This makes sure the test configurations will be accepted in real usage.
It also enables us to remove some manual error checking that will be
performed by validator.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The same way live_media and image_build accept additional external repos
or variants list, there is now a `repo` and `repo_from` configuration
key to add these.
Fixes: #486
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Using getattr so we also work with versions of koji that do not
read principal and keytab from the config file.
Signed-off-by: Patrick Uiterwijk <puiterwijk@redhat.com>
Buildinstall only runs for top-level variants. Addons, optionals and
integrated layered products must reuse install tree from their parent,
because otherwise there would be no boot.iso.
Fixes: #472
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Given the way config files can include other files, it is entirely
possible to use the same config file for both Pungi and Distill. Pungi
will however complain about unknown options.
This patch reverts part of c38bb480 and moves deprecation handling back
into schema validation. The validation method then returns a list of
errors and a list of warnings.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When running with this option, if a debuginfo package is included in the
final package set, there would be a crash due to missing SRPM. To
replicate this issue, just use the argument with input kickstart listing
a single package which has debuginfo.
This is not an issue for Pungi 4, as it never uses the option in the
first place.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Source packages can be excluded while binary packages should still go
into the compose. This patch makes it so that the mapping from binary
packages to source packages contains None in such case. The code is
already capable of handling that. A warning will be emitted for each
binary package without source.
This also allows us to remove some code from `createSourceHashes` that
is now unused.
A test for excluding source package is added as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The new sub-command 'installer' is added to support build OSTree
installer image with pungi-make-ostree. It can take an optional argument
'--extra-config' to read some of configurations from a json file. The
content of the json file can contains the configuration which are
supported in OSTree installer phase, the difference is variant UID is
not supported as a repo url in this case. A valid json file can be like
the following:
{
"source_repo_from": "http://www.example.com/repo/workstation/os",
"installpkgs": [
"fedora-productimg-workstation"
],
"add_template": [
"/path/to/installer/template/lorax-configure-repo.tmpl"
],
"add_template_var": [
"ostree_osname=fedora-workstation",
"ostree_ref=fedora/25/x86_64/workstation"
],
"add_arch_template": [
"/path/to/installer/template/lorax-embed-repo.tmpl"
],
"add_arch_template_var": [
"ostree_repo=https://www.example.com/compose/ostree",
"ostree_osname=fedora-workstation",
"ostree_ref=fedora/25/x86_64/workstation"
]
}
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Update pungi-make-ostree to supourt sub-command 'tree', which is just
as the original feature of pungi-make-ostree to compose OSTree tree.
With the change we can add other sub commands later to build other
OSTree artifacts, like the installer image.
Inaddtional to the change, now the the 'tree' command can accept an
optional '--extra-config' parameter to update the original tree
configuration with extra configurations specified in a json file
before composing the OSTree tree.
Example:
pungi-make-ostree tree --repo=/ostree --treefile=/path/to/treefile \
--log-dir=/path/to/log --extra-config=/path/to/extra-config.json
The extra-config file can contains the same configuration as OSTree
phase, the difference is it doesn't understand variant UID as source
repo since it's not ran in the chain of phases. A valid configuration
can be like:
{
"source_repo_from": "http://example.com/repo/x86_64/Server",
"extra_source_repos": [
{
"name": "optional",
"baseurl": "http://example.com/repo/x86_64/optional",
"exclude": "systemd-container",
"gpgcheck": False
},
{
"name": "extra",
"baseurl": "http://example.com/repo/x86_64/extra",
}
],
"keep_original_sources": True
}
The OSTree phase is updated to move out the task of updating treefile,
instead of that, it writes the extra configurations to a json file,
then 'pungi-make-ostree tree' will take it by option '--extra-config'.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The internal flag in productmd is meant to indicate that a compose is
not meant for publishing. This is potentially useful to allow filtering
in PDC or similar service.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All tests should print complete diffs on failure, so there is no need to
define this in each test separately.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Phases createiso, liveimages, image_build, ostree_installer and osbs are
done in parallel, logs from these phases are mixed and and it's not
obvious which log message belongs to which phase. This change adds phase
name in log message for these phases.
The new mixin 'PhaseLoggerMixin' is added to extend a Pungi phase with a
logging logger which copy handlers from compose's logger but with
formatter changed.
Fixes: #58
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The check for arch compatibility should not be performed if the
debuginfo package is noarch. Such packages should be included
unconditionally.
Fixes: #450
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the media is bootable, we can not split it. The limit is not used in
that case and we may overflow it with an warning message. The warning
should correctly mention what is going on instead of printing a
non-sensical message about free space on media being some huge number.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the test did not specify an arch explicitly, it fell back on whatever
arch the current machine has. This was causing failures when building
RPM.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes addtional repos are required to get necessary packages for
composing OSTree repository. For example, RHEL doesn't have an 'Everyting'
variant, so composing OSTree repository from any of the RHEL variants
won't work, addtional source repos need to be enabled to achieve that.
The new option "extra_source_repos" enable the ability of allowing extra
source repos.
And a new option 'keep_original_sources' is introduced to keep the
original repos found in tree config file, if this is enabled, Pungi
will not remove the existing source repos from the tree config file,
just add new repos of "source_repo_from" + "extra_source_repos" to
the existing repos.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Instead of spawning a separate process for each test, move the code to
run in the main process. This gives us correct coverage information and
makes the tests a lot faster.
The input is still provided in a kickstart file. The output also goes
into a log file that is later parsed.
There is some extra work needed with logging setup to make the logs go
to standard output so that nose can correctly capture them.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The Pungi object reuses the same logger for all its instances. Every
time a new instance is created, a stream handler would be added. This
means that a second instance will print everything twice. When running
tests, tens of instances would be created.
This patch only adds the handler if there are no handlers configured
yet.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch changes the format a little and makes sure the output goes to
the same logger as the rest of the output. The output no longer contains
control characters.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a file is exported from an RPM in the compose, and there is no
matching RPM in the package set, we want a nice error message.
Fixes: #460
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `get_variants()` method had a `recursive` argument with default
value of `False. However, this argument had no effect and the method
always returned all variants recursively.
We can just drop the argument. All callers are updated to not supply the
argument. Should any need for getting the top-level variants only arise,
they can be accessed as the `variants` attribute directly on the Compose
object.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The code to search for install tree and repo for image-build and
live-media was only looking at top-level variants. Addons, optional or
integrated layered products could not have been found. This would lead
to error messages such as "There is no variant Server-optional to get
repo from when building live image for Client" even though the variant
exists.
Various tests are updated to exercise this edge case.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Tell lorax to use a specific directory for log files so that we preserve
them despite koji not having any idea about them.
Fixes: #457
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When running from git, the files should be found relative to the python
module, not executable itself. This change makes it possible to load the
files when running tests.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the input explicitly lists a package as multilib, we should not
automatically add native version just because of fulltree.
The tests for this use case are now enabled and passing.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
These are tests written by Daniel Mach originally for Distill-NG. They
are ported to current Pungi. The test repositories are committed in the
tests/fixtures/ directory. This is the same data that is used for test
compose, but the actual RPM files are not present. Some tests are
adapted from dmach's fork of Pungi.
Some of the packages are marked with a comment saying they are
important. These are the packages that the test is specifically trying
to get included in the package set. There are also explicit tests for
packages that should not be included.
Two tests are skipped for now as there is a bug preventing them from
passing. This is related to fulltree being done for packages that are
explicitly multilib.
The depsolver is called by invoking a separate executable, so the
coverage data is wrong.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Added new option '--version' to pungi-make-ostree, and this can be
enabled in ostree settings with 'version'. The version string will be
added as versioning metadata if this is specified.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
