removekmod GLOB [GLOB...] --allbut KEEPGLOB [KEEPGLOB...]
This can be used to remove kernel modules from under
/lib/modules/*/kernel/ while keeping specific items. This should be
easier than constructing find arguments to select the right things to
save.
Use the same stage2 location for all arches, put it in images with all
the other images. This only effects boot.iso, live images still use
LiveOS/squashfs.img because that's where dracut's 90dmsquashfs-live
module expects to find it.
For boot.iso anaconda-dracut handles finding stage2, looking at
images/install.img and LiveOS/squashfs.img
This package no longer contains anything that we actually use. Removing
it also removes gnome-themes, which we needed for the metacity theme but
which is now handled by anaconda, and gtk2-engines.
fedora-gnome-theme provides gnome-themes-standard, from which we remove
everything except a metacity theme file that metacity doesn't actually
use. Remove fedora-gnome-theme entirely and manually add the font
dependency that it was pulling in.
--make-pxe-live target generate live squashfs and initrd for pxe boot.
Also generates pxe config template.
--make-ostree-live is used for installations of Atomic Host. Additionally to
--make-pxe-live it ensures using deployment root instead of physical root of
installed disk image where needed. Atomic installation needs to be virt
installation with /boot on separate partition (the only way supported by
Anaconda currently). Content of boot partition is added to live root fs so that
ostree can find deployment by boot configuration.
Virtual machines easily get starved for randomness, and Anaconda insists
on sufficient amounts of entropy when the user requests LUKS disk
encryption. As a result, such installations can hang until Anaconda gives
up (after 10 minutes) and makes do with whatever entropy is available.
The virtualization host can feed randomness to the guest, unblocking the
installation. However, the guest can only consume that randomness through
the virtio-rng module. Let's not remove that module.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brian C. Lane <bcl@redhat.com>
Resolves: rhbz#1179000
As of fedora kernel kernel-3.17.4-302.fc21 aarch64 can sort out what to
use for the console on its own, so drop the console= from the aarch64
grub2-efi.cfg template.
Older versions of petitboot don't understand the for loop and won't
boot. We also don't shipt 32 bit media anymore so there is no reason
for this to remain.
To make it easier for users to add product and updates images look for
any packages that provide lorax-product-* or lorax-updates-*
Related: rhbz#1155228
This reverts commit bc9b40f18f.
anaconda-21.48.14-1 will revert to the below behavior, so remove the virtual
provide that was added for F21 Alpha/Beta.
You must include a repo in your installation environment that has an id
matching the lower case first part of your product name when split at the '-'
character.
If you don't do that closest mirror will not work.
For Fedora products this means including ONE repo with an id of
'fedora'.
With these templates if a package has installed files in
/usr/share/lorax/product or /usr/share/lorax/updates/ they will be used
to create product.img and/or updates.img which will be included in the
images/ directory of the iso and of the final output tree.
These can be used to customize the installation environment or provide
updates. See README.product for current documentation.
We started including it as an unintended side-effect of commit 9ca487f8.
lvm doesn't like it when there are multiple 'global' sections in lvm.conf,
and we add one right at the end of that block. We expect ours to be the
file's only content.
The help content path has been changed to /usr/share/anaconda/help,
so this Lorax change is no longer needed.
This reverts commit 2bd4637336 and commit 05ebf4ffcd.
We have shim and grub working together on aarch64 now, so we may as well
use them.
(this also makes the case of boot${arch}.efi not mixed-case, which
should guarantee it's in FAT rather than VFAT...)
Related: rhbz#1100048
Signed-off-by: Peter Jones <pjones@redhat.com>
A string passed to runcmd cannot contain a pipe character. So instead
of further find magic, I'm just going to move the directory out of the
way, take care of the deletion, and then move it back.
at-spi is the old accessibility library, deprecated in these gtk3 times
by at-spi2-atk. at-spi-corba has been replaced with atk-bridge.
at-spi2-atk is a dependency of gtk3, so there's no need to explicitly
add it.
This is a virtual provides that should install the product specific yum
repo files in /etc/yum.repos.d/ with the one matching the product name
enabled. Eg. fedora-server.repo with an id of fedora-server and
enabled=1
Anaconda will then use this repository when 'Closest Mirror' is selected
as the installation source.
Signed-off-by: Brian C. Lane <bcl@redhat.com>
The installation from DVD on s390x needs setting the target disks and
network information that are usually set by editing the generic.prm file.
By including the "rd.cmdline=ask" parameter dracut will open a simple
dialog so the user can enter the required information.
Update the templates and configuration files to support grub2 live
image creation.
Related: rhbz#1102318
Related: rhbz#1131199
(cherry picked from commit da8326fd58)
The ppc config files were missing from the live config_files directory
and ppc needs the correct lib directory so lmc has been switched to use
ArchData driven from the installed kernel arch.
Resolves: rhbz#1102318
(cherry picked from commit 59f256e989)
This reverts commit f3f2aa4851.
The addon does not currently work, reverting it until it does and has
been tested so that it doesn't block further Fedora work by breaking the
installer iso.
The settings in /apps/metacity/general are now covered by gsettings in
org.gnome.desktop.wm.preferences. The keybinding settings are already
covered by the overrides for org.gnome.desktop.wm.keybindings.
Spaces cause various bugs like #923374 and #855849 , and it would be
better if we just didn't use them.
Note that there's a corresponding pungi change to go with this.
Signed-off-by: Peter Jones <pjones@redhat.com>
rpm-ostree is a new payload type available in Anaconda, will be used
by Project Atomic (http://projectatomic.io) builds and the new Fedora
Cloud Docker Host.
dnf has previously existed, but as it's only required at installation
time, let's move it here as well.
Per discussion on the anaconda list, we don't want to pull these in as
a dependency of the "anaconda" package as initial-setup -> anaconda
which means they end up on every system.
mkefiboot uses pylorax.imgutils, in order to capture information about
umount problems it needs to be run with --debug. This triggers the fuser
call to show what is holding the mount open.
Update the templates and config file to better support EFI on aarch64
on 64-bit ARM.
Resolves: rhbz#1067671
Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Brian C. Lane <bcl@redhat.com>
Right now, logind reserves tty6 for a login shell, which is not what we
want - normally anaconda puts Xorg there, and there's no need for a
login prompt anyway.
This configures logind to activate "anaconda-shell@.service" when a user
switches to an unused tty, and reserves tty2 for that purpose (which is
where users expect a shell anyway).
This will avoid us having login prompts that users don't know what to do
with. It also probably saves us a little bit of RAM.
Some things need grubby. But they don't want to require them. So we make
sure it is available for other packages to use while building the
images.
Note that it is still removed in the cleanup script, and when installing
a system the grubby used will be the one pulled from the install repo.
Currently, yaboot is the ISO boot loader in fedora and the Fedora on
POWER team is making an effort in order to replace it by GRUB2 in the
F20 release cycle. I'm sending a lorax patch so you guys can comment
on it. I'm planning to create a feature page for that too.
This patch only change the lorax template for ppc and should not
affect other archs, like x86.
--
Paulo Flabiano Smorigo
Software Engineer
Linux Technology Center - IBM Systems & Technology Group
The system-wide spice guest agent, spice-vdagentd, normally uses
systemd-logind to determine which of the per-session spice-vdagent
instances it should be communicating with. On the non-live media, the X
session isn't registered with systemd-logind, so instead start
spice-vdagentd with -X to disable the systemd-logind integration and
serve instead to a single spice-vdagent.
Conditionalize shim and grub2-efi and whatnot on being x86_64 for now -
at some point they'll turn into "efi architectures" and maybe even split
for SB vs not SB, but for now, this is fine.
Signed-off-by: Peter Jones <pjones@redhat.com>
The xkeybard-config .mo files are needed to translate the layout
switching options. The xklavier calls in anaconda will automatically
translate the option strings as long as the translations are present.
In fips mode creation of the protocol 1 key causes it to hang. This
removes the explicit HostKey entries and lets sshd decide which keys to
create when it starts.
Add a command that opens the anaconda.log file located in /tmp
with less. The command is added as the most recently used.
Signed-off-by: Martin Kolman <mkolman@gmail.com>
It's pretty pointless to copy data from /run/log/journal to
/var/log/journal, since both of those are in-memory filesystems.
This should somewhat reduce RAM use during installation.
Resolves this error on s390x:
...
running runtime-install.tmpl
installpkg modutils failed: No package(s) available to install
Looking for extra fedup-dracut packages...
...
dracut tries to build hostonly initrd by default without the nohostonly
package/config; this results in a bunch of error messages about missing
files in proc and sys, and then the resulting initrd doesn't work 'cuz
it doesn't have any drivers for anything.
Make kernel args the same in every config.
Put 'quiet' at the end of the line - it's usually the first thing a user removes when debugging.
Fill missing product versions in.
Distinguish between 'install' (installation media) and 'start' (live media).
The list of ARM platforms was represented as a static list to be
installed in .treeinfo for Beaker support, but as ARM moves to use
the multiplatform kernel the platform specific kernel images will
no longer be needed. This process is beginning in F18 (3.7 kernel)
with HighBank being the first to use the baseline kernel. Due to
this change, there will be no 'highbank' platform images, but Beaker
tries to import all platforms listed in .treeinfo. To avoid errors,
we should dynamically create the list of ARM plaforms, including
only those that are actually provided.
Signed-off-by: David A. Marlin <dmarlin@redhat.com>
For ARM systems that require U-Boot wrapped images,
perform mkimage to create one for 'upgrade.img'.
Signed-off-by: David A. Marlin <dmarlin@redhat.com>
