forked from rpms/kernel
6e40b3045b
* Fri May 13 2022 Patrick Talbert <ptalbert@redhat.com> [5.14.0-90.el9] - platform/x86/intel: Fix 'rmmod pmt_telemetry' panic (David Arcari) [2080320] - net: mpls: Fix notifications when deleting a device (Guillaume Nault) [2081758] - nvme-pci: disable namespace identifiers for Qemu controllers (Gopal Tiwari) [2079310] - nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202 (Gopal Tiwari) [2079310] - nvme: add a quirk to disable namespace identifiers (Gopal Tiwari) [2079310] - nvme-multipath: fix hang when disk goes live over reconnect (Gopal Tiwari) [2079310] - nvme-pci: add quirks for Samsung X5 SSDs (Gopal Tiwari) [2079310] - nvme-pci: expose use_threaded_interrupts read-only in sysfs (Gopal Tiwari) [2079310] - selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN (Guillaume Nault) [2081383] - ipv4: Fix route lookups when handling ICMP redirects and PMTU updates (Guillaume Nault) [2081383] - ipv4: fix data races in fib_alias_hw_flags_set (Guillaume Nault) [2081383] - ipv4: remove sparse error in ip_neigh_gw4() (Guillaume Nault) [2081383] - ipv4: tcp: send zero IPID in SYNACK messages (Guillaume Nault) [2081383] - ipv4: raw: lock the socket in raw_bind() (Guillaume Nault) [2081383] - ipv4: update fib_info_cnt under spinlock protection (Guillaume Nault) [2081383] - inet: frags: annotate races around fqdir->dead and fqdir->high_thresh (Guillaume Nault) [2081383] - net: nexthop: fix null pointer dereference when IPv6 is not enabled (Guillaume Nault) [2081383] - net: dcb: disable softirqs in dcbnl_flush_dev() (Xin Long) [2080477] - doc/ip-sysctl: add bc_forwarding (Xin Long) [2080477] - l3mdev: l3mdev_master_upper_ifindex_by_index_rcu should be using netdev_master_upper_dev_get_rcu (Xin Long) [2080477] - net/packet: fix packet_sock xmit return value checking (Xin Long) [2080477] - net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit() (Xin Long) [2080477] - net/packet: fix slab-out-of-bounds access in packet_recvmsg() (Xin Long) [2080477] - net: dcb: flush lingering app table entries for unregistered devices (Xin Long) [2080477] - veth: fix races around rq->rx_notify_masked (Xin Long) [2080477] - net: fix a memleak when uncloning an skb dst and its metadata (Xin Long) [2080477] - net: do not keep the dst cache when uncloning an skb dst and its metadata (Xin Long) [2080477] - af_packet: fix data-race in packet_setsockopt / packet_setsockopt (Xin Long) [2080477] - ipv4: remove sparse error in ip_neigh_gw4() (Xin Long) [2080477] - af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress (Xin Long) [2080477] - veth: Do not record rx queue hint in veth_xmit (Xin Long) [2080477] - veth: ensure skb entering GRO are not cloned. (Xin Long) [2080477] - ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode (Guillaume Nault) [2081047] - ip6_gre: Make o_seqno start from 0 in native mode (Guillaume Nault) [2081047] - ip_gre: Make o_seqno start from 0 in native mode (Guillaume Nault) [2081047] - ip6_gre: Fix skb_under_panic in __gre6_xmit() (Guillaume Nault) [2081047] - ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit() (Guillaume Nault) [2081047] - ipv6_tunnel: Rate limit warning messages (Guillaume Nault) [2081047] - bareudp: use ipv6_mod_enabled to check if IPv6 enabled (Guillaume Nault) [2080891] - tipc: fix the timer expires after interval 100ms (Xin Long) [2080364] - tipc: fix incorrect order of state message data sanity check (Xin Long) [2080364] - tipc: fix kernel panic when enabling bearer (Xin Long) [2080364] - tipc: Fix end of loop tests for list_for_each_entry() (Xin Long) [2080364] - tipc: fix wrong notification node addresses (Xin Long) [2080364] - tipc: fix wrong publisher node address in link publications (Xin Long) [2080364] - tipc: fix a bit overflow in tipc_crypto_key_rcv() (Xin Long) [2080364] - tipc: rate limit warning for received illegal binding update (Xin Long) [2080364] - net: tipc: remove unused static inlines (Xin Long) [2080364] - sctp: Initialize daddr on peeled off socket (Xin Long) [2079979] - sctp: count singleton chunks in assoc user stats (Xin Long) [2079979] - sctp: fix kernel-infoleak for SCTP sockets (Xin Long) [2079979] - scsi: target: Allow changing dbroot if there are no registered devices (Maurizio Lombardi) [2075759] - xfs: check sb_meta_uuid for dabuf buffer recovery (Dave Chinner) [2069776] Resolves: rhbz#2080320, rhbz#2081758, rhbz#2079310, rhbz#2081383, rhbz#2080477, rhbz#2081047, rhbz#2080891, rhbz#2080364, rhbz#2079979, rhbz#2075759, rhbz#2069776 Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 1
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 90
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|