Fix USB on Raspberry Pi (and possibly other dwc2 devices
This commit is contained in:
parent
7bea88339b
commit
0878a20964
@ -1,301 +0,0 @@
|
||||
From patchwork Mon Oct 9 12:00:51 2017
|
||||
Content-Type: text/plain; charset="utf-8"
|
||||
MIME-Version: 1.0
|
||||
Content-Transfer-Encoding: 7bit
|
||||
Subject: [PATCHv4,
|
||||
2/2] phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800
|
||||
From: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
|
||||
X-Patchwork-Id: 9992809
|
||||
Message-Id: <1507550451-21324-3-git-send-email-andrzej.p@samsung.com>
|
||||
To: linux-samsung-soc@vger.kernel.org, linux-usb@vger.kernel.org,
|
||||
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
|
||||
Cc: Mark Rutland <mark.rutland@arm.com>, Felipe Balbi <balbi@kernel.org>,
|
||||
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
|
||||
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
|
||||
Russell King <linux@armlinux.org.uk>,
|
||||
Krzysztof Kozlowski <krzk@kernel.org>,
|
||||
Kishon Vijay Abraham I <kishon@ti.com>,
|
||||
Rob Herring <robh+dt@kernel.org>, Kukjin Kim <kgene@kernel.org>,
|
||||
Andrzej Pietrasiewicz <andrzej.p@samsung.com>,
|
||||
Marek Szyprowski <m.szyprowski@samsung.com>
|
||||
Date: Mon, 09 Oct 2017 14:00:51 +0200
|
||||
|
||||
From: Vivek Gautam <gautam.vivek@samsung.com>
|
||||
|
||||
Adding phy calibration sequence for USB 3.0 DRD PHY present on
|
||||
Exynos5420/5800 systems.
|
||||
This calibration facilitates setting certain PHY parameters viz.
|
||||
the Loss-of-Signal (LOS) Detector Threshold Level, as well as
|
||||
Tx-Vboost-Level for Super-Speed operations.
|
||||
Additionally we also set proper time to wait for RxDetect measurement,
|
||||
for desired PHY reference clock, so as to solve issue with enumeration
|
||||
of few USB 3.0 devices, like Samsung SUM-TSB16S 3.0 USB drive
|
||||
on the controller.
|
||||
|
||||
We are using CR_port for this purpose to send required data
|
||||
to override the LOS values.
|
||||
|
||||
On testing with USB 3.0 devices on USB 3.0 port present on
|
||||
SMDK5420, and peach-pit boards should see following message:
|
||||
usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
|
||||
|
||||
and without this patch, should see below shown message:
|
||||
usb 1-1: new high-speed USB device number 2 using xhci-hcd
|
||||
|
||||
[Also removed unnecessary extra lines in the register macro definitions]
|
||||
|
||||
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
|
||||
[adapted to use phy_calibrate as entry point]
|
||||
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
|
||||
---
|
||||
drivers/phy/samsung/phy-exynos5-usbdrd.c | 183 +++++++++++++++++++++++++++++++
|
||||
drivers/usb/dwc3/core.c | 7 +-
|
||||
2 files changed, 188 insertions(+), 2 deletions(-)
|
||||
|
||||
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
|
||||
index 22c68f5..9e83c15 100644
|
||||
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
|
||||
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
|
||||
@@ -90,7 +90,17 @@
|
||||
#define PHYCLKRST_COMMONONN BIT(0)
|
||||
|
||||
#define EXYNOS5_DRD_PHYREG0 0x14
|
||||
+#define PHYREG0_SSC_REF_CLK_SEL BIT(21)
|
||||
+#define PHYREG0_SSC_RANGE BIT(20)
|
||||
+#define PHYREG0_CR_WRITE BIT(19)
|
||||
+#define PHYREG0_CR_READ BIT(18)
|
||||
+#define PHYREG0_CR_DATA_IN(_x) ((_x) << 2)
|
||||
+#define PHYREG0_CR_CAP_DATA BIT(1)
|
||||
+#define PHYREG0_CR_CAP_ADDR BIT(0)
|
||||
+
|
||||
#define EXYNOS5_DRD_PHYREG1 0x18
|
||||
+#define PHYREG1_CR_DATA_OUT(_x) ((_x) << 1)
|
||||
+#define PHYREG1_CR_ACK BIT(0)
|
||||
|
||||
#define EXYNOS5_DRD_PHYPARAM0 0x1c
|
||||
|
||||
@@ -119,6 +129,25 @@
|
||||
#define EXYNOS5_DRD_PHYRESUME 0x34
|
||||
#define EXYNOS5_DRD_LINKPORT 0x44
|
||||
|
||||
+/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */
|
||||
+#define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15)
|
||||
+#define LOSLEVEL_OVRD_IN_LOS_BIAS_5420 (0x5 << 13)
|
||||
+#define LOSLEVEL_OVRD_IN_LOS_BIAS_DEFAULT (0x0 << 13)
|
||||
+#define LOSLEVEL_OVRD_IN_EN (0x1 << 10)
|
||||
+#define LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT (0x9 << 0)
|
||||
+
|
||||
+#define EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN (0x12)
|
||||
+#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420 (0x5 << 13)
|
||||
+#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_DEFAULT (0x4 << 13)
|
||||
+
|
||||
+#define EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG (0x1010)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M (0x4 << 4)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M (0x8 << 4)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_25M_26M (0x8 << 4)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M (0x20 << 4)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4)
|
||||
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4)
|
||||
+
|
||||
#define KHZ 1000
|
||||
#define MHZ (KHZ * KHZ)
|
||||
|
||||
@@ -527,6 +556,151 @@ static int exynos5_usbdrd_phy_power_off(struct phy *phy)
|
||||
return 0;
|
||||
}
|
||||
|
||||
+static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd,
|
||||
+ u32 val, u32 cmd)
|
||||
+{
|
||||
+ u32 usec = 100;
|
||||
+ unsigned int result;
|
||||
+
|
||||
+ writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
|
||||
+
|
||||
+ do {
|
||||
+ result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
|
||||
+ if (result & PHYREG1_CR_ACK)
|
||||
+ break;
|
||||
+
|
||||
+ udelay(1);
|
||||
+ } while (usec-- > 0);
|
||||
+
|
||||
+ if (!usec) {
|
||||
+ dev_err(phy_drd->dev,
|
||||
+ "CRPORT handshake timeout1 (0x%08x)\n", val);
|
||||
+ return -ETIME;
|
||||
+ }
|
||||
+
|
||||
+ usec = 100;
|
||||
+
|
||||
+ writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
|
||||
+
|
||||
+ do {
|
||||
+ result = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1);
|
||||
+ if (!(result & PHYREG1_CR_ACK))
|
||||
+ break;
|
||||
+
|
||||
+ udelay(1);
|
||||
+ } while (usec-- > 0);
|
||||
+
|
||||
+ if (!usec) {
|
||||
+ dev_err(phy_drd->dev,
|
||||
+ "CRPORT handshake timeout2 (0x%08x)\n", val);
|
||||
+ return -ETIME;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd,
|
||||
+ u32 addr, u32 data)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ /* Write Address */
|
||||
+ writel(PHYREG0_CR_DATA_IN(addr),
|
||||
+ phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
|
||||
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr),
|
||||
+ PHYREG0_CR_CAP_ADDR);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ /* Write Data */
|
||||
+ writel(PHYREG0_CR_DATA_IN(data),
|
||||
+ phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
|
||||
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
|
||||
+ PHYREG0_CR_CAP_DATA);
|
||||
+ if (ret)
|
||||
+ return ret;
|
||||
+
|
||||
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
|
||||
+ PHYREG0_CR_WRITE);
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
+/*
|
||||
+ * Calibrate few PHY parameters using CR_PORT register to meet
|
||||
+ * SuperSpeed requirements on Exynos5420 and Exynos5800 systems,
|
||||
+ * which have 28nm USB 3.0 DRD PHY.
|
||||
+ */
|
||||
+static int exynos5420_usbdrd_phy_calibrate(struct exynos5_usbdrd_phy *phy_drd)
|
||||
+{
|
||||
+ unsigned int temp;
|
||||
+ int ret = 0;
|
||||
+
|
||||
+ /*
|
||||
+ * Change los_bias to (0x5) for 28nm PHY from a
|
||||
+ * default value (0x0); los_level is set as default
|
||||
+ * (0x9) as also reflected in los_level[30:26] bits
|
||||
+ * of PHYPARAM0 register.
|
||||
+ */
|
||||
+ temp = LOSLEVEL_OVRD_IN_LOS_BIAS_5420 |
|
||||
+ LOSLEVEL_OVRD_IN_EN |
|
||||
+ LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT;
|
||||
+ ret = crport_ctrl_write(phy_drd,
|
||||
+ EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN,
|
||||
+ temp);
|
||||
+ if (ret) {
|
||||
+ dev_err(phy_drd->dev,
|
||||
+ "Failed setting Loss-of-Signal level for SuperSpeed\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Set tx_vboost_lvl to (0x5) for 28nm PHY Tuning,
|
||||
+ * to raise Tx signal level from its default value of (0x4)
|
||||
+ */
|
||||
+ temp = TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420;
|
||||
+ ret = crport_ctrl_write(phy_drd,
|
||||
+ EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN,
|
||||
+ temp);
|
||||
+ if (ret) {
|
||||
+ dev_err(phy_drd->dev,
|
||||
+ "Failed setting Tx-Vboost-Level for SuperSpeed\n");
|
||||
+ return ret;
|
||||
+ }
|
||||
+
|
||||
+ /*
|
||||
+ * Set proper time to wait for RxDetect measurement, for
|
||||
+ * desired reference clock of PHY, by tuning the CR_PORT
|
||||
+ * register LANE0.TX_DEBUG which is internal to PHY.
|
||||
+ * This fixes issue with few USB 3.0 devices, which are
|
||||
+ * not detected (not even generate interrupts on the bus
|
||||
+ * on insertion) without this change.
|
||||
+ * e.g. Samsung SUM-TSB16S 3.0 USB drive.
|
||||
+ */
|
||||
+ switch (phy_drd->extrefclk) {
|
||||
+ case EXYNOS5_FSEL_50MHZ:
|
||||
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M;
|
||||
+ break;
|
||||
+ case EXYNOS5_FSEL_20MHZ:
|
||||
+ case EXYNOS5_FSEL_19MHZ2:
|
||||
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M;
|
||||
+ break;
|
||||
+ case EXYNOS5_FSEL_24MHZ:
|
||||
+ default:
|
||||
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M;
|
||||
+ break;
|
||||
+ }
|
||||
+
|
||||
+ ret = crport_ctrl_write(phy_drd,
|
||||
+ EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG,
|
||||
+ temp);
|
||||
+ if (ret)
|
||||
+ dev_err(phy_drd->dev,
|
||||
+ "Failed setting RxDetect measurement time for SuperSpeed\n");
|
||||
+
|
||||
+ return ret;
|
||||
+}
|
||||
+
|
||||
static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
|
||||
struct of_phandle_args *args)
|
||||
{
|
||||
@@ -538,11 +712,20 @@ static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
|
||||
return phy_drd->phys[args->args[0]].phy;
|
||||
}
|
||||
|
||||
+static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
|
||||
+{
|
||||
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
|
||||
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
|
||||
+
|
||||
+ return exynos5420_usbdrd_phy_calibrate(phy_drd);
|
||||
+}
|
||||
+
|
||||
static const struct phy_ops exynos5_usbdrd_phy_ops = {
|
||||
.init = exynos5_usbdrd_phy_init,
|
||||
.exit = exynos5_usbdrd_phy_exit,
|
||||
.power_on = exynos5_usbdrd_phy_power_on,
|
||||
.power_off = exynos5_usbdrd_phy_power_off,
|
||||
+ .calibrate = exynos5_usbdrd_phy_calibrate,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
|
||||
index 03474d3..224e0dd 100644
|
||||
--- a/drivers/usb/dwc3/core.c
|
||||
+++ b/drivers/usb/dwc3/core.c
|
||||
@@ -156,9 +156,10 @@ static void __dwc3_set_mode(struct work_struct *work)
|
||||
} else {
|
||||
if (dwc->usb2_phy)
|
||||
otg_set_vbus(dwc->usb2_phy->otg, true);
|
||||
- if (dwc->usb2_generic_phy)
|
||||
+ if (dwc->usb2_generic_phy) {
|
||||
phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
|
||||
-
|
||||
+ phy_calibrate(dwc->usb2_generic_phy);
|
||||
+ }
|
||||
}
|
||||
break;
|
||||
case DWC3_GCTL_PRTCAP_DEVICE:
|
||||
@@ -955,6 +956,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
|
||||
dev_err(dev, "failed to initialize host\n");
|
||||
return ret;
|
||||
}
|
||||
+ if (dwc->usb2_generic_phy)
|
||||
+ phy_calibrate(dwc->usb2_generic_phy);
|
||||
break;
|
||||
case USB_DR_MODE_OTG:
|
||||
INIT_WORK(&dwc->drd_work, __dwc3_set_mode);
|
@ -584,9 +584,10 @@ Patch321: bcm283x-dma-mapping-skip-USB-devices-when-configuring-DMA-during-probe
|
||||
# https://git.kernel.org/pub/scm/linux/kernel/git/ardb/linux.git/log/?h=synquacer-netsec
|
||||
Patch332: arm64-socionext-96b-enablement.patch
|
||||
|
||||
# This needs a rebase
|
||||
# Patch335: arm-exynos-fix-usb3.patch
|
||||
# Fix Raspberry Pi and possibly some other dwc2/dwc3 users
|
||||
# https://patchwork.kernel.org/patch/10149439/
|
||||
|
||||
Patch399: phy-work-around-phys-references-to-usb-phy-devices.patch
|
||||
# 400 - IBM (ppc/s390x) patches
|
||||
|
||||
# 500 - Temp fixes/CVEs etc
|
||||
@ -1892,6 +1893,9 @@ fi
|
||||
#
|
||||
#
|
||||
%changelog
|
||||
* Wed Jan 10 2018 Peter Robinson <pbrobinson@fedoraproject.org>
|
||||
- Fix USB on Raspberry Pi (and possibly other dwc2 devices)
|
||||
|
||||
* Tue Jan 09 2018 Laura Abbott <labbott@redhat.com> - 4.15.0-0.rc7.git1.1
|
||||
- Linux v4.15-rc7-79-gef7f8cec80a0
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user