If there is leading or trailing whitespace in a comps group name, it
will not be included in the compose and there will even be no error
message. Whitespace on module name results in a failure.
To avoid these errors, validating the variants file will now also check
that there is no whitespace in significant places, and abort the compose
if there a problem.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The task can take a while to finish, and it's possible for the
authenticated session to expire in the mean time. Watching the task will
work, because that happens by spawning `koji watch-task` as subprocess.
We can work around this by creating a fresh unauthenticated session for
getting the task results.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This fixes a case where extra packages are pulled in.
The scenario is:
* there's a lookaside repo which contains group G which has package P
* we want to pull group G into the compose, but our definition of G
does not contain P
* lookaside repo does not contain package P
* current package set has P
DNF depsolver will then merge the two definitions and try to get all the
packages. For most cases this is not a problem, since the package is in
the lookaside repo and will not be pulled into the compose. But in the
example above since P is not in lookaside, Pungi will put it into
current compose.
This is also ugly in the depsolving log says it includes package P
because it was in input. But checking comps file does not show it.
The result of this change is that some packages might disappear from
current composes. This can only happen if there is a lookaside which
defines groups with similar IDs, which should be very rare. In cases
where this would be a problem the fix is to explicitly add wanted
packages either to comps or to additional packages.
Fixes: https://pagure.io/pungi/issue/978
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
After cloning the repository with defaults, open each file and try to
check if there is more than one definition for the same module. It's not
a problem for the compose process, but consumers of the compose would
get confused and possibly explode. Better alert people early.
Conceptually this should be part of the test phase, but that would mean
waiting for the compose to finish before reporting the error. The
earlier the better.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the compose is not using comps, we can't pass the comps to lorax,
since it doesn't exist and it would cause a crash.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
During the createrepo phase for Modular variants, this will now
interrogate the repodata from the "work" repositories for the set of
licenses in use by each of the RPMs in a module and add those to the
metadata to be written out into the final repodata location.
Merges: https://pagure.io/pungi/pull-request/968
Signed-off-by: Stephen Gallagher <sgallagh@redhat.com>
* Koji can now be installed from PyPI and it will also pull in rpm. This
needs rpm-devel install on the system. This means we can get kobo from
PyPI as well.
* Using print function should make it work for python 3 virtualenvs.
* Newer we need kobo in 0.6.0 at least, but newer is fine too.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When multiple composes are chained, they should reuse the same event.
However it is tricky as the value would have to be passed by hand. This
patch makes it possible to read the value from another compose (the
first one in the chain).
JIRA: COMPOSE-2571
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The Modulemd.copy() method has been available since libmodulemd 1.1
and is much faster than dumping to a string and parsing it again.
Signed-off-by: Stephen Gallagher <sgallagh@redhat.com>
Merges: https://pagure.io/pungi/pull-request/965
It's a bit unfortunate we can't use the logger for printing these, but
there is cyclic dependency: to set up logger, we need Compose object (to
generate path to log file), but to create Compose object we need a valid
config.
JIRA: COMPOSE-2577
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The commands in runroot run as root every time. If they create files
that are not readable to other users, the reset of compose could have
problems with it if it does not run as root too. Particularly updates
composes in Bodhi run under apache user.
Relates: https://pagure.io/pungi/issue/932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All the components are there already separately, but having the full NVR
should simplify searching the metadata with grep.
JIRA: COMPOSE-2519
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `add_noarch` option of `get_valid_arches` is broken and doesn't
really do anything (noarch is always present in the result).
This causes packages that have ExclusiveArch including noarch to
actually not be excluded. They should be.
Changing this globally could have a very big impact. Therefore we can
hide it behind a configuration option so that it's opt-in.
JIRA: COMPOSE-2457
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is an optimization for Yum. DNF does not care at all.
The behaviour is configurable, but the default depends on gather
backend, as that is what users should be using to consume the packages
from the repo.
Fixes: https://pagure.io/pungi/issue/951
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It should not be needed there, since the repo is empty anyway. A test is
added for the variant specific comps repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is used for mapping basearch to binary arch.
One use for this is when running depsolving to tell yum/dnf what arch to
work with. With this change it will get i686 instead of athlon when
working on i386 basearch.
The other use case is finding arches compatible with given basearch. The
change will remove athlon from the list for i386.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should give us better error reporting. The `copy_all` function
should preserve permissions on all files.
Relates: https://pagure.io/pungi/issue/932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It does not exist on Python 3. Converting the exception to string works
identically.
The validate methods on many phases are simplified by not calling the
parent (which does not do anything).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It checks config file value 'skip_phases' for valid phases names.
Also checks command-line attribute 'skip-phase' of 'bin/pungi-koji'.
JIRA: COMPOSE-2493
Signed-off-by: Ondrej Nosek <onosek@redhat.com>
This way some parts of the code will be reusable. This should have no
effects on the outcome, the tests still pass without any changes needed.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For variants that contain all packages (Fedora's Everything) we don't
want to lose any environments.
Fixes: https://pagure.io/pungi/issue/940
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was added back when rpmutils module was used. Since we migrated to
Python 3 we have included the code directly in Pungi (because it was
coming from yum which is not going to Py3 any time soon). The mocks can
be dropped.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is really no need to write out megabytes of logs that are not
really interesting. This should also help the parallelization. With the
verbose log createrepo fills the output buffer and needs to wait for the
busy python program to read it first.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The files created in koji runroot will be owned by root. If the compose
is done under different user, there could be a problem with copying the
files preserving the owner. Let's just copy them without that.
Fixes: https://pagure.io/pungi/issue/932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the ISO is meant to be bootable but lorax fails, there's no point in
creating the ISO as it will not behave as expected.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1574585
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the parent task is successful, there can still be failed child tasks
for failable arches. We need to log those and potentially mark the
compose as incomplete.
Fixes: https://pagure.io/pungi/issue/874
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the config is syntactically correct, but it contains some issues
discovered in `validate` method of any phase, we need to raise an
exception, not exit immediately.
JIRA: COMPOSE-2431
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With one compose combining traditional and modular content there might
be different requirements for tag inheritance. This patch adds a new
option that controls whether builds in modular tags should be inherited.
It defaults to False, which is the right option for current MBS
behavior.
JIRA: COMPOSE-2148
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
