forked from rpms/kernel
15baec6945
* Thu Feb 16 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-275.el9] - cifs: serialize all mount attempts (Ronnie Sahlberg) [2165757] - cifs: fix potential double free during failed mount (Ronnie Sahlberg) [2165755] - EDAC/amd64: Handle three rank interleaving mode (Aristeu Rozanski) [2165633] - memory: tegra: Add DLA clients for Tegra234 (Joel Slebodnick) [2144645] - dt-bindings: tegra: Update headers for Tegra234 (Joel Slebodnick) [2144645] - KVM: x86: smm: preserve interrupt shadow in SMRAM (Maxim Levitsky) [2035694] - KVM: x86: SVM: don't save SVM state to SMRAM when VM is not long mode capable (Maxim Levitsky) [2035694] - KVM: x86: SVM: use smram structs (Maxim Levitsky) [2035694] - KVM: svm: drop explicit return value of kvm_vcpu_map (Maxim Levitsky) [2035694] - KVM: x86: smm: use smram struct for 64 bit smram load/restore (Maxim Levitsky) [2035694] - KVM: x86: smm: use smram struct for 32 bit smram load/restore (Maxim Levitsky) [2035694] - KVM: x86: smm: use smram structs in the common code (Maxim Levitsky) [2035694] - KVM: x86: smm: add structs for KVM's smram layout (Maxim Levitsky) [2035694] - KVM: x86: smm: check for failures on smm entry (Maxim Levitsky) [2035694] - KVM: x86: do not go through ctxt->ops when emulating rsm (Maxim Levitsky) [2035694] - KVM: x86: move SMM exit to a new file (Maxim Levitsky) [2035694] - KVM: x86: move SMM entry to a new file (Maxim Levitsky) [2035694] - KVM: x86: start moving SMM-related functions to new files (Maxim Levitsky) [2035694] - bug: introduce ASSERT_STRUCT_OFFSET (Maxim Levitsky) [2035694] - KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed (Maxim Levitsky) [2035694] - KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format (Maxim Levitsky) [2035694] - KVM: x86: emulator: update the emulation mode after CR0 write (Maxim Levitsky) [2035694] - KVM: x86: emulator: update the emulation mode after rsm (Maxim Levitsky) [2035694] - KVM: x86: emulator: introduce emulator_recalc_and_set_mode (Maxim Levitsky) [2035694] - KVM: x86: emulator: em_sysexit should update ctxt->mode (Maxim Levitsky) [2035694] - tty: serial: qcom_geni: avoid duplicate struct member init (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Add support for Hibernation feature (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Replace hardcoded icc flags with macros. (Alessandro Carminati) [2162957] - serial: Make ->set_termios() old ktermios const (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Fix %%lu -> %%u in print statements (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Implement start_rx callback (Alessandro Carminati) [2162957] - serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present. (Alessandro Carminati) [2162957] - serial: qcom_geni_serial: Disable MMIO tracing for geni serial (Alessandro Carminati) [2162957] - tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. (Alessandro Carminati) [2162957] - serial: core: Do stop_rx in suspend path for console if console_suspend is disabled (Alessandro Carminati) [2162957] - serial: qcom: use check for empty instead of pending (Alessandro Carminati) [2162957] - serial: make uart_console_write->putchar()'s character an unsigned char (Alessandro Carminati) [2162957] - PCI: qcom-ep: Setup PHY to work in EP mode (Shawn Doherty) [2164511] - PCI: qcom: Setup PHY to work in RC mode (Shawn Doherty) [2164511] - PCI: qcom: Fix error message for reset_control_assert() (Shawn Doherty) [2164511] - PCI: qcom: Add basic interconnect support (Shawn Doherty) [2164511] - dt-bindings: PCI: qcom: Allow 'dma-coherent' property (Shawn Doherty) [2164511] - dt-bindings: PCI: qcom: Add SC8280XP/SA8540P interconnects (Shawn Doherty) [2164511] - ASoC: tegra: Add binding doc for OPE module (Joel Slebodnick) [2122417] - ASoC: tegra: Add binding doc for ASRC module (Joel Slebodnick) [2122417] - ASoC: Document Tegra234 APE support (Joel Slebodnick) [2122417] - ASoC: dt-bindings: tegra: Few more Tegra210 AHUB modules (Joel Slebodnick) [2122417] Resolves: rhbz#2165757, rhbz#2165755, rhbz#2165633, rhbz#2144645, rhbz#2035694, rhbz#2162957, rhbz#2164511, rhbz#2122417 Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 2
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 275
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|