Commit Graph

1505 Commits

Author SHA1 Message Date
Colin Walters
f9306a0334 cloud-atomic: Bring sanity to the remote setup
We were doing gyrations here between the "installmedia" remote and the
intended "fedora-atomic" remote.  Thinking about this, it's *far*
simpler if we pretend installmedia is the target remote.

We still need to delete the remote configuration Anaconda added and
re-add it with the real target URL.
2014-11-17 15:58:45 -05:00
Colin Walters
16fb17d455 cloud-atomic: Trim installmedia remote
Otherwise it takes up space until manually removed.
2014-11-17 15:14:56 -05:00
Amit Saha
7a7d16bc5c scientific: add python3-sympy 2014-11-16 09:05:18 +10:00
Amit Saha
f56faabf5a Scientific: Add couple of new tools
Adds IDLE and pandas for both Python 2 and 3.
2014-11-16 08:32:58 +10:00
Matthew Miller
ddb2862b52 make the cloud base lang hacks line up with the same filenames as in the docker image 2014-11-14 10:19:21 -05:00
Matthew Miller
f3e0beb135 more hacks for en_US in cloud base image 2014-11-13 14:10:18 -05:00
Rex Dieter
12762c7a2d kde: support modifying existing /etc/sddm.conf 2014-11-13 12:40:10 -06:00
raveit65
dd76377ad0 Mate: add more packages 2014-11-13 17:51:20 +01:00
Colin Walters
423db5a738 cloud-atomic: Switch to dl.fedoraproject.org
We don't have a mirrorlist yet.
2014-11-12 12:17:32 -05:00
raveit65
93afb3345a add more packages, no sense to reduce size if CJK font packages are so big 2014-11-12 14:09:26 +01:00
raveit65
f164fefa7a add adobe-source-han-* fonts again 2014-11-12 12:02:09 +01:00
Luya Tshimbalanga
81d2f86266 design-suite: remove legacy comments 2014-11-11 20:31:07 -08:00
Matthew Miller
f8b2d154d6 Revert "builds failed last night with "an additional 861.02 MiB is needed""
This wasn't the problem. :)

This reverts commit 4f2df51206.
2014-11-11 18:54:05 -05:00
Matthew Miller
4f2df51206 builds failed last night with "an additional 861.02 MiB is needed" 2014-11-11 11:06:49 -05:00
raveit65
fb107cf740 add missing CJK fonts and localization 2014-11-11 17:04:21 +01:00
Matthew Miller
35d07d9bcf Revert "remove heat-cfntools from cloud image until python3 / boto issue can be resolved"
In anticipation of https://admin.fedoraproject.org/updates/FEDORA-2014-14606/python-boto-2.34.0-4.fc21
being tested and pushed to stable soon

This reverts commit 365e62a37e.
2014-11-10 17:19:58 -05:00
Colin Walters
377cf487ed cloud-atomic: Forcibly power off after %post to work around bug
The system loops with:

mkdir: cannot create directory '/oldsys': Read-only filesystem
mkdir: cannot create directory '/oldsys/sys': Read-only filesystem
mount: mount point /oldsys/sys does not exist
...
drauct Warning: Killing all remaining processes
...

--- begin loop ---
Unable to unlink device node for atomicos-root
Unable to unlink device node for live-base
rm: cannot remove /lib/drauct/hooks/shutdown/30-dm-shutdown.sh: Read-only filesystem
rm: cannot remove /lib/drauct/hooks/shutdown/30-md-shutdown.sh: Read-only filesystem
--- end loop ---

Not entirely sure what's at fault here, but this is a quick hack to
get an image building.
2014-11-10 14:22:51 -05:00
Colin Walters
09243c9986 cloud-atomic: Re-shrink rootfs partitions
mattdm changed these previously because we hit an ENOSPC error during
qcow2 image creation, but that *really* happened because the Fedora
rel-eng create-cloud-images script hardcoded 3GB.

Now that we've shrunk the content down to ~850MB, drop the defaults:

- rootfs down to 2GB.  This is enough space for a replacement of
  all content, plus a bit of spare room for logging
- /boot to 200MB.  At present, kernel+initramfs is just 30MB,
  so this is still very conservative.
2014-11-10 09:42:00 -05:00
Colin Walters
e46c512867 cloud-atomic: Drop SELinux relabeling
This should not be necessary; we have policy loaded from the Anaconda
environment.
2014-11-10 09:42:00 -05:00
Colin Walters
0ba1d1dbc6 atomic: Rewrite origin to point to metalink
Basically Anaconda-in-ImageFactory is set up to pull from the
builder, so that's what ends up in the origin file.  But that's
obviously not what we want to ship to users.

ostree/rpm-ostree do not yet have a convenient command to change this,
so brute force it with sed.

Implements https://lists.fedoraproject.org/pipermail/cloud/2014-November/004570.html
2014-11-10 09:42:00 -05:00
Matthew Miller
66f3423525 hack around instLangs not working (due to https://bugzilla.redhat.com/show_bug.cgi?id=1051816) 2014-11-09 11:09:19 -05:00
Matthew Miller
365e62a37e remove heat-cfntools from cloud image until python3 / boto issue can be resolved 2014-11-09 11:06:15 -05:00
Matthew Miller
4971745782 cloud images -- leave persistant journal, since upcoming cloud-init no longer pulls in rsyslog 2014-11-07 21:55:36 -05:00
Matthew Miller
2a0fdd5241 nightly builds failing due to size.
enlarge so it works, and then we'll figure it out

see http://koji.fedoraproject.org/koji/taskinfo?taskID=8054050 (check the screenshot)
2014-11-06 23:08:20 -05:00
Colin Walters
fbeec77bd5 atomic: We do not support pv-grub
Atomic is HVM only, since OSTree doesn't understand grub1 at the
moment, and incentive to have it do so is low.
2014-11-06 22:40:39 -05:00
Colin Walters
b69402e4b4 atomic: Drop package deinstallation
This isn't supported; at the moment the tree has authconfig and
linux-firmware, but not firewalld.
2014-11-06 22:40:34 -05:00
Colin Walters
13cc8ee768 atomic: Switch /boot to ext4
For some reason Anaconda in Fedora rejects XFS as /boot, even though
that's what RHEL defaults to.
2014-11-05 12:39:31 -05:00
Colin Walters
4bc31dd88e cloud-atomic: Drop yum/rpm bits from %post
While it makes sense to import the GPG key, it has to be done
as part of the treecompose, because it'll drop out of the rpmdb
on the next upgrade.

For yum, it was run as part of the treecompose, not Anaconda, so
there's already no history.
2014-11-05 11:43:18 -05:00
Colin Walters
11c22f0c8d cloud-atomic: Use LVM by default in combination with docker-storage-setup
This will allow flexible expansion of direct Docker LVM.
2014-11-05 11:43:13 -05:00
Adam Williamson
1dddaeebc4 ...and fix SDDM one more time: correct name of Plasma session 2014-10-28 11:41:38 -07:00
Adam Williamson
73543397cf fix SDDM config write to not use 'EOF'
It's nested in another cat << EOF, so can't use the same string.
2014-10-28 11:41:38 -07:00
Adam Williamson
ab93ba68cb update autologin conf for SDDM changes (from mbriza, #1149610) 2014-10-28 11:41:38 -07:00
Rex Dieter
bf576a02b1 kde-live-kde: rely on @kde-office, @kde-education groups
instead of listing individual packages
2014-10-25 14:23:59 -05:00
Rex Dieter
48ac6d329a kde-livecd: rely on @kde-office, @kde-education groups 2014-10-25 14:21:15 -05:00
raveit65
9842b6ce72 Merge branch 'f21' of ssh://git.fedorahosted.org/git/spin-kickstarts into f21 2014-10-25 00:48:02 +02:00
raveit65
bd2c3cd565 mate-live: reduce size again 2014-10-25 00:47:33 +02:00
raveit65
783c32d6fa mate live: some more drops for size 2014-10-24 17:12:40 +02:00
Kalev Lember
be9216200b l10n: Adapt for Desktop -> Workstation rename
Rename the l10n kickstarts to match the Workstation kickstart file name
and update includes.
2014-10-24 16:32:15 +02:00
Adam Williamson
35d3a0f008 also put fedora-release-nonproduct in fedora-arm-base.ks
to fix the generic problem for Beta
2014-10-23 10:15:13 -07:00
Kevin Kofler
1c7da1d744 fedora-livecd-kde.ks: update size target in the header comment
It was increased from 1 GB to 1.4 GB (MiniDVD) by a KDE SIG vote.
2014-10-19 04:38:04 +02:00
Kevin Kofler
537415a58c fedora-livecd-kde.ks: remove obsolete nhn-nanum-gothic-fonts blacklist
comps now only references the new naver-nanum-gothic-fonts name, so we
need to blacklist only that one.
2014-10-19 04:35:05 +02:00
Kalev Lember
f50ad757d3 Revert "workstation: Pull in all of workstation-product-environment"
Turns out the @^ construction for pulling in comps environment groups
doesn't work in kickstart, for reasons unknown.

This reverts commit 6c3c08f442.
2014-10-18 23:02:40 +02:00
Kalev Lember
b9dc5f25e9 live base: Install fedora-release-nonproduct for non-product lives
Add fedora-release-nonproduct to fedora-live-base.ks to ensure it gets
pulled in for all spins. In order to avoid it getting pulled in to
the Workstation product that is also based on fedora-live-base.ks,
explicitly exclude fedora-release-nonproduct in workstation kickstart
file.

https://bugzilla.redhat.com/show_bug.cgi?id=1154235
2014-10-18 15:37:15 +02:00
Kalev Lember
6c3c08f442 workstation: Pull in all of workstation-product-environment
... instead of listing individual groups manually in the kickstart file.
2014-10-18 15:21:38 +02:00
Peter Robinson
7f12fba617 SOAS: update from gconf to gsettings 2014-10-17 17:32:26 +01:00
Peter Robinson
ac6ae65e82 ARM minimal: ensure we get fedora-release 2014-10-17 17:23:50 +01:00
Matthew Miller
5f29e730a3 updated dd extlinux mbr during post as temporary workaround for bug #1147998 2014-10-15 09:24:48 -04:00
Bruno Wolff III
d034bb6c58 Revert "design: add LuxRender and YaraRay plugin for Blender"
This reverts commit 6e96869ce3, reversing
changes made to 9142cc25d5.
2014-10-15 06:28:50 -05:00
Bruno Wolff III
de82df00d2 Revert "dd extlinux mbr during post as temporary workaround for bug #1147998"
This reverts commit 58b06553fa.

We need to go back to the broken merge.
2014-10-15 06:26:48 -05:00
Bruno Wolff III
7517d88f12 Revert "Dropping bigdata cloud spin from f21"
This reverts commit 1d4a252ed6.

We need to go back to the broken merge.
2014-10-15 06:26:10 -05:00