The original code could cause a source RPM to be present in two variants
that have a dependency relation.
There is always only one source repo for a variant in the final compose.
When gathering packages for a variant that depends on another variant,
we need to build a temporary lookaside repo that has similar content to
the parent variant. This lookaside only contained source RPMs for
packages present the the architecture.
This could result in duplicated SRPMs in the compose.
Example situation:
* Variant B depends on variant A.
* A contains foo.x86_64.rpm (only on x86_64)
* B pulls in subpackage foo-bar.s390x.rpm (on s390x)
Source repo for A will correctly contain foo.src.rpm. With original code
the srpm would also end up in B.src. By adding all sources to the
temporary lookaside Pungi will know that source repo for B doesn't need
to duplicate the package.
The refactoring to use a set to store the packages is meant to avoid
listing the same SRPM multiple times in the repo in the most common
situation when SRPM is listed in multiple architectures.
JIRA: RHELCMP-6002
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It is possible to try to re-run a compose with old event. When trying to
reuse pkgset data, we must use set the bounds not based on
current/reused event, but actually check which was first.
JIRA: CWFHEALTH-495
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make sure that the function returns a path even for local files
specified by file:// urls.
JIRA: RHELCMP-5340
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Trying to compose from external classic repositories return an error trying the hardling from
a yum cache directory located in /tmp to the target directory in another filesystem.
This commit fixes this using the 'link' method form linker module which handle the link_type
configuration parameter instead of the hardcoded method 'hardlink'.
Change-Id: Ib79cfbd72f9def6462fddb2ae368730c55f257cd
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
- Do not reuse when there is any external lookaside repo
- Do not reuse when lookaside variant is not reused
JIRA: RHELCMP-4596
Signed-off-by: Haibo Lin <hlin@redhat.com>
The original code ended up downloading all repodata from the lookaside
repo. This could cause a lot of memory to be used.
The new code only downloads the repomd.xml and then primary record,
which is sufficient to obtain all needed information. A lot less memory
is used and the code is also significantly faster.
Here are some alternative ways of getting a list of packages from the
lookaside repo and reasons why they did not work:
* dnf repoquery - this doesn't include modular packages unless the
stream is default
* dnf reposync - requires `--urls` option to only print the names,
which is not available on RHEL 7
JIRA: RHELCMP-4761
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There are two images because it's hard to install both Python 2
and Python 3 packages (e.g. libcomps) in latest fedora release.
JIRA: RHELCMP-4580
Signed-off-by: Haibo Lin <hlin@redhat.com>
OSBS will reject no scratch builds with arch_override.
When the option is not specified in Pungi, it would do `"".split(" ")`
to get list of arches, which returns a list with empty string instead of
an empty list.
With this fixed, it might be possible to have multiple images match the
spec (unless arch is used in the filter). To fix that, we can replace
arch with $basearch variable.
JIRA: RHELCMP-3824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Previously commands to adjust permissions do not run when main
command failed and then files can't be cleaned up due to
Permission Denied problem.
JIRA: RHELCMP-4253
Signed-off-by: Haibo Lin <hlin@redhat.com>
The name brings a different expectation than how it actually worked.
This patch makes the code work similarly to the expectation.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a module is skipped from the compose, we should not add it to a
mapping of module tags. If it's there, we then spend time building a
repo for the module, and it get's passed to buildinstall, despite the
packages not being supposed to be included in the compose.
If the packages are not included in any variant, they shouldn't be
available to buildinstall either.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a gathering thread raises an exception, it gets forwarded to the
main thread and re-raised there. However, during this transition it
loses details about exact location of the problem.
This patch creates an extended traceback in the worker, which should
make it easier to track the problem down later.
JIRA: RHELCMP-4259
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If packages are appearing quickly in Koji, and signing them is triggered
by automation, there may be a delay between the package being signed and
compose running. In such case it may be preferable to wait for the
signed copy rather than fail the compose.
JIRA: RHELCMP-3932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs after image-build and osbuild and can embed an image
into a container.
JIRA: RHELCMP-3820
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Rather than tracking this directly in OSBS phase, move this into Compose
object, which will allow access to this from multiple phases.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This file can contain all Pungi specific exceptions.
It should also fix an issue encountered on Python 2.7:
AttributeError: 'module' object has no attribute 'pkgsets'
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When adding extra modules via option *pkgset_koji_module_builds*, all
other versions of the same stream potentially available in a Brew tag
should be skipped.
JIRA: RHELCMP-3689
Signed-off-by: Haibo Lin <hlin@redhat.com>
In such case we never want to reuse the pkgset, as it risks leaking
unsigned packages. Safest option is to remove the file completely.
Fixes: https://pagure.io/pungi/issue/1480
JIRA: RHELCMP-3720
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
createrepo_checksum already defaults to sha256. Remove this setting from
the documented Minimal Example configuration to make it easier to read.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
When the wrapper processes comps file, it wasn't emitting "default"
argument for groupid element. The default is false and most entries are
actually using the default, so let's only emit it if set to true.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1882358
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The task can only fail as a whole, thus it only makes sense to set all
architectures (`*`) as failable. The correct value needs to be checked
though.
JIRA: RHELCMP-3412
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of parsing the log file to get the NVR and then in turn
use that to get to the build info use the structured return value
from the koji task. The return value of the osbuild plugin is:
result = {
"composer": {
"server": <COMPOSER_URL>,
"id": <COMPOSE_ID>
},
"koji": {
"build": <BUILD_ID>
}
}
This means we have direct access to the koji build id, which was
returned by composer to the plugin via its status API. Using that
removes the need to parse the log file.
Adapt the test accordingly.
Merges: https://pagure.io/pungi/pull-request/1475
Signed-off-by: Christian Kellner <christian@kellner.me>
A new configuration *createiso_use_xorrisofs* is added to determine
which tool to use for creating ISOs.
By default, createiso_use_xorrisofs = False and genisoimage will be used.
When set to True, xorrisofs will be used.
JIRA: RHELCMP-2875
Fixes: https://pagure.io/pungi/issue/1130
Signed-off-by: Haibo Lin <hlin@redhat.com>
Previously, the pkg_object has been found by iterating over pkg_sets
for each package. This was quite slow given the number of RPMs in the
compose.
In this commit, the temporary dict is created which stores mapping
between path and pkg_obj and is used instead.
In this commit, the get_package_path is called just once instead of
twice in the loop which might also save some time.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
The pkgset_koji_builds influences the gather phase, but the
change itself is not a reason to not reuse old gather phase. if
new pkgset_koji_builds value leads to significant change in input
package set, we will find that later in this function when comparing
old and new package set.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
These methods return command as list which is never serialized to str and
never executed using bash. It is instead passed directly to
`kobo.shortcuts.run`.
The `shlex_quote` usage here actually breaks the code, because it adds
quotes there which are needed only if this command would be serialized
to string and passed to bash. But this never happens. As a result,
the arguments passed to `kobo.shortcuts.run` contain those extra
quotes.
In this commit the shlex_quote is removed completely from this
part of code.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
