forked from rpms/kernel
5b3a54b781
* Wed Aug 10 2022 Jan Stancek <jstancek@redhat.com> [5.14.0-145.el9] - KVM: x86: do not report preemption if the steal time cache is stale (Vitaly Kuznetsov) [2115238] - KVM: x86: revalidate steal time cache if MSR value changes (Vitaly Kuznetsov) [2115238] - KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1 (Vitaly Kuznetsov) [2115238] - KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op() (Vitaly Kuznetsov) [2115238] - KVM: SEV: Init target VMCBs in sev_migrate_from (Vitaly Kuznetsov) [2115238] - KVM: SVM: fix tsc scaling cache logic (Vitaly Kuznetsov) [2115238] - KVM: x86/mmu: Check every prev_roots in __kvm_mmu_free_obsolete_roots() (Vitaly Kuznetsov) [2115238] - KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer (Vitaly Kuznetsov) [2115238] - KVM: x86: avoid calling x86 emulator without a decoded instruction (Vitaly Kuznetsov) [2115238] - KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak (Vitaly Kuznetsov) [2115238] - KVM: x86: avoid loading a vCPU after .vm_destroy was called (Vitaly Kuznetsov) [2115238] - KVM: nVMX: Clear IDT vectoring on nested VM-Exit for double/triple fault (Vitaly Kuznetsov) [2115238] - KVM: nVMX: Leave most VM-Exit info fields unmodified on failed VM-Entry (Vitaly Kuznetsov) [2115238] - KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2 (Vitaly Kuznetsov) [2115238] - virtio-ring: fix DMA metadata flags (Cindy Lu) [2000425] - RDMA/cxgb4: Set queue pair state when being queried (Rahul Lakkireddy) [2109523] - RDMA/cxgb4: Use non-atomic bitmap functions when possible (Rahul Lakkireddy) [2109523] - RDMA/cxgb4: Use bitmap_set() when applicable (Rahul Lakkireddy) [2109523] - RDMA/cxgb4: Use bitmap_zalloc() when applicable (Rahul Lakkireddy) [2109523] - RDMA/cxgb4: Use helper function to set GUIDs (Rahul Lakkireddy) [2109523] - cxgb4: Use the bitmap API to allocate bitmaps (Rahul Lakkireddy) [2109520] - cxgb4: Fix typo in string (Rahul Lakkireddy) [2109520] - cxgb4/cxgb4vf: Fix typo in comments (Rahul Lakkireddy) [2109520] - cxgb4vf: remove unexpected word "the" (Rahul Lakkireddy) [2109520] - net: chelsio: cxgb4: Avoid potential negative array offset (Rahul Lakkireddy) [2109520] - libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route() (Rahul Lakkireddy) [2109520] - cxgb4vf: Remove useless DMA-32 fallback configuration (Rahul Lakkireddy) [2109520] - cxgb4: Remove useless DMA-32 fallback configuration (Rahul Lakkireddy) [2109520] - cxgb4: allow reading unrecognized port module eeprom (Rahul Lakkireddy) [2109520] - net: chelsio: cxgb4vf: Fix an error code in cxgb4vf_pci_probe() (Rahul Lakkireddy) [2109520] - cxgb4: Use struct_group() for memcpy() region (Rahul Lakkireddy) [2109520] - cxgb4: fix eeprom len when diagnostics not implemented (Rahul Lakkireddy) [2109520] - ethernet: use eth_hw_addr_set() for dev->addr_len cases (Rahul Lakkireddy) [2109520] - net: chelsio: cxgb4vf: Make use of the helper function dev_err_probe() (Rahul Lakkireddy) [2109520] - cxgb4: improve printing NIC information (Rahul Lakkireddy) [2109520] - net: chelsio: switch from 'pci_' to 'dma_' API (Rahul Lakkireddy) [2109520] - cxgb4: make the array match_all_mac static, makes object smaller (Rahul Lakkireddy) [2109520] - scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown (Tomas Henzl) [2112378] - redhat: nvme/tcp mistakenly uses blk_mq_tag_to_rq(nvme_tcp_tagset(queue)) (John Meneghini) [2112031] - bnxt_en: Fix bnxt_refclk_read() (Ken Cox) [2111502] - bnxt_en: fix livepatch query (Ken Cox) [2111502] - bnxt_en: Fix bnxt_reinit_after_abort() code path (Ken Cox) [2111502] - bnxt_en: reclaim max resources if sriov enable fails (Ken Cox) [2111502] - eth: bnxt: make ulp_id unsigned to make GCC 12 happy (Ken Cox) [2111502] - igc: Reinstate IGC_REMOVED logic and implement it properly (Corinna Vinschen) [2037987] - intel/igc:fix repeated words in comments (Corinna Vinschen) [2037987] - intel: remove unused macros (Corinna Vinschen) [2037987] - igc: Change type of the 'igc_check_downshift' method (Corinna Vinschen) [2037987] - igc: Remove unused phy_type enum (Corinna Vinschen) [2037987] - igc: Remove igc_set_spd_dplx method (Corinna Vinschen) [2037987] - igc: Fix suspending when PTM is active (Corinna Vinschen) [2037987] - igc: Fix BUG: scheduling while atomic (Corinna Vinschen) [2037987] - igc: Fix infinite loop in release_swfw_sync (Corinna Vinschen) [2037987] - igc: igc_write_phy_reg_gpy: drop premature return (Corinna Vinschen) [2037987] - igc: igc_read_phy_reg_gpy: drop premature return (Corinna Vinschen) [2037987] - igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb (Corinna Vinschen) [2037987] - igc: Remove useless DMA-32 fallback configuration (Corinna Vinschen) [2037987] - igc: switch to napi_build_skb() (Corinna Vinschen) [2037987] - igc: Remove obsolete define (Corinna Vinschen) [2037987] - igc: Remove obsolete mask (Corinna Vinschen) [2037987] - igc: Remove obsolete nvm type (Corinna Vinschen) [2037987] - igc: Remove unused phy type (Corinna Vinschen) [2037987] - igc: Remove unused _I_PHY_ID define (Corinna Vinschen) [2037987] Resolves: rhbz#2115238, rhbz#2000425, rhbz#2109523, rhbz#2109520, rhbz#2112378, rhbz#2112031, rhbz#2111502, rhbz#2037987 Signed-off-by: Jan Stancek <jstancek@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 1
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 145
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|