forked from rpms/kernel
The Linux kernel
bc985ce581
* Thu Feb 02 2023 Herton R. Krzesinski <herton@redhat.com> [5.14.0-255.el9]
- can: kvaser_usb: kvaser_usb_set_bittiming(): fix redundant initialization warning for err (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_set_{,data}bittiming(): remove empty lines in variable declaration (Al Stone) [2071839]
- can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet (Al Stone) [2071839]
- can: can327: flush TX_work on ldisc .close() (Al Stone) [2071839]
- can: slcan: fix freed work crash (Al Stone) [2071839]
- can: can327: can327_feed_frame_to_netdev(): fix potential skb leak when netdev is down (Al Stone) [2071839]
- can: dev: fix skb drop check (Al Stone) [2071839]
- can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming (Al Stone) [2071839]
- can: kvaser_usb: Add struct kvaser_usb_busparams (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix bogus restart events (Al Stone) [2071839]
- can: kvaser_usb_leaf: Ignore stale bus-off after start (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix wrong CAN state after stopping (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix improved state not being reported (Al Stone) [2071839]
- can: kvaser_usb_leaf: Set Warning state even without bus errors (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENT (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device (Al Stone) [2071839]
- can: remove obsolete PCH CAN driver (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix CAN state after restart (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix TX queue out of sync after restart (Al Stone) [2071839]
- can: kvaser_usb: Fix use of uninitialized completion (Al Stone) [2071839]
- can: kvaser_usb_leaf: Fix overread with an invalid command (Al Stone) [2071839]
- can: gs_usb: gs_can_open(): initialize time counter before starting device (Al Stone) [2071839]
- can: gs_usb: add missing lock to protect struct timecounter::cycle_last (Al Stone) [2071839]
- can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv() (Al Stone) [2071839]
- can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported (Al Stone) [2071839]
- can: gs_usb: gs_can_open(): fix race dev->can.state condition (Al Stone) [2071839]
- can: canxl: update CAN infrastructure for CAN XL frames (Al Stone) [2071839]
- can: dev: add CAN XL support to virtual CAN (Al Stone) [2071839]
- can: canxl: introduce CAN XL data structure (Al Stone) [2071839]
- can: skb: add skb CAN frame data length helpers (Al Stone) [2071839]
- can: set CANFD_FDF flag in all CAN FD frame structures (Al Stone) [2071839]
- can: skb: unify skb CAN frame identification helpers (Al Stone) [2071839]
- can: gs_usb: add RX and TX hardware timestamp support (Al Stone) [2071839]
- rhel: Set initial defaults for CAN configs (Al Stone) [2071839]
- can: rcar_canfd: Add missing ECC error checks for channels 2-7 (Al Stone) [2071839]
- can: gs_usb: use common spelling of GS_USB in macros (Al Stone) [2071839]
- can: flexcan: fix typo: FLEXCAN_QUIRK_SUPPPORT_* -> FLEXCAN_QUIRK_SUPPORT_* (Al Stone) [2071839]
- can: rcar_canfd: fix channel specific IRQ handling for (Al Stone) [2071839]
- can: c_can: don't cache TX messages for C_CAN cores (Al Stone) [2071839]
- can: flexcan: flexcan_mailbox_read() fix return value for drop = true (Al Stone) [2071839]
- can: mcp251x: Fix race condition on receive interrupt (Al Stone) [2071839]
- can: ems_usb: fix clang's -Wunaligned-access warning (Al Stone) [2071839]
- can: can327: fix a broken link to Documentation (Al Stone) [2071839]
- can: etas_es58x: remove useless calls to usb_fill_bulk_urb() (Al Stone) [2071839]
- can: peak_usb: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: peak_canfd: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: kvaser_usb: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: kvaser_pciefd: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: etas_es58x: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: mcp251xfd: advertise timestamping capabilities and add ioctl support (Al Stone) [2071839]
- can: dev: add generic function can_eth_ioctl_hwts() (Al Stone) [2071839]
- can: dev: add generic function can_ethtool_op_get_ts_info_hwts() (Al Stone) [2071839]
- can: dev: add hardware TX timestamp (Al Stone) [2071839]
- can: tree-wide: advertise software timestamping capabilities (Al Stone) [2071839]
- can: v(x)can: add software tx timestamps (Al Stone) [2071839]
- can: slcan: add software tx timestamps (Al Stone) [2071839]
- can: janz-ican3: add software tx timestamp (Al Stone) [2071839]
- can: can327: add software tx timestamps (Al Stone) [2071839]
- MAINTAINERS: Add maintainer for the slcan driver (Al Stone) [2071839]
- can: slcan: add support for listen-only mode (Al Stone) [2071839]
- can: slcan: use the generic can_change_mtu() (Al Stone) [2071839]
- can: slcan: change every `slc' occurrence in `slcan' (Al Stone) [2071839]
- can: slcan: remove legacy infrastructure (Al Stone) [2071839]
- can: slcan: remove useless header inclusions (Al Stone) [2071839]
- can: slcan: use KBUILD_MODNAME and define pr_fmt to replace hardcoded names (Al Stone) [2071839]
- can: flexcan: export flexcan_ethtool_ops and remove flexcan_set_ethtool_ops() (Al Stone) [2071839]
- can: c_can: export c_can_ethtool_ops and remove c_can_set_ethtool_ops() (Al Stone) [2071839]
- can: slcan: export slcan_ethtool_ops and remove slcan_set_ethtool_ops() (Al Stone) [2071839]
- can: etas_es58x: remove DRV_VERSION (Al Stone) [2071839]
- can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAME (Al Stone) [2071839]
- can: ubs_8dev: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: kvaser_usb: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: gs_ubs: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: esd_usb: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: softing: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: ems_usb: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: can327: use KBUILD_MODNAME instead of hard coded names (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_dump(): fix comment (Al Stone) [2071839]
- can: pch_can: pch_can_error(): initialize errc before using it (Al Stone) [2071839]
- can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe() (Al Stone) [2071839]
- can: mcp251xfd: fix detection of mcp251863 (Al Stone) [2071839]
- can: add CAN_ERR_CNT flag to notify availability of error counter (Al Stone) [2071839]
- can: usb_8dev: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: sun4i_can: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: hi311x: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: slcan: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: sja1000: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: rcar_can: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: pch_can: do not report txerr and rxerr during bus-off (Al Stone) [2071839]
- can: peak_usb: include support for a new MCU (Al Stone) [2071839]
- can: peak_usb: correction of an initially misnamed field name (Al Stone) [2071839]
- can: peak_usb: pcan_dump_mem(): mark input prompt and data pointer as const (Al Stone) [2071839]
- can: ctucanfd: Update CTU CAN FD IP core registers to match version 3.x. (Al Stone) [2071839]
- can: c_can: remove wrong comment (Al Stone) [2071839]
- can: slcan: do not sleep with a spin lock held (Al Stone) [2071839]
- can: sja1000: Change the return type as void for SoC specific init (Al Stone) [2071839]
- can: sja1000: Use device_get_match_data to get device data (Al Stone) [2071839]
- can: sja1000: Add Quirk for RZ/N1 SJA1000 CAN controller (Al Stone) [2071839]
- can: slcan: clean up if/else (Al Stone) [2071839]
- can: slcan: convert comparison to NULL into !val (Al Stone) [2071839]
- can: slcan: fix whitespace issues (Al Stone) [2071839]
- can: slcan: slcan_init() convert printk(LEVEL ...) to pr_level() (Al Stone) [2071839]
- can: slcan: convert comments to network style comments (Al Stone) [2071839]
- can: slcan: use scnprintf() as a hardening measure (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression (Al Stone) [2071839]
- can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info (Al Stone) [2071839]
- can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits (Al Stone) [2071839]
- can: m_can: m_can_chip_config(): actually enable internal timestamping (Al Stone) [2071839]
- can: grcan: grcan_probe(): remove extra of_node_get() (Al Stone) [2071839]
- can: gs_usb: gs_usb_open/close(): fix memory leak (Al Stone) [2071839]
- can: rcar_canfd: Fix data transmission failed on R-Car V3U (Al Stone) [2071839]
- Revert "can: xilinx_can: Limit CANFD brp to 2" (Al Stone) [2071839]
- can: slcan: extend the protocol with CAN state info (Al Stone) [2071839]
- can: slcan: extend the protocol with error info (Al Stone) [2071839]
- can: slcan: add ethtool support to reset adapter errors (Al Stone) [2071839]
- can: slcan: move driver into separate sub directory (Al Stone) [2071839]
- can: slcan: send the open/close commands to the adapter (Al Stone) [2071839]
- can: slcan: set bitrate by CAN device driver API (Al Stone) [2071839]
- can: slcan: allow to send commands to the adapter (Al Stone) [2071839]
- can: slcan: use CAN network device driver API (Al Stone) [2071839]
- can: netlink: dump bitrate 0 if can_priv::bittiming.bitrate is -1U (Al Stone) [2071839]
- can: slcan: use the alloc_can_skb() helper (Al Stone) [2071839]
- can: slcan: use netdev helpers to print out messages (Al Stone) [2071839]
- can: slcan: use the BIT() helper (Al Stone) [2071839]
- can: ctucanfd: ctucan_interrupt(): fix typo (Al Stone) [2071839]
- can: can327: CAN/ldisc driver for ELM327 based OBD-II adapters (Al Stone) [2071839]
- docs: networking: device drivers: can: add ctucanfd to index (Al Stone) [2071839]
- docs: networking: device drivers: can: add flexcan (Al Stone) [2071839]
- docs: networking: device drivers: add can sub-folder (Al Stone) [2071839]
- can/esd_usb: Update to copyright, M_AUTHOR and M_DESCRIPTION (Al Stone) [2071839]
- can/esd_usb: Fixed some checkpatch.pl warnings (Al Stone) [2071839]
- can/esd_usb: Rename all terms USB2 to USB (Al Stone) [2071839]
- can/esd_usb2: Rename esd_usb2.c to esd_usb.c (Al Stone) [2071839]
- powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode (Al Stone) [2071839]
- can: netlink: allow configuring of fixed data bit rates without need for do_set_data_bittiming callback (Al Stone) [2071839]
- can: etas_es58x: fix signedness of USB RX and TX pipes (Al Stone) [2071839]
- can: etas_es58x: replace es58x_device::rx_max_packet_size by usb_maxpacket() (Al Stone) [2071839]
- can: skb: drop tx skb if in listen only mode (Al Stone) [2071839]
- can: skb: move can_dropped_invalid_skb() and can_skb_headroom_valid() to skb.c (Al Stone) [2071839]
- net: Kconfig: move the CAN device menu to the "Device Drivers" section (Al Stone) [2071839]
- can: Kconfig: add CONFIG_CAN_RX_OFFLOAD (Al Stone) [2071839]
- can: bittiming: move bittiming calculation functions to calc_bittiming.c (Al Stone) [2071839]
- can: Kconfig: turn menu "CAN Device Drivers" into a menuconfig using CAN_DEV (Al Stone) [2071839]
- can: Kconfig: rename config symbol CAN_DEV into CAN_NETLINK (Al Stone) [2071839]
- can: netlink: allow configuring of fixed bit rates without need for do_set_bittiming callback (Al Stone) [2071839]
- can: m_can: fix typo prescalar -> prescaler (Al Stone) [2071839]
- can: xilinx_can: fix typo prescalar -> prescaler (Al Stone) [2071839]
- can: xilinx_can: add Transmitter Delay Compensation (TDC) feature support (Al Stone) [2071839]
- can: ctucanfd: platform: add missing dependency to HAS_IOMEM (Al Stone) [2071839]
- can: kvaser_usb: silence a GCC 12 -Warray-bounds warning (Al Stone) [2071839]
- can: peak_usb: fix typo in comment (Al Stone) [2071839]
- can: mcp251xfd: silence clang's -Wunaligned-access warning (Al Stone) [2071839]
- can: can-dev: remove obsolete CAN LED support (Al Stone) [2071839]
- can: do not increase tx_bytes statistics for RTR frames (Al Stone) [2071839]
- can: do not increase rx_bytes statistics for RTR frames (Al Stone) [2071839]
- can: do not increase rx statistics when generating a CAN rx error message frame (Al Stone) [2071839]
- can: dev: reorder struct can_priv members for better packing (Al Stone) [2071839]
- can: can-dev: move to netif_napi_add_weight() (Al Stone) [2071839]
- can: slcan: slc_xmit(): use can_dropped_invalid_skb() instead of manual check (Al Stone) [2071839]
- can: ctucanfd: Let users select instead of depend on CAN_CTUCANFD (Al Stone) [2071839]
- can: m_can: remove support for custom bit timing, take #2 (Al Stone) [2071839]
- Revert "can: m_can: pci: use custom bit timings for Elkhart Lake" (Al Stone) [2071839]
- can: ctucanfd: remove PCI module debug parameters (Al Stone) [2071839]
- can: ctucanfd: remove debug statements (Al Stone) [2071839]
- can: ctucanfd: remove inline keyword from local static functions (Al Stone) [2071839]
- can: ctucanfd: ctucan_platform_probe(): remove unnecessary print function dev_err() (Al Stone) [2071839]
- can: ctucanfd: remove unused including <linux/version.h> (Al Stone) [2071839]
- can: grcan: only use the NAPI poll budget for RX (Al Stone) [2071839]
- can: grcan: grcan_probe(): fix broken system id check for errata workaround needs (Al Stone) [2071839]
- can: grcan: use ofdev->dev when allocating DMA memory (Al Stone) [2071839]
- can: grcan: grcan_close(): fix deadlock (Al Stone) [2071839]
- can: ctucanfd: CTU CAN FD open-source IP core - platform/SoC support. (Al Stone) [2071839]
- can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support. (Al Stone) [2071839]
- can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part. (Al Stone) [2071839]
- can: mcp251xfd: add support for mcp251863 (Al Stone) [2071839]
- can: xilinx_can: mark bit timing constants as const (Al Stone) [2071839]
- can: flexcan: using pm_runtime_resume_and_get instead of pm_runtime_get_sync (Al Stone) [2071839]
- can: mscan: mpc5xxx_can: Prepare cleanup of powerpc's asm/prom.h (Al Stone) [2071839]
- can: Fix Links to Technologic Systems web resources (Al Stone) [2071839]
- can: bittiming: can_calc_bittiming(): prefer small bit rate pre-scalers over larger ones (Al Stone) [2071839]
- can: rx-offload: rename can_rx_offload_queue_sorted() -> can_rx_offload_queue_timestamp() (Al Stone) [2071839]
- can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration (Al Stone) [2071839]
- can: mcba_usb: properly check endpoint type (Al Stone) [2071839]
- can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path (Al Stone) [2071839]
- can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path (Al Stone) [2071839]
- can: m_can: m_can_tx_handler(): fix use after free of skb (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value (Al Stone) [2071839]
- can: ucan: fix typos in comments (Al Stone) [2071839]
- can: mcp251xfd: ring: increase number of RX-FIFOs to 3 and increase max TX-FIFO depth to 16 (Al Stone) [2071839]
- can: mcp251xfd: add TX IRQ coalescing ethtool support (Al Stone) [2071839]
- can: mcp251xfd: add TX IRQ coalescing support (Al Stone) [2071839]
- can: mcp251xfd: add RX IRQ coalescing ethtool support (Al Stone) [2071839]
- can: mcp251xfd: add RX IRQ coalescing support (Al Stone) [2071839]
- can: mcp251xfd: ring: add support for runtime configurable RX/TX ring parameters (Al Stone) [2071839]
- can: mcp251xfd: update macros describing ring, FIFO and RAM layout (Al Stone) [2071839]
- can: mcp251xfd: ring: prepare support for runtime configurable RX/TX ring parameters (Al Stone) [2071839]
- can: mcp251xfd: ethtool: add support (Al Stone) [2071839]
- can: mcp251xfd: ram: coalescing support (Al Stone) [2071839]
- can: mcp251xfd: ram: add helper function for runtime ring size calculation (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_ring_init(): use %%d to print free RAM (Al Stone) [2071839]
- can: vxcan: vxcan_xmit(): use kfree_skb() instead of kfree() to free skb (Al Stone) [2071839]
- can: gs_usb: add VID/PID for ABE CAN Debugger devices (Al Stone) [2071839]
- can: gs_usb: add VID/PID for CES CANext FD devices (Al Stone) [2071839]
- can: gs_usb: add extended bt_const feature (Al Stone) [2071839]
- can: gs_usb: activate quirks for CANtact Pro unconditionally (Al Stone) [2071839]
- can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value (Al Stone) [2071839]
- can: gs_usb: add usb quirk for NXP LPC546xx controllers (Al Stone) [2071839]
- can: gs_usb: add CAN-FD support (Al Stone) [2071839]
- can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame (Al Stone) [2071839]
- can: gs_usb: support up to 3 channels per device (Al Stone) [2071839]
- can: gs_usb: gs_usb_probe(): introduce udev and make use of it (Al Stone) [2071839]
- can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature (Al Stone) [2071839]
- can: gs_usb: document the USER_ID feature (Al Stone) [2071839]
- can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation (Al Stone) [2071839]
- can: gs_usb: add HW timestamp mode bit (Al Stone) [2071839]
- can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature (Al Stone) [2071839]
- can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb() (Al Stone) [2071839]
- can: gs_usb: rewrap error messages (Al Stone) [2071839]
- can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT() (Al Stone) [2071839]
- can: gs_usb: sort include files alphabetically (Al Stone) [2071839]
- can: gs_usb: fix checkpatch warning (Al Stone) [2071839]
- can: gs_usb: use consistent one space indention (Al Stone) [2071839]
- can: rcar_canfd: Add support for r8a779a0 SoC (Al Stone) [2071839]
- can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before calling es58x_check_msg_len() (Al Stone) [2071839]
- vxcan: enable local echo for sent CAN frames (Al Stone) [2071839]
- vxcan: remove sk reference in peer skb (Al Stone) [2071839]
- can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready (Al Stone) [2071839]
- can: gs_usb: change active_channels's type from atomic_t to u8 (Al Stone) [2071839]
- can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8 (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_priv: introduce macros specifying the number of supported TEF/RX/TX rings (Al Stone) [2071839]
- can: mcp251xfd: prepare for multiple RX-FIFOs (Al Stone) [2071839]
- can: mcp251xfd: ring: update FIFO setup debug info (Al Stone) [2071839]
- can: mcp251xfd: ring: mcp251xfd_ring_init(): checked RAM usage of ring setup (Al Stone) [2071839]
- can: mcp251xfd: ring: change order of TX and RX FIFOs (Al Stone) [2071839]
- can: mcp251xfd: ring: prepare to change order of TX and RX FIFOs (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_ring_init(): split ring_init into separate functions (Al Stone) [2071839]
- can: mcp251xfd: introduce struct mcp251xfd_tx_ring::nr and ::fifo_nr and make use of it (Al Stone) [2071839]
- can: mcp251xfd: add support for internal PLL (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_register(): prepare to activate PLL after softreset (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_clock_init(): prepare for PLL support, wait for OSC ready (Al Stone) [2071839]
- can: mcp251xfd: __mcp251xfd_chip_set_mode(): prepare for PLL support: improve error handling and diagnostics (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_wake(): renamed from mcp251xfd_chip_clock_enable() (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_timestamp_init(): factor out into separate function (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_softreset_check(): wait for OSC ready before accessing chip (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): prepare for PLL support (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): improve chip detection and error handling (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_wait_for_osc_ready(): factor out into separate function (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_stop(): convert to a void function (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_sleep(): introduce function to bring chip into sleep mode (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_unregister(): simplify runtime PM handling (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_regmap_crc_read(): ignore CRC error only if solely OSC register is read (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_reg_invalid(): rename from mcp251xfd_osc_invalid() (Al Stone) [2071839]
- can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation (Al Stone) [2071839]
- can: xilinx_can: Add check for NAPI Poll function (Al Stone) [2071839]
- can: softing: softing_netdev_open(): remove redundant ret variable (Al Stone) [2071839]
- can: c_can: ethtool: use default drvinfo (Al Stone) [2071839]
- can: kvaser_usb: kvaser_usb_send_cmd(): remove redundant variable actual_len (Al Stone) [2071839]
- can: bittiming: mark function arguments and local variables as const (Al Stone) [2071839]
- can: bittiming: can_validate_bitrate(): simplify bit rate checking (Al Stone) [2071839]
- can: flexcan: mark RX via mailboxes as supported on MCF5441X (Al Stone) [2071839]
- can: tcan4x5x: regmap: fix max register value (Al Stone) [2071839]
- can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0 (Al Stone) [2071839]
- can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved} (Al Stone) [2071839]
- can: rcar_canfd: rcar_canfd_channel_probe(): make sure we free CAN network device (Al Stone) [2071839]
- can: xilinx_can: xcan_probe(): check for error irq (Al Stone) [2071839]
- can: softing: softing_startstop(): fix set but not used variable warning (Al Stone) [2071839]
- can: softing_cs: softingcs_probe(): fix memleak on registration failure (Al Stone) [2071839]
- can: flexcan: add ethtool support to get rx/tx ring parameters (Al Stone) [2071839]
- can: flexcan: add ethtool support to change rx-rtr setting during runtime (Al Stone) [2071839]
- can: flexcan: add more quirks to describe RX path capabilities (Al Stone) [2071839]
- can: flexcan: rename RX modes (Al Stone) [2071839]
- can: flexcan: allow to change quirks at runtime (Al Stone) [2071839]
- can: flexcan: move driver into separate sub directory (Al Stone) [2071839]
- can: mcp251xfd: introduce and make use of mcp251xfd_is_fd_mode() (Al Stone) [2071839]
- can: mcp251xfd: move ring init into separate function (Al Stone) [2071839]
- can: mcp251xfd: move chip FIFO init into separate file (Al Stone) [2071839]
- can: mcp251xfd: move TEF handling into separate file (Al Stone) [2071839]
- can: mcp251xfd: move TX handling into separate file (Al Stone) [2071839]
- can: mcp251xfd: move RX handling into separate file (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd.h: sort function prototypes (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_handle_rxovif(): denote RX overflow message to debug + add rate limiting (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_open(): make use of pm_runtime_resume_and_get() (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_open(): open_candev() first (Al Stone) [2071839]
- can: mcp251xfd: add missing newline to printed strings (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_tef_obj_read(): fix typo in error message (Al Stone) [2071839]
- can: mcp251xfd: remove double blank lines (Al Stone) [2071839]
- can: janz-ican3: initialize dlc variable (Al Stone) [2071839]
- can: gs_usb: fix use of uninitialized variable, detach device on reception of invalid USB data (Al Stone) [2071839]
- can: netlink: report the CAN controller mode supported flags (Al Stone) [2071839]
- can: dev: add sanity check in can_set_static_ctrlmode() (Al Stone) [2071839]
- can: dev: replace can_priv::ctrlmode_static by can_get_static_ctrlmode() (Al Stone) [2071839]
- can: dev: add can_tdc_get_relative_tdco() helper function (Al Stone) [2071839]
- can: do not copy the payload of RTR frames (Al Stone) [2071839]
- can: kvaser_usb: do not increase tx statistics when sending error message frames (Al Stone) [2071839]
- can: etas_es58x: es58x_init_netdev: populate net_device::dev_port (Al Stone) [2071839]
- can: sja1000: sp_probe(): use platform_get_irq() to get the interrupt (Al Stone) [2071839]
- can: ti_hecc: ti_hecc_probe(): use platform_get_irq() to get the interrupt (Al Stone) [2071839]
- can: kvaser_usb: make use of units.h in assignment of frequency (Al Stone) [2071839]
- can: mcp251x: mcp251x_gpio_setup(): Get rid of duplicate of_node assignment (Al Stone) [2071839]
- can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv (Al Stone) [2071839]
- can: kvaser_usb: get CAN clock frequency from device (Al Stone) [2071839]
- can: kvaser_pciefd: kvaser_pciefd_rx_error_frame(): increase correct stats->{rx,tx}_errors counter (Al Stone) [2071839]
- can: hi311x: hi3110_can_probe(): convert to use dev_err_probe() (Al Stone) [2071839]
- can: hi311x: hi3110_can_probe(): make use of device property API (Al Stone) [2071839]
- can: hi311x: hi3110_can_probe(): try to get crystal clock rate from property (Al Stone) [2071839]
- can: hi311x: hi3110_can_probe(): use devm_clk_get_optional() to get the input clock (Al Stone) [2071839]
- can: sun4i_can: add support for R40 CAN controller (Al Stone) [2071839]
- can: bittiming: replace CAN units with the generic ones from linux/units.h (Al Stone) [2071839]
- can: m_can: pci: use custom bit timings for Elkhart Lake (Al Stone) [2071839]
- can: m_can: make custom bittiming fields const (Al Stone) [2071839]
- can: m_can: pci: fix incorrect reference clock rate (Al Stone) [2071839]
- can: m_can: pci: fix iomap_read_fifo() and iomap_write_fifo() (Al Stone) [2071839]
- can: m_can: m_can_read_fifo: fix memory leak in error branch (Al Stone) [2071839]
- can: m_can: Disable and ignore ELO interrupt (Al Stone) [2071839]
- can: sja1000: fix use after free in ems_pcmcia_add_card() (Al Stone) [2071839]
- can: pch_can: pch_can_rx_normal: fix use after free (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_chip_start(): fix error handling for mcp251xfd_chip_rx_int_enable() (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_irq(): add missing can_rx_offload_threaded_irq_finish() in case of bus off (Al Stone) [2071839]
- can: peak_usb: exchange the order of information messages (Al Stone) [2071839]
- can: peak_usb: always ask for BERR reporting for PCAN-USB devices (Al Stone) [2071839]
- can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error path (Al Stone) [2071839]
- can: xilinx_can: xcan_remove(): remove redundant netif_napi_del() (Al Stone) [2071839]
- can: xilinx_can: remove repeated word from the kernel-doc (Al Stone) [2071839]
- can: peak_usb: CANFD: store 64-bits hw timestamps (Al Stone) [2071839]
- can: gs_usb: use %%u to print unsigned values (Al Stone) [2071839]
- can: mscan: mpc5xxx_can: Make use of the helper function dev_err_probe() (Al Stone) [2071839]
- can: rcar: drop unneeded ARM dependency (Al Stone) [2071839]
- can: at91/janz-ican3: replace snprintf() in show functions with sysfs_emit() (Al Stone) [2071839]
- can: netlink: add can_priv::do_get_auto_tdcv() to retrieve tdcv from device (Al Stone) [2071839]
- can: netlink: add interface for CAN-FD Transmitter Delay Compensation (TDC) (Al Stone) [2071839]
- can: bittiming: change can_calc_tdco()'s prototype to not directly modify priv (Al Stone) [2071839]
- can: bittiming: change unit of TDC parameters to clock periods (Al Stone) [2071839]
- can: bittiming: allow TDC{V,O} to be zero and add can_tdc_const::tdc{v,o,f}_min (Al Stone) [2071839]
- can: bittiming: fix documentation for struct can_tdc (Al Stone) [2071839]
- can: bittiming: can_fixup_bittiming(): change type of tseg1 and alltseg to unsigned int (Al Stone) [2071839]
- treewide: Replace open-coded flex arrays in unions (Al Stone) [2071839]
- can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the nullity of a pointer (Al Stone) [2071839]
- can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state notification (Al Stone) [2071839]
- can: peak_pci: peak_pci_remove(): fix UAF (Al Stone) [2071839]
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo() (Al Stone) [2071839]
- can: rcar_can: fix suspend/resume (Al Stone) [2071839]
- can: flexcan: Use struct_group() to zero struct flexcan_regs regions (Al Stone) [2071839]
- tty: make tty_ldisc_ops::hangup return void (Al Stone) [2071839]
- can: c_can: fix null-ptr-deref on ioctl() (Al Stone) [2071839]
- can: rcar_canfd: add __maybe_unused annotation to silence warning (Al Stone) [2071839]
- can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): remove useless BUG_ON() (Al Stone) [2071839]
- can: mscan: mpc5xxx_can: mpc5xxx_can_probe(): use of_device_get_match_data to simplify code (Al Stone) [2071839]
- can: rcar_canfd: rcar_canfd_handle_channel_tx(): fix redundant assignment (Al Stone) [2071839]
- can: rcar: Kconfig: Add helper dependency on COMPILE_TEST (Al Stone) [2071839]
- can: c_can: cache frames to operate as a true FIFO (Al Stone) [2071839]
- can: c_can: support tx ring algorithm (Al Stone) [2071839]
- can: c_can: exit c_can_do_tx() early if no frames have been sent (Al Stone) [2071839]
- can: c_can: remove struct c_can_priv::priv field (Al Stone) [2071839]
- can: c_can: rename IF_RX -> IF_NAPI (Al Stone) [2071839]
- can: c_can: c_can_do_tx(): fix typo in comment (Al Stone) [2071839]
- can: m_can: Batch FIFO writes during CAN transmit (Al Stone) [2071839]
- can: m_can: Batch FIFO reads during CAN receive (Al Stone) [2071839]
- can: m_can: Disable IRQs on FIFO bus errors (Al Stone) [2071839]
- can: m_can: fix block comment style (Al Stone) [2071839]
- can: tcan4x5x: cdev_to_priv(): remove stray empty line (Al Stone) [2071839]
- can: rcar_canfd: Add support for RZ/G2L family (Al Stone) [2071839]
- can: mcp251xfd: mark some instances of struct mcp251xfd_priv as const (Al Stone) [2071839]
- can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg (Al Stone) [2071839]
- can: netlink: allow user to turn off unsupported features (Al Stone) [2071839]
- can: dev: provide optional GPIO based termination support (Al Stone) [2071839]
- can: flexcan: flexcan_clks_enable(): add missing variable initialization (Al Stone) [2071839]
- can: flexcan: update Kconfig to enable coldfire (Al Stone) [2071839]
- can: flexcan: add mcf5441x support (Al Stone) [2071839]
- can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to increase readability (Al Stone) [2071839]
- can: etas_es58x: use sizeof and sizeof_field macros instead of constant values (Al Stone) [2071839]
- can: etas_es58x: add es58x_free_netdevs() to factorize code (Al Stone) [2071839]
- can: etas_es58x: use devm_kzalloc() to allocate device resources (Al Stone) [2071839]
- can: etas_es58x: use error pointer during device probing (Al Stone) [2071839]
- can: etas_es58x: fix three typos in author name and documentation (Al Stone) [2071839]
- can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes (Al Stone) [2071839]
- can: peak_usb: pcan_usb_encode_msg(): add information (Al Stone) [2071839]
- can: peak_usb: PCAN-USB: add support of loopback and one-shot mode (Al Stone) [2071839]
- can: peak_usb: pcan_usb_get_device_id(): read value only in case of success (Al Stone) [2071839]
- can: peak_pci: Add name and FW version of the card in kernel buffer (Al Stone) [2071839]
- can: peak_pci: fix checkpatch warnings (Al Stone) [2071839]
- can: peak_pci: convert comments to network style comments (Al Stone) [2071839]
- net: at91_can: fix the comments style issue (Al Stone) [2071839]
- net: at91_can: remove redundant space (Al Stone) [2071839]
- net: at91_can: add braces {} to all arms of the statement (Al Stone) [2071839]
- net: at91_can: fix the alignment issue (Al Stone) [2071839]
- net: at91_can: use BIT macro (Al Stone) [2071839]
- net: at91_can: fix the code style issue about macro (Al Stone) [2071839]
- net: at91_can: add blank line after declarations (Al Stone) [2071839]
- net: at91_can: remove redundant blank lines (Al Stone) [2071839]
- can: at91_can: use DEVICE_ATTR_RW() helper macro (Al Stone) [2071839]
- can: janz-ican3: use DEVICE_ATTR_RO/RW() helper macro (Al Stone) [2071839]
- can: esd_usb2: use DEVICE_ATTR_RO() helper macro (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_open(): request IRQ as shared (Al Stone) [2071839]
- can: mcp251xfd: Fix header block to clarify independence from OF (Al Stone) [2071839]
- can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from property (Al Stone) [2071839]
- can: m_can: use devm_platform_ioremap_resource_byname (Al Stone) [2071839]
- can: m_can: Add support for transceiver as phy (Al Stone) [2071839]
- can: netlink: remove redundant check in can_validate() (Al Stone) [2071839]
- can: netlink: clear data_bittiming if FD is turned off (Al Stone) [2071839]
- can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt (Al Stone) [2071839]
- can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule() (Al Stone) [2071839]
- can: rx-offload: add skb queue for use during ISR (Al Stone) [2071839]
Resolves: rhbz#2071839
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
|
||
|---|---|---|
| .gitignore | ||
| check-kabi | ||
| cpupower.config | ||
| cpupower.service | ||
| filter-aarch64.sh.rhel | ||
| filter-armv7hl.sh.rhel | ||
| filter-modules.sh.rhel | ||
| filter-ppc64le.sh.rhel | ||
| filter-s390x.sh.rhel | ||
| filter-x86_64.sh.rhel | ||
| gating.yaml | ||
| generate_all_configs.sh | ||
| kernel-aarch64-debug-rhel.config | ||
| kernel-aarch64-rhel.config | ||
| kernel-local | ||
| kernel-ppc64le-debug-rhel.config | ||
| kernel-ppc64le-rhel.config | ||
| kernel-s390x-debug-rhel.config | ||
| kernel-s390x-rhel.config | ||
| kernel-s390x-zfcpdump-rhel.config | ||
| kernel-x86_64-debug-rhel.config | ||
| kernel-x86_64-rhel.config | ||
| kernel.spec | ||
| kvm_stat.logrotate | ||
| linux-kernel-test.patch | ||
| Makefile.rhelver | ||
| merge.pl | ||
| mod-denylist.sh | ||
| mod-extra.list.rhel | ||
| mod-internal.list | ||
| mod-sign.sh | ||
| Module.kabi_aarch64 | ||
| Module.kabi_dup_aarch64 | ||
| Module.kabi_dup_ppc64le | ||
| Module.kabi_dup_s390x | ||
| Module.kabi_dup_x86_64 | ||
| Module.kabi_ppc64le | ||
| Module.kabi_s390x | ||
| Module.kabi_x86_64 | ||
| parallel_xz.sh | ||
| partial-kgcov-snip.config | ||
| patch-5.14-redhat.patch | ||
| process_configs.sh | ||
| README.rst | ||
| rheldup3.x509 | ||
| rhelkpatch1.x509 | ||
| rpminspect.yaml | ||
| sources | ||
| update_scripts.sh | ||
| x509.genkey.centos | ||
| x509.genkey.rhel | ||
=================== The Kernel dist-git =================== The kernel is maintained in a `source tree`_ rather than directly in dist-git. The specfile is maintained as a `template`_ in the source tree along with a set of build scripts to generate configurations, (S)RPMs, and to populate the dist-git repository. The `documentation`_ for the source tree covers how to contribute and maintain the tree. If you're looking for the downstream patch set it's available in the source tree with "git log master..ark-patches" or `online`_. Each release in dist-git is tagged in the source repository so you can easily check out the source tree for a build. The tags are in the format name-version-release, but note release doesn't contain the dist tag since the source can be built in different build roots (Fedora, CentOS, etc.) .. _source tree: https://gitlab.com/cki-project/kernel-ark.git .. _template: https://gitlab.com/cki-project/kernel-ark/-/blob/os-build/redhat/kernel.spec.template .. _documentation: https://gitlab.com/cki-project/kernel-ark/-/wikis/home .. _online: https://gitlab.com/cki-project/kernel-ark/-/commits/ark-patches