ngompa/kernel-rpm
1
0
Fork 0
forked from rpms/kernel
Code Pull Requests Activity

fixes for Marvell a37xx EspressoBin, latest RPi3+ patches, rebase fixes for lan78xx

Browse Source
This commit is contained in:
Peter Robinson 2018-04-25 00:00:30 +01:00
parent fa7ce1c7b8
commit 215fbf0212
5 changed files with 1185 additions and 260 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

473
bcm2837-lan78xx-fixes.patch
View File

@ -1,79 +1,452 @@
From 6ed88d188a8240ba44da6578eab7d17e036d0e61 Mon Sep 17 00:00:00 2001 From bce4fe9fa48df0cbbe842e80d9a520f7265b4cd4 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org> From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Tue, 17 Oct 2017 15:04:29 +0100 Date: Wed, 4 Apr 2018 16:34:24 +0100
Subject: [PATCH] lan78xx: Enable LEDs if no valid EEPROM or OTP Subject: [PATCH 5/9] net: lan78xx: Allow for VLAN headers in timeout.
For applications of the LAN78xx that don't have valid programmed The frame abort timeout being set by lan78xx_set_rx_max_frame_length
EEPROMs or OTPs, enabling both LEDs by default seems reasonable. didn't account for any VLAN headers, resulting in very low
throughput if used with tagged VLANs.
Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this.
Signed-off-by: Phil Elwell <phil@raspberrypi.org> See https://github.com/raspberrypi/linux/issues/2458
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
--- ---
drivers/net/usb/lan78xx.c | 6 ++++++ drivers/net/usb/lan78xx.c | 5 +++--
1 file changed, 6 insertions(+) 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index a21039852f8d..cd20ce4ed87d 100644 index 0867f7275852..5b46998a6dce 100644
--- a/drivers/net/usb/lan78xx.c --- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c
@@ -2414,6 +2414,12 @@ static int lan78xx_reset(struct lan78xx_net *dev) @@ -2178,7 +2178,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
if ((ll_mtu % dev->maxpacket) == 0)
return -EDOM;
ret = lan78xx_read_reg(dev, HW_CFG, &buf); - ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
buf |= HW_CFG_MEF_; + ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
+
+ /* If no valid EEPROM and no valid OTP, enable the LEDs by default */
+ if (lan78xx_read_eeprom(dev, 0, 0, NULL) &&
+ lan78xx_read_otp(dev, 0, 0, NULL))
+ buf |= HW_CFG_LED0_EN_ | HW_CFG_LED1_EN_;
+
ret = lan78xx_write_reg(dev, HW_CFG, buf);
ret = lan78xx_read_reg(dev, USB_CFG0, &buf); netdev->mtu = new_mtu;
From 4a4710f3847cd087e150f83382dffd92e09d9914 Mon Sep 17 00:00:00 2001
@@ -2467,7 +2467,8 @@ static int lan78xx_reset(struct lan78xx_net *dev)
buf |= FCT_TX_CTL_EN_;
ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf);
- ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
+ ret = lan78xx_set_rx_max_frame_length(dev,
+ dev->net->mtu + VLAN_ETH_HLEN);
ret = lan78xx_read_reg(dev, MAC_RX, &buf);
buf |= MAC_RX_RXEN_;
--
2.17.0
From 6fecd97fd35e9c624d101495ca34c83b1cb23e3d Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Mon, 9 Apr 2018 14:31:54 +0100
Subject: [PATCH 6/9] net: lan78xx: Request s/w csum check on VLAN tagged
packets.
There appears to be some issue in the LAN78xx where the checksum
computed on a VLAN tagged packet is incorrect, or at least not
in the form that the kernel is after. This is most easily shown
by pinging a device via a VLAN tagged interface and it will dump
out the error message and stack trace from netdev_rx_csum_fault.
It has also been seen with standard TCP and UDP packets.
Until this is fully understood, request that the network stack
computes the checksum on packets signalled as having a VLAN tag
applied.
See https://github.com/raspberrypi/linux/issues/2458
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/net/usb/lan78xx.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 5b46998a6dce..6b61bb21f2ae 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2920,8 +2920,12 @@ static void lan78xx_rx_csum_offload(struct lan78xx_net *dev,
struct sk_buff *skb,
u32 rx_cmd_a, u32 rx_cmd_b)
{
+ /* Checksum offload appears to be flawed if used with VLANs.
+ * Elect for sw checksum check instead.
+ */
if (!(dev->net->features & NETIF_F_RXCSUM) ||
- unlikely(rx_cmd_a & RX_CMD_A_ICSM_)) {
+ unlikely(rx_cmd_a & RX_CMD_A_ICSM_) ||
+ (rx_cmd_a & RX_CMD_A_FVTG_)) {
skb->ip_summed = CHECKSUM_NONE;
} else {
skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_));
--
2.17.0
From 7528d39c5d01383fadb17a84b9840f9f685d1e0b Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org> From: Phil Elwell <phil@raspberrypi.org>
Date: Sat, 17 Mar 2018 00:10:02 +0100 Date: Thu, 19 Apr 2018 17:59:38 +0100
Subject: [PATCH] lan78xx: Read MAC address from DT if present Subject: [PATCH 7/9] lan78xx: Read MAC address from DT if present
There is a standard mechanism for locating and using a MAC address from There is a standard mechanism for locating and using a MAC address from
the Device Tree. Use this facility in the lan78xx driver to support the Device Tree. Use this facility in the lan78xx driver to support
applications without programmed EEPROM or OTP. applications without programmed EEPROM or OTP. At the same time,
regularise the handling of the different address sources.
Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
--- ---
drivers/net/usb/lan78xx.c | 10 ++++++++++ drivers/net/usb/lan78xx.c | 42 +++++++++++++++++++--------------------
1 file changed, 10 insertions(+) 1 file changed, 20 insertions(+), 22 deletions(-)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 60a604cc7647..a21039852f8d 100644 index 6b61bb21f2ae..6c38a74bb32d 100644
--- a/drivers/net/usb/lan78xx.c --- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c
@@ -36,6 +36,7 @@ @@ -37,6 +37,7 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h> #include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h> #include <linux/microchipphy.h>
+#include <linux/of_net.h>
#include <linux/phy.h> #include <linux/phy.h>
+#include <linux/of_net.h>
#include "lan78xx.h" #include "lan78xx.h"
@@ -1639,6 +1640,14 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev) #define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
u32 addr_lo, addr_hi; @@ -1652,34 +1653,31 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
int ret; addr[5] = (addr_hi >> 8) & 0xFF;
u8 addr[6];
+ const u8 *mac_addr; if (!is_valid_ether_addr(addr)) {
- /* reading mac address from EEPROM or OTP */
- if ((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
- addr) == 0) ||
- (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
- addr) == 0)) {
- if (is_valid_ether_addr(addr)) {
- /* eeprom values are valid so use them */
- netif_dbg(dev, ifup, dev->net,
- "MAC address read from EEPROM");
- } else {
- /* generate random MAC */
- random_ether_addr(addr);
- netif_dbg(dev, ifup, dev->net,
- "MAC address set to random addr");
- }
-
- addr_lo = addr[0] | (addr[1] << 8) |
- (addr[2] << 16) | (addr[3] << 24);
- addr_hi = addr[4] | (addr[5] << 8);
-
- ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
- ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+ if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) {
+ /* valid address present in Device Tree */
+ netif_dbg(dev, ifup, dev->net,
+ "MAC address read from Device Tree");
+ } else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
+ ETH_ALEN, addr) == 0) ||
+ (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
+ ETH_ALEN, addr) == 0)) &&
+ is_valid_ether_addr(addr)) {
+ /* eeprom values are valid so use them */
+ netif_dbg(dev, ifup, dev->net,
+ "MAC address read from EEPROM");
} else {
/* generate random MAC */
random_ether_addr(addr);
netif_dbg(dev, ifup, dev->net,
"MAC address set to random addr");
}
+ +
+ /* maybe the boot loader passed the MAC address in devicetree */ + addr_lo = addr[0] | (addr[1] << 8) |
+ mac_addr = of_get_mac_address(dev->udev->dev.of_node); + (addr[2] << 16) | (addr[3] << 24);
+ if (mac_addr) { + addr_hi = addr[4] | (addr[5] << 8);
+ ether_addr_copy(addr, mac_addr); +
+ goto set_mac_addr; + ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+ ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
}
ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
--
2.17.0
From f8f9ad43b37f5db5895619e4304aa9ba286cbbb0 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 19 Apr 2018 17:59:40 +0100
Subject: [PATCH 8/9] dt-bindings: Document the DT bindings for lan78xx
The Microchip LAN78XX family of devices are Ethernet controllers with
a USB interface. Despite being discoverable devices it can be useful to
be able to configure them from Device Tree, particularly in low-cost
applications without an EEPROM or programmed OTP.
Document the supported properties in a bindings file.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
.../bindings/net/microchip,lan78xx.txt | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/microchip,lan78xx.txt
diff --git a/Documentation/devicetree/bindings/net/microchip,lan78xx.txt b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
new file mode 100644
index 000000000000..76786a0f6d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan78xx.txt
@@ -0,0 +1,54 @@
+Microchip LAN78xx Gigabit Ethernet controller
+
+The LAN78XX devices are usually configured by programming their OTP or with
+an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
+The Device Tree properties, if present, override the OTP and EEPROM.
+
+Required properties:
+- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
+
+Optional properties:
+- local-mac-address: see ethernet.txt
+- mac-address: see ethernet.txt
+
+Optional properties of the embedded PHY:
+- microchip,led-modes: a 0..4 element vector, with each element configuring
+ the operating mode of an LED. Omitted LEDs are turned off. Allowed values
+ are defined in "include/dt-bindings/net/microchip-lan78xx.h".
+
+Example:
+
+/* Based on the configuration for a Raspberry Pi 3 B+ */
+&usb {
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,7800";
+ reg = <1>;
+ local-mac-address = [ 00 11 22 33 44 55 ];
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ eth_phy: ethernet-phy@1 {
+ reg = <1>;
+ microchip,led-modes = <
+ LAN78XX_LINK_1000_ACTIVITY
+ LAN78XX_LINK_10_100_ACTIVITY
+ >;
+ };
+ };
+ };
+ };
+ };
+};
--
2.17.0
From be24db04ec2949e9b03763366f100ae40836c61e Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 23 Apr 2018 14:31:26 +0100
Subject: [PATCH 9/9] lan78xx: Read LED states from Device Tree
Add support for DT property "microchip,led-modes", a vector of zero
to four cells (u32s) in the range 0-15, each of which sets the mode
for one of the LEDs. Some possible values are:
0=link/activity 1=link1000/activity
2=link100/activity 3=link10/activity
4=link100/1000/activity 5=link10/1000/activity
6=link10/100/activity 14=off 15=on
These values are given symbolic constants in a dt-bindings header.
Also use the presence of the DT property to indicate that the
LEDs should be enabled - necessary in the event that no valid OTP
or EEPROM is available.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
MAINTAINERS | 1 +
drivers/net/phy/microchip.c | 25 ++++++++++++++++
drivers/net/usb/lan78xx.c | 32 ++++++++++++++++++++-
include/dt-bindings/net/microchip-lan78xx.h | 21 ++++++++++++++
include/linux/microchipphy.h | 3 ++
5 files changed, 81 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/net/microchip-lan78xx.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 6e950b8b4a41..c7d5f8c60a2c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14437,6 +14437,7 @@ M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/usb/lan78xx.*
+F: include/dt-bindings/net/microchip-lan78xx.h
USB MASS STORAGE DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index a97ac8c12c4c..2d67937866a3 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -21,6 +21,8 @@
#include <linux/phy.h>
#include <linux/microchipphy.h>
#include <linux/delay.h>
+#include <linux/of.h>
+#include <dt-bindings/net/microchip-lan78xx.h>
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "Microchip LAN88XX PHY driver"
@@ -225,6 +227,8 @@ static int lan88xx_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct lan88xx_priv *priv;
+ u32 led_modes[4];
+ int len;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -232,6 +236,27 @@ static int lan88xx_probe(struct phy_device *phydev)
priv->wolopts = 0;
+ len = of_property_read_variable_u32_array(dev->of_node,
+ "microchip,led-modes",
+ led_modes,
+ 0,
+ ARRAY_SIZE(led_modes));
+ if (len >= 0) {
+ u32 reg = 0;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (led_modes[i] > 15)
+ return -EINVAL;
+ reg |= led_modes[i] << (i * 4);
+ }
+ for (; i < ARRAY_SIZE(led_modes); i++)
+ reg |= LAN78XX_FORCE_LED_OFF << (i * 4);
+ (void)phy_write(phydev, LAN78XX_PHY_LED_MODE_SELECT, reg);
+ } else if (len == -EOVERFLOW) {
+ return -EINVAL;
+ } + }
+
/* these values can be used to identify internal PHY */
priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 6c38a74bb32d..01b876daa600 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -37,6 +37,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
#include <linux/phy.h>
+#include <linux/of_mdio.h>
#include <linux/of_net.h>
#include "lan78xx.h"
ret = lan78xx_read_reg(dev, RX_ADDRL, &addr_lo); @@ -1760,6 +1761,7 @@ static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
ret = lan78xx_read_reg(dev, RX_ADDRH, &addr_hi);
@@ -1667,6 +1676,7 @@ static void lan78xx_init_mac_address(struct lan78xx_net *dev)
"MAC address set to random addr");
}
+set_mac_addr: static int lan78xx_mdio_init(struct lan78xx_net *dev)
addr_lo = addr[0] | (addr[1] << 8) | {
(addr[2] << 16) | (addr[3] << 24); + struct device_node *node;
addr_hi = addr[4] | (addr[5] << 8); int ret;
dev->mdiobus = mdiobus_alloc();
@@ -1788,7 +1790,13 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
break;
}
- ret = mdiobus_register(dev->mdiobus);
+ node = of_get_child_by_name(dev->udev->dev.of_node, "mdio");
+ if (node) {
+ ret = of_mdiobus_register(dev->mdiobus, node);
+ of_node_put(node);
+ } else {
+ ret = mdiobus_register(dev->mdiobus);
+ }
if (ret) {
netdev_err(dev->net, "can't register MDIO bus\n");
goto exit1;
@@ -2077,6 +2085,28 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
phydev->advertising |= mii_adv_to_ethtool_adv_t(mii_adv);
+ if (phydev->mdio.dev.of_node) {
+ u32 reg;
+ int len;
+
+ len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
+ "microchip,led-modes",
+ sizeof(u32));
+ if (len >= 0) {
+ /* Ensure the appropriate LEDs are enabled */
+ lan78xx_read_reg(dev, HW_CFG, &reg);
+ reg &= ~(HW_CFG_LED0_EN_ |
+ HW_CFG_LED1_EN_ |
+ HW_CFG_LED2_EN_ |
+ HW_CFG_LED3_EN_);
+ reg |= (len > 0) * HW_CFG_LED0_EN_ |
+ (len > 1) * HW_CFG_LED1_EN_ |
+ (len > 2) * HW_CFG_LED2_EN_ |
+ (len > 3) * HW_CFG_LED3_EN_;
+ lan78xx_write_reg(dev, HW_CFG, reg);
+ }
+ }
+
genphy_config_aneg(phydev);
dev->fc_autoneg = phydev->autoneg;
diff --git a/include/dt-bindings/net/microchip-lan78xx.h b/include/dt-bindings/net/microchip-lan78xx.h
new file mode 100644
index 000000000000..0742ff075307
--- /dev/null
+++ b/include/dt-bindings/net/microchip-lan78xx.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _DT_BINDINGS_MICROCHIP_LAN78XX_H
+#define _DT_BINDINGS_MICROCHIP_LAN78XX_H
+
+/* LED modes for LAN7800/LAN7850 embedded PHY */
+
+#define LAN78XX_LINK_ACTIVITY 0
+#define LAN78XX_LINK_1000_ACTIVITY 1
+#define LAN78XX_LINK_100_ACTIVITY 2
+#define LAN78XX_LINK_10_ACTIVITY 3
+#define LAN78XX_LINK_100_1000_ACTIVITY 4
+#define LAN78XX_LINK_10_1000_ACTIVITY 5
+#define LAN78XX_LINK_10_100_ACTIVITY 6
+#define LAN78XX_DUPLEX_COLLISION 8
+#define LAN78XX_COLLISION 9
+#define LAN78XX_ACTIVITY 10
+#define LAN78XX_AUTONEG_FAULT 12
+#define LAN78XX_FORCE_LED_OFF 14
+#define LAN78XX_FORCE_LED_ON 15
+
+#endif
diff --git a/include/linux/microchipphy.h b/include/linux/microchipphy.h
index 8f9c90379732..fd1fc8c248ef 100644
--- a/include/linux/microchipphy.h
+++ b/include/linux/microchipphy.h
@@ -78,4 +78,7 @@
#define LAN88XX_EXT_PAGE_TR_LOW_DATA 17
#define LAN88XX_EXT_PAGE_TR_HIGH_DATA 18
+/* Registers specific to the LAN7800/LAN7850 embedded phy */
+#define LAN78XX_PHY_LED_MODE_SELECT (0x1D)
+
#endif /* _MICROCHIPPHY_H */
--
2.17.0

560
bcm2837-rpi-initial-3plus-support.patch Normal file
View File

@ -0,0 +1,560 @@
From patchwork Sat Apr 21 11:28:34 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [V2,1/9] ARM: dts: bcm283x: Fix PWM pin assignment
From: Stefan Wahren <stefan.wahren@i2se.com>
X-Patchwork-Id: 10354085
Message-Id: <1524310122-9439-2-git-send-email-stefan.wahren@i2se.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 13:28:34 +0200
All RPi 1 and 2 boards used the PWM (audio out) on pin 40 and 45.
So it was easy to define them in bcm2835-rpi.dtsi. Starting with RPi 3
this wont work anymore, because it uses pin 40 and 41. Furthermore the
Zero variants doesn't have audio out.
This patch fixes this pin conflict by moving the PWM node to the board-level.
Change summary:
RPi 3 B: PWM1 45 -> 41
Zero, Zero W: PWM disabled
all other: no functional change
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 6 ++++++
arch/arm/boot/dts/bcm2835-rpi-a.dts | 6 ++++++
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 6 ++++++
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 6 ++++++
arch/arm/boot/dts/bcm2835-rpi-b.dts | 6 ++++++
arch/arm/boot/dts/bcm2835-rpi.dtsi | 6 ------
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 6 ++++++
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 6 ++++++
8 files changed, 42 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index aa1fc7b..2cd9c5e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -101,6 +101,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 425f6b0..067d1f0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -96,6 +96,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index effa195..cfbdaac 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -103,6 +103,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index 772ec3b..5641d16 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -96,6 +96,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 434483d..31ff602 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -91,6 +91,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 6c3cfaa..cb2d6d7 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -83,12 +83,6 @@
bus-width = <4>;
};
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
- status = "okay";
-};
-
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index 5c339ad..2fef70a 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -41,6 +41,12 @@
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_gpio14>;
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 0b31d99..cc39b6f 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -42,6 +42,12 @@
};
};
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+ status = "okay";
+};
+
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
From patchwork Sat Apr 21 11:28:35 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [V2,2/9] ARM: dts: bcm2837: Add missing GPIOs of Expander
From: Stefan Wahren <stefan.wahren@i2se.com>
X-Patchwork-Id: 10354079
Message-Id: <1524310122-9439-3-git-send-email-stefan.wahren@i2se.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 13:28:35 +0200
After commit a98d90e7d588 ("gpio: raspberrypi-exp: Driver for RPi3 GPIO
expander via mailbox service") we are able to control the rest of the
GPIOs of the RPi 3. So add all the missing parts (ACT LED,
Wifi & BT control, HDMI detect) to the DT.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index cc39b6f..c318bcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -20,9 +20,14 @@
leds {
act {
- gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
};
};
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
};
&firmware {
@@ -48,6 +53,10 @@
status = "okay";
};
+&hdmi {
+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+};
+
/* uart0 communicates with the BT module */
&uart0 {
pinctrl-names = "default";
@@ -57,6 +66,7 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
};
};
@@ -69,11 +79,19 @@
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio34>;
status = "okay";
bus-width = <4>;
non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
};
/* SDHOST is used to drive the SD card */
From patchwork Sat Apr 21 11:28:36 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [V2,3/9] dt-bindings: bcm: Add Raspberry Pi 3 B+
From: Stefan Wahren <stefan.wahren@i2se.com>
X-Patchwork-Id: 10354081
Message-Id: <1524310122-9439-4-git-send-email-stefan.wahren@i2se.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 13:28:36 +0200
This adds the root properties for the Raspberry Pi 3 B+
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
index 3e3efa0..1e3e29a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
@@ -34,6 +34,10 @@ Raspberry Pi 3 Model B
Required root node properties:
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+Raspberry Pi 3 Model B+
+Required root node properties:
+compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
From patchwork Sat Apr 21 11:28:37 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [V2,4/9] ARM: dts: bcm2837: Add Raspberry Pi 3 B+
From: Stefan Wahren <stefan.wahren@i2se.com>
X-Patchwork-Id: 10354075
Message-Id: <1524310122-9439-5-git-send-email-stefan.wahren@i2se.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 13:28:37 +0200
The Raspberry Pi 3 B+ has the following major differences compared
to the model 3 B:
* Microchip LAN7515 (Gigabit Ethernet with integrated USB 2.0 HUB)
* Cypress CYW43455 (802.11n/ac and BT 4.2)
We need to add the USB LAN chip so the bootloader can add the MAC address.
This is necessary because there ain't an EEPROM or a valid OTP.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 108 +++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 27 ++++++++
3 files changed, 136 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7e24249..a300a35 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 0000000..4adb85e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B+";
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "STATUS_LED",
+ "LAN_RUN",
+ "",
+ "CAM_GPIO0",
+ "CAM_GPIO1",
+ "";
+ status = "okay";
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+ status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 0000000..9403da0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ aliases {
+ ethernet0 = &ethernet;
+ };
+};
+
+&usb {
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb-port@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: ethernet@1 {
+ compatible = "usb424,7800";
+ reg = <1>;
+ };
+ };
+ };
+};
From patchwork Sat Apr 21 11:28:42 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [V2,9/9] arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
From: Stefan Wahren <stefan.wahren@i2se.com>
X-Patchwork-Id: 10354077
Message-Id: <1524310122-9439-10-git-send-email-stefan.wahren@i2se.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
Eric Anholt <eric@anholt.net>, Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>
Cc: Stefan Wahren <stefan.wahren@i2se.com>, devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>, Arnd Bergmann <arnd@arndb.de>,
Scott Branden <sbranden@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Phil Elwell <phil@raspberrypi.org>, Alexander Graf <agraf@suse.de>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 13:28:42 +0200
This adds a reference to the dts of the Raspberry Pi 3 B+
in arm, so don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
---
arch/arm64/boot/dts/broadcom/Makefile | 3 ++-
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 2a2591e..1193a9e 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb
subdir-y += northstar2
subdir-y += stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 0000000..46ad202
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-3-b-plus.dts"

209
bcm2837-rpi-initial-support-for-the-3.patch
View File

@ -1,209 +0,0 @@
From defa4876ece55751c691d17ffc928d9bfe049585 Mon Sep 17 00:00:00 2001
From: Stefan Wahren <stefan.wahren@i2se.com>
Date: Fri, 16 Mar 2018 22:56:59 +0100
Subject: [PATCH] arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
This adds a reference to the dts file of the Raspberry Pi 3 B+
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
arch/arm64/boot/dts/broadcom/Makefile | 3 ++-
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index 2a2591ef1fee..1193a9e34bbb 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb
subdir-y += northstar2
subdir-y += stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..46ad2023cccf
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-3-b-plus.dts"
From c7c06c54087dfadd065abcba0b7f614f7a88d549 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Fri, 16 Mar 2018 22:42:28 +0100
Subject: [PATCH] ARM: dts: bcm2837: Add Raspberry Pi 3 B+
The Raspberry Pi 3 B+ has the following major differences compared
to the model 3 B:
* Microchip LAN7515 (Gigabit Ethernet)
* Cypress CYW43455 (802.11ac and BT 4.2)
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 102 +++++++++++++++++++++++++++++
arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi | 27 ++++++++
3 files changed, 130 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
create mode 100644 arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3b471e6787ff..dee85f848de9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
+ bcm2837-rpi-3-b-plus.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..fb9f6f7e965c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B+";
+
+ chosen {
+ /* 8250 auxiliary UART instead of pl011 */
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 29 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "STATUS_LED",
+ "LAN_RUN",
+ "",
+ "CAM_GPIO0",
+ "CAM_GPIO1",
+ "";
+ status = "okay";
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <2000000>;
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_gpio14>;
+ status = "okay";
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_gpio34>;
+ status = "okay";
+ bus-width = <4>;
+ non-removable;
+ mmc-pwrseq = <&wifi_pwrseq>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000000..169203c5ce8b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ aliases {
+ ethernet0 = &ethernet;
+ };
+};
+
+&usb {
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1_1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet: usbether@1 {
+ compatible = "usb424,7800";
+ reg = <1>;
+ };
+ };
+ };
+};

13
kernel.spec
View File

@ -594,13 +594,19 @@ Patch310: arm-tegra-fix-nouveau-crash.patch
# https://patchwork.kernel.org/patch/10346089/ # https://patchwork.kernel.org/patch/10346089/
Patch311: arm-dts-Add-am335x-pocketbeagle.patch Patch311: arm-dts-Add-am335x-pocketbeagle.patch
# https://patchwork.kernel.org/patch/10354521/
# https://patchwork.kernel.org/patch/10354187/
# https://patchwork.kernel.org/patch/10306793/
# https://patchwork.kernel.org/patch/10133165/
Patch315: mvebu-a37xx-fixes.patch
# Fix USB on the RPi https://patchwork.kernel.org/patch/9879371/ # Fix USB on the RPi https://patchwork.kernel.org/patch/9879371/
Patch320: bcm283x-dma-mapping-skip-USB-devices-when-configuring-DMA-during-probe.patch Patch320: bcm283x-dma-mapping-skip-USB-devices-when-configuring-DMA-during-probe.patch
Patch324: bcm283x-clk-audio-fixes.patch Patch324: bcm283x-clk-audio-fixes.patch
# Enabling Patches for the RPi3+ # Enabling Patches for the RPi3+
Patch330: bcm2837-rpi-initial-support-for-the-3.patch Patch330: bcm2837-rpi-initial-3plus-support.patch
Patch332: bcm2837-enable-pmu.patch Patch332: bcm2837-enable-pmu.patch
Patch333: bcm2837-lan78xx-fixes.patch Patch333: bcm2837-lan78xx-fixes.patch
@ -1872,6 +1878,11 @@ fi
# #
# #
%changelog %changelog
* Mon Apr 24 2018 Peter Robinson <pbrobinson@fedoraproject.org>
- Add fixes for Marvell a37xx EspressoBin
- Update to latest Raspberry Pi 3+ fixes
- More fixes for lan78xx on the Raspberry Pi 3+
* Tue Apr 24 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.17.0-0.rc2.git1.1 * Tue Apr 24 2018 Justin M. Forbes <jforbes@fedoraproject.org> - 4.17.0-0.rc2.git1.1
- Linux v4.17-rc2-58-g24cac7009cb1 - Linux v4.17-rc2-58-g24cac7009cb1
- Reenable debugging options. - Reenable debugging options.

190
mvebu-a37xx-fixes.patch Normal file
View File

@ -0,0 +1,190 @@
From patchwork Sun Apr 22 12:33:46 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: serial: mvebu-uart: Fix local flags handling on termios update
From: Marc Zyngier <Marc.Zyngier@arm.com>
X-Patchwork-Id: 10354521
Message-Id: <20180422123346.15538-1-marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>,
Allen Yan <yanwei@marvell.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Miquel Raynal <miquel.raynal@free-electrons.com>
Date: Sun, 22 Apr 2018 13:33:46 +0100
Commit 68a0db1d7da2 reworked the baud rate selection, but also added
a (not so) subtle change in the way the local flags (c_lflag in the
termios structure) are handled, forcing the new flags to always be the
same as the old ones.
The reason for that particular change is both obscure and undocumented.
It also completely breaks userspace. Something as trivial as getty is
unusable:
<example>
Debian GNU/Linux 9 sy-borg ttyMV0
sy-borg login: root
root
[timeout]
Debian GNU/Linux 9 sy-borg ttyMV0
</example>
which is quite obvious in retrospect: getty cannot get in control of
the echo mode, is stuck in canonical mode, and times out without ever
seeing anything valid. It also begs the question of how this change was
ever tested.
The fix is pretty obvious: stop messing with c_lflag, and the world
will be a happier place.
Cc: stable@vger.kernel.org # 4.15+
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/tty/serial/mvebu-uart.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 750e5645dc85..f503fab1e268 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -495,7 +495,6 @@ static void mvebu_uart_set_termios(struct uart_port *port,
termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR);
termios->c_cflag &= CREAD | CBAUD;
termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD);
- termios->c_lflag = old->c_lflag;
}
spin_unlock_irqrestore(&port->lock, flags);
From patchwork Sun Mar 25 19:57:36 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Subject: arm64: dts: armada-3720-espressobin: wire up spi flash
From: =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
X-Patchwork-Id: 10306793
Message-Id: <20180325195736.19782-1-u.kleine-koenig@pengutronix.de>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Ellie Reeves <ellierevves@gmail.com>,
linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de
Date: Sun, 25 Mar 2018 21:57:36 +0200
From: Ellie Reeves <ellierevves@gmail.com>
This is the storage the machine boots from by default. The partitioning
is taken from the U-Boot that is shipped with the board. There is some
more space on the flash that isn't used.
Signed-off-by: Ellie Reeves <ellierevves@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
.../boot/dts/marvell/armada-3720-espressobin.dts | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 882d6e4a04e4..5f98c2fecca4 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -108,6 +108,33 @@
status = "okay";
};
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "winbond,w25q32dw", "jedec,spi-flash";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0 0x180000>;
+ };
+
+ partition@180000 {
+ label = "ubootenv";
+ reg = <0x180000 0x10000>;
+ };
+ };
+ };
+};
+
/* Exported on the micro USB connector J5 through an FTDI */
&uart0 {
pinctrl-names = "default";
From patchwork Sat Apr 21 14:03:42 2018
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: arm64: dts: marvell: armada-37xx: reserve memory for ATF
From: Miquel Raynal <miquel.raynal@bootlin.com>
X-Patchwork-Id: 10354187
Message-Id: <20180421140342.25082-1-miquel.raynal@bootlin.com>
To: Gregory Clement <gregory.clement@bootlin.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org,
Antoine Tenart <antoine.tenart@bootlin.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Nadav Haklai <nadavh@marvell.com>, Rob Herring <robh+dt@kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>, Victor Gu <xigu@marvell.com>,
linux-arm-kernel@lists.infradead.org
Date: Sat, 21 Apr 2018 16:03:42 +0200
From: Victor Gu <xigu@marvell.com>
The PSCI area should be reserved in Linux for PSCI operations such as
suspend/resume.
Reserve 2MiB of memory which matches the area used by ATF (BL1, BL2,
BL3x, see [1] in ATF source code). This covers all PSCI code and data
area and is 2MiB aligned, which is required by Linux for huge pages
handling.
[1] plat/marvell/a3700/common/include/platform_def.h
Signed-off-by: Victor Gu <xigu@marvell.com>
[miquel.raynal@bootlin.com: reword of commit message]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 97207a61bc79..429ce91bfc39 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -22,6 +22,17 @@
serial1 = &uart1;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ psci-area@4000000 {
+ reg = <0 0x4000000 0 0x200000>;
+ no-map;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;