These weren't built until after 8.0.0, which they were approved for, and
even though they have all acks, it's for the wrong release so the build
system complains when they end up back in lorax.spec
This makes sure that required fields are included, and that sections are
not empty. It does not check for all optional fields.
If there are errors it will gather up all of them and then raise a
RecipeError with a string of all the errors.
(cherry picked from commit 61059a2699)
Resolves: rhbz#1716596
The 'enabled' field in the /compose/types output now reflects whether or
not the type is supported on the current architecture. Disabled types
are not allowed to be built, and will raise an error like:
Compose type 'alibaba' is disabled on this architecture
Resolves: rhbz#1751998
* If `$COCKPIT_BOTS_REF` is set, check out that bots version instead of
master.
* Use git cache in $XDG_CACHE_HOME if available. Our CI uses that to
save downloads, and it does not get in the way for local developers.
Adapted from https://github.com/cockpit-project/starter-kit/pull/233
Cherry-picked from master commit a2c67385e4.
Previously it was looping, waiting for FINISHED|FAILED but was not
actually failing the test if the compose failed to build.
This adds a function to check the status of the compose and calls it
after each compose.
(cherry picked from commit d0e947fe3b)
Related: rhbz#1724073
export BLUEPRINTS_DIR for use in tests
Depending on the way the tests are run the directory may be a temporary
dir, or it may be the standard /var/lib/lorax/... path.
Related: rhbz#1714103
Make sure that dotfiles are installed when not directly under /
Make sure / is not packaged in the rpm (it will cause a conflict with
the filesystem package).
Make sure that using destination="/" works
(cherry picked from commit 6fd06c6931)
Related: rhbz#1709594
rpmfluff was including / in the rpm, which conflicts with
filesystem.rpm
The rpm globs are pretty limited, and we don't actually know the file
paths until later, so we have to use a glob or a directory.
So when the destination is / it now uses /* to select all the files and
sub-directories in the archive. The limitation of this is that it cannot
support dotfiles directly under /, they will cause a rpmbuild error.
For destinations other than / it uses the name of the directory, so
dotfiles are fine in that situation.
(cherry picked from commit 049f68cb60)
Related: rhbz#1709594
- Check final-kickstart.ks for the rpm source
- Check final-kickstart.ks for the rpm package name and version
- Make sure depsolve works
- Make sure errors from a bad repo are returned correctly
- Make sure errors from a bad reference are returned correctly
This moves _wait_for_status into a helper function so it can be shared
between the test classes.
(cherry picked from commit 8c2184d59e)
Related: rhbz#1709594
The freeze function was not being tested. Add a test for it using the
repos.git test recipe.
(cherry picked from commit c26477a63c)
Related: rhbz#1709594
This hooks up creation of the rpm to the build, adds it to the
kickstart, and passes the url to Anaconda. The dnf repo with the rpms is
created under the results directory so it will be included when
downloading the build's results.
(cherry picked from commit cd8c884adb)
Related: rhbz#1709594
This handles creating the rpm from the dictionary describing the
repository and rpm. Also adds tests for archive and rpm creation.
(cherry picked from commit f6f2308765)
Related: rhbz#1709594
This adds support, documentation, and testing for a [[repos.git]]
blueprint section that can be used to install files from a git
repository. It will create an rpm that will be added to the build,
and included in the metadata that can be downloaded. This allows you to
accurately keep track of the source of configuration files and extra
metadata that is added to the build.
The source repo and reference will be listed in the rpm's summary making
it easy to discover on the installed system.
(cherry picked from commit d7b96c8f0f)
Resolves: rhbz#1709594
It's necessary to make sure the blueprints directory doesn't contain
the git/ directory before the tests are run, so that we can just simply
modify the blueprint files without using blueprints push.
Related: rhbz#1714298
`setup_tests()` expected BLUEPRINTS_DIR to be set, but it wasn't when
running in automated mode (with $CLI set).
Fix this and move share and blueprint dirs to function arguments.
Related: rhbz#1714298
composer-cli will now output information about changes to customizations
entries and the repos.git entries.
(cherry picked from commit 156ef0acfd)
Related: rhbz#1709595
This also includes extensive tests for each of the currently supported
customizations. It should be generic enough to continue working as long
as the list of dicts includes a 'name' or 'user' field in the dict.
Otherwise support for a new dict key will need to be added to the
customizations_diff function.
(cherry picked from commit 850c490b6e)
Related: rhbz#1709595
To maintain consistency with the other options this changes firewall to
combine the existing settings from the image template with the settings
from the blueprint.
Also updated the docs, added a new test for it, and sorted the output
for consistency.
(cherry picked from commit 3e08389a0f)
Resolves: rhbz#1709595
Make it clear that the services are added to services already listed in
the image templates, and that you can specify any systemd unit filename.
Older releases are more restrictive, and this documentation will need to
be updated when these changes are backported.
(cherry picked from commit 4f701e7e92)
Related: rhbz#1709595
Add support for enabling and disabling systemd services in the
blueprint. It works like this:
[customizations.services]
enabled = ["sshd", "cockpit.socket", "httpd"]
disabled = ["postfix", "telnetd"]
They are *added* to any existing settings in the kickstart templates.
(cherry picked from commit 1111aee92d)
Related: rhbz#1709595
You can now open ports in the firewall, using port numbers or service
names:
[customizations.firewall]
ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"]
Or enable/disable services registered with firewalld:
[customizations.firewall.services]
enabled = ["ftp", "ntp", "dhcp"]
disabled = ["telnet"]
If the template contains firewall --disabled it cannot be overridden,
under the assumption that it is required for the image to boot in the
selected environment.
(cherry picked from commit 4d35668ab5)
Related: rhbz#1709595
You can now set the keyboard layout and language. Eg.
[customizations.locale]
languages = ["en_CA.utf8", "en_HK.utf8"]
keyboard = "de (dvorak)"
Existing entries in the kickstart templates are replaced with the new
ones. If there are no entries then it will default to 'keyboard us' and
'lang en_US.UTF-8'
Includes tests, and leaves the existing keyboard and lang entries in the
templates with a note that they can be replaced by the blueprint.
(cherry picked from commit e5a8700bdf)
Related: rhbz#1709595
This fixes the customizations list problem earlier than in
add_customizations.
In the recipe it should be [customizations] not [[customizations]]
which creates a list. If it was used that way grab the first element and
replace the list with it.
(cherry picked from commit 67007dfa60)
Related: rhbz#1709595
For example:
[customizations.timezone]
timezone = "US/Samoa"
ntpservers = ["0.pool.ntp.org"]
Also includes tests.
This removes the timezone kickstart command from all of the templates
except for google.ks which needs to set it's own ntp servers and timezone.
If timezone isn't included in the blueprint, and it is not already in a
template, it will be set to 'timezone UTC' by default.
If timezone is set in a template it is left as-is, under the assumption
that the image type requires it to boot correctly.
(cherry picked from commit 9bdbb29662)
Related: rhbz#1709595
The goal here is to do the minimum needed to get the images setup for
use so they can have more complex customizations applied later.
I think this list is a pretty good minimal set of features without going
full kickstart.
(cherry picked from commit 95c288d829)
Related: rhbz#1709595
