To maintain consistency with the other options this changes firewall to
combine the existing settings from the image template with the settings
from the blueprint.
Also updated the docs, added a new test for it, and sorted the output
for consistency.
(cherry picked from commit 3e08389a0f)
(cherry picked from commit 9d48aa4d92)
Make it clear that the services are added to services already listed in
the image templates, and that you can specify any systemd unit filename.
Older releases are more restrictive, and this documentation will need to
be updated when these changes are backported.
(cherry picked from commit 4f701e7e92)
(cherry picked from commit 80281c7ad4)
Add support for enabling and disabling systemd services in the
blueprint. It works like this:
[customizations.services]
enabled = ["sshd", "cockpit.socket", "httpd"]
disabled = ["postfix", "telnetd"]
They are *added* to any existing settings in the kickstart templates.
(cherry picked from commit 1111aee92d)
(cherry picked from commit 69cc1b17f2)
You can now open ports in the firewall, using port numbers or service
names:
[customizations.firewall]
ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"]
Or enable/disable services registered with firewalld:
[customizations.firewall.services]
enabled = ["ftp", "ntp", "dhcp"]
disabled = ["telnet"]
If the template contains firewall --disabled it cannot be overridden,
under the assumption that it is required for the image to boot in the
selected environment.
(cherry picked from commit 4d35668ab5)
(cherry picked from commit 9f1756cc27)
You can now set the keyboard layout and language. Eg.
[customizations.locale]
languages = ["en_CA.utf8", "en_HK.utf8"]
keyboard = "de (dvorak)"
Existing entries in the kickstart templates are replaced with the new
ones. If there are no entries then it will default to 'keyboard us' and
'lang en_US.UTF-8'
Includes tests, and leaves the existing keyboard and lang entries in the
templates with a note that they can be replaced by the blueprint.
(cherry picked from commit e5a8700bdf)
(cherry picked from commit 49259c607b)
This fixes the customizations list problem earlier than in
add_customizations.
In the recipe it should be [customizations] not [[customizations]]
which creates a list. If it was used that way grab the first element and
replace the list with it.
(cherry picked from commit 67007dfa60)
(cherry picked from commit 84a9fcccde)
For example:
[customizations.timezone]
timezone = "US/Samoa"
ntpservers = ["0.pool.ntp.org"]
Also includes tests.
This removes the timezone kickstart command from all of the templates
except for google.ks which needs to set it's own ntp servers and timezone.
If timezone isn't included in the blueprint, and it is not already in a
template, it will be set to 'timezone UTC' by default.
If timezone is set in a template it is left as-is, under the assumption
that the image type requires it to boot correctly.
(cherry picked from commit 9bdbb29662)
(cherry picked from commit 40150508b8)
The goal here is to do the minimum needed to get the images setup for
use so they can have more complex customizations applied later.
I think this list is a pretty good minimal set of features without going
full kickstart.
(cherry picked from commit 95c288d829)
(cherry picked from commit e682d309ed)
Otherwise other tests will also fail when they try to run from the wrong
directory.
(cherry picked from commit 65b8a2be68)
(cherry picked from commit 94e2651cf6)
> bcl: this should really be [[packages]] since [[modules]] is
> going to change to actual modules at some point
(cherry picked from commit 933fad9ded)
(cherry picked from commit eb4a8ac3b1)
- verify SemVer .patch number will be automatically updated when
we push the blueprint a second time without changing version
- verify show displays the content in TOML format and it matches
what is on disk. Because of that also start with empty packages
and groups fields in the initial toml. If they are missing they
will be added automatically by lorax-composer and this simplifies
the test
- verify delete works
(cherry picked from commit 7cbb324ae5)
(cherry picked from commit ce549d861d)
Fixes related to a few issues in the locked root account test I somehow
managed to overlook in the initial commit.
(cherry picked from commit 209bdd6911)
(cherry picked from commit 08ae3613fe)
The original "recipes" term is indicated in the composer-cli description,
but the identifier has been changed to "blueprints" with later releases.
This commit changes the string to "blueprints".
(cherry picked from commit 613d91299d)
(cherry picked from commit 4045c0c476)
Instances, Volumes, Snapshots, AMIs and s3 objects with the "keep_me" tag will
not be deleted automatically even if they are older then the specified time limit.
(cherry picked from commit db7b1e4fcd)
(cherry picked from commit 0029f23b0e)
This compose type creates a partitioned disk as a qcow2 file, but with
only one partition instead of using a separate /boot.
(cherry picked from commit 44e14176bb)
(cherry picked from commit 0f59e576d8)
This is based on the VHD compose type, with the following differences:
* Use the vhdx format instead of vhd
* No WALinuxAgent
* Install hyperv-daemons
The hyperv-daemons are activated through udev rules, so there is no need
to add them to the services line.
(cherry picked from commit 434fe58c28)
(cherry picked from commit 367c2583e4)
This option will create an optionally compressed tarball containing a
disk image. This format is used by Google's Compute Engine.
This also adds a new option, tar_disk_name, to set the name of the disk
image that will be wrapped in the final tarball. opts.image_name
continues to be the final output file name.
(cherry picked from commit c941b82b0c)
(cherry picked from commit 121717ac4a)
Modify imgutils.compress to allow the "rootdir" argument to be either a
directory or a single file to add to an archive.
(cherry picked from commit c585b91422)
(cherry picked from commit 5308e7bfec)
If provided, round the disk image size up to a multiple of the value.
This allows for image formats with specific size-alignment requirements
(e.g., disk size must be in GiB).
(cherry picked from commit 8ef4f431d8)
(cherry picked from commit b2a33d5654)
Make sure that dotfiles are installed when not directly under /
Make sure / is not packaged in the rpm (it will cause a conflict with
the filesystem package).
Make sure that using destination="/" works
(cherry picked from commit 6fd06c6931)
(cherry picked from commit d5d60ebe6d)
rpmfluff was including / in the rpm, which conflicts with
filesystem.rpm
The rpm globs are pretty limited, and we don't actually know the file
paths until later, so we have to use a glob or a directory.
So when the destination is / it now uses /* to select all the files and
sub-directories in the archive. The limitation of this is that it cannot
support dotfiles directly under /, they will cause a rpmbuild error.
For destinations other than / it uses the name of the directory, so
dotfiles are fine in that situation.
(cherry picked from commit 049f68cb60)
(cherry picked from commit 4073dd4e4d)
Change the docs-in-docker target to generate the docs for the NEXT
release, not the current one. Also pass in uid/gid so that the new files
can be set to the correct ownership instead of root.
Modify docs/conf.py to bump the version of the docs if
LORAX_VERSION=next is set in the environment.
(cherry picked from commit 2acd13d612)
(cherry picked from commit a71ef40dd5)
The root account checks are applied to generated and deployed images
to make sure that root account is locked, except for live ISO.
(cherry picked from commit 655e7e40c0)
(cherry picked from commit 7c093ecbb4)
- Check final-kickstart.ks for the rpm source
- Check final-kickstart.ks for the rpm package name and version
- Make sure depsolve works
- Make sure errors from a bad repo are returned correctly
- Make sure errors from a bad reference are returned correctly
This moves _wait_for_status into a helper function so it can be shared
between the test classes.
(cherry picked from commit 8c2184d59e)
(cherry picked from commit 78f79a94ec)
Log them and report them as RuntimeError. Also add a couple tests for
them.
(cherry picked from commit 61efa91a03)
(cherry picked from commit 087b0fe8c6)
The freeze function was not being tested. Add a test for it using the
repos.git test recipe.
(cherry picked from commit c26477a63c)
(cherry picked from commit bdf5572bc6)
This hooks up creation of the rpm to the build, adds it to the
kickstart, and passes the url to Anaconda. The dnf repo with the rpms is
created under the results directory so it will be included when
downloading the build's results.
(cherry picked from commit cd8c884adb)
(cherry picked from commit 2e596010d3)
This handles creating the rpm from the dictionary describing the
repository and rpm. Also adds tests for archive and rpm creation.
(cherry picked from commit f6f2308765)
(cherry picked from commit efc77c1d71)
This adds support, documentation, and testing for a [[repos.git]]
blueprint section that can be used to install files from a git
repository. It will create an rpm that will be added to the build,
and included in the metadata that can be downloaded. This allows you to
accurately keep track of the source of configuration files and extra
metadata that is added to the build.
The source repo and reference will be listed in the rpm's summary making
it easy to discover on the installed system.
(cherry picked from commit d7b96c8f0f)
(cherry picked from commit 047f174dcf)
Whatever was pulling them in has stopped so we need to add them to the
list.
(cherry picked from commit 5f530bd501)
(cherry picked from commit de99a43485)
