forked from rpms/kernel
881028f8e0
* Tue Jan 30 2024 Scott Weaver <scweaver@redhat.com> [5.14.0-415.el9]
- net: phy: mdio_device: Reset device only when necessary (Andrew Halaney) [RHEL-21837]
- r8169: prevent potential deadlock in rtl8169_close (Izabela Bakollari) [RHEL-6506]
- r8169: fix deadlock on RTL8125 in jumbo mtu mode (Izabela Bakollari) [RHEL-6506]
- r8169: fix network lost after resume on DASH systems (Izabela Bakollari) [RHEL-6506]
- r8169: add handling DASH when DASH is disabled (Izabela Bakollari) [RHEL-6506]
- r8169: respect userspace disabling IFF_MULTICAST (Izabela Bakollari) [RHEL-6506]
- r8169: fix the KCSAN reported data race in rtl_rx while reading desc->opts1 (Izabela Bakollari) [RHEL-6506]
- r8169: fix the KCSAN reported data-race in rtl_tx while reading TxDescArray[entry].opts1 (Izabela Bakollari) [RHEL-6506]
- r8169: fix the KCSAN reported data-race in rtl_tx() while reading tp->cur_tx (Izabela Bakollari) [RHEL-6506]
- r8169: fix rare issue with broken rx after link-down on RTL8125 (Izabela Bakollari) [RHEL-6506]
- r8169: use dev_err_probe in all appropriate places in rtl_init_one() (Izabela Bakollari) [RHEL-6506]
- r8169: check for PCI read error in probe (Izabela Bakollari) [RHEL-6506]
- r8169: Use a raw_spinlock_t for the register locks. (Izabela Bakollari) [RHEL-6506]
- r8169: use new macro netif_subqueue_completed_wake in the tx cleanup path (Izabela Bakollari) [RHEL-6506]
- r8169: use new macro netif_subqueue_maybe_stop in rtl8169_start_xmit (Izabela Bakollari) [RHEL-6506]
- r8169: fix ASPM-related problem for chip version 42 and 43 (Izabela Bakollari) [RHEL-6506]
- r8169: fix RTL8168H and RTL8107E rx crc error (Izabela Bakollari) [RHEL-6506]
- r8169: consolidate disabling ASPM before EPHY access (Izabela Bakollari) [RHEL-6506]
- r8169: prepare rtl_hw_aspm_clkreq_enable for usage in atomic context (Izabela Bakollari) [RHEL-6506]
- r8169: enable cfg9346 config register access in atomic context (Izabela Bakollari) [RHEL-6506]
- r8169: use spinlock to protect access to registers Config2 and Config5 (Izabela Bakollari) [RHEL-6506]
- r8169: use spinlock to protect mac ocp register access (Izabela Bakollari) [RHEL-6506]
- r8169: reset bus if NIC isn't accessible after tx timeout (Izabela Bakollari) [RHEL-6506]
- r8169: disable ASPM in case of tx timeout (Izabela Bakollari) [RHEL-6506]
- r8169: use devm_clk_get_optional_enabled() to simplify the code (Izabela Bakollari) [RHEL-6506]
- ice: alter feature support check for SRIOV and LAG (Michal Schmidt) [RHEL-21571]
- regmap: Ensure range selector registers are updated after cache sync (Jaroslav Kysela) [RHEL-22735]
- kernel/panic.c: Move the location of bust_spinlocks to prevent hanging. (Derek Barbosa) [RHEL-15897]
- bootconfig: Fix missing return check of xbc_node_compose_key function (Julio Faracco) [2217634]
- new config items (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Make TDX host depend on X86_MCE (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Disable TDX host support when kexec is enabled (Paolo Bonzini) [RHEL-15937]
- Documentation/x86: Add documentation for TDX host support (Paolo Bonzini) [RHEL-15937]
- x86/mce: Differentiate real hardware #MCs from TDX erratum ones (Paolo Bonzini) [RHEL-15937]
- x86/cpu: Detect TDX partial write machine check erratum (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Handle TDX interaction with sleep and hibernation (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Initialize all TDMRs (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Configure global KeyID on all packages (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Configure TDX module with the TDMRs and global KeyID (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Designate reserved areas for all TDMRs (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Allocate and set up PAMTs for TDMRs (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Fill out TDMRs to cover all TDX memory regions (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Get module global metadata for module initialization (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Use all system memory when initializing TDX module as TDX memory (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Add skeleton to enable TDX on demand (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Add SEAMCALL error printing for module initialization (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Handle SEAMCALL no entropy error in common code (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Make INTEL_TDX_HOST depend on X86_X2APIC (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Define TDX supported page sizes as macros (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Detect TDX during kernel boot (Paolo Bonzini) [RHEL-15937]
- x86/mm: Remove "INVPCID single" feature tracking (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP (Paolo Bonzini) [RHEL-15937]
- x86/virt/tdx: Wire up basic SEAMCALL functions (Paolo Bonzini) [RHEL-15937]
- x86/smp: Dont access non-existing CPUID leaf (Paolo Bonzini) [RHEL-15937]
- x86/smp: Make stop_other_cpus() more robust (Paolo Bonzini) [RHEL-15937]
- x86/cpu: Clear SME feature flag when not in use (Paolo Bonzini) [RHEL-15937]
- Documentation, mm/unaccepted: document accept_memory kernel parameter (Paolo Bonzini) [RHEL-15937]
- proc/kcore: do not try to access unaccepted memory (Paolo Bonzini) [RHEL-15937]
- efi/unaccepted: do not let /proc/vmcore try to access unaccepted memory (Paolo Bonzini) [RHEL-15937]
- netfilter: nf_tables: Reject tables of unsupported family (Florian Westphal) [RHEL-21420 RHEL-21421] {CVE-2023-6040}
- video/aperture: Only remove sysfb on the default vga pci device (Jocelyn Falempe) [RHEL-19939]
- video/aperture: Drop primary argument (Jocelyn Falempe) [RHEL-19939]
- video/aperture: Move vga handling to pci function (Jocelyn Falempe) [RHEL-19939]
- video/aperture: Only kick vgacon when the pdev is decoding vga (Jocelyn Falempe) [RHEL-19939]
- video/aperture: use generic code to figure out the vga default device (Jocelyn Falempe) [RHEL-19939]
- fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device() (Jocelyn Falempe) [RHEL-19939]
- fbdev: Fix order of arguments to aperture_remove_conflicting_devices() (Jocelyn Falempe) [RHEL-19939]
- fbdev: Remove conflict-handling code (Jocelyn Falempe) [RHEL-19939]
- fbdev: Acquire framebuffer apertures for firmware devices (Jocelyn Falempe) [RHEL-19939]
- video/aperture: Remove conflicting VGA devices, if any (Jocelyn Falempe) [RHEL-19939]
- video: Provide constants for VGA I/O range (Jocelyn Falempe) [RHEL-19939]
- video/aperture: Disable and unregister sysfb devices via aperture helpers (Jocelyn Falempe) [RHEL-19939]
- fbdev: Remove conflicting devices on PCI bus (Jocelyn Falempe) [RHEL-19939]
- fbdev: Convert drivers to aperture helpers (Jocelyn Falempe) [RHEL-19939]
- fbdev/core: Remove remove_conflicting_pci_framebuffers() (Jocelyn Falempe) [RHEL-19939]
- fbdev: Restart conflicting fb removal loop when unregistering devices (Jocelyn Falempe) [RHEL-19939]
- fbdev: Warn in hot-unplug workaround for framebuffers without device (Jocelyn Falempe) [RHEL-19939]
- Revert "fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb" (Jocelyn Falempe) [RHEL-19939]
- Revert 88b08cfb5e1595acc531fcc95964d4e44f7f2cf7 (Jocelyn Falempe) [RHEL-19939]
Resolves: RHEL-15897, RHEL-15937, RHEL-19939, RHEL-21420, RHEL-21571, RHEL-21837, RHEL-22735, RHEL-6506, rhbz#2217634, RHEL-21421
Signed-off-by: Scott Weaver <scweaver@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 4
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 415
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|