kernel/Makefile.rhelver

68 lines
2.3 KiB
Makefile
Raw Normal View History

RHEL_MAJOR = 9
kernel-5.14.0-428.el9 * Wed Mar 06 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-428.el9] - x86/fpu: Stop relying on userspace for info to fault in xsave buffer (Steve Best) [RHEL-26672] {CVE-2024-26603} - redhat: configs: Enable CONFIG_MEMTEST to enable memory test (Eric Chanudet) [RHEL-24906] - x86/smpboot/64: Handle X2APIC BIOS inconsistency gracefully (David Arcari) [RHEL-19514] - x86/apic: Fake primary thread mask for XEN/PV (David Arcari) [RHEL-19514] - cpu/hotplug: Remove dependancy against cpu_primary_thread_mask (David Arcari) [RHEL-19514] - x86/smpboot: Fix the parallel bringup decision (David Arcari) [RHEL-19514] - x86/realmode: Make stack lock work in trampoline_compat() (David Arcari) [RHEL-19514] - x86/smp: Initialize cpu_primary_thread_mask late (David Arcari) [RHEL-19514] - cpu/hotplug: Fix off by one in cpuhp_bringup_mask() (David Arcari) [RHEL-19514] - x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils (David Arcari) [RHEL-19514] - x86/tsc: Defer marking TSC unstable to a worker (David Arcari) [RHEL-19514] - cpu/hotplug: Remove unused function declaration cpu_set_state_online() (David Arcari) [RHEL-19514] - x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it (David Arcari) [RHEL-19514] - x86/smpboot: Support parallel startup of secondary CPUs (David Arcari) [RHEL-19514] - x86/apic/x2apic: Allow CPU cluster_mask to be populated in parallel (David Arcari) [RHEL-19514] - x86/smpboot: Remove initial_gs (David Arcari) [RHEL-19514] - x86/smpboot: Remove early_gdt_descr on 64-bit (David Arcari) [RHEL-19514] - x86/smpboot: Implement a bit spinlock to protect the realmode stack (David Arcari) [RHEL-19514] - x86/apic: Save the APIC virtual base address (David Arcari) [RHEL-19514] - x86/smpboot: Remove initial_stack on 64-bit (David Arcari) [RHEL-19514] - cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE (David Arcari) [RHEL-19514] - x86/apic: Provide cpu_primary_thread mask (David Arcari) [RHEL-19514] - x86/smpboot: Enable split CPU startup (David Arcari) [RHEL-19514] - cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism (David Arcari) [RHEL-19514] - cpu/hotplug: Remove unused state functions (David Arcari) [RHEL-19514] - riscv: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514] - MIPS: SMP_CPS: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514] - arm64: smp: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514] - ARM: smp: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514] - cpu/hotplug: Remove cpu_report_state() and related unused cruft (David Arcari) [RHEL-19514] - cpu/hotplug: Add debug printks for hotplug callback failures (David Arcari) [RHEL-19514] - cpu/hotplug: Do not bail-out in DYING/STARTING sections (David Arcari) [RHEL-19514] - cpu/hotplug: Initialise all cpuhp_cpu_state structs earlier (David Arcari) [RHEL-19514] - x86/smpboot: Switch to hotplug core state synchronization (David Arcari) [RHEL-19514] - cpu/hotplug: Add CPU state tracking and synchronization (David Arcari) [RHEL-19514] - x86/xen/hvm: Get rid of DEAD_FROZEN handling (David Arcari) [RHEL-19514] - x86/xen/smp_pv: Remove wait for CPU online (David Arcari) [RHEL-19514] - x86/smpboot: Remove wait for cpu_online() (David Arcari) [RHEL-19514] - cpu/hotplug: Rework sparse_irq locking in bringup_cpu() (David Arcari) [RHEL-19514] - x86/smpboot: Remove cpu_callin_mask (David Arcari) [RHEL-19514] - x86/smpboot: Make TSC synchronization function call based (David Arcari) [RHEL-19514] - x86/smpboot: Move synchronization masks to SMP boot code (David Arcari) [RHEL-19514] - x86/cpu/cacheinfo: Remove cpu_callout_mask dependency (David Arcari) [RHEL-19514] - gitlab-ci: enable arm64/s390x/ppc64le debug builds (Michael Hofmann) - PCI/ASPM: Fix deadlock when enabling ASPM (Myron Stowe) [RHEL-26162] - MAINTAINERS: Orphan Cadence PCIe IP (Myron Stowe) [RHEL-26162] - Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()" (Myron Stowe) [RHEL-26162] - Revert "PCI: acpiphp: Reassign resources on bridge if necessary" (Myron Stowe) [RHEL-26162] - PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert (Myron Stowe) [RHEL-26162] - PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter (Myron Stowe) [RHEL-26162] - PCI: qcom: Clean up ASPM comment (Myron Stowe) [RHEL-26162] - PCI: qcom: Fix potential deadlock when enabling ASPM (Myron Stowe) [RHEL-26162] - PCI: vmd: Fix potential deadlock when enabling ASPM (Myron Stowe) [RHEL-26162] - PCI/ASPM: Add pci_enable_link_state_locked() (Myron Stowe) [RHEL-26162] - PCI: loongson: Limit MRRS to 256 (Myron Stowe) [RHEL-26162] - PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() (Myron Stowe) [RHEL-26162] - PCI: endpoint: Fix double free in __pci_epc_create() (Myron Stowe) [RHEL-26162] - PCI: Replace unnecessary UTF-8 in Kconfig (Myron Stowe) [RHEL-26162] - logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations (Myron Stowe) [RHEL-26162] - PCI: Make pci_assign_unassigned_resources() non-init (Myron Stowe) [RHEL-26162] - PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device (Myron Stowe) [RHEL-26162] - PCI/portdrv: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/VC: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/PTM: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/PME: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/ATS: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/ATS: Show PASID Capability register width in bitmasks (Myron Stowe) [RHEL-26162] - PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk (Myron Stowe) [RHEL-26162] - PCI: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI/MSI: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162] - PCI/DPC: Use defines with DPC reason fields (Myron Stowe) [RHEL-26162] - PCI/DPC: Use defined fields with DPC_CTL register (Myron Stowe) [RHEL-26162] - PCI/DPC: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI: hotplug: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162] - PCI: dwc: Use FIELD_GET/PREP() (Myron Stowe) [RHEL-26162] - PCI: cadence: Use FIELD_GET() (Myron Stowe) [RHEL-26162] - PCI: Use FIELD_GET() to extract Link Width (Myron Stowe) [RHEL-26162] - PCI: mvebu: Use FIELD_PREP() with Link Width (Myron Stowe) [RHEL-26162] - PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields (Myron Stowe) [RHEL-26162] - scsi: ipr: Do PCI error checks on own line (Myron Stowe) [RHEL-26162] - PCI: xgene: Do PCI error check on own line & keep return value (Myron Stowe) [RHEL-26162] - PCI: Do error check on own line to split long "if" conditions (Myron Stowe) [RHEL-26162] - atm: iphase: Do PCI error checks on own line (Myron Stowe) [RHEL-26162] - sh: pci: Do PCI error check on own line (Myron Stowe) [RHEL-26162] - alpha: Streamline convoluted PCI error handling (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge (Myron Stowe) [RHEL-26162] - PCI: xilinx-cpm: Move IRQ definitions to a common header (Myron Stowe) [RHEL-26162] - PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses (Myron Stowe) [RHEL-26162] - PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example (Myron Stowe) [RHEL-26162] - PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: xilinx-nwl: Convert to YAML schemas of Xilinx NWL PCIe Root Port Bridge (Myron Stowe) [RHEL-26162] - PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed (Myron Stowe) [RHEL-26162] - PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed (Myron Stowe) [RHEL-26162] - PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed (Myron Stowe) [RHEL-26162] - misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller (Myron Stowe) [RHEL-26162] - MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 (Myron Stowe) [RHEL-26162] - PCI: rcar-gen4: Add endpoint mode support (Myron Stowe) [RHEL-26162] - PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host (Myron Stowe) [RHEL-26162] - dt-bindings: PCI: dwc: Update maxItems of reg and reg-names (Myron Stowe) [RHEL-26162] - PCI: dwc: endpoint: Introduce .pre_init() and .deinit() (Myron Stowe) [RHEL-26162] - PCI: dwc: Expose dw_pcie_write_dbi2() to module (Myron Stowe) [RHEL-26162] - PCI: dwc: Expose dw_pcie_ep_exit() to module (Myron Stowe) [RHEL-26162] - PCI: dwc: Add EDMA_UNROLL capability flag (Myron Stowe) [RHEL-26162] - PCI: dwc: endpoint: Add multiple PFs support for dbi2 (Myron Stowe) [RHEL-26162] - PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting (Myron Stowe) [RHEL-26162] - PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling (Myron Stowe) [RHEL-26162] - PCI: dwc: Add dw_pcie_link_set_max_link_width() (Myron Stowe) [RHEL-26162] - PCI: Add T_PVPERL macro (Myron Stowe) [RHEL-26162] - PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers (Myron Stowe) [RHEL-26162] - PCI: layerscape-ep: Set 64-bit DMA mask (Myron Stowe) [RHEL-26162] - PCI: cadence: Drop unused member from struct cdns_plat_pcie (Myron Stowe) [RHEL-26162] - PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops (Myron Stowe) [RHEL-26162] - PCI: dwc: Add host_post_init() callback (Myron Stowe) [RHEL-26162] - drm/qxl: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162] - drm/virtio: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162] - PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga() (Myron Stowe) [RHEL-26162] - PCI/VGA: Select VGA devices earlier (Myron Stowe) [RHEL-26162] - PCI/VGA: Use pci_is_vga() to identify VGA devices (Myron Stowe) [RHEL-26162] - PCI: Add pci_is_vga() helper (Myron Stowe) [RHEL-26162] - PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card (Myron Stowe) [RHEL-26162] - x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 (Myron Stowe) [RHEL-26162] - PCI/sysfs: Protect driver's D3cold preference from user space (Myron Stowe) [RHEL-26162] - PCI/P2PDMA: Remove redundant goto (Myron Stowe) [RHEL-26162] - PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap (Myron Stowe) [RHEL-26162] - PCI: acpiphp: Allow built-in drivers for Attention Indicators (Myron Stowe) [RHEL-26162] - PCI: keystone: Don't discard .probe() callback (Myron Stowe) [RHEL-26162] - PCI: keystone: Don't discard .remove() callback (Myron Stowe) [RHEL-26162] - PCI: kirin: Don't discard .remove() callback (Myron Stowe) [RHEL-26162] - PCI: exynos: Don't discard .remove() callback (Myron Stowe) [RHEL-26162] - PCI/ACPI: Use acpi_evaluate_dsm_typed() (Myron Stowe) [RHEL-26162] - drm/radeon: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162] - drm/amdgpu: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162] - drm/nouveau: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162] - ALSA: hda: Use pci_get_base_class() to reduce duplicated code (Myron Stowe) [RHEL-26162] - PCI: Add pci_get_base_class() helper (Myron Stowe) [RHEL-26162] - PCI: endpoint: Use IS_ERR_OR_NULL() helper function (Myron Stowe) [RHEL-26162] - PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() (Myron Stowe) [RHEL-26162] - Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1" (Myron Stowe) [RHEL-26162] - PCI/ASPM: Convert printk() to pr_*() and add include (Myron Stowe) [RHEL-26162] - PCI/ASPM: Remove unnecessary includes (Myron Stowe) [RHEL-26162] - PCI/ASPM: Use FIELD_MAX() instead of literals (Myron Stowe) [RHEL-26162] - PCI/ASPM: Use time constants (Myron Stowe) [RHEL-26162] - PCI/ASPM: Return U32_MAX instead of bit magic construct (Myron Stowe) [RHEL-26162] - PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields (Myron Stowe) [RHEL-26162] - PCI: Add PCI_L1SS_CTL2 fields (Myron Stowe) [RHEL-26162] - PCI/AER: Factor out interrupt toggling into helpers (Myron Stowe) [RHEL-26162] - pinctrl: intel: use the correct _PM_OPS() export macro (David Arcari) [RHEL-26354] - pinctrl: don't put the reference to GPIO device in pinctrl_pins_show() (David Arcari) [RHEL-26354] - PM: Provide EXPORT_NS_GPL_DEV_SLEEP_PM_OPS (David Arcari) [RHEL-26354] - pinctrl: intel: Add Intel Meteor Point pin controller and GPIO support (David Arcari) [RHEL-26354] - pinctrl: core: Remove unused members from struct group_desc (David Arcari) [RHEL-26354] - pinctrl: imx: Convert to use grp member (David Arcari) [RHEL-26354] - pinctrl: imx: Use temporary variable to hold pins (David Arcari) [RHEL-26354] - pinctrl: freescale: remove generic pin config core support (David Arcari) [RHEL-26354] - pinctrl: core: Embed struct pingroup into struct group_desc (David Arcari) [RHEL-26354] - pinctrl: core: Add a convenient define PINCTRL_GROUP_DESC() (David Arcari) [RHEL-26354] - pinctrl: baytrail: use gpiochip_dup_line_label() (David Arcari) [RHEL-26354] - gpiolib: provide gpiochip_dup_line_label() (David Arcari) [RHEL-26354] - pinctrl: core: Make pins const unsigned int pointer in struct group_desc (David Arcari) [RHEL-26354] - pinctrl: Convert unsigned to unsigned int (David Arcari) [RHEL-26354] - pinctrl: don't include GPIOLIB private header (David Arcari) [RHEL-26354] - pinctrl: stop using gpiod_to_chip() (David Arcari) [RHEL-26354] - gpiolib: add gpio_device_get_label() stub for !GPIOLIB (David Arcari) [RHEL-26354] - gpiolib: add gpio_device_get_base() stub for !GPIOLIB (David Arcari) [RHEL-26354] - gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB (David Arcari) [RHEL-26354] - gpiolib: Fix scope-based gpio_device refcounting (David Arcari) [RHEL-26354] - gpiolib: provide gpio_device_get_label() (David Arcari) [RHEL-26354] - gpiolib: provide gpio_device_get_base() (David Arcari) [RHEL-26354] - gpiolib: provide gpiod_to_gpio_device() (David Arcari) [RHEL-26354] - gpiolib: add support for scope-based management to gpio_device (David Arcari) [RHEL-26354] - gpiolib: make gpio_device_get() and gpio_device_put() public (David Arcari) [RHEL-26354] - pinctrl: baytrail: Simplify code with cleanup helpers (David Arcari) [RHEL-26354] - pinctrl: Bulk conversion to generic_handle_domain_irq() (David Arcari) [RHEL-26354] - pinctrl: baytrail: Move default strength assignment to a switch-case (David Arcari) [RHEL-26354] - pinctrl: baytrail: Factor out byt_gpio_force_input_mode() (David Arcari) [RHEL-26354] - pinctrl: baytrail: Fix types of config value in byt_pin_config_set() (David Arcari) [RHEL-26354] - pinctrl: avoid reload of p state in list iteration (David Arcari) [RHEL-26354] - pinctrl: intel: Add a generic Intel pin control platform driver (David Arcari) [RHEL-26354] - devres: Provide krealloc_array (David Arcari) [RHEL-26354] - redhat/configs: enable new intel pinctrl configs (David Arcari) [RHEL-26354] - pinctrl: intel: Revert "Unexport intel_pinctrl_probe()" (David Arcari) [RHEL-26354] - pinctrl: intel: allow independent COMPILE_TEST (David Arcari) [RHEL-26354] - pinctrl: intel: Refactor intel_pinctrl_get_soc_data() (David Arcari) [RHEL-26354] - pinctrl: intel: Move default strength assignment to a switch-case (David Arcari) [RHEL-26354] - pinctrl: intel: Make PM ops functions static (David Arcari) [RHEL-26354] - pinctrl: tigerlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: sunrisepoint: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: meteorlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: lewisburg: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: lakefield: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: jasperlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: icelake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: geminilake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: emmitsburg: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: elkhartlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: denverton: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: cedarfork: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: cannonlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: broxton: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: alderlake: Switch to use Intel pin control PM ops (David Arcari) [RHEL-26354] - pinctrl: intel: Provide Intel pin control wide PM ops structure (David Arcari) [RHEL-26354] - Remove custom EXPORT_NS_GPL_DEV_PM_OPS macro (David Arcari) [RHEL-26354] - PM: Improve EXPORT_*_DEV_PM_OPS macros (David Arcari) [RHEL-26354] - export: fix string handling of namespace in EXPORT_SYMBOL_NS (David Arcari) [RHEL-26354] - PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv (David Arcari) [RHEL-26354] - pinctrl: change the signature of pinctrl_ready_for_gpio_range() (David Arcari) [RHEL-26354] - pinctrl: change the signature of gpio_to_pin() (David Arcari) [RHEL-26354] - pinctrl: change the signature of pinctrl_match_gpio_range() (David Arcari) [RHEL-26354] - pinctrl: change the signature of pinctrl_get_device_gpio_range() (David Arcari) [RHEL-26354] - pinctrl: change the signature of pinctrl_gpio_direction() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_set_config_new() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_direction_output_new() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_direction_input_new() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_free_new() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_request_new() (David Arcari) [RHEL-26354] - treewide: rename pinctrl_gpio_can_use_line_new() (David Arcari) [RHEL-26354] - gpio: cdev: use pinctrl_gpio_can_use_line_new() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_set_config() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_direction_output() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_direction_input() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_free() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_request() (David Arcari) [RHEL-26354] - pinctrl: remove pinctrl_gpio_can_use_line() (David Arcari) [RHEL-26354] - pinctrl: intel: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - gpio: aspeed: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config() (David Arcari) [RHEL-26354] - gpio: vf610: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - pinctrl: bcm: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - gpio: tegra: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - gpiolib: generic: use new pinctrl GPIO helpers (David Arcari) [RHEL-26354] - pinctrl: provide new GPIO-to-pinctrl glue helpers (David Arcari) [RHEL-26354] - pinctrl: intel: use acpi_dev_uid_match() for matching _UID (David Arcari) [RHEL-26354] - ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID (David Arcari) [RHEL-26354] - pinctrl: remove unneeded extern specifiers from consumer.h (David Arcari) [RHEL-26354] - kernel.h: Move ARRAY_SIZE() to a separate header (David Arcari) [RHEL-26354] - Revert "pinctrl: avoid unsafe code pattern in find_pinctrl()" (David Arcari) [RHEL-26354] - pinctrl: intel: fetch community only when we need it (David Arcari) [RHEL-26354] - pinctrl: core: Remove unneeded {} around one line conditional body (David Arcari) [RHEL-26354] - pinctrl: denverton: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (David Arcari) [RHEL-26354] - pinctrl: broxton: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() (David Arcari) [RHEL-26354] - pinctrl: intel: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354] - pinctrl: baytrail: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354] - pinctrl: Replace kernel.h by what is actually being used (David Arcari) [RHEL-26354] - pinctrl: baytrail: drop runtime PM support (David Arcari) [RHEL-26354] - pinctrl: intel: refine intel_config_set_pull() function (David Arcari) [RHEL-26354] - pinctrl: denverton: Enable platform device in the absence of ACPI enumeration (David Arcari) [RHEL-26354] - pinctrl: intel: Simplify code with cleanup helpers (David Arcari) [RHEL-26354] - pinctrl: avoid unsafe code pattern in find_pinctrl() (David Arcari) [RHEL-26354] - pinctrl: baytrail: fix debounce disable case (David Arcari) [RHEL-26354] - pinctrl: pinmux: Remove duplicate error message in pin_request() (David Arcari) [RHEL-26354] - pinctrl: intel: consolidate ACPI dependency (David Arcari) [RHEL-26354] - pinctrl: baytrail: Make use of pm_ptr() (David Arcari) [RHEL-26354] - pinctrl: baytrail: reuse common functions from pinctrl-intel (David Arcari) [RHEL-26354] - pinctrl: intel: export common pinctrl functions (David Arcari) [RHEL-26354] - pinctrl: baytrail: consolidate common mask operation (David Arcari) [RHEL-26354] - pinctrl: pinmux: handle radix_tree_insert() errors in pinmux_generic_add_function() (David Arcari) [RHEL-26354] - pinctrl: core: handle radix_tree_insert() errors in pinctrl_register_one_pin() (David Arcari) [RHEL-26354] - pinctrl: core: handle radix_tree_insert() errors in pinctrl_generic_add_group() (David Arcari) [RHEL-26354] - pinctrl: baytrail: invert if condition (David Arcari) [RHEL-26354] - pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure (David Arcari) [RHEL-26354] - pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook (David Arcari) [RHEL-26354] - pinctrl: intel: refine ->irq_set_type() hook (David Arcari) [RHEL-26354] - pinctrl: intel: refine ->set_mux() hook (David Arcari) [RHEL-26354] - pinctrl: baytrail: Use str_hi_lo() helper (David Arcari) [RHEL-26354] - pinctrl: Relax user input size in pinmux_select() (David Arcari) [RHEL-26354] - pinctrl: Duplicate user memory in one go in pinmux_select() (David Arcari) [RHEL-26354] - pinctrl: baytrail: Unify style of error and debug messages (David Arcari) [RHEL-26354] - pinctrl: baytrail: Use BIT() in BYT_PULL_ASSIGN_* definitions (David Arcari) [RHEL-26354] - pinctrl: sunrisepoint: Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*() (David Arcari) [RHEL-26354] - pinctrl: tigerlake: Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: lewisburg: Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354] - pinctrl: lakefield: Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: jasperlake: Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: icelake: Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: geminilake: Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354] - pinctrl: emmitsburg: Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: elkhartlake: Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: denverton: Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: cedarfork: Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: cannonlake: Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: broxton: Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE() (David Arcari) [RHEL-26354] - pinctrl: alderlake: Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS() (David Arcari) [RHEL-26354] - pinctrl: intel: Enumerate PWM device when community has a capability (David Arcari) [RHEL-26354] - pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe() (David Arcari) [RHEL-26354] - pwm: lpss: Allow other drivers to enable PWM LPSS (David Arcari) [RHEL-26354] - pwm: lpss: Include headers we are the direct user of (David Arcari) [RHEL-26354] - pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS (David Arcari) [RHEL-26354] - pwm: lpss: Add a comment to the bypass field (David Arcari) [RHEL-26354] - pwm: lpss: Move resource mapping to the glue drivers (David Arcari) [RHEL-26354] - pwm: lpss: Deduplicate board info data structures (David Arcari) [RHEL-26354] - pinctrl: intel: Add Intel Moorefield pin controller support (David Arcari) [RHEL-26354] - pinctrl: sunrisepoint: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354] - pinctrl: tigerlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354] - pinctrl: alderlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354] - pinctrl: cannonlake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354] - pinctrl: icelake: Deduplicate COMMUNITY macro code (David Arcari) [RHEL-26354] - pinctrl: core: Use device_match_of_node() helper (David Arcari) [RHEL-26354] - redhat/configs: intel pinctrl config cleanup (David Arcari) [RHEL-26354] - config: wifi: enable MT7925E card (Jose Ignacio Tornos Martinez) [RHEL-14693] - shmem: support idmapped mounts for tmpfs (Giuseppe Scrivano) [RHEL-23900] - iommu/vt-d: Fix incorrect cache invalidation for mm notification (Jerry Snitselaar) [RHEL-26541] - mmu_notifiers: rename invalidate_range notifier (Jerry Snitselaar) [RHEL-26541] - mmu_notifiers: don't invalidate secondary TLBs as part of mmu_notifier_invalidate_range_end() (Jerry Snitselaar) [RHEL-26541] - mmu_notifiers: call invalidate_range() when invalidating TLBs (Jerry Snitselaar) [RHEL-26541] - mmu_notifiers: fixup comment in mmu_interval_read_begin() (Jerry Snitselaar) [RHEL-26541] - mlxbf_gige: Enable the GigE port in mlxbf_gige_open (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: Fix intermittent no ip issue (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: fix receive packet race condition (Luiz Capitulino) [RHEL-21118] - net: ethernet: mellanox: Convert to platform remove callback returning void (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: Remove two unused function declarations (Luiz Capitulino) [RHEL-21118] - net: mellanox: mlxbf_gige: Fix skb_panic splat under memory pressure (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: fix white space in mlxbf_gige_eth_ioctl (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: add "set_link_ksettings" ethtool callback (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: support 10M/100M/1G speeds on BlueField-3 (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: add MDIO support for BlueField-3 (Luiz Capitulino) [RHEL-21118] - net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: clear MDIO gateway lock after read (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: compute MDIO period based on i1clk (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: remove own module name define and use KBUILD_MODNAME instead (Luiz Capitulino) [RHEL-21118] - net/mlxbf_gige: use eth_zero_addr() to clear mac address (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: remove driver-managed interrupt counts (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: increase MDIO polling rate to 5us (Luiz Capitulino) [RHEL-21118] - net: mellanox: mlxbf_gige: Replace non-standard interrupt handling (Luiz Capitulino) [RHEL-21118] - mlxbf_gige: clear valid_polarity upon open (Luiz Capitulino) [RHEL-21118] - net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() (Luiz Capitulino) [RHEL-21118] - redhat: update self-test data (Scott Weaver) - redhat: enable zstream release numbering for RHEL 9.4 (Scott Weaver) - redhat: set default dist suffix for RHEL 9.4 (Scott Weaver) - redhat: fix changelog copying (Jan Stancek) - Bump RHEL_MINOR for 9.5 (Lucas Zampieri) - redhat: do not compress the full kernel changelog in the src.rpm (Herton R. Krzesinski) - redhat: ship all the changelog from source git into kernel-doc (Herton R. Krzesinski) - redhat: create an empty changelog file when changing its name (Herton R. Krzesinski) Resolves: RHEL-19514, RHEL-24906, RHEL-26162, RHEL-26354, RHEL-26672 Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
2024-03-06 14:13:45 +00:00
RHEL_MINOR = 5
#
# RHEL_RELEASE
# -------------
#
# Represents build number in 'release' part of RPM's name-version-release.
# name is <package_name>, e.g. kernel
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
kernel-5.14.0-464.el9 * Thu Jun 13 2024 Lucas Zampieri <lzampier@redhat.com> [5.14.0-464.el9] - nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells (Steve Best) [RHEL-38438] {CVE-2021-47497} - kernel: watch_queue: copy user-array safely (Steve Best) [RHEL-38238] {CVE-2023-52824} - lib/generic-radix-tree.c: Don't overflow in peek() (Waiman Long) [RHEL-37739 RHEL-37740] {CVE-2021-47432} - include/linux/generic-radix-tree.h: replace kernel.h with the necessary inclusions (Waiman Long) [RHEL-37739 RHEL-37740] {CVE-2021-47432} - efi: runtime: Fix potential overflow of soft-reserved region size (Lenny Szubowicz) [RHEL-33098] {CVE-2024-26843} - workqueue: Drain BH work items on hot-unplugged CPUs (Waiman Long) [RHEL-25103] - workqueue: Control intensive warning threshold through cmdline (Waiman Long) [RHEL-25103] - workqueue: Make @flags handling consistent across set_work_data() and friends (Waiman Long) [RHEL-25103] - workqueue: Remove clear_work_data() (Waiman Long) [RHEL-25103] - workqueue: Factor out work_grab_pending() from __cancel_work_sync() (Waiman Long) [RHEL-25103] - workqueue: Clean up enum work_bits and related constants (Waiman Long) [RHEL-25103] - workqueue: Introduce work_cancel_flags (Waiman Long) [RHEL-25103] - workqueue: Use variable name irq_flags for saving local irq flags (Waiman Long) [RHEL-25103] - workqueue: Reorganize flush and cancel[_sync] functions (Waiman Long) [RHEL-25103] - workqueue: Rename __cancel_work_timer() to __cancel_timer_sync() (Waiman Long) [RHEL-25103] - workqueue: Use rcu_read_lock_any_held() instead of rcu_read_lock_held() (Waiman Long) [RHEL-25103] - workqueue: Cosmetic changes (Waiman Long) [RHEL-25103] - workqueue, irq_work: Build fix for !CONFIG_IRQ_WORK (Waiman Long) [RHEL-25103] - workqueue: Fix queue_work_on() with BH workqueues (Waiman Long) [RHEL-25103] - async: Use a dedicated unbound workqueue with raised min_active (Waiman Long) [RHEL-25103] - workqueue: Implement workqueue_set_min_active() (Waiman Long) [RHEL-25103] - workqueue: Fix kernel-doc comment of unplug_oldest_pwq() (Waiman Long) [RHEL-25103] - workqueue: Bind unbound workqueue rescuer to wq_unbound_cpumask (Waiman Long) [RHEL-25103] - kernel/workqueue: Let rescuers follow unbound wq cpumask changes (Waiman Long) [RHEL-25103] - workqueue: Enable unbound cpumask update on ordered workqueues (Waiman Long) [RHEL-25103] - workqueue: Link pwq's into wq->pwqs from oldest to newest (Waiman Long) [RHEL-25103] - workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered (Waiman Long) [RHEL-25103] - workqueue: Skip __WQ_DESTROYING workqueues when updating global unbound cpumask (Waiman Long) [RHEL-25103] - workqueue: fix a typo in comment (Waiman Long) [RHEL-25103] - Revert "workqueue: make wq_subsys const" (Waiman Long) [RHEL-25103] - workqueue: Implement BH workqueues to eventually replace tasklets (Waiman Long) [RHEL-25103] - workqueue: Factor out init_cpu_worker_pool() (Waiman Long) [RHEL-25103] - workqueue: Update lock debugging code (Waiman Long) [RHEL-25103] - workqueue: make wq_subsys const (Waiman Long) [RHEL-25103] - workqueue: Fix pwq->nr_in_flight corruption in try_to_grab_pending() (Waiman Long) [RHEL-25103] - workqueue: Avoid premature init of wq->node_nr_active[].max (Waiman Long) [RHEL-25103] - workqueue: Don't call cpumask_test_cpu() with -1 CPU in wq_update_node_max_active() (Waiman Long) [RHEL-25103] - tools/workqueue/wq_dump.py: Add node_nr/max_active dump (Waiman Long) [RHEL-25103] - workqueue: Implement system-wide nr_active enforcement for unbound workqueues (Waiman Long) [RHEL-25103] - workqueue: Introduce struct wq_node_nr_active (Waiman Long) [RHEL-25103] - workqueue: Move pwq_dec_nr_in_flight() to the end of work item handling (Waiman Long) [RHEL-25103] - workqueue: RCU protect wq->dfl_pwq and implement accessors for it (Waiman Long) [RHEL-25103] - workqueue: Make wq_adjust_max_active() round-robin pwqs while activating (Waiman Long) [RHEL-25103] - workqueue: Move nr_active handling into helpers (Waiman Long) [RHEL-25103] - workqueue: Replace pwq_activate_inactive_work() with [__]pwq_activate_work() (Waiman Long) [RHEL-25103] - workqueue: Factor out pwq_is_empty() (Waiman Long) [RHEL-25103] - workqueue: Move pwq->max_active to wq->max_active (Waiman Long) [RHEL-25103] - workqueue: Break up enum definitions and give names to the types (Waiman Long) [RHEL-25103] - workqueue: Drop unnecessary kick_pool() in create_worker() (Waiman Long) [RHEL-25103] - tools/workqueue/wq_dump.py: Clean up code and drop duplicate information (Waiman Long) [RHEL-25103] - workqueue: mark power efficient workqueue as unbounded if nohz_full enabled (Waiman Long) [RHEL-25103] - workqueue: Add rcu lock check at the end of work item execution (Waiman Long) [RHEL-25103] - kernel/workqueue: Bind rescuer to unbound cpumask for WQ_UNBOUND (Waiman Long) [RHEL-25103] - tools/workqueue: Add rescuers printing to wq_dump.py (Waiman Long) [RHEL-25103] - Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()" (Waiman Long) [RHEL-25103] - Documentation/core-api: fix spelling mistake in workqueue (Waiman Long) [RHEL-25103] - Documentation/core-api : fix typo in workqueue (Waiman Long) [RHEL-25103] - async: Split async_schedule_node_domain() (Waiman Long) [RHEL-25103] - workqueue: Provide one lock class key per work_on_cpu() callsite (Waiman Long) [RHEL-25103] - workqueue: fix -Wformat-truncation in create_worker (Waiman Long) [RHEL-25103] - workqueue: Use the kmem_cache_free() instead of kfree() to release pwq (Waiman Long) [RHEL-25103] - workqueue: doc: Fix function and sysfs path errors (Waiman Long) [RHEL-25103] - workqueue: Fix UAF report by KASAN in pwq_release_workfn() (Waiman Long) [RHEL-25103] - workqueue: Fix missed pwq_release_worker creation in wq_cpu_intensive_thresh_init() (Waiman Long) [RHEL-25103] - workqueue: Removed double allocation of wq_update_pod_attrs_buf (Waiman Long) [RHEL-25103] - workqueue: fix data race with the pwq->stats[] increment (Waiman Long) [RHEL-25103] - workqueue: Rename rescuer kworker (Waiman Long) [RHEL-25103] - workqueue: Make default affinity_scope dynamically updatable (Waiman Long) [RHEL-25103] - workqueue: Add "Affinity Scopes and Performance" section to documentation (Waiman Long) [RHEL-25103] - workqueue: Implement non-strict affinity scope for unbound workqueues (Waiman Long) [RHEL-25103] - workqueue: Add workqueue_attrs->__pod_cpumask (Waiman Long) [RHEL-25103] - workqueue: Factor out need_more_worker() check and worker wake-up (Waiman Long) [RHEL-25103] - workqueue: Factor out work to worker assignment and collision handling (Waiman Long) [RHEL-25103] - workqueue: Add multiple affinity scopes and interface to select them (Waiman Long) [RHEL-25103] - workqueue: Modularize wq_pod_type initialization (Waiman Long) [RHEL-25103] - workqueue: Add tools/workqueue/wq_dump.py which prints out workqueue configuration (Waiman Long) [RHEL-25103] - workqueue: Generalize unbound CPU pods (Waiman Long) [RHEL-25103] - workqueue: Factor out clearing of workqueue-only attrs fields (Waiman Long) [RHEL-25103] - workqueue: Factor out actual cpumask calculation to reduce subtlety in wq_update_pod() (Waiman Long) [RHEL-25103] - workqueue: Initialize unbound CPU pods later in the boot (Waiman Long) [RHEL-25103] - workqueue: Move wq_pod_init() below workqueue_init() (Waiman Long) [RHEL-25103] - workqueue: Rename NUMA related names to use pod instead (Waiman Long) [RHEL-25103] - workqueue: Rename workqueue_attrs->no_numa to ->ordered (Waiman Long) [RHEL-25103] - workqueue: Make unbound workqueues to use per-cpu pool_workqueues (Waiman Long) [RHEL-25103] - workqueue: Call wq_update_unbound_numa() on all CPUs in NUMA node on CPU hotplug (Waiman Long) [RHEL-25103] - workqueue: Make per-cpu pool_workqueues allocated and released like unbound ones (Waiman Long) [RHEL-25103] - workqueue: Use a kthread_worker to release pool_workqueues (Waiman Long) [RHEL-25103] - workqueue: Remove module param disable_numa and sysfs knobs pool_ids and numa (Waiman Long) [RHEL-25103] - workqueue: Relocate worker and work management functions (Waiman Long) [RHEL-25103] - workqueue: Rename wq->cpu_pwqs to wq->cpu_pwq (Waiman Long) [RHEL-25103] - workqueue: Not all work insertion needs to wake up a worker (Waiman Long) [RHEL-25103] - workqueue: Cleanups around process_scheduled_works() (Waiman Long) [RHEL-25103] - workqueue: Drop the special locking rule for worker->flags and worker_pool->flags (Waiman Long) [RHEL-25103] - workqueue: use LIST_HEAD to initialize cull_list (Waiman Long) [RHEL-25103] - workqueue: Warn attempt to flush system-wide workqueues. (Waiman Long) [RHEL-25103] - workqueue: Scale up wq_cpu_intensive_thresh_us if BogoMIPS is below 4000 (Waiman Long) [RHEL-25103] - workqueue: Fix cpu_intensive_thresh_us name in help text (Waiman Long) [RHEL-25103] - soc: qcom: qmi: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - scsi: NCR5380: Use default @max_active for hostdata->work_q (Waiman Long) [RHEL-25103] - crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - greybus: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues (Waiman Long) [RHEL-25103] - workqueue: Disable per-cpu CPU hog detection when wq_cpu_intensive_thresh_us is 0 (Waiman Long) [RHEL-25103] - workqueue: Fix WARN_ON_ONCE() triggers in worker_enter_idle() (Waiman Long) [RHEL-25103] - workqueue: Track and monitor per-workqueue CPU time usage (Waiman Long) [RHEL-25103] - redhat/configs: Add CONFIG_WQ_CPU_INTENSIVE_REPORT (Waiman Long) [RHEL-25103] - workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism (Waiman Long) [RHEL-25103] - workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE (Waiman Long) [RHEL-25103] - workqueue: Improve locking rule description for worker fields (Waiman Long) [RHEL-25103] - workqueue: Move worker_set/clr_flags() upwards (Waiman Long) [RHEL-25103] - workqueue: Re-order struct worker fields (Waiman Long) [RHEL-25103] - workqueue: Add pwq->stats[] and a monitoring script (Waiman Long) [RHEL-25103] - Further upgrade queue_work_on() comment (Waiman Long) [RHEL-25103] - workqueue: clean up WORK_* constant types, clarify masking (Waiman Long) [RHEL-25103] - workqueue: Introduce show_freezable_workqueues (Waiman Long) [RHEL-25103] - workqueue: Print backtraces from CPUs with hung CPU bound workqueues (Waiman Long) [RHEL-25103] - workqueue: Warn when a rescuer could not be created (Waiman Long) [RHEL-25103] - workqueue: Interrupted create_worker() is not a repeated event (Waiman Long) [RHEL-25103] - workqueue: Warn when a new worker could not be created (Waiman Long) [RHEL-25103] - workqueue: Fix hung time report of worker pools (Waiman Long) [RHEL-25103] - workqueue: Simplify a pr_warn() call in wq_select_unbound_cpu() (Waiman Long) [RHEL-25103] - scsi: message: fusion: Avoid flush_scheduled_work() usage (Waiman Long) [RHEL-25103] - scsi: message: fusion: Remove unused sas_persist_task work (Waiman Long) [RHEL-25103] - workqueue: Make show_pwq() use run-length encoding (Waiman Long) [RHEL-25103] - workqueue: Add a new flag to spot the potential UAF error (Waiman Long) [RHEL-25103] - workqueue: Make queue_rcu_work() use call_rcu_hurry() (Waiman Long) [RHEL-25103] - treewide: Drop WARN_ON_FUNCTION_MISMATCH (Waiman Long) [RHEL-25103] - Input: psmouse-smbus - avoid flush_scheduled_work() usage (Waiman Long) [RHEL-25103] - workqueue: Convert the type of pool->nr_running to int (Waiman Long) [RHEL-25103] - workqueue: Use wake_up_worker() in wq_worker_sleeping() instead of open code (Waiman Long) [RHEL-25103] - Revert "module, async: async_synchronize_full() on module init iff async is used" (Waiman Long) [RHEL-25103] - workqueue: Upgrade queue_work_on() comment (Waiman Long) [RHEL-25103] - workqueue: doc: Call out the non-reentrance conditions (Waiman Long) [RHEL-25103] Resolves: RHEL-25103, RHEL-33098, RHEL-37739, RHEL-37740, RHEL-38238, RHEL-38438 Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
2024-06-13 13:34:11 +00:00
RHEL_RELEASE = 464
kernel-5.14.0-73.el9 * Sun Mar 20 2022 Patrick Talbert <ptalbert@redhat.com> [5.14.0-73.el9] - CI: Use 9.0-rt branch for rhel-9 realtime_check (Juri Lelli) - redhat: enable zstream release numbering for rhel 9.0 (Herton R. Krzesinski) - redhat: change kabi tarballs to use the package release (Herton R. Krzesinski) - redhat: generate distgit changelog in genspec.sh as well (Herton R. Krzesinski) - redhat: make genspec prefer metadata from git notes (Herton R. Krzesinski) - redhat: use tags from git notes for zstream to generate changelog (Herton R. Krzesinski) - CI: Add disttag setting (Veronika Kabatova) - CI: Drop c9s config (Veronika Kabatova) - virtio-net: fix pages leaking when building skb in big mode (Laurent Vivier) [2042559] - lib/iov_iter: initialize "flags" in new pipe_buffer (Carlos Maiolino) [2060869] {CVE-2022-0847} - redhat/configs: Make CRYPTO_ECDH algos built-in (Simo Sorce) [2062199] - crypto: api - Move cryptomgr soft dependency into algapi (Vladis Dronov) [2062199] - crypto: api - Fix boot-up crash when crypto manager is disabled (Vladis Dronov) [2062199] - crypto: api - Do not create test larvals if manager is disabled (Vladis Dronov) [2062199] - crypto: api - Export crypto_boot_test_finished (Vladis Dronov) [2062199] - crypto: api - Fix built-in testing dependency failures (Vladis Dronov) [2062199] - redhat/configs: Add CRYPTO_AES_ARM64 config explicitly (Vladis Dronov) [2062199] - crypto: arm64/aes-ce - stop using SIMD helper for skciphers (Vladis Dronov) [2062199] - crypto: arm64/aes-neonbs - stop using SIMD helper for skciphers (Vladis Dronov) [2062199] - redhat: change default dist suffix for RHEL 9.0 (Herton R. Krzesinski) - selftests: kvm: Check whether SIDA memop fails for normal guests (Thomas Huth) [2050813] - KVM: s390: Return error on SIDA memop on normal guest (Thomas Huth) [2050813] - block: kabi: reserve space for block layer public structure (Ming Lei) [2057238] - block: kabi: reserve space for blk-mq related structure (Ming Lei) [2057238] - block: kabi: reserve space for bsg related structure (Ming Lei) [2057238] - block: kabi: reserve space for integrity related structure (Ming Lei) [2057238] - scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop (Dick Kennedy) [2054866] - x86/MCE/AMD, EDAC/mce_amd: Support non-uniform MCA bank type enumeration (Aristeu Rozanski) [1898165 2047430 2047446] - x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank types (Aristeu Rozanski) [1898165 2047430 2047446] - EDAC/amd64: Add support for AMD Family 19h Models 10h-1Fh and A0h-AFh (Aristeu Rozanski) [1898165 2047430 2047446] - EDAC: Add RDDR5 and LRDDR5 memory types (Aristeu Rozanski) [1898165 2047430 2047446] - drm/amdgpu: Register MCE notifier for Aldebaran RAS (Aristeu Rozanski) [1898165 2047430 2047446] - x86/MCE/AMD: Export smca_get_bank_type symbol (Aristeu Rozanski) [1898165 2047430 2047446] - PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment (Mark Langsdorf) [2049635] - PCI/ACPI: Check for _OSC support in acpi_pci_osc_control_set() (Mark Langsdorf) [2049635] - PCI/ACPI: Move _OSC query checks to separate function (Mark Langsdorf) [2049635] - PCI/ACPI: Move supported and control calculations to separate functions (Mark Langsdorf) [2049635] - PCI/ACPI: Remove OSC_PCI_SUPPORT_MASKS and OSC_PCI_CONTROL_MASKS (Mark Langsdorf) [2049635] - nvmet-tcp: fix missing unmainted messages (Chris Leech) [2054441] - dm stats: fix too short end duration_ns when using precise_timestamps (Benjamin Marzinski) [2051798] - dm: fix double accounting of flush with data (Benjamin Marzinski) [2051798] - dm: interlock pending dm_io and dm_wait_for_bios_completion (Benjamin Marzinski) [2051798] - dm: properly fix redundant bio-based IO accounting (Benjamin Marzinski) [2051798] - dm: revert partial fix for redundant bio-based IO accounting (Benjamin Marzinski) [2051798] - block: add bio_start_io_acct_time() to control start_time (Benjamin Marzinski) [2051798] - scsi: mpt3sas: Fix incorrect system timestamp (Tomas Henzl) [2049631] - scsi: mpt3sas: Fix system going into read-only mode (Tomas Henzl) [2049631] - scsi: mpt3sas: Fix kernel panic during drive powercycle test (Tomas Henzl) [2049631] - redhat/configs: enable mellanox platform drivers to support LED, fan & watchdog devices (Ivan Vecera) [2057491] - x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define (David Arcari) [2040022] - x86/cpu: Add Raptor Lake to Intel family (David Arcari) [2040022] - powerpc/64: Move paca allocation later in boot (Desnes A. Nunes do Rosario) [2055566] - powerpc: Set crashkernel offset to mid of RMA region (Desnes A. Nunes do Rosario) [2055566] - selftests: kvm: Check whether SIDA memop fails for normal guests (Thomas Huth) [2060814] - KVM: s390: Return error on SIDA memop on normal guest (Thomas Huth) [2060814] - igb: refactor XDP registration (Corinna Vinschen) [2054379] - igc: avoid kernel warning when changing RX ring parameters (Corinna Vinschen) [2054379] - redhat/configs: Enable CONFIG_ACER_WIRELESS (Peter Georg) [2025985] Resolves: rhbz#2025985, rhbz#2054379, rhbz#2060814, rhbz#2055566, rhbz#2040022 Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
2022-03-20 08:42:21 +00:00
#
# ZSTREAM
# -------
#
# This variable controls whether we use zstream numbering or not for the
# package release. The zstream release keeps the build number of the last
# build done for ystream for the Beta milestone, and increments a second
# number for each build. The third number is used for branched builds
# (eg.: for builds with security fixes or hot fixes done outside of the
# batch release process).
#
# For example, with ZSTREAM unset or set to "no", all builds will contain
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
# where X is the build number. With ZSTREAM set to "yes", we will have
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
# build number and Z will always be 1 except if you're doing a branched build
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
# number will be incremented instead of the Y).
#
ZSTREAM ?= no
#
# Early y+1 numbering
# --------------------
#
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
# First is RHEL_RELEASE inherited/merged from y as-is, second number
# is incremented with each build starting from 1. After merge from y,
# it resets back to 1. This way y+1 nvr reflects status of last merge.
#
# Example:
#
# rhel8.0 rhel-8.1
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
# kernel-4.18.0-58.2.el8
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
# kernel-4.18.0-60.el8
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
#
#
# Use this spot to avoid future merge conflicts.
# Do not trim this comment.
EARLY_YSTREAM ?= no
EARLY_YBUILD:=
EARLY_YRELEASE:=
ifneq ("$(ZSTREAM)", "yes")
ifeq ("$(EARLY_YSTREAM)","yes")
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
endif
endif