glusterfs/glusterfs.spec

%global _hardened_build 1

%global _for_fedora_koji_builds 0

# uncomment and add '%' to use the prereltag for pre-releases
# %%global prereltag qa3

##-----------------------------------------------------------------------------
## All argument definitions should be placed here and keep them sorted
##

# asan
# if you wish to compile an rpm with address sanitizer...
# rpmbuild -ta glusterfs-6.0.tar.gz --with asan
%{?_with_asan:%global _with_asan --enable-asan}

%if ( 0%{?rhel} && 0%{?rhel} < 7 )
%global _with_asan %{nil}
%endif

# bd
# if you wish to compile an rpm without the BD map support...
# rpmbuild -ta glusterfs-6.0.tar.gz --without bd
%{?_without_bd:%global _without_bd --disable-bd-xlator}

%if ( 0%{?rhel} && 0%{?rhel} > 7 )
%global _without_bd --without-bd
%endif

# cmocka
# if you wish to compile an rpm with cmocka unit testing...
# rpmbuild -ta glusterfs-6.0.tar.gz --with cmocka
%{?_with_cmocka:%global _with_cmocka --enable-cmocka}

# debug
# if you wish to compile an rpm with debugging...
# rpmbuild -ta glusterfs-6.0.tar.gz --with debug
%{?_with_debug:%global _with_debug --enable-debug}

# epoll
# if you wish to compile an rpm without epoll...
# rpmbuild -ta glusterfs-6.0.tar.gz --without epoll
%{?_without_epoll:%global _without_epoll --disable-epoll}

# fusermount
# if you wish to compile an rpm without fusermount...
# rpmbuild -ta glusterfs-6.0.tar.gz --without fusermount
%{?_without_fusermount:%global _without_fusermount --disable-fusermount}

# geo-rep
# if you wish to compile an rpm without geo-replication support, compile like this...
# rpmbuild -ta glusterfs-6.0.tar.gz --without georeplication
%{?_without_georeplication:%global _without_georeplication --disable-georeplication}

# gnfs
# if you wish to compile an rpm with the legacy gNFS server xlator
# rpmbuild -ta glusterfs-6.0.tar.gz --with gnfs
%{?_with_gnfs:%global _with_gnfs --enable-gnfs}

# ipv6default
# if you wish to compile an rpm with IPv6 default...
# rpmbuild -ta glusterfs-6.0.tar.gz --with ipv6default
%{?_with_ipv6default:%global _with_ipv6default --with-ipv6-default}

# libtirpc
# if you wish to compile an rpm without TIRPC (i.e. use legacy glibc rpc)
# rpmbuild -ta glusterfs-6.0.tar.gz --without libtirpc
%{?_without_libtirpc:%global _without_libtirpc --without-libtirpc}

# Do not use libtirpc on EL6, it does not have xdr_uint64_t() and xdr_uint32_t
# Do not use libtirpc on EL7, it does not have xdr_sizeof()
%if ( 0%{?rhel} && 0%{?rhel} <= 7 )
%global _without_libtirpc --without-libtirpc
%endif


# ocf
# if you wish to compile an rpm without the OCF resource agents...
# rpmbuild -ta glusterfs-6.0.tar.gz --without ocf
%{?_without_ocf:%global _without_ocf --without-ocf}

# rdma
# if you wish to compile an rpm without rdma support, compile like this...
# rpmbuild -ta glusterfs-6.0.tar.gz --without rdma
%{?_without_rdma:%global _without_rdma --disable-ibverbs}

# No RDMA Support on 32-bit ARM
%ifarch armv7hl
%global _without_rdma --disable-ibverbs
%endif

# server
# if you wish to build rpms without server components, compile like this
# rpmbuild -ta glusterfs-6.0.tar.gz --without server
%{?_without_server:%global _without_server --without-server}

# disable server components forcefully as rhel <= 6
%if ( 0%{?rhel} )
%if (!(( "%{?dist}" == ".el6rhs" ) || ( "%{?dist}" == ".el7rhs" ) || ( "%{?dist}" == ".el7rhgs" )))
%global _without_server --without-server
%endif
%endif

%global _without_extra_xlators 1
%global _without_regression_tests 1

# syslog
# if you wish to build rpms without syslog logging, compile like this
# rpmbuild -ta glusterfs-6.0.tar.gz --without syslog
%{?_without_syslog:%global _without_syslog --disable-syslog}

# disable syslog forcefully as rhel <= 6 doesn't have rsyslog or rsyslog-mmcount
# Fedora deprecated syslog, see
#  https://fedoraproject.org/wiki/Changes/NoDefaultSyslog
# (And what about RHEL7?)
%if ( 0%{?fedora} && 0%{?fedora} >= 20 ) || ( 0%{?rhel} && 0%{?rhel} <= 6 )
%global _without_syslog --disable-syslog
%endif

# tsan
# if you wish to compile an rpm with thread sanitizer...
# rpmbuild -ta glusterfs-6.0.tar.gz --with tsan
%{?_with_tsan:%global _with_tsan --enable-tsan}

%if ( 0%{?rhel} && 0%{?rhel} < 7 )
%global _with_tsan %{nil}
%endif

# valgrind
# if you wish to compile an rpm to run all processes under valgrind...
# rpmbuild -ta glusterfs-6.0.tar.gz --with valgrind
%{?_with_valgrind:%global _with_valgrind --enable-valgrind}

##-----------------------------------------------------------------------------
## All %%global definitions should be placed here and keep them sorted
##

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
%global _with_systemd true
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 7 )
%global _with_firewalld --enable-firewalld
%endif

%if 0%{?_tmpfilesdir:1}
%global _with_tmpfilesdir --with-tmpfilesdir=%{_tmpfilesdir}
%else
%global _with_tmpfilesdir --without-tmpfilesdir
%endif

# without server should also disable some server-only components
%if 0%{?_without_server:1}
%global _without_events --disable-events
%global _without_georeplication --disable-georeplication
%global _with_gnfs %{nil}
%global _without_ocf --without-ocf
%endif

%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
%global _usepython3 1
%global _pythonver 3
%else
%global _usepython3 0
%global _pythonver 2
%endif

# From https://fedoraproject.org/wiki/Packaging:Python#Macros
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
%{!?python2_sitelib: %global python2_sitelib %(python2 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib())")}
%{!?python2_sitearch: %global python2_sitearch %(python2 -c "from distutils.sysconfig import get_python_lib; print(get_python_lib(1))")}
%global _rundir %{_localstatedir}/run
%endif

%if ( 0%{?_with_systemd:1} )
%global service_start()   /bin/systemctl --quiet start %1.service || : \
%{nil}
%global service_stop()    /bin/systemctl --quiet stop %1.service || :\
%{nil}
%global service_install() install -D -p -m 0644 %1.service %{buildroot}%2 \
%{nil}
# can't seem to make a generic macro that works
%global glusterd_svcfile   %{_unitdir}/glusterd.service
%global glusterfsd_svcfile %{_unitdir}/glusterfsd.service
%global glusterta_svcfile %{_unitdir}/gluster-ta-volume.service
%global glustereventsd_svcfile %{_unitdir}/glustereventsd.service
%global glusterfssharedstorage_svcfile %{_unitdir}/glusterfssharedstorage.service
%else
%global systemd_post()  /sbin/chkconfig --add %1 >/dev/null 2>&1 || : \
%{nil}
%global systemd_preun() /sbin/chkconfig --del %1 >/dev/null 2>&1 || : \
%{nil}
%global systemd_postun_with_restart() /sbin/service %1 condrestart >/dev/null 2>&1 || : \
%{nil}
%global service_start()   /sbin/service %1 start >/dev/null 2>&1 || : \
%{nil}
%global service_stop()    /sbin/service %1 stop >/dev/null 2>&1 || : \
%{nil}
%global service_install() install -D -p -m 0755 %1.init %{buildroot}%2 \
%{nil}
# can't seem to make a generic macro that works
%global glusterd_svcfile   %{_sysconfdir}/init.d/glusterd
%global glusterfsd_svcfile %{_sysconfdir}/init.d/glusterfsd
%global glustereventsd_svcfile %{_sysconfdir}/init.d/glustereventsd
%endif

%{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{name}-%{version}}

# We do not want to generate useless provides and requires for xlator
# .so files to be set for glusterfs packages.
# Filter all generated:
#
# TODO: RHEL5 does not have a convenient solution
%if ( 0%{?rhel} == 6 )
# filter_setup exists in RHEL6 only
%filter_provides_in %{_libdir}/glusterfs/%{version}/
%global __filter_from_req %{?__filter_from_req} | grep -v -P '^(?!lib).*\.so.*$'
%filter_setup
%else
# modern rpm and current Fedora do not generate requires when the
# provides are filtered
%global __provides_exclude_from ^%{_libdir}/glusterfs/%{version}/.*$
%endif


##-----------------------------------------------------------------------------
## All package definitions should be placed here in alphabetical order
##
Summary:          Distributed File System
%if ( 0%{_for_fedora_koji_builds} )
Name:             glusterfs
Version:          3.8.0
Release:          0.1%{?prereltag:.%{prereltag}}%{?dist}
%else
Name:             glusterfs
Version:          6.0
Release:          1%{?dist}
ExcludeArch:      i686
%endif
License:          GPLv2 or LGPLv3+
URL:              http://docs.gluster.org/
%if ( 0%{_for_fedora_koji_builds} )
Source0:          http://bits.gluster.org/pub/gluster/glusterfs/src/glusterfs-%{version}%{?prereltag}.tar.gz
Source1:          glusterd.sysconfig
Source2:          glusterfsd.sysconfig
Source7:          glusterfsd.service
Source8:          glusterfsd.init
%else
Source0:          glusterfs-6.0.tar.gz
%endif

Requires(pre):    shadow-utils
%if ( 0%{?_with_systemd:1} )
BuildRequires:    systemd
%endif

Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%endif
%if 0%{?_with_asan:1} && !( 0%{?rhel} && 0%{?rhel} < 7 )
BuildRequires:    libasan
%endif
%if 0%{?_with_tsan:1} && !( 0%{?rhel} && 0%{?rhel} < 7 )
BuildRequires:    libtsan
%endif
BuildRequires:    git
BuildRequires:    bison flex
BuildRequires:    gcc make libtool
BuildRequires:    ncurses-devel readline-devel
BuildRequires:    libxml2-devel openssl-devel
BuildRequires:    libaio-devel libacl-devel
BuildRequires:    python%{_pythonver}-devel
%if ( 0%{?rhel} && 0%{?rhel} < 8 )
BuildRequires:    python-ctypes
%endif
%if ( 0%{?_with_ipv6default:1} ) || ( 0%{!?_without_libtirpc:1} )
BuildRequires:    libtirpc-devel
%endif
%if ( 0%{?fedora} && 0%{?fedora} > 27 ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
BuildRequires:    rpcgen
%endif
BuildRequires:    userspace-rcu-devel >= 0.7
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
BuildRequires:    automake
%endif
BuildRequires:    libuuid-devel
%if ( 0%{?_with_cmocka:1} )
BuildRequires:    libcmocka-devel >= 1.0.1
%endif
%if ( 0%{!?_without_georeplication:1} )
BuildRequires:    libattr-devel
%endif

%if (0%{?_with_firewalld:1})
BuildRequires:    firewalld
%endif

Obsoletes:        hekafs
Obsoletes:        %{name}-common < %{version}-%{release}
Obsoletes:        %{name}-core < %{version}-%{release}
Obsoletes:        %{name}-ufo
Obsoletes:        %{name}-ganesha
%if ( 0%{!?_with_gnfs:1} )
Obsoletes:        %{name}-gnfs
%endif
Provides:         %{name}-common = %{version}-%{release}
Provides:         %{name}-core = %{version}-%{release}

# Patch0001: 0001-Update-rfc.sh-to-rhgs-3.5.0.patch
Patch0002: 0002-glusterd-fix-op-versions-for-RHS-backwards-compatabi.patch
Patch0003: 0003-rpc-set-bind-insecure-to-off-by-default.patch
Patch0004: 0004-glusterd-spec-fixing-autogen-issue.patch
Patch0005: 0005-libglusterfs-glusterd-Fix-compilation-errors.patch
Patch0006: 0006-build-remove-ghost-directory-entries.patch
Patch0007: 0007-build-add-RHGS-specific-changes.patch
Patch0008: 0008-secalert-remove-setuid-bit-for-fusermount-glusterfs.patch
Patch0009: 0009-build-introduce-security-hardening-flags-in-gluster.patch
Patch0010: 0010-spec-fix-add-pre-transaction-scripts-for-geo-rep-and.patch
Patch0011: 0011-rpm-glusterfs-devel-for-client-builds-should-not-dep.patch
Patch0012: 0012-build-add-pretrans-check.patch
Patch0013: 0013-glusterd-fix-info-file-checksum-mismatch-during-upgr.patch
Patch0014: 0014-build-spec-file-conflict-resolution.patch
Patch0015: 0015-build-randomize-temp-file-names-in-pretrans-scriptle.patch
Patch0016: 0016-glusterd-parallel-readdir-Change-the-op-version-of-p.patch
Patch0017: 0017-glusterd-Revert-op-version-for-cluster.max-brick-per.patch
Patch0018: 0018-cli-Add-message-for-user-before-modifying-brick-mult.patch
Patch0019: 0019-build-launch-glusterd-upgrade-after-all-new-bits-are.patch
Patch0020: 0020-spec-unpackaged-files-found-for-RHEL-7-client-build.patch
Patch0021: 0021-cli-glusterfsd-remove-copyright-information.patch
Patch0022: 0022-cli-Remove-upstream-doc-reference.patch
Patch0023: 0023-hooks-remove-selinux-hooks.patch
Patch0024: 0024-glusterd-Make-localtime-logging-option-invisible-in-.patch
Patch0025: 0025-build-make-RHGS-version-available-for-server.patch
Patch0026: 0026-glusterd-Introduce-daemon-log-level-cluster-wide-opt.patch
Patch0027: 0027-glusterd-change-op-version-of-fips-mode-rchecksum.patch
Patch0028: 0028-glusterd-Reset-op-version-for-features.shard-deletio.patch
Patch0029: 0029-glusterd-Reset-op-version-for-features.shard-lru-lim.patch
Patch0030: 0030-selinux-glusterd-add-features.selinux-to-glusterd-vo.patch
Patch0031: 0031-glusterd-turn-off-selinux-feature-in-downstream.patch
Patch0032: 0032-glusterd-update-gd-op-version-to-3_7_0.patch
Patch0033: 0033-build-add-missing-explicit-package-dependencies.patch
Patch0034: 0034-glusterd-introduce-a-new-op-version-for-rhgs-3.4.3.patch
Patch0035: 0035-glusterd-tag-rebalance-mgmt_v3-command-to-op-version.patch
Patch0036: 0036-build-add-conditional-dependency-on-server-for-devel.patch
Patch0037: 0037-cli-change-the-warning-message.patch
Patch0038: 0038-spec-avoid-creation-of-temp-file-in-lua-script.patch
Patch0039: 0039-cli-fix-query-to-user-during-brick-mux-selection.patch
Patch0040: 0040-build-Remove-unsupported-test-cases-failing-consiste.patch
Patch0041: 0041-tests-geo-rep-Build-failed-in-Jenkins-for-test-bug-1.patch
Patch0042: 0042-spec-client-server-Builds-are-failing-on-rhel-6.patch
Patch0043: 0043-inode-don-t-dump-the-whole-table-to-CLI.patch
Patch0044: 0044-cluster-ec-Don-t-enqueue-an-entry-if-it-is-already-h.patch
Patch0045: 0045-glusterd-fix-txn-id-mem-leak.patch
Patch0046: 0046-protocol-client-Do-not-fallback-to-anon-fd-if-fd-is-.patch
Patch0047: 0047-client-rpc-Fix-the-payload-being-sent-on-the-wire.patch
Patch0048: 0048-gfapi-Unblock-epoll-thread-for-upcall-processing.patch
Patch0049: 0049-transport-socket-log-shutdown-msg-occasionally.patch
Patch0050: 0050-geo-rep-Fix-syncing-multiple-rename-of-symlink.patch
Patch0051: 0051-spec-update-rpm-install-condition.patch
Patch0052: 0052-geo-rep-IPv6-support.patch

%description
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package includes the glusterfs binary, the glusterfsd daemon and the
libglusterfs and glusterfs translator modules common to both GlusterFS server
and client framework.

%package api
Summary:          GlusterFS api library
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description api
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs libgfapi library.

%package api-devel
Summary:          Development Libraries
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-devel%{?_isa} = %{version}-%{release}
Requires:         libacl-devel
Requires:         %{name}-api%{?_isa} = %{version}-%{release}

%description api-devel
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the api include files.

%if ( 0%{!?_without_server:1} )
%package cli
Summary:          GlusterFS CLI
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description cli
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the GlusterFS CLI application and its man page
%endif

%package cloudsync-plugins
Summary:          Cloudsync Plugins
BuildRequires:    libcurl-devel

%description cloudsync-plugins
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides cloudsync plugins for archival feature.

%package devel
Summary:          Development Libraries
Requires:         %{name}%{?_isa} = %{version}-%{release}
# Needed for the Glupy examples to work
%if ( 0%{!?_without_extra_xlators:1} )
Requires:         %{name}-extra-xlators%{?_isa} = %{version}-%{release}
%endif
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
%if ( 0%{!?_without_server:1} )
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
%endif

%description devel
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the development libraries and include files.

%if ( 0%{!?_without_extra_xlators:1} )
%package extra-xlators
Summary:          Extra Gluster filesystem Translators
# We need python-gluster rpm for gluster module's __init__.py in Python
# site-packages area
Requires:         python%{_pythonver}-gluster = %{version}-%{release}
Requires:         python%{_pythonver}

%description extra-xlators
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides extra filesystem Translators, such as Glupy,
for GlusterFS.
%endif

%package fuse
Summary:          Fuse client
BuildRequires:    fuse-devel
Requires:         attr
Requires:         psmisc

Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}

Obsoletes:        %{name}-client < %{version}-%{release}
Provides:         %{name}-client = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description fuse
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to FUSE based clients and inlcudes the
glusterfs(d) binary.

%if ( 0%{!?_without_georeplication:1} )
%package geo-replication
Summary:          GlusterFS Geo-replication
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
Requires:         python%{_pythonver}
Requires:         python%{_pythonver}-prettytable
Requires:         python%{_pythonver}-gluster = %{version}-%{release}

Requires:         rsync
Requires:         util-linux
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description geo-replication
GlusterFS is a distributed file-system capable of scaling to several
peta-bytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file system in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in userspace and easily manageable.

This package provides support to geo-replication.
%endif

%if ( 0%{?_with_gnfs:1} )
%package gnfs
Summary:          GlusterFS gNFS server
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}
Requires:         nfs-utils

%description gnfs
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs legacy gNFS server xlator
%endif

%package libs
Summary:          GlusterFS common libraries

%description libs
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the base GlusterFS libraries

%package -n python%{_pythonver}-gluster
Summary:          GlusterFS python library
Requires:         python%{_pythonver}
%if ( ! %{_usepython3} )
%{?python_provide:%python_provide python-gluster}
Provides:         python-gluster = %{version}-%{release}
Obsoletes:        python-gluster < 3.10
%endif

%description -n python%{_pythonver}-gluster
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package contains the python modules of GlusterFS and own gluster
namespace.

%if ( 0%{!?_without_rdma:1} )
%package rdma
Summary:          GlusterFS rdma support for ib-verbs
%if ( 0%{?fedora} && 0%{?fedora} > 26 )
BuildRequires:    rdma-core-devel
%else
BuildRequires:    libibverbs-devel
BuildRequires:    librdmacm-devel >= 1.0.15
%endif
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description rdma
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides support to ib-verbs library.
%endif

%if ( 0%{!?_without_regression_tests:1} )
%package regression-tests
Summary:          Development Tools
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-fuse%{?_isa} = %{version}-%{release}
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
## thin provisioning support
Requires:         lvm2 >= 2.02.89
Requires:         perl(App::Prove) perl(Test::Harness) gcc util-linux-ng
Requires:         python%{_pythonver}
Requires:         attr dbench file git libacl-devel net-tools
Requires:         nfs-utils xfsprogs yajl psmisc bc

%description regression-tests
The Gluster Test Framework, is a suite of scripts used for
regression testing of Gluster.
%endif

%if ( 0%{!?_without_ocf:1} )
%package resource-agents
Summary:          OCF Resource Agents for GlusterFS
License:          GPLv3+
BuildArch:        noarch
# this Group handling comes from the Fedora resource-agents package
# for glusterd
Requires:         %{name}-server = %{version}-%{release}
# depending on the distribution, we need pacemaker or resource-agents
Requires:         %{_prefix}/lib/ocf/resource.d

%description resource-agents
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the resource agents which plug glusterd into
Open Cluster Framework (OCF) compliant cluster resource managers,
like Pacemaker.
%endif

%if ( 0%{!?_without_server:1} )
%package server
Summary:          Clustered file-system server
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-cli%{?_isa} = %{version}-%{release}
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}
# some daemons (like quota) use a fuse-mount, glusterfsd is part of -fuse
Requires:         %{name}-fuse%{?_isa} = %{version}-%{release}
# self-heal daemon, rebalance, nfs-server etc. are actually clients
Requires:         %{name}-api%{?_isa} = %{version}-%{release}
Requires:         %{name}-client-xlators%{?_isa} = %{version}-%{release}
# lvm2 for snapshot, and nfs-utils and rpcbind/portmap for gnfs server
Requires:         lvm2
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%else
Requires(post):   /sbin/chkconfig
Requires(preun):  /sbin/service
Requires(preun):  /sbin/chkconfig
Requires(postun): /sbin/service
%endif
%if (0%{?_with_firewalld:1})
# we install firewalld rules, so we need to have the directory owned
%if ( 0%{!?rhel} )
# not on RHEL because firewalld-filesystem appeared in 7.3
# when EL7 rpm gets weak dependencies we can add a Suggests:
Requires:         firewalld-filesystem
%endif
%endif
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
Requires:         rpcbind
%else
Requires:         portmap
%endif
%if ( 0%{?rhel} && 0%{?rhel} <= 6 )
Requires:         python-argparse
%endif
%if ( 0%{?fedora} && 0%{?fedora} > 27 ) || ( 0%{?rhel} && 0%{?rhel} > 7 )
Requires:         python%{_pythonver}-pyxattr
%else
Requires:         pyxattr
%endif
%if (0%{?_with_valgrind:1})
Requires:         valgrind
%endif

%description server
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the glusterfs server daemon.
%endif

%package thin-arbiter
Summary:          GlusterFS thin-arbiter module
Requires:         %{name}%{?_isa} = %{version}-%{release}
Requires:         %{name}-server%{?_isa} = %{version}-%{release}

%description thin-arbiter
This package provides a tie-breaker functionality to GlusterFS
replicate volume. It includes translators required to provide the
functionality, and also few other scripts required for getting the setup done.

This package provides the glusterfs thin-arbiter translator.

%package client-xlators
Summary:          GlusterFS client-side translators
Requires:         %{name}-libs%{?_isa} = %{version}-%{release}

%description client-xlators
GlusterFS is a distributed file-system capable of scaling to several
petabytes. It aggregates various storage bricks over Infiniband RDMA
or TCP/IP interconnect into one large parallel network file
system. GlusterFS is one of the most sophisticated file systems in
terms of features and extensibility.  It borrows a powerful concept
called Translators from GNU Hurd kernel. Much of the code in GlusterFS
is in user space and easily manageable.

This package provides the translators needed on any GlusterFS client.

%if ( 0%{!?_without_events:1} )
%package events
Summary:          GlusterFS Events
Requires:         %{name}-server%{?_isa} = %{version}-%{release}
Requires:         python%{_pythonver} python%{_pythonver}-prettytable
Requires:         python%{_pythonver}-gluster = %{version}-%{release}
%if ( 0%{?rhel} && 0%{?rhel} < 8 )
Requires:         python-requests
%else
Requires:         python%{_pythonver}-requests
%endif
%if ( 0%{?rhel} && 0%{?rhel} < 7 )
Requires:         python-argparse
%endif
%if ( 0%{?_with_systemd:1} )
%{?systemd_requires}
%endif

%description events
GlusterFS Events

%endif

%prep
%setup -q -n %{name}-%{version}%{?prereltag}

# sanitization scriptlet for patches with file renames
ls %{_topdir}/SOURCES/*.patch | sort | \
while read p
do
    # if the destination file exists, its most probably stale
    # so we must remove it
    rename_to=( $(grep -i 'rename to' $p | cut -f 3 -d ' ') )
    if [ ${#rename_to[*]} -gt 0 ]; then
        for f in ${rename_to[*]}
        do
            if [ -f $f ]; then
                rm -f $f
            elif [ -d $f ]; then
                rm -rf $f
            fi
        done
    fi

    SOURCE_FILES=( $(egrep '^\-\-\- a/' $p | cut -f 2- -d '/') )
    DEST_FILES=( $(egrep '^\+\+\+ b/' $p | cut -f 2- -d '/') )
    EXCLUDE_DOCS=()
    for idx in ${!SOURCE_FILES[@]}; do
        # skip the doc 
        source_file=${SOURCE_FILES[$idx]}
        dest_file=${DEST_FILES[$idx]}
        if [[ "$dest_file" =~ ^doc/.+ ]]; then
            if [ "$source_file" != "dev/null" ] && [ ! -f "$dest_file" ]; then
                # if patch is being applied to a doc file and if the doc file
                # hasn't been added so far then we need to exclude it
                EXCLUDE_DOCS=( ${EXCLUDE_DOCS[*]} "$dest_file" )
            fi
        fi
    done
    EXCLUDE_DOCS_OPT=""
    for doc in ${EXCLUDE_DOCS}; do
        EXCLUDE_DOCS_OPT="--exclude=$doc $EXCLUDE_DOCS_OPT"
    done
    # apply the patch with 'git apply'
    git apply -p1 --exclude=rfc.sh \
                  --exclude=.gitignore \
                  --exclude=.testignore \
                  --exclude=MAINTAINERS \
                  --exclude=extras/checkpatch.pl \
                  --exclude=build-aux/checkpatch.pl \
                  --exclude='tests/*' \
                  ${EXCLUDE_DOCS_OPT} \
                  $p
done

%if ( ! %{_usepython3} )
echo "fixing python shebangs..."
for f in api events extras geo-replication libglusterfs tools xlators; do
find $f -type f -exec sed -i 's|/usr/bin/python3|/usr/bin/python2|' {} \;
done
%endif

%build

# In RHEL7 few hardening flags are available by default, however the RELRO
# default behaviour is partial, convert to full
%if ( 0%{?rhel} && 0%{?rhel} >= 7 )
LDFLAGS="$RPM_LD_FLAGS -Wl,-z,relro,-z,now"
export LDFLAGS
%else
%if ( 0%{?rhel} && 0%{?rhel} == 6 )
CFLAGS="$RPM_OPT_FLAGS -fPIE -DPIE"
LDFLAGS="$RPM_LD_FLAGS -pie -Wl,-z,relro,-z,now"
%else
#It appears that with gcc-4.1.2 in RHEL5 there is an issue using both -fPIC and
 # -fPIE that makes -z relro not work; -fPIE seems to undo what -fPIC does
CFLAGS="$CFLAGS $RPM_OPT_FLAGS"
LDFLAGS="$RPM_LD_FLAGS -Wl,-z,relro,-z,now"
%endif
export CFLAGS
export LDFLAGS
%endif

./autogen.sh && %configure \
        %{?_with_asan} \
        %{?_with_cmocka} \
        %{?_with_debug} \
        %{?_with_firewalld} \
        %{?_with_gnfs} \
        %{?_with_tmpfilesdir} \
        %{?_with_tsan} \
        %{?_with_valgrind} \
        %{?_without_epoll} \
        %{?_without_events} \
        %{?_without_fusermount} \
        %{?_without_georeplication} \
        %{?_without_ocf} \
        %{?_without_rdma} \
        %{?_without_server} \
        %{?_without_syslog} \
        %{?_with_ipv6default} \
        %{?_without_libtirpc}

# fix hardening and remove rpath in shlibs
%if ( 0%{?fedora} && 0%{?fedora} > 17 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
sed -i 's| \\\$compiler_flags |&\\\$LDFLAGS |' libtool
%endif
sed -i 's|^hardcode_libdir_flag_spec=.*|hardcode_libdir_flag_spec=""|' libtool
sed -i 's|^runpath_var=LD_RUN_PATH|runpath_var=DIE_RPATH_DIE|' libtool

make %{?_smp_mflags}

%check
make check

%install
rm -rf %{buildroot}
make install DESTDIR=%{buildroot}
%if ( 0%{!?_without_server:1} )
%if ( 0%{_for_fedora_koji_builds} )
install -D -p -m 0644 %{SOURCE1} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
install -D -p -m 0644 %{SOURCE2} \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterfsd
%else
install -D -p -m 0644 extras/glusterd-sysconfig \
    %{buildroot}%{_sysconfdir}/sysconfig/glusterd
%endif
%endif

mkdir -p %{buildroot}%{_localstatedir}/log/glusterd
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfs
mkdir -p %{buildroot}%{_localstatedir}/log/glusterfsd
mkdir -p %{buildroot}%{_rundir}/gluster

# Remove unwanted files from all the shared libraries
find %{buildroot}%{_libdir} -name '*.a' -delete
find %{buildroot}%{_libdir} -name '*.la' -delete

# Remove installed docs, the ones we want are included by %%doc, in
# /usr/share/doc/glusterfs or /usr/share/doc/glusterfs-x.y.z depending
# on the distribution
%if ( 0%{?fedora} && 0%{?fedora} > 19 ) || ( 0%{?rhel} && 0%{?rhel} > 6 )
rm -rf %{buildroot}%{_pkgdocdir}/*
%else
rm -rf %{buildroot}%{_defaultdocdir}/%{name}
mkdir -p %{buildroot}%{_pkgdocdir}
%endif
head -50 ChangeLog > ChangeLog.head && mv ChangeLog.head ChangeLog
cat << EOM >> ChangeLog

More commit messages for this ChangeLog can be found at
https://forge.gluster.org/glusterfs-core/glusterfs/commits/v%{version}%{?prereltag}
EOM

# Remove benchmarking and other unpackaged files
# make install always puts these in %%{_defaultdocdir}/%%{name} so don't
# use %%{_pkgdocdir}; that will be wrong on later Fedora distributions
rm -rf %{buildroot}%{_defaultdocdir}/%{name}/benchmarking
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs-mode.el
rm -f %{buildroot}%{_defaultdocdir}/%{name}/glusterfs.vim

%if ( 0%{!?_without_server:1} )
# Create working directory
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd

# Update configuration file to /var/lib working directory
sed -i 's|option working-directory /etc/glusterd|option working-directory %{_sharedstatedir}/glusterd|g' \
    %{buildroot}%{_sysconfdir}/glusterfs/glusterd.vol
%endif

# Install glusterfsd .service or init.d file
%if ( 0%{!?_without_server:1} )
%if ( 0%{_for_fedora_koji_builds} )
%service_install glusterfsd %{glusterfsd_svcfile}
%endif
%endif

install -D -p -m 0644 extras/glusterfs-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs

%if ( 0%{!?_without_georeplication:1} )
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/geo-replication
touch %{buildroot}%{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
install -D -p -m 0644 extras/glusterfs-georep-logrotate \
    %{buildroot}%{_sysconfdir}/logrotate.d/glusterfs-georep
%endif

%if ( 0%{!?_without_server:1} )
touch %{buildroot}%{_sharedstatedir}/glusterd/glusterd.info
touch %{buildroot}%{_sharedstatedir}/glusterd/options
subdirs=(add-brick create copy-file delete gsync-create remove-brick reset set start stop)
for dir in ${subdirs[@]}; do
    mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/hooks/1/"$dir"/{pre,post}
done
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/glustershd
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/peers
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/vols
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/nfs/run
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/bitd
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/quotad
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/scrub
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/snaps
mkdir -p %{buildroot}%{_sharedstatedir}/glusterd/ss_brick
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/nfs-server.vol
touch %{buildroot}%{_sharedstatedir}/glusterd/nfs/run/nfs.pid
%endif

find ./tests ./run-tests.sh -type f | cpio -pd %{buildroot}%{_prefix}/share/glusterfs

## Install bash completion for cli
%if ( 0%{!?_without_server:1} )
install -p -m 0744 -D extras/command-completion/gluster.bash \
    %{buildroot}%{_sysconfdir}/bash_completion.d/gluster
%endif

%if ( 0%{!?_without_server:1} )
echo "RHGS 3.5" > %{buildroot}%{_datadir}/glusterfs/release
%endif

%clean
rm -rf %{buildroot}

##-----------------------------------------------------------------------------
## All %%post should be placed here and keep them sorted
##
%post
/sbin/ldconfig
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%systemd_postun_with_restart rsyslog
%endif
%endif
exit 0

%post api
/sbin/ldconfig

%if ( 0%{!?_without_events:1} )
%post events
%systemd_post glustereventsd
%endif

%if ( 0%{!?_without_georeplication:1} )
%post geo-replication
if [ $1 -ge 1 ]; then
    %systemd_postun_with_restart glusterd
fi
exit 0
%endif

%post libs
/sbin/ldconfig

%if ( 0%{!?_without_server:1} )
%post server
# Legacy server
%systemd_post glusterd
%if ( 0%{_for_fedora_koji_builds} )
%systemd_post glusterfsd
%endif
# ".cmd_log_history" is renamed to "cmd_history.log" in GlusterFS-3.7 .
# While upgrading glusterfs-server package form GlusterFS version <= 3.6 to
# GlusterFS version 3.7, ".cmd_log_history" should be renamed to
# "cmd_history.log" to retain cli command history contents.
if [ -f %{_localstatedir}/log/glusterfs/.cmd_log_history ]; then
    mv %{_localstatedir}/log/glusterfs/.cmd_log_history \
       %{_localstatedir}/log/glusterfs/cmd_history.log
fi

# Genuine Fedora (and EPEL) builds never put gluster files in /etc; if
# there are any files in /etc from a prior gluster.org install, move them
# to /var/lib. (N.B. Starting with 3.3.0 all gluster files are in /var/lib
# in gluster.org RPMs.) Be careful to copy them on the off chance that
# /etc and /var/lib are on separate file systems
if [ -d /etc/glusterd -a ! -h %{_sharedstatedir}/glusterd ]; then
    mkdir -p %{_sharedstatedir}/glusterd
    cp -a /etc/glusterd %{_sharedstatedir}/glusterd
    rm -rf /etc/glusterd
    ln -sf %{_sharedstatedir}/glusterd /etc/glusterd
fi

# Rename old volfiles in an RPM-standard way.  These aren't actually
# considered package config files, so %%config doesn't work for them.
if [ -d %{_sharedstatedir}/glusterd/vols ]; then
    for file in $(find %{_sharedstatedir}/glusterd/vols -name '*.vol'); do
        newfile=${file}.rpmsave
        echo "warning: ${file} saved as ${newfile}"
        cp ${file} ${newfile}
    done
fi

# add marker translator
# but first make certain that there are no old libs around to bite us
# BZ 834847
if [ -e /etc/ld.so.conf.d/glusterfs.conf ]; then
    rm -f /etc/ld.so.conf.d/glusterfs.conf
    /sbin/ldconfig
fi

%if (0%{?_with_firewalld:1})
    %firewalld_reload
%endif

%endif

##-----------------------------------------------------------------------------
## All %%pre should be placed here and keep them sorted
##
%pre
getent group gluster > /dev/null || groupadd -r gluster
getent passwd gluster > /dev/null || useradd -r -g gluster -d %{_rundir}/gluster -s /sbin/nologin -c "GlusterFS daemons" gluster
exit 0

##-----------------------------------------------------------------------------
## All %%preun should be placed here and keep them sorted
##
%if ( 0%{!?_without_events:1} )
%preun events
if [ $1 -eq 0 ]; then
    if [ -f %glustereventsd_svcfile ]; then
        %service_stop glustereventsd
        %systemd_preun glustereventsd
    fi
fi
exit 0
%endif

%if ( 0%{!?_without_server:1} )
%preun server
if [ $1 -eq 0 ]; then
    if [ -f %glusterfsd_svcfile ]; then
        %service_stop glusterfsd
    fi
    %service_stop glusterd
    if [ -f %glusterfsd_svcfile ]; then
        %systemd_preun glusterfsd
    fi
    %systemd_preun glusterd
fi
if [ $1 -ge 1 ]; then
    if [ -f %glusterfsd_svcfile ]; then
        %systemd_postun_with_restart glusterfsd
    fi
    %systemd_postun_with_restart glusterd
fi
exit 0
%endif

%preun thin-arbiter
if [ $1 -eq 0 ]; then
    if [ -f %glusterta_svcfile ]; then
        %service_stop gluster-ta-volume
        %systemd_preun gluster-ta-volume
    fi
fi

##-----------------------------------------------------------------------------
## All %%postun should be placed here and keep them sorted
##
%postun
%if ( 0%{!?_without_syslog:1} )
%if ( 0%{?fedora} ) || ( 0%{?rhel} && 0%{?rhel} >= 6 )
%systemd_postun_with_restart rsyslog
%endif
%endif

%if ( 0%{!?_without_server:1} )
%postun server
%if (0%{?_with_firewalld:1})
    %firewalld_reload
%endif
exit 0
%endif

##-----------------------------------------------------------------------------
## All %%files should be placed here and keep them grouped
##
%files
%doc ChangeLog COPYING-GPLV2 COPYING-LGPLV3 INSTALL README.md THANKS COMMITMENT
%{_mandir}/man8/*gluster*.8*
%if ( 0%{!?_without_server:1} )
%exclude %{_mandir}/man8/gluster.8*
%endif
%dir %{_localstatedir}/log/glusterfs
%if ( 0%{!?_without_rdma:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif
%if 0%{?!_without_server:1}
%dir %{_datadir}/glusterfs
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/post-upgrade-script-for-quota.sh
     %{_datadir}/glusterfs/scripts/pre-upgrade-script-for-quota.sh
%endif
# xlators that are needed on the client- and on the server-side
%dir %{_libdir}/glusterfs
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/auth
     %{_libdir}/glusterfs/%{version}%{?prereltag}/auth/addr.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/auth/login.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport
     %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/socket.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/error-gen.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/delay-gen.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/io-stats.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/sink.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/debug/trace.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/access-control.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/barrier.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/cdc.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/changelog.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/utime.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/gfid-access.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/namespace.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/read-only.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/shard.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/snapview-client.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/worm.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/cloudsync.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/meta.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/io-cache.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/io-threads.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/md-cache.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/open-behind.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/quick-read.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/read-ahead.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/readdir-ahead.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/stat-prefetch.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/write-behind.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/nl-cache.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/system
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/system/posix-acl.so
%dir %attr(0775,gluster,gluster) %{_rundir}/gluster
%if 0%{?_tmpfilesdir:1} && 0%{!?_without_server:1}
%{_tmpfilesdir}/gluster.conf
%endif
%if ( 0%{?_without_extra_xlators:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quiesce.so
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground/template.so
%endif
%if ( 0%{?_without_regression_tests:1} )
%exclude %{_datadir}/glusterfs/run-tests.sh
%exclude %{_datadir}/glusterfs/tests
%endif
%if 0%{?_without_server:1}
%if ( 0%{?_with_systemd:1} )
%exclude %{_datadir}/glusterfs/scripts/control-cpu-load.sh
%exclude %{_datadir}/glusterfs/scripts/control-mem.sh
%endif
%endif

%files api
%exclude %{_libdir}/*.so
# libgfapi files
%{_libdir}/libgfapi.*
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/api.so

%files api-devel
%{_libdir}/pkgconfig/glusterfs-api.pc
%{_libdir}/libgfapi.so
%dir %{_includedir}/glusterfs
%dir %{_includedir}/glusterfs/api
     %{_includedir}/glusterfs/api/*

%if ( 0%{!?_without_server:1} )
%files cli
%{_sbindir}/gluster
%{_mandir}/man8/gluster.8*
%{_sysconfdir}/bash_completion.d/gluster
%endif

%files cloudsync-plugins
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/cloudsync-plugins
     %{_libdir}/glusterfs/%{version}%{?prereltag}/cloudsync-plugins/cloudsyncs3.so

%files devel
%dir %{_includedir}/glusterfs
     %{_includedir}/glusterfs/*
%exclude %{_includedir}/glusterfs/api
%exclude %{_libdir}/libgfapi.so
%{_libdir}/*.so
%if ( 0%{?_without_server:1} )
%exclude %{_libdir}/pkgconfig/libgfchangelog.pc
%exclude %{_libdir}/libgfchangelog.so
%else
%{_libdir}/pkgconfig/libgfchangelog.pc
%{_libdir}/libgfchangelog.so
%endif

%files client-xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/cluster
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/cluster/*.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/client.so

%if ( 0%{!?_without_extra_xlators:1} )
%files extra-xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quiesce.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/playground/template.so
%endif

%files fuse
# glusterfs is a symlink to glusterfsd, -server depends on -fuse.
%{_sbindir}/glusterfs
%{_sbindir}/glusterfsd
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfs
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mount/fuse.so
/sbin/mount.glusterfs
%if ( 0%{!?_without_fusermount:1} )
%{_bindir}/fusermount-glusterfs
%endif

%if ( 0%{?_with_gnfs:1} && 0%{!?_without_server:1} )
%files gnfs
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs/server.so
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/nfs
%ghost      %attr(0600,-,-) %{_sharedstatedir}/glusterd/nfs/nfs-server.vol
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/nfs/run
%ghost      %attr(0600,-,-) %{_sharedstatedir}/glusterd/nfs/run/nfs.pid
%endif

%files thin-arbiter
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/thin-arbiter.so
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/setup-thin-arbiter.sh
%config %{_sysconfdir}/glusterfs/thin-arbiter.vol

%if ( 0%{?_with_systemd:1} )
%{_unitdir}/gluster-ta-volume.service
%endif


%if ( 0%{!?_without_georeplication:1} )
%files geo-replication
%config(noreplace) %{_sysconfdir}/logrotate.d/glusterfs-georep

%{_sbindir}/gfind_missing_files
%{_sbindir}/gluster-mountbroker
%dir %{_libexecdir}/glusterfs
%dir %{_libexecdir}/glusterfs/python
%dir %{_libexecdir}/glusterfs/python/syncdaemon
     %{_libexecdir}/glusterfs/gsyncd
     %{_libexecdir}/glusterfs/python/syncdaemon/*
     %{_libexecdir}/glusterfs/gverify.sh
     %{_libexecdir}/glusterfs/set_geo_rep_pem_keys.sh
     %{_libexecdir}/glusterfs/peer_gsec_create
     %{_libexecdir}/glusterfs/peer_mountbroker
     %{_libexecdir}/glusterfs/peer_mountbroker.py*
     %{_libexecdir}/glusterfs/gfind_missing_files
     %{_libexecdir}/glusterfs/peer_georep-sshkey.py*
%{_sbindir}/gluster-georep-sshkey

       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/geo-replication
%ghost      %attr(0644,-,-) %{_sharedstatedir}/glusterd/geo-replication/gsyncd_template.conf
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/post/S56glusterd-geo-rep-create-post.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/gsync-create/pre

%dir %{_datadir}/glusterfs
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/get-gfid.sh
     %{_datadir}/glusterfs/scripts/slave-upgrade.sh
     %{_datadir}/glusterfs/scripts/gsync-upgrade.sh
     %{_datadir}/glusterfs/scripts/generate-gfid-file.sh
     %{_datadir}/glusterfs/scripts/gsync-sync-gfid
     %{_datadir}/glusterfs/scripts/schedule_georep.py*
%endif

%files libs
%{_libdir}/*.so.*
%exclude %{_libdir}/libgfapi.*

%files -n python%{_pythonver}-gluster
# introducing glusterfs module in site packages.
# so that all other gluster submodules can reside in the same namespace.
%if ( %{_usepython3} )
%dir %{python3_sitelib}/gluster
     %{python3_sitelib}/gluster/__init__.*
     %{python3_sitelib}/gluster/__pycache__
     %{python3_sitelib}/gluster/cliutils
%else
%dir %{python2_sitelib}/gluster
     %{python2_sitelib}/gluster/__init__.*
     %{python2_sitelib}/gluster/cliutils
%endif

%if ( 0%{!?_without_rdma:1} )
%files rdma
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport
     %{_libdir}/glusterfs/%{version}%{?prereltag}/rpc-transport/rdma*
%endif

%if ( 0%{!?_without_regression_tests:1} )
%files regression-tests
%dir %{_datadir}/glusterfs
     %{_datadir}/glusterfs/run-tests.sh
     %{_datadir}/glusterfs/tests
%exclude %{_datadir}/glusterfs/tests/vagrant
%endif

%if ( 0%{!?_without_ocf:1} )
%files resource-agents
# /usr/lib is the standard for OCF, also on x86_64
%{_prefix}/lib/ocf/resource.d/glusterfs
%endif

%if ( 0%{!?_without_server:1} )
%files server
%doc extras/clear_xattrs.sh
# sysconf
%config(noreplace) %{_sysconfdir}/glusterfs
%exclude %{_sysconfdir}/glusterfs/thin-arbiter.vol
%exclude %{_sysconfdir}/glusterfs/eventsconfig.json
%exclude %{_sharedstatedir}/glusterd/nfs/nfs-server.vol
%exclude %{_sharedstatedir}/glusterd/nfs/run/nfs.pid
%if ( 0%{?_with_gnfs:1} )
%exclude %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/nfs/*
%endif
%config(noreplace) %{_sysconfdir}/sysconfig/glusterd
%if ( 0%{_for_fedora_koji_builds} )
%config(noreplace) %{_sysconfdir}/sysconfig/glusterfsd
%endif

# init files
%glusterd_svcfile
%if ( 0%{_for_fedora_koji_builds} )
%glusterfsd_svcfile
%endif
%if ( 0%{?_with_systemd:1} )
%glusterfssharedstorage_svcfile
%endif

# binaries
%{_sbindir}/glusterd
%{_sbindir}/glfsheal
%{_sbindir}/gf_attach
%{_sbindir}/gluster-setgfid2path
# {_sbindir}/glusterfsd is the actual binary, but glusterfs (client) is a
# symlink. The binary itself (and symlink) are part of the glusterfs-fuse
# package, because glusterfs-server depends on that anyway.

# Manpages
%{_mandir}/man8/gluster-setgfid2path.8*

# xlators
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/arbiter.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/bit-rot.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/bitrot-stub.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/sdfs.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/index.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/locks.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/posix*
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/snapview-server.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/marker.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/quota*
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/selinux.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/trash.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/upcall.so
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/features/leases.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/mgmt/glusterd.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/protocol/server.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/storage/posix.so
%dir %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance
     %{_libdir}/glusterfs/%{version}%{?prereltag}/xlator/performance/decompounder.so

# snap_scheduler
%{_sbindir}/snap_scheduler.py
%{_sbindir}/gcron.py
%{_sbindir}/conf.py

# /var/lib/glusterd, e.g. hookscripts, etc.
%ghost      %attr(0644,-,-) %config(noreplace) %{_sharedstatedir}/glusterd/glusterd.info
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/bitd
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/groups
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/virt
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/metadata-cache
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/gluster-block
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/nl-cache
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/db-workload
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/distributed-virt
            %attr(0644,-,-) %{_sharedstatedir}/glusterd/groups/samba
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glusterfind
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glusterfind/.keys
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/glustershd
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post/disabled-quota-root-xattr-heal.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/post/S13create-subdir-mounts.sh
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/pre
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/add-brick/pre/S28Quota-enable-root-xattr-heal.sh
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/create/pre
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/copy-file/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete/post
                            %{_sharedstatedir}/glusterd/hooks/1/delete/post/S57glusterfind-delete-post
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/delete/pre
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/remove-brick/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset/post
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/reset/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post/S30samba-set.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/post/S32gluster_enable_shared_storage.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/set/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post/S29CTDBsetup.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/post/S30samba-start.sh
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/start/pre
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/post
       %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre/S30samba-stop.sh
            %attr(0755,-,-) %{_sharedstatedir}/glusterd/hooks/1/stop/pre/S29CTDB-teardown.sh
%config(noreplace) %ghost      %attr(0600,-,-) %{_sharedstatedir}/glusterd/options
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/peers
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/quotad
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/scrub
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/snaps
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/ss_brick
%ghost %dir %attr(0755,-,-) %{_sharedstatedir}/glusterd/vols

# Extra utility script
%dir %{_libexecdir}/glusterfs
     %{_datadir}/glusterfs/release
%dir %{_datadir}/glusterfs/scripts
     %{_datadir}/glusterfs/scripts/stop-all-gluster-processes.sh
%if ( 0%{?_with_systemd:1} )
     %{_libexecdir}/glusterfs/mount-shared-storage.sh
     %{_datadir}/glusterfs/scripts/control-cpu-load.sh
     %{_datadir}/glusterfs/scripts/control-mem.sh
%endif

# Incrementalapi
     %{_libexecdir}/glusterfs/glusterfind
%{_bindir}/glusterfind
     %{_libexecdir}/glusterfs/peer_add_secret_pub

%if ( 0%{?_with_firewalld:1} )
%{_prefix}/lib/firewalld/services/glusterfs.xml
%endif
# end of server files
%endif

# Events
%if ( 0%{!?_without_events:1} )
%files events
%config(noreplace) %{_sysconfdir}/glusterfs/eventsconfig.json
%dir %{_sharedstatedir}/glusterd
%dir %{_sharedstatedir}/glusterd/events
%dir %{_libexecdir}/glusterfs
     %{_libexecdir}/glusterfs/gfevents
     %{_libexecdir}/glusterfs/peer_eventsapi.py*
%{_sbindir}/glustereventsd
%{_sbindir}/gluster-eventsapi
%{_datadir}/glusterfs/scripts/eventsdash.py*
%if ( 0%{?_with_systemd:1} )
%{_unitdir}/glustereventsd.service
%else
%{_sysconfdir}/init.d/glustereventsd
%endif
%endif

##-----------------------------------------------------------------------------
## All %pretrans should be placed here and keep them sorted
##
%if 0%{!?_without_server:1}
%pretrans -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          echo "ERROR: Distribute volumes detected. In-service rolling upgrade requires distribute volume(s) to be stopped."
          echo "ERROR: Please stop distribute volume(s) before proceeding... exiting!"
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   echo "WARNING: Updating glusterfs requires its processes to be killed. This action does NOT incur downtime."
   echo "WARNING: Ensure to wait for the upgraded server to finish healing before proceeding."
   echo "WARNING: Refer upgrade section of install guide for more details"
   echo "Please run # service glusterd stop; pkill glusterfs; pkill glusterfsd; pkill gsyncd.py;"
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans api -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans api-devel -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%pretrans cli -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end


%pretrans client-xlators -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end


%pretrans fuse -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%if ( 0%{!?_without_georeplication:1} )
%pretrans geo-replication -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%pretrans libs -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end



%if ( 0%{!?_without_rdma:1} )
%pretrans rdma -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%if ( 0%{!?_without_ocf:1} )
%pretrans resource-agents -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end
%endif



%pretrans server -p <lua>
if not posix.access("/bin/bash", "x") then
    -- initial installation, no shell, no running glusterfsd
    return 0
end

-- TODO: move this completely to a lua script
-- For now, we write a temporary bash script and execute that.

script = [[#!/bin/sh
pidof -c -o %PPID -x glusterfsd &>/dev/null

if [ $? -eq 0 ]; then
   pushd . > /dev/null 2>&1
   for volume in /var/lib/glusterd/vols/*; do cd $volume;
       vol_type=`grep '^type=' info | awk -F'=' '{print $2}'`
       volume_started=`grep '^status=' info | awk -F'=' '{print $2}'`
       if [ $vol_type -eq 0 ] && [ $volume_started -eq 1 ] ; then
          exit 1;
       fi
   done

   popd > /dev/null 2>&1
   exit 1;
fi
]]

ok, how, val = os.execute(script)
if not (ok == 0) then
   error("Detected running glusterfs processes", ok)
end

%posttrans server
pidof -c -o %PPID -x glusterd &> /dev/null
if [ $? -eq 0 ]; then
    kill -9 `pgrep -f gsyncd.py` &> /dev/null

    killall --wait -SIGTERM glusterd &> /dev/null

    if [ "$?" != "0" ]; then
        echo "killall failed while killing glusterd"
    fi

    glusterd --xlator-option *.upgrade=on -N

    #Cleaning leftover glusterd socket file which is created by glusterd in
    #rpm_script_t context.
    rm -rf /var/run/glusterd.socket

    # glusterd _was_ running, we killed it, it exited after *.upgrade=on,
    # so start it again
    %service_start glusterd
else
    glusterd --xlator-option *.upgrade=on -N

    #Cleaning leftover glusterd socket file which is created by glusterd in
    #rpm_script_t context.
    rm -rf /var/run/glusterd.socket
fi

%endif

%changelog
* Mon Apr 08 2019 Milind Changire <mchangir@redhat.com> - 6.0-1
- rebase to upstream glusterfs at v6.0
- fixes bugs bz#1493284 bz#1578703 bz#1600918 bz#1670415 bz#1691620 
  bz#1693935 bz#1695057