVMEM=y
 CONFIG_STRICT_KERNEL_RWX=y
 CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_ST_THERMAL=m

kernel-i686-PAE.config

@@ -390,6 +390,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_OLPC=y
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
@@ -4040,6 +4041,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4154,6 +4156,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4182,6 +4185,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5177,6 +5181,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-i686-PAEdebug.config

@@ -391,6 +391,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_OLPC=y
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
@@ -4061,6 +4062,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4175,6 +4177,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4203,6 +4206,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5199,6 +5203,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-i686-debug.config

@@ -391,6 +391,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_OLPC=y
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
@@ -4061,6 +4062,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4175,6 +4177,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4203,6 +4206,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5199,6 +5203,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-i686.config

@@ -390,6 +390,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 CONFIG_BATTERY_OLPC=y
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
@@ -4040,6 +4041,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4154,6 +4156,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4182,6 +4185,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5177,6 +5181,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64-debug.config

@@ -339,6 +339,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3875,6 +3876,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3988,6 +3990,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4016,6 +4019,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4985,6 +4989,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64.config

@@ -338,6 +338,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3852,6 +3853,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3965,6 +3967,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3993,6 +3996,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4961,6 +4965,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64le-debug.config

@@ -333,6 +333,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3815,6 +3816,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3928,6 +3930,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3956,6 +3959,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4914,6 +4918,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64le.config

@@ -332,6 +332,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3792,6 +3793,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3905,6 +3907,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3933,6 +3936,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4890,6 +4894,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64p7-debug.config

@@ -333,6 +333,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3814,6 +3815,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3927,6 +3929,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3955,6 +3958,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4913,6 +4917,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-ppc64p7.config

@@ -332,6 +332,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3791,6 +3792,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -3904,6 +3906,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3932,6 +3935,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4889,6 +4893,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-s390x-debug.config

@@ -334,6 +334,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3704,6 +3705,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QDIO=m
@@ -3821,6 +3823,7 @@ CONFIG_RELAY=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 # CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3849,6 +3852,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4810,6 +4814,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-s390x.config

@@ -333,6 +333,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_BATTERY_MAX17042 is not set
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -3681,6 +3682,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QDIO=m
@@ -3798,6 +3800,7 @@ CONFIG_RELAY=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
 # CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -3826,6 +3829,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -4786,6 +4790,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-x86_64-debug.config

@@ -398,6 +398,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 CONFIG_BATTERY_MAX17042=m
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -1087,6 +1088,8 @@ CONFIG_DEV_DAX_PMEM=m
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
 # CONFIG_DEVFREQ_GOV_USERSPACE is not set
 # CONFIG_DEVFREQ_THERMAL is not set
+CONFIG_DEVICE_PRIVATE=y
+CONFIG_DEVICE_PUBLIC=y
 # CONFIG_DEVKMEM is not set
 CONFIG_DEVMEM=y
 CONFIG_DEVPORT=y
@@ -1867,6 +1870,7 @@ CONFIG_HISAX_W6692=y
 CONFIG_HIST_TRIGGERS=y
 # CONFIG_HMC6352 is not set
 # CONFIG_HMC_DRV is not set
+CONFIG_HMM_MIRROR=y
 CONFIG_HOLTEK_FF=y
 # CONFIG_HOSTAP is not set
 CONFIG_HOTPLUG_CPU=y
@@ -4099,6 +4103,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4214,6 +4219,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4242,6 +4248,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5247,6 +5254,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel-x86_64.config

@@ -397,6 +397,7 @@ CONFIG_BATMAN_ADV_NC=y
 # CONFIG_BATTERY_LEGO_EV3 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 CONFIG_BATTERY_MAX17042=m
+CONFIG_BATTERY_MAX1721X=m
 # CONFIG_BATTERY_SBS is not set
 CONFIG_BAYCOM_EPP=m
 CONFIG_BAYCOM_PAR=m
@@ -1077,6 +1078,8 @@ CONFIG_DEV_DAX_PMEM=m
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
 # CONFIG_DEVFREQ_GOV_USERSPACE is not set
 # CONFIG_DEVFREQ_THERMAL is not set
+CONFIG_DEVICE_PRIVATE=y
+CONFIG_DEVICE_PUBLIC=y
 # CONFIG_DEVKMEM is not set
 CONFIG_DEVMEM=y
 CONFIG_DEVPORT=y
@@ -1849,6 +1852,7 @@ CONFIG_HISAX_W6692=y
 CONFIG_HIST_TRIGGERS=y
 # CONFIG_HMC6352 is not set
 # CONFIG_HMC_DRV is not set
+CONFIG_HMM_MIRROR=y
 CONFIG_HOLTEK_FF=y
 # CONFIG_HOSTAP is not set
 CONFIG_HOTPLUG_CPU=y
@@ -4078,6 +4082,7 @@ CONFIG_PWRSEQ_SIMPLE=m
 # CONFIG_QCA7000_SPI is not set
 # CONFIG_QCA7000_UART is not set
 # CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_GLINK_SSR is not set
 # CONFIG_QCOM_HIDMA is not set
 # CONFIG_QCOM_HIDMA_MGMT is not set
 CONFIG_QEDE=m
@@ -4193,6 +4198,7 @@ CONFIG_RELAY=y
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=m
 CONFIG_RESET_ATTACK_MITIGATION=y
+# CONFIG_RESET_HSDK_V1 is not set
 # CONFIG_RESET_TI_SYSCON is not set
 # CONFIG_RFD_FTL is not set
 CONFIG_RFKILL_GPIO=m
@@ -4221,6 +4227,7 @@ CONFIG_ROSE=m
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPR0521=m
 CONFIG_RSI_91X=m
 CONFIG_RSI_DEBUGFS=y
@@ -5225,6 +5232,7 @@ CONFIG_STMMAC_ETH=m
 # CONFIG_STMMAC_PLATFORM is not set
 # CONFIG_STM_SOURCE_CONSOLE is not set
 CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRING_SELFTEST is not set
 CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_STRIP is not set
 CONFIG_SUNDANCE=m

kernel.spec

@@ -69,7 +69,7 @@ Summary: The Linux kernel
 # The rc snapshot level
 %global rcrev 0
 # The git snapshot level
-%define gitrev 3
+%define gitrev 4
 # Set rpm version accordingly
 %define rpmversion 4.%{upstream_sublevel}.0
 %endif
@@ -187,8 +187,10 @@ Summary: The Linux kernel
 # and debuginfo generation. Currently we rely on the old alldebug setting.
 %global _build_id_links alldebug
 
-# kernel PAE is only built on i686 and ARMv7.
+# kernel PAE is only built on ARMv7 in rawhide.
-%ifnarch i686 armv7hl
+# Fedora 27 and earlier still support PAE, so change this on rebases.
+# %ifnarch i686 armv7hl
+%ifnarch armv7hl
 %define with_pae 0
 %endif
 
@@ -605,13 +607,6 @@ Patch310: qcom-msm89xx-fixes.patch
 
 # https://patchwork.kernel.org/patch/9831825/
 # https://patchwork.kernel.org/patch/9833721/
-Patch311: arm-tegra-fix-gpu-iommu.patch
-
-# https://www.spinics.net/lists/linux-arm-msm/msg28203.html
-Patch312: qcom-display-iommu.patch
-
-# https://patchwork.kernel.org/patch/9839803/
-Patch313: qcom-Force-host-mode-for-USB-on-apq8016-sbc.patch
 
 # http://www.spinics.net/lists/dri-devel/msg132235.html
 Patch320: bcm283x-vc4-Fix-OOPSes-from-trying-to-cache-a-partially-constructed-BO..patch
@@ -636,17 +631,10 @@ Patch601: 0001-Input-gpio_keys-Allow-suppression-of-input-events-fo.patch
 Patch602: 0002-Input-soc_button_array-Suppress-power-button-presses.patch
 Patch610: 0010-Input-silead-Add-support-for-capactive-home-button-f.patch
 Patch611: 0011-Input-goodix-Add-support-for-capacitive-home-button.patch
-# These patches are queued for 4.14 and can be dropped on rebase to 4.14-rc1
-Patch603: 0001-power-supply-max17042_battery-Add-support-for-ACPI-e.patch
-Patch604: 0002-power-supply-max17042_battery-Fix-ACPI-interrupt-iss.patch
-Patch615: 0015-i2c-cht-wc-Add-Intel-Cherry-Trail-Whiskey-Cove-SMBUS.patch
 
 # rhbz 1476467
 Patch617: Fix-for-module-sig-verification.patch
 
-# rhbz 1485086
-Patch619: pci-mark-amd-stoney-gpu-ats-as-broken.patch
-
 # END OF PATCH DEFINITIONS
 
 %endif
@@ -2201,6 +2189,9 @@ fi
 #
 #
 %changelog
+* Mon Sep 11 2017 Justin M. Forbes <jforbes@fedoraproject.org> - 4.14.0-0.rc0.git4.1
+- Linux v4.13-11197-gf007cad159e9
+
 * Sat Sep  9 2017 Peter Robinson <pbrobinson@fedoraproject.org>
 - Only build ParPort support on x86
 

pci-mark-amd-stoney-gpu-ats-as-broken.patch

@@ -1,47 +0,0 @@
-From 9b44b0b09decfbe388131a345ba780c57240a7a9 Mon Sep 17 00:00:00 2001
-From: Joerg Roedel <jroedel@suse.de>
-Date: Tue, 11 Jul 2017 15:48:00 -0500
-Subject: PCI: Mark AMD Stoney GPU ATS as broken
-
-ATS is broken on this hardware and causes IOMMU stalls and system failure.
-Disable ATS on these devices to make them usable again with IOMMU enabled.
-
-Note that the commit in the Fixes tag is not buggy; it just uncovers the
-problem in the hardware by increasing the ATS flush rate.
-
-Link: https://lists.linuxfoundation.org/pipermail/iommu/2017-March/020836.html
-Link: https://bugzilla.redhat.com/show_bug.cgi?id=1409201
-Fixes: b1516a14657a ("iommu/amd: Implement flush queue")
-Signed-off-by: Joerg Roedel <jroedel@suse.de>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Alex Deucher <alexander.deucher@amd.com>
----
- drivers/pci/quirks.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
-index 6967c6b..15ee4e9 100644
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -4681,3 +4681,18 @@ static void quirk_intel_no_flr(struct pci_dev *dev)
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr);
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr);
-+
-+#ifdef CONFIG_PCI_ATS
-+/*
-+ * Some devices have a broken ATS implementation causing IOMMU stalls.
-+ * Don't use ATS for those devices.
-+ */
-+static void quirk_no_ats(struct pci_dev *pdev)
-+{
-+	dev_info(&pdev->dev, "disabling ATS (broken on this device)\n");
-+	pdev->ats_cap = 0;
-+}
-+
-+/* AMD Stoney platform GPU */
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_no_ats);
-+#endif /* CONFIG_PCI_ATS */
--- 
-cgit v1.1
-

qcom-Force-host-mode-for-USB-on-apq8016-sbc.patch

@@ -1,93 +0,0 @@
-From patchwork Fri Jul 14 02:20:42 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2] arm64: dts: qcom: Force host mode for USB on apq8016-sbc
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 9839803
-Message-Id: <20170714022042.13886-1-sboyd@codeaurora.org>
-To: Andy Gross <andy.gross@linaro.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
- linux-arm-kernel@lists.infradead.org, Rob Clark <robdclark@gmail.com>
-Date: Thu, 13 Jul 2017 19:20:42 -0700
-
-Commit ed75d6a96905 ("arm64: dts: qcom: Collapse usb support into
-one node") breaks host mode support on apq8016-sbc boards. This
-is because the mux driver (tc7usb40mu) hasn't been merged.
-Without that driver, we can't toggle the GPIO going to the mux to
-route out the D+/D- lines to the USB hub that's on the board.
-
-One solution would be to totally revert this change, but that
-opens us up to other problems when two USB drivers are operating
-the same hardware block at the same time. Let's modify the DT so
-that the USB controller is always in host mode and connected to
-the hub so that things like USB keyboards and mouses work. This
-is the mode that most people prefer anyway with these devices. We
-also delete the usb-switch node because the binding was never
-accepted upstream.
-
-In the future, we can add muxing support and then update the DT
-to support both modes at runtime. Patches to support this are
-already on the mailing list.
-
-Fixes: ed75d6a96905 ("arm64: dts: qcom: Collapse usb support into one node")
-Reported-by: Rob Clark <robdclark@gmail.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
-
-I noticed that I accidently removed the vbus notifier part of the phy.
-Without it, we'll change settings that shouldn't changed. The thing
-that we don't have is the ID pin on this board, not the vbus. That's
-the only difference from v1.
-
- arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi |  1 +
- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi           | 13 ++++---------
- 2 files changed, 5 insertions(+), 9 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
-index d94640812194..790b7775b901 100644
---- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
-+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
-@@ -17,6 +17,7 @@
- 			function = PMIC_GPIO_FUNC_NORMAL;
- 			power-source = <PM8916_GPIO_VPH>;
- 			input-disable;
-+			output-high;
- 		};
- 	};
- 
-diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
-index bd310ac1967a..bb9e29e6b164 100644
---- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
-+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
-@@ -213,11 +213,14 @@
- 		};
- 
- 		usb@78d9000 {
--			extcon = <&usb_id>, <&usb_id>;
-+			extcon = <&usb_id>;
- 			status = "okay";
- 			adp-disable;
- 			hnp-disable;
- 			srp-disable;
-+			dr_mode = "host";
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&usb_sw_sel_pm>;
- 			ulpi {
- 				phy {
- 					v1p8-supply = <&pm8916_l7>;
-@@ -342,14 +345,6 @@
- 		pinctrl-0 = <&usb_id_default>;
- 	};
- 
--	usb-switch {
--		compatible = "toshiba,tc7usb40mu";
--		switch-gpios = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
--		extcon = <&usb_id>;
--		pinctrl-names = "default";
--		pinctrl-0 = <&usb_sw_sel_pm>;
--	};
--
- 	hdmi-out {
- 		compatible = "hdmi-connector";
- 		type = "a";

qcom-msm89xx-fixes.patch

@@ -1,81 +1,3 @@
-From 283d0e00a18b294ec56f1fb904896a546704faaf Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Fri, 30 Jun 2017 11:47:21 -0400
-Subject: [PATCH 3/6] soc: qcom: smsm: fix of_node refcnting problem
-
-of_find_node_with_property() drops the reference to the 'from' node,
-which eventually (after enough -EPROBE_DEFERs) drops the last reference
-to the node causing all sorts of fun problems, and this nice splat.
-
-  BUG: sleeping function called from invalid context at ../kernel/locking/mutex.c:747
-  in_atomic(): 1, irqs_disabled(): 128, pid: 33, name: kworker/0:1
-  4 locks held by kworker/0:1/33:
-   #0:  ("events"){.+.+.+}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728
-   #1:  (deferred_probe_work){+.+.+.}, at: [<ffff0000080fa91c>] process_one_work+0x1a4/0x728
-   #2:  (&dev->mutex){......}, at: [<ffff000008676078>] __device_attach+0x30/0x168
-   #3:  (devtree_lock){......}, at: [<ffff000008828fd0>] of_find_node_with_property+0x30/0xe0
-  irq event stamp: 18976
-  hardirqs last  enabled at (18975): [<ffff00000815794c>] __down_trylock_console_sem+0x74/0xb8
-  hardirqs last disabled at (18976): [<ffff0000089e26d4>] _raw_spin_lock_irqsave+0x2c/0x78
-  softirqs last  enabled at (16880): [<ffff0000080e0f00>] __do_softirq+0x580/0x640
-  softirqs last disabled at (16871): [<ffff0000080e13a4>] irq_exit+0xe4/0x138
-  CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G            E   4.12.0-rc5+ #1455
-  Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017
-  Workqueue: events deferred_probe_work_func
-  Call trace:
-  [<ffff000008089ee0>] dump_backtrace+0x0/0x230
-  [<ffff00000808a134>] show_stack+0x24/0x30
-  [<ffff0000084e1944>] dump_stack+0xac/0xe8
-  [<ffff00000810d7e0>] ___might_sleep+0x150/0x230
-  [<ffff00000810d918>] __might_sleep+0x58/0x90
-  [<ffff0000089dde18>] __mutex_lock+0x50/0x870
-  [<ffff0000089de674>] mutex_lock_nested+0x3c/0x50
-  [<ffff000008388ae0>] kernfs_remove+0x30/0x50
-  [<ffff00000838b720>] sysfs_remove_dir+0x58/0x70
-  [<ffff0000084e393c>] kobject_del+0x1c/0x58
-  [<ffff0000084e374c>] kobject_put+0xb4/0x208
-  [<ffff00000882c364>] of_node_put+0x24/0x30
-  [<ffff000008829018>] of_find_node_with_property+0x78/0xe0
-  [<ffff000000aff5f4>] qcom_smsm_probe+0x194/0x720 [smsm]
-  [<ffff0000086793b4>] platform_drv_probe+0x74/0x110
-  [<ffff0000086765bc>] driver_probe_device+0x2b4/0x420
-  [<ffff000008676920>] __device_attach_driver+0xd0/0x150
-  [<ffff000008673e78>] bus_for_each_drv+0x68/0xa8
-  [<ffff00000867611c>] __device_attach+0xd4/0x168
-  [<ffff000008676a1c>] device_initial_probe+0x24/0x30
-  [<ffff000008675380>] bus_probe_device+0xa0/0xa8
-  [<ffff000008675948>] deferred_probe_work_func+0xb8/0xf8
-  [<ffff0000080fa9d4>] process_one_work+0x25c/0x728
-  [<ffff0000080faef4>] worker_thread+0x54/0x3d8
-  [<ffff0000081031d8>] kthread+0x110/0x140
-  [<ffff000008082d90>] ret_from_fork+0x10/0x40
-  OF: ERROR: Bad of_node_put() on /smsm
-  CPU: 0 PID: 33 Comm: kworker/0:1 Tainted: G        W   E   4.12.0-rc5+ #1455
-  Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc1-00234-g22fa70a-dirty 06/26/2017
-  Workqueue: events deferred_probe_work_func
-
-Signed-off-by: Rob Clark <robdclark@gmail.com>
----
- drivers/soc/qcom/smsm.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c
-index d0337b2a71c8..a64ecd597a22 100644
---- a/drivers/soc/qcom/smsm.c
-+++ b/drivers/soc/qcom/smsm.c
-@@ -495,7 +495,8 @@ static int qcom_smsm_probe(struct platform_device *pdev)
- 	if (!smsm->hosts)
- 		return -ENOMEM;
- 
--	local_node = of_find_node_with_property(pdev->dev.of_node, "#qcom,smem-state-cells");
-+	local_node = of_find_node_with_property(of_node_get(pdev->dev.of_node),
-+						"#qcom,smem-state-cells");
- 	if (!local_node) {
- 		dev_err(&pdev->dev, "no state entry\n");
- 		return -EINVAL;
--- 
-2.13.0
-
 From 40cb129048e5d2456da8d9d6468f292da3071b91 Mon Sep 17 00:00:00 2001
 From: Rob Clark <robdclark@gmail.com>
 Date: Fri, 30 Jun 2017 16:40:23 -0400
@@ -107,32 +29,3 @@ index b1449ad67fc0..22ad37c9808c 100644
  
 -- 
 2.13.0
-
-From ae9b4fa55748cc9ce3c8ac039e46feab7257eff9 Mon Sep 17 00:00:00 2001
-From: Rob Clark <robdclark@gmail.com>
-Date: Sun, 2 Jul 2017 09:23:36 -0400
-Subject: [PATCH 5/6] soc: qcom: wcnss_ctrl: add missing MODULE_DEVICE_TABLE()
-
-This fixes a problem of wifi module not loading on db410c.
-
-Signed-off-by: Rob Clark <robdclark@gmail.com>
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- drivers/soc/qcom/wcnss_ctrl.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
-index b9069184df19..d008e5b82db4 100644
---- a/drivers/soc/qcom/wcnss_ctrl.c
-+++ b/drivers/soc/qcom/wcnss_ctrl.c
-@@ -347,6 +347,7 @@ static const struct of_device_id wcnss_ctrl_of_match[] = {
- 	{ .compatible = "qcom,wcnss", },
- 	{}
- };
-+MODULE_DEVICE_TABLE(of, wcnss_ctrl_of_match);
- 
- static struct rpmsg_driver wcnss_ctrl_driver = {
- 	.probe = wcnss_ctrl_probe,
--- 
-2.13.0
-

sources

@@ -1,3 +1,3 @@
 SHA512 (linux-4.13.tar.xz) = a557c2f0303ae618910b7106ff63d9978afddf470f03cb72aa748213e099a0ecd5f3119aea6cbd7b61df30ca6ef3ec57044d524b7babbaabddf8b08b8bafa7d2
 SHA512 (perf-man-4.13.tar.gz) = 9bcc2cd8e56ec583ed2d8e0b0c88e7a94035a1915e40b3177bb02d6c0f10ddd4df9b097b1f5af59efc624226b613e240ddba8ddc2156f3682f992d5455fc5c03
-SHA512 (patch-4.13-git3.xz) = ca51994da2a499037f331d554450ace9409c62ac799f1296775ec2466d22660927b9299a65657e8843ee452626cc7da85c691570308c10e847a5a6632ad30a99
+SHA512 (patch-4.13-git4.xz) = 7047893f6d929a03c0ed7c40286c349442d4ec3039876d90750e3f27e4b29413869cb379b8b6e4ec98dc4e41258fdea231c0650fa24a632a715507e979e141cb