forked from rpms/kernel
671ff051fe
* Thu Jul 14 2022 Patrick Talbert <ptalbert@redhat.com> [5.14.0-129.el9] - fuse: send security context of inode on file (Vivek Goyal) [2101526] - fuse: extend init flags (Vivek Goyal) [2101526] - security, lsm: dentry_init_security() Handle multi LSM registration (Vivek Goyal) [2101526] - security: Return xattr name from security_dentry_init_security() (Vivek Goyal) [2101526] - fuse: add FOPEN_NOFLUSH (Vivek Goyal) [2101526] - net: fix data-race in dev_isalive() (Hangbin Liu) [2101278] - net: Write lock dev_base_lock without disabling bottom halves. (Hangbin Liu) [2101278] - net: fix IFF_TX_SKB_NO_LINEAR definition (Hangbin Liu) [2101278] - sock: redo the psock vs ULP protection check (Hangbin Liu) [2101278] - net: fix dev_fill_forward_path with pppoe + bridge (Hangbin Liu) [2101278] - net: Fix features skip in for_each_netdev_feature() (Hangbin Liu) [2101278] - RDMA/irdma: Add SW mechanism to generate completions on error (Kamal Heib) [2100317] - RDMA/irdma: Remove the redundant variable (Kamal Heib) [2100317] - RDMA/irdma: Add support for DSCP (Kamal Heib) [2100317] - RDMA/irdma: Use irq_update_affinity_hint() (Kamal Heib) [2100317] - RDMA/irdma: Set protocol based on PF rdma_mode flag (Kamal Heib) [2096127 2100317] - spec: Keep .BTF section in modules (Viktor Malik) [2097188] - NFSD: Instantiate a struct file when creating a regular NFSv4 file (Benjamin Coddington) [1905809] - NFSD: Clean up nfsd_open_verified() (Benjamin Coddington) [1905809] - NFSD: Remove do_nfsd_create() (Benjamin Coddington) [1905809] - NFSD: Refactor NFSv4 OPEN(CREATE) (Benjamin Coddington) [1905809] - NFSD: Refactor NFSv3 CREATE (Benjamin Coddington) [1905809] - NFSD: Refactor nfsd_create_setattr() (Benjamin Coddington) [1905809] - NFSD: Avoid calling fh_drop_write() twice in do_nfsd_create() (Benjamin Coddington) [1905809] - NFSD: Clean up nfsd3_proc_create() (Benjamin Coddington) [1905809] - ext4: fix up test_dummy_encryption handling for new mount API (Lukas Czerner) [2099577] - ext4: only allow test_dummy_encryption when supported (Lukas Czerner) [2099577] - fscrypt: add new helper functions for test_dummy_encryption (Lukas Czerner) [2099577] - fscrypt: factor out fscrypt_policy_to_key_spec() (Lukas Czerner) [2099577] - ext4: fix super block checksum incorrect after mount (Lukas Czerner) [2099577] - ext4: fix bug_on ext4_mb_use_inode_pa (Lukas Czerner) [2099577] - ext4: make variable "count" signed (Lukas Czerner) [2099577] - ext4: add reserved GDT blocks check (Lukas Czerner) [2099577] - ext4: fix bug_on in __es_tree_search (Lukas Czerner) [2099577] - ext4: avoid cycles in directory h-tree (Lukas Czerner) [2099577] - ext4: verify dir block before splitting it (Lukas Czerner) [2099577] - ext4: filter out EXT4_FC_REPLAY from on-disk superblock field s_state (Lukas Czerner) [2099577] - ext4: fix bug_on in ext4_writepages (Lukas Czerner) [2099577] - ext4: fix memory leak in parse_apply_sb_mount_options() (Lukas Czerner) [2099577] - ext4: reject the 'commit' option on ext2 filesystems (Lukas Czerner) [2099577] - ext4: fix race condition between ext4_write and ext4_convert_inline_data (Lukas Czerner) [2099577] - ext4: fix journal_ioprio mount option handling (Lukas Czerner) [2099577] - ext4: mark group as trimmed only if it was fully scanned (Lukas Czerner) [2099577] - ext4: fix use-after-free in ext4_rename_dir_prepare (Lukas Czerner) [2099577] - ext4: fix warning in ext4_handle_inode_extension (Lukas Czerner) [2099577] - redhat/configs: enable CONFIG_SAMPLE_VFIO_MDEV_MTTY (Patrick Talbert) [2071955] - Revert "mm: remove the extra ZONE_DEVICE struct page refcount" (Karol Herbst) [2043115] - Merge DRM changes from upstream v5.17..v5.18 (Karol Herbst) [2043115] - seq_file: include linux/string_helpers.h (Karol Herbst) [2043115] - iosys-map: Add a few more helpers (Karol Herbst) [2043115] - iosys-map: Add offset to iosys_map_memcpy_to() (Karol Herbst) [2043115] - dma-buf-map: Rename to iosys-map (Karol Herbst) [2043115] - Revert "virtio: wrap config->reset calls" (Karol Herbst) [2043115] - Merge DRM changes from upstream v5.16..v5.17 (Karol Herbst) [2043115] - drm/i915/rpl-s: Add PCI IDS for Raptor Lake S (Karol Herbst) [2043115] - Merge DRM changes from upstream v5.15..v5.16 (Karol Herbst) [2043115] - Merge DRM changes from upstream v5.14..v5.15 (Karol Herbst) [2043115] - fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb (Karol Herbst) [2043115] - redhat/configs: enable CONFIG_UDMABUF (Karol Herbst) [2012748] - redhat/configs: set new DRM configs (Karol Herbst) [2043115] - Makefiles: set initial DRM version (Karol Herbst) [2043115] Resolves: rhbz#2101526, rhbz#2101278, rhbz#2100317, rhbz#2096127, rhbz#2097188, rhbz#1905809, rhbz#2099577, rhbz#2071955, rhbz#2043115, rhbz#2012748 Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 1
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 129
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|