Linux v4.18-rc3-107-gd0fbad0aec1d

bcm2837-lan78xx-fixes.patch

@@ -1,88 +0,0 @@
-From bce4fe9fa48df0cbbe842e80d9a520f7265b4cd4 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Wed, 4 Apr 2018 16:34:24 +0100
-Subject: [PATCH 5/9] net: lan78xx: Allow for VLAN headers in timeout.
-
-The frame abort timeout being set by lan78xx_set_rx_max_frame_length
-didn't account for any VLAN headers, resulting in very low
-throughput if used with tagged VLANs.
-Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this.
-
-See https://github.com/raspberrypi/linux/issues/2458
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- drivers/net/usb/lan78xx.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
-index 0867f7275852..5b46998a6dce 100644
---- a/drivers/net/usb/lan78xx.c
-+++ b/drivers/net/usb/lan78xx.c
-@@ -2178,7 +2178,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
- 	if ((ll_mtu % dev->maxpacket) == 0)
- 		return -EDOM;
- 
--	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
-+	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
- 
- 	netdev->mtu = new_mtu;
- 
-@@ -2467,7 +2467,8 @@ static int lan78xx_reset(struct lan78xx_net *dev)
- 	buf |= FCT_TX_CTL_EN_;
- 	ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf);
- 
--	ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
-+	ret = lan78xx_set_rx_max_frame_length(dev,
-+					      dev->net->mtu + VLAN_ETH_HLEN);
- 
- 	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
- 	buf |= MAC_RX_RXEN_;
--- 
-2.17.0
-
-From 6fecd97fd35e9c624d101495ca34c83b1cb23e3d Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Mon, 9 Apr 2018 14:31:54 +0100
-Subject: [PATCH 6/9] net: lan78xx: Request s/w csum check on VLAN tagged
- packets.
-
-There appears to be some issue in the LAN78xx where the checksum
-computed on a VLAN tagged packet is incorrect, or at least not
-in the form that the kernel is after. This is most easily shown
-by pinging a device via a VLAN tagged interface and it will dump
-out the error message and stack trace from netdev_rx_csum_fault.
-It has also been seen with standard TCP and UDP packets.
-
-Until this is fully understood, request that the network stack
-computes the checksum on packets signalled as having a VLAN tag
-applied.
-
-See https://github.com/raspberrypi/linux/issues/2458
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- drivers/net/usb/lan78xx.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
-index 5b46998a6dce..6b61bb21f2ae 100644
---- a/drivers/net/usb/lan78xx.c
-+++ b/drivers/net/usb/lan78xx.c
-@@ -2920,8 +2920,12 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev,
- 				    struct sk_buff *skb,
- 				    u32 rx_cmd_a, u32 rx_cmd_b)
- {
-+	/* Checksum offload appears to be flawed if used with VLANs.
-+	 * Elect for sw checksum check instead.
-+	 */
- 	if (!(dev->net->features & NETIF_F_RXCSUM) ||
--	    unlikely(rx_cmd_a & RX_CMD_A_ICSM_)) {
-+	    unlikely(rx_cmd_a & RX_CMD_A_ICSM_) ||
-+	    (rx_cmd_a & RX_CMD_A_FVTG_)) {
- 		skb->ip_summed = CHECKSUM_NONE;
- 	} else {
- 		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_));
--- 
-2.17.0
-

gitrev

@@ -1 +1 @@
-cd993fc4316d5268f42ab991e9a2c8a6e6cd8dc1
+d0fbad0aec1df29717fab736eb24c8a49cf2c70b

kernel.spec

@@ -69,7 +69,7 @@ Summary: The Linux kernel
 # The rc snapshot level
 %global rcrev 3
 # The git snapshot level
-%define gitrev 0
+%define gitrev 1
 # Set rpm version accordingly
 %define rpmversion 4.%{upstream_sublevel}.0
 %endif
@@ -586,7 +586,6 @@ Patch307: arm-tegra-fix-nouveau-crash.patch
 
 # Enabling Patches for the RPi3+
 Patch330: bcm2837-enable-pmu.patch
-Patch331: bcm2837-lan78xx-fixes.patch
 
 Patch332: bcm2835-cpufreq-add-CPU-frequency-control-driver.patch
 
@@ -1838,6 +1837,9 @@ fi
 #
 #
 %changelog
+* Tue Jul 03 2018 Laura Abbott <labbott@redhat.com> - 4.18.0-0.rc3.git1.1
+- Linux v4.18-rc3-107-gd0fbad0aec1d
+
 * Tue Jul 03 2018 Laura Abbott <labbott@redhat.com>
 - Reenable debugging options.
 

sources

@@ -1,2 +1,3 @@
 SHA512 (linux-4.17.tar.xz) = 4d9de340a26155a89ea8773131c76220cc2057f2b5d031b467b60e8b14c1842518e2d60a863d8c695f0f7640f3f18d43826201984a238dade857b6cef79837db
 SHA512 (patch-4.18-rc3.xz) = 9c6cb28585e1fa9e7b41a83314040c6b74fdb20c9a69041de9879412c92926f71aaac2c76f4f59c0ad25f06a2431ffa2fd2bd44c6413e7bb6ab078b90fa87f9d
+SHA512 (patch-4.18-rc3-git1.xz) = 4e8ab5b42d32b848dc591e27cf2bf52abaf5e0452e39c7fa40d359ebf1b9092c6ea49df7d053fde71a555beab0275f17fe22e4e86b30142546e1dcc2b38e7555