forked from rpms/kernel
c69d78177c
* Fri Nov 24 2023 Jan Stancek <jstancek@redhat.com> [5.14.0-390.el9] - ext4: fix racy may inline data check in dio write (Brian Foster) [RHEL-15106] - scsi: lpfc: Do not abuse UUID APIs and LPFC_COMPRESS_VMID_SIZE (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Copyright updates for 14.2.0.14 patches (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Update lpfc version to 14.2.0.14 (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Clean up SLI-4 sysfs resource reporting (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Abort outstanding ELS cmds when mailbox timeout error is detected (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Remove extra ndlp kref decrement in FLOGI cmpl for loop topology (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Simplify fcp_abort transport callback log message (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Pull out fw diagnostic dump log message from driver's trace buffer (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Fix a possible data race in lpfc_unregister_fcf_rescan() (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Fix lpfc_name struct packing (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Fix incorrect big endian type assignment in bsg loopback path (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Use struct_size() helper (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Fix incorrect big endian type assignments in FDMI and VMID paths (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Copyright updates for 14.2.0.13 patches (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Update lpfc version to 14.2.0.13 (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Enhance congestion statistics collection (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Clean up SLI-4 CQE status handling (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Change firmware upgrade logging to KERN_NOTICE instead of TRACE_EVENT (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Revise NPIV ELS unsol rcv cmpl logic to drop ndlp based on nlp_state (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Replace all non-returning strlcpy() with strscpy() (Dick Kennedy) [RHEL-5393] - scsi: lpfc: Replace one-element array with flexible-array member (Dick Kennedy) [RHEL-5393] - gfs2: Fix another freeze/thaw hang (Andrew Price) [RHEL-5339] - bpf: Change syscall_nr type to int in struct syscall_tp_t (Artem Savkov) [RHEL-348] - net: openvswitch: Use struct_size() (Antoine Tenart) [RHEL-14346] - openvswitch: reduce stack usage in do_execute_actions (Antoine Tenart) [RHEL-14346] - net: openvswitch: reject negative ifindex (Antoine Tenart) [RHEL-14346] - net: openvswitch: Use struct_size() (Antoine Tenart) [RHEL-14346] - nvme-auth: use chap->s2 to indicate bidirectional authentication (Chris Leech) [RHEL-4103] - tcp_bpf: properly release resources on error paths (Paolo Abeni) [RHEL-12593] - tcp: allow again tcp_disconnect() when threads are waiting (Paolo Abeni) [RHEL-12593] - selftests: tls: swap the TX and RX sockets in some tests (Hangbin Liu) [RHEL-13968] - selftests: vrf_route_leaking: remove ipv6_ping_frag from default testing (Hangbin Liu) [RHEL-13968] - selftests: mirror_gre_changes: Tighten up the TTL test match (Hangbin Liu) [RHEL-13968] - selftests: forwarding: bridge_mdb: Make test more robust (Hangbin Liu) [RHEL-13968] - selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet (Hangbin Liu) [RHEL-13968] - selftests: forwarding: bridge_mdb: Fix failing test with old libnet (Hangbin Liu) [RHEL-13968] - selftests: forwarding: tc_tunnel_key: Make filters more specific (Hangbin Liu) [RHEL-13968] - selftests: forwarding: tc_flower: Relax success criterion (Hangbin Liu) [RHEL-13968] - selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairs (Hangbin Liu) [RHEL-13968] - selftests: forwarding: ethtool_extended_state: Skip when using veth pairs (Hangbin Liu) [RHEL-13968] - selftests: forwarding: ethtool: Skip when using veth pairs (Hangbin Liu) [RHEL-13968] - selftests: forwarding: Add a helper to skip test when using veth pairs (Hangbin Liu) [RHEL-13968] - selftests: forwarding: Set default IPv6 traceroute utility (Hangbin Liu) [RHEL-13968] - selftests: forwarding: bridge_mdb_max: Check iproute2 version (Hangbin Liu) [RHEL-13968] - selftests: forwarding: bridge_mdb: Check iproute2 version (Hangbin Liu) [RHEL-13968] - selftests: forwarding: Switch off timeout (Hangbin Liu) [RHEL-13968] - selftests: forwarding: Skip test when no interfaces are specified (Hangbin Liu) [RHEL-13968] - selftests: forwarding: Fix race condition in mirror installation (Hangbin Liu) [RHEL-13968] - selftests/harness: allow tests to be skipped during setup (Hangbin Liu) [RHEL-13968] Resolves: RHEL-12593, RHEL-13968, RHEL-14346, RHEL-15106, RHEL-348, RHEL-4103, RHEL-5339, RHEL-5393 Signed-off-by: Jan Stancek <jstancek@redhat.com>
68 lines
2.3 KiB
Makefile
68 lines
2.3 KiB
Makefile
RHEL_MAJOR = 9
|
|
RHEL_MINOR = 4
|
|
|
|
#
|
|
# RHEL_RELEASE
|
|
# -------------
|
|
#
|
|
# Represents build number in 'release' part of RPM's name-version-release.
|
|
# name is <package_name>, e.g. kernel
|
|
# version is upstream kernel version this kernel is based on, e.g. 4.18.0
|
|
# release is <RHEL_RELEASE>.<dist_tag>[<buildid>], e.g. 100.el8
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
RHEL_RELEASE = 390
|
|
|
|
#
|
|
# ZSTREAM
|
|
# -------
|
|
#
|
|
# This variable controls whether we use zstream numbering or not for the
|
|
# package release. The zstream release keeps the build number of the last
|
|
# build done for ystream for the Beta milestone, and increments a second
|
|
# number for each build. The third number is used for branched builds
|
|
# (eg.: for builds with security fixes or hot fixes done outside of the
|
|
# batch release process).
|
|
#
|
|
# For example, with ZSTREAM unset or set to "no", all builds will contain
|
|
# a release with only the build number, eg.: kernel-<kernel version>-X.el*,
|
|
# where X is the build number. With ZSTREAM set to "yes", we will have
|
|
# builds with kernel-<kernel version>-X.Y.Z.el*, where X is the last
|
|
# RHEL_RELEASE number before ZSTREAM flag was set to yes, Y will now be the
|
|
# build number and Z will always be 1 except if you're doing a branched build
|
|
# (when you give RHDISTGIT_BRANCH on the command line, in which case the Z
|
|
# number will be incremented instead of the Y).
|
|
#
|
|
ZSTREAM ?= no
|
|
|
|
#
|
|
# Early y+1 numbering
|
|
# --------------------
|
|
#
|
|
# In early y+1 process, RHEL_RELEASE consists of 2 numbers: x.y
|
|
# First is RHEL_RELEASE inherited/merged from y as-is, second number
|
|
# is incremented with each build starting from 1. After merge from y,
|
|
# it resets back to 1. This way y+1 nvr reflects status of last merge.
|
|
#
|
|
# Example:
|
|
#
|
|
# rhel8.0 rhel-8.1
|
|
# kernel-4.18.0-58.el8 --> kernel-4.18.0-58.1.el8
|
|
# kernel-4.18.0-58.2.el8
|
|
# kernel-4.18.0-59.el8 kernel-4.18.0-59.1.el8
|
|
# kernel-4.18.0-60.el8
|
|
# kernel-4.18.0-61.el8 --> kernel-4.18.0-61.1.el8
|
|
#
|
|
#
|
|
# Use this spot to avoid future merge conflicts.
|
|
# Do not trim this comment.
|
|
EARLY_YSTREAM ?= no
|
|
EARLY_YBUILD:=
|
|
EARLY_YRELEASE:=
|
|
ifneq ("$(ZSTREAM)", "yes")
|
|
ifeq ("$(EARLY_YSTREAM)","yes")
|
|
RHEL_RELEASE:=$(RHEL_RELEASE).$(EARLY_YRELEASE)
|
|
endif
|
|
endif
|