- Update Source to the latest upstream commit
- Add 0001-libmultipath-add-comment-about-resuming.patch
* posted upstream
- Add 0002-multipath-attempt-at-common-multipath.rules.patch
* under discussion upstream
- Add 0003-RH-fixup-udev-rules-for-redhat.patch
* Redhat uses different udev rules that some other distros, so multipath
has run at a different time. Not all upstream distros link /sbin and
/usr/sbin either.
- Add 0004-RH-Remove-the-property-blacklist-exception-builtin.patch
* Allow multipath to be used on devices without multiple paths. NAK'ed
upstream, but requested by Red Hat
- Add 0005-RH-don-t-start-without-a-config-file.patch
* Don't start multipath unless a config file exists. NAK'ed upstream,
but requested by Red Hat
- Add 0006-RH-use-rpm-optflags-if-present.patch
* Make the build system fedora friendly
- Add 0007-RH-add-mpathconf.patch
* Add tool to help configure multipath with Red Hat defaults.
- Add 0008-RH-add-wwids-from-kernel-cmdline-mpath.wwids-with-A.patch
* Make multipath able to claim devices based on the kernel command line
NAK'ed upstream but requested by Red Hat
- Add 0009-RH-trigger-change-uevent-on-new-device-creation.patch
* under discussion upstream
Remove Epoch from device-mapper requires
* The RHEL releases of device-mapper set the Epoch, and this was
accidentally retained in the fedora spec file.
Modify 0136-RHBZ-1304687-wait-for-map-add.patch
* switch to missing_uev_wait_timeout to stop waiting for uev
Refresh 0137-RHBZ-1280524-clear-chkr-msg.patch
Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
Refresh 0154-UPBZ-1291406-disable-reinstate.patch
Refresh 0156-UPBZ-1313324-dont-fail-discovery.patch
Refresh 0161-RHBZ-1311659-no-kpartx.patch
Refresh 0167-RHBZ-1335176-fix-show-cmds.patch
Add 0173-RH-update-man-page.patch
Add 0174-RHBZ-1362396-modprobe.patch
* make starting the multipathd service modprobe dm-multipath in the
sysvinit scripts
Add 0175-RHBZ-1357382-ordering.patch
* force multipathd.service to start after systemd-udev-trigger.service
Add 0176-RHBZ-1363830-fix-rename.patch
* initialized a variable to make dm_rename not fail randomly
Add 0177-libmultipath-correctly-initialize-pp-sg_id.patch
* This and all the following patches add the rbd patch checker
Add 0178-libmultipath-add-rbd-discovery.patch
Add 0179-multipath-tools-add-checker-callout-to-repair-path.patch
Add 0180-multipath-tools-Add-rbd-checker.patch
Add 0181-multipath-tools-Add-rbd-to-the-hwtable.patch
Add 0182-multipath-tools-check-for-initialized-checker-before.patch
Add 0183-multipathd-Don-t-call-repair-on-blacklisted-path.patch
Add 0184-rbd-fix-sync-repair-support.patch
Add 0185-rbd-check-for-nonshared-clients.patch
Add 0186-rbd-check-for-exclusive-lock-enabled.patch
Add 0187-rbd-fixup-log-messages.patch
Add 0188-RHBZ-1368501-dont-exit.patch
* make multipathd not exit if it encounters recoverable errors on startup
Add 0189-RHBZ-1368211-remove-retries.patch
* add "remove_retries" multipath.conf parameter to make multiple attempts
to remove a multipath device if it is busy.
Add 0190-RHBZ-1380602-rbd-lock-on-read.patch
* pass lock_on_read when remapping image
Add 0191-RHBZ-1169168-disable-changed-paths.patch
* add "disabled_changed_wwids" multipath.conf parameter to disable
paths whose wwid changes
Add 0192-RHBZ-1362409-infinibox-config.patch
Add 0194-RHBZ-1351964-kpartx-recurse.patch
* fix recursion on corrupt dos partitions
Add 0195-RHBZ-1359510-no-daemon-msg.patch
* print a messages when multipathd isn't running
Add 0196-RHBZ-1239173-dont-set-flag.patch
* don't set reload flag on reloads when you gain your first
valid path
Add 0197-RHBZ-1394059-max-sectors-kb.patch
* add "max_sectors_kb" multipath.conf parameter to set max_sectors_kb
on a multipath device and all its path devices
Add 0198-RHBZ-1372032-detect-path-checker.patch
* add "detect_checker" multipath.conf parameter to detect ALUA arrays
and set the path checker to TUR
Add 0199-RHBZ-1279355-3pardata-config.patch
Add 0200-RHBZ-1402092-orphan-status.patch
* clear status on orphan paths
Add 0201-RHBZ-1403552-silence-warning.patch
Add 0202-RHBZ-1362120-skip-prio.patch
* don't run prio on failed paths
Add 0203-RHBZ-1363718-add-msgs.patch
Add 0204-RHBZ-1406226-nimble-config.patch
Add 0205-RHBZ-1416569-reset-stats.patch
* add "reset maps stats" and "reset map <map> stats" multipathd
interactive commands to reset the stats tracked by multipathd
Add 0206-RHBZ-1239173-pt2-no-paths.patch
* make multipath correctly disable scanning and rules running when
it gets a uevent and there are not valid paths.
Add 0207-UP-add-libmpathcmd.patch
* New shared library, libmpathcmd, that sends and receives messages from
multipathd. device-mapper-multipath now uses this library internally.
Add 0208-UPBZ-1430097-multipathd-IPC-changes.patch
* validation that modifying commands are coming from root.
Add 0209-UPBZ-1430097-multipath-C-API.patch
* New shared library. libdmmp, that presents the information from multipathd
in a structured manner to make it easier for callers to use
Add 0210-RH-fix-uninstall.patch
* Minor compilation fixes
Add 0211-RH-strlen-fix.patch
* checks that variables are not NULL before passing them to strlen
Add 0212-RHBZ-1431562-for-read-only.patch
Make 3 new subpackages
* device-mapper-multipath-devel, libdmmp, and libdmmp-devel. libmpathcmd
and libmpathprio are in device-mapper-multipath-libs and
device-mapper-multipath-devel. libdmmp is in its own subpackages
Move libmpathprio devel files to device-mapper-multipath-devel
Added BuildRequires on librados2-devel
Modify 0135-RHBZ-1299600-path-dev-uevents.patch
* trigger uevents when adding wwids for existing devices during startup
Refresh 0136-RHBZ-1304687-wait-for-map-add.patch
Refresh 0150-RHBZ-1253913-fix-startup-msg.patch
Modify 0159-UPBZ-1255885-udev-waits.patch
* fix bug in failure path
Add 0160-RH-udev-flags.patch
Add 0161-RHBZ-1311659-no-kpartx.patch
* skip_kpartx option disables kpartx running on multipath devices
Add 0162-RHBZ-1333331-huawei-config.patch
* Add default config for Huawei XSG1 array
Add 0163-UPBZ-1333492-resize-map.patch
* restore old size if resize fails
Add 0164-RHBZ-1311463-dos-part-rollover.patch
* fix incorrect partition size due to 4k device size rollover
Add 0165-UPBZ-1341748-MSA-2040-conf.patch
* Add default config for MSA 2040 array
Add 0166-RHBZ-1323429-dont-allow-new-wwid.patch
* don't allow path wwid to change while it is in use
Add 0167-RHBZ-1335176-fix-show-cmds.patch
* and new show multipath format wildcard, 'f' to sho number of failures.
This will hopefully be useful for tracking what happens to multipath
devices for bz #1335176
Add 0168-RHBZ-1347769-shared-lock.patch
* make multipath lock the path devices with a shared lock
Add 0169-UPBZ-1353357-json-output.patch
* add mulitpathd json output command
Add 0170-UPBZ-1352925-fix-typo.patch
Add 0171-UPBZ-1356651-allow-zero-size.patch
* Allow zero-sized paths to be added to a multipath device
Add 0172-RHBZ-1350931-no-active-add.patch
* Allow paths to be added to a new map if no active paths exist. Also
fixes 1351430
- Modify 0005-RH-add-mpathconf.patch
* changed warning message
- Modify 0102-RHBZ-1160478-mpathconf-template.patch
* updated man page
- Modify 0104-RHBZ-631009-deferred-remove.patch
* refactor code and minor fix
- Refresh 0107-RHBZ-1169935-no-new-devs.patch
- Refresh 0112-RHBZ-1194917-add-config_dir-option.patch
- Refresh 0126-RHBZ-1211383-alias-collision.patch
- Add 0133-RHBZ-1296979-fix-define.patch
* look for the correct libudev function to set define
- Add 0134-RHBZ-1241528-check-mpath-prefix.patch
* only touch devices with a "mpath-" dm uuid prefix
- Add 0135-RHBZ-1299600-path-dev-uevents.patch
* trigger path uevent the first time a path is claimed by multipath
- Add 0136-RHBZ-1304687-wait-for-map-add.patch
* wait for the device to finish being added before reloading it.
- Add 0137-RHBZ-1280524-clear-chkr-msg.patch
- Add 0138-RHBZ-1288660-fix-mpathconf-allow.patch
* don't remove existing lines from blacklist_exceptions section
- Add 0139-RHBZ-1273173-queue-no-daemon-doc.patch
- Add 0140-RHBZ-1299647-fix-help.patch
- Add 0141-RHBZ-1303953-mpathpersist-typo.patch
- Add 0142-RHBZ-1283750-kpartx-fix.patch
* only remove devices if their uuid says that they are the correct
partition device
- Add 0143-RHBZ-1299648-kpartx-sync.patch
* default to using udev sync mode
- Add 0144-RHBZ-1299652-alua-pref-arg.patch
* allow "exclusive_pref_bit" argument to alua prioritizer
- Add 0145-UP-resize-help-msg.patch
- Add 0146-UPBZ-1299651-raw-output.patch
* allow raw format mutipathd show commands, that remove headers and padding
- Add 0147-RHBZ-1272620-fail-rm-msg.patch
- Add 0148-RHBZ-1292599-verify-before-remove.patch
* verify that all partitions are unused before attempting to remove a device
- Add 0149-RHBZ-1292599-restore-removed-parts.patch
* don't disable kpartx when restoring the first path of a device.
- Add 0150-RHBZ-1253913-fix-startup-msg.patch
* wait for multipathd daemon to write pidfile before returning
- Add 0151-RHBZ-1297456-weighted-fix.patch
* add wwn keyword to weighted prioritizer for persistent naming
- Add 0152-RHBZ-1269293-fix-blk-unit-file.patch
* use "Wants" instead of "Requires"
- Add 0153-RH-fix-i686-size-bug.patch
* use 64-bit keycodes for multipathd client commands
- Add 0154-UPBZ-1291406-disable-reinstate.patch
* don't automatically reinstate ghost paths for implicit alua devices
- Add 0155-UPBZ-1300415-PURE-config.patch
* Add default config for PURE FlashArray
- Add 0156-UPBZ-1313324-dont-fail-discovery.patch
* don't fail discovery because individual paths failed.
- Add 0157-RHBZ-1319853-multipath-c-error-msg.patch
* better error reporting for multipath -c
- Add 0158-RHBZ-1318581-timestamp-doc-fix.patch
* add documentation for -T
- Add 0159-UPBZ-1255885-udev-waits.patch
* make multipath and kpartx wait after for udev after each command
Modify 0104-RHBZ-631009-deferred-remove.patch
* add man page info
Refresh 0112-RHBZ-1194917-add-config_dir-option.patch
Refresh 0114-RHBZ-1196394-delayed-reintegration.patch
Add 0118-UPBZ-1200738-update-eternus-config.patch
* update default config
Add 0119-RHBZ-1081397-save-alua-info.patch
* make prioritizers save information between calls to speed them up.
Add 0120-RHBZ-1043093-realloc-fix.patch
* free old memory if realloc fails.
Add 0121-RHBZ-1197234-rules-fix.patch
* make sure kpartx runs after an DM_ACTIVATION event occurs.
Add 0122-RHBZ-1212590-dont-use-var.patch
* use /run instead of /var/run
Add 0123-UPBZ-1166072-fix-path-offline.patch
* Don't mark quiesce and transport-offline paths as offline
Add 0124-RHBZ-1209275-retrigger-uevents.patch
* Make multipathd retrigger uevents when paths haven't successfully had
their udev_attribute environment variable set by udev and add
"retrigger_ties" and "retrigger_delay" to control this
Add 0125-RHBZ-1153832-kpartx-delete.patch
* Delete all partition devices with -d (not just the ones in the partition
table)
Add 0126-RHBZ-1211383-alias-collision.patch
* make multipathd use the old alias, if rename failed and add
"new_bindings_in_boot" to determine if new bindings can be added to
the bindings file in the initramfs
Add 0127-RHBZ-1201030-use-blk-availability.patch
* Make multipath use blk-availability.service
Add 0128-RHBZ-1222123-mpathconf-allow.patch
* Add mpathconf --allow for creating specialized config files.
Add 0129-RHBZ-1241774-sun-partition-numbering.patch
* Make kpartx correctly number sun partitions.
Add 0111-RH-dont-show-pg-timeout.patch
* The kernel doesn't support pg_timeout, so multipath shouldn't
bother to display it
Add 0112-RHBZ-1194917-add-config_dir-option.patch
* multipath will now also read its configuration from files with
the .conf suffix in the directory specified by config_dir
which defaults to /etc/multipath/conf.d
Add 0113-RHBZ-1194917-cleanup.patch
* cleanup some unnecessary code
Add 0114-RHBZ-1196394-delayed-reintegration.patch
* Add "delay_watch_checks" and "delay_wait_checks" options to delay
reintegration of flakey paths.
Add 0115-RHBZ-1198418-fix-double-free.patch
* multipath was freeing the multipath alias twice if it failed to create the
multipath device.
Add 0116-UPBZ-1188179-dell-36xxi.patch
* new builtin configurations.
Add 0117-RHBZ-1198424-autodetect-clariion-alua.patch
* configure multipath to automatically detect alua settings on clariion
devices.
Modify 0107-RHBZ-1169935-no-new-devs.patch
* instead of using "-n" there is now a new configuration option,
'ignore_new_boot_devs'. If set to 'yes', multipath will ignore
devices that aren't in /etc/multipath/wwids when running in the
initramfs. This option does nothing while multipathd is running
in the real root filesystem.
Update 0109-RH-read-only-bindings.patch
Add 0103-RH-cleanup-partmaps-code.patch
* code refactoring to prepare for next patch
Add 0104-RHBZ-631009-deferred-remove.patch
* add deferred_remove option to /etc/multipath.conf
Add 0105-RHBZ-1148979-fix-partition-mapping-creation-race-with-kpartx.patch
* Only run kpartx on device activation
Add 0106-RHBZ-1159337-fix-double-free.patch
* made ev_remove_path exit immediately after failing setup_multipath,
since it handles cleaning up the device
Add 0107-RHBZ-1169935-no-new-devs.patch
* Add new multipathd option '-n' which keeps multipathd from creating
any multipath devices that aren't in the /etc/multipath/wwids file.
Add 0108-RHBZ-1153832-kpartx-remove-devs.patch
* switch from 'kpartx -a' to 'kpartx -u' to remove missing devices as
well.
Add 0109-RH-read-only-bindings.patch
* re-enabled -B option for multipathd
Add 0102-RHBZ-1160478-mpathconf-template.patch
* mpathconf no longer copies the default config template for the
docs directory. It simply writes the template itself.
Resolves: bz# 1160478
Modify multipath.conf
* remove getuid_callout example
Re-add 0050-RH-listing-speedup.patch
Add 0081-RHBZ-1066264-check-prefix-on-rename.patch
* make multipath check the prefix on kpartx partitions during rename, and
copy the existing behaviour
Add 0082-UPBZ-1109995-no-sync-turs-on-pthread_cancel.patch
* If async tur checker fails on threads, don't retry with the sync version
Add 0083-RHBZ-1080055-orphan-paths-on-reload.patch
* Fix case where pathlist wasn't getting updated properly
Add 0084-RHBZ-1110000-multipath-man.patch
* fix errors in multipath man page
Add 0085-UPBZ-1110006-datacore-config.patch
* Add support for DataCore Virtual Disk
Add 0086-RHBZ-1110007-orphan-path-on-failed-add.patch
* If multipathd fails to add path correctly, it now fully orphans the path
Add 0087-RHBZ-1110013-config-error-checking.patch
* Improve multipath.conf error checking.
Add 0088-RHBZ-1069811-configurable-prio-timeout.patch
* checker_timeout now adjusts the timeouts of the prioritizers as well.
Add 0089-RHBZ-1110016-add-noasync-option.patch
* Add a new defaults option, "force_sync", that disables the async mode
of the path checkers. This is for cases where to many parallel checkers
hog the cpu
Add 0090-UPBZ-1080038-reorder-paths-for-round-robin.patch
* make multipathd order paths for better throughput in round-robin mode
Add 0091-RHBZ-1069584-fix-empty-values-fast-io-fail-and-dev-loss.patch
* check for null pointers in configuration reading code.
Add 0092-UPBZ-1104605-reload-on-rename.patch
* Reload table on rename if necessary
Add 0093-UPBZ-1086825-user-friendly-name-remap.patch
* Keep existing user_friend_name if possible
Add 0094-RHBZ-1086825-cleanup-remap.patch
* Cleanup issues with upstream patch
Add 0095-RHBZ-1127944-xtremIO-config.patch
* Add support for EMC ExtremIO devices
Add 0096-RHBZ-979474-new-wildcards.patch
* Add N, n, R, and r path wildcards to print World Wide ids
Add 0097-RH-fix-coverity-errors.patch
* Fix a number of unterminated strings and memory leaks on failure
paths.
Add 0098-UPBZ-1067171-mutipath-i.patch
* Add -i option to ignore wwids file when checking for valid paths
Add 0099-RH-add-all-devs.patch
* Add new devices config option all_devs. This makes the configuration
overwrite the specified values in all builtin configs
Add 0100-RHBZ-1067171-multipath-i-update.patch
* make -i work correctly with find_multipaths
Add 0101-RH-adapter-name-wildcard.patch
* Add 'a' path wildcard to print adapter name
Modify 0076-RHBZ-1056686-add-hw_str_match.patch
* free temporary memory used during configuration
Add 0078-RHBZ-1054044-fix-mpathconf-manpage.patch
* fix typo
Add 0079-RHBZ-1070581-add-wwid-option.patch
* add multipath option "-a". To add a device's wwid to the wwids file
Add 0080-RHBZ-1075796-cmdline-wwid.patch
* add multipath option "-A" to add wwids specified by the kernel
command line mapth.wwid options.
Add 0074-RHBZ-1056976-dm-mpath-rules.patch
* Add rules to keep from doing work in udev if there are no
active paths, or if the event was for a multipath device
reloading its table due to a path change.
Add 0075-RHBZ-1056976-reload-flag.patch
* multipath code to identify reloads that the new rules can
ignore
Add 0076-RHBZ-1056686-add-hw_str_match.patch
* add a new default config paramter, "hw_str_match", to make user
device configs only overwrite builtin device configs if the
identifier strings match exactly, like the default in RHEL6.
Modify 0072-RHBZ-1039199-check-loop-control.patch
* only call close on the /dev/loop-control fd the open succeeds
Add 0073-RH-update-build-flags.patch
* fix print call to work with -Werror=format-security compile flag
Add 0072-RHBZ-1039199-check-loop-control.patch
* Make kpartx use LOOP_CTL_GET_FREE and loop-control to find a free
loop device. This will autoload the loop module.
Add 0067-RHBZ-1022899-fix-udev-partition-handling.patch
* Make sure to wipe partition devices on change event if they weren't
wiped on the device add event
Add 0068-RHBZ-1034578-label-partition-devices.patch
* Make sure that partition devices are labeled like the whole device
Add 0069-UPBZ-1033791-improve-rdac-checker.patch
* Use RTPG data in RDAC checker
Add 0070-RHBZ-1036503-blacklist-td-devs.patch
Add 0071-RHBZ-1031546-strip-dev.patch
* make multipathd interactive commands able to handle /dev/<devnode>
instead of just <devnode>
Add 0063-RH-fix-warning.patch
* Fix complier warning
0064-fix-ID_FS-attrs.patch
* make multipath create a timestamp file /run/multipathd/timestamp, and
add -T<timestamp>:<valid> option to shortcut processing if the
timestamp hasn't changed
Add 0061-RH-display-find-mpaths.patch
* display the find_multipaths value in show config
Add 0062-RH-dont-free-vecs.patch
* don't free the vecs structure on shutdown. It's more pain than
it's worth.
Modify 0015-RH-fix-output-buffer.patch
* Fix memory leak
Add 0048-RH-print-defaults.patch
Add 0049-RH-remove-ID_FS_TYPE.patch
* remove ID_FS_TYPE udev enviroment variable for multipath devices
Add 0051-UP-fix-cli-resize.patch
* check before dereferencing variables
Add 0052-RH-fix-bad-derefs.patch
* setup multipath free the multipath device when it fails, so don't keep
using it.
Add 0053-UP-fix-failback.patch
* setting failback in the devices section was broken
Add 0054-UP-keep-udev-ref.patch
* multipathd needs to keep the same udev object across reconfigures
Add 0055-UP-handle-quiesced-paths.patch
* quiesced paths should be treated as down
Add 0056-UP-alua-prio-fix.patch
* Don't count the preferred bit for paths that are active/optimized
Add 0057-UP-fix-tmo.patch
* Cleanup how multipath sets dev_loss_tmo and fast_io_fail_tmo. Also
make multipath get changing values directly from sysfs, instead of
from udev, which caches them.
Add 0058-UP-fix-failback.patch
* make failback print the default value when you show configs.
Add 0059-UP-flush-failure-queueing.patch
* If you can't flush a multipath device, restore the queue_if_no_paths
value
Add 0060-UP-uevent-loop-udev.patch
* make ueventloop grab it's own udev reference, since it is cancelled
asychnrously.
Add 0044-RHBZ-976688-fix-wipe-wwids.patch
* Seek back to the start of the file after truncating it
Add 0045-RHBZ-977297-man-page-fix.patch
* update man page to match actual defaults
Add 0046-RHBZ-883981-move-udev-rules.patch
* move udev rules file from /lib to /usr/lib
Resolves: bz #883981, #976688, #977297
Add 0038-RHBZ-799860-netapp-config.patch
Add 0039-RH-detect-prio-fix.patch
* Don't autodetect ALUA prioritizer unless it actually can get a priority
Add 0040-RH-bindings-fix.patch
* Do a better job of trying to get the first free user_friendly_name
Add 0041-RH-check-for-erofs.patch
* Don't create/reload a device read-only unless doing it read/write fails
with EROFS
Remove 0017-RH-fix-sigusr1.patch
* fix signal handling upstream way instead
Add 0042-UP-fix-signal-handling.patch
* uxlsnr now handles all the signals sent to multipathd. This makes its
signal handling posix compliant, and harder to mess up.
Add 0043-RH-signal-waiter.patch
* ioctl isn't a pthread cancellation point. Send a signal to the waiter
thread to break out of waiting in ioctl for a dm event.
Add 0032-RHBZ-956464-mpathconf-defaults.patch
* fix defaults listed in usage
Add 0033-RHBZ-829963-e-series-conf.patch
Add 0034-RHBZ-851416-mpathconf-display.patch
* display whether or not multipathd is running in the status
Add 0035-RHBZ-891921-list-mpp.patch
* add a new path format wilcard to list the multipath device associated
with a path
Add 0036-RHBZ-949239-load-multipath-module.patch
* load the dm-multipath kernel module when multipathd starts
Add 0037-RHBZ-768873-fix-rename.patch
* When deciding on a multipth devices name on reload, don't default to
the existing name if there is no config file alias and user_friendly_names
isn't set. Use the wwid.
Modify multipath.conf
Resolves: bz #768873, #950252
Add 0031-RHBZ-957188-kpartx-use-dm-name.patch
* use the basename of the devices that will be created to choose the
delimiter instead of using the device name from the command line
Resolves: bz #957188
Add 0026-fix-checker-time.patch
* Once multipathd hit it max checker interval, it was reverting to
to shortest checker interval
Add 0027-RH-get-wwid.patch
* Multipath wasn't correctly setting the multipath wwid when it read devices
in from the kernel
Add 0028-RHBZ-929078-refresh-udev-dev.patch
* Make multipath try to get the UID of down devices. Also, on ev_add_path,
make multipathd reinitialize existing devices that weren't fully
initialized before.
Add 0021-RHBZ-919119-respect-kernel-cmdline.patch
* keep the multipath.rules udev file from running and multipathd from
starting if nompath is on the kernel command line
Add 0022-RH-multipathd-check-wwids.patch
* Whenever multipath runs configure, it will check the wwids, and
add any missing ones to the wwids file
Add 0023-RH-multipath-wipe-wwid.patch
* multipath's -w command will remove a wwid from the wwids file
Add 0024-RH-multipath-wipe-wwids.patch
* multipath's -W command will set reset the wwids file to just the current
devices
Add 0025-UPBZ-916668_add_maj_min.patch
Resolves: bz #919119
Updated to latest upstrem 0.4.9 code: multipath-tools-130222
(git commit id: 67b82ad6fe280caa1770025a6bb8110b633fa136)
Refresh 0001-RH-dont_start_with_no_config.patch
Modify 0002-RH-multipath.rules.patch
Modify 0003-RH-Make-build-system-RH-Fedora-friendly.patch
Refresh 0004-RH-multipathd-blacklist-all-by-default.patch
Refresh 0005-RH-add-mpathconf.patch
Refresh 0006-RH-add-find-multipaths.patch
Add 0008-RH-revert-partition-changes.patch
Rename 0008-RH-RHEL5-style-partitions.patch to
0009-RH-RHEL5-style-partitions.patch
Rename 0009-RH-dont-remove-map-on-enomem.patch to
0010-RH-dont-remove-map-on-enomem.patch
Rename 0010-RH-deprecate-uid-gid-mode.patch to
0011-RH-deprecate-uid-gid-mode.patch
Rename 0013-RH-kpartx-msg.patch to 0012-RH-kpartx-msg.patch
Rename 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch to
0013-RHBZ-883981-cleanup-rpmdiff-issues.patch
Rename 0039-RH-handle-other-sector-sizes.patch to
0014-RH-handle-other-sector-sizes.patch
Rename 0040-RH-fix-output-buffer.patch to 0015-RH-fix-output-buffer.patch
Add 0016-RH-dont-print-ghost-messages.patch
Add 0017-RH-fix-sigusr1.patch
* Actually this fixes a number of issues related to signals
Rename 0018-RH-remove-config-dups.patch to 0018-RH-fix-factorize.patch
* just the part that isn't upstream
Add 0019-RH-fix-sockets.patch
* makes abstract multipathd a cli sockets use the correct name.
Set find_multipaths in the default config
Add 0034-RHBZ-887737-check-for-null-key.patch
Add 0035-RHBZ-883981-cleanup-rpmdiff-issues.patch
* Compile multipathd with full RELRO and PIE and install to /usr
