It ends up that this isn't as easy as you'd think. Anaconda sets up some
signal handlers to handle cleanly exiting, but they are not being run
when sent a TERM after package installation has started. I think DNF
resets them causing it to get ignored.
When the cancel is sent it can take several minutes for it to have an
effect. In my testing it usually takes around 2 minutes for anaconda to
notice and exit.
This sends a TERM to the process and then waits for it to exit. When it
returns it then removed any device-mapper devices that were setup for
image installations, removes any hanging loop devices.
It then kills off any process with pyanaconda. in the cmdline, and
anaconda-bus.conf (because anaconda starts a bunch of helpers and if it
doesn't shut down cleanly they remain running).
Resolves: rhbz#1656691
In addition to monitoring the logs for errors, call a function (or
functions) that tell it to cancel the anaconda process and cleanup.
Also check for a cancel after creating the squashfs image for live-iso
since that's a long running process.
This required adding a new argument to a number of existing functions,
passing it down to QEMUInstall and novirt_install where the function is
called.
Resolves: rhbz#1656691
When there is no run or new symlink do one last check to make sure no
STATUS file was written. If it is missing, go ahead and remove the
results directory.
Related: rhbz#1656691
If another CANCEL request has already been made just exit from
uuid_cancel. If the build is FINISHED before it times out just exit,
don't remove the finished results.
Related: rhbz#1656691
Images don't work without these fixes:
* Enable Network Manager.
* Disable cloud-init.
* Add Hyper-V modules into initramfs.
Fixes specific for RHEL:
* Create ifcfg-eth0 required by waagent.
* Install python3 and net-tools required by waagent.
Recommended changes:
* Use recommended kernel boot args.
* Disable kdump.
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
(cherry picked from commit d18934775c)
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
(cherry picked from commit 4dd9004d13)
This is required to ensure that SELinux is configured properly while
building. It fixes the problem with building tar, and should be
installed in the other image types for consistency.
Resolves: rhbz#1645189
(cherry picked from commit 99d867db65)
SELinux applies the correct labels, setfiles is no longer needed.
This allows lorax to run with SELinux in Enforcing mode.
(cherry picked from commit 4a4a415f88)
Anaconda, Lorax, lorax-composer, and livemedia-creator can all now run
with SELinux in Enforcing mode. It does not need to be disabled and if
there are denials they should be reported as a bug.
Log the current state of SELinux when starting, update the
documentation.
(cherry picked from commit 080705e8e6)
Running lorax-composer --no-system-repos will prevent it from copying
the dnf repositories from /etc/yum.repos.d/ into the lorax-composer repo
directory. It will *only* use repositories setup using the sources api
or written to /var/lib/lorax/composer/repos.d/
If lorax-composer has previously been run without this switch the system
repos will need to be removed from the composer/repos.d/ directory. It
would also be a good idea to remove the cached metadata in
/var/tmp/composer/
Resolves: rhbz#1650363
(cherry picked from commit 43ff505804)
When using package name globs and multiple repos dnf doesn't choose the
highest NEVRA as you would expect, work around this by applying max() to
the duplicate package names in installpkg.
Resolves: rhbz#1548586
Depending on how lorax-composer is run setting up an empty blueprints
directory can fail. So this moves checking/creation until after the
other directories are created and uses make_owned_dir to make sure
ownership is correct.
It needs to be root in order to set the ownership and permissions on the
directories that are under /var/lib/lorax/composer/
Refactor the directory creation into a utility function, and use a umask
of 0o006 to ensure that the parent directories created do not have o+rw
set on them (makedirs behavior is different between Python 3.6 and 3.7
so umask of 0 doesn't work consistently).
Since these images can be used to create multiple machines, they should
not have a unique machine-id attached to them. Replace /etc/machine-id
with an empty file so that it will be regenerated at boot time.
If a package is in multiple repos dnf may return more than 1 of them
when using best...glob so we pick the highest NEVRA one and install
that.
Related: rhbz#1636239
At the end of disk image installs, use fstrim on the generated filesystem to
discard any blocks that were allocated during the install and are now unused.
This will allow tools such as qemu-img to create images that do not include
deleted data.
For raw disk images that do not go through qemu-img, use fallocate --dig-holes
to create sparse holes in place of the unused blocks.
composer-cli uses TOML for 'blueprints save' which was returning an
empty 200 response if the blueprint didn't exist. Change this to return
a standard 400 error response if the blueprint doesn't exist.
composer-cli is already setup to handle receiving json when an error is
returned so just the toml API response for `blueprints/save` needed to
be changed.
`os.path.exists("/run/weldr/api.socket")` returns False for users which have no
access. This leads to composer printing that the file does not exist, which is
misleading.
Since it's no possible to distinguish the two cases, fix this problem by
combining them and showing a single error message.
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
Also kill the lorax-composer process and remove /run/weldr/api.socket
so that when this is run with podman you don't get an error about
attempting to tar up the socket.
When the kickstart is handed off to Anaconda for building it will
download its own copy of the metadata and re-run the depsolve. So if the
dnf cache isn't current there will be a mismatch and the build will
fail to find some of the versions in final-kickstart.ks
This adds a new context to DNFLock, .lock_check, that will force a check
of the metadata. It also implements its own timeout and forces a
refresh of the metadata when that expires because the dnf expiration
doesn't always work as expected.
Resolves: rhbz#1631561
This tests to make sure that the metadata timer is working (by setting
it to 10s and adding a new package to the repo), and that
DNFLock.lock_check immediately picks up a new package.
This depends on rpmfluff which is available from Fedora or EPEL repos.
Related: rhbz#1631561
Ends up you cannot use the kickstart user command on root, since it
already exists, so we have to translate that into a rootpw command.
So [[customizations.user]] with name = "root" only support key, which
will set the ssh key, and password which will use rootpw to set the
password. plain text or encrypted are supported.
Related: rhbz#1626122
If we leave the root account w/o a password people will use it that way,
leading to insecure images. Also if we use a default password. So lock
the root account in the templates.
Users will need to do one of these things:
1. Use [[customizations.user]] in their blueprint to configure root or
another user.
2. Use [[customizations.sshkey]] to set a key for root
2. Install a package that configures a user at install time
3. Install a package that sets up a user at boot time (eg. cloud-init)
This also drops the auth line from the kickstart templates, allowing it
to use the default password algoritm instead of md5.
Resolves: rhbz#1626122
Remove `except` block which immediately raises the same exception again (it's
not a subclass of another caught exception, so this is safe).
Remove a false positive, because it is not emitted from the code base.
Disable subprocess-popen-preexec-fn in startProgram, which is not used
internally.
- need to specify --sharedir so lorax-composer can find its
kickstart files
- each test script writes results into a separate directory to
avoid a passing test overwriting the results from a failing one.
To avoid reporting failures in case of previously failing tests
(e.g. during development) remove the temporary directories holding
tets results before execution!
these are built on top of beakerlib and we use its internal
protocol to figure out the result without relying on the full
test runner that is tipically used inside of a RHEL environment!
Includes a disabled test snippet for Issue #460
Brian C. Lane
Vendula Poncova
David Shea
Lars Karlitski
Alexander Todorov
Stef Walter