rpms/kernel
9
2
Fork 4
Code Issues Pull Requests Releases Activity

Update patches for 8139cp issues from David Woodhouse (rhbz 851278)

Browse Source
This commit is contained in:
Josh Boyer 2012-11-27 14:01:21 -05:00
parent 739840a505
commit 0970aa2a81
4 changed files with 202 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
8139cp-re-enable-interrupts-after-tx-timeout.patch Normal file
View File

@ -0,0 +1,29 @@
From 01ffc0a7f1c1801a2354719dedbc32aff45b987d Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Sat, 24 Nov 2012 12:11:21 +0000
Subject: [PATCH] 8139cp: re-enable interrupts after tx timeout
Recovery doesn't work too well if we leave interrupts disabled...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/realtek/8139cp.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 3de318d..6cb96b4 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -1219,6 +1219,7 @@ static void cp_tx_timeout(struct net_device *dev)
cp_clean_rings(cp);
rc = cp_init_rings(cp);
cp_start_hw(cp);
+ cp_enable_irq(cp);
netif_wake_queue(dev);
--
1.7.6.5

100
8139cp-set-ring-address-after-enabling-C-mode.patch Normal file
View File

@ -0,0 +1,100 @@
From a9dbe40fc10cea2efe6e1ff9e03c62dd7579c5ba Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 21 Nov 2012 10:27:19 +0000
Subject: [PATCH] 8139cp: set ring address after enabling C+ mode
This fixes (for me) a regression introduced by commit b01af457 ("8139cp:
set ring address before enabling receiver"). That commit configured the
descriptor ring addresses earlier in the initialisation sequence, in
order to avoid the possibility of triggering stray DMA before the
correct address had been set up.
Unfortunately, it seems that the hardware will scribble garbage into the
TxRingAddr registers when we enable "plus mode" Tx in the CpCmd
register. Observed on a Traverse Geos router board.
To deal with this, while not reintroducing the problem which led to the
original commit, we augment cp_start_hw() to write to the CpCmd register
*first*, then set the descriptor ring addresses, and then finally to
enable Rx and Tx in the original 8139 Cmd register. The datasheet
actually indicates that we should enable Tx/Rx in the Cmd register
*before* configuring the descriptor addresses, but that would appear to
re-introduce the problem that the offending commit b01af457 was trying
to solve. And this variant appears to work fine on real hardware.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org [3.5+]
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/realtek/8139cp.c | 40 +++++++++++++++++++++++----------
1 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index 1c81825..5166d94 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -957,7 +957,35 @@ static void cp_reset_hw (struct cp_private *cp)
static inline void cp_start_hw (struct cp_private *cp)
{
+ dma_addr_t ring_dma;
+
cpw16(CpCmd, cp->cpcmd);
+
+ /*
+ * These (at least TxRingAddr) need to be configured after the
+ * corresponding bits in CpCmd are enabled. Datasheet v1.6 §6.33
+ * (C+ Command Register) recommends that these and more be configured
+ * *after* the [RT]xEnable bits in CpCmd are set. And on some hardware
+ * it's been observed that the TxRingAddr is actually reset to garbage
+ * when C+ mode Tx is enabled in CpCmd.
+ */
+ cpw32_f(HiTxRingAddr, 0);
+ cpw32_f(HiTxRingAddr + 4, 0);
+
+ ring_dma = cp->ring_dma;
+ cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+ ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
+ cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+ /*
+ * Strictly speaking, the datasheet says this should be enabled
+ * *before* setting the descriptor addresses. But what, then, would
+ * prevent it from doing DMA to random unconfigured addresses?
+ * This variant appears to work fine.
+ */
cpw8(Cmd, RxOn | TxOn);
}
@@ -969,7 +997,6 @@ static void cp_enable_irq(struct cp_private *cp)
static void cp_init_hw (struct cp_private *cp)
{
struct net_device *dev = cp->dev;
- dma_addr_t ring_dma;
cp_reset_hw(cp);
@@ -979,17 +1006,6 @@ static void cp_init_hw (struct cp_private *cp)
cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
- cpw32_f(HiTxRingAddr, 0);
- cpw32_f(HiTxRingAddr + 4, 0);
-
- ring_dma = cp->ring_dma;
- cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
-
- ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
- cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
-
cp_start_hw(cp);
cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
--
1.7.6.5

59
Revert-8139cp-revert-set-ring-address-before-enabling.patch Normal file
View File

@ -0,0 +1,59 @@
From 071e3ef4a94a021b16a2912f3885c86f4ff36b49 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 25 Nov 2012 15:52:09 -0500
Subject: [PATCH] Revert "8139cp: revert "set ring address before enabling
receiver""
This reverts commit b26623dab7eeb1e9f5898c7a49458789dd492f20.
This reverts the revert, in net-next we'll try another scheme
to fix this bug using patches from David Woodhouse.
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/ethernet/realtek/8139cp.c | 22 +++++++++++-----------
1 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
index b01f83a..1c81825 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -979,6 +979,17 @@ static void cp_init_hw (struct cp_private *cp)
cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
+ cpw32_f(HiTxRingAddr, 0);
+ cpw32_f(HiTxRingAddr + 4, 0);
+
+ ring_dma = cp->ring_dma;
+ cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
+
+ ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
+ cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
+ cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
+
cp_start_hw(cp);
cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
@@ -992,17 +1003,6 @@ static void cp_init_hw (struct cp_private *cp)
cpw8(Config5, cpr8(Config5) & PMEStatus);
- cpw32_f(HiTxRingAddr, 0);
- cpw32_f(HiTxRingAddr + 4, 0);
-
- ring_dma = cp->ring_dma;
- cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
-
- ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
- cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
- cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
-
cpw16(MultiIntr, 0);
cpw8_f(Cfg9346, Cfg9346_Lock);
--
1.7.6.5

15
kernel.spec
View File

@ -62,7 +62,7 @@ Summary: The Linux kernel
# For non-released -rc kernels, this will be appended after the rcX and
# gitX tags, so a 3 here would become part of release "0.rcX.gitX.3"
#
%global baserelease 1
%global baserelease 2
%global fedora_build %{baserelease}
# base_sublevel is the kernel version we're starting with and patching
@ -773,6 +773,11 @@ Patch21226: vt-Drop-K_OFF-for-VC_MUTE.patch
Patch21228: exec-do-not-leave-bprm-interp-on-stack.patch
Patch21229: exec-use-eloop-for-max-recursion-depth.patch
#rhbz 851278
Patch21234: Revert-8139cp-revert-set-ring-address-before-enabling.patch
Patch21232: 8139cp-set-ring-address-after-enabling-C-mode.patch
Patch21233: 8139cp-re-enable-interrupts-after-tx-timeout.patch
# END OF PATCH DEFINITIONS
%endif
@ -1489,6 +1494,11 @@ ApplyPatch vt-Drop-K_OFF-for-VC_MUTE.patch
ApplyPatch exec-do-not-leave-bprm-interp-on-stack.patch
ApplyPatch exec-use-eloop-for-max-recursion-depth.patch
#rhbz 851278
ApplyPatch Revert-8139cp-revert-set-ring-address-before-enabling.patch
ApplyPatch 8139cp-set-ring-address-after-enabling-C-mode.patch
ApplyPatch 8139cp-re-enable-interrupts-after-tx-timeout.patch
# END OF PATCH APPLICATIONS
%endif
@ -2356,6 +2366,9 @@ fi
# ||----w |
# || ||
%changelog
* Tue Nov 27 2012 Josh Boyer <jwboyer@redhat.com>
- Update patches for 8139cp issues from David Woodhouse (rhbz 851278)
* Tue Nov 27 2012 Josh Boyer <jwboyer@redhat.com> - 3.7.0-0.rc7.git1.1
- Linux v3.7-rc7-25-g2844a48
- Reenable debugging options.