kernel/SOURCES/fedora-v5.15.patch

3242 lines
104 KiB
Diff
Raw Normal View History

2021-11-06 14:19:23 +00:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Al Stone <ahs3@redhat.com>
Date: Tue, 27 Feb 2018 00:21:23 -0500
2022-02-07 08:12:40 +00:00
Subject: [PATCH 01/35] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI
2021-11-06 14:19:23 +00:00
support
Message-id: <20180227002123.21608-1-ahs3@redhat.com>
Patchwork-id: 206052
O-Subject: [RHEL8 BZ1518076 PATCH] ACPI: APEI: arm64: Ignore broken HPE moonshot APEI support
Bugzilla: 1518076
RH-Acked-by: Mark Salter <msalter@redhat.com>
RH-Acked-by: Jeremy McNicoll <jmcnicol@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1518076
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=15417197
Tested: compile-only; several other patches are required for full booting
QE has tested limited boot (see comment#12 of BZ)
This is a re-post of a RHEL-ALT-7.5 patch specific to aarch64 moonshots
that we use in beaker. It is required for these machines to boot.
commit 8a663a264863efedf8bb4a9d76ac603920fdd739
Author: Robert Richter <rrichter@redhat.com>
Date: Wed Aug 16 19:49:30 2017 -0400
[acpi] APEI: arm64: Ignore broken HPE moonshot APEI support
From: Mark Salter <msalter@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1344237
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=13768971
Tested: Booted on moonshot with patched 4.11.0-20 kernel
Upstream: RHEL-only
The aarch64 HP moonshot platforms we have in beaker and elsewhere have
a firmware bug which causes a spurious fatal memory error via APEI at
boot time. This platform is no longer supported and no further firmware
updates are expected. This is a downstream-only hack to avoid the problem
by bailing out of HEST table probing if we detect a moonshot HEST table.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/apei/hest.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 277f00b288d1..adbce15c273d 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -94,6 +94,14 @@ int apei_hest_parse(apei_hest_func_t func, void *data)
if (hest_disable || !hest_tab)
return -EINVAL;
+#ifdef CONFIG_ARM64
+ /* Ignore broken firmware */
+ if (!strncmp(hest_tab->header.oem_id, "HPE ", 6) &&
+ !strncmp(hest_tab->header.oem_table_id, "ProLiant", 8) &&
+ MIDR_IMPLEMENTOR(read_cpuid_id()) == ARM_CPU_IMP_APM)
+ return -EINVAL;
+#endif
+
hest_hdr = (struct acpi_hest_header *)(hest_tab + 1);
for (i = 0; i < hest_tab->error_source_count; i++) {
len = hest_esrc_len(hest_hdr);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 10 May 2018 17:38:43 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 02/35] ACPI / irq: Workaround firmware issue on X-Gene based
2021-11-06 14:19:23 +00:00
m400
Message-id: <20180510173844.29580-3-msalter@redhat.com>
Patchwork-id: 214383
O-Subject: [RHEL-8 BZ1519554 2/3] ACPI / irq: Workaround firmware issue on X-Gene based m400
Bugzilla: 1519554
RH-Acked-by: Al Stone <astone@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1519554
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16144520
The ACPI firmware on the xgene-based m400 platorms erroneously
describes its UART interrupt as ACPI_PRODUCER rather than
ACPI_CONSUMER. This leads to the UART driver being unable to
find its interrupt and the kernel unable find a console.
Work around this by avoiding the producer/consumer check
for X-Gene UARTs.
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/irq.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/acpi/irq.c b/drivers/acpi/irq.c
index c68e694fca26..146cba5ae5bc 100644
--- a/drivers/acpi/irq.c
+++ b/drivers/acpi/irq.c
@@ -130,6 +130,7 @@ struct acpi_irq_parse_one_ctx {
unsigned int index;
unsigned long *res_flags;
struct irq_fwspec *fwspec;
+ bool skip_producer_check;
};
/**
@@ -201,7 +202,8 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
return AE_CTRL_TERMINATE;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
eirq = &ares->data.extended_irq;
- if (eirq->producer_consumer == ACPI_PRODUCER)
+ if (!ctx->skip_producer_check &&
+ eirq->producer_consumer == ACPI_PRODUCER)
return AE_OK;
if (ctx->index >= eirq->interrupt_count) {
ctx->index -= eirq->interrupt_count;
@@ -236,8 +238,19 @@ static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
static int acpi_irq_parse_one(acpi_handle handle, unsigned int index,
struct irq_fwspec *fwspec, unsigned long *flags)
{
- struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec };
+ struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec, false };
+ /*
+ * Firmware on arm64-based HPE m400 platform incorrectly marks
+ * its UART interrupt as ACPI_PRODUCER rather than ACPI_CONSUMER.
+ * Don't do the producer/consumer check for that device.
+ */
+ if (IS_ENABLED(CONFIG_ARM64)) {
+ struct acpi_device *adev = acpi_bus_get_acpi_device(handle);
+
+ if (adev && !strcmp(acpi_device_hid(adev), "APMC0D08"))
+ ctx.skip_producer_check = true;
+ }
acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx);
return ctx.rc;
}
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 10 May 2018 17:38:44 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 03/35] aarch64: acpi scan: Fix regression related to X-Gene
2021-11-06 14:19:23 +00:00
UARTs
Message-id: <20180510173844.29580-4-msalter@redhat.com>
Patchwork-id: 214381
O-Subject: [RHEL-8 BZ1519554 3/3] aarch64: acpi scan: Fix regression related to X-Gene UARTs
Bugzilla: 1519554
RH-Acked-by: Al Stone <astone@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1519554
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16144520
Commit e361d1f85855 ("ACPI / scan: Fix enumeration for special UART
devices") caused a regression with some X-Gene based platforms (Mustang
and M400) with invalid DSDT. The DSDT makes it appear that the UART
device is also a slave device attached to itself. With the above commit
the UART won't be enumerated by ACPI scan (slave serial devices shouldn't
be). So check for X-Gene UART device and skip slace device check on it.
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/acpi/scan.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
2022-02-07 08:12:40 +00:00
index 6e9cd41c5f9b..07db2f6afa17 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
2022-02-07 08:12:40 +00:00
@@ -1727,6 +1727,15 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
if (!acpi_match_device_ids(device, ignore_serial_bus_ids))
2021-11-06 14:19:23 +00:00
return false;
+ /*
+ * Firmware on some arm64 X-Gene platforms will make the UART
+ * device appear as both a UART and a slave of that UART. Just
+ * bail out here for X-Gene UARTs.
+ */
+ if (IS_ENABLED(CONFIG_ARM64) &&
+ !strcmp(acpi_device_hid(device), "APMC0D08"))
+ return false;
+
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(device, &resource_list,
acpi_check_serial_bus_slave,
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Fri, 11 May 2018 21:01:17 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 04/35] acpi: prefer booting with ACPI over DTS
2021-11-06 14:19:23 +00:00
Message-id: <20180511210117.10457-1-msalter@redhat.com>
Patchwork-id: 214708
O-Subject: [RHEL-8 BZ1576869] [RHEL only] acpi: prefer booting with ACPI over DTS
Bugzilla: 1576869
RH-Acked-by: Jonathan Toppins <jtoppins@redhat.com>
RH-Acked-by: Tony Camuso <tcamuso@redhat.com>
RH-Acked-by: Bhupesh Sharma <bhsharma@redhat.com>
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1576869
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=16208479
Testing: Verified kernel defaults to ACPI on Mustang
From: Jonathan Toppins <jtoppins@redhat.com>
This patch forces ACPI boot tables to be preferred over DTS.
Currently for ACPI to be used a user either has to set acpi=on on the
kernel command line or make sure any device tree passed to the kernel
is empty. If the dtb passed to the kernel is non-empty then device-tree
will be chosen as the boot method of choice.
RHEL does not wish to support this boot method so change table boot
preferences to use ACPI. In the event ACPI table checks fail the kernel
will fallback to using DTS to boot.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
arch/arm64/kernel/acpi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index f3851724fe35..cac21da49455 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -40,7 +40,7 @@ int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);
static bool param_acpi_off __initdata;
-static bool param_acpi_on __initdata;
+static bool param_acpi_on __initdata = true;
static bool param_acpi_force __initdata;
static int __init parse_acpi(char *arg)
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Richter <rrichter@redhat.com>
Date: Thu, 7 Jun 2018 22:59:32 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 05/35] Vulcan: AHCI PCI bar fix for Broadcom Vulcan early
2021-11-06 14:19:23 +00:00
silicon
Message-id: <1528412373-19128-2-git-send-email-rrichter@redhat.com>
Patchwork-id: 220950
O-Subject: [RHEL-8.0 BZ 1563590 v2 1/2] PCI: Vulcan: AHCI PCI bar fix for Broadcom Vulcan early silicon
Bugzilla: 1563590
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Ashok Kumar Sekar <asekar@redhat.com>
PCI BAR 5 is not setup correctly for the on-board AHCI
controller on Broadcom's Vulcan processor. Added a quirk to fix BAR 5
by using BAR 4's resources which are populated correctly but NOT used
by the AHCI controller actually.
RHEL-only:
Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
was discussed. Since there are partners with Ax system configurations it
was decided to carry them in RHEL8 too. See:
https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
Upstream Status: RHEL only
Signed-off-by: Ashok Kumar Sekar <asekar@redhat.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/pci/quirks.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
2022-02-07 08:12:40 +00:00
index 0663762ea69d..3f1215e8c5b2 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
2022-02-07 08:12:40 +00:00
@@ -4272,6 +4272,30 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000,
2021-11-06 14:19:23 +00:00
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084,
quirk_bridge_cavm_thrx2_pcie_root);
+/*
+ * PCI BAR 5 is not setup correctly for the on-board AHCI controller
+ * on Broadcom's Vulcan processor. Added a quirk to fix BAR 5 by
+ * using BAR 4's resources which are populated correctly and NOT
+ * actually used by the AHCI controller.
+ */
+static void quirk_fix_vulcan_ahci_bars(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[4];
+
+ if (!(r->flags & IORESOURCE_MEM) || (r->start == 0))
+ return;
+
+ /* Set BAR5 resource to BAR4 */
+ dev->resource[5] = *r;
+
+ /* Update BAR5 in pci config space */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, r->start);
+
+ /* Clear BAR4's resource */
+ memset(r, 0, sizeof(*r));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9027, quirk_fix_vulcan_ahci_bars);
+
/*
* Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero)
* class code. Fix it.
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Richter <rrichter@redhat.com>
Date: Thu, 7 Jun 2018 22:59:33 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 06/35] ahci: thunderx2: Fix for errata that affects stop
2021-11-06 14:19:23 +00:00
engine
Message-id: <1528412373-19128-3-git-send-email-rrichter@redhat.com>
Patchwork-id: 220952
O-Subject: [RHEL-8.0 BZ 1563590 v2 2/2] ahci: thunderx2: Fix for errata that affects stop engine
Bugzilla: 1563590
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Jayachandran C <jnair@caviumnetworks.com>
Apply workaround for this errata:
Synopsis: Resetting PxCMD.ST may hang the SATA device
Description: An internal ping-pong buffer state is not reset
correctly for an PxCMD.ST=0 command for a SATA channel. This
may cause the SATA interface to hang when a PxCMD.ST=0 command
is received.
Workaround: A SATA_BIU_CORE_ENABLE.sw_init_bsi must be asserted
by the driver whenever the PxCMD.ST needs to be de-asserted. This
will reset both the ports. So, it may not always work in a 2
channel SATA system.
Resolution: Fix in B0.
Add the code to ahci_stop_engine() to do this. It is not easy to
stop the other "port" since it is associated with a different AHCI
interface. Please note that with this fix, SATA reset does not
hang any more, but it can cause failures on the other interface
if that is in active use.
Unfortunately, we have nothing other the the CPU ID to check if the
SATA block has this issue.
RHEL-only:
Both patches are in RHEL-7.6 also. Inclusion of the patches into RHEL-8
was discussed. Since there are partners with Ax system configurations it
was decided to carry them in RHEL8 too. See:
https://bugzilla.redhat.com/show_bug.cgi?id=1563590#c1
[v3 with new delays]
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Upstream Status: RHEL only
Signed-off-by: Robert Richter <rrichter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
---
drivers/ata/libahci.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 395772fa3943..35aa1b420262 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -672,6 +672,24 @@ int ahci_stop_engine(struct ata_port *ap)
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
+#ifdef CONFIG_ARM64
+ /* Rev Ax of Cavium CN99XX needs a hack for port stop */
+ if (dev_is_pci(ap->host->dev) &&
+ to_pci_dev(ap->host->dev)->vendor == 0x14e4 &&
+ to_pci_dev(ap->host->dev)->device == 0x9027 &&
+ midr_is_cpu_model_range(read_cpuid_id(),
+ MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN),
+ MIDR_CPU_VAR_REV(0, 0),
+ MIDR_CPU_VAR_REV(0, MIDR_REVISION_MASK))) {
+ tmp = readl(hpriv->mmio + 0x8000);
+ udelay(100);
+ writel(tmp | (1 << 26), hpriv->mmio + 0x8000);
+ udelay(100);
+ writel(tmp & ~(1 << 26), hpriv->mmio + 0x8000);
+ dev_warn(ap->host->dev, "CN99XX SATA reset workaround applied\n");
+ }
+#endif
+
/* wait for engine to stop. This could be as long as 500 msec */
tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Sun, 10 Feb 2019 01:27:54 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 07/35] ipmi: do not configure ipmi for HPE m400
2021-11-06 14:19:23 +00:00
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1670017
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=20147017
Commit 913a89f009d9 ("ipmi: Don't initialize anything in the core until
something uses it") added new locking which broke context.
Message-id: <20180713142210.15700-1-tcamuso@redhat.com>
Patchwork-id: 224899
O-Subject: [RHEL8 BZ 1583537 1/1] ipmi: do not configure ipmi for HPE m400
Bugzilla: 1583537
RH-Acked-by: Dean Nelson <dnelson@redhat.com>
RH-Acked-by: Al Stone <ahs3@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
bugzilla:https://bugzilla.redhat.com/show_bug.cgi?id=1583537
brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=17150528
RHEL-only
The ARM-based HPE m400 reports host-side ipmi as residing in intel
port-io space, which does not exist in ARM processors. Therefore, when
running on an m400, host-side ipmi configuration code must simply return
zero without trying to configure the host-side ipmi.
This patch prevents panic on boot by averting attempts to configure
host-side ipmi on this platform.
Though HPE m400 is not certified with RHEL, and HPE has relegated it to
EOL status, the platform is still used extensively in ARM development
and test for RHEL.
Testing:
Boot without blacklisting ipmi and check to see that no ipmi modules
are loaded.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
cc: Prarit Bhargava <prarit@redhat.com>
cc: Brendan Conoboy <blc@redhat.com>
cc: Jeff Bastian <jbastian@redhat.com>
cc: Scott Herold <sherold@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Tony Camuso <tcamuso@redhat.com>
Acked-by: Dean Nelson <dnelson@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
---
drivers/char/ipmi/ipmi_dmi.c | 15 +++++++++++++++
drivers/char/ipmi/ipmi_msghandler.c | 16 +++++++++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/char/ipmi/ipmi_dmi.c b/drivers/char/ipmi/ipmi_dmi.c
index bbf7029e224b..cf7faa970dd6 100644
--- a/drivers/char/ipmi/ipmi_dmi.c
+++ b/drivers/char/ipmi/ipmi_dmi.c
@@ -215,6 +215,21 @@ static int __init scan_for_dmi_ipmi(void)
{
const struct dmi_device *dev = NULL;
+#ifdef CONFIG_ARM64
+ /* RHEL-only
+ * If this is ARM-based HPE m400, return now, because that platform
+ * reports the host-side ipmi address as intel port-io space, which
+ * does not exist in the ARM architecture.
+ */
+ const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+ pr_debug("%s does not support host ipmi\n", dmistr);
+ return 0;
+ }
+ /* END RHEL-only */
+#endif
+
while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev)))
dmi_decode_ipmi((const struct dmi_header *) dev->device_data);
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
2022-02-07 08:12:40 +00:00
index fe91090e04a4..f00bc6886913 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -35,6 +35,7 @@
#include <linux/uuid.h>
#include <linux/nospec.h>
#include <linux/vmalloc.h>
+#include <linux/dmi.h>
#include <linux/delay.h>
#define IPMI_DRIVER_VERSION "39.2"
2022-02-07 08:12:40 +00:00
@@ -5178,8 +5179,21 @@ static int __init ipmi_init_msghandler_mod(void)
2021-11-06 14:19:23 +00:00
{
int rv;
- pr_info("version " IPMI_DRIVER_VERSION "\n");
+#ifdef CONFIG_ARM64
+ /* RHEL-only
+ * If this is ARM-based HPE m400, return now, because that platform
+ * reports the host-side ipmi address as intel port-io space, which
+ * does not exist in the ARM architecture.
+ */
+ const char *dmistr = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (dmistr && (strcmp("ProLiant m400 Server", dmistr) == 0)) {
+ pr_debug("%s does not support host ipmi\n", dmistr);
+ return -ENOSYS;
+ }
+ /* END RHEL-only */
+#endif
+ pr_info("version " IPMI_DRIVER_VERSION "\n");
mutex_lock(&ipmi_interfaces_mutex);
rv = ipmi_register_driver();
mutex_unlock(&ipmi_interfaces_mutex);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Laura Abbott <labbott@redhat.com>
Date: Mon, 20 May 2019 22:21:02 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 08/35] iommu/arm-smmu: workaround DMA mode issues
2021-11-06 14:19:23 +00:00
Message-id: <20190520222102.19488-1-labbott@redhat.com>
Patchwork-id: 259215
O-Subject: [ARK INTERNAL PATCH] iommu/arm-smmu: workaround DMA mode issues
Bugzilla:
RH-Acked-by: Mark Langsdorf <mlangsdo@redhat.com>
RH-Acked-by: Mark Salter <msalter@redhat.com>
From: Mark Salter <msalter@redhat.com>
Rebased for v5.2-rc1
Bugzilla: 1652259
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=19244562
Upstream status: RHEL only.
rhel8 commit 65feb1ed0ec9a088a63a90d46c0f7563ac96ad0f
Author: Mark Salter <msalter@redhat.com>
Date: Wed Nov 21 17:15:59 2018 +0100
[iommu] iommu/arm-smmu: workaround DMA mode issues
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1624077
Brew: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=18112820
Testing: Verified iommu.passthrough=1 no longer needed on gigabyte platforms.
Upstream Status: RHEL-only
In RHEL_ALT 7.5 we carried a RHEL-only patch which forced the arm smmuv2
into bypass mode due to performance issues on CN88xx. This was intended
to be a temporary hack until the issues were resolved. Another vendor
had issues with the iommu in bypass mode so we reverted the RHEL-only
patch so that iommu is in DMA mode by default (upstream default).
It turns on that there are remaining SMMU DMA mode issues on Gigabyte
platformws with CN88xx cpus. The problem manifests itself by pcie
card drivers failing to initialize the cards when SMMU is in DMA mode.
The root cause has not been determined yet, but looks likely to be
a hw or firmware issue. This patch forces bypass mode for Gigabyte
platforms. CN88xx isn't officially supported in RHEL but we have a
lot of them being used internally for testing, so I think we want
this to support that use case in RHEL8.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Donald Dutile <ddutile@redhat.com>
Upstream Status: RHEL only
Signed-off-by: Laura Abbott <labbott@redhat.com>
---
drivers/iommu/iommu.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
2022-02-07 08:12:40 +00:00
index f62fb6a58f10..26ade573cec9 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -7,6 +7,7 @@
#define pr_fmt(fmt) "iommu: " fmt
#include <linux/device.h>
+#include <linux/dmi.h>
#include <linux/dma-iommu.h>
#include <linux/kernel.h>
#include <linux/bits.h>
2022-02-07 08:12:40 +00:00
@@ -3119,6 +3120,27 @@ u32 iommu_sva_get_pasid(struct iommu_sva *handle)
2021-11-06 14:19:23 +00:00
}
EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
+#ifdef CONFIG_ARM64
+static int __init iommu_quirks(void)
+{
+ const char *vendor, *name;
+
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ name = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+ if (vendor &&
+ (strncmp(vendor, "GIGABYTE", 8) == 0 && name &&
+ (strncmp(name, "R120", 4) == 0 ||
+ strncmp(name, "R270", 4) == 0))) {
+ pr_warn("Gigabyte %s detected, force iommu passthrough mode", name);
+ iommu_def_domain_type = IOMMU_DOMAIN_IDENTITY;
+ }
+
+ return 0;
+}
+arch_initcall(iommu_quirks);
+#endif
+
/*
* Changes the default domain of an iommu group that has *only* one device
*
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Tue, 1 Oct 2019 15:51:23 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 09/35] arm: aarch64: Drop the EXPERT setting from
2021-11-06 14:19:23 +00:00
ARM64_FORCE_52BIT
Message-id: <20191001181256.22935-1-jcline@redhat.com>
Patchwork-id: 275498
O-Subject: [ARK INTERNAL PATCH] [ARK INTERNAL PATCH] [redhat] Add patch
to drop the EXPERT setting from ARM64_FORCE_52BIT
Bugzilla:
RH-Acked-by: Laura Abbott <labbott@redhat.com>
We don't turn on EXPERT as there are few settings we actually want to
mess with. Remove the dependency for ARM64_FORCE_52BIT as we do want
that on in debug builds to help find 52-bit bugs.
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/arm64/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
2022-02-07 08:12:40 +00:00
index 0758ea0717f9..713f41c74024 100644
2021-11-06 14:19:23 +00:00
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -911,7 +911,7 @@ endchoice
config ARM64_FORCE_52BIT
bool "Force 52-bit virtual addresses for userspace"
- depends on ARM64_VA_BITS_52 && EXPERT
+ depends on ARM64_VA_BITS_52
help
For systems with 52-bit userspace VAs enabled, the kernel will attempt
to maintain compatibility with older software by providing 48-bit VAs
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Mon, 2 Oct 2017 18:22:13 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 10/35] Add efi_status_to_str() and rework efi_status_to_err().
2021-11-06 14:19:23 +00:00
This adds efi_status_to_str() for use when printing efi_status_t
messages, and reworks efi_status_to_err() so that the two use a common
list of errors.
Upstream Status: RHEL only
Signed-off-by: Peter Jones <pjones@redhat.com>
---
drivers/firmware/efi/efi.c | 124 +++++++++++++++++++++++++++----------
include/linux/efi.h | 3 +
2 files changed, 96 insertions(+), 31 deletions(-)
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 847f33ffc4ae..363037f8eaf8 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -31,6 +31,7 @@
#include <linux/ucs2_string.h>
#include <linux/memblock.h>
#include <linux/security.h>
+#include <linux/bsearch.h>
#include <asm/early_ioremap.h>
@@ -841,40 +842,101 @@ int efi_mem_type(unsigned long phys_addr)
}
#endif
+struct efi_error_code {
+ efi_status_t status;
+ int errno;
+ const char *description;
+};
+
+static const struct efi_error_code efi_error_codes[] = {
+ { EFI_SUCCESS, 0, "Success"},
+#if 0
+ { EFI_LOAD_ERROR, -EPICK_AN_ERRNO, "Load Error"},
+#endif
+ { EFI_INVALID_PARAMETER, -EINVAL, "Invalid Parameter"},
+ { EFI_UNSUPPORTED, -ENOSYS, "Unsupported"},
+ { EFI_BAD_BUFFER_SIZE, -ENOSPC, "Bad Buffer Size"},
+ { EFI_BUFFER_TOO_SMALL, -ENOSPC, "Buffer Too Small"},
+ { EFI_NOT_READY, -EAGAIN, "Not Ready"},
+ { EFI_DEVICE_ERROR, -EIO, "Device Error"},
+ { EFI_WRITE_PROTECTED, -EROFS, "Write Protected"},
+ { EFI_OUT_OF_RESOURCES, -ENOMEM, "Out of Resources"},
+#if 0
+ { EFI_VOLUME_CORRUPTED, -EPICK_AN_ERRNO, "Volume Corrupt"},
+ { EFI_VOLUME_FULL, -EPICK_AN_ERRNO, "Volume Full"},
+ { EFI_NO_MEDIA, -EPICK_AN_ERRNO, "No Media"},
+ { EFI_MEDIA_CHANGED, -EPICK_AN_ERRNO, "Media changed"},
+#endif
+ { EFI_NOT_FOUND, -ENOENT, "Not Found"},
+#if 0
+ { EFI_ACCESS_DENIED, -EPICK_AN_ERRNO, "Access Denied"},
+ { EFI_NO_RESPONSE, -EPICK_AN_ERRNO, "No Response"},
+ { EFI_NO_MAPPING, -EPICK_AN_ERRNO, "No mapping"},
+ { EFI_TIMEOUT, -EPICK_AN_ERRNO, "Time out"},
+ { EFI_NOT_STARTED, -EPICK_AN_ERRNO, "Not started"},
+ { EFI_ALREADY_STARTED, -EPICK_AN_ERRNO, "Already started"},
+#endif
+ { EFI_ABORTED, -EINTR, "Aborted"},
+#if 0
+ { EFI_ICMP_ERROR, -EPICK_AN_ERRNO, "ICMP Error"},
+ { EFI_TFTP_ERROR, -EPICK_AN_ERRNO, "TFTP Error"},
+ { EFI_PROTOCOL_ERROR, -EPICK_AN_ERRNO, "Protocol Error"},
+ { EFI_INCOMPATIBLE_VERSION, -EPICK_AN_ERRNO, "Incompatible Version"},
+#endif
+ { EFI_SECURITY_VIOLATION, -EACCES, "Security Policy Violation"},
+#if 0
+ { EFI_CRC_ERROR, -EPICK_AN_ERRNO, "CRC Error"},
+ { EFI_END_OF_MEDIA, -EPICK_AN_ERRNO, "End of Media"},
+ { EFI_END_OF_FILE, -EPICK_AN_ERRNO, "End of File"},
+ { EFI_INVALID_LANGUAGE, -EPICK_AN_ERRNO, "Invalid Languages"},
+ { EFI_COMPROMISED_DATA, -EPICK_AN_ERRNO, "Compromised Data"},
+
+ // warnings
+ { EFI_WARN_UNKOWN_GLYPH, -EPICK_AN_ERRNO, "Warning Unknown Glyph"},
+ { EFI_WARN_DELETE_FAILURE, -EPICK_AN_ERRNO, "Warning Delete Failure"},
+ { EFI_WARN_WRITE_FAILURE, -EPICK_AN_ERRNO, "Warning Write Failure"},
+ { EFI_WARN_BUFFER_TOO_SMALL, -EPICK_AN_ERRNO, "Warning Buffer Too Small"},
+#endif
+};
+
+static int
+efi_status_cmp_bsearch(const void *key, const void *item)
+{
+ u64 status = (u64)(uintptr_t)key;
+ struct efi_error_code *code = (struct efi_error_code *)item;
+
+ if (status < code->status)
+ return -1;
+ if (status > code->status)
+ return 1;
+ return 0;
+}
+
int efi_status_to_err(efi_status_t status)
{
- int err;
-
- switch (status) {
- case EFI_SUCCESS:
- err = 0;
- break;
- case EFI_INVALID_PARAMETER:
- err = -EINVAL;
- break;
- case EFI_OUT_OF_RESOURCES:
- err = -ENOSPC;
- break;
- case EFI_DEVICE_ERROR:
- err = -EIO;
- break;
- case EFI_WRITE_PROTECTED:
- err = -EROFS;
- break;
- case EFI_SECURITY_VIOLATION:
- err = -EACCES;
- break;
- case EFI_NOT_FOUND:
- err = -ENOENT;
- break;
- case EFI_ABORTED:
- err = -EINTR;
- break;
- default:
- err = -EINVAL;
- }
+ struct efi_error_code *found;
+ size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
- return err;
+ found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+ sizeof(struct efi_error_code), num,
+ efi_status_cmp_bsearch);
+ if (!found)
+ return -EINVAL;
+ return found->errno;
+}
+
+const char *
+efi_status_to_str(efi_status_t status)
+{
+ struct efi_error_code *found;
+ size_t num = sizeof(efi_error_codes) / sizeof(struct efi_error_code);
+
+ found = bsearch((void *)(uintptr_t)status, efi_error_codes,
+ sizeof(struct efi_error_code), num,
+ efi_status_cmp_bsearch);
+ if (!found)
+ return "Unknown error code";
+ return found->description;
}
static DEFINE_SPINLOCK(efi_mem_reserve_persistent_lock);
diff --git a/include/linux/efi.h b/include/linux/efi.h
2022-02-07 08:12:40 +00:00
index 3d8ddc5eca8c..7aad9fc10338 100644
2021-11-06 14:19:23 +00:00
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -43,6 +43,8 @@
#define EFI_ABORTED (21 | (1UL << (BITS_PER_LONG-1)))
#define EFI_SECURITY_VIOLATION (26 | (1UL << (BITS_PER_LONG-1)))
+#define EFI_IS_ERROR(x) ((x) & (1UL << (BITS_PER_LONG-1)))
+
typedef unsigned long efi_status_t;
typedef u8 efi_bool_t;
typedef u16 efi_char16_t; /* UNICODE character */
@@ -825,6 +827,7 @@ static inline bool efi_rt_services_supported(unsigned int mask)
#endif
extern int efi_status_to_err(efi_status_t status);
+extern const char *efi_status_to_str(efi_status_t status);
/*
* Variable Attributes
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Mon, 2 Oct 2017 18:18:30 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 11/35] Make get_cert_list() use efi_status_to_str() to print
2021-11-06 14:19:23 +00:00
error messages.
Upstream Status: RHEL only
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
security/integrity/platform_certs/load_uefi.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/security/integrity/platform_certs/load_uefi.c b/security/integrity/platform_certs/load_uefi.c
index f290f78c3f30..d3e7ae04f5be 100644
--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -46,7 +46,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
return NULL;
if (*status != EFI_BUFFER_TOO_SMALL) {
- pr_err("Couldn't get size: 0x%lx\n", *status);
+ pr_err("Couldn't get size: %s (0x%lx)\n",
+ efi_status_to_str(*status), *status);
return NULL;
}
@@ -57,7 +58,8 @@ static __init void *get_cert_list(efi_char16_t *name, efi_guid_t *guid,
*status = efi.get_variable(name, guid, NULL, &lsize, db);
if (*status != EFI_SUCCESS) {
kfree(db);
- pr_err("Error reading db var: 0x%lx\n", *status);
+ pr_err("Error reading db var: %s (0x%lx)\n",
+ efi_status_to_str(*status), *status);
return NULL;
}
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Mon, 30 Sep 2019 21:22:47 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 12/35] security: lockdown: expose a hook to lock the kernel
2021-11-06 14:19:23 +00:00
down
In order to automatically lock down kernels running on UEFI machines
booted in Secure Boot mode, expose the lock_kernel_down() hook.
Upstream Status: RHEL only
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
include/linux/lsm_hook_defs.h | 2 ++
include/linux/lsm_hooks.h | 6 ++++++
include/linux/security.h | 5 +++++
security/lockdown/lockdown.c | 1 +
security/security.c | 6 ++++++
5 files changed, 20 insertions(+)
diff --git a/include/linux/lsm_hook_defs.h b/include/linux/lsm_hook_defs.h
index 61590c1f2d33..4c10750865c2 100644
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -394,6 +394,8 @@ LSM_HOOK(void, LSM_RET_VOID, bpf_prog_free_security, struct bpf_prog_aux *aux)
#endif /* CONFIG_BPF_SYSCALL */
LSM_HOOK(int, 0, locked_down, enum lockdown_reason what)
+LSM_HOOK(int, 0, lock_kernel_down, const char *where, enum lockdown_reason level)
+
#ifdef CONFIG_PERF_EVENTS
LSM_HOOK(int, 0, perf_event_open, struct perf_event_attr *attr, int type)
diff --git a/include/linux/lsm_hooks.h b/include/linux/lsm_hooks.h
index 59024618554e..ab9ca4d393da 100644
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1545,6 +1545,12 @@
*
* @what: kernel feature being accessed
*
+ * @lock_kernel_down
+ * Put the kernel into lock-down mode.
+ *
+ * @where: Where the lock-down is originating from (e.g. command line option)
+ * @level: The lock-down level (can only increase)
+ *
* Security hooks for perf events
*
* @perf_event_open:
diff --git a/include/linux/security.h b/include/linux/security.h
index 46a02ce34d00..37e991a10d70 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -472,6 +472,7 @@ int security_inode_notifysecctx(struct inode *inode, void *ctx, u32 ctxlen);
int security_inode_setsecctx(struct dentry *dentry, void *ctx, u32 ctxlen);
int security_inode_getsecctx(struct inode *inode, void **ctx, u32 *ctxlen);
int security_locked_down(enum lockdown_reason what);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level);
#else /* CONFIG_SECURITY */
static inline int call_blocking_lsm_notifier(enum lsm_event event, void *data)
@@ -1353,6 +1354,10 @@ static inline int security_locked_down(enum lockdown_reason what)
{
return 0;
}
+static inline int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+ return 0;
+}
#endif /* CONFIG_SECURITY */
#if defined(CONFIG_SECURITY) && defined(CONFIG_WATCH_QUEUE)
diff --git a/security/lockdown/lockdown.c b/security/lockdown/lockdown.c
index 87cbdc64d272..18555cf18da7 100644
--- a/security/lockdown/lockdown.c
+++ b/security/lockdown/lockdown.c
@@ -73,6 +73,7 @@ static int lockdown_is_locked_down(enum lockdown_reason what)
static struct security_hook_list lockdown_hooks[] __lsm_ro_after_init = {
LSM_HOOK_INIT(locked_down, lockdown_is_locked_down),
+ LSM_HOOK_INIT(lock_kernel_down, lock_kernel_down),
};
static int __init lockdown_lsm_init(void)
diff --git a/security/security.c b/security/security.c
index 67264cb08fb3..85a0227bfac1 100644
--- a/security/security.c
+++ b/security/security.c
@@ -2599,6 +2599,12 @@ int security_locked_down(enum lockdown_reason what)
}
EXPORT_SYMBOL(security_locked_down);
+int security_lock_kernel_down(const char *where, enum lockdown_reason level)
+{
+ return call_int_hook(lock_kernel_down, 0, where, level);
+}
+EXPORT_SYMBOL(security_lock_kernel_down);
+
#ifdef CONFIG_PERF_EVENTS
int security_perf_event_open(struct perf_event_attr *attr, int type)
{
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 27 Feb 2018 10:04:55 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 13/35] efi: Add an EFI_SECURE_BOOT flag to indicate secure
2021-11-06 14:19:23 +00:00
boot mode
UEFI machines can be booted in Secure Boot mode. Add an EFI_SECURE_BOOT
flag that can be passed to efi_enabled() to find out whether secure boot is
enabled.
Move the switch-statement in x86's setup_arch() that inteprets the
secure_boot boot parameter to generic code and set the bit there.
Upstream Status: RHEL only
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
cc: linux-efi@vger.kernel.org
[Rebased for context; efi_is_table_address was moved to arch/x86]
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/x86/kernel/setup.c | 14 +-----------
drivers/firmware/efi/Makefile | 1 +
drivers/firmware/efi/secureboot.c | 38 +++++++++++++++++++++++++++++++
include/linux/efi.h | 19 ++++++++++------
4 files changed, 52 insertions(+), 20 deletions(-)
create mode 100644 drivers/firmware/efi/secureboot.c
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
2022-02-07 08:12:40 +00:00
index 48596f9fddf4..a34abc4ce94f 100644
2021-11-06 14:19:23 +00:00
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
2022-02-07 08:12:40 +00:00
@@ -1094,19 +1094,7 @@ void __init setup_arch(char **cmdline_p)
2021-11-06 14:19:23 +00:00
/* Allocate bigger log buffer */
setup_log_buf(1);
- if (efi_enabled(EFI_BOOT)) {
- switch (boot_params.secure_boot) {
- case efi_secureboot_mode_disabled:
- pr_info("Secure boot disabled\n");
- break;
- case efi_secureboot_mode_enabled:
- pr_info("Secure boot enabled\n");
- break;
- default:
- pr_info("Secure boot could not be determined\n");
- break;
- }
- }
+ efi_set_secure_boot(boot_params.secure_boot);
reserve_initrd();
diff --git a/drivers/firmware/efi/Makefile b/drivers/firmware/efi/Makefile
index c02ff25dd477..d860f8eb9a81 100644
--- a/drivers/firmware/efi/Makefile
+++ b/drivers/firmware/efi/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_EFI_FAKE_MEMMAP) += fake_map.o
obj-$(CONFIG_EFI_BOOTLOADER_CONTROL) += efibc.o
obj-$(CONFIG_EFI_TEST) += test/
obj-$(CONFIG_EFI_DEV_PATH_PARSER) += dev-path-parser.o
+obj-$(CONFIG_EFI) += secureboot.o
obj-$(CONFIG_APPLE_PROPERTIES) += apple-properties.o
obj-$(CONFIG_EFI_RCI2_TABLE) += rci2-table.o
obj-$(CONFIG_EFI_EMBEDDED_FIRMWARE) += embedded-firmware.o
diff --git a/drivers/firmware/efi/secureboot.c b/drivers/firmware/efi/secureboot.c
new file mode 100644
index 000000000000..de0a3714a5d4
--- /dev/null
+++ b/drivers/firmware/efi/secureboot.c
@@ -0,0 +1,38 @@
+/* Core kernel secure boot support.
+ *
+ * Copyright (C) 2017 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+
+/*
+ * Decide what to do when UEFI secure boot mode is enabled.
+ */
+void __init efi_set_secure_boot(enum efi_secureboot_mode mode)
+{
+ if (efi_enabled(EFI_BOOT)) {
+ switch (mode) {
+ case efi_secureboot_mode_disabled:
+ pr_info("Secure boot disabled\n");
+ break;
+ case efi_secureboot_mode_enabled:
+ set_bit(EFI_SECURE_BOOT, &efi.flags);
+ pr_info("Secure boot enabled\n");
+ break;
+ default:
+ pr_warn("Secure boot could not be determined (mode %u)\n",
+ mode);
+ break;
+ }
+ }
+}
diff --git a/include/linux/efi.h b/include/linux/efi.h
2022-02-07 08:12:40 +00:00
index 7aad9fc10338..779f41901f35 100644
2021-11-06 14:19:23 +00:00
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -784,6 +784,14 @@ extern int __init efi_setup_pcdp_console(char *);
#define EFI_MEM_ATTR 10 /* Did firmware publish an EFI_MEMORY_ATTRIBUTES table? */
#define EFI_MEM_NO_SOFT_RESERVE 11 /* Is the kernel configured to ignore soft reservations? */
#define EFI_PRESERVE_BS_REGIONS 12 /* Are EFI boot-services memory segments available? */
+#define EFI_SECURE_BOOT 13 /* Are we in Secure Boot mode? */
+
+enum efi_secureboot_mode {
+ efi_secureboot_mode_unset,
+ efi_secureboot_mode_unknown,
+ efi_secureboot_mode_disabled,
+ efi_secureboot_mode_enabled,
+};
#ifdef CONFIG_EFI
/*
@@ -795,6 +803,8 @@ static inline bool efi_enabled(int feature)
}
extern void efi_reboot(enum reboot_mode reboot_mode, const char *__unused);
+extern void __init efi_set_secure_boot(enum efi_secureboot_mode mode);
+
bool __pure __efi_soft_reserve_enabled(void);
static inline bool __pure efi_soft_reserve_enabled(void)
@@ -815,6 +825,8 @@ static inline bool efi_enabled(int feature)
static inline void
efi_reboot(enum reboot_mode reboot_mode, const char *__unused) {}
+static inline void efi_set_secure_boot(enum efi_secureboot_mode mode) {}
+
static inline bool efi_soft_reserve_enabled(void)
{
return false;
@@ -1080,13 +1092,6 @@ static inline bool efi_runtime_disabled(void) { return true; }
extern void efi_call_virt_check_flags(unsigned long flags, const char *call);
extern unsigned long efi_call_virt_save_flags(void);
-enum efi_secureboot_mode {
- efi_secureboot_mode_unset,
- efi_secureboot_mode_unknown,
- efi_secureboot_mode_disabled,
- efi_secureboot_mode_enabled,
-};
-
static inline
enum efi_secureboot_mode efi_get_secureboot_mode(efi_get_variable_t *get_var)
{
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 30 Sep 2019 21:28:16 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 14/35] efi: Lock down the kernel if booted in secure boot mode
2021-11-06 14:19:23 +00:00
UEFI Secure Boot provides a mechanism for ensuring that the firmware
will only load signed bootloaders and kernels. Certain use cases may
also require that all kernel modules also be signed. Add a
configuration option that to lock down the kernel - which includes
requiring validly signed modules - if the kernel is secure-booted.
Upstream Status: RHEL only
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/x86/kernel/setup.c | 8 ++++++++
security/lockdown/Kconfig | 13 +++++++++++++
2 files changed, 21 insertions(+)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
2022-02-07 08:12:40 +00:00
index a34abc4ce94f..b31d4f581b66 100644
2021-11-06 14:19:23 +00:00
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/root_dev.h>
#include <linux/hugetlb.h>
#include <linux/tboot.h>
+#include <linux/security.h>
#include <linux/usb/xhci-dbgp.h>
#include <linux/static_call.h>
#include <linux/swiotlb.h>
2022-02-07 08:12:40 +00:00
@@ -929,6 +930,13 @@ void __init setup_arch(char **cmdline_p)
2021-11-06 14:19:23 +00:00
if (efi_enabled(EFI_BOOT))
efi_init();
+ efi_set_secure_boot(boot_params.secure_boot);
+
+#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT
+ if (efi_enabled(EFI_SECURE_BOOT))
+ security_lock_kernel_down("EFI Secure Boot mode", LOCKDOWN_INTEGRITY_MAX);
+#endif
+
dmi_setup();
/*
diff --git a/security/lockdown/Kconfig b/security/lockdown/Kconfig
index e84ddf484010..d0501353a4b9 100644
--- a/security/lockdown/Kconfig
+++ b/security/lockdown/Kconfig
@@ -16,6 +16,19 @@ config SECURITY_LOCKDOWN_LSM_EARLY
subsystem is fully initialised. If enabled, lockdown will
unconditionally be called before any other LSMs.
+config LOCK_DOWN_IN_EFI_SECURE_BOOT
+ bool "Lock down the kernel in EFI Secure Boot mode"
+ default n
+ depends on EFI && SECURITY_LOCKDOWN_LSM_EARLY
+ help
+ UEFI Secure Boot provides a mechanism for ensuring that the firmware
+ will only load signed bootloaders and kernels. Secure boot mode may
+ be determined from EFI variables provided by the system firmware if
+ not indicated by the boot parameters.
+
+ Enabling this option results in kernel lockdown being triggered if
+ EFI Secure Boot is set.
+
choice
prompt "Kernel default lockdown mode"
default LOCK_DOWN_KERNEL_FORCE_NONE
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Cline <jcline@redhat.com>
Date: Wed, 30 Oct 2019 14:37:49 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 15/35] s390: Lock down the kernel when the IPL secure flag is
2021-11-06 14:19:23 +00:00
set
Automatically lock down the kernel to LOCKDOWN_CONFIDENTIALITY_MAX if
the IPL secure flag is set.
Upstream Status: RHEL only
Suggested-by: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/s390/include/asm/ipl.h | 1 +
arch/s390/kernel/ipl.c | 5 +++++
arch/s390/kernel/setup.c | 4 ++++
3 files changed, 10 insertions(+)
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 3f8ee257f9aa..3ab92feb6241 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -128,6 +128,7 @@ int ipl_report_add_component(struct ipl_report *report, struct kexec_buf *kbuf,
unsigned char flags, unsigned short cert);
int ipl_report_add_certificate(struct ipl_report *report, void *key,
unsigned long addr, unsigned long len);
+bool ipl_get_secureboot(void);
/*
* DIAG 308 support
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 5ad1dde23dc5..b6192d58eed3 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2216,3 +2216,8 @@ int ipl_report_free(struct ipl_report *report)
}
#endif
+
+bool ipl_get_secureboot(void)
+{
+ return !!ipl_secure_flag;
+}
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ee67215a678a..931955a9ceca 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -49,6 +49,7 @@
#include <linux/memory.h>
#include <linux/compat.h>
#include <linux/start_kernel.h>
+#include <linux/security.h>
#include <linux/hugetlb.h>
#include <linux/kmemleak.h>
@@ -970,6 +971,9 @@ void __init setup_arch(char **cmdline_p)
log_component_list();
+ if (ipl_get_secureboot())
+ security_lock_kernel_down("Secure IPL mode", LOCKDOWN_INTEGRITY_MAX);
+
/* Have one command line that is parsed and saved in /proc/cmdline */
/* boot_command_line has been already set up in early.c */
*cmdline_p = boot_command_line;
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Wed, 26 Feb 2020 13:38:40 -0500
2022-02-07 08:12:40 +00:00
Subject: [PATCH 16/35] Add option of 13 for FORCE_MAX_ZONEORDER
2021-11-06 14:19:23 +00:00
This is a hack, but it's what the other distros currently use
for aarch64 with 4K pages so we'll do the same while upstream
decides what the best outcome is (which isn't this).
Upstream Status: RHEL only
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
[Add a dependency on RHEL_DIFFERENCES]
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
arch/arm64/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
2022-02-07 08:12:40 +00:00
index 713f41c74024..5be7713a5ca0 100644
2021-11-06 14:19:23 +00:00
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1152,6 +1152,7 @@ config XEN
config FORCE_MAX_ZONEORDER
int
default "14" if ARM64_64K_PAGES
+ default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES && !RHEL_DIFFERENCES)
default "12" if ARM64_16K_PAGES
default "11"
help
--
2.31.1
2021-12-21 11:38:49 +00:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 26 Aug 2021 10:59:23 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 17/35] arm64: use common CONFIG_MAX_ZONEORDER for arm kernel
2021-12-21 11:38:49 +00:00
Now that RHEL9 is using 4K pagesize, MAX_ZONEORDER is defaulting
to 11. Fedora uses an out of tree patch to default to 13 when
building for server class machines. RHEL9 should also be using 13,
so make the MAX_ZONEORDER config and the out of tree patch common
between RHEL9 and Fedora.
Signed-off-by: Mark Salter <msalter@redhat.com>
---
arch/arm64/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
2022-02-07 08:12:40 +00:00
index 5be7713a5ca0..fb57b7a992d4 100644
2021-12-21 11:38:49 +00:00
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1152,7 +1152,7 @@ config XEN
config FORCE_MAX_ZONEORDER
int
default "14" if ARM64_64K_PAGES
- default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES && !RHEL_DIFFERENCES)
+ default "13" if (ARCH_THUNDER && !ARM64_64K_PAGES)
default "12" if ARM64_16K_PAGES
default "11"
help
--
2.31.1
2021-11-06 14:19:23 +00:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jon Masters <jcm@redhat.com>
Date: Thu, 18 Jul 2019 15:47:26 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 18/35] arm: make CONFIG_HIGHPTE optional without CONFIG_EXPERT
2021-11-06 14:19:23 +00:00
We will use this to force CONFIG_HIGHPTE off on LPAE for now
Signed-off-by: Jon Masters <jcm@redhat.com>
---
arch/arm/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4ebd512043be..6743668b7b33 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1471,9 +1471,9 @@ config HIGHMEM
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem" if EXPERT
+ bool "Allocate 2nd-level pagetables from highmem"
depends on HIGHMEM
- default y
+ default n
help
The VM uses one page of physical memory for each page table.
For systems with a lot of processes, this can use a lot of
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Thu, 3 May 2012 20:27:11 +0100
2022-02-07 08:12:40 +00:00
Subject: [PATCH 19/35] ARM: tegra: usb no reset
2021-11-06 14:19:23 +00:00
Patch for disconnect issues with storage attached to a
tegra-ehci controller
---
drivers/usb/core/hub.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
2022-02-07 08:12:40 +00:00
index ac6c5ccfe1cb..ec784479eece 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
2022-02-07 08:12:40 +00:00
@@ -5669,6 +5669,13 @@ static void hub_event(struct work_struct *work)
2021-11-06 14:19:23 +00:00
(u16) hub->change_bits[0],
(u16) hub->event_bits[0]);
+ /* Don't disconnect USB-SATA on TrimSlice */
+ if (strcmp(dev_name(hdev->bus->controller), "tegra-ehci.0") == 0) {
+ if ((hdev->state == 7) && (hub->change_bits[0] == 0) &&
+ (hub->event_bits[0] == 0x2))
+ hub->event_bits[0] = 0;
+ }
+
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
usb_lock_device(hdev);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Date: Mon, 3 Apr 2017 18:18:21 +0200
2022-02-07 08:12:40 +00:00
Subject: [PATCH 20/35] Input: rmi4 - remove the need for artificial IRQ in
2021-11-06 14:19:23 +00:00
case of HID
The IRQ from rmi4 may interfere with the one we currently use on i2c-hid.
Given that there is already a need for an external API from rmi4 to
forward the attention data, we can, in this particular case rely on a
separate workqueue to prevent cursor jumps.
Reported-by: Cameron Gutman <aicommander@gmail.com>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Reported-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Lyude <lyude@redhat.com>
---
drivers/hid/hid-rmi.c | 64 -----------------
drivers/input/rmi4/rmi_driver.c | 124 +++++++++++++++++++-------------
include/linux/rmi.h | 1 +
3 files changed, 75 insertions(+), 114 deletions(-)
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 311eee599ce9..2460c6bd46f8 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -322,19 +322,12 @@ static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
{
struct rmi_data *hdata = hid_get_drvdata(hdev);
struct rmi_device *rmi_dev = hdata->xport.rmi_dev;
- unsigned long flags;
if (!(test_bit(RMI_STARTED, &hdata->flags)))
return 0;
- local_irq_save(flags);
-
rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2);
- generic_handle_irq(hdata->rmi_irq);
-
- local_irq_restore(flags);
-
return 1;
}
@@ -591,56 +584,6 @@ static const struct rmi_transport_ops hid_rmi_ops = {
.reset = rmi_hid_reset,
};
-static void rmi_irq_teardown(void *data)
-{
- struct rmi_data *hdata = data;
- struct irq_domain *domain = hdata->domain;
-
- if (!domain)
- return;
-
- irq_dispose_mapping(irq_find_mapping(domain, 0));
-
- irq_domain_remove(domain);
- hdata->domain = NULL;
- hdata->rmi_irq = 0;
-}
-
-static int rmi_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw_irq_num)
-{
- irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq);
-
- return 0;
-}
-
-static const struct irq_domain_ops rmi_irq_ops = {
- .map = rmi_irq_map,
-};
-
-static int rmi_setup_irq_domain(struct hid_device *hdev)
-{
- struct rmi_data *hdata = hid_get_drvdata(hdev);
- int ret;
-
- hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1,
- &rmi_irq_ops, hdata);
- if (!hdata->domain)
- return -ENOMEM;
-
- ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata);
- if (ret)
- return ret;
-
- hdata->rmi_irq = irq_create_mapping(hdata->domain, 0);
- if (hdata->rmi_irq <= 0) {
- hid_err(hdev, "Can't allocate an IRQ\n");
- return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO;
- }
-
- return 0;
-}
-
static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct rmi_data *data = NULL;
@@ -713,18 +656,11 @@ static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
mutex_init(&data->page_mutex);
- ret = rmi_setup_irq_domain(hdev);
- if (ret) {
- hid_err(hdev, "failed to allocate IRQ domain\n");
- return ret;
- }
-
if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)
rmi_hid_pdata.gpio_data.disable = true;
data->xport.dev = hdev->dev.parent;
data->xport.pdata = rmi_hid_pdata;
- data->xport.pdata.irq = data->rmi_irq;
data->xport.proto_name = "hid";
data->xport.ops = &hid_rmi_ops;
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 258d5fe3d395..f7298e3dc8f3 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -182,34 +182,47 @@ void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
attn_data.data = fifo_data;
kfifo_put(&drvdata->attn_fifo, attn_data);
+
+ schedule_work(&drvdata->attn_work);
}
EXPORT_SYMBOL_GPL(rmi_set_attn_data);
-static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+static void attn_callback(struct work_struct *work)
{
- struct rmi_device *rmi_dev = dev_id;
- struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+ struct rmi_driver_data *drvdata = container_of(work,
+ struct rmi_driver_data,
+ attn_work);
struct rmi4_attn_data attn_data = {0};
int ret, count;
count = kfifo_get(&drvdata->attn_fifo, &attn_data);
- if (count) {
- *(drvdata->irq_status) = attn_data.irq_status;
- drvdata->attn_data = attn_data;
- }
+ if (!count)
+ return;
- ret = rmi_process_interrupt_requests(rmi_dev);
+ *(drvdata->irq_status) = attn_data.irq_status;
+ drvdata->attn_data = attn_data;
+
+ ret = rmi_process_interrupt_requests(drvdata->rmi_dev);
if (ret)
- rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+ rmi_dbg(RMI_DEBUG_CORE, &drvdata->rmi_dev->dev,
"Failed to process interrupt request: %d\n", ret);
- if (count) {
- kfree(attn_data.data);
- drvdata->attn_data.data = NULL;
- }
+ kfree(attn_data.data);
+ drvdata->attn_data.data = NULL;
if (!kfifo_is_empty(&drvdata->attn_fifo))
- return rmi_irq_fn(irq, dev_id);
+ schedule_work(&drvdata->attn_work);
+}
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+ struct rmi_device *rmi_dev = dev_id;
+ int ret;
+
+ ret = rmi_process_interrupt_requests(rmi_dev);
+ if (ret)
+ rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+ "Failed to process interrupt request: %d\n", ret);
return IRQ_HANDLED;
}
@@ -217,7 +230,6 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
static int rmi_irq_init(struct rmi_device *rmi_dev)
{
struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
- struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
int irq_flags = irq_get_trigger_type(pdata->irq);
int ret;
@@ -235,8 +247,6 @@ static int rmi_irq_init(struct rmi_device *rmi_dev)
return ret;
}
- data->enabled = true;
-
return 0;
}
@@ -886,23 +896,27 @@ void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
if (data->enabled)
goto out;
- enable_irq(irq);
- data->enabled = true;
- if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
- retval = disable_irq_wake(irq);
- if (retval)
- dev_warn(&rmi_dev->dev,
- "Failed to disable irq for wake: %d\n",
- retval);
- }
+ if (irq) {
+ enable_irq(irq);
+ data->enabled = true;
+ if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+ retval = disable_irq_wake(irq);
+ if (retval)
+ dev_warn(&rmi_dev->dev,
+ "Failed to disable irq for wake: %d\n",
+ retval);
+ }
- /*
- * Call rmi_process_interrupt_requests() after enabling irq,
- * otherwise we may lose interrupt on edge-triggered systems.
- */
- irq_flags = irq_get_trigger_type(pdata->irq);
- if (irq_flags & IRQ_TYPE_EDGE_BOTH)
- rmi_process_interrupt_requests(rmi_dev);
+ /*
+ * Call rmi_process_interrupt_requests() after enabling irq,
+ * otherwise we may lose interrupt on edge-triggered systems.
+ */
+ irq_flags = irq_get_trigger_type(pdata->irq);
+ if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+ rmi_process_interrupt_requests(rmi_dev);
+ } else {
+ data->enabled = true;
+ }
out:
mutex_unlock(&data->enabled_mutex);
@@ -922,20 +936,22 @@ void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
goto out;
data->enabled = false;
- disable_irq(irq);
- if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
- retval = enable_irq_wake(irq);
- if (retval)
- dev_warn(&rmi_dev->dev,
- "Failed to enable irq for wake: %d\n",
- retval);
- }
-
- /* make sure the fifo is clean */
- while (!kfifo_is_empty(&data->attn_fifo)) {
- count = kfifo_get(&data->attn_fifo, &attn_data);
- if (count)
- kfree(attn_data.data);
+ if (irq) {
+ disable_irq(irq);
+ if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+ retval = enable_irq_wake(irq);
+ if (retval)
+ dev_warn(&rmi_dev->dev,
+ "Failed to enable irq for wake: %d\n",
+ retval);
+ }
+ } else {
+ /* make sure the fifo is clean */
+ while (!kfifo_is_empty(&data->attn_fifo)) {
+ count = kfifo_get(&data->attn_fifo, &attn_data);
+ if (count)
+ kfree(attn_data.data);
+ }
}
out:
@@ -981,6 +997,8 @@ static int rmi_driver_remove(struct device *dev)
irq_domain_remove(data->irqdomain);
data->irqdomain = NULL;
+ cancel_work_sync(&data->attn_work);
+
rmi_f34_remove_sysfs(rmi_dev);
rmi_free_function_list(rmi_dev);
@@ -1219,9 +1237,15 @@ static int rmi_driver_probe(struct device *dev)
}
}
- retval = rmi_irq_init(rmi_dev);
- if (retval < 0)
- goto err_destroy_functions;
+ if (pdata->irq) {
+ retval = rmi_irq_init(rmi_dev);
+ if (retval < 0)
+ goto err_destroy_functions;
+ }
+
+ data->enabled = true;
+
+ INIT_WORK(&data->attn_work, attn_callback);
if (data->f01_container->dev.driver) {
/* Driver already bound, so enable ATTN now. */
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index ab7eea01ab42..fff7c5f737fc 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -364,6 +364,7 @@ struct rmi_driver_data {
struct rmi4_attn_data attn_data;
DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
+ struct work_struct attn_work;
};
int rmi_register_transport_device(struct rmi_transport_dev *xport);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Robert Holmes <robeholmes@gmail.com>
Date: Tue, 23 Apr 2019 07:39:29 +0000
2022-02-07 08:12:40 +00:00
Subject: [PATCH 21/35] KEYS: Make use of platform keyring for module signature
2021-11-06 14:19:23 +00:00
verify
This patch completes commit 278311e417be ("kexec, KEYS: Make use of
platform keyring for signature verify") which, while adding the
platform keyring for bzImage verification, neglected to also add
this keyring for module verification.
As such, kernel modules signed with keys from the MokList variable
were not successfully verified.
Signed-off-by: Robert Holmes <robeholmes@gmail.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
kernel/module_signing.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/kernel/module_signing.c b/kernel/module_signing.c
index 8723ae70ea1f..fb2d773498c2 100644
--- a/kernel/module_signing.c
+++ b/kernel/module_signing.c
@@ -38,8 +38,15 @@ int mod_verify_sig(const void *mod, struct load_info *info)
modlen -= sig_len + sizeof(ms);
info->len = modlen;
- return verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+ ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
VERIFY_USE_SECONDARY_KEYRING,
VERIFYING_MODULE_SIGNATURE,
NULL, NULL);
+ if (ret == -ENOKEY && IS_ENABLED(CONFIG_INTEGRITY_PLATFORM_KEYRING)) {
+ ret = verify_pkcs7_signature(mod, modlen, mod + modlen, sig_len,
+ VERIFY_USE_PLATFORM_KEYRING,
+ VERIFYING_MODULE_SIGNATURE,
+ NULL, NULL);
+ }
+ return ret;
}
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jeremy Linton <jeremy.linton@arm.com>
Date: Thu, 11 Mar 2021 22:15:13 -0600
2022-02-07 08:12:40 +00:00
Subject: [PATCH 22/35] REDHAT: coresight: etm4x: Disable coresight on HPE
2021-11-06 14:19:23 +00:00
Apollo 70
bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1918888
The coresight tables on the latest Apollo 70, appear to be
damaged sufficiently to throw a few hundred lines of back-traces
during boot, lets disable it until we can get a firmware fix.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
cc: Peter Robinson <pbrobinson@redhat.com>
cc: Justin M. Forbes <jforbes@fedoraproject.org>
cc: Al Stone <ahs3@redhat.com>
---
.../coresight/coresight-etm4x-core.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
index e24252eaf8e4..368d64adeee8 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
+#include <linux/dmi.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/fs.h>
@@ -2105,6 +2106,16 @@ static const struct amba_id etm4_ids[] = {
{},
};
+static const struct dmi_system_id broken_coresight[] = {
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HPE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Apollo 70"),
+ },
+ },
+ { } /* terminating entry */
+};
+
MODULE_DEVICE_TABLE(amba, etm4_ids);
static struct amba_driver etm4x_amba_driver = {
@@ -2138,6 +2149,11 @@ static int __init etm4x_init(void)
{
int ret;
+ if (dmi_check_system(broken_coresight)) {
+ pr_info("ETM4 disabled due to firmware bug\n");
+ return 0;
+ }
+
ret = etm4_pm_setup();
/* etm4_pm_setup() does its own cleanup - exit on error */
@@ -2164,6 +2180,9 @@ static int __init etm4x_init(void)
static void __exit etm4x_exit(void)
{
+ if (dmi_check_system(broken_coresight))
+ return;
+
amba_driver_unregister(&etm4x_amba_driver);
platform_driver_unregister(&etm4_platform_driver);
etm4_pm_clear();
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Tue, 13 Apr 2021 13:09:36 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 23/35] nvme: Return BLK_STS_TARGET if the DNR bit is set
2021-11-06 14:19:23 +00:00
BZ: 1948690
Upstream Status: RHEL-only
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
rhel-8.git commit ef4ab90c12db5e0e50800ec323736b95be7a6ff5
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue Aug 25 21:52:45 2020 -0400
[nvme] nvme: Return BLK_STS_TARGET if the DNR bit is set
Message-id: <20200825215248.2291-8-snitzer@redhat.com>
Patchwork-id: 325178
Patchwork-instance: patchwork
O-Subject: [RHEL8.3 PATCH 07/10] nvme: Return BLK_STS_TARGET if the DNR bit is set
Bugzilla: 1843515
RH-Acked-by: David Milburn <dmilburn@redhat.com>
RH-Acked-by: Gopal Tiwari <gtiwari@redhat.com>
RH-Acked-by: Ewan Milne <emilne@redhat.com>
BZ: 1843515
Upstream Status: RHEL-only
If the DNR bit is set we should not retry the command, even if
the standard status evaluation indicates so.
SUSE is carrying this patch in their kernel:
https://lwn.net/Articles/800370/
Based on patch posted for upstream inclusion but rejected:
v1: https://lore.kernel.org/linux-nvme/20190806111036.113233-1-hare@suse.de/
v2: https://lore.kernel.org/linux-nvme/20190807071208.101882-1-hare@suse.de/
v2-keith: https://lore.kernel.org/linux-nvme/20190807144725.GB25621@localhost.localdomain/
v3: https://lore.kernel.org/linux-nvme/20190812075147.79598-1-hare@suse.de/
v3-keith: https://lore.kernel.org/linux-nvme/20190813141510.GB32686@localhost.localdomain/
This commit's change is basically "v3-keith".
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
---
drivers/nvme/host/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f8dd664b2eda..8c2d88526b1d 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -262,6 +262,9 @@ static void nvme_delete_ctrl_sync(struct nvme_ctrl *ctrl)
static blk_status_t nvme_error_status(u16 status)
{
+ if (unlikely(status & NVME_SC_DNR))
+ return BLK_STS_TARGET;
+
switch (status & 0x7ff) {
case NVME_SC_SUCCESS:
return BLK_STS_OK;
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Tue, 13 Apr 2021 13:09:36 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 24/35] nvme: allow local retry and proper failover for
2021-11-06 14:19:23 +00:00
REQ_FAILFAST_TRANSPORT
BZ: 1948690
Upstream Status: RHEL-only
This commit offers a more minimalist version of these 2 rhel-8.git commits:
f8fb6ea1226e2 [nvme] nvme: update failover handling to work with REQ_FAILFAST_TRANSPORT
7dadadb072515 [nvme] nvme: allow retry for requests with REQ_FAILFAST_TRANSPORT set
REQ_FAILFAST_TRANSPORT is set by upper layer software that handles
multipathing. Unlike SCSI, NVMe's error handling was specifically
designed to handle local retry for non-path errors. As such, allow
NVMe's local retry mechanism to be used for requests marked with
REQ_FAILFAST_TRANSPORT.
In this way, the mechanism of NVMe multipath or other multipath are
now equivalent. The mechanism is: non path related error will be
retried locally, path related error is handled by multipath.
Also, introduce FAILUP handling for REQ_FAILFAST_TRANSPORT. Update
NVMe to allow failover of requests marked with either REQ_NVME_MPATH
or REQ_FAILFAST_TRANSPORT. This allows such requests to be given a
disposition of either FAILOVER or FAILUP respectively.
nvme_complete_rq() is updated to call nvme_failup_req() if
nvme_decide_disposition() returns FAILUP. nvme_failup_req() ensures
the request is completed with a retryable path error.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
drivers/nvme/host/core.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 8c2d88526b1d..f68e6d796be1 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -324,6 +324,7 @@ enum nvme_disposition {
COMPLETE,
RETRY,
FAILOVER,
+ FAILUP,
};
static inline enum nvme_disposition nvme_decide_disposition(struct request *req)
@@ -331,15 +332,16 @@ static inline enum nvme_disposition nvme_decide_disposition(struct request *req)
if (likely(nvme_req(req)->status == 0))
return COMPLETE;
- if (blk_noretry_request(req) ||
+ if ((req->cmd_flags & (REQ_FAILFAST_DEV | REQ_FAILFAST_DRIVER)) ||
(nvme_req(req)->status & NVME_SC_DNR) ||
nvme_req(req)->retries >= nvme_max_retries)
return COMPLETE;
- if (req->cmd_flags & REQ_NVME_MPATH) {
+ if (req->cmd_flags & (REQ_NVME_MPATH | REQ_FAILFAST_TRANSPORT)) {
if (nvme_is_path_error(nvme_req(req)->status) ||
blk_queue_dying(req->q))
- return FAILOVER;
+ return (req->cmd_flags & REQ_NVME_MPATH) ?
+ FAILOVER : FAILUP;
} else {
if (blk_queue_dying(req->q))
return COMPLETE;
@@ -361,6 +363,12 @@ static inline void nvme_end_req(struct request *req)
blk_mq_end_request(req, status);
}
+static inline void nvme_failup_req(struct request *req)
+{
+ nvme_req(req)->status = NVME_SC_HOST_PATH_ERROR;
+ nvme_end_req(req);
+}
+
void nvme_complete_rq(struct request *req)
{
trace_nvme_complete_rq(req);
@@ -379,6 +387,9 @@ void nvme_complete_rq(struct request *req)
case FAILOVER:
nvme_failover_req(req);
return;
+ case FAILUP:
+ nvme_failup_req(req);
+ return;
}
}
EXPORT_SYMBOL_GPL(nvme_complete_rq);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Tue, 13 Apr 2021 13:09:37 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 25/35] nvme: decouple basic ANA log page re-read support from
2021-11-06 14:19:23 +00:00
native multipathing
BZ: 1948690
Upstream Status: RHEL-only
This commit offers a more refined version of this rhel-8.git commit:
b904f4b8e0f90 [nvme] nvme: decouple basic ANA log page re-read support from native multipathing
Whether or not ANA is present is a choice of the target implementation;
the host (and whether it supports multipathing) has _zero_ influence on
this. If the target declares a path as 'inaccessible' the path _is_
inaccessible to the host. As such, ANA support should be functional
even if native multipathing is not.
Introduce ability to always re-read ANA log page as required due to ANA
error and make current ANA state available via sysfs -- even if native
multipathing is disabled on the host (e.g. nvme_core.multipath=N).
This is achieved by factoring out nvme_update_ana() and calling it in
nvme_complete_rq() for all FAILOVER requests.
This affords userspace access to the current ANA state independent of
which layer might be doing multipathing. This makes 'nvme list-subsys'
show ANA state for all NVMe subsystems with multiple controllers. It
also allows userspace multipath-tools to rely on the NVMe driver for
ANA support while dm-multipath takes care of multipathing.
And as always, if embedded NVMe users do not want any performance
overhead associated with ANA or native NVMe multipathing they can
disable CONFIG_NVME_MULTIPATH.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
drivers/nvme/host/core.c | 2 ++
drivers/nvme/host/multipath.c | 16 +++++++++++-----
drivers/nvme/host/nvme.h | 4 ++++
3 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f68e6d796be1..0ff9ea8340e4 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -365,6 +365,8 @@ static inline void nvme_end_req(struct request *req)
static inline void nvme_failup_req(struct request *req)
{
+ nvme_update_ana(req);
+
nvme_req(req)->status = NVME_SC_HOST_PATH_ERROR;
nvme_end_req(req);
}
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 2f76969408b2..4c7d12e2fe70 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -65,14 +65,10 @@ bool nvme_mpath_set_disk_name(struct nvme_ns *ns, char *disk_name, int *flags)
return true;
}
-void nvme_failover_req(struct request *req)
+void nvme_update_ana(struct request *req)
{
struct nvme_ns *ns = req->q->queuedata;
u16 status = nvme_req(req)->status & 0x7ff;
- unsigned long flags;
- struct bio *bio;
-
- nvme_mpath_clear_current_path(ns);
/*
* If we got back an ANA error, we know the controller is alive but not
@@ -83,6 +79,16 @@ void nvme_failover_req(struct request *req)
set_bit(NVME_NS_ANA_PENDING, &ns->flags);
queue_work(nvme_wq, &ns->ctrl->ana_work);
}
+}
+
+void nvme_failover_req(struct request *req)
+{
+ struct nvme_ns *ns = req->q->queuedata;
+ unsigned long flags;
+ struct bio *bio;
+
+ nvme_mpath_clear_current_path(ns);
+ nvme_update_ana(req);
spin_lock_irqsave(&ns->head->requeue_lock, flags);
for (bio = req->bio; bio; bio = bio->bi_next)
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index ed79a6c7e804..961dc67d7261 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -746,6 +746,7 @@ void nvme_mpath_wait_freeze(struct nvme_subsystem *subsys);
void nvme_mpath_start_freeze(struct nvme_subsystem *subsys);
bool nvme_mpath_set_disk_name(struct nvme_ns *ns, char *disk_name, int *flags);
void nvme_failover_req(struct request *req);
+void nvme_update_ana(struct request *req);
void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl);
int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id);
@@ -784,6 +785,9 @@ static inline bool nvme_mpath_set_disk_name(struct nvme_ns *ns, char *disk_name,
static inline void nvme_failover_req(struct request *req)
{
}
+static inline void nvme_update_ana(struct request *req)
+{
+}
static inline void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
{
}
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Mike Snitzer <snitzer@redhat.com>
Date: Tue, 25 May 2021 12:36:06 -0400
2022-02-07 08:12:40 +00:00
Subject: [PATCH 26/35] nvme: nvme_mpath_init remove multipath check
2021-11-06 14:19:23 +00:00
BZ: 1948690
Upstream Status: RHEL-only
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
rhel-8.git commit f027c2e4045d02d103c7a545181b6df0b6162ee7
Author: David Milburn <dmilburn@redhat.com>
Date: Wed Jan 29 15:29:37 2020 -0500
[nvme] nvme: nvme_mpath_init remove multipath check
Message-id: <1580311777-9193-1-git-send-email-dmilburn@redhat.com>
Patchwork-id: 294254
Patchwork-instance: patchwork
O-Subject: [RHEL8.2 PATCH] nvme: nvme_mpath_init remove multipath check
Bugzilla: 1790958
RH-Acked-by: Gopal Tiwari <gtiwari@redhat.com>
RH-Acked-by: Ewan Milne <emilne@redhat.com>
Marco Patalano found missing NVMe optimized/inaccessible paths when
executing "nvme list-subsys" command with native multipathing disabled.
He was able to git bisect this back to 6d0f426e ("nvme: fix multipath
crash when ANA is deactivated"). The problem is the check for multipath,
removing this is similar to RHEL commit 158eef2e ("nvme: allow ANA support
to be independent of native multipathing"), I did leave the existing
comment in place for future back ports and as a reminder to watch for
these changes in the future.
Bugzilla: 1790958
Build info: https://brewweb.engineering.redhat.com/brew/taskinfo?taskID=26061480
Upstream: RHEL only
Test: QE verified "nvme list-subsys" command and did sanity check with native
multipathing disabled.
Fixes: 6d0f426e ("nvme: fix multipath crash when ANA is deactivated")
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
---
drivers/nvme/host/multipath.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 4c7d12e2fe70..021a4176b321 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -819,8 +819,7 @@ int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
int error = 0;
/* check if multipath is enabled and we have the capability */
- if (!multipath || !ctrl->subsys ||
- !(ctrl->subsys->cmic & NVME_CTRL_CMIC_ANA))
+ if (!ctrl->subsys || !(ctrl->subsys->cmic & NVME_CTRL_CMIC_ANA))
return 0;
if (!ctrl->max_namespaces ||
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert.xu@redhat.com>
Date: Tue, 10 Aug 2021 17:54:28 +0800
2022-02-07 08:12:40 +00:00
Subject: [PATCH 27/35] random: Add hook to override device reads and
2021-11-06 14:19:23 +00:00
getrandom(2)
Upstream: RHEL only
Bugzilla: 1984784
This patch introduces a hook mechanism to drivers/char/random
to allow the reads on /dev/*random as well as getrandom(2) to
be overridden by an external RNG.
This will be used to override drivers/char/random with a FIPS
RNG in a subsequent patch.
Signed-off-by: Herbert Xu <herbert.xu@redhat.com>
---
drivers/char/random.c | 115 +++++++++++++++++++++++++++++++++++++++++
include/linux/random.h | 7 +++
2 files changed, 122 insertions(+)
diff --git a/drivers/char/random.c b/drivers/char/random.c
2022-02-07 08:12:40 +00:00
index a27ae3999ff3..dc4e136adb08 100644
2021-11-06 14:19:23 +00:00
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -335,6 +335,7 @@
#include <linux/syscalls.h>
#include <linux/completion.h>
#include <linux/uuid.h>
+#include <linux/rcupdate.h>
#include <crypto/chacha.h>
#include <crypto/sha1.h>
@@ -349,6 +350,11 @@
/* #define ADD_INTERRUPT_BENCH */
+/*
+ * Hook for external RNG.
+ */
+static const struct random_extrng __rcu *extrng;
+
/*
* Configuration information
*/
2022-02-07 08:12:40 +00:00
@@ -482,6 +488,9 @@ static int ratelimit_disable __read_mostly;
2021-11-06 14:19:23 +00:00
module_param_named(ratelimit_disable, ratelimit_disable, int, 0644);
MODULE_PARM_DESC(ratelimit_disable, "Disable random ratelimit suppression");
+static const struct file_operations extrng_random_fops;
+static const struct file_operations extrng_urandom_fops;
+
/**********************************************************************
*
* OS independent entropy store. Here are the functions which handle
2022-02-07 08:12:40 +00:00
@@ -1880,6 +1889,13 @@ random_poll(struct file *file, poll_table * wait)
2021-11-06 14:19:23 +00:00
return mask;
}
+static __poll_t
+extrng_poll(struct file *file, poll_table * wait)
+{
+ /* extrng pool is always full, always read, no writes */
+ return EPOLLIN | EPOLLRDNORM;
+}
+
static int
write_pool(struct entropy_store *r, const char __user *buffer, size_t count)
{
2022-02-07 08:12:40 +00:00
@@ -1983,7 +1999,58 @@ static int random_fasync(int fd, struct file *filp, int on)
2021-11-06 14:19:23 +00:00
return fasync_helper(fd, filp, on, &fasync);
}
+static int random_open(struct inode *inode, struct file *filp)
+{
+ const struct random_extrng *rng;
+
+ rcu_read_lock();
+ rng = rcu_dereference(extrng);
+ if (rng && !try_module_get(rng->owner))
+ rng = NULL;
+ rcu_read_unlock();
+
+ if (!rng)
+ return 0;
+
+ filp->f_op = &extrng_random_fops;
+ filp->private_data = rng->owner;
+
+ return 0;
+}
+
+static int urandom_open(struct inode *inode, struct file *filp)
+{
+ const struct random_extrng *rng;
+
+ rcu_read_lock();
+ rng = rcu_dereference(extrng);
+ if (rng && !try_module_get(rng->owner))
+ rng = NULL;
+ rcu_read_unlock();
+
+ if (!rng)
+ return 0;
+
+ filp->f_op = &extrng_urandom_fops;
+ filp->private_data = rng->owner;
+
+ return 0;
+}
+
+static int extrng_release(struct inode *inode, struct file *filp)
+{
+ module_put(filp->private_data);
+ return 0;
+}
+
+static ssize_t
+extrng_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
+{
+ return rcu_dereference_raw(extrng)->extrng_read(buf, nbytes);
+}
+
const struct file_operations random_fops = {
+ .open = random_open,
.read = random_read,
.write = random_write,
.poll = random_poll,
2022-02-07 08:12:40 +00:00
@@ -1994,6 +2061,7 @@ const struct file_operations random_fops = {
2021-11-06 14:19:23 +00:00
};
const struct file_operations urandom_fops = {
+ .open = urandom_open,
.read = urandom_read,
.write = random_write,
.unlocked_ioctl = random_ioctl,
2022-02-07 08:12:40 +00:00
@@ -2002,9 +2070,31 @@ const struct file_operations urandom_fops = {
2021-11-06 14:19:23 +00:00
.llseek = noop_llseek,
};
+static const struct file_operations extrng_random_fops = {
+ .open = random_open,
+ .read = extrng_read,
+ .write = random_write,
+ .poll = extrng_poll,
+ .unlocked_ioctl = random_ioctl,
+ .fasync = random_fasync,
+ .llseek = noop_llseek,
+ .release = extrng_release,
+};
+
+static const struct file_operations extrng_urandom_fops = {
+ .open = urandom_open,
+ .read = extrng_read,
+ .write = random_write,
+ .unlocked_ioctl = random_ioctl,
+ .fasync = random_fasync,
+ .llseek = noop_llseek,
+ .release = extrng_release,
+};
+
SYSCALL_DEFINE3(getrandom, char __user *, buf, size_t, count,
unsigned int, flags)
{
+ const struct random_extrng *rng;
int ret;
if (flags & ~(GRND_NONBLOCK|GRND_RANDOM|GRND_INSECURE))
2022-02-07 08:12:40 +00:00
@@ -2020,6 +2110,18 @@ SYSCALL_DEFINE3(getrandom, char __user *, buf, size_t, count,
2021-11-06 14:19:23 +00:00
if (count > INT_MAX)
count = INT_MAX;
+ rcu_read_lock();
+ rng = rcu_dereference(extrng);
+ if (rng && !try_module_get(rng->owner))
+ rng = NULL;
+ rcu_read_unlock();
+
+ if (rng) {
+ ret = rng->extrng_read(buf, count);
+ module_put(rng->owner);
+ return ret;
+ }
+
if (!(flags & GRND_INSECURE) && !crng_ready()) {
if (flags & GRND_NONBLOCK)
return -EAGAIN;
2022-02-07 08:12:40 +00:00
@@ -2329,3 +2431,16 @@ void add_bootloader_randomness(const void *buf, unsigned int size)
2021-11-06 14:19:23 +00:00
add_device_randomness(buf, size);
}
EXPORT_SYMBOL_GPL(add_bootloader_randomness);
+
+void random_register_extrng(const struct random_extrng *rng)
+{
+ rcu_assign_pointer(extrng, rng);
+}
+EXPORT_SYMBOL_GPL(random_register_extrng);
+
+void random_unregister_extrng(void)
+{
+ RCU_INIT_POINTER(extrng, NULL);
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(random_unregister_extrng);
diff --git a/include/linux/random.h b/include/linux/random.h
index f45b8be3e3c4..7ccdec68b789 100644
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -14,6 +14,11 @@
#include <uapi/linux/random.h>
+struct random_extrng {
+ ssize_t (*extrng_read)(void __user *buf, size_t buflen);
+ struct module *owner;
+};
+
struct random_ready_callback {
struct list_head list;
void (*func)(struct random_ready_callback *rdy);
@@ -44,6 +49,8 @@ extern bool rng_is_initialized(void);
extern int add_random_ready_callback(struct random_ready_callback *rdy);
extern void del_random_ready_callback(struct random_ready_callback *rdy);
extern int __must_check get_random_bytes_arch(void *buf, int nbytes);
+void random_register_extrng(const struct random_extrng *rng);
+void random_unregister_extrng(void);
#ifndef MODULE
extern const struct file_operations random_fops, urandom_fops;
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert.xu@redhat.com>
Date: Tue, 10 Aug 2021 17:56:42 +0800
2022-02-07 08:12:40 +00:00
Subject: [PATCH 28/35] crypto: rng - Override drivers/char/random in FIPS mode
2021-11-06 14:19:23 +00:00
Upstream: RHEL only
Bugzilla: 1984784
This patch overrides the drivers/char/random RNGs with the FIPS
RNG from Crypto API when FIPS mode is enabled.
Signed-off-by: Herbert Xu <herbert.xu@redhat.com>
---
crypto/rng.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 72 insertions(+), 1 deletion(-)
diff --git a/crypto/rng.c b/crypto/rng.c
index fea082b25fe4..50a9d040bed1 100644
--- a/crypto/rng.c
+++ b/crypto/rng.c
@@ -11,14 +11,17 @@
#include <linux/atomic.h>
#include <crypto/internal/rng.h>
#include <linux/err.h>
+#include <linux/fips.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/seq_file.h>
+#include <linux/sched.h>
+#include <linux/sched/signal.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/cryptouser.h>
-#include <linux/compiler.h>
#include <net/netlink.h>
#include "internal.h"
@@ -224,5 +227,73 @@ void crypto_unregister_rngs(struct rng_alg *algs, int count)
}
EXPORT_SYMBOL_GPL(crypto_unregister_rngs);
+static ssize_t crypto_devrandom_read(void __user *buf, size_t buflen)
+{
+ u8 tmp[256];
+ ssize_t ret;
+
+ if (!buflen)
+ return 0;
+
+ ret = crypto_get_default_rng();
+ if (ret)
+ return ret;
+
+ for (;;) {
+ int err;
+ int i;
+
+ i = min_t(int, buflen, sizeof(tmp));
+ err = crypto_rng_get_bytes(crypto_default_rng, tmp, i);
+ if (err) {
+ ret = err;
+ break;
+ }
+
+ if (copy_to_user(buf, tmp, i)) {
+ ret = -EFAULT;
+ break;
+ }
+
+ buflen -= i;
+ buf += i;
+ ret += i;
+
+ if (!buflen)
+ break;
+
+ if (need_resched()) {
+ if (signal_pending(current))
+ break;
+ schedule();
+ }
+ }
+
+ crypto_put_default_rng();
+ memzero_explicit(tmp, sizeof(tmp));
+
+ return ret;
+}
+
+static const struct random_extrng crypto_devrandom_rng = {
+ .extrng_read = crypto_devrandom_read,
+ .owner = THIS_MODULE,
+};
+
+static int __init crypto_rng_init(void)
+{
+ if (fips_enabled)
+ random_register_extrng(&crypto_devrandom_rng);
+ return 0;
+}
+
+static void __exit crypto_rng_exit(void)
+{
+ random_unregister_extrng();
+}
+
+late_initcall(crypto_rng_init);
+module_exit(crypto_rng_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Random Number Generator");
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Dan Johansen <strit@manjaro.org>
Date: Fri, 6 Aug 2021 00:04:27 +0200
2022-02-07 08:12:40 +00:00
Subject: [PATCH 29/35] arm64: dts: rockchip: Setup USB typec port as datarole
2021-11-06 14:19:23 +00:00
on
Some chargers try to put the charged device into device data
role. Before this commit this condition caused the tcpm state machine to
issue a hard reset due to a capability missmatch.
Signed-off-by: Dan Johansen <strit@manjaro.org>
---
arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 9e5d07f5712e..dae8c252bc2b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -707,7 +707,7 @@ fusb0: fusb30x@22 {
connector {
compatible = "usb-c-connector";
- data-role = "host";
+ data-role = "dual";
label = "USB-C";
op-sink-microwatt = <1000000>;
power-role = "dual";
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 14 Oct 2021 20:39:42 +0200
2022-02-07 08:12:40 +00:00
Subject: [PATCH 30/35] x86/PCI: Ignore E820 reservations for bridge windows on
2021-11-06 14:19:23 +00:00
newer systems
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some BIOS-es contain a bug where they add addresses which map to system
RAM in the PCI host bridge window returned by the ACPI _CRS method, see
commit 4dc2287c1805 ("x86: avoid E820 regions when allocating address
space").
To work around this bug Linux excludes E820 reserved addresses when
allocating addresses from the PCI host bridge window since 2010.
Recently (2020) some systems have shown-up with E820 reservations which
cover the entire _CRS returned PCI bridge memory window, causing all
attempts to assign memory to PCI BARs which have not been setup by the
BIOS to fail. For example here are the relevant dmesg bits from a
Lenovo IdeaPad 3 15IIL 81WE:
[mem 0x000000004bc50000-0x00000000cfffffff] reserved
pci_bus 0000:00: root bus resource [mem 0x65400000-0xbfffffff window]
The ACPI specifications appear to allow this new behavior:
The relationship between E820 and ACPI _CRS is not really very clear.
ACPI v6.3, sec 15, table 15-374, says AddressRangeReserved means:
This range of addresses is in use or reserved by the system and is
not to be included in the allocatable memory pool of the operating
system's memory manager.
and it may be used when:
The address range is in use by a memory-mapped system device.
Furthermore, sec 15.2 says:
Address ranges defined for baseboard memory-mapped I/O devices, such
as APICs, are returned as reserved.
A PCI host bridge qualifies as a baseboard memory-mapped I/O device,
and its apertures are in use and certainly should not be included in
the general allocatable pool, so the fact that some BIOS-es reports
the PCI aperture as "reserved" in E820 doesn't seem like a BIOS bug.
So it seems that the excluding of E820 reserved addresses is a mistake.
Ideally Linux would fully stop excluding E820 reserved addresses,
but then the old systems this was added for will regress.
Instead keep the old behavior for old systems, while ignoring
the E820 reservations for any systems from now on.
Old systems are defined here as BIOS year < 2018, this was chosen to
make sure that pci_use_e820 will not be set on the currently affected
systems, while at the same time also taking into account that the
systems for which the E820 checking was originally added may have
received BIOS updates for quite a while (esp. CVE related ones),
giving them a more recent BIOS year then 2010.
Also add pci=no_e820 and pci=use_e820 options to allow overriding
the BIOS year heuristic.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206459
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1868899
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1871793
BugLink: https://bugs.launchpad.net/bugs/1878279
BugLink: https://bugs.launchpad.net/bugs/1931715
BugLink: https://bugs.launchpad.net/bugs/1932069
BugLink: https://bugs.launchpad.net/bugs/1921649
Cc: Benoit Grégoire <benoitg@coeus.ca>
Cc: Hui Wang <hui.wang@canonical.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
.../admin-guide/kernel-parameters.txt | 9 ++++++
arch/x86/include/asm/pci_x86.h | 10 +++++++
arch/x86/kernel/resource.c | 4 +++
arch/x86/pci/acpi.c | 28 +++++++++++++++++++
arch/x86/pci/common.c | 6 ++++
5 files changed, 57 insertions(+)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
2022-02-07 08:12:40 +00:00
index 8ff6dafafdf8..e3f786336cf9 100644
2021-11-06 14:19:23 +00:00
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
2022-02-07 08:12:40 +00:00
@@ -3955,6 +3955,15 @@
2021-11-06 14:19:23 +00:00
please report a bug.
nocrs [X86] Ignore PCI host bridge windows from ACPI.
If you need to use this, please report a bug.
+ use_e820 [X86] Use E820 reservations to exclude parts of
+ PCI host bridge windows. This is a workaround
+ for BIOS defects in host bridge _CRS methods.
+ If you need to use this, please report a bug to
+ <linux-pci@vger.kernel.org>.
+ no_e820 [X86] Ignore E820 reservations for PCI host
+ bridge windows. This is the default on modern
+ hardware. If you need to use this, please report
+ a bug to <linux-pci@vger.kernel.org>.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index 490411dba438..0bb4e7dd0ffc 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -39,6 +39,8 @@ do { \
#define PCI_ROOT_NO_CRS 0x100000
#define PCI_NOASSIGN_BARS 0x200000
#define PCI_BIG_ROOT_WINDOW 0x400000
+#define PCI_USE_E820 0x800000
+#define PCI_NO_E820 0x1000000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
@@ -64,6 +66,8 @@ void pcibios_scan_specific_bus(int busn);
/* pci-irq.c */
+struct pci_dev;
+
struct irq_info {
u8 bus, devfn; /* Bus, device and function */
struct {
@@ -232,3 +236,9 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val)
# define x86_default_pci_init_irq NULL
# define x86_default_pci_fixup_irqs NULL
#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_ACPI)
+extern bool pci_use_e820;
+#else
+#define pci_use_e820 false
+#endif
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
index 9b9fb7882c20..e8dc9bc327bd 100644
--- a/arch/x86/kernel/resource.c
+++ b/arch/x86/kernel/resource.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/ioport.h>
#include <asm/e820/api.h>
+#include <asm/pci_x86.h>
static void resource_clip(struct resource *res, resource_size_t start,
resource_size_t end)
@@ -28,6 +29,9 @@ static void remove_e820_regions(struct resource *avail)
int i;
struct e820_entry *entry;
+ if (!pci_use_e820)
+ return;
+
for (i = 0; i < e820_table->nr_entries; i++) {
entry = &e820_table->entries[i];
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 948656069cdd..72d473054262 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -21,6 +21,8 @@ struct pci_root_info {
static bool pci_use_crs = true;
static bool pci_ignore_seg = false;
+/* Consumed in arch/x86/kernel/resource.c */
+bool pci_use_e820 = false;
static int __init set_use_crs(const struct dmi_system_id *id)
{
@@ -160,6 +162,32 @@ void __init pci_acpi_crs_quirks(void)
"if necessary, use \"pci=%s\" and report a bug\n",
pci_use_crs ? "Using" : "Ignoring",
pci_use_crs ? "nocrs" : "use_crs");
+
+ /*
+ * Some BIOS-es contain a bug where they add addresses which map to
+ * system RAM in the PCI host bridge window returned by the ACPI _CRS
+ * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when
+ * allocating address space"). To avoid this Linux by default excludes
+ * E820 reservations when allocating addresses since 2010.
+ * In 2020 some systems have shown-up with E820 reservations which cover
+ * the entire _CRS returned PCI host bridge window, causing all attempts
+ * to assign memory to PCI BARs to fail if Linux uses E820 reservations.
+ *
+ * Ideally Linux would fully stop using E820 reservations, but then
+ * the old systems this was added for will regress.
+ * Instead keep the old behavior for old systems, while ignoring the
+ * E820 reservations for any systems from now on.
+ */
+ if (year >= 0 && year < 2018)
+ pci_use_e820 = true;
+
+ if (pci_probe & PCI_NO_E820)
+ pci_use_e820 = false;
+ else if (pci_probe & PCI_USE_E820)
+ pci_use_e820 = true;
+
+ printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n",
+ pci_use_e820 ? "Using" : "Ignoring");
}
#ifdef CONFIG_PCI_MMCONFIG
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 3507f456fcd0..091ec7e94fcb 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -595,6 +595,12 @@ char *__init pcibios_setup(char *str)
} else if (!strcmp(str, "nocrs")) {
pci_probe |= PCI_ROOT_NO_CRS;
return NULL;
+ } else if (!strcmp(str, "use_e820")) {
+ pci_probe |= PCI_USE_E820;
+ return NULL;
+ } else if (!strcmp(str, "no_e820")) {
+ pci_probe |= PCI_NO_E820;
+ return NULL;
#ifdef CONFIG_PHYS_ADDR_T_64BIT
} else if (!strcmp(str, "big_root_window")) {
pci_probe |= PCI_BIG_ROOT_WINDOW;
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 14 Oct 2021 20:39:43 +0200
2022-02-07 08:12:40 +00:00
Subject: [PATCH 31/35] x86/PCI/ACPI: Replace printk calls with pr_info/pr_warn
2021-11-06 14:19:23 +00:00
calls
The direct use of printk is deprecated, replace the printk calls
in arch/x86/pci/acpi.c with pr_info/pr_warn calls.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/x86/pci/acpi.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 72d473054262..f357dac92610 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -1,4 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
+
+#define pr_fmt(fmt) "PCI: " fmt
+
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
@@ -38,7 +41,7 @@ static int __init set_nouse_crs(const struct dmi_system_id *id)
static int __init set_ignore_seg(const struct dmi_system_id *id)
{
- printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
+ pr_info("%s detected: ignoring ACPI _SEG\n", id->ident);
pci_ignore_seg = true;
return 0;
}
@@ -158,10 +161,9 @@ void __init pci_acpi_crs_quirks(void)
else if (pci_probe & PCI_USE__CRS)
pci_use_crs = true;
- printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
- "if necessary, use \"pci=%s\" and report a bug\n",
- pci_use_crs ? "Using" : "Ignoring",
- pci_use_crs ? "nocrs" : "use_crs");
+ pr_info("%s host bridge windows from ACPI; if necessary, use \"pci=%s\" and report a bug\n",
+ pci_use_crs ? "Using" : "Ignoring",
+ pci_use_crs ? "nocrs" : "use_crs");
/*
* Some BIOS-es contain a bug where they add addresses which map to
@@ -186,8 +188,8 @@ void __init pci_acpi_crs_quirks(void)
else if (pci_probe & PCI_USE_E820)
pci_use_e820 = true;
- printk(KERN_INFO "PCI: %s E820 reservations for host bridge windows\n",
- pci_use_e820 ? "Using" : "Ignoring");
+ pr_info("%s E820 reservations for host bridge windows\n",
+ pci_use_e820 ? "Using" : "Ignoring");
}
#ifdef CONFIG_PCI_MMCONFIG
@@ -362,9 +364,8 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
root->segment = domain = 0;
if (domain && !pci_domains_supported) {
- printk(KERN_WARNING "pci_bus %04x:%02x: "
- "ignored (multiple domains not supported)\n",
- domain, busnum);
+ pr_warn("pci_bus %04x:%02x: ignored (multiple domains not supported)\n",
+ domain, busnum);
return NULL;
}
@@ -432,7 +433,7 @@ int __init pci_acpi_init(void)
if (acpi_noirq)
return -ENODEV;
- printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
+ pr_info("Using ACPI for IRQ routing\n");
acpi_irq_penalty_init();
pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
@@ -444,7 +445,7 @@ int __init pci_acpi_init(void)
* also do it here in case there are still broken drivers that
* don't use pci_enable_device().
*/
- printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ pr_info("Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
for_each_pci_dev(dev)
acpi_pci_irq_enable(dev);
}
--
2.31.1
2021-12-21 11:38:49 +00:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Tue, 23 Nov 2021 22:05:24 +0100
2022-02-07 08:12:40 +00:00
Subject: [PATCH 32/35] platform/x86: thinkpad_acpi: Add lid_logo_dot to the
2021-12-21 11:38:49 +00:00
list of safe LEDs
There have been various bugs / forum threads about allowing control of
the LED in the ThinkPad logo on the lid of various models.
This seems to be something which users want to control and there really
is no reason to require setting CONFIG_THINKPAD_ACPI_UNSAFE_LEDS for this.
The lid-logo-dot is LED number 10, so change the name of the 10th led
from unknown_led2 to lid_logo_dot and add it to the TPACPI_SAFE_LEDS mask.
Link: https://www.reddit.com/r/thinkpad/comments/7n8eyu/thinkpad_led_control_under_gnulinux/
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1943318
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211123210524.266705-2-hdegoede@redhat.com
---
drivers/platform/x86/thinkpad_acpi.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 3dc055ce6e61..bb56640eb31f 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5813,11 +5813,11 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
"tpacpi::standby",
"tpacpi::dock_status1",
"tpacpi::dock_status2",
- "tpacpi::unknown_led2",
+ "tpacpi::lid_logo_dot",
"tpacpi::unknown_led3",
"tpacpi::thinkvantage",
};
-#define TPACPI_SAFE_LEDS 0x1081U
+#define TPACPI_SAFE_LEDS 0x1481U
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
--
2.31.1
2022-02-07 08:12:40 +00:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Florian Westphal <fw@strlen.de>
Date: Fri, 17 Dec 2021 11:29:56 +0100
Subject: [PATCH 33/35] netfilter: conntrack: tag conntracks picked up in local
out hook
This allows to identify flows that originate from local machine
in a followup patch.
It would be possible to make this a ->status bit instead.
For now I did not do that yet because I don't have a use-case for
exposing this info to userspace.
If one comes up the toggle can be replaced with a status bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
include/net/netfilter/nf_conntrack.h | 1 +
net/netfilter/nf_conntrack_core.c | 3 +++
2 files changed, 4 insertions(+)
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index d24b0a34c8f0..871489df63c6 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -95,6 +95,7 @@ struct nf_conn {
unsigned long status;
u16 cpu;
+ u16 local_origin:1;
possible_net_t ct_net;
#if IS_ENABLED(CONFIG_NF_NAT)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 4712a90a1820..208abc729302 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -1749,6 +1749,9 @@ resolve_normal_ct(struct nf_conn *tmpl,
return 0;
if (IS_ERR(h))
return PTR_ERR(h);
+
+ ct = nf_ct_tuplehash_to_ctrack(h);
+ ct->local_origin = state->hook == NF_INET_LOCAL_OUT;
}
ct = nf_ct_tuplehash_to_ctrack(h);
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Florian Westphal <fw@strlen.de>
Date: Fri, 17 Dec 2021 11:29:57 +0100
Subject: [PATCH 34/35] netfilter: nat: force port remap to prevent shadowing
well-known ports
If destination port is above 32k and source port below 16k
assume this might cause 'port shadowing' where a 'new' inbound
connection matches an existing one, e.g.
inbound X:41234 -> Y:53 matches existing conntrack entry
Z:53 -> X:4123, where Z got natted to X.
In this case, new packet is natted to Z:53 which is likely
unwanted.
We avoid the rewrite for connections that originate from local host:
port-shadowing is only possible with forwarded connections.
Also adjust test case.
v3: no need to call tuple_force_port_remap if already in random mode (Phil)
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
---
net/netfilter/nf_nat_core.c | 43 ++++++++++++++++++--
tools/testing/selftests/netfilter/nft_nat.sh | 5 ++-
2 files changed, 43 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c
index 273117683922..21ec0c3d1d47 100644
--- a/net/netfilter/nf_nat_core.c
+++ b/net/netfilter/nf_nat_core.c
@@ -494,6 +494,38 @@ static void nf_nat_l4proto_unique_tuple(struct nf_conntrack_tuple *tuple,
goto another_round;
}
+static bool tuple_force_port_remap(const struct nf_conntrack_tuple *tuple)
+{
+ u16 sp, dp;
+
+ switch (tuple->dst.protonum) {
+ case IPPROTO_TCP:
+ sp = ntohs(tuple->src.u.tcp.port);
+ dp = ntohs(tuple->dst.u.tcp.port);
+ break;
+ case IPPROTO_UDP:
+ case IPPROTO_UDPLITE:
+ sp = ntohs(tuple->src.u.udp.port);
+ dp = ntohs(tuple->dst.u.udp.port);
+ break;
+ default:
+ return false;
+ }
+
+ /* IANA: System port range: 1-1023,
+ * user port range: 1024-49151,
+ * private port range: 49152-65535.
+ *
+ * Linux default ephemeral port range is 32768-60999.
+ *
+ * Enforce port remapping if sport is significantly lower
+ * than dport to prevent NAT port shadowing, i.e.
+ * accidental match of 'new' inbound connection vs.
+ * existing outbound one.
+ */
+ return sp < 16384 && dp >= 32768;
+}
+
/* Manipulate the tuple into the range given. For NF_INET_POST_ROUTING,
* we change the source to map into the range. For NF_INET_PRE_ROUTING
* and NF_INET_LOCAL_OUT, we change the destination to map into the
@@ -507,11 +539,17 @@ get_unique_tuple(struct nf_conntrack_tuple *tuple,
struct nf_conn *ct,
enum nf_nat_manip_type maniptype)
{
+ bool random_port = range->flags & NF_NAT_RANGE_PROTO_RANDOM_ALL;
const struct nf_conntrack_zone *zone;
struct net *net = nf_ct_net(ct);
zone = nf_ct_zone(ct);
+ if (maniptype == NF_NAT_MANIP_SRC &&
+ !random_port &&
+ !ct->local_origin)
+ random_port = tuple_force_port_remap(orig_tuple);
+
/* 1) If this srcip/proto/src-proto-part is currently mapped,
* and that same mapping gives a unique tuple within the given
* range, use that.
@@ -520,8 +558,7 @@ get_unique_tuple(struct nf_conntrack_tuple *tuple,
* So far, we don't do local source mappings, so multiple
* manips not an issue.
*/
- if (maniptype == NF_NAT_MANIP_SRC &&
- !(range->flags & NF_NAT_RANGE_PROTO_RANDOM_ALL)) {
+ if (maniptype == NF_NAT_MANIP_SRC && !random_port) {
/* try the original tuple first */
if (in_range(orig_tuple, range)) {
if (!nf_nat_used_tuple(orig_tuple, ct)) {
@@ -545,7 +582,7 @@ get_unique_tuple(struct nf_conntrack_tuple *tuple,
*/
/* Only bother mapping if it's not already in range and unique */
- if (!(range->flags & NF_NAT_RANGE_PROTO_RANDOM_ALL)) {
+ if (!random_port) {
if (range->flags & NF_NAT_RANGE_PROTO_SPECIFIED) {
if (!(range->flags & NF_NAT_RANGE_PROTO_OFFSET) &&
l4proto_in_range(tuple, maniptype,
diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh
index da1c1e4b6c86..6a08644d501e 100755
--- a/tools/testing/selftests/netfilter/nft_nat.sh
+++ b/tools/testing/selftests/netfilter/nft_nat.sh
@@ -867,8 +867,9 @@ EOF
return $ksft_skip
fi
- # test default behaviour. Packet from ns1 to ns0 is redirected to ns2.
- test_port_shadow "default" "CLIENT"
+ # test default behaviour. Packet from ns1 to ns0 is not redirected
+ # due to automatic port translation.
+ test_port_shadow "default" "ROUTER"
# test packet filter based mitigation: prevent forwarding of
# packets claiming to come from the service port.
--
2.31.1
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: "Justin M. Forbes" <jforbes@fedoraproject.org>
Date: Tue, 25 Jan 2022 09:08:34 -0600
Subject: [PATCH 35/35] Revert "PCI/MSI: Mask MSI-X vectors only on success"
This reverts commit d8888cdabedf353ab9b5a6af75f70bf341a3e7df.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
---
drivers/pci/msi.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index cc4c2b8a5efd..96132d68be1e 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -721,6 +721,9 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
goto out_disable;
}
+ /* Ensure that all table entries are masked. */
+ msix_mask_all(base, tsize);
+
ret = msix_setup_entries(dev, base, entries, nvec, affd);
if (ret)
goto out_disable;
@@ -747,16 +750,6 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
dev->msix_enabled = 1;
-
- /*
- * Ensure that all table entries are masked to prevent
- * stale entries from firing in a crash kernel.
- *
- * Done late to deal with a broken Marvell NVME device
- * which takes the MSI-X mask bits into account even
- * when MSI-X is disabled, which prevents MSI delivery.
- */
- msix_mask_all(base, tsize);
pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0);
pcibios_free_irq(dev);
--
2.31.1