import CS dpdk-23.11-1.el8

.dpdk.metadata

@@ -1 +1,2 @@
-9f538fb3449205bccca93073d79176636134705b SOURCES/dpdk-18.11.tar.xz
+061198752d3d8b64d33113b7c8c1e272c973403d SOURCES/dpdk-23.11.tar.xz
+3cc45b133677fbff08e89e65a2120be52ebb27a5 SOURCES/pyelftools-0.27.tar.gz

.gitignore

@@ -1 +1,2 @@
-SOURCES/dpdk-18.11.tar.xz
+SOURCES/dpdk-23.11.tar.xz
+SOURCES/pyelftools-0.27.tar.gz

SOURCES/0001-bus-vmbus-fix-race-in-subchannel-creation.patch

@@ -1,57 +0,0 @@
-From 25363eb99bc43443bec354abea1e40db61280b30 Mon Sep 17 00:00:00 2001
-From: Stephen Hemminger <sthemmin@microsoft.com>
-Date: Wed, 5 Dec 2018 14:11:56 -0800
-Subject: [PATCH 1/3] bus/vmbus: fix race in subchannel creation
-
-[ upstream commit 4970103e89f4f828669acf3b465e984fdc891e1e ]
-
-When using multiple queues, there was a race with the kernel
-in setting up the second channel. This regression is due to a kernel change
-which does not allow accessing sysfs files for Hyper-V channels that are not opened.
-
-The fix is simple, just move the logic to detect not ready
-sub channels earlier in the existing loop.
-
-Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
-
-Reported-by: Mohammed Gamal <mgamal@redhat.com>
-Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
-(cherry picked from commit ca17e6624251b05cf188997cffc3e1ab2e50561a)
-Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
----
- drivers/bus/vmbus/linux/vmbus_uio.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/bus/vmbus/linux/vmbus_uio.c b/drivers/bus/vmbus/linux/vmbus_uio.c
-index 12e97e3a4..38df4d724 100644
---- a/drivers/bus/vmbus/linux/vmbus_uio.c
-+++ b/drivers/bus/vmbus/linux/vmbus_uio.c
-@@ -357,6 +357,12 @@ int vmbus_uio_get_subchan(struct vmbus_channel *primary,
- 			continue;
- 		}
- 
-+		if (!vmbus_isnew_subchannel(primary, relid))
-+			continue;	/* Already know about you */
-+
-+		if (!vmbus_uio_ring_present(dev, relid))
-+			continue;	/* Ring may not be ready yet */
-+
- 		snprintf(subchan_path, sizeof(subchan_path), "%s/%lu",
- 			 chan_path, relid);
- 		err = vmbus_uio_sysfs_read(subchan_path, "subchannel_id",
-@@ -370,12 +376,6 @@ int vmbus_uio_get_subchan(struct vmbus_channel *primary,
- 		if (subid == 0)
- 			continue;	/* skip primary channel */
- 
--		if (!vmbus_isnew_subchannel(primary, relid))
--			continue;
--
--		if (!vmbus_uio_ring_present(dev, relid))
--			continue;	/* Ring may not be ready yet */
--
- 		err = vmbus_uio_sysfs_read(subchan_path, "monitor_id",
- 					   &monid, UINT8_MAX);
- 		if (err) {
--- 
-2.20.1
-

SOURCES/0002-net-netvsc-enable-SR-IOV.patch

@@ -1,38 +0,0 @@
-From da9c7a3059fb4cffef8d1101a247fafabd9be7bd Mon Sep 17 00:00:00 2001
-From: Stephen Hemminger <sthemmin@microsoft.com>
-Date: Wed, 5 Dec 2018 14:11:57 -0800
-Subject: [PATCH 2/3] net/netvsc: enable SR-IOV
-
-[ upstream commit 825ab257b5ce8235ab0cdc260e5b7b757e102875 ]
-
-Make DPDK enable SRIOV flag in same way as Linux and FreeBSD.
-
-Fixes: dc7680e8597c ("net/netvsc: support integrated VF")
-
-Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
-(cherry picked from commit 21dc946c2b5524c7e6ec1fe4079864f3322dd483)
-Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
----
- drivers/net/netvsc/hn_nvs.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/net/netvsc/hn_nvs.c b/drivers/net/netvsc/hn_nvs.c
-index 9690c5f8a..d58770e04 100644
---- a/drivers/net/netvsc/hn_nvs.c
-+++ b/drivers/net/netvsc/hn_nvs.c
-@@ -326,9 +326,9 @@ hn_nvs_conf_ndis(struct hn_data *hv, unsigned int mtu)
- 	conf.mtu = mtu + ETHER_HDR_LEN;
- 	conf.caps = NVS_NDIS_CONF_VLAN;
- 
--	/* TODO enable SRIOV */
--	//if (hv->nvs_ver >= NVS_VERSION_5)
--	//	conf.caps |= NVS_NDIS_CONF_SRIOV;
-+	/* enable SRIOV */
-+	if (hv->nvs_ver >= NVS_VERSION_5)
-+		conf.caps |= NVS_NDIS_CONF_SRIOV;
- 
- 	/* NOTE: No response. */
- 	error = hn_nvs_req_send(hv, &conf, sizeof(conf));
--- 
-2.20.1
-

SOURCES/0003-net-netvsc-disable-multi-queue-on-older-servers.patch

@@ -1,46 +0,0 @@
-From 0598625d2e17374b7d5693972f5acb59fef25f63 Mon Sep 17 00:00:00 2001
-From: Stephen Hemminger <sthemmin@microsoft.com>
-Date: Wed, 5 Dec 2018 14:11:58 -0800
-Subject: [PATCH 3/3] net/netvsc: disable multi-queue on older servers
-
-[ upstream commit afbc22bf51ab98b9b61b11eb6d38278a9d577111 ]
-
-NDIS multi-queue support is only in WS2012 or later. Check the NDIS
-version to limit to single queue on older versions. Similar code
-exists in Linux driver.
-
-Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
-
-Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
-(cherry picked from commit d387b7ae45a520970ff55ea6ce75b48d5e69c4d9)
-Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
----
- drivers/net/netvsc/hn_ethdev.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/drivers/net/netvsc/hn_ethdev.c b/drivers/net/netvsc/hn_ethdev.c
-index b330bf3d7..1256fa399 100644
---- a/drivers/net/netvsc/hn_ethdev.c
-+++ b/drivers/net/netvsc/hn_ethdev.c
-@@ -732,6 +732,7 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)
- 	hv->chim_res  = &vmbus->resource[HV_SEND_BUF_MAP];
- 	hv->port_id = eth_dev->data->port_id;
- 	hv->latency = HN_CHAN_LATENCY_NS;
-+	hv->max_queues = 1;
- 
- 	err = hn_parse_args(eth_dev);
- 	if (err)
-@@ -770,6 +771,10 @@ eth_hn_dev_init(struct rte_eth_dev *eth_dev)
- 	if (err)
- 		goto failed;
- 
-+	/* Multi queue requires later versions of windows server */
-+	if (hv->nvs_ver < NVS_VERSION_5)
-+		return 0;
-+
- 	max_chan = rte_vmbus_max_channels(vmbus);
- 	PMD_INIT_LOG(DEBUG, "VMBus max channels %d", max_chan);
- 	if (max_chan <= 0)
--- 
-2.20.1
-

SOURCES/arm64-armv8a-linuxapp-gcc-config

@@ -1,540 +0,0 @@
-# -*- cfg-sha: 9fc8b53ccd53cc8b64391f6252e1dba558ae660a73a72f10dcadff2ca5462243
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2015 Cavium, Inc
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2017 Cavium, Inc
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2016 Intel Corporation
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2017 Intel Corporation
-# RTE_EXEC_ENV values are the directories in mk/exec-env/
-CONFIG_RTE_EXEC_ENV="linuxapp"
-# RTE_ARCH values are architecture we compile for. directories in mk/arch/
-CONFIG_RTE_ARCH="arm64"
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
-CONFIG_RTE_MACHINE="armv8a"
-# The compiler we use.
-# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
-CONFIG_RTE_TOOLCHAIN="gcc"
-# Use intrinsics or assembly code for key routines
-CONFIG_RTE_FORCE_INTRINSICS=y
-# Machine forces strict alignment constraints.
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-# Compile to share library
-CONFIG_RTE_BUILD_SHARED_LIB=y
-# Use newest code breaking previous ABI
-CONFIG_RTE_NEXT_ABI=n
-# Major ABI to overwrite library specific LIBABIVER
-CONFIG_RTE_MAJOR_ABI=
-# Machine's cache line size
-CONFIG_RTE_CACHE_LINE_SIZE=128
-# Memory model
-CONFIG_RTE_USE_C11_MEM_MODEL=y
-# Compile Environment Abstraction Layer
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=256
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_HEAPS=32
-CONFIG_RTE_MAX_MEMSEG_LISTS=64
-# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
-# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
-CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
-# a "type" is a combination of page size and NUMA node. total number of memseg
-# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
-# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
-# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
-# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
-CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
-# global maximum usable amount of VA, in megabytes
-CONFIG_RTE_MAX_MEM_MB=524288
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_ENABLE_ASSERT=n
-CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_BACKTRACE=y
-CONFIG_RTE_LIBEAL_USE_HPET=n
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_EAL_IGB_UIO=n
-CONFIG_RTE_EAL_VFIO=y
-CONFIG_RTE_MAX_VFIO_GROUPS=64
-CONFIG_RTE_MAX_VFIO_CONTAINERS=64
-CONFIG_RTE_MALLOC_DEBUG=n
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
-CONFIG_RTE_USE_LIBBSD=n
-# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
-# AVX512 is marked as experimental for now, will enable it after enough
-# field test and possible optimization.
-CONFIG_RTE_ENABLE_AVX=y
-CONFIG_RTE_ENABLE_AVX512=n
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
-# Compile Environment Abstraction Layer to support Vmware TSC map
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-# Compile architecture we compile for. PCI library
-CONFIG_RTE_LIBRTE_PCI=y
-# Compile architecture we compile for. argument parser library
-CONFIG_RTE_LIBRTE_KVARGS=y
-# Compile generic ethernet library
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
-# Turn off Tx preparation stage
-# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
-# driver which do not implement any Tx preparation.
-CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
-# Common libraries, before Bus/PMDs
-CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
-# Compile architecture we compile for. Intel FPGA bus
-CONFIG_RTE_LIBRTE_IFPGA_BUS=n
-# Compile PCI bus driver
-CONFIG_RTE_LIBRTE_PCI_BUS=y
-# Compile architecture we compile for. vdev bus
-CONFIG_RTE_LIBRTE_VDEV_BUS=y
-# Compile ARK PMD
-CONFIG_RTE_LIBRTE_ARK_PMD=n
-CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
-CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
-# Compile Aquantia Atlantic PMD driver
-CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
-# Compile AMD PMD
-CONFIG_RTE_LIBRTE_AXGBE_PMD=n
-CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
-# Compile burst-oriented Broadcom PMD driver
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-# Compile burst-oriented Broadcom BNXT PMD driver
-CONFIG_RTE_LIBRTE_BNXT_PMD=n
-# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
-CONFIG_RTE_LIBRTE_CXGBE_PMD=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
-# NXP DPAA Bus
-CONFIG_RTE_LIBRTE_DPAA_BUS=n
-CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA_PMD=n
-CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
-# Compile NXP DPAA2 FSL-MC Bus
-CONFIG_RTE_LIBRTE_FSLMC_BUS=n
-# Compile Support Libraries for NXP DPAA2
-CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
-# Compile burst-oriented NXP DPAA2 PMD driver
-CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-# Compile NXP ENETC PMD Driver
-CONFIG_RTE_LIBRTE_ENETC_PMD=n
-# Compile burst-oriented Amazon ENA PMD driver
-CONFIG_RTE_LIBRTE_ENA_PMD=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
-# Compile burst-oriented Cisco ENIC PMD driver
-CONFIG_RTE_LIBRTE_ENIC_PMD=n
-# Compile burst-oriented IGB & EM PMD drivers
-CONFIG_RTE_LIBRTE_EM_PMD=n
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-# Compile burst-oriented IXGBE PMD driver
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
-# Compile burst-oriented I40E PMD driver
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# Compile burst-oriented FM10K PMD
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
-# Compile burst-oriented AVF PMD driver
-CONFIG_RTE_LIBRTE_AVF_PMD=n
-CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
-# (MLX5) PMD
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-# Compile burst-oriented Netronome NFP PMD driver
-CONFIG_RTE_LIBRTE_NFP_PMD=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
-# QLogic 10G/25G/40G/50G/100G PMD
-CONFIG_RTE_LIBRTE_QEDE_PMD=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
-#Provides abs path/name of architecture we compile for. firmware file.
-#Empty string denotes driver will use default firmware
-CONFIG_RTE_LIBRTE_QEDE_FW=""
-# Compile burst-oriented Solarflare libefx-based PMD
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
-# Compile software PMD backed by SZEDATA2 device
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-# Compile burst-oriented Cavium Thunderx NICVF PMD driver
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
-# Compile burst-oriented Cavium LiquidIO PMD driver
-CONFIG_RTE_LIBRTE_LIO_PMD=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
-# Compile burst-oriented Cavium OCTEONTX network PMD driver
-CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
-# Compile WRS accelerated virtual port (AVP) guest PMD driver
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
-# Compile burst-oriented VIRTIO PMD driver
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-# Compile virtio device emulation inside virtio PMD driver
-CONFIG_RTE_VIRTIO_USER=n
-# Compile burst-oriented VMXNET3 PMD driver
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
-# Compile link bonding PMD library
-CONFIG_RTE_LIBRTE_PMD_BOND=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-# Compile fail-safe PMD
-CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
-# Compile Marvell PMD driver
-CONFIG_RTE_LIBRTE_MVPP2_PMD=n
-# Compile Marvell MVNETA PMD driver
-CONFIG_RTE_LIBRTE_MVNETA_PMD=n
-# Compile support for VMBus library
-CONFIG_RTE_LIBRTE_VMBUS=n
-# Compile native PMD for Hyper-V/Azure
-CONFIG_RTE_LIBRTE_NETVSC_PMD=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
-# Compile virtual device driver for NetVSC on Hyper-V/Azure
-CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
-# Compile null PMD
-CONFIG_RTE_LIBRTE_PMD_NULL=n
-# Compile software PMD backed by PCAP files
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
-# Compile example software rings based PMD
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-# Compile SOFTNIC PMD
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
-# Compile architecture we compile for. TAP PMD
-# It is enabled by default for Linux only.
-CONFIG_RTE_LIBRTE_PMD_TAP=y
-# Do prefetch of packet data within PMD driver receive function
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-# Compile generic wireless base band device library
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_BBDEV=n
-CONFIG_RTE_BBDEV_MAX_DEVS=128
-CONFIG_RTE_BBDEV_OFFLOAD_COST=n
-# Compile PMD for NULL bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
-# Compile PMD for turbo software bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
-# Compile generic crypto device library
-CONFIG_RTE_LIBRTE_CRYPTODEV=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-# Compile PMD for ARMv8 Crypto device
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
-# Compile NXP CAAM JR crypto Driver
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
-# Compile NXP DPAA2 crypto sec driver for CAAM HW
-CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-# NXP DPAA caam - crypto driver
-CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-# Compile PMD for Cavium OCTEON TX crypto device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
-# Compile PMD for QuickAssist based devices - see docs for details
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
-# Max. number of QuickAssist devices, which can be detected and attached
-CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
-CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
-CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
-# Compile PMD for virtio crypto devices
-CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
-# Number of maximum virtio crypto devices
-CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-# Compile PMD for AESNI backed device
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-# Compile PMD for Software backed device
-CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-# Compile PMD for AESNI GCM device
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-# Compile PMD for SNOW 3G device
-CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
-CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
-# Compile PMD for KASUMI device
-CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-# Compile PMD for ZUC device
-CONFIG_RTE_LIBRTE_PMD_ZUC=n
-# Compile PMD for Crypto Scheduler device
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
-# Compile PMD for NULL Crypto device
-CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
-# Compile PMD for AMD CCP crypto device
-CONFIG_RTE_LIBRTE_PMD_CCP=n
-# Compile PMD for Marvell Crypto device
-CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
-# Compile generic security library
-CONFIG_RTE_LIBRTE_SECURITY=n
-# Compile generic compression device library
-CONFIG_RTE_LIBRTE_COMPRESSDEV=n
-CONFIG_RTE_COMPRESS_MAX_DEVS=64
-# Compile compressdev unit test
-CONFIG_RTE_COMPRESSDEV_TEST=n
-# Compile PMD for Octeontx ZIPVF compression device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
-# Compile PMD for ISA-L compression device
-CONFIG_RTE_LIBRTE_PMD_ISAL=n
-# Compile PMD for ZLIB compression device
-CONFIG_RTE_LIBRTE_PMD_ZLIB=n
-# Compile generic event device library
-CONFIG_RTE_LIBRTE_EVENTDEV=n
-CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
-CONFIG_RTE_EVENT_MAX_DEVS=16
-CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
-CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
-CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
-CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
-CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
-# Compile PMD for skeleton event device
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
-# Compile PMD for software event device
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
-# Compile PMD for distributed software event device
-CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
-# Compile PMD for octeontx sso event device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
-# Compile PMD for OPDL event device
-CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
-# Compile PMD for NXP DPAA event device
-CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
-# Compile PMD for NXP DPAA2 event device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
-# Compile raw device support
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_RAWDEV=n
-CONFIG_RTE_RAWDEV_MAX_DEVS=10
-CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
-# Compile PMD for NXP DPAA2 CMDIF raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
-# Compile PMD for NXP DPAA2 QDMA raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
-# Compile PMD for Intel FPGA raw device
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
-# Compile librte_ring
-CONFIG_RTE_LIBRTE_RING=y
-# Compile librte_mempool
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-# Compile Mempool drivers
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
-CONFIG_RTE_DRIVER_MEMPOOL_RING=y
-CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
-# Compile PMD for octeontx fpa mempool device
-CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
-# Compile librte_mbuf
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-# Compile librte_timer
-CONFIG_RTE_LIBRTE_TIMER=n
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-# Compile librte_cfgfile
-CONFIG_RTE_LIBRTE_CFGFILE=n
-# Compile librte_cmdline
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-# Compile librte_hash
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-# Compile librte_efd
-CONFIG_RTE_LIBRTE_EFD=n
-# Compile librte_member
-CONFIG_RTE_LIBRTE_MEMBER=y
-# Compile librte_jobstats
-CONFIG_RTE_LIBRTE_JOBSTATS=n
-# Compile architecture we compile for. device metrics library
-CONFIG_RTE_LIBRTE_METRICS=y
-# Compile architecture we compile for. bitrate statistics library
-CONFIG_RTE_LIBRTE_BITRATE=y
-# Compile architecture we compile for. latency statistics library
-CONFIG_RTE_LIBRTE_LATENCY_STATS=y
-# Compile librte_telemetry
-CONFIG_RTE_LIBRTE_TELEMETRY=n
-# Compile librte_lpm
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-# Compile librte_acl
-CONFIG_RTE_LIBRTE_ACL=n
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-# Compile librte_power
-CONFIG_RTE_LIBRTE_POWER=n
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-# Compile librte_net
-CONFIG_RTE_LIBRTE_NET=y
-# Compile librte_ip_frag
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-# Compile GRO library
-CONFIG_RTE_LIBRTE_GRO=y
-# Compile GSO library
-CONFIG_RTE_LIBRTE_GSO=y
-# Compile librte_meter
-CONFIG_RTE_LIBRTE_METER=y
-# Compile librte_classify
-CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
-# Compile librte_sched
-CONFIG_RTE_LIBRTE_SCHED=n
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-# Compile architecture we compile for. distributor library
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
-# Compile architecture we compile for. reorder library
-CONFIG_RTE_LIBRTE_REORDER=n
-# Compile librte_port
-CONFIG_RTE_LIBRTE_PORT=n
-CONFIG_RTE_PORT_STATS_COLLECT=n
-CONFIG_RTE_PORT_PCAP=n
-# Compile librte_table
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-# Compile librte_pipeline
-CONFIG_RTE_LIBRTE_PIPELINE=n
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-# Compile librte_kni
-CONFIG_RTE_LIBRTE_KNI=n
-CONFIG_RTE_LIBRTE_PMD_KNI=n
-CONFIG_RTE_KNI_KMOD=n
-CONFIG_RTE_KNI_KMOD_ETHTOOL=n
-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-# Compile architecture we compile for. pdump library
-CONFIG_RTE_LIBRTE_PDUMP=y
-# Compile vhost user library
-CONFIG_RTE_LIBRTE_VHOST=y
-CONFIG_RTE_LIBRTE_VHOST_NUMA=y
-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
-# Compile vhost PMD
-# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
-CONFIG_RTE_LIBRTE_PMD_VHOST=y
-# Compile IFC driver
-# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
-# should be enabled.
-CONFIG_RTE_LIBRTE_IFC_PMD=n
-# Compile librte_bpf
-CONFIG_RTE_LIBRTE_BPF=n
-# allow load BPF from ELF files (requires libelf)
-CONFIG_RTE_LIBRTE_BPF_ELF=n
-# Compile architecture we compile for. test application
-CONFIG_RTE_APP_TEST=y
-CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
-# Compile architecture we compile for. procinfo application
-CONFIG_RTE_PROC_INFO=y
-# Compile architecture we compile for. PMD test application
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
-# Compile architecture we compile for. bbdev test application
-CONFIG_RTE_TEST_BBDEV=n
-# Compile architecture we compile for. crypto performance application
-CONFIG_RTE_APP_CRYPTO_PERF=n
-# Compile architecture we compile for. eventdev application
-CONFIG_RTE_APP_EVENTDEV=n
-CONFIG_RTE_EXEC_ENV_LINUXAPP=y
-CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
-# Common libraries, before Bus/PMDs
-# NXP DPAA BUS and drivers
-# NXP FSLMC BUS and DPAA2 drivers
-# NXP ENETC PMD Driver
-CONFIG_RTE_ARCH_ARM64=y
-CONFIG_RTE_ARCH_64=y
-# Maximum available cache line size in arm64 implementations.
-# Setting to maximum available cache line size in generic config
-# to address minimum DMA alignment across all arm64 implementations.
-# Accelarate rte_memcpy. Be sure to run unit test (memcpy_perf_autotest)
-# to determine architecture we compile for. best threshold in code. Refer to notes in source file
-# (lib/librte_eal/common/include/arch/arm/rte_memcpy_64.h) for more info.
-CONFIG_RTE_ARCH_ARM64_MEMCPY=n
-#CONFIG_RTE_ARM64_MEMCPY_ALIGNED_THRESHOLD=2048
-#CONFIG_RTE_ARM64_MEMCPY_UNALIGNED_THRESHOLD=512
-# Leave below RTE_ARM64_MEMCPY_xxx options commented out, unless there're
-# strong reasons.
-#CONFIG_RTE_ARM64_MEMCPY_SKIP_GCC_VER_CHECK=n
-#CONFIG_RTE_ARM64_MEMCPY_ALIGN_MASK=0xF
-#CONFIG_RTE_ARM64_MEMCPY_STRICT_ALIGN=n
-CONFIG_RTE_TOOLCHAIN_GCC=y
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

SOURCES/configlib.sh

@@ -1,104 +0,0 @@
-# Copyright (C) 2017, Red Hat, Inc.
-#
-# Core configuration file library.
-
-# Configurations are determined by sha values.  The way to determine is by
-# the special text:
-# $FILE_COMMENT_TYPE -*- cfg-sha: $SHA256 -*-
-
-export LC_ALL=C
-
-# check required binaries
-__check_reqd_binaries() {
-    local BIN __binaries=("egrep" "sort" "sha256sum" "sed")
-    for BIN in $__binaries; do
-        if ! type -P $BIN >/dev/null 2>&1; then
-            echo "Binary $BIN not found.  Please install."
-            exit 1
-        fi
-    done
-}
-
-# Calculates a sha from a file
-# The algorithm for generating a sha from a config is thus:
-#
-# 1. Remove all comment lines and blank lines
-# 2. Sort the content
-# 3. generate the sha-256 sum
-#
-# From a script perspective, this means:
-#   egrep -v ^\# %file% | egrep -v ^$ | sort -u | sha256sum
-#
-# Params:
-#  $1 = output variable
-#  $2 = file to use to calculate the shasum
-#  $3 = file comment type (defaults to # if unspecified)
-calc_sha() {
-    __check_reqd_binaries
-
-    if [ "$1" == "" ]; then
-        echo "Please pass in a storage variable."
-        return 1
-    fi
-
-    local __resultvar=$1
-    __retval=1
-    shift
-
-    local __file=$1
-    local cmnt=${2:-#}
-
-    if [ -f "$__file" ]; then
-        local __shasum=$(egrep -v ^"$cmnt" "$__file" | egrep -v ^$ | sort -u | sha256sum -t | cut -d" " -f1)
-        eval $__resultvar="'$__shasum'"
-        __retval=0
-    fi
-    return $__retval
-}
-
-# Retrieves a sha stored in a file
-# Param:
-#  $1 = output variable
-#  $2 = file to use to calculate the shasum
-#  $3 = file comment type (defaults to # if unspecified)
-retr_sha() {
-    __check_reqd_binaries
-
-    if [ "$1" == "" ]; then
-        echo "Please pass in a storage variable."
-        return 1
-    fi
-
-    local __resultvar=$1
-    __retval=1
-    shift
-
-    local __file=$1
-    local cmnt=${2:-#}
-
-    if [ -f "$__file" ]; then
-        if grep -q "$cmnt -\*- cfg-sha:" "$__file"; then
-            local __shasum=$(grep "$cmnt -\*- cfg-sha:" "$__file" | sed -e "s@$cmnt -\*- cfg-sha: @@" | cut -d" " -f1)
-            eval $__resultvar="'$__shasum'"
-            __retval=0
-        fi
-    fi
-    return $__retval
-}
-
-
-# Set a config value
-# set_conf dpdk_build_tree parameter value
-# dpdk_build_tree is the directory where the .config lives
-# parameter is the config parameter
-# value is the value to set for the config parameter
-set_conf() {
-    c="$1/.config"
-    shift
-
-    if grep -q "$1" "$c"; then
-        sed -i "s:^$1=.*$:$1=$2:g" $c
-    else
-        echo $1=$2 >> "$c"
-    fi
-}

SOURCES/gen_config_group.sh

@@ -1,225 +0,0 @@
-#!/bin/bash
-
-source configlib.sh
-
-# Generates arch configurations in the current directory based on
-# 1. an dpdk.spec file
-# 2. an expanded dpdk tree
-
-if (( $# != 2 )); then
-    echo "$0: dpdk.spec dpdk_tree" >&2
-    exit 1
-fi
-
-DPDKSPEC="$1"
-DPDKDIR="$2"
-
-# accumulate all arch + name triples
-DPDK_CONF_MACH_ARCH=()
-for arch in $(grep %define\ machine_arch "$DPDKSPEC" | sed 's@%define machine_arch @@')
-do
-    DPDK_CONF_MACH_ARCH+=($arch)
-done
-
-DPDK_CONF_MACH_TMPL=()
-for tmpl in $(grep %define\ machine_tmpl "$DPDKSPEC" | sed 's@%define machine_tmpl @@')
-do
-    DPDK_CONF_MACH_TMPL+=($tmpl)
-done
-
-DPDK_CONF_MACH=()
-for mach in $(grep %define\ machine\  "$DPDKSPEC" | sed 's@%define machine @@')
-do
-    DPDK_CONF_MACH+=($mach)
-done
-
-DPDK_TARGETS=()
-for ((i=0; i < ${#DPDK_CONF_MACH[@]}; i++));
-do
-    DPDK_TARGETS+=("${DPDK_CONF_MACH_ARCH[$i]}-${DPDK_CONF_MACH_TMPL[$i]}-linuxapp-gcc")
-    echo "DPDK-target: ${DPDK_TARGETS[$i]}"
-done
-
-OUTPUT_DIR=$(pwd)
-pushd "$DPDKDIR"
-for ((i=0; i < ${#DPDK_TARGETS[@]}; i++));
-do
-    echo "For ${DPDK_TARGETS[$i]}:"
-
-    echo "     a. Generating initial config"
-    echo "        make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]}"
-    make V=1 T=${DPDK_TARGETS[$i]} O=${DPDK_TARGETS[$i]} -j8 config
-    ORIG_SHA=""
-    OUTDIR="${DPDK_TARGETS[$i]}"
-
-    echo "     b. calculating and applying sha"
-    calc_sha ORIG_SHA "${OUTDIR}/.config"
-    if [ "$ORIG_SHA" == "" ]; then
-        echo "ERROR: Unable to get sha for arch ${DPDK_TARGETS[$i]}"
-        exit 1
-    fi
-    echo "# -*- cfg-sha: ${ORIG_SHA}" > ${OUTDIR}/.config.new
-    cat "${OUTDIR}/.config" >> "${OUTDIR}/.config.new"
-    cp "${OUTDIR}/.config" "${OUTDIR}/.config.orig"
-    mv -f "${OUTDIR}/.config.new" "${OUTDIR}/.config"
-
-    echo "     c. setting initial configurations"
-    # these are the original setconf values from dpdk.spec
-    set_conf "${OUTDIR}" CONFIG_RTE_MACHINE "\\\"${DPDK_CONF_MACH[$i]}\\\""
-
-    # Enable automatic driver loading from this path
-    set_conf "${OUTDIR}" CONFIG_RTE_EAL_PMD_PATH '"/usr/lib64/dpdk-pmds"'
-
-    # Disable DPDK libraries not needed
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TIMER n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_JOBSTATS n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_LPM n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ACL n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_POWER n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SCHED n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DISTRIBUTOR n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_REORDER n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PORT n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_TABLE n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PIPELINE n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_KNI n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CRYPTODEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_SECURITY n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BBDEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMPRESSDEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BPF n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA_MEMPOOL n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_CFGFILE n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_EFD n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_FLOW_CLASSIFY n
-
-    # Disable all eventdevs
-    for eventdev in $(grep _EVENTDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
-    do
-        set_conf "${OUTDIR}" $eventdev n
-    done
-
-    # Disable all rawdevs
-    for rawdev in $(grep _RAWDEV= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
-    do
-        set_conf "${OUTDIR}" $rawdev n
-    done
-
-    # Disable virtio user
-    set_conf "${OUTDIR}" CONFIG_RTE_VIRTIO_USER n
-
-    # Enable vhost numa as libnuma dep is ok
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VHOST_NUMA y
-
-    # start by disabling ALL PMDs
-    for pmd in $(grep _PMD= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
-    do
-        set_conf "${OUTDIR}" $pmd n
-    done
-
-    # PMDs which have their own naming scheme
-    # the default for this was 'n' at one point.  Make sure we keep it
-    # as such
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_QAT n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_KNI n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_XENVIRT n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_NULL n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_PCAP n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_BOND n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_AF_PACKET n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_SOFTNIC n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_DPAA_SEC n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_COMMON_DPAAX n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR n
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE n
-
-    # whitelist of enabled PMDs
-    # Soft PMDs to enable
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_RING y
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_VHOST y
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VIRTIO_PMD y
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_TAP y
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PMD_FAILSAFE y
-
-
-    # start by disabling all buses
-    for bus in $(grep _BUS= "${OUTDIR}/.config" | sed 's@=\(y\|n\)@@g')
-    do
-        set_conf "${OUTDIR}" $bus n
-    done
-
-    # blacklist buses that don't conform to std naming
-    # May override VMBUS later in arch specific section
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS n
-
-    # whitelist buses
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_PCI_BUS y
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_BUS y
-
-
-    # Disable some other miscellanous items related to test apps
-    set_conf "${OUTDIR}" CONFIG_RTE_TEST_BBDEV n
-    set_conf "${OUTDIR}" CONFIG_RTE_APP_CRYPTO_PERF n
-
-    # Disable kernel modules
-    set_conf "${OUTDIR}" CONFIG_RTE_EAL_IGB_UIO n
-    set_conf "${OUTDIR}" CONFIG_RTE_KNI_KMOD n
-
-    # Disable experimental stuff
-    set_conf "${OUTDIR}" CONFIG_RTE_NEXT_ABI n
-
-    # Build DPDK as shared library
-    set_conf "${OUTDIR}" CONFIG_RTE_BUILD_SHARED_LIB y
-
-    # Compile the PMD test application
-    set_conf "${OUTDIR}" CONFIG_RTE_TEST_PMD y
-
-    # Arch specific
-    set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_I40E_PMD y
-    case "${DPDK_CONF_MACH_ARCH[i]}" in
-    x86_64)
-        # Hw PMD
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_BNXT_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_ENIC_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX4_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX5_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NFP_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_QEDE_PMD y
-        # Sw PMD
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_NETVSC_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD y
-        # Bus
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_VMBUS y
-        ;&
-    arm64)
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IXGBE_PMD y
-        set_conf "${OUTDIR}" CONFIG_RTE_LIBRTE_IGB_PMD y
-        ;;
-    esac
-
-    cp "${OUTDIR}/.config" "${OUTPUT_DIR}/${DPDK_TARGETS[$i]}-config"
-done
-popd >/dev/null
-
-echo -n "For each arch ( "
-for ((i=0; i < ${#DPDK_CONF_MACH_ARCH[@]}; i++));
-do
-    echo -n "${DPDK_CONF_MACH_ARCH[i]} "
-done
-echo "):"
-echo "1. ensure you enable the requisite hw"

SOURCES/ppc_64-power8-linuxapp-gcc-config

@@ -1,550 +0,0 @@
-# -*- cfg-sha: ac783e64ca20c977a7c1c42e72e6dce151b31aa9aecfbfa121b45e49e938f418
-# BSD LICENSE
-# Copyright (C) IBM Corporation 2014.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of IBM Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2016 Intel Corporation
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2017 Intel Corporation
-# RTE_EXEC_ENV values are the directories in mk/exec-env/
-CONFIG_RTE_EXEC_ENV="linuxapp"
-# RTE_ARCH values are architecture we compile for. directories in mk/arch/
-CONFIG_RTE_ARCH="ppc_64"
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
-CONFIG_RTE_MACHINE="power8"
-# The compiler we use.
-# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
-CONFIG_RTE_TOOLCHAIN="gcc"
-# Use intrinsics or assembly code for key routines
-CONFIG_RTE_FORCE_INTRINSICS=n
-# Machine forces strict alignment constraints.
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-# Compile to share library
-CONFIG_RTE_BUILD_SHARED_LIB=y
-# Use newest code breaking previous ABI
-CONFIG_RTE_NEXT_ABI=n
-# Major ABI to overwrite library specific LIBABIVER
-CONFIG_RTE_MAJOR_ABI=
-# Machine's cache line size
-CONFIG_RTE_CACHE_LINE_SIZE=128
-# Memory model
-CONFIG_RTE_USE_C11_MEM_MODEL=n
-# Compile Environment Abstraction Layer
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=256
-CONFIG_RTE_MAX_NUMA_NODES=32
-CONFIG_RTE_MAX_HEAPS=32
-CONFIG_RTE_MAX_MEMSEG_LISTS=64
-# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
-# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
-CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
-# a "type" is a combination of page size and NUMA node. total number of memseg
-# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
-# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
-# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
-# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
-CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
-# global maximum usable amount of VA, in megabytes
-CONFIG_RTE_MAX_MEM_MB=524288
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_ENABLE_ASSERT=n
-CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_BACKTRACE=y
-CONFIG_RTE_LIBEAL_USE_HPET=n
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_EAL_IGB_UIO=n
-CONFIG_RTE_EAL_VFIO=y
-CONFIG_RTE_MAX_VFIO_GROUPS=64
-CONFIG_RTE_MAX_VFIO_CONTAINERS=64
-CONFIG_RTE_MALLOC_DEBUG=n
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
-CONFIG_RTE_USE_LIBBSD=n
-# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
-# AVX512 is marked as experimental for now, will enable it after enough
-# field test and possible optimization.
-CONFIG_RTE_ENABLE_AVX=y
-CONFIG_RTE_ENABLE_AVX512=n
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
-# Compile Environment Abstraction Layer to support Vmware TSC map
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
-# Compile architecture we compile for. PCI library
-CONFIG_RTE_LIBRTE_PCI=y
-# Compile architecture we compile for. argument parser library
-CONFIG_RTE_LIBRTE_KVARGS=y
-# Compile generic ethernet library
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
-# Turn off Tx preparation stage
-# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
-# driver which do not implement any Tx preparation.
-CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
-# Common libraries, before Bus/PMDs
-CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
-# Compile architecture we compile for. Intel FPGA bus
-CONFIG_RTE_LIBRTE_IFPGA_BUS=n
-# Compile PCI bus driver
-CONFIG_RTE_LIBRTE_PCI_BUS=y
-# Compile architecture we compile for. vdev bus
-CONFIG_RTE_LIBRTE_VDEV_BUS=y
-# Compile ARK PMD
-CONFIG_RTE_LIBRTE_ARK_PMD=n
-CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
-CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
-# Compile Aquantia Atlantic PMD driver
-CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
-# Compile AMD PMD
-CONFIG_RTE_LIBRTE_AXGBE_PMD=n
-CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
-# Compile burst-oriented Broadcom PMD driver
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-# Compile burst-oriented Broadcom BNXT PMD driver
-CONFIG_RTE_LIBRTE_BNXT_PMD=n
-# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
-CONFIG_RTE_LIBRTE_CXGBE_PMD=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
-# NXP DPAA Bus
-CONFIG_RTE_LIBRTE_DPAA_BUS=n
-CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA_PMD=n
-CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
-# Compile NXP DPAA2 FSL-MC Bus
-CONFIG_RTE_LIBRTE_FSLMC_BUS=n
-# Compile Support Libraries for NXP DPAA2
-CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
-# Compile burst-oriented NXP DPAA2 PMD driver
-CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-# Compile NXP ENETC PMD Driver
-CONFIG_RTE_LIBRTE_ENETC_PMD=n
-# Compile burst-oriented Amazon ENA PMD driver
-CONFIG_RTE_LIBRTE_ENA_PMD=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
-# Compile burst-oriented Cisco ENIC PMD driver
-CONFIG_RTE_LIBRTE_ENIC_PMD=n
-# Compile burst-oriented IGB & EM PMD drivers
-CONFIG_RTE_LIBRTE_EM_PMD=n
-CONFIG_RTE_LIBRTE_IGB_PMD=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-# Compile burst-oriented IXGBE PMD driver
-CONFIG_RTE_LIBRTE_IXGBE_PMD=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
-# Compile burst-oriented I40E PMD driver
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# Compile burst-oriented FM10K PMD
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
-# Compile burst-oriented AVF PMD driver
-CONFIG_RTE_LIBRTE_AVF_PMD=n
-CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
-# (MLX5) PMD
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-# Compile burst-oriented Netronome NFP PMD driver
-CONFIG_RTE_LIBRTE_NFP_PMD=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
-# QLogic 10G/25G/40G/50G/100G PMD
-CONFIG_RTE_LIBRTE_QEDE_PMD=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
-#Provides abs path/name of architecture we compile for. firmware file.
-#Empty string denotes driver will use default firmware
-CONFIG_RTE_LIBRTE_QEDE_FW=""
-# Compile burst-oriented Solarflare libefx-based PMD
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
-# Compile software PMD backed by SZEDATA2 device
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-# Compile burst-oriented Cavium Thunderx NICVF PMD driver
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
-# Compile burst-oriented Cavium LiquidIO PMD driver
-CONFIG_RTE_LIBRTE_LIO_PMD=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
-# Compile burst-oriented Cavium OCTEONTX network PMD driver
-CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
-# Compile WRS accelerated virtual port (AVP) guest PMD driver
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
-# Compile burst-oriented VIRTIO PMD driver
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-# Compile virtio device emulation inside virtio PMD driver
-CONFIG_RTE_VIRTIO_USER=n
-# Compile burst-oriented VMXNET3 PMD driver
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
-# Compile link bonding PMD library
-CONFIG_RTE_LIBRTE_PMD_BOND=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-# Compile fail-safe PMD
-CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
-# Compile Marvell PMD driver
-CONFIG_RTE_LIBRTE_MVPP2_PMD=n
-# Compile Marvell MVNETA PMD driver
-CONFIG_RTE_LIBRTE_MVNETA_PMD=n
-# Compile support for VMBus library
-CONFIG_RTE_LIBRTE_VMBUS=n
-# Compile native PMD for Hyper-V/Azure
-CONFIG_RTE_LIBRTE_NETVSC_PMD=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
-# Compile virtual device driver for NetVSC on Hyper-V/Azure
-CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
-# Compile null PMD
-CONFIG_RTE_LIBRTE_PMD_NULL=n
-# Compile software PMD backed by PCAP files
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
-# Compile example software rings based PMD
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-# Compile SOFTNIC PMD
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
-# Compile architecture we compile for. TAP PMD
-# It is enabled by default for Linux only.
-CONFIG_RTE_LIBRTE_PMD_TAP=y
-# Do prefetch of packet data within PMD driver receive function
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-# Compile generic wireless base band device library
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_BBDEV=n
-CONFIG_RTE_BBDEV_MAX_DEVS=128
-CONFIG_RTE_BBDEV_OFFLOAD_COST=n
-# Compile PMD for NULL bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
-# Compile PMD for turbo software bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
-# Compile generic crypto device library
-CONFIG_RTE_LIBRTE_CRYPTODEV=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-# Compile PMD for ARMv8 Crypto device
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
-# Compile NXP CAAM JR crypto Driver
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
-# Compile NXP DPAA2 crypto sec driver for CAAM HW
-CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-# NXP DPAA caam - crypto driver
-CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-# Compile PMD for Cavium OCTEON TX crypto device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
-# Compile PMD for QuickAssist based devices - see docs for details
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
-# Max. number of QuickAssist devices, which can be detected and attached
-CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
-CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
-CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
-# Compile PMD for virtio crypto devices
-CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
-# Number of maximum virtio crypto devices
-CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-# Compile PMD for AESNI backed device
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-# Compile PMD for Software backed device
-CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-# Compile PMD for AESNI GCM device
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-# Compile PMD for SNOW 3G device
-CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
-CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
-# Compile PMD for KASUMI device
-CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-# Compile PMD for ZUC device
-CONFIG_RTE_LIBRTE_PMD_ZUC=n
-# Compile PMD for Crypto Scheduler device
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
-# Compile PMD for NULL Crypto device
-CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
-# Compile PMD for AMD CCP crypto device
-CONFIG_RTE_LIBRTE_PMD_CCP=n
-# Compile PMD for Marvell Crypto device
-CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
-# Compile generic security library
-CONFIG_RTE_LIBRTE_SECURITY=n
-# Compile generic compression device library
-CONFIG_RTE_LIBRTE_COMPRESSDEV=n
-CONFIG_RTE_COMPRESS_MAX_DEVS=64
-# Compile compressdev unit test
-CONFIG_RTE_COMPRESSDEV_TEST=n
-# Compile PMD for Octeontx ZIPVF compression device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
-# Compile PMD for ISA-L compression device
-CONFIG_RTE_LIBRTE_PMD_ISAL=n
-# Compile PMD for ZLIB compression device
-CONFIG_RTE_LIBRTE_PMD_ZLIB=n
-# Compile generic event device library
-CONFIG_RTE_LIBRTE_EVENTDEV=n
-CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
-CONFIG_RTE_EVENT_MAX_DEVS=16
-CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
-CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
-CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
-CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
-CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
-# Compile PMD for skeleton event device
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
-# Compile PMD for software event device
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
-# Compile PMD for distributed software event device
-CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
-# Compile PMD for octeontx sso event device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
-# Compile PMD for OPDL event device
-CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
-# Compile PMD for NXP DPAA event device
-CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
-# Compile PMD for NXP DPAA2 event device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
-# Compile raw device support
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_RAWDEV=n
-CONFIG_RTE_RAWDEV_MAX_DEVS=10
-CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
-# Compile PMD for NXP DPAA2 CMDIF raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
-# Compile PMD for NXP DPAA2 QDMA raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
-# Compile PMD for Intel FPGA raw device
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
-# Compile librte_ring
-CONFIG_RTE_LIBRTE_RING=y
-# Compile librte_mempool
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-# Compile Mempool drivers
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
-CONFIG_RTE_DRIVER_MEMPOOL_RING=y
-CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
-# Compile PMD for octeontx fpa mempool device
-CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
-# Compile librte_mbuf
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-# Compile librte_timer
-CONFIG_RTE_LIBRTE_TIMER=n
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-# Compile librte_cfgfile
-CONFIG_RTE_LIBRTE_CFGFILE=n
-# Compile librte_cmdline
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-# Compile librte_hash
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-# Compile librte_efd
-CONFIG_RTE_LIBRTE_EFD=n
-# Compile librte_member
-CONFIG_RTE_LIBRTE_MEMBER=y
-# Compile librte_jobstats
-CONFIG_RTE_LIBRTE_JOBSTATS=n
-# Compile architecture we compile for. device metrics library
-CONFIG_RTE_LIBRTE_METRICS=y
-# Compile architecture we compile for. bitrate statistics library
-CONFIG_RTE_LIBRTE_BITRATE=y
-# Compile architecture we compile for. latency statistics library
-CONFIG_RTE_LIBRTE_LATENCY_STATS=y
-# Compile librte_telemetry
-CONFIG_RTE_LIBRTE_TELEMETRY=n
-# Compile librte_lpm
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-# Compile librte_acl
-CONFIG_RTE_LIBRTE_ACL=n
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-# Compile librte_power
-CONFIG_RTE_LIBRTE_POWER=n
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-# Compile librte_net
-CONFIG_RTE_LIBRTE_NET=y
-# Compile librte_ip_frag
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-# Compile GRO library
-CONFIG_RTE_LIBRTE_GRO=y
-# Compile GSO library
-CONFIG_RTE_LIBRTE_GSO=y
-# Compile librte_meter
-CONFIG_RTE_LIBRTE_METER=y
-# Compile librte_classify
-CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
-# Compile librte_sched
-CONFIG_RTE_LIBRTE_SCHED=n
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-# Compile architecture we compile for. distributor library
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
-# Compile architecture we compile for. reorder library
-CONFIG_RTE_LIBRTE_REORDER=n
-# Compile librte_port
-CONFIG_RTE_LIBRTE_PORT=n
-CONFIG_RTE_PORT_STATS_COLLECT=n
-CONFIG_RTE_PORT_PCAP=n
-# Compile librte_table
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-# Compile librte_pipeline
-CONFIG_RTE_LIBRTE_PIPELINE=n
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-# Compile librte_kni
-CONFIG_RTE_LIBRTE_KNI=n
-CONFIG_RTE_LIBRTE_PMD_KNI=n
-CONFIG_RTE_KNI_KMOD=n
-CONFIG_RTE_KNI_KMOD_ETHTOOL=n
-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-# Compile architecture we compile for. pdump library
-CONFIG_RTE_LIBRTE_PDUMP=y
-# Compile vhost user library
-CONFIG_RTE_LIBRTE_VHOST=y
-CONFIG_RTE_LIBRTE_VHOST_NUMA=y
-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
-# Compile vhost PMD
-# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
-CONFIG_RTE_LIBRTE_PMD_VHOST=y
-# Compile IFC driver
-# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
-# should be enabled.
-CONFIG_RTE_LIBRTE_IFC_PMD=n
-# Compile librte_bpf
-CONFIG_RTE_LIBRTE_BPF=n
-# allow load BPF from ELF files (requires libelf)
-CONFIG_RTE_LIBRTE_BPF_ELF=n
-# Compile architecture we compile for. test application
-CONFIG_RTE_APP_TEST=y
-CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
-# Compile architecture we compile for. procinfo application
-CONFIG_RTE_PROC_INFO=y
-# Compile architecture we compile for. PMD test application
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
-# Compile architecture we compile for. bbdev test application
-CONFIG_RTE_TEST_BBDEV=n
-# Compile architecture we compile for. crypto performance application
-CONFIG_RTE_APP_CRYPTO_PERF=n
-# Compile architecture we compile for. eventdev application
-CONFIG_RTE_APP_EVENTDEV=n
-CONFIG_RTE_EXEC_ENV_LINUXAPP=y
-CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
-# Common libraries, before Bus/PMDs
-# NXP DPAA BUS and drivers
-# NXP FSLMC BUS and DPAA2 drivers
-# NXP ENETC PMD Driver
-CONFIG_RTE_ARCH_PPC_64=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_TOOLCHAIN_GCC=y
-# Note: Power doesn't have this support
-# Note: Initially, all of architecture we compile for. PMD drivers compilation are turned off on Power
-# Will turn on them only after architecture we compile for. successful testing on Power
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

SOURCES/set_config.sh

@@ -1,48 +0,0 @@
-#!/bin/bash
-# Copyright (C) 2017, Red Hat, Inc.
-#
-# set_config.sh will copy a configuration from $1 to $2, in the process
-# checking that the sha header for $1 matches the header in $2
-
-source configlib.sh
-
-if (( $# < 2 )); then
-    echo "$0: source dest [comment-marker]"
-    exit 1
-fi
-
-if [ ! -f "$1" ]; then
-    echo "Source file $1 must exist."
-    exit 1
-fi
-src_file=$1
-shift
-
-if [ ! -f "$1" ]; then
-    echo "Dest file $1 must exist."
-    exit 1
-fi
-dst_file=$1
-shift
-
-comment_sep=${1:-#}
-
-export LANG=en_US.utf8
-
-DEST_FILE_SHA=""
-SRC_FILE_SHA=""
-
-calc_sha DEST_FILE_SHA "$dst_file" "$comment_sep" || echo "Failed to calc sha"
-retr_sha SRC_FILE_SHA "$src_file" "$comment_sep" || echo "Failed to retrieve sha"
-
-if [ "$DEST_FILE_SHA" != "$SRC_FILE_SHA" ]; then
-    echo "ERROR: The requisite starting sha from $dst_file does not match the"
-    echo "       specified sha in $src_file."
-    echo "[ $DEST_FILE_SHA ] vs [ $SRC_FILE_SHA ]"
-    exit 1
-fi
-
-mv "$dst_file" "$dst_file".OLD
-cp "$src_file" "$dst_file"
-echo "copied 1 config file."
-exit 0

SOURCES/x86_64-native-linuxapp-gcc-config

@@ -1,525 +0,0 @@
-# -*- cfg-sha: 2ba93102021dc5d38494cf5090c3ecaca37db13153dd558b1511a56f2a3d9b10
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2014 Intel Corporation
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2016 Intel Corporation
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2017 Intel Corporation
-# RTE_EXEC_ENV values are the directories in mk/exec-env/
-CONFIG_RTE_EXEC_ENV="linuxapp"
-# RTE_ARCH values are architecture we compile for. directories in mk/arch/
-CONFIG_RTE_ARCH="x86_64"
-# machine can define specific variables or action for a specific board
-# RTE_MACHINE values are architecture we compile for. directories in mk/machine/
-CONFIG_RTE_MACHINE="default"
-# The compiler we use.
-# RTE_TOOLCHAIN values are architecture we compile for. directories in mk/toolchain/
-CONFIG_RTE_TOOLCHAIN="gcc"
-# Use intrinsics or assembly code for key routines
-CONFIG_RTE_FORCE_INTRINSICS=n
-# Machine forces strict alignment constraints.
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-# Compile to share library
-CONFIG_RTE_BUILD_SHARED_LIB=y
-# Use newest code breaking previous ABI
-CONFIG_RTE_NEXT_ABI=n
-# Major ABI to overwrite library specific LIBABIVER
-CONFIG_RTE_MAJOR_ABI=
-# Machine's cache line size
-CONFIG_RTE_CACHE_LINE_SIZE=64
-# Memory model
-CONFIG_RTE_USE_C11_MEM_MODEL=n
-# Compile Environment Abstraction Layer
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_HEAPS=32
-CONFIG_RTE_MAX_MEMSEG_LISTS=64
-# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
-# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
-CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
-# a "type" is a combination of page size and NUMA node. total number of memseg
-# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
-# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
-# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
-# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
-CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
-CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
-# global maximum usable amount of VA, in megabytes
-CONFIG_RTE_MAX_MEM_MB=524288
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_ENABLE_ASSERT=n
-CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_BACKTRACE=y
-CONFIG_RTE_LIBEAL_USE_HPET=n
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_EAL_IGB_UIO=n
-CONFIG_RTE_EAL_VFIO=y
-CONFIG_RTE_MAX_VFIO_GROUPS=64
-CONFIG_RTE_MAX_VFIO_CONTAINERS=64
-CONFIG_RTE_MALLOC_DEBUG=n
-CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=y
-CONFIG_RTE_USE_LIBBSD=n
-# Recognize/ignore architecture we compile for. AVX/AVX512 CPU flags for performance/power testing.
-# AVX512 is marked as experimental for now, will enable it after enough
-# field test and possible optimization.
-CONFIG_RTE_ENABLE_AVX=y
-CONFIG_RTE_ENABLE_AVX512=n
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH="/usr/lib64/dpdk-pmds"
-# Compile Environment Abstraction Layer to support Vmware TSC map
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-# Compile architecture we compile for. PCI library
-CONFIG_RTE_LIBRTE_PCI=y
-# Compile architecture we compile for. argument parser library
-CONFIG_RTE_LIBRTE_KVARGS=y
-# Compile generic ethernet library
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE=n
-# Turn off Tx preparation stage
-# Warning: rte_eth_tx_prepare() can be safely disabled only if using a
-# driver which do not implement any Tx preparation.
-CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
-# Common libraries, before Bus/PMDs
-CONFIG_RTE_LIBRTE_COMMON_DPAAX=n
-# Compile architecture we compile for. Intel FPGA bus
-CONFIG_RTE_LIBRTE_IFPGA_BUS=n
-# Compile PCI bus driver
-CONFIG_RTE_LIBRTE_PCI_BUS=y
-# Compile architecture we compile for. vdev bus
-CONFIG_RTE_LIBRTE_VDEV_BUS=y
-# Compile ARK PMD
-CONFIG_RTE_LIBRTE_ARK_PMD=n
-CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
-CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
-# Compile Aquantia Atlantic PMD driver
-CONFIG_RTE_LIBRTE_ATLANTIC_PMD=n
-# Compile AMD PMD
-CONFIG_RTE_LIBRTE_AXGBE_PMD=n
-CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
-# Compile burst-oriented Broadcom PMD driver
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-# Compile burst-oriented Broadcom BNXT PMD driver
-CONFIG_RTE_LIBRTE_BNXT_PMD=y
-# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
-CONFIG_RTE_LIBRTE_CXGBE_PMD=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
-# NXP DPAA Bus
-CONFIG_RTE_LIBRTE_DPAA_BUS=n
-CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA_PMD=n
-CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
-# Compile NXP DPAA2 FSL-MC Bus
-CONFIG_RTE_LIBRTE_FSLMC_BUS=n
-# Compile Support Libraries for NXP DPAA2
-CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
-# Compile burst-oriented NXP DPAA2 PMD driver
-CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-# Compile NXP ENETC PMD Driver
-CONFIG_RTE_LIBRTE_ENETC_PMD=n
-# Compile burst-oriented Amazon ENA PMD driver
-CONFIG_RTE_LIBRTE_ENA_PMD=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
-# Compile burst-oriented Cisco ENIC PMD driver
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-# Compile burst-oriented IGB & EM PMD drivers
-CONFIG_RTE_LIBRTE_EM_PMD=n
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-# Compile burst-oriented IXGBE PMD driver
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
-# Compile burst-oriented I40E PMD driver
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# Compile burst-oriented FM10K PMD
-CONFIG_RTE_LIBRTE_FM10K_PMD=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
-# Compile burst-oriented AVF PMD driver
-CONFIG_RTE_LIBRTE_AVF_PMD=n
-CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-CONFIG_RTE_LIBRTE_MLX4_PMD=y
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=y
-# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
-# (MLX5) PMD
-CONFIG_RTE_LIBRTE_MLX5_PMD=y
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=y
-# Compile burst-oriented Netronome NFP PMD driver
-CONFIG_RTE_LIBRTE_NFP_PMD=y
-CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
-# QLogic 10G/25G/40G/50G/100G PMD
-CONFIG_RTE_LIBRTE_QEDE_PMD=y
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
-#Provides abs path/name of architecture we compile for. firmware file.
-#Empty string denotes driver will use default firmware
-CONFIG_RTE_LIBRTE_QEDE_FW=""
-# Compile burst-oriented Solarflare libefx-based PMD
-CONFIG_RTE_LIBRTE_SFC_EFX_PMD=n
-CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
-# Compile software PMD backed by SZEDATA2 device
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-# Compile burst-oriented Cavium Thunderx NICVF PMD driver
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
-# Compile burst-oriented Cavium LiquidIO PMD driver
-CONFIG_RTE_LIBRTE_LIO_PMD=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
-# Compile burst-oriented Cavium OCTEONTX network PMD driver
-CONFIG_RTE_LIBRTE_OCTEONTX_PMD=n
-# Compile WRS accelerated virtual port (AVP) guest PMD driver
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
-# Compile burst-oriented VIRTIO PMD driver
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-# Compile virtio device emulation inside virtio PMD driver
-CONFIG_RTE_VIRTIO_USER=n
-# Compile burst-oriented VMXNET3 PMD driver
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
-# Compile link bonding PMD library
-CONFIG_RTE_LIBRTE_PMD_BOND=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-# Compile fail-safe PMD
-CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
-# Compile Marvell PMD driver
-CONFIG_RTE_LIBRTE_MVPP2_PMD=n
-# Compile Marvell MVNETA PMD driver
-CONFIG_RTE_LIBRTE_MVNETA_PMD=n
-# Compile support for VMBus library
-CONFIG_RTE_LIBRTE_VMBUS=y
-# Compile native PMD for Hyper-V/Azure
-CONFIG_RTE_LIBRTE_NETVSC_PMD=y
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
-# Compile virtual device driver for NetVSC on Hyper-V/Azure
-CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=y
-# Compile null PMD
-CONFIG_RTE_LIBRTE_PMD_NULL=n
-# Compile software PMD backed by PCAP files
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
-# Compile example software rings based PMD
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-# Compile SOFTNIC PMD
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
-# Compile architecture we compile for. TAP PMD
-# It is enabled by default for Linux only.
-CONFIG_RTE_LIBRTE_PMD_TAP=y
-# Do prefetch of packet data within PMD driver receive function
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-# Compile generic wireless base band device library
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_BBDEV=n
-CONFIG_RTE_BBDEV_MAX_DEVS=128
-CONFIG_RTE_BBDEV_OFFLOAD_COST=n
-# Compile PMD for NULL bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
-# Compile PMD for turbo software bbdev device
-CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
-# Compile generic crypto device library
-CONFIG_RTE_LIBRTE_CRYPTODEV=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-# Compile PMD for ARMv8 Crypto device
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
-# Compile NXP CAAM JR crypto Driver
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR=n
-CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE=n
-# Compile NXP DPAA2 crypto sec driver for CAAM HW
-CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-# NXP DPAA caam - crypto driver
-CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
-# Compile PMD for Cavium OCTEON TX crypto device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_CRYPTO=y
-# Compile PMD for QuickAssist based devices - see docs for details
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
-# Max. number of QuickAssist devices, which can be detected and attached
-CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
-CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
-CONFIG_RTE_PMD_QAT_COMP_IM_BUFFER_SIZE=65536
-# Compile PMD for virtio crypto devices
-CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=n
-# Number of maximum virtio crypto devices
-CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
-# Compile PMD for AESNI backed device
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-# Compile PMD for Software backed device
-CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-# Compile PMD for AESNI GCM device
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-# Compile PMD for SNOW 3G device
-CONFIG_RTE_LIBRTE_PMD_SNOW3G=n
-CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
-# Compile PMD for KASUMI device
-CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-# Compile PMD for ZUC device
-CONFIG_RTE_LIBRTE_PMD_ZUC=n
-# Compile PMD for Crypto Scheduler device
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=n
-# Compile PMD for NULL Crypto device
-CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n
-# Compile PMD for AMD CCP crypto device
-CONFIG_RTE_LIBRTE_PMD_CCP=n
-# Compile PMD for Marvell Crypto device
-CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
-# Compile generic security library
-CONFIG_RTE_LIBRTE_SECURITY=n
-# Compile generic compression device library
-CONFIG_RTE_LIBRTE_COMPRESSDEV=n
-CONFIG_RTE_COMPRESS_MAX_DEVS=64
-# Compile compressdev unit test
-CONFIG_RTE_COMPRESSDEV_TEST=n
-# Compile PMD for Octeontx ZIPVF compression device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=n
-# Compile PMD for ISA-L compression device
-CONFIG_RTE_LIBRTE_PMD_ISAL=n
-# Compile PMD for ZLIB compression device
-CONFIG_RTE_LIBRTE_PMD_ZLIB=n
-# Compile generic event device library
-CONFIG_RTE_LIBRTE_EVENTDEV=n
-CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
-CONFIG_RTE_EVENT_MAX_DEVS=16
-CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
-CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
-CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
-CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
-CONFIG_RTE_EVENT_ETH_TX_ADAPTER_MAX_INSTANCE=32
-# Compile PMD for skeleton event device
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV=n
-CONFIG_RTE_LIBRTE_PMD_SKELETON_EVENTDEV_DEBUG=n
-# Compile PMD for software event device
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=n
-# Compile PMD for distributed software event device
-CONFIG_RTE_LIBRTE_PMD_DSW_EVENTDEV=n
-# Compile PMD for octeontx sso event device
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=n
-# Compile PMD for OPDL event device
-CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=n
-# Compile PMD for NXP DPAA event device
-CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
-# Compile PMD for NXP DPAA2 event device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
-# Compile raw device support
-# EXPERIMENTAL: API may change without prior notice
-CONFIG_RTE_LIBRTE_RAWDEV=n
-CONFIG_RTE_RAWDEV_MAX_DEVS=10
-CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=n
-# Compile PMD for NXP DPAA2 CMDIF raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
-# Compile PMD for NXP DPAA2 QDMA raw device
-CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
-# Compile PMD for Intel FPGA raw device
-CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
-# Compile librte_ring
-CONFIG_RTE_LIBRTE_RING=y
-# Compile librte_mempool
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-# Compile Mempool drivers
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
-CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
-CONFIG_RTE_DRIVER_MEMPOOL_RING=y
-CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
-# Compile PMD for octeontx fpa mempool device
-CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=n
-# Compile librte_mbuf
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc"
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-# Compile librte_timer
-CONFIG_RTE_LIBRTE_TIMER=n
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-# Compile librte_cfgfile
-CONFIG_RTE_LIBRTE_CFGFILE=n
-# Compile librte_cmdline
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-# Compile librte_hash
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-# Compile librte_efd
-CONFIG_RTE_LIBRTE_EFD=n
-# Compile librte_member
-CONFIG_RTE_LIBRTE_MEMBER=y
-# Compile librte_jobstats
-CONFIG_RTE_LIBRTE_JOBSTATS=n
-# Compile architecture we compile for. device metrics library
-CONFIG_RTE_LIBRTE_METRICS=y
-# Compile architecture we compile for. bitrate statistics library
-CONFIG_RTE_LIBRTE_BITRATE=y
-# Compile architecture we compile for. latency statistics library
-CONFIG_RTE_LIBRTE_LATENCY_STATS=y
-# Compile librte_telemetry
-CONFIG_RTE_LIBRTE_TELEMETRY=n
-# Compile librte_lpm
-CONFIG_RTE_LIBRTE_LPM=n
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-# Compile librte_acl
-CONFIG_RTE_LIBRTE_ACL=n
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-# Compile librte_power
-CONFIG_RTE_LIBRTE_POWER=n
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-# Compile librte_net
-CONFIG_RTE_LIBRTE_NET=y
-# Compile librte_ip_frag
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-# Compile GRO library
-CONFIG_RTE_LIBRTE_GRO=y
-# Compile GSO library
-CONFIG_RTE_LIBRTE_GSO=y
-# Compile librte_meter
-CONFIG_RTE_LIBRTE_METER=y
-# Compile librte_classify
-CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=n
-# Compile librte_sched
-CONFIG_RTE_LIBRTE_SCHED=n
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-# Compile architecture we compile for. distributor library
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=n
-# Compile architecture we compile for. reorder library
-CONFIG_RTE_LIBRTE_REORDER=n
-# Compile librte_port
-CONFIG_RTE_LIBRTE_PORT=n
-CONFIG_RTE_PORT_STATS_COLLECT=n
-CONFIG_RTE_PORT_PCAP=n
-# Compile librte_table
-CONFIG_RTE_LIBRTE_TABLE=n
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-# Compile librte_pipeline
-CONFIG_RTE_LIBRTE_PIPELINE=n
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-# Compile librte_kni
-CONFIG_RTE_LIBRTE_KNI=n
-CONFIG_RTE_LIBRTE_PMD_KNI=n
-CONFIG_RTE_KNI_KMOD=n
-CONFIG_RTE_KNI_KMOD_ETHTOOL=n
-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-# Compile architecture we compile for. pdump library
-CONFIG_RTE_LIBRTE_PDUMP=y
-# Compile vhost user library
-CONFIG_RTE_LIBRTE_VHOST=y
-CONFIG_RTE_LIBRTE_VHOST_NUMA=y
-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
-# Compile vhost PMD
-# To compile, CONFIG_RTE_LIBRTE_VHOST should be enabled.
-CONFIG_RTE_LIBRTE_PMD_VHOST=y
-# Compile IFC driver
-# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
-# should be enabled.
-CONFIG_RTE_LIBRTE_IFC_PMD=n
-# Compile librte_bpf
-CONFIG_RTE_LIBRTE_BPF=n
-# allow load BPF from ELF files (requires libelf)
-CONFIG_RTE_LIBRTE_BPF_ELF=n
-# Compile architecture we compile for. test application
-CONFIG_RTE_APP_TEST=y
-CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
-# Compile architecture we compile for. procinfo application
-CONFIG_RTE_PROC_INFO=y
-# Compile architecture we compile for. PMD test application
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
-# Compile architecture we compile for. bbdev test application
-CONFIG_RTE_TEST_BBDEV=n
-# Compile architecture we compile for. crypto performance application
-CONFIG_RTE_APP_CRYPTO_PERF=n
-# Compile architecture we compile for. eventdev application
-CONFIG_RTE_APP_EVENTDEV=n
-CONFIG_RTE_EXEC_ENV_LINUXAPP=y
-CONFIG_RTE_LIBRTE_VHOST_POSTCOPY=n
-# Common libraries, before Bus/PMDs
-# NXP DPAA BUS and drivers
-# NXP FSLMC BUS and DPAA2 drivers
-# NXP ENETC PMD Driver
-CONFIG_RTE_ARCH_X86_64=y
-CONFIG_RTE_ARCH_X86=y
-CONFIG_RTE_ARCH_64=y
-CONFIG_RTE_TOOLCHAIN_GCC=y
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

SPECS/dpdk.spec

@@ -4,43 +4,33 @@
 %bcond_without tools
 
 # Dont edit Version: and Release: directly, only these:
-#% define commit0 0da7f445df445630c794897347ee360d6fe6348b
+#% define commit0 7001c8fdb27357c67147c0a13cb3826e48c0f2bf
-#% define date 20181127
+#% define date 20191128
 #% define shortcommit0 %(c=%{commit0}; echo ${c:0:7})
 
-%define ver 18.11
+%define ver 23.11
-%define rel 3
+%define rel 1
 
-%define srcname dpdk
+%define srcname dpdk%(awk -F. '{ if (NF > 2) print "-stable" }' <<<%{version})
+
+%define pyelftoolsver 0.27
 
 Name: dpdk
 Version: %{ver}
 Release: %{rel}%{?commit0:.%{date}git%{shortcommit0}}%{?dist}
+%if 0%{?fedora} || 0%{?rhel} > 8
+Epoch: 2
+%endif
 URL: http://dpdk.org
 %if 0%{?commit0:1}
-Source: http://dpdk.org/browse/dpdk/snapshot/dpdk-%{commit0}.tar.xz
+Source: https://dpdk.org/browse/dpdk/snapshot/dpdk-%{commit0}.tar.xz
 %else
-Source: http://fast.dpdk.org/rel/dpdk-%{ver}.tar.xz
+Source: https://fast.dpdk.org/rel/dpdk-%{ver}.tar.xz
 %endif
 
 # Only needed for creating snapshot tarballs, not used in build itself
 Source100: dpdk-snapshot.sh
 
-Source500: configlib.sh
-Source501: gen_config_group.sh
-Source502: set_config.sh
-
-# Important: source503 is used as the actual copy file
-# @TODO: this causes a warning - fix it?
-Source504: arm64-armv8a-linuxapp-gcc-config
-Source505: ppc_64-power8-linuxapp-gcc-config
-Source506: x86_64-native-linuxapp-gcc-config
-
-# Patches only in dpdk package
-Patch0: 0001-bus-vmbus-fix-race-in-subchannel-creation.patch
-Patch1: 0002-net-netvsc-enable-SR-IOV.patch
-Patch2: 0003-net-netvsc-disable-multi-queue-on-older-servers.patch
-
 Summary: Set of libraries and drivers for fast packet processing
 
 #
@@ -56,50 +46,26 @@ License: BSD and LGPLv2 and GPLv2
 # needs extensive work to port it to other architectures.
 ExclusiveArch: x86_64 aarch64 ppc64le
 
-# machine_arch maps between rpm and dpdk arch name, often same as _target_cpu
-# machine_tmpl is the config template machine name, often "native"
-# machine is the actual machine name used in the dpdk make system
-%ifarch x86_64
-%define machine_arch x86_64
-%define machine_tmpl native
-%define machine default
-%endif
-%ifarch aarch64
-%define machine_arch arm64
-%define machine_tmpl armv8a
-%define machine armv8a
-%endif
-%ifarch ppc64le
-%define machine_arch ppc_64
-%define machine_tmpl power8
-%define machine power8
-%endif
-
-%define target %{machine_arch}-%{machine_tmpl}-linuxapp-gcc
-
 %define sdkdir  %{_datadir}/%{name}
 %define docdir  %{_docdir}/%{name}
 %define incdir  %{_includedir}/%{name}
-%define pmddir %{_libdir}/%{name}-pmds
+%define pmddir  %{_libdir}/%{name}-pmds
 
-%if 0%{?rhel} > 7 || 0%{?fedora}
+%if 0%{?rhel} && 0%{?rhel} < 9
-%define _py python3
+# Fix conflicts with README and MAINTAINERS (included in dpdk-doc < 18.11-2),
-%define _py_exec %{?__python3}
+# this affects only RHEL8.
-%else
-%define _py python
-%define _py_exec %{?__python2}
-%endif
-
-%if 0%{?rhel} > 7
-# Fix conflicts with README and MAINTAINERS (included in dpdk-doc < 18.11-2)
 Conflicts: dpdk-doc < 18.11-2
 %endif
 
-BuildRequires: gcc, kernel-headers, zlib-devel, numactl-devel
+BuildRequires: meson
-BuildRequires: doxygen, %{_py}-devel, %{_py}-sphinx
+Source1: https://github.com/eliben/pyelftools/archive/refs/tags/v%{pyelftoolsver}.tar.gz#/pyelftools-%{pyelftoolsver}.tar.gz
+%if 0%{?rhel} > 8 || 0%{?fedora}
+BuildRequires: python3-pyelftools
+%endif
+BuildRequires: gcc, zlib-devel, numactl-devel, libarchive-devel
+BuildRequires: doxygen, python3-sphinx
 %ifarch x86_64
-BuildRequires: rdma-core-devel >= 15 libmnl-devel
+BuildRequires: rdma-core-devel >= 15
-%global __requires_exclude_from ^%{_libdir}/librte_pmd_mlx[45]_glue\.so.*$
 %endif
 
 %description
@@ -108,7 +74,10 @@ fast packet processing in the user space.
 
 %package devel
 Summary: Data Plane Development Kit development files
-Requires: %{name}%{?_isa} = %{version}-%{release}
+Requires: %{name}%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
+%ifarch x86_64
+Requires: rdma-core-devel
+%endif
 
 %description devel
 This package contains the headers and other files needed for developing
@@ -124,8 +93,8 @@ API programming documentation for the Data Plane Development Kit.
 %if %{with tools}
 %package tools
 Summary: Tools for setting up Data Plane Development Kit environment
-Requires: %{name} = %{version}-%{release}
+Requires: %{name} = %{?epoch:%{epoch}:}%{version}-%{release}
-Requires: kmod pciutils findutils iproute %{_py_exec}
+Requires: kmod pciutils findutils iproute python3
 
 %description tools
 %{summary}
@@ -142,117 +111,146 @@ as L2 and L3 forwarding.
 %endif
 
 %prep
-%autosetup -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}} -p1
+%if 0%{?rhel} && 0%{?rhel} < 9
+%setup -q -a 1 -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}}
+%else
+%setup -q -n %{srcname}-%{?commit0:%{commit0}}%{!?commit0:%{ver}}
+%endif
+%autopatch -p1
 
 %build
-# In case dpdk-devel is installed
+%if 0%{?rhel} && 0%{?rhel} < 9
-unset RTE_SDK RTE_INCLUDE RTE_TARGET
+export PYTHONPATH=$(pwd)/pyelftools-%{pyelftoolsver}
-
-# Avoid appending second -Wall to everything, it breaks upstream warning
-# disablers in makefiles. Strip expclit -march= from optflags since they
-# will only guarantee build failures, DPDK is picky with that.
-export EXTRA_CFLAGS="$(echo %{optflags} | sed -e 's:-Wall::g' -e 's:-march=[[:alnum:]]* ::g') -Wformat -fPIC"
-
-# DPDK defaults to using builder-specific compiler flags.  However,
-# the config has been changed by specifying CONFIG_RTE_MACHINE=default
-# in order to build for a more generic host.  NOTE: It is possible that
-# the compiler flags used still won't work for all Fedora-supported
-# machines, but runtime checks in DPDK will catch those situations.
-
-make V=1 O=%{target} T=%{target} %{?_smp_mflags} config
-
-cp -f %{SOURCE500} %{SOURCE502} "%{_sourcedir}/%{target}-config" .
-%{SOURCE502} %{target}-config "%{target}/.config"
-
-make V=1 O=%{target} %{?_smp_mflags} 
-
-# Creating PDF's has excessive build-requirements, html docs suffice fine
-make V=1 O=%{target} %{?_smp_mflags} doc-api-html doc-guides-html
-
-%if %{with examples}
-make V=1 O=%{target}/examples T=%{target} %{?_smp_mflags} examples
 %endif
 
+ENABLED_APPS=(
+    test-pmd
+    test-bbdev
+)
+
+for app in "${ENABLED_APPS[@]}"; do
+    enable_apps="${enable_apps:+$enable_apps,}"$app
+done
+
+ENABLED_DRIVERS=(
+    bus/pci
+    bus/vdev
+    mempool/ring
+    net/failsafe
+    net/i40e
+    net/ring
+    net/vhost
+    net/virtio
+    net/tap
+)
+
+%ifarch x86_64
+ENABLED_DRIVERS+=(
+    baseband/acc
+    bus/auxiliary
+    bus/vmbus
+    common/iavf
+    common/mlx5
+    common/nfp
+    net/bnxt
+    net/enic
+    net/iavf
+    net/ice
+    net/mlx5
+    net/netvsc
+    net/nfp
+    net/qede
+    net/vdev_netvsc
+)
+%endif
+
+%ifarch aarch64 x86_64
+ENABLED_DRIVERS+=(
+    net/e1000
+    net/ixgbe
+)
+%endif
+
+for driver in "${ENABLED_DRIVERS[@]}"; do
+    enable_drivers="${enable_drivers:+$enable_drivers,}"$driver
+done
+
+# If doing any updates, this must be aligned with:
+# https://access.redhat.com/articles/3538141
+ENABLED_LIBS=(
+    bbdev
+    bitratestats
+    bpf
+    cmdline
+    cryptodev
+    dmadev
+    gro
+    gso
+    hash
+    ip_frag
+    latencystats
+    member
+    meter
+    metrics
+    pcapng
+    pdump
+    security
+    stack
+    vhost
+)
+
+for lib in "${ENABLED_LIBS[@]}"; do
+    enable_libs="${enable_libs:+$enable_libs,}"$lib
+done
+
+ln -s /usr/bin/true mandb
+export PATH=$(pwd):$PATH
+%meson --includedir=include/dpdk \
+       --default-library=shared \
+       -Ddeveloper_mode=disabled \
+       -Denable_libs="$enable_libs" \
+       -Ddrivers_install_subdir=dpdk-pmds \
+       -Denable_apps="$enable_apps" \
+       -Denable_docs=true \
+       -Denable_drivers="$enable_drivers" \
+       -Dplatform=generic \
+       -Dmax_ethports=32 \
+       -Dmax_numa_nodes=8 \
+       -Dtests=false
+
+# Check drivers and libraries
+for driver in "${ENABLED_DRIVERS[@]}"; do
+	config_token="RTE_$(echo "$driver" | tr [a-z/] [A-Z_])"
+	! grep -Fqw "$config_token" */rte_build_config.h || continue
+	echo "!!! Could not find $driver in rte_build_config.h, please check dependencies. !!!"
+	false
+done
+for lib in "${ENABLED_LIBS[@]}"; do
+	config_token="RTE_LIB_$(echo "$lib" | tr [a-z/] [A-Z_])"
+	! grep -Fqw "$config_token" */rte_build_config.h || continue
+	echo "!!! Could not find $lib in rte_build_config.h, please check dependencies. !!!"
+	false
+done
+%meson_build
+
 %install
-# In case dpdk-devel is installed
+%meson_install
-unset RTE_SDK RTE_INCLUDE RTE_TARGET
 
-%make_install O=%{target} prefix=%{_usr} libdir=%{_libdir}
+rm -f %{buildroot}%{_libdir}/*.a
-
+# Taken from debian/rules
-# Replace /usr/bin/env python with the correct python binary
+rm -f %{buildroot}%{docdir}/html/.buildinfo
-find %{buildroot}%{sdkdir}/ -name "*.py" -exec \
+rm -f %{buildroot}%{docdir}/html/objects.inv
-  sed -i -e 's|#!\s*/usr/bin/env python|#!%{_py_exec}|' {} +
+rm -rf %{buildroot}%{docdir}/html/.doctrees
-
+find %{buildroot}%{_datadir}/man/ -type f -a ! -iname "*rte_*" -exec rm {} \;
-# Create a driver directory with symlinks to all pmds
-mkdir -p %{buildroot}/%{pmddir}
-for f in %{buildroot}/%{_libdir}/*_pmd_*.so.*; do
-    bn=$(basename ${f})
-%ifarch x86_64
-    case $bn in
-    librte_pmd_mlx[45]_glue.so.*)
-        mkdir -p %{buildroot}/%{pmddir}-glue
-        ln -s ../${bn} %{buildroot}%{pmddir}-glue/${bn}
-        continue
-        ;;
-    esac
-%endif
-    ln -s ../${bn} %{buildroot}%{pmddir}/${bn}
-done
-
-%if ! %{with tools}
-rm -rf %{buildroot}%{sdkdir}/usertools
-rm -rf %{buildroot}%{_sbindir}/dpdk-devbind
-%endif
-rm -f %{buildroot}%{sdkdir}/usertools/dpdk-setup.sh
-rm -f %{buildroot}%{sdkdir}/usertools/meson.build
-rm -f %{buildroot}%{_bindir}/dpdk-pmdinfo
-rm -f %{buildroot}%{_bindir}/dpdk-test-crypto-perf
-rm -f %{buildroot}%{_bindir}/dpdk-test-eventdev
-
-%if %{with examples}
-find %{target}/examples/ -name "*.map" | xargs rm -f
-for f in %{target}/examples/*/%{target}/app/*; do
-    bn=`basename ${f}`
-    cp -p ${f} %{buildroot}%{_bindir}/dpdk-${bn}
-done
-%else
-rm -rf %{buildroot}%{sdkdir}/examples
-%endif
-
-# Setup RTE_SDK environment as expected by apps etc
-mkdir -p %{buildroot}/%{_sysconfdir}/profile.d
-cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.sh
-if [ -z "\${RTE_SDK}" ]; then
-    export RTE_SDK="%{sdkdir}"
-    export RTE_TARGET="%{target}"
-    export RTE_INCLUDE="%{incdir}"
-fi
-EOF
-
-cat << EOF > %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk-%{_arch}.csh
-if ( ! \$RTE_SDK ) then
-    setenv RTE_SDK "%{sdkdir}"
-    setenv RTE_TARGET "%{target}"
-    setenv RTE_INCLUDE "%{incdir}"
-endif
-EOF
-
-# Fixup target machine mismatch
-sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profile.d/dpdk-sdk*
 
 %files
 # BSD
 %doc README MAINTAINERS
-%{_bindir}/testpmd
+%{_bindir}/dpdk-testpmd
-%{_bindir}/dpdk-procinfo
+%{_bindir}/dpdk-test-bbdev
-%{_bindir}/dpdk-pdump
 %dir %{pmddir}
 %{_libdir}/*.so.*
 %{pmddir}/*.so.*
-%ifarch x86_64
-%dir %{pmddir}-glue
-%{pmddir}-glue/*.so.*
-%endif
 
 %files doc
 #BSD
@@ -265,28 +263,103 @@ sed -i -e 's:-%{machine_tmpl}-:-%{machine}-:g' %{buildroot}/%{_sysconfdir}/profi
 %{incdir}/
 %{sdkdir}/
 %if %{with tools}
-%exclude %{sdkdir}/usertools/
+%exclude %{_bindir}/dpdk-*.py
 %endif
 %if %{with examples}
 %exclude %{sdkdir}/examples/
 %endif
-%{_sysconfdir}/profile.d/dpdk-sdk-*.*
 %{_libdir}/*.so
+%{pmddir}/*.so
+%{_libdir}/pkgconfig/libdpdk.pc
+%{_libdir}/pkgconfig/libdpdk-libs.pc
+%{_datadir}/man
 %if %{with examples}
 %files examples
-%exclude %{_bindir}/dpdk-procinfo
-%exclude %{_bindir}/dpdk-pdump
 %{_bindir}/dpdk-*
 %doc %{sdkdir}/examples/
 %endif
 
 %if %{with tools}
 %files tools
-%{sdkdir}/usertools/
+%{_bindir}/dpdk-*.py
-%{_sbindir}/dpdk-devbind
 %endif
 
 %changelog
+* Fri Dec 15 2023 David Marchand <david.marchand@redhat.com> - 23.11-1
+- Rebase to 23.11 (RHEL-19584)
+
+* Fri Dec 23 2022 Timothy Redaelli <tredaelli@redhat.com> - 21.11-3
+- Version bump just to be sure it's updated from dpdk-21.11-2.el8_7
+
+* Wed Oct 26 2022 Timothy Redaelli <tredaelli@redhat.com> - 21.11-2
+- Backport fixes for CVE-2022-2132 (#2107171)
+
+* Tue Nov 23 2021 David Marchand <david.marchand@redhat.com> - 21.11-1
+- Rebase to 21.11 (#2029497)
+
+* Tue Feb 16 2021 Timothy Redaelli <tredaelli@redhat.com> - 20.11-3
+- Fix gating since on DPDK 20.11 testpmd is called dpdk-testpmd
+
+* Wed Feb 10 2021 Timothy Redaelli <tredaelli@redhat.com> - 20.11-2
+- Enable ice PMD for x86_64 (#1927179)
+
+* Tue Dec 01 2020 Timothy Redaelli <tredaelli@redhat.com> - 20.11-1
+- Rebase DPDK to 20.11 using meson build system (#1908446)
+
+* Thu Aug 13 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11.3-1
+- Rebase DPDK to 19.11.3 (#1868708)
+
+* Wed May 20 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11.2-1
+- Rebase DPDK to 19.11.2 (#1836830, #1837024, #1837030, #1837022)
+
+* Fri Apr 17 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11.1-1
+- Rebase DPDK to 19.11.1 (#1824905)
+- Remove dpdk-pmdinfo.py (#1801361)
+- Add Requires: rdma-core-devel libmnl-devel on x86_64 for dpdk-devel (#1813252)
+
+* Thu Feb 20 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11-4
+- Remove MLX{4,5} glue libraries since RHEL 8 ships the correct libibverbs
+  library. (#1805140)
+
+* Mon Feb 17 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11-3
+- Remove /usr/share/dpdk/mk/exec-env/{bsd,linux}app symlinks (#1773889)
+
+* Thu Feb 13 2020 Timothy Redaelli <tredaelli@redhat.com> - 19.11-2
+- Add pretrans to handle /usr/share/dpdk/mk/exec-env/{bsd,linux}app (#1773889)
+
+* Thu Nov 28 2019 David Marchand <david.marchand@redhat.com> - 19.11-1
+- Rebase to 19.11 (#1773889)
+- Remove dpdk-pdump (#1779229)
+
+* Mon Nov 04 2019 Timothy Redaelli <tredaelli@redhat.com> - 18.11.2-4
+- Pass the correct LDFLAGS to host apps (dpdk-pmdinfogen) too (#1755538)
+
+* Mon Sep 16 2019 Jens Freimann <jfreimann@redhat.com> - 18.11.2-3
+- Add fix for wrong pointer calculation to fix Covscan issue
+- https://cov01.lab.eng.brq.redhat.com/covscanhub/task/135452/log/added.html
+
+* Wed Aug 14 2019 Jens Freimann <jfreimann@redhat.com> - 18.11.2-2
+- Backport "net/virtio: allocate vrings on device NUMA node" (#1700373)
+
+* Thu Jun 27 2019 Timothy Redaelli <tredaelli@redhat.com> - 18.11.2-1
+- Updated to DPDK 18.11.2 (#1713704)
+
+* Fri May 24 2019 Maxime Coquelin <maxime.coquelin@redhat.com> - 18.11.8
+- Backport "net/virtio: allocate vrings on device NUMA node" (#1525039)
+
+* Thu May 23 2019 Timothy Redaelli <tredaelli@redhat.com> - 18.11-7
+- Really use the security cflags (copied from Fedora RPM) (#1703985)
+
+* Fri May 17 2019 Maxime Coquelin <maxime.coquelin@redhat.com> - 18.11-6
+- Fix basic CI gating test (#1682308)
+- Add manual gating test (#1682308)
+
+* Tue Mar 26 2019 Maxime Coquelin <maxime.coquelin@redhat.com> - 18.11-5
+- Add basic CI gating test (#1682308)
+
+* Mon Feb 18 2019 Jens Freimann <jfreiman@redhat.com> - 18.11-4
+- Set correct offload flags for virtio and allow jumbo frames (#1676646)
+
 * Mon Feb 18 2019 Maxime Coquelin <maxime.coquelin@redhat.com> - 18.11.3
 - Backport NETVSC pmd fixes (#1676534)